tri-clover miscellaneous valves - flow componentsflowcomponents.com/brochure alfalaval/misc...
TRANSCRIPT
3© 2000 Tri-Clover, Inc.
Sanitary fittings identified with this symbol on the following pages are accepted as meeting the 3A sanitary standards by the appropriatecommittees of the International Association of Milk, Food and Environmental Sanitarians, U.S. Public Health Service, and Dairy IndustryCommittee.
NOTE: Catalog product presentations including cataloged dimensions, designs and specifications are representative of product availability at time ofpublication only. Actual geometry, dimensions, and designs are subject to design and manufacturing changes without notice.
Tri-Clover® Miscellaneous Valves
IntroductionThe complete line of products offered by Tri-Clover, Inc. for the food, beverage, dairy and bio-pharmaceutical process industries include the Tri-Clover C and CL series of centrifugal pumps,PR and T series positive displacement pumps, 700 series air operated seat valves, Saundersdiaphragm valves, Tri-Clamp® and Tri-Weld® fittings, Mainstream® and Streamline® filter/strainers, and Tri-Blender® powder/liquid blending system. These products are well known andsynonymous with Tri-Clover.
Less visible components such as the plug valve, pressure relief valve, and check valve are also vitalto the operation of any processing system. These miscellaneous valves are given the same degreeof attention in manufacture and quality control as the more prestigious products, such as pumpsand air operated seat valves.
Ordering InformationSizes and material options vary with each type of valve. Specific information is listed for eachvalve type. Basic instructions for ordering are as follows:
Specify complete part number including: description code, size, and material (if more than oneoption is available).
MODEL NUMBER EXAMPLE
D10MPR - 1 - 316L
321
DESCRIPTION1
t MATERIAL
304316L
SIZE
1" (25.4 mm)1½" (38.1 mm)2" (50.8 mm)2½" (63.5 mm)3" (76.2 mm)4" (101.6 mm)
Availability of sizes varieswith each valve type.
000 0 000
3
2
For Example:D60YRMP-1½-316L = Y-Type Compression valve with molded rubber seat, 1½" Tri-Clamp® connec-tions and 316L material.
A30SMP-2½-316L-SFY= Sample cock, 2½" Tri-Clamp® connections, 316L material and SFY elastomers.
DL10WWR-2-316L = Two way plug valve (rubber plug) with 2" Buttweld connections, 316L material.
62-326-B-3-316L = Air-blow check valve, 4000 cubic feet/hour capacity, rubber hose adapter, 3" Tri-Clamp®
connection and 316L material.
4
Compression & Relief Valves (Manual)Manual valves designed to relieve pressure, sample, or shut off flow
Typesn Shut Off (L-Body, Y-Body)n Relief (L-Body)n Sample
Seat Materialsn Molded Rubber (BUNA, EPDM, SFY)n Metal (Not Available for Sample Valves)
End Connectionsn Tri-Clamp®
Sizesn Shut-Off/Relief (1" - 3")n Sample (1½" - 3")
Valve Body Materialn 316L S.S.
5
Compression Valves (T-Type)
Material: 316L Stainless SteelEnd Connection: Tri-Clamp®
B
A
A
All dimensions are for identification purposes only.
Relief Valves
Material: 316L Stainless Steel (Hex Union Nut is 304 S.S.)End Connection: Tri-Clamp®
Std. spring rate is 5-25 psi (5-15 psi on 1").Contact Tri-Clover for optional relief spring ranges.
D60TRMP-Size, Molded Rubber SeatD60TMP-Size, Metal Seat
Size(TubeOD) A
BApprox.
Wt.Min. Max.
in mm in mm in mm in mm lb kg
1 25.4 2³⁄₈ 60.3 5¹⁄₈ 130.2 6¹⁄₄ 158.8 2.50 1.13
1¹⁄₂ 38.1 2³⁄₄ 69.9 6⁷⁄₈ 174.6 8¹⁄₂ 215.9 5.25 2.38
2 50.8 3¹⁄₂ 88.9 7³⁄₈ 185.7 9¹⁄₂ 241.3 7.30 3.31
2¹⁄₂ 63.5 3¹⁄₂ 88.9 8⁷⁄₈ 225.4 11¹⁄₂ 292.1 11.4 5.17
3 76.2 3³⁄₄ 95.3 9¹⁄₄ 235 12³⁄₈ 314.3 15.5 7.03
D60RTHMP-Size, Metal Seat - only
Size(TubeOD) A
BApprox.
Wt.Min. Max.
in mm in mm in mm in mm lb kg
1 25.4 2³⁄₈ 60.3 5³⁄₈ 136.5 6¹⁄₂ 165.1 1.88 0.85
1¹⁄₂ 38.1 2³⁄₄ 69.9 7³⁄₈ 185.7 9 228.6 3.99 1.81
2 50.8 3¹⁄₂ 88.9 7⁵⁄₈ 193.7 9⁵⁄₈ 244.5 5.49 2.49
2¹⁄₂ 63.5 3¹⁄₂ 88.9 9⁷⁄₈ 250.0 12 304.8 8.56 3.88
3 76.2 3³⁄₄ 95.3 11¹⁄₈ 282.6 13⁷⁄₈ 352.4 12.13 5.50
6
Sample Cocks
Bevel Seat
Material: 316L Stainless Steel
All dimensions are for identification purposes only.
Compression Valves (Y-Type)
Material: 316L Stainless SteelEnd Connection: Tri-Clamp®
A
B
Tri-Clamp®
D60YRMP-Size, Molded Rubber SeatD60YMMP-Size, Metal Seat
Size(Tube OD) A
BApprox.
Wt.Min. Max.
in mm in mm in mm in mm lb kg
1 25.4 5³⁄₈ 136.5 5³⁄₄ 146.1 6³⁄₈ 161.9 2.25 1.02
1¹⁄₂ 38.1 6³⁄₈ 161.9 8 203.2 9⁵⁄₈ 244.5 6.30 2.86
2 50.8 7⁷⁄₈ 200.0 8³⁄₄ 222.3 11 279.4 9.90 4.49
2¹⁄₂ 63.5 9¹⁄₄ 235.0 10³⁄₈ 263.5 13¹⁄₂ 342.9 18.0 8.16
3 76.2 10³⁄₈ 263.5 12¹⁄₂ 317.5 16³⁄₈ 415.9 26.1 11.8
Type-Size
Size(TubeOD)
A30SMPTri-Clamp
A
A30SABevel Seat
AApprox.
Wt.
in mm in mm in mm lb kg
1¹⁄₂ 38.1 2 50.8 1⁷⁄₈ 47.6 1.00 0.45
2 50.8 2¹⁄₂ 63.5 2³⁄₈ 60.3 1.06 0.48
3 76.2 3¹⁄₂ 88.9 -- -- -- --
7
Plug Valves
n Designed for low pressure and temperatureapplications (less than 25psig, max. 100° F).
n Designed for use with non-hazardous prod-ucts and are subject to leakage due to normaloperating and cleaning procedures (COP, “CleanOut of Place.”)
n Rubber compound is FDA approved BUNA forplug material.
n Pasteurizer Leak Detect type is approved for tank pasteurizer valves.
Sizesn Sizes range from 1" to 3" (see each type for specific sizes available)
End Connectionsn Tri-Clamp® weld or Bevel Seat (see each type for specific end connections available)
Valve Body Materialn 316L or 304
8
Plug Valves
Material: 316L or 304 stainless steel (316L and S for 304 in part number).
Tri-Clamp Two-WayD10MPR-Size-Mat'l, Rubber Plug
D10MP-Size-Mat'l, Metal Plug
Tri-Clamp Three-WayD11MPR-Size-Mat'l, Rubber Plug
D11MP-Size-Mat'l, Metal Plug
Size(Tube OD) A B C D E
Approx.Wt.
in mm in mm in mm in mm in mm in mm lb kg
1 25.4 2⁹⁄₃₂ 57.9 4⁹⁄₁₆ 115.9 5³⁄₄ 146.1 4¹⁄₂ 114.3 2³⁄₈ 60.3 4.50 2.04
1¹⁄₂ 38.1 2²⁹⁄₃₂ 73.8 5¹³⁄₁₆ 147.6 7 177.8 5⁵⁄₈ 142.9 2¹⁄₂ 63.5 9.50 4.30
2 50.8 3¹³⁄₃₂ 86.5 6¹³⁄₁₆ 173.0 7⁵⁄₈ 193.7 5⁵⁄₈ 142.9 2⁷⁄₈ 73.0 15.50 7.03
2¹⁄₂ 63.5 4¹⁄₈ 104.8 8¹⁄₄ 209.6 8³⁄₄ 222.3 6¹⁄₄ 158.8 3¹⁄₂ 88.9 25.50 11.56
3 76.2 4²³⁄₃₂ 119.9 9⁷⁄₁₆ 239.7 9³⁄₄ 247.7 7¹⁄₄ 184.2 3³⁄₄ 95.3 36.00 16.32
All dimensions are for identification purposes only.
9
Material: 316L or 304 stainless steel (316L and S for 304 in part number).
Plug Valves
All dimensions are for identification purposes only.
Bevel Seat Two-WayD10CR-Size-Mat'l, Rubber Plug
D10C-Size-Mat'l, Metal Plug
Bevel Seat Three-WayD11CR-Size-Mat'l, Rubber Plug
D10C-Size-Mat'l, Metal Plug
Size(Tube OD) A B C D E
Approx.Wt.
in mm in mm in mm in mm in mm in mm lb kg
1¹⁄₂ 38.1 2²⁹⁄₃₂ 73.8 5¹³⁄₁₆ 147.6 6⁷⁄₈ 174.6 5⁵⁄₈ 142.9 2¹⁄₂ 63.5 9.50 4.31
2 50.8 3¹³⁄₃₂ 86.5 6¹³⁄₁₆ 173.0 7⁵⁄₈ 193.7 5⁵⁄₈ 142.9 2⁷⁄₈ 73.0 15.50 7.03
2¹⁄₂ 63.5 4¹⁄₈ 104.8 8¹⁄₄ 209.6 8⁵⁄₈ 219.1 6¹⁄₄ 158.8 3¹⁄₂ 88.9 25.50 11.56
3 76.2 4²³⁄₃₂ 119.9 9⁷⁄₁₆ 239.7 9³⁄₄ 247.3 7¹⁄₄ 184.2 3³⁄₄ 93.7 36.00 16.33
10
Plug Valves
Tri-Weld Two-WayDL10WWR-Size-Mat'l, Rubber Plug
DL10WW-Size-Mat'l, Metal Plug
Tri-Weld Three-WayDL11WWR-Size-Mat'l, Rubber Plug
DL11WW-Size-Mat'l, Metal Plug
Size(Tube OD) A B C D E
Approx.Wt.
in mm in mm in mm in mm in mm in mm lb kg
1¹⁄₂ 38.1 2²³⁄₃₂ 69.1 5⁷⁄₁₆ 138.1 6⁷⁄₈ 174.6 5⁵⁄₈ 142.9 2¹⁄₂ 63.5 9.50 4.31
2 50.8 3³⁄₁₆ 81.0 6³⁄₈ 161.9 7⁵⁄₈ 193.7 5⁹⁄₁₆ 141.3 2⁷⁄₈ 73.0 15.50 7.03
2¹⁄₂ 63.5 4⁷⁄₈ 123.8 7³⁄₄ 196.9 8⁵⁄₈ 219.1 6¹⁄₄ 158.8 3¹⁄₂ 88.9 25.50 11.56
3 76.2 4¹⁵⁄₃₂ 113.5 8¹⁵⁄₁₆ 227 9³⁄₄ 247.7 7¹⁄₄ 184.2 3³⁄₄ 95.3 36.00 16.33
Material: 304 stainless steel
Caution: Butt-Weld End Dimension is minimum center to face length and will requireskillful welding techniques and proper cooling of valve body to prevent warpage. Longerextension available to meet specific requirements. (Price and delivery on application.)
All dimensions are for identification purposes only.
D
C
E
AB
D
C
E
AB
11
Storage Tank/Pasteurizer Valves
D10F-Size, Metal PlugD10FR-Size, Rubber Plug
Size(Tube OD) A B C D E F G H I J K
HoleSize
Approx.Wt. Lbs.
1¹⁄₂ 4⁵⁄₁₆ 3¹⁄₈ 5⁵⁄₈ 2³⁄₈ 6³⁄₄ 1²³⁄₃₂ 3⁷⁄₁₆ — — — — ⁹⁄₁₆ 9.00
2 5⁷⁄₁₆ 4¹⁄₈ 5⁵⁄₈ 2³⁄₄ 7¹⁄₂ 2¹⁄₈ 4¹⁄₄ — — — — ⁹⁄₁₆ 18.30
2¹⁄₂ 6³⁄₄ 4⁵⁄₈ 6¹⁄₄ 3¹⁄₂ 8³⁄₄ 2⁵⁄₈ 5¹⁄₄ 1⁵⁄₁₆ 1¹⁄₂ 2¹⁄₂ 5 ⁹⁄₁₆ 28.80
3 8 4³⁄₄ 7¹⁄₄ 3³⁄₄ 9³⁄₄ 3⁵⁄₁₆ 6⁵⁄₈ 1³⁄₄ 1³⁄₄ 2¹³⁄₁₆ 5⁵⁄₈ ¹¹⁄₁₆ 39.50
Size(Tube OD) A B C D E F G H I J K
HoleSize
Approx.Wt. Kg.
38.1 109.5 79.4 142.9 60.3 171.5 43.7 87.3 — — — — 14.3 4.08
50.8 138.1 104.8 141.3 69.9 190.5 54.0 108.0 — — — — 14.3 8.30
63.5 171.5 117.5 157.2 88.1 219.9 66.7 133.4 33.3 38.1 63.5 127.0 14.3 13.06
76.2 203.2 120.7 182.6 93.7 246.9 84.1 168.3 4.5 44.5 71.4 142.9 17.5 17.91
Inches
Millimeters
Rubber Plug ReplacementsD10CR-Size-02X, Two-Way
D11CR-Size-02X, Three-Way
Size (Tube OD)
in mm
1¹⁄₂ 38.1
2 50.8
2¹⁄₂ 63.5
3 76.2
Includes the complete plug assembly (rubber plug, handle andstud). Field experience has shown that most stainless steel plugvalves cannot be successfully covered to rubber plug valves.Results obtained are generally not in proportion to theconversion cost or service life obtained.
Valves have 45o handle. 1½” and 2” valves have 2-hole mounting - 2½” and 3”, 4-hole mount-ing.Material: 304 (Add an “S” to designate 304 S.S.)Connection: Bevel Seat
1½" & 2" 2½" & 3"Side ViewA
C
D
E
BG
F
GF
H
I
JK
All dimensions are for identification purposes only.
D10FL-Size, Two-Way Valve with Leak Protection ( metal plug only)
12
Check Valves
n Meet 3A approvals for design
Sizesn Disc-Type Check Valve in vertical or horizontal
design, 1" to 3"n Ball Check Valve Y-Type, 1" to 3"n Air-Blow Check Valve Assemblies, 1½" to 4½"
(varies by compression rating, see each type for specificsizes available.)
End Connectionsn Disc-Type, Tri-Clamp®
n Ball Check, Tri-Clamp® or Tri-Weld®
n Air Blow, Tri-Clamp®
Ball Materialsn BUNAn EPDMn SFYn Nylon (max. 140° F)
Valve Body Materialn Ball Check Valve, 316Ln Disc-Type Check Valve, 316L or 304n Air Blow Check Valve, 316L
13
Check ValvesDisk Type
To convert to vertical valve, remove spring. One PSI or less linepressure required to overcome spring closing force.
Material Option: 316L Stainless Steel
All dimensions are for identification purposes only. See page 17 for pressure drop curves.
Material Option: 304 or 316L Stainless Steel(3" - 316L only)
B45MP-Size-Mat'l (1" through 2")A45MP-2½-Mat'l (2½" only)B45MP-A-3-316L (3" only)
Size(Tube OD) A Approx. Wt.
in mm in mm lb kg
1 25.4 5¹⁄₈ 130.1 2.25 1.02
1¹⁄₂ 38.1 5¹⁄₈ 130.1 3.25 1.59
2 50.8 5¹⁄₈ 130.1 4.83 2.19
2¹⁄₂ 63.5 6³⁄₈ 161.9 7.10 3.22
3 76.2 7¹⁄₂ 190.5 -- --
B45HMP-Size-Mat'l (1" through 2")A45HMP-2½-Mat'l (2½" only)B45HMP-A-3-316L (3" only)
Size(Tube OD) A Approx. Wt.
in mm in mm lb kg
1 25.4 7⁵⁄₈ 193.7 2.25 1.02
1¹⁄₂ 38.1 7⁹⁄₁₆ 192.1 3.25 1.59
2 50.8 7⁹⁄₁₆ 192.1 4.83 2.19
2¹⁄₂ 63.5 10⁷⁄₈ 276.2 7.10 3.22
3 76.2 7⁷⁄₁₆ 188.9 -- --
A
A
B45MP-Size-Mat'l (1" through 2")A45MP-2½-Mat'l (2½" only)B45MP-A-3-316L (3" only)
B45HMP-Size-Mat'l (1", 1½", and 2")A45HMP-2½-Mat'l (2½" only)
B45HMP-A-3-316L (3" only)
14
*Ball Material:U = Buna BallN = Nylon Ball (max. 140° F)SF = Viton BallE = EPDM Ball
45BYMP-Size-Ball Mat'l*
Size(Tube OD) A
Approx.Wt.
in mm in mm lb kg
1¹⁄₂ 38.1 8¹⁴⁄₃₂ 214.3 3.00 1.36
2 50.8 10³⁄₃₂ 256.4 3.25 1.47
2¹⁄₂ 63.5 11¹⁄₂ 292.1 7.69 3.48
3 76.2 12³⁄₈ 314.3 10.14 4.59
L45BYWW-Size-Ball Mat'l*
Size(Tube OD) A
Approx.Wt.
in mm in mm lb kg
1¹⁄₂ 38.1 8⁷⁄₈ 225.4 3.99 1.81
2 50.8 10¹⁄₂ 266.7 5.49 2.49
2¹⁄₂ 63.5 12¹³⁄₁₆ 325.4 8.56 3.88
3 76.2 13¹¹⁄₁₆ 347.7 12.13 5.50
Valve Material:316L Stainless Steel
All dimensions are for identification purposes only.
Check ValvesBall Type
A
Inlet
See page 18 for pressure drop curves.
45BY-Size-02-Ball Mat'l*, Replacement Balls
Size (Tube OD) Size (Ball)
in mm in mm
1¹⁄₂ 38.1 1⁵⁄₈ 41.3
2 50.8 2¹⁄₈ 54.0
2¹⁄₂ 63.5 3¹⁄₂ 88.9
3 76.2 4¹⁄₈ 104.8
End Connection: Tri-Clamp®
End Connection: Tri-Weld®
Inlet
15
Air-Blow Check Valves Assemblies*
Check Valve Capacity Rating 1600 Cubic Ft./Hour Air Volume(Overall Length)
ConnectionSize
62-174R-A-Size,Quick Couple
Adapter(“A” Adapter)
62-174R-B-Size,Rubber Hose
Adapter(“B” Adapter)
62-174R-C-Size,Female NPT
Adapter(“C” Adapter)
in mm in mm in mm in mm
1¹⁄₂ 38.1 2¹⁄₂ 63.5 3 76.2 2 50.8
2 50.8 2¹⁄₂ 63.5 3 76.2 2 50.8
2¹⁄₂ 63.5 2¹⁄₂ 63.5 3 76.2 2 50.8
3 76.2 2¹⁄₂ 63.5 3 76.2 2 50.8
4 101.6 2¹⁄₂ 63.5 3 76.2 2 50.8
4¹⁄₂ 114.3 2¹⁄₂ 63.5 3 76.2 2 50.8
Check Valve Capacity Rating 4000 Cubic Ft./Hour Air Volume(Overall Length)
ConnectionSize
62-326-A-Size,Quick Couple
Adapter(“A” Adapter)
62-326-B-Size,Rubber Hose
Adapter(“B” Adapter)
62-326-C-Size,Female NPT Adapter
(“C” Adapter)
in mm in mm in mm in mm
2 50.8 3³⁄₄ 95.3 3⁵⁄₈ 92.1 2³⁄₄ 69.9
2¹⁄₂ 63.5 3³⁄₄ 95.3 3⁵⁄₈ 92.1 2³⁄₄ 69.9
3 76.2 3³⁄₄ 95.3 3⁵⁄₈ 92.1 2³⁄₄ 69.9
4 101.6 3³⁄₄ 95.3 3⁵⁄₈ 92.1 2³⁄₄ 69.9
4¹⁄₂ 114.3 3³⁄₄ 95.3 3⁵⁄₈ 92.1 2³⁄₄ 69.9
*Each air-blow check valve assembly must be used with a #FA-(size)-30C Filter Disc (notfurnished with unit). See table on Page 16.
Material: 316L Stainless Steel
Material: 316L Stainless SteelAll dimensions are for identification purposes only.
16
Air-Blow Check Valves Adapters &Filter Media
SS Perforated Discwith Buna Gasket
Filter Disc
Adapter Type For Model 62-174R For Model 62-326
“A” AdapterFor Air Line Quick
Coupler#37-80 #37-161
“B” AdapterFor 1" ID Rubber Hose #14-MPHR-1-S #14-MPHR-2 x 1-S
“C” AdapterFor Female NPT
Connector
#23BMP-2 x ¾ S for ¾ NPTFemale Connection
�A� Adapter �B� Adapter �C� Adapter
All dimensions are for identification purposes only.
See page 18 for Capacity Test Information.
(C) #23BMP-1½ x ³⁄₈S for ³⁄₈NPT Female Connection
(C1) #23BMP-1½ x ½S for ½NPT Female Connection
Replacement Media
Item For Model 62-174R For Model 62-326
Filter Disc (0.3 micron) Order #FA-1½-30CSold 50/Pkg.
Order #FA-2-30CSold 50/Pkg.
SS Perforated Disc withBuna Gasket
Order #FAD-1½-01-USold in single units
Order #FAD-2-01-USold in single units
17
Model B45 MP 1" through 2½" Check Valve
Model B45 MP 3" Check Valve
Appendix
Pressure Drop CurvesAll curves are tested pressure drop curves, not certified, and should be applied for guidelinepurposes only. Performance curves are based on tests using 68°F (20°C) water. See page 13 forCheck Valve information.
18
Disposable Air Filter Media Capacity Test
Air Blow Filter Capacity Test
0
10
20
30
40
50
60
500 1000 1500 2000 2500 3000 35000
70A
ir S
uppl
y P
ress
ure
(P
SI)
62-1
74R
62-32
6
Air Volume in Standard Cubic Feet Per hour
4000 4500
All curves are tested pressure drop curves, not certified, and should be applied for guidelinepurposes only. Performance curves are based on tests using 68°F (20°C) water. See page 14 forCheck Valve information.
Model 45BYMP Ball Check Valve
0 50 100 150 200 250 300 350
0
2
4
6
8
10
12
14
400 450GPM
H (FT)H (m)
Q (m /hr)3
0
0.6
1.2
1.8
2.4
3
3.7
4.3
0 11 23 34 45 57 68 80 91 102
Pre
ssur
e D
rop
Flow
Appendix
Capacity Test & Pressure Drop Curves
See page 15 for Filter Media information.
Following are all registered trademarksof Tri-Clover Inc.
Tri-Clover Tri-BlenderTri-Clamp Super-SpeedTri-Weld MainstreamTri-Taper Streamline
AL-6XN is a registered trademark ofAllegheny Ludlum Corporation.
Pumps
C Series Centrifugal—Catalog TF5 sizes in capabilities to 1150 GPM(261m3/hr). 1¹⁄₂"-6" (38.1-152.4mm)inlet.
CL Series Centrifugal—Catalog CL11 sizes in capacities to 2000 GPM(454 m3/hr). 2¹⁄₂"-4" (63.5-101.6mm) inlet.
CL WFI (Water For Injection/Pharmaceuticals)—Bulletin CLWFI
4 sizes in capacities to 700 GPM(159m3/hr). 1¹⁄₂"-4" (38.1-101.6mm)inlet.
EH Series Centrifugal (Low Shear)—Bulletin EH
3 sizes in capacities to 1000 GPM(227 m3/hr). 3"-6" (76.2- 152.4mm)inlet.
PR Series Positive Rotary—Catalog PR6 sizes to 300 GPM. (68 m3/hr). 1"-6"(25.4-152.4mm) inlet and outlet.
T Series Positive Rotary—Bulletin TS(TSR Standard Rotor Design)12 sizes to 500 GPM/290 PSI.(113m3/hr/20 BAR) 1"-6" (25.4-152.4mm) inlet and outlet. (TSKUltra CIP) 5 sizes to 250 GPM/145psi (56.5m3/hr/10 bar) 1"-3" (25.4-76.2mm) inlet and outlet.
Diaphragm Pumps—Bulletin AOD5 sizes to 200 GPM/100 psi.(45m3hr/7 bar) ¹⁄₄"-4" (6.4-101.6mm)inlet and outlet.
Fittings
Sanitary Fittings—Catalog FTGSTri-Clamp®, Tri-Weld ®, and BevelSeat for the food, beverage, anddairy industry—1"-4" (25.4-101.6mm)
Bio-Pharm Fittings—Catalog PHARMTri-Clamp® and Tri-Weld ® mechani-cal and electropolished fittings forthe bioprocessing industry—½"-4"(12.7-101.6mm)
AL-6XN®—Bulletin AL6-FTGSanitary 1"-3" (25.4-76.2mm)Tube OD.
AutomatedSystems
Tri-Blender®—Bulletin TBBlends up to 350 lb./min. (159 kg)dry powder with up to 150 GPM.(34 m3/hr).
CIP Systems—Bulletin CIPFour standard models. Variations forhot sanitizing service.
Filters/Strainers—Bulletin BFSBuilt to sanitary standards. Lowpressure drop and extended service.
Bio-Pharm Systems—Bulletin BPA range of products for Bio-Pharmapplications.
Valves
Mix-Proof—Catalog MPVMultiple actuator stem designs withfull stroke capability.
Air-Actuated—Catalog AVMany styles for automatic flow, andfull CIP capability. Also availablewith optional control top housing.1"-4" (25.4-101.6mm) sizes.
Fractional Sizes—Bulletin FVType 316L SS. ¹⁄₂" & ³⁄₄" (12.7 and19.0mm) sizes.
Ball—Bulletin BV3-piece body with PTFE seats andpacking. 1"-4" (25.4-101.6mm)sizes.
Butterfly—Bulletin BFVAluminum body. Adaptable to avariety of end connections. 1"- 4"(25.4-101.6mm) sizes.
SS Butterfly—Bulletin B51Stainless steel body. Tri-Clamp® endconnections. Variety of seatmaterials. 1¹⁄₂"-6" (38.1-152.4mm)sizes.
Saunders Diaphragm—Catalog SSVFor sterile applications. ¹⁄₄"-4" (6.4-101.6mm) sizes.
Miscellaneous Valves—Catalog MVCompressor, Plug, Relief, andCheck Valves. 1"-4" (25.4-101.6mm) Tube OD.