trico product catalog 2005

T h e C l e a n , S a f e A p p r o a c h

t o Lu b r i c a t i o n M a n a g e m e n t

T h e C l e a n , S a f e A p p r o a c h

t o Lu b r i c a t i o n M a n a g e m e n t

Table of ContentsTable of Contents22

TRICO MFG. CORP. 1235 Hickory Street, Pewaukee, WI 53072

Tel. 1-800-558-7008 or 262-691-9471 FAX 262-691-2576www.tricomfg.com

©Copyright Trico Mfg. Corp. 2004

Cat. No. 60006 10/04

Introduction to Trico. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3Introduction to Constant Level Lubrication . . . . . . . . . . . . . . 4

Opto-Matic® Constant Level Oilers. . . . . . . . . . . . . . . . . 5-6LCL Oilers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7Opto-Matic® Closed System Oilers . . . . . . . . . . . . . . . . . . 8Watchdog® Oilers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Introduction to Pressure Differential Products . . . . . . . . . . 10Breather Tubes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10Equalizer™ Expansion Chambers . . . . . . . . . . . . . . . . . . . 11Selection of an Expansion Chamber . . . . . . . . . . . . . . . . . 12

Introduction to Visual Inspection Units . . . . . . . . . . . . . . . . 13Sump Bottle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13Liquid Level Gauges . . . . . . . . . . . . . . . . . . . . . . . . . . 14-15

Introdution to Oil Sampling/Analysis . . . . . . . . . . . . . . . . . . 16Oil Sampling Ports . . . . . . . . . . . . . . . . . . . . . . . . . . . 17-18Pitot Tube Sampling Ports . . . . . . . . . . . . . . . . . . . . . . . . 19Liquid Level Gauge Sample Ports . . . . . . . . . . . . . . . . . . . 20Spacer Flange Sampling Ports. . . . . . . . . . . . . . . . . . . . . . 21Catch Pipe Sampling Port . . . . . . . . . . . . . . . . . . . . . . . . 22Vacuum Pump and Sampling Accessories . . . . . . . . . . . . . 23Breather Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24-25

Introduction to Moisture Detection & Removal Systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

Hydrolert® Products . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27Watchdog® Desiccant Breathers. . . . . . . . . . . . . . . . . . 28-29Watchdog® Oil Dryers . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

Introduction to Fluid Handling Systems . . . . . . . . . . . . . . . . 31Oil Safe® Products . . . . . . . . . . . . . . . . . . . . . . . . . . . 32-33

Introduction to Gravity Feed Oilers. . . . . . . . . . . . . . . . . . . 34Gravity Feed Oilers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35Atlas Gravity Feed Oilers . . . . . . . . . . . . . . . . . . . . . . . . . 36PC Oil Cup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37Vari-Feed Wick Oilers . . . . . . . . . . . . . . . . . . . . . . . . . . . 38CA & CAE Chain Oilers. . . . . . . . . . . . . . . . . . . . . . . . . 39CB & CBE Chain Oilers . . . . . . . . . . . . . . . . . . . . . . . . . 40CC & CCE Chain Oilers . . . . . . . . . . . . . . . . . . . . . . . . 41D & DE Full Flow Dispensers . . . . . . . . . . . . . . . . . . . . . 42

E & EE Multiple Feed Oilers . . . . . . . . . . . . . . . . . . . . . . 43V Series Valves & VM Manifolds . . . . . . . . . . . . . . . . . . . 44ST Series Valves / S Series Applicators . . . . . . . . . . . . . . . 45Applicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46

Introduction to Grease Lubrication . . . . . . . . . . . . . . . . . . . 47Streamliner™ Grease Dispensers. . . . . . . . . . . . . . . . . . 48-49

Introduction to Central Lubrication . . . . . . . . . . . . . . . . . . 50Basic Types of Systems . . . . . . . . . . . . . . . . . . . . . . . . . . . 51Positive Displacement Injectors . . . . . . . . . . . . . . . . . . . . 52Pumps for PDI Systems . . . . . . . . . . . . . . . . . . . . . . . . . . 53PM-10 & 20 Series Manual Cyclic Pumps . . . . . . . . . . . . 54PE-10 & 12 Series Automatic Cyclic Pumps . . . . . . . . . . . 55PE-20, 22 & 24 Series Automatic Cyclic Pumps . . . . . . . . 56PE-30 & PE-32 Series Automatic Cyclic Pumps . . . . . . . . 57PE-40 & PE-50 Series Continuous System Pumps . . . . . . 58Meter & Control Units . . . . . . . . . . . . . . . . . . . . . . . . . . 59Fittings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60-61Fittings & Hoses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63Technical Information . . . . . . . . . . . . . . . . . . . . . . . . . . . 64Using the System Design Worksheet . . . . . . . . . . . . . . 65-66System Design Worksheet . . . . . . . . . . . . . . . . . . . . . . . . 67Product Selection Charts . . . . . . . . . . . . . . . . . . . . . . . . . 68Distribution Network Design . . . . . . . . . . . . . . . . . . . 69-70

Introduction to Minimum Quantity Lubrication . . . . . . . . . . . 71MD-1200 Micro-Drop® . . . . . . . . . . . . . . . . . . . . . . . 72-73

Introduction to Spray Cooling . . . . . . . . . . . . . . . . . . . . . . 74DL & DL Magnum . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75Li’l Mister® Systems. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76“SST” Spray Coolant Systems . . . . . . . . . . . . . . . . . . . . . 77Spraymaster® . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78Spraymaster® II . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79Type “B” Spray Coolant Systems . . . . . . . . . . . . . . . . . . . 80Mistmatic® Coolant Delivery Systems. . . . . . . . . . . . . . . . 81Coolant Delivery Systems . . . . . . . . . . . . . . . . . . . . . . 82-83

Introduction to Lubricants & Coolants . . . . . . . . . . . . . . . . 84Tri-Cool® Fluids . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85-86

◆ In the selection charts on the following pages, units with inch threads areindicated with red model numbers, and metric units with green model numbers.

TRICO CUSTOMER SATISFACTION GUARANTEETrico is proud of its commitment to quality. All Trico products are guaranteed against defects in workmanship and materials for as long as you own them. Under this guarantee, free repair or replacement will be made to your satisfaction. Normal wear and tear or misuse is not

covered under this warranty. For prompt service, contact Trico Customer Service at 800-558-7008 or your local authorized distributor.

Introduction to TricoIntroduction to Trico 33Machines break down and wear out, often before their time. It’s just another cost of productionfor many manufacturers. But when they do, the real cost comes in the way of countless hours ofdowntime, ongoing repairs, decreased production and often weeks and weeks of lost revenue. It’sfor these reasons and many more that we at Trico Mfg. Corp. - a company that has been aroundfor 85 plus years - made it our mission to continuously find new ways to make maintenance a wayof life, not loss, for our customers.

We are embarking on a new ideology in the manufacturing world. It’s called totallubrication management and it’s a more proactive way of approachingmaintenance. Trico is on the forefront of this new approach. In fact, we arecontinually developing new and unique products centered on theidea of helping our customers get the most out of their machineswhile eliminating the crippling effects of downtime.

Relentless in our pursuit to bring full service maintenance solutionsto our customers, Trico acquired Toronto-based Schematic ApproachInc. (SAI), in 2004. Another pioneer in this proactive approach tomaintenance, SAI has quickly built a reputation as a progressivesolutions provider, offering customers the training, auditing, monitoringand consulting services that have become necessary in building andmaintaining a successful maintenance program. The company hascounseled many of the top manufacturing operations throughout NorthAmerica and has clearly demonstrated the value of designing and executingprograms that dramatically cut costs and improve the bottom line.

With SAI by our side, Trico has created the only one-stop resource for total lubricationmanagement, offering the broadest line of industrial lubrication products and services available.Our reputation for quality craftsmanship and outstanding customer service only supports Trico’spromise to continue providing new, forward-thinking solutions to our customers.

“Worldwide leadership in lubrication management”

AUDITING

CONSULTINGMONITORING

PARTSSOLUTIONS

TRAINING

Introduction to ConstantLevel Lubrication

Introduction to ConstantLevel Lubrication44

Constant level oilers are designed to maintain a predetermined oillevel in a sump, which is necessary for proper lubrication. If the oillevel were to drop below this point, the depleted oil wouldautomatically be replenished by the lubricator, returning it to itsoriginal level. With the use of constant level oilers, maintenanceefficiencies can be increased, while minimizing maintenance costs,and the loss of production time.

The majority of constant level oilers available are adjustable,allowing for use in many applications. However, there are oilersavailable that do not allow for fluid level adjustability, eliminatingpotential installation errors. Typically, constant level oilers aremounted on the side of the equipment facing the direction of shaftrotation. Some oilers allow for bottom mounting, on the oilsump, which prevents the oiler from misfeeding duringapplications that contain currents and turbulence formed byslinger rings, discs, and high rotating speeds.

In most cases constant level oilers are vented to the outsideatmosphere to work properly. Since these oilers are vented to theatmosphere, especially in harsh, dirty environments, contaminantsare allowed to enter the lubricating oil. These contaminants are in the forms of moisture and/or particulate which are extremelydamaging to oil and equipment life.

In order to combat the potential for oil contamination, the closed system oiler was developed. These oilers are effective inminimizing and eliminating the ingression of contaminants intothe oil sump, especially in dirty environments. Some closedsystem oilers contain a pressure balancing line, which is connectedfrom the headspace of the oil sump to an air chamber built into the surge body of the oiler. This air chamber is sealed fromthe outside atmosphere in order to prevent the ingression ofcontaminants. Additional types of closed system oilers are availablethat mount directly on the centerline of the oil level to bemaintained. The exchange of air between the oil sump and the oiler is at the the oilers base, which is mounted directly to the oil sump.

Several different types of constant level oilers are available to meetspecific application needs, whether it is vented or non-vented,adjustable or nonadjustable they are an easy and effective methodof maintaining proper oil level in equipment.

VENTED CONSTANT LEVEL OILER WITH BOTTOM CONNECTION

VENTED CONSTANT LEVEL OILER WITH SIDE CONNECTION

CLOSED SYSTEM OILER WITH PRESSURE BALANCING LINE

CLOSED SYSTEM OILER MOUNTED ONCENTER LINE OF DESIRED OIL LEVEL

Direction of shaft rotation




Opto-Matic®

Constant Level OilersOpto-Matic®

Constant Level Oilers 55APPLICATIONS:Opto-Matic oilers provide an inexpensive method to automatically maintain a constant level of oil in apump bearing housing, gear box, or other oil sump applications. Throughout processing industries, theOpto-Matic oiler is the industry standard. Different reservoir capacities allow use in many applications.

Stainless steel models provide long life in corrosive environments in the chemical, pulp and paper, andmining industries.

30003

30012

30013

30016

30020

-

30223

30225

30230

DescriptionModel No.Standard

Model No.Stainless Steel

Wire Guards

2-1/2 oz. Guard

4 oz. Guard

8 oz. Guard

16 oz. Guard

Wire guards are ordered separately and are customer installed.

30002

30003

30005

30010

11/32

9/32

9/32

9/32

3-15/16

5

5-15/16

6-13/16

4-1/4

5-3/4

6-11/16

7-9/16

2-1/2

2-11/16

3-3/16

4-1/8

B Min. B Max. C Min. C Max.Model No. A

SELECTION CHART- STANDARD

9/16

1

1

1

2-1/2 oz.

4 oz.

8 oz.

16 oz.

1/4

1/4

1/4

1/4

Connection

30213

30215

30220

Dimensions (in.)

9/32

9/32

9/32

4-15/16

5-7/8

6-3/4

5-11/16

6-5/8

7-1/2

2-11/16

3-3/16

4-1/8

B Min. B Max. C Min. C Max.

Model No. With Side &

Bottom ConnectCapacity

A

SELECTION CHART - STAINLESS STEEL

1

1

1

4 oz.

8 oz.

16 oz.

1/4

1/4

1/4

Connection(NPT)*

Capacity (NPT)*Dimensions (in.)

* Metric thread sizes available. Add “-M” to part number for 1/4 BSPT connection port.


*

B

A

87/

*

B

A

43/C*

B

A

87/

Connection Side and BottomStainless Steel

No. 30002 Standard No. 30003, 30005, and30010 Standard

A

C*

B

3/4

7/8

A

B

A

B

C*

7/8

Max. Operating Temp.ReservoirCastingFinishInternal PartsO-Ring

Standard

ZincZinc/Chromate Plate

304 Stainless Steel

304 StainlessPassivated

SPECIFICATIONS

250ºF ContinuousOne-Piece Glass Bottle

Zinc Plated SteelViton®

Viton® is a registered trademark of Du Pont Dow Elastomers.

FEATURES:• One piece glass reservoir ensures proper constant

level function. Compared to competitivemodels, there is no possibility of air leakage thatwould cause overfilling of the bearing housing.

• Adjustable level setting allows use inmany applications.

• Multiple air vent slots provide for properfunctioning at all times.

• Large surge chamber helps prevent overflow ofoil during machine start-up or shut-down.

• Side and bottom connections forsimplified installation.

C*

* “C” dimensions represent oil level range* “C” dimensions represent oil level range

Opto-Matic®

Constant Level OilersOpto-Matic®

Constant Level Oilers

C

B

A

87/

C*

B

A

7/8

LS

EH EHB

A

BC*

A

B

C*

A

B

C*

C*

A

B

3/4 3/4

3/43/4

1 3/32 1 3/32

2 11/322 11/32

E EB

66




3002430028

300623006430068

Dimensions (in.)

300523005430058

Model No.

1/41/41/4

3-7/84-9/165-11/16

4-3/85-1/166-3/16

1-15/162-5/162-5/8

B Min. B Max. C Min. C Max.E EBCapacity

Model No.A

SELECTION CHART - E, EB

3/43/43/4

2 oz.4 oz.8 oz.

1/41/41/4

(NPT)*Connection

300823008430088

Dimensions (in.)

300723007430078

1/41/41/4

55-11/166-13/16

5-1/26-3/167-5/16

1-15/162-5/162-5/8

B Min. B Max. C Min. C Max.EH EHBCapacity

Model No.A

SELECTION CHART - EH, EHB (large surge chamber)

3/43/43/4

2 oz.4 oz.8 oz.

1/41/41/4

(NPT)*Connection

Dimensions (in.)

9/329/32

5-7/166-9/16

6-3/167-5/16

2-5/162-5/8

B Min. B Max. C Min. C Max.Capacity

A

SELECTION CHART - LS (large surge chamber)

11

4 oz.8 oz.

1/41/4

(NPT)*Connection

APPLICATIONS:Opto-Matic oilers provide a constant level of oil in a pump bearinghousing, gear box, or other oil sump applications. Different reservoircapacities allow use in many applications.

“LS”, “EH”, and “EHB” models have a large surge chamber to minimizepotential of leakage during oil surge conditions.

FEATURES:

• High strength, transparent, ribbed plastic reservoir provideslong life and impact resistance.

• Adjustable level setting allows use in many applications.

• Multiple air vent slots provide for proper functioning at all times.

• Large surge chamber (LS, EH, and EHB models) preventsoverflow of oil during machine start-up or shut-down.

• Side and bottom connections for simplified installation.

165ºF ContinuousButyrate PlasticZinc Die CastBright Zinc PlatedZinc Plated Steel

SPECIFICATIONS

30084

Max. Operating Temp.ReservoirCastingFinishInternal Parts

30024 30064

* “C” dimensionsrepresent oillevel range

LCL OilersLCL Oilers 77

32511325173253332581

-

3241032416324323248032481

3-1/83-5/84-7/165-11/165-11/16

BGlassMounting BoltCapacity

Dimensions (in.)Model No.A

SELECTION CHART

4-1/45-5/166-3/89-1/214-1/2

10 oz.1 pt.1 qt.

2.5 qt.1 gal.

1/4-201/4-201/4-201/4-201/4-20

Acrylic

APPLICATIONS:LCL large capacity oilers provide a constant level of oil in a pump bearing housing, gear box, or other oil sump applications.They operate on the same principle as the Opto-Matic® oilers and are used in applications requiring a large reservoir capacity.

In isolated areas where refilling is a problem, LCL oilers can save time and maintenance costs.

32432

FEATURES:• Large capacity glass or acrylic reservoir to 2-1/2 quarts, acrylic reservoir

available in 1 gallon.

• Factory set oil level at center line of side outlet allows easy installation.

• Specially designed feed tube to ensure reliable lubricant delivery.

• Large surge chamber prevents overflow of oil during machine start-upor shut-down.

• Side connection of 1/2 NPT makes for durable and rigid installation.Mounting bolt (1/4-20) provided for attachment to support bracket.

Max. Operating Temp.

Reservoir

GasketMaterialsCastingFinish

Glass 250ºF ContinuousAcrylic 165ºF Continuous

Heavy Wall Heat Resistant GlassHeavy Wall Acrylic Plastic

Buna-NBrassAluminum Sand CastingLacquered Satin Finish

SPECIFICATIONS A

B

2 5/16

1/2

3 5/8

3/4

1/2 NPT

Helpful Tip:The LCL oiler is a vented oiler that mountson the centerline of the desired oil level.

Helpful Tip:

Opto-Matic®

Closed System OilersOpto-Matic®

Closed System Oilers88

DescriptionModel No.

300133001630020

Wire Guards

4 oz. Guard8 oz. Guard16 oz. Guard

Wire guards are ordered separately and are customer installed.

APPLICATIONS:The Opto-Matic closed system oiler is designedfor all types of equipment where a constantlevel in an oil sump must be maintained. Theclosed system design prevents contaminationand spillage. The adjustable collar allows the oillevel to be externally adjusted to the desiredlevel. A 1/8 NPT port is provided for a ventline back to the housing to allow pressurebalancing between the oiler and the housing.

FEATURES:• One piece glass reservoir ensures proper constant level

function. Compared to competitive models, there isno possibility of air leakage that would causeoverfilling of the housing.

• Adjustable level setting allows use in many applications.

• Bottom of adjusting collar indicates actual oil levelsetting for easy set-up and maintenance.

• Side and bottom connections for simplified installation.

• 2˝ sight gauge for easy viewing of oil level.

SPECIFICATIONSMax. Operating Temp.ReservoirUpper CastingLower BodyAdjusting CollarO-Ring

250ºF ContinuousOne-Piece Glass BottleZincZincZincViton®

*Metric thread sizes available. Add “-m” to part numberfor 1/4 BSPT connection port

302033020530210

1/41/41/4

7-1/168

8-7/8

7-13/168-3/49-5/8

2-11/163-3/164-1/8

B Min. B Max. NPT*Model No.

A

SELECTION CHART

4 oz.8 oz.16 oz.

Capacity Dimensions (in.)

.75 Range of

Adjustment

oil levelsetting

OPTO-MATIC CLOSED SYSTEM OILER WITH PRESSURE BALANCING LINE

0.090" min0.840" max

B

A

Watchdog® OilersWatchdog® Oilers 99

Stainless SteelGlassGlass

325ºF/160ºCViton®

Stainless Steel Body

31802

31804

31818318203182131822318233182431825318263182731828

31829

3193031931319323193331934319353193631937

3-9/32

3-9/32

4-1/83-1/43-1/44-1/83-1/43-3/83-3/84-1/83-3/84-1/8

3-1/4

3-7/163-7/163-7/163-7/164-1/24-1/23-7/163-7/16

B CModel No.

AConnection

2 oz.

4 oz.

4 oz.4 oz.4 oz.4 oz.4 oz.4 oz.4 oz.4 oz.4 oz.4 oz.

4 oz.

2 oz.4 oz.2 oz.4 oz.2 oz.4 oz.2 oz.4 oz.

1/2 NPT3/4 NPT1 NPT

3/4 BSPT1 BSPT

3/4 NPT1 NPT

3/4 BSPT1 BSPT

1/2 NPT

Style Dimensions (in.)

1 NPT

3/4 NPT

1 NPT

1 NPT

3/4 BSPT

1 BSPT

ThermoplasticBody, Reservoirand Viewport

Stainless SteelBody, Glass

Reservoir andViewport

Aluminum Body,Glass Reservoirand Viewport

Aluminum Body,ThermoplasticReservoir and

Viewport

Capacity WireGuard

No

No

NoNoNoNoNoYesYesYesYesYes

No

NoNoNoNoNoNoNoNo

4-1/32

5-3/4

6-1/46-1/46-1/46-1/46-1/46-1/26-1/26-1/26-1/26-1/2

6-1/4

4-1/325-3/44-1/325-3/44-1/325-3/44-1/325-3/4

1

1

1/23/41

3/41

3/41

3/41

1/2

1

3/43/411

3/43/411

31802

BodyReservoirViewportMax. Operating Temp.O-Ring

SPECIFICATIONS

Cast AluminumGlass or PolysulfoneGlass or Polysulfone


Aluminum Body

PolysulfonePolysulfonePolysulfone


Thermoplastic Body

The WATCHDOG closed systemoiler is designed for bearinghousings, gear boxes, and other oilsump applications. It is ideal foruse in the chemical processing,power generation, pulp and paper,and utility industries. The viewportprovides visual indication oflubricant level and condition.Mounted on the centerline of thedesired oil level, these constantlevel oilers do not require anyadjustment or level setting.

FEATURES:• Closed system design prevents

contamination and spillage.

• No vent line to pump bearinghousing required, simplifyinginstallation.

• 2 oz. or 4 oz. reservoirs provide oil make-up.

• Mounts on centerline of desired oil level, and does not requireadjustment or level setting.

• Integral viewport eliminates needfor additional component.

3193331825 31829

WATCHDOG Oiler mounted oncenterline of desired oil level.

SELECTION CHART

2-1/4

A

B

C

Introduction to PressureDifferential Products

Introduction to PressureDifferential Products1010

Frequent operation start-ups and environmental temperature swings in mechanical equipment can cause the air pressure inside oilsumps to increase and decrease, causing it to ‘breathe’”. This “breathing” air, in most cases, comes from the external atmospherethrough vents, fill ports, seals, and anywhere the oil sump is open to atmosphere. This can cause debris, dirt, and moisture to enter theequipment attacking and breaking down the equipments vital lubricant and ultimately reducing the life of bearings and gears. TheEQUALIZER® Expansion Chamber reduces or eliminates this “breathing” action by replacing the vent, providing an extra 25 cubicinches of airspace, by a rolling diaphragm. This provides the extra air volume necessary to overcome expansion and retracting inside thehousing, eliminating the need for equipment to “breathe” contaminated and damaging external air. But, just how much of this“breathing” occurs? Below is a typical installation of a common piece of equipment and the effects of temperature fluctuations.

Using the following volume and temperature parameters, these values can be inputed into theplug-in worksheet supplied at www.tricomfg.com/worksheet-exp_chamber.asp, or follow theTotal Air Expansion worksheet supplied on page 12. As shown here, a relatively commonoccurrence can produce up to almost 18 in3 of air expansion which escapes through the seals orvents. Conversely, that 18 in3 needs to return to the housing when temperatures cool. That iswhen the damage is done.

Closing your system is the most effective way to eliminate harmful contaminates from enteringyour system and the EQUALIZER® Expansion Chamber supplies the added air volume toeliminate the need for breathing due to temperature fluctuations. This is especially importantwhen used in harsh orcontaminated environments andwhen frequent start-up and shut-downs are necessary.

3211060128

Amount of Oil in Housing (oz.)

Temp. Range of Housing (F)

Total Volume in Housing (oz.)

Total Expansion: 17.81 cubic inches

HighLow


30014 Type “C”

30015 Type “E”

1/8 NPT ThreadWick Filter

1/8 NPT ThreadDust Cap

Breather tubes are accessories used in conjunction withvented Opto-Matic Oilers to help eliminate vacuumscreated by abnormally tight bearings or pressures createdby high speed bearings. The breather tube helps maintaina constant atmospheric pressure in the bearing housing.

Breather TubesBreather tubes are available for customer installed vent ports in bearing housing or piping lines.

Helpful Tip:Breather tubes are idealfor use in environmentsthat contain minimalcontaminants. Ifcontamination is aconcern the WATCHDOGDesiccant Breathers arean excellent choice forremoving contaminantsas well as allowing theequipment to breathe.

Helpful Tip:

30014 30015

1111Equalizer™

Expansion ChambersEqualizer™

Expansion Chambers

APPLICATIONS:

SPECIFICATIONSBodyDiaphragmMaximum Operating Temperature

Stainless SteelViton®

350ºF

31813

31811

Equalizer Expansion Chambers are designed to prevent pressure increase inclosed systems. A rolling diaphragm provides a variable volume, that whenproperly sized, maintains oil housing pressure at or near zero PSI. Thereduced pressure will extend seal life and help prevent leakage. Expansionchambers also protect the integrity of closed systems by preventing theexchange of air from the chamber to the surrounding atmosphere.A choice of thread sizes offers flexibility to the user.

Helpful Tip:

Prevention of oilcontamination anddegradation is veryoften the most reliablemeans of preventingequipment failures. Byminimizing the waysthat contamination canenter equipment,lubricant cleanlinesslevels are increased.Products such as theWATCHDOG oilers,Opto-Matic closedsystem oilers,Equalizer expansionchambers, andWATCHDOG breathers,can help lubricantsremain cleaner longer.

Helpful Tip:

Expansion chamber at normal temperature.

Expansion chamber at higher temperature.

Expansion Chamber

Diaphragm

ExpansionChamber

Diaphragm

318153181631817

Model No.

SELECTION CHART

3/81/23/4

25 cu. in.25 cu. in.25 cu. in.

Connection(NPT)

Capacity*

7/81

1-1/4

Dim.(A) (in.)

* For application assistance on calculating required capacities, please contact Trico or visit our web site for an online worksheet atwww.tricomfg.com/worksheet-exp_chamber.asp

FEATURES:• Made from corrosion resistant stainless steel.

• Controlled housing pressure extends seal life.

• Prevents contamination ingression to help lubricants staycleaner for longer life and improved performance.

• Full 25 cubic inch air expansion capability

• Maintenance free operation

3-3/4”

4-1/16”

A

1212Selection of an

Expansion ChamberSelection of an

Expansion Chamber

DETERMINE TOTAL AIR EXPANSIONTo determine the correct expansion chamber size required for your application, obtain thefollowing data and follow the steps listed below. Please visit our website for assistance oncalculating required capacities at www.tricomfg.com/worksheet-exp_chamber.asp

1. The amount of oil, in ounces, normally in the bearing housing. _________ oz.

2. Multiply above answer by 1.804 to obtain _________in3 (oil volume). Place this value into the table below STEPS A & B in3 (oil volume).

3. The temperature range of the bearing housing. High _________°F Low _________°F.Place High & Low temperature in STEP C. Subtract the low from the high and placein STEP A (high-low temp).

4. Complete STEP A. Multiply oil volume by temperature difference and coefficient of expansion. (NOTE: .0004 is coefficient of expansion for most turbine oils). Place answer in STEP D, in3 (oil expansion).

5. The total volume of the bearing housing. Many customers may not know this. Contact your pump manufacturer for this information. _________ oz. (total volume).

6. Multiply answer from above by 1.804 to obtain _________ in3 (sump volume). Place this value into the table STEP B in3 (sump volume).

7. Complete STEP B, subtract in3 (oil volume) from in3 (sump volume) to get in3

(air volume) and place answer in both places in STEP C, in3 (air volume).

8. Follow instructions in STEP C to get in3 (air expansion). Place answer into STEP Din3 (air expansion).

9. Complete STEP D by adding to get in3 (total expansion), with this information you can select the correct size expansion chamber for your application.

Amount of Oil in Housing (oz.)1

Temp. Range of Housing (°F)

Total Volume in Housing (oz.)

High

Low

BEFORE STARTING, OBTAINTHE FOLLOWING DATA:

2

3

1313Introduction to

Visual Inspection UnitsIntroduction to

Visual Inspection Units

Monitoring proper levels and the condition of operating fluids is essential in many industrialapplications. Although important, these elements are often overlooked and cause detrimentalaffects to the life of the fluid as well as, the equipment it supplies. Fortunately, Trico offersproducts such as, viewports and liquid level gauges, which provide an easy and accurate methodfor visually inspecting many types of industrial fluids. In addition, Trico also offers sump bottlesas a further means for visual inspection. These bottles function as a collection chamber for bothsediments and free water that can invade oil sump applications. Using these products inconjunction or separately, can have positive influences on fluid and equipment costs. By taking aproactive approach and installing visual inspection products, the life of your industrial equipmentcan be significantly prolonged.

Closed system liquid level gauge with pressure balancing line connected to a gear box housing.

B

15/16

3131131321313413134231382

Model No. Capacity Connection(NPT)

Dimensions (in.)BA

SELECTION CHART

1-5/81-15/162-5/162-5/162-5/8

1-5/82-1/162-7/82-7/8

4

1 oz.2 oz.4 oz.4 oz.8 oz.

1/81/81/81/41/4

SPECIFICATIONSMax. Operating Temp.ReservoirGasketMaterialsFinish

165ºF ContinuousButyrate PlasticBuna-NSteel and BrassBright Zinc Plated

APPLICATIONS:Trico sump bottles are used as collection chambers on bearinghousings and other oil sump applications. They collect water andcontaminants, and have a drain plug for easy inspection andremoval of fluids.

FEATURES:• Easy open/close drain valve.

• Plastic reservoirs have reinforcing ribs for long life andimpact resistance.

• Copper brazing of all steel connections provides long life andleak proof design.

• Zinc plating resists corrosion. A

Helpful Tip:Oil should be clear andbright in sump bottles. If water or sediment isobserved, removeimmediately and investigatesource. Up to 70% ofequipment fails prematurelydue to contamination in lubricants.

Helpful Tip:

SUMP BOTTLES

1414 Liquid Level GaugesLiquid Level Gauges

BL BE BTBC BF

BDBG

13217R

SPECIFICATIONSConstructionSightSealsMax. Operating Temp.

BrassGlassViton®

250ºF

BL-0138-2BL-0138-3BL-0178-2BL-0178-3BL-0225-2BL-0225-3BL-0275-2BL-0275-3BL-0325-2BL-0325-3BL-0525-2BL-0525-3BL-0725-2BL-0725-3BL-0550-3BL-0750-3

1-3/41-3/41-3/41-3/41-3/41-3/41-3/41-3/41-3/41-3/41-3/41-3/41-3/41-3/42-1/22-1/2

1-3/81-3/81-7/81-7/82-1/42-1/42-3/42-3/43-1/43-1/45-1/45-1/47-1/47-1/45-1/27-1/2

2-15/162-15/163-7/163-7/163-13/163-13/164-5/164-5/164-13/164-13/166-13/166-13/168-13/168-13/167-1/49-1/4

1/43/81/43/81/43/81/43/81/43/81/43/81/43/83/83/8

B C D EModel No.

Dimensions (in.)A

SELECTION CHART - LONG ELBOW

1/21/21/21/21/21/21/21/21/21/21/21/21/21/25/85/8

Square

11/1611/1611/1611/1611/1611/1611/1611/1611/1611/1611/1611/1611/1611/167/87/8

VENT

A - NPT

BASE SQ.

B C

D

EGLASS DIAM.

CLOSED SYSTEM TOP CAPSFor closed system applications, all liquid level gaugescan be ordered with a top cap that has a 1/8 NPTport for installing a pressure balancing line to thereservoir. Contamination from water and particulateis reduced and equipment life is prolonged.

To make this conversion, use the selection chartbelow to order the appropriate size cap. To order anew liquid level gauge with this cap installed, addthe suffix “C” to the part number.

13217R13218R

Model No.

1/2˝ Glass Diameter5/8˝ Glass Diameter

Gauge Size

1/8 NPT1/8 NPT

Connection Thread Size

TOP CAP SELECTION CHARTDescription

Closed SystemConversion Cap

Air

Oil

HOW TO ORDER: 1. Choose the type of gauge mounting and configuration:

BG - Straight Male Thread BE - Short Male ElbowBF - Female Elbow BL - Long Male Elbow

2. Select model number using selection charts for correct size of gauge.3. Optional top caps are available. Add the following suffixes to the part number:

“C” - A cap with a 1/8 NPT port is provided for use in closed systemapplications. This is a non-vented design.“F” - A filter is installed in the vent cap to minimize contamination.“S” - A snap-lid filler cap is provided in place of the standard cap for easy filling.

FEATURES:• Guards are standard on all sights and may be rotated 360º for easy viewing.• Glass tubes offer high temperature use to 250ºF.• Wide range of mounting styles to fit most applications.• Optional top caps are available.

APPLICATIONS:Liquid level gauges provide easy viewing in many industrial applications. They areideal for bearings, transformers, and many other non-pressure applications.

LONG ELBOW

1515Liquid Level GaugesLiquid Level Gauges

1-3/81-3/81-7/81-7/82-1/42-1/42-3/42-3/43-1/43-1/44-1/44-1/45-1/45-1/47-1/47-1/45-1/25-1/25-1/27-1/27-1/2

3-1/83-1/83-5/83-5/8

44

4-1/24-1/2

55667799

7-1/47-1/47-3/89-1/49-1/4

1/43/81/43/81/43/81/43/81/43/81/43/81/43/81/43/81/43/81/21/43/8

B C D HEXModel No.

Dimensions (in.)A

SELECTION CHART - STRAIGHT

11/1611/1611/1611/1611/1611/1611/1611/1611/1611/1611/1611/1611/1611/1611/1611/1613/1613/167/8

13/1613/16

VENT

A - NPT

HEX FLATS

B C

DGLASS DIAM.

1/21/21/21/21/21/21/21/21/21/21/21/21/21/21/21/25/85/85/85/85/8

BG-0138-2BG-0138-3BG-0178-2BG-0178-3BG-0225-2BG-0225-3BG-0275-2BG-0275-3BG-0325-2BG-0325-3BG-0425-2BG-0425-3BG-0525-2BG-0525-3BG-0725-2BG-0725-3BG-0550-2BG-0550-3BG-0550-4BG-0750-2BG-0750-3

BE-0138-2BE-0138-3BE-0178-2BE-0178-3BE-0225-2BE-0225-3BE-0275-2BE-0275-3BE-0325-2BE-0325-3BE-0425-2BE-0425-3BE-0525-2BE-0525-3BE-0725-2BE-0725-3BE-0550-2BE-0550-3BE-0750-2BE-0750-3

1-1/41-1/41-1/41-1/41-1/41-1/41-1/41-1/41-1/41-1/41-1/41-1/41-1/41-1/41-1/41-1/41-3/41-3/41-3/41-3/4

1-3/81-3/81-7/81-7/82-1/42-1/42-3/42-3/43-1/43-1/44-1/44-1/45-1/45-1/47-1/47-1/45-1/25-1/27-1/27-1/2

2-15/162-15/163-7/163-7/163-13/163-13/164-5/164-5/164-13/164-13/165-13/165-13/166-13/166-13/168-13/168-13/167-1/47-1/49-1/49-1/4

1/43/81/43/81/43/81/43/81/43/81/43/81/43/81/43/81/43/81/43/8

B C D EModel No.

Dimensions (in.)A

SELECTION CHART - SHORT ELBOW

1/21/21/21/21/21/21/21/21/21/21/21/21/21/21/21/25/85/85/85/8

Square

11/1611/16

11/1611/1611/1611/1611/1611/1611/1611/1611/1611/1611/1611/1611/1611/167/87/87/87/8

VENT

VENT

A - NPT

A - NPT

BASE SQ.

BASE SQ.

B C

D

EGLASS DIAM.

EGLASS DIAM.

BF-0138-2BF-0138-3BF-0178-2BF-0178-3BF-0225-2BF-0225-3BF-0275-2BF-0275-3BF-0325-2BF-0325-3BF-0425-2BF-0425-3BF-0525-2BF-0525-3BF-0725-3BF-0550-3BF-0750-3

1/21/21/21/21/21/21/21/21/21/21/21/21/21/21/29/169/16

1-3/81-3/81-7/81-7/82-1/42-1/42-3/42-3/43-1/43-1/44-1/44-1/45-1/45-1/47-1/45-1/27-1/2

3-1/23-1/2

44

4-3/84-3/84-7/84-7/85-3/85-3/86-3/86-3/87-3/87-3/89-3/87-3/49-3/4

1/43/81/43/81/43/81/43/81/43/81/43/81/43/83/83/83/8

B C D EModel No.

Dimensions (in.)A

SELECTION CHART - FEMALE ELBOW

1/21/21/21/21/21/21/21/21/21/21/21/21/21/21/25/85/8

Square

7/87/87/87/87/87/87/87/87/87/87/87/87/87/87/811

D

CB

STRAIGHT

SHORT ELBOW

FEMALE ELBOW

1616 Introduction toOil Sampling/Analysis

Introduction toOil Sampling/Analysis

OIL SAMPLINGContamination of machinery lubricants is a major problem for many manufacturers. In fact, it has been stated that six to seven percentof the gross national product ($240 Billion) is required just to repair the damage caused by mechanical wear, which is caused bycontamination. However, when contamination is controlled, the life span of a machine’s vital components can be extended by as much

as 50 times. It’s for these reasons and many more that routine sampling is done.

The process of sampling is not only a vital and necessary function in identifying contaminants andcontamination levels, but also in understanding the current and future requirements of the equipmentand the quality of the lubricant in general. Regularly scheduled oil sampling and analysis programshave become an increasingly important tool for uncovering information necessary to extend the life ofyour equipment and oil change intervals and minimize maintenance costs associated with oil changeouts, labor, repairs and downtime.

Oil sampling technology today is making the process of collecting and analyzing samples much moreeffective and accurate. Trico offers the latest sampling supplies and accessories, including sample ports and collection devices, which aredesigned to extract system and component specific samples that are both representative andrepeatable from the best diagnostic locations in the most effective ways possible.

OIL ANALYSISUnderstanding the concept of oil sampling and the benefits involved is an important part of totallubrication management, however, reaping the benefits may require much more. Often, it requiresan intimate knowledge of the equipment, its internal design, the system design, the presentoperating and environmental conditions, the ability to regularly test samples in a safe andcontaminant-free environment and recommend and implement corrective actions as needed.

With these challenges in mind, Trico now offers services through its subsidiary SchematicApproach, Inc. (SAI), to inspect, analyze, and report on the operating conditions of entire manufacturing facilities’ machinery. SAI offerstechnical assistance to improve, repair and/or modify equipment and lubrication procedures to meet performance goals and offers on-siteor in-house training on best-in-practice ways of implementing lubricant screening regimens, equipment and plant assessments andlubrication management programs.

These services include:

• Auditing - The service includes mapping out lubrication requirements from incoming materials, to handling, to equipment,and then disposal.

• Consulting - Working with plant maintenance personnel to increase equipment reliability, improve lubrication practices, identifysample point locations and hardware requirements for effective diagnostic capabilities, assist, implement or evaluateequipment condition monitoring programs.

• Training - On-site or off-site training sessions targeting effective lubrication management principles, practices, and effectiveimplement of preventative maintenance, predictive maintenance, and proactive maintenance programs.

• Monitoring - Oil samples are taken and analyzed as a preventative maintenance tool and/or diagnostic means to determinecause of equipment failure. Oil is tested for a variety of critical factors including water, particulate, wear material, etc.

For further information on Schematic Approach, Inc. services, please contact:

Schematic Approach1149 Bellamy Road N #23Toronto, ON M1H 1H7 • CANADAPhone: 416-439-9425 • Fax: 416-439-9472Web: www.schematicapproach.com

PORT ADAPTER(36104, 36105, 35106)

PORT ADAPTER(36109, 36133)

DIM C

DIM C

DIM D

DIM D

Part Port ConnectionDim D MaterialNumber (Dim C)

36104 Barb for 1/4" OD Tube M16x2 Carbon Steel



36109* Barb for 1/4" OD Tube M16x2 Plated Steel

361331 * Barb for 1/4"OD Tube M16x2 Plated Steel

171717Oil Sampling PortsOil Sampling Ports

*Does not include gauge adapter, which can be used to attach pressure gaugesfor troubleshooting purposes when barb fitting is removed.

1 - Sample port adapter is used with any pitot tube or liquid level gauge purchased after Nov 1, 2004.

PORT ADAPTERS

17171717

Note: BSPT, BSPP, and O-ring boss threads are available upon request,please contact Trico’s Customer Service.

SAMPLE PORTSCarbon Steel Stainless Steel Port Connection Dim BP/N P/N (Dim A)

36100 36102 1/8" NPT M16x2

36101 36103 1/4" NPT M16x2

Maximum Working Pressure 9000 PSI (630 bar)Connect Under Pressure 5800 PSI (400 bar)Check Valve Ball Stainless SteelO-Ring Viton®Maximum Operating Temperature -4ºF to 392ºF

SPECIFICATIONS

Where and how oil samples are collected are two of the most important functions ofthe oil sampling process. Without a representative sample, further oil analysis effortswill be ineffective. That’s why Trico sample ports are designed to draw samples fromthe most representative areas from industrial equipment. Trico sample ports are alsodesigned to collect samples under the equipment’s typical operating condition -another important factor.

The collection process is a simple, fast and accurate way of sampling hydraulic,lubricating, and circulating systems. Access to systems is done through the use of amating sample port adapter. The sample port adapter screws onto the sample port.Oil samples can then be drawn from the system and placed into a clean samplingbottle for analysis.

To guard against contaminating the sample and for superior leak protection, Tricosampling ports all feature a check valve and a viton o-ring seal cap.

Trico sample ports are available in several types and sizes to match the varying requirements of manufacturers. Please see below for a completelisting and specifications. To complement the sample ports, there are a number of sample port adapters available, as well.

36109

36100

Helpful Tip:A sample port adapter mustbe used to draw a samplefrom Trico’s sample portsand pitot tubes.

Helpful Tip:

FEATURES:• Protective cap seals against dirt and moisture.

• Cap connected to sample port with a heavy brasschain to prevent loss.

• Sample directly from lubricating oil whileequipment is running.

• Minimizes introduction of contaminationinto system.

• Used in conjunction with proper accessoriessample ports are adaptable to pressure, static,and vacuum locations.

36104

SPECIFICATIONS

1818

Part Number Port Connection Material36128 M16 x 2 Male Carbon Steel

BULKHEAD SAMPLE PORT(for use with Micro-Bore Test Hose)

Part Number Port Connection Dim B Material(Dim A)

36107 1/4" NPT Female M16x2 Carbon Steel36108 1/2" NPT Female M16x2 Carbon Steel

GAUGE ADAPTERS

Gauge adapter can be used with sample ports to attach pressure gaugesfor troubleshooting purposes.

36107

Oil Sampling PortsOil Sampling Ports

DIM A(Connection to pressure

gauge)

DIM B

GAUGE ADAPTER(36107, 36108)

Helpful Tip:Always flush out the“dead zone” of themicro-bore test hoseusing a waste bottle beforetaking an oil sample.

Helpful Tip:

The micro-bore test hose is used for remote or difficult to reach oil samplinglocations, as well as locations that are too close to moving parts, making thetask too dangerous. The micro-bore test hose is designed to make oil samplingsafe and convenient. The hose assembly is available in various lengths for easeof installation. A bulkhead sample port is available for installations that requirepanel mounting.

Part Number Length36119 12"36120 24"36121 36"36122 48"36123 60"36124 72"36125 96"36126 120"36127 240"

MICRO-BORE TEST HOSE

Used for remote or difficult to reach sampling locations.

Maximum Working Pressure 9000PSI (630bar)Internal Dia .08" (2mm)Minimum Bending Radius .75"Thread connection M16x2

1919Pitot Tube Sample PortsPitot Tube Sample Ports

Trico’s Pitot Tube sampling ports are designed to provide a safe, simple and effective method of sampling fluids from sumps and non-flooded horizontal drain lines. They ensure oil samples are drawn from the most appropriate location of the sump reservoir, and that thesample is taken from the exact location inside the system each time, which is important for maintaining consistency in routine sampling.The thick wall tubing can be bended and directed to the ideal sampling location with the use of a swivel adapter.

FEATURES:• Pitot Tubes are equipped with sample ports (pg 17).

• Available in 12”, 18”, 24” and 72” lengths.

• Installs easily into drain, fill or sampling pipe ports.

• Swivel options available for bent tubes in confined locations.

Maximum Pressure 500 PSI (34.5 bar)Material Carbon Steel or Stainless SteelCheck Valve Ball Stainless SteelSeal VitonMaximum Operating Temperature -4ºF to 392ºF

SPECIFICATIONS

Fixed Adapter Swivel Adapter Tube Length Fitting36200 36213 12" 1/4" NPT Male36201 36214 18" 1/4" NPT Male36202 36215 24" 1/4" NPT Male36203 36216 72" 1/4" NPT Male

Fixed Adapter Swivel Adapter Tube Length Fitting36204 36217 12" 1/4" NPT Male36207 36220 18" 1/4" NPT Male36210 36223 24" 1/4" NPT Male

CARBON STEEL SAMPLE PORT AND TUBE

CARBON STEEL SAMPLE PORTAND STAINLESS STEEL TUBE

STAINLESS STEEL SAMPLE PORTAND CARBON STEEL TUBE

Fixed Adapter Swivel Adapter Tube Length Fitting36205 36218 12" 1/4" NPT Male36208 36221 18" 1/4" NPT Male36211 36224 24" 1/4" NPT Male

STAINLESS STEEL SAMPLE PORT AND TUBEFixed Adapter Swivel Adapter Tube Length Fitting

36206 36219 12" 1/4" NPT Male36209 36222 18" 1/4" NPT Male36212 36285 24" 1/4" NPT Male

Helpful Tip:A sample port adapter mustbe used to draw a samplefrom Trico’s Pitot Tubes. Pitottubes purchased after Nov. 1,2004 please use sample portadapter 36133 (pg17).

Helpful Tip:

2020 Liquid LevelGauge Sample Ports

Liquid LevelGauge Sample Ports

Liquid Level Gauge Sample Ports provide easy viewing offluid levels and oil condition in many industrial applications.They are ideal for bearing housings and other non-pressurizedapplications. Liquid Level Gauge Sample Ports include aPitot Tube (pg 19) for static sampling, which providesrepetitive, representative oil sampling.

FEATURES:

• Guards are standard on all sights and may be rotated 360ºfor easy viewing of fluid level and condition.

• Liquid Level Gauge Sample Ports are equipped with PitotTubes in lengths of 12", 18", and 24" (pg 19).

• Level gauge sights are available in sizes from1-3/8" to 7-1/2" in length.

• For use with non-pressurized systems.

Pitot Tube Length Sight

12" 18" 24"Dim A Length Fitting

Dim B36300 36322 36344 2.18" 1-3/8" 1/4" NPT Male

36301 36323 36345 2.18" 1-7/8" 1/4" NPT Male

36302 36324 36346 2.18" 2-1/4" 1/4" NPT Male

36303 36325 36347 2.18" 2-3/4" 1/4" NPT Male

36304 36326 36348 2.18" 3-1/4" 1/4" NPT Male

36305 36327 36349 2.18" 4-1/4" 1/4" NPT Male

36306 36328 36350 2.18" 5-1/4" 1/4" NPT Male

36307 36329 36351 2.18" 5-1/2" 1/4" NPT Male

36308 36330 36352 2.18" 7-1/2" 1/4" NPT Male

36366 36388 36410 2.00" 1-3/8" 3/8 NPT Male

36367 36389 36411 2.00" 1-7/8" 3/8 NPT Male

36368 36390 36412 2.00" 2-1/4" 3/8 NPT Male

36369 36391 36413 2.00" 2-3/4" 3/8 NPT Male

36370 36392 36414 2.00" 3-1/4" 3/8 NPT Male

36371 36393 36415 2.00" 4-1/4" 3/8 NPT Male

36372 36394 36416 2.00" 5-1/4" 3/8 NPT Male

36373 36395 36417 2.00" 5-1/2" 3/8 NPT Male

36374 36396 36418 2.00" 7-1/2" 3/8 NPT Male

SELECTION CHART

Stainless steel units are available upon request, please contact Trico’s Customer Service.

SELECTION CHART

Material (Level Gauge) BrassMaterial (Pitot Tube) Carbon SteelSight GlassSeals VitonMaximum Operating Temperature 250ºF

SPECIFICATIONS

Helpful Tip:Liquid Level Gauge SamplePorts purchased after Nov. 1,2004 please use sampleadapter 36133 to draw oilsample from system. (pg 17)

Helpful Tip:

Dim B

Dim ATube Length

2121

Max Pressure3000 PSI (274 bar) – Code 616000 PSI (548 bar) – Code 62

Connect Under Pressure 5800 PSI (400 bar) – Code 62Material Carbon Steel or Stainless SteelCheck Valve Ball Stainless SteelSeals VitonMaximum Operating Temperature -4ºF to 392ºF

Spacer FlangeSampling PortsSpacer FlangeSampling Ports

In situations where flanged fittings provide the optimum and representative place for sampling, Trico’s Spacer Flange Sampling Ports

make it easy. The Code 61 o-ring flange, fitted with Trico’s sample port, allows you to pull your sample between any two standard

flanges. Code 62 and stainless steel o-ring flanges are also available.

FEATURES:• For use with high-pressure hydraulic applications.

• Meets Code 61 and Code 62 pressure ratings for four-bolt flanges.

SPECIFICATIONS

Code 61 Code 62 Pipe Diameter Material36700 36718 1/2” Carbon Steel36701 36719 3/4” Carbon Steel36702 36720 1” Carbon Steel36703 36721 1-1/4” Carbon Steel36704 36722 1-1/2” Carbon Steel36705 36723 2” Carbon Steel36706 36724 2-1/2” Carbon Steel36707 36725 3” Carbon Steel36709 36727 1/2” Stainless Steel36710 36728 3/4” Stainless Steel36711 36729 1” Stainless Steel36712 36730 1-1/4” Stainless Steel36713 36731 1-1/2” Stainless Steel36714 36732 2” Stainless Steel36715 36733 2-1/2” Stainless Steel36716 36734 3” Stainless Steel

SELECTION CHART Helpful Tip:A sample port adapter mustbe used to draw a samplefrom Trico’s spacer flangesampling ports (pg 17).

Filter carts are availableas an effective method totransfer new or usedhydraulic or gear oils fromdrums and reservoirs,please contact Tricofor additional information.

Helpful Tip:

2222

Pipe Thread Weldable Ends Thread Size Dim A Dim B36750 36758 1-1/4” 6” 3.5”36751 36759 1-1/2” 6” 3.5”36752 36760 2” 8” 4.5”36753 36761 2-1/2” 8” 4.5”36754 36762 3” 10” 5.5”36755 36763 4” 10” 5.5”36756 36764 6” 12” 6.5”

Material (pipe) Stainless Steel

Material (sampling port) Carbon Steel or Stainless Steel

Check Valve Ball Stainless Steel

Seals Viton

Maximum Operating Temperature -4ºF to 392ºF

Catch PipeSampline Ports

Catch PipeSampling Ports

Catch Pipe Sample Ports are designed to provide a simple and effective method ofsampling fluids from a non-flooded line. The internal trap has a drain hole forcontinuous trap flushing, providing a truly representative oil sample. The internal trapdesign is packaged in an extended piping nipple with NPT or weld-end for simpleinstallation. Equipped with a standard Trico Sample Port, the sampling method isfurther simplified for reduced chances of contamination.

SPECIFICATIONS

CATCH PIPE WITHCARBON STEEL SAMPLE PORT

Pipe Thread Weldable Ends Thread Size Dim A Dim B36766 36774 1-1/4” 6” 3.5”36767 36775 1-1/2” 6” 3.5”36768 36776 2” 8” 4.5”36769 36777 2-1/2” 8” 4.5”36770 36778 3” 10” 5.5”36771 36779 4” 10” 5.5”36772 36780 6” 12” 6.5”

CATCH PIPE WITHSTAINLESS STEEL SAMPLE PORT

FEATURES:• Internal trap has drain to avoid contamination build-up.

• For use in non-pressurized, non-flooded vertical lines.

36751

Helpful Tip:A sample port adapter mustbe used to draw a samplefrom Trico’s catch pipesampling ports (pg 17).

Helpful Tip:

B

A

Internal Trap

2323

Part Number Description

36813 Clean, 4 oz Sample Bottle, Single

36814 Clean, 4 oz Sample Bottle, Case of 500

36816 Clean, 8 oz Sample Bottle, Regular Wall, Single

36817 Clean, 8 oz Sample Bottle, Regular Wall, Case of 300

36819 16 oz Oil Sample Purge Bottle

36821 Black Plastic Mailer for 4 oz Bottles

Vacuum Pump andSampling Accessories

Vacuum Pump andSampling Accessories

A necessary tool for extracting an oil sample from the sample port, Trico’s Vacuum Pump is compact for ease of transport. When used incombination with a sample port adapter (pg 17), flexible tubing, and a 4-ounce sterilized sample bottle the user is able to connect to anysample port (pg 17) for contamination free oil sampling in the most representative locations.

Trico also offers a heavy-duty Vacuum Pump model that includes a release valve.

FEATURES:• Draws a vacuum of 27 inches of Hg (Mercury)

• Uses 3/16” to 5/16” tubing

Part Number Description36800 Vacuum Pump, Standard36801 Vacuum Pump, Heavy-Duty with Release Valve

VACUUM PUMPS

Part Number Description36806 1/4" OD Poly Tubing, 100 ft Roll36807 5/16" OD Poly Tubing, 100 ft Roll36808 1/2" OD Poly Tubing, 100 ft Roll36809 1/4" OD Poly Tubing, 500 ft Roll36810 5/16" OD Poly Tubing, 500 ft Roll36811 1/2" OD Poly Tubing, 500 ft Roll

TUBING

OIL SAMPLING BOTTLES

36801 36800

36813

Note: Bottles sold separately

Helpful Tip:

Prior to sending oil sampleto lab, mark clearly on bottlemake and model ofequipment, brand, type, andweight of oil and any othernecessary details to ensurecorrect analysis when resultsare returned from the lab.

Helpful Tip:

2424Because airborne contaminants can quickly disrupt and negate your sample, Trico offers specially designed Breather Kits. These kits featurea two-stage breather system that utilizes a filter to block airborne particles and desiccant to remove harmful, unwanted moisture. Thesystem ensures a permanent closure on all hydraulic reservoirs and makes sure the lubricating fluid remains closed off from airbornecontamination throughout the sampling process.

The kit’s filter and desiccant are completely independent of one another and are replaceable. Anoptional filter reminder vacuum gauge can be used to indicate when the filter element on thebreather has become clogged and needs replacing.

A male quick connect can be plumbed to the 6-bolt adapter plate(this plate replaces the standard filler/breather cap) to fit a downpipe for filling reservoirs with new oil through a filter cart withoutopening the system to the environment.

For static sampling of oil from the system reservoir, the 6-boltadapter plate can incorporate a sample port connected to a sampletube. The tube conveniently extends to the middle of the fluid levelin the system reservoir to allow samples to be taken from the exactlocation inside the system every time.

Breather Size Filter Desiccant Silica Gel Water Capacity Air Flow DesiccantVolume (lbs) Replaceable

DB93 3 microns Maroon to orange .50 lb .16 18 CFM

(135 gpm of Yesfluid volume exchange)

DB96 3 microns Maroon to orange 1.00 lb .3218 CFM

(135 gpm of Yesfluid volume exchange)

39102 2 microns Gold to dark green 2.31 lb 0.935 CFM

(260 gpm of Nofluid volume exchange)

SPECIFICATIONS DESICCANT BREATHERS

Note: DB93 and DB96 have an integral 3 micron air filter that is replaceable. 39102 has an integral 2 micron air filter.

FEATURES:• Three-micron replaceable filter element is used to prohibit

the entry of particulate contamination. (DB93 & DB96)

• Optional filter reminder indicates remaining lifeof filter element.

• Color coded desiccant changes colors indicatingreplacement is needed, when maximumadsorption is reached.

• Optional sample port is available with sampling droptubes of 12", 18", and 24" in length.

Note: For desiccant breathers DB93 & DB96

SPECIFICATIONS -REPLACEABLE FILTER ELEMENT (SGB90)

Absolute Micron Rating 3 microns

Air Flow Capacity 135 gpm

Filtration Area 109 sq in

The Watchdog Breathers(pg 28-29) can be used

instead of desiccant breathersDB93 & DB96.

Breather KitsBreather Kits

2525

Tube Length Breather Filter Quick 12" 18" 24" Size Reminder Connect

36836 36842 36848 DB93 No N/A36837 36843 36849 DB93 Yes N/A36838 36844 36850 DB93 Yes 1/2" Male36839 36845 36851 DB93 Yes 1/2" Female36840 36846 36852 DB93 No 1/2" Male36841 36847 36853 DB93 No 1/2" Female36860 36866 36872 DB96 No N/A36861 36867 36873 DB96 Yes N/A36862 36868 36874 DB96 Yes 1/2" Male36863 36869 36875 DB96 Yes 1/2" Female36864 36870 36876 DB96 No 1/2" Male36865 36871 36877 DB96 No 1/2" Female36884* 36890* 36896* Air filter only No N/A36885* 36891* 36897* Air filter only Yes N/A36886* 36892* 36898* Air filter only Yes 1/2" Male36887* 36893* 36899* Air filter only Yes 1/2" Female36888* 36894* 36900* Air filter only No 1/2" Male36889* 36895* 36901* Air filter only No 1/2" Female36905 36908 36911 39102 No N/A36906 36909 36912 39102 No 1/2" Male36907 36910 36913 39102 No 1/2" Female

6 BOLT ADAPTER PLATEWITH SAMPLE PORT

* Does not include desiccant.

Part Number Breather Size Filter Reminder Quick Connect36830 DB93 No N/A36831 DB93 Yes N/A36832 DB93 Yes 1/2" Male36833 DB93 Yes 1/2" Female36834 DB93 No 1/2" Male36835 DB93 No 1/2" Female36854 DB96 No N/A36855 DB96 Yes N/A36856 DB96 Yes 1/2" Male36857 DB96 Yes 1/2" Female36858 DB96 No 1/2" Male36859 DB96 No 1/2" Female36878* Air filter only No N/A36879* Air filter only Yes N/A36880* Air filter only Yes 1/2" Male36881* Air filter only Yes 1/2" Female36882* Air filter only No 1/2" Male36883* Air filter only No 1/2" Female36902 39102 No N/A36903 39102 No 1/2" Male36904 39102 No 1/2" Female

* Does not include desiccant.FILTER REMINDERThe filter reminder indicates the servicelife of the filter element. The indicatorallows the filter to be changed whenneeded, thus avoiding unnecessary laborand premature servicing. When filterreminder indicates the need for the filterelement to be replaced, just push in themanual reset button when a new filterelement is installed.

Normal, clean filter

Indicator shows filter is cloggedand needs replacing.

6 BOLT ADAPTER PLATEWITHOUT SAMPLE PORT

Breather KitsBreather Kits

2626Moisture in lubricating oils is the root cause of prematurely damagingoil and accelerating wear of machine components. As water invades yourfluids it will not only attack the additives in the oils, destroying theirbeneficial properties; but it will also cause damage to the machinesurfaces through corrosion, and rapidly degrade the oil throughincreased oxidation. By understanding the effects of watercontamination, it is easy to see the importance of moisture detectionand removal.

Once water has entered the lubricant, it can exist in one or more of thefollowing forms; dissolved, emulsified, or free water. • Dissolved water contains water molecules that are dispersed one-by-

one through the air in contact with, or within the lubricant. This formof water is invisible to the naked eye.

• Emulsified water contains microscopic pockets of water that are dispersed instable suspension in the oil. As the oil ages this area of water will expand, causingthe lubricant to look cloudy.

• Free water is the phase separation of emulsified water. Free water when mixed with the lubricant readily settles to the bottom of the equipment.

The most damaging forms of water contamination, to both the lubricant andequipment, are emulsified and free water. Therefore, it is important to measure,and or remove water contamination prior to the formation of emulsifiedand free water.

DETECTING WATER CONTAMINATIONTrico has developed on-line monitoring devices that measure moisture content as apercentage of saturated relative humidity. This measurement is taken below the saturationpoint of the oil, before phase separation will occur. Measuring saturated relative humidityindicates directly whether there is a risk of free water forming. The measurement isindependent of the type, age, or temperature of the oil.

REMOVING WATER CONTAMINATION:A proven method of removing water contamination from lubricating fluids is using silicagel technology. Silica gel extracts water vapor from the air as it is drawn through a silicagel bed, as well as covering a wide range of temperatures. Most units using silica geltechnology to remove moisture provide a fail-proof method of determining whenreplacement is necessary. Trico incorporates a visual indicator to accomplish this. Thesilica gel used changes from gold to dark green when maximum adsorption has been reached.

Trico provides products that will detect and remove moisture from lubricating oils; however the rootcause of moisture contamination should be identified and corrected to maximize the life of thelubricant and equipment.

Introduction to MoistureDetection & Removal Systems

Introduction to MoistureDetection & Removal Systems

By the time free water becomes visible, damage is alreadyoccurring to the oil and equipment.

Three stages of water within a lubricating oil.

Watchdog Breather installed on a hydraulic reservoir.

Dissolved water(invisible)

Oil water emulsion(cloudy)

Free water(phase separation)

Hydrolert Transducer installed on a bank of rollers at a steel mill facility.

2727Hydrolert® ProductsHydrolert® Products

The Hydrolert products are designed to monitor levels of moisture in lubricating oils. Although there are many ways of detectingmoisture in oil, most of these require that a sample be taken from the piece of equipment. Research has shown that over 85% of alloil sampling or oil changes were done either unnecessarily or after damage has already occurred.

The Hydrolert products warn of increasing moisture contamination prior to 100% Saturated Relative Humidity (SRH), allowingadequate time for corrective action to be taken before free water occurs. In addition, knowing the oil needs to be changed before it

begins losing protective properties prolongs equipment life and not havingto change the lubricant until saturation is imminent helps reducemaintenance, material, and labor costs.

The Hydrolert Transducer is a real timeautomatic moisture sensor for lubricants.

It is designed for use with all types of rotatingequipment that use oil to lubricate. When used with the

Hydrolert DHS and DHM it will provide an actual SaturatedRelative Humidity reading. The transducer is also capable of beingincorporated into any type of system capable of reading a 4-20 ma signal. This allows the user to set alarm levels and store and interpret readings for trending purposes.

• Real-time moisture level sensing forlubricating oils

• Corrosive resistantconstruction

• Convenient 1/2” NPTmounting thread

Power RequiredMaterialPeak AccuracyOperating RangeWire ConnectionNPT ConnectionOutputAccuracyFor Use With

SPECIFICATIONS14-28 VDC

Anodized Aluminum32°F to 185°F-10°F to 210°F

4 Pin Quick Disconnect1/2˝ NPT4-20 ma+/- 5 %

DHS-1050, DHM-1050, or incorporated into a system

capable of reading 4-20ma

Power RequiredBaseCoverPeak AccuracyOperating RangeBattery LifeWire ConnectionSignal OutputConnection% RH IndicationFor Use With

DHS-1050 & DHM-1050

120 VACPolycarbonatePolycarbonate32°F to 185°F

-10°F to 210°FN/A

Quick DisconnectDigital display 0-100% SRH

N/A0-100% SRH

Hydrolert® Transducer

DHM-1050DHS-1050

SPECIFICATIONS

DIMENSIONAL DATAØ2.00

Ø1.56 Ø1.80

5.56

4.56

1/2˝ NPT

1.50ACROSSFLATS

(NOTE: All dimensions are in inches.)

PartNumber

31940319413194231943319443194522411R

Description

DHS-1050 (transducer included)

DHM-1050 -1 transducerDHM-1050 -2 transducersDHM-1050 -3 transducers

DHM-1050 -4 transducersDHM-1050 -5 transducersHydrolert Transducer (only)

SELECTION CHART

DHS-1050 & DHM-1050• Real-time remote

moisture level sensing• Digital display for easy

indication of moisture level• Corrosion resistant

construction• Mount up to 500 feet away

from transducer

• Convenient wall or panelmounting

• Continuous monitoring ofmoisture level

DHM-1050 (only)• Monitors up to five locations• Erasable sensor location decal

2828Watchdog®

Desiccant BreathersWatchdog®

Desiccant Breathers

APPLICATIONS:The Watchdog® desiccant breathers ensure optimum protection of industrial equipment by prohibiting the entry of moisture andparticulate contamination. Contaminants enter industrial equipment as pressure differentials or fluid level changes occur. The Watchdogbreathers are ideal for circulating oil systems, oil sumps, process tanks, storage tanks, vacuum systems, hydraulic systems, transformercases, or anywhere that equipment needs to be dry and clean.

Watchdog desiccant breathers perform two very important functions.

1. They adsorb unwanted moisture inside industrial equipment using silica gel technology. Unwanted moisture can lead to corrosion,shortened fluid life, and additive depletion.

2. They collect airborne solid particles by means of a dual, anti-static filter system. This reduces the amount of abrasive and damagingcontaminants that create sludge build-up inside the fluid reservoir.

FEATURES:• Bi-directional air flow - A 360º air flow allows air to be breathed in and out as fluid

level changes or differential pressures occur.

• Dual filtration system - A two micron filter is located at the top and bottom of thesilica gel bed. The top filter removes particle contamination from atmospheric air andthe bottom helps with dust created by the silica gel beads contacting each other.

• Water vapor adsorbent - The silica gel used in the Watchdog desiccant breathers adsorbup to 40% of its own weight.

• Durable construction - Watchdog desiccant breathers are manufactured from ruggedABS plastic and impact modified acrylic.

• Color indicator - When maximum adsorption is reached the silica gel turns from goldto dark green, indicating replacement is needed.

• Activated carbon - As air is expelled, it passes through activated carbon which removesoil vapors, fumes, and odors (except for 39131, 39132, 39133, and 39134).

Solid ContaminantFilter (2 µm)

Air Diffuser

360° Air Flow

High CapacityWater VaporAdsorbent

Solid ContaminantFilter (2 µm)

Activated CarbonRemoves Oil Vapors

CLEAN DRY AIR

2929Watchdog®

Desiccant BreathersWatchdog®

Desiccant Breathers


ADAPTER SELECTION CHART:(part numbers 39100, 39101, 39102 and 39108)

Flange adapter, without mounting holes

Flange adapter, with 6 ANSI mounting holes

Threaded adapter, 1˝ NPT male x 1˝ slip fit

Threaded adapter, 3/4˝ NPT male x 1˝ slip fit

Bayonet adapter

Spin-on adapter, 1˝-12 UNF female x 1˝ slip fit

Spin-on adapter, 1-1/2˝-16 UNF female x 1˝ slip fit

Bypass adapter

Adapter, 1/2˝ NPT male x 1˝ slip fit

39200

39201

39202

39203

39204

39205

39206

39207

39216

ADAPTER SELECTION

Watchdog desiccant breathers are easily installed using oneof several adapters designed for different applications.

THE BYPASS ADAPTER

The Bypass Adapter is designed forapplications where there is very heavy oilmist being expelled from the equipment. When air is breathed into the equipment,it passes through the Watchdog® and iscleaned and dried. When the air isbreathed out of the equipment it enters the adapter and is expelled to the outsidewithout passing back through the breather. This protects the breather fromoil contamination.

BypassAdapter

3920839210392123921339215392093921139214

Illustration T2T1TricoPart Number

ADAPTER SELECTION CHART:(part numbers 39131, 39132, 39133 and 39134)

1/2˝ NPT1/2˝ NPT1/2˝ NPT1/2˝ NPT1/2˝ NPT1/4˝ NPT3/8˝ NPT3/4˝ NPT

1/4˝ NPT3/8˝ NPT1/2˝ NPT3/4˝ NPT1˝ NPT

1/2˝ NPT1/2˝ NPT1/2˝ NPT

T1

T2

T1

T2

FlangeAdapter

ThreadedAdapter

Bayonet Adapter

Spin-onAdapter

*The size of the reservoir does not determine the type of breather to use. The airflow both in and out of the reservoirdetermines the type to choose. Two factors create airflow, they are temperature variations (which cause very low airflowrates) and fluid volume changes.

SELECTION CHART(Desiccant Breathers)

PartNumber391003910139102

39108

39131391323913339134

Height(inches)

4.756.259.25

11.25

23.25

23.25

Diameter(inches)

555

5

22

3.253.25

ConnectionSize

1˝ Male Friction Fit1˝ Male Friction Fit1˝ Male Friction Fit

2˝ Male NPT

1/2˝ Female NPT1/2˝ Female NPT1/2˝ Female NPT1/2˝ Female NPT

Water Capacitylbs / ltr0.2 / 0.10.4 / 0.20.9 / 0.5

1.3 / 0.6

.032 / .014

.056 / .027

.104 / .049.18 / .087

Silica GelVolume.59 lb.1.20 lb.2.31 lb.

3.1 lb.

.08 lb.

.15 lb.

.27 lb.

.48 lb.

Air Flow

35 CFM(260 gpm of fluidvolume exchange)



SPECIFICATIONS:• Material - ABS plastic and

impact modified acrylic

• Maximum OperatingTemperature - (-20ºF to 200ºF)

3030 Watchdog® Oil DryerWatchdog® Oil Dryer

2.25

Air

Bearing Housing

Oil

4.75

3.28

5.72

1NPT

1/2 NPT31808

31807 &31848

(NOTE: All dimensions are in inches.)

REPLACEMENTSDescription

Replacement cartridge for model numbers 31807 and 31808

SPECIFICATIONSConnectionsMaterialMax. Operating Temp.

31807Polysulfone

325°F/160°C

31808Polysulfone

325°F/160°C

31807Oil Dryer

Viewport

Model No.21841R

SELECTION CHART Model No.

31807318083184831849

Description1˝ NPT Polysulfone Oil Dryer with viewport

1/2˝ NPT Polysulfone Oil Dryer without viewport1˝ NPT Metal/Glass Oil Dryer with viewport

1˝ Metal/Glass Oil Dryer with viewport & wire guard

31848 & 31849Glass & Aluminum

325°F/ 160° C

FEATURES:• Desiccant cartridges change color

to indicate when replacement is required.

• Cartridge replacement is simple and takes less than one minute.

• Multiple purpose - serves as a viewport, a fillport and an oil dryer.

APPLICATIONS:The WATCHDOG oil dryer is a non-vented system designedto remove water vapor from the air as it is drawn through abed of silica gel. It is ideal for bearing housings and otherapplications where moisture condensation must beminimized. The compact design and standard thread size are designed to simplify installation. Equipment can beprotected from internal moisture damage when theWATCHDOG Oil dryer is installed.

31848 &31849

31807 31808

3131Introduction to

Fluid Handling SystemsIntroduction to

Fluid Handling Systems

• Ruggedness - Fluid handling containers need to be toughenough to endure being tossed, slammed, dropped, and bumped.

• Closeable - Being able to close the fluid handling container tightis essential to keeping the lubricants clean. If the container isunable to be closed, there is no assurance that contamination willbe controlled.

• Easy to handle - Fluid handling containers should becomfortable enough for personnel to carry through out thefacility when full of oil.

• No funnels - Funnels are a huge contamination risk because theyare hard to clean, and are usually used with a variety oflubricants. They are also stored in areas where they are exposedto dirt and other contaminants. The ideal fluid handlingcontainer is designed with a pour spout that eliminates the needfor a funnel.

• Lubricant identity - Fluid handling containers should have anidentifier for indicating the type of fluid within the container.Identifiers can come in the form of color, shape, size, or tags.

• Non-reactive - Some lubricant additives can interact withspecific materials that some fluid handling containers aremanufactured with. Plastics or stainless steel are the mostdesirable materials available.

• Cleanable - At some point in time the fluid handling containermay need to be cleaned. The container should be designed tofacilitate easy cleaning to ensure effective contamination control.

• Pumping option - In some areas where access is limited,pouring oil from a fluid handling container is not possible. Inthis case, the container should easily adapt to a pump that willallow the lubricant to flow effectively into the equipment.

Contamination is the root cause to lubricant degradation andmachinery failure. It must be managed to assure properperformance. The selection of a fluid handling system isfundamental to the success of effectively and efficiently deliveringclean lubricants to the machinery.

Lubricants are frequently topped off or replaced in harsh conditions, where the potential for contamination from dust, dirt, and water isthe greatest. Unfortunately, the choice of a container to store, dispense and transfer the lubricant to the machinery is often questionable.Quite often these containers range from modified open topped coffee cans, jugs, buckets, and even old watering containers. Thesecontainers provide no protection to the lubricant from airborne contaminants. Below is a list of some important features to look forwhen selecting a fluid handling system.

Improper fluid handling methods

Proper fluid handling system

Open top can used for filling oil sumps can be a source of contamination.

3232 Oil Safe® ProductsOil Safe® Products

DRUMS – 1.5, 2, 3, 5, & 10 L

These robust and durable drums feature a wide opening forrapid no spill filling, easy cleaning and will fit any lid.

OIL SAFE® PUMP

Ideal for those awkward and hard to reach oil top offapplications such as motorcycles, gearboxes, lathes andmilling machines. Supplied with outlet hose and anti-dripnozzle. The Oil Safe® pump delivers 1 liter forapproximately every 14 strokes. Simply fit the pump to aUtility Lid and mate with a 3, 5, or 10 liter drum. Forsmall reservoirs and filler holes an optional pump reducernozzle is available that slides over Oil Safe® pump nozzle.Reduces from 3/8˝ OD - 1/4˝ ID.

SPOUT HOSE EXTENSIONS

Fitting a Stretch or Stumpy Spout Hose Extension, willenable controlled pouring into awkward or hard to reachplaces. The hose can be pulled from the fitting and cut tolength as required.

Oil Safe® products provide a safe, easy method of transporting,handling, and dispensing lubricating fluids in a wide variety ofapplications. These products are durable and built with HighDensity Polyethylene (HDPE) to perform in hostile environments.Ultra-violet and anti-static agents have been added to protect theproduct from ultra-violet degradation and the accumulation of staticelectricity. The product lids and drums are interchangeable and comein a variety of sizes and styles to suit individual needs. Lids areavailable in ten colors – yellow, red, blue, green, purple, orange,black, dark green, tan, and gray for easy identification of fluid type.

PRODUCT SELECTION:STORAGE LID

This compact and durable lid allows pre-filleddrums to be easily transported and stored.

UTILITY LID

This multi-purpose lid allows for rapid pouring ofoils, making it ideal for topping off machinerysuch as crankcases or large engine blocks. Outlethole on utility lid is 50mm. Fitting an Oil Safe®Pump to the Utility Lid will allow oil to bepumped out of 3, 5, or 10 liter drum.

STRETCH SPOUT LID

Ideal for use with lower viscosity oils or whereprecise pouring is required. For precision pouringapplications involving oil viscosity grades of ISO220 or less. Spout valve has a 12mm outlet hole.

STUMPY SPOUT LID

Ideal for topping off engines, crankcases, and otherapplications where higher flow is required. Spoutvalve has a 24mm outlet hole.

MINI SPOUT LID

The Mini Spout Lid has an outlet diameter ofapproximately 7mm, making it ideal for controlledpouring into small reservoirs or filler holes.

SELECTION CHART - LidsYellow31872

31873

31871

31870

31909

Red31881

31888

31895

31902

31910

Blue31882

31889

31896

31903

31911

Purple31887

31894

31901

31908

31916

Green31883

31890

31897

31904

31912

DarkGreen31884

31891

31898

31905

31913

Black31885

31892

31899

31906

31914

Orange31886

31893

31900

31907

31915

Tan31919

31921

31923

31927

31925

Gray31918

31920

31922

31926

31924

Description

Storage Lid

Utility Lid

Stretch Spout Lid

Stumpy Spout Lid

Mini Spout Lid

SPECIFICATIONSO-ring

Temperature Range

Material

Additives

Buna-N

-40°F to 176°F

High Density PolyethyleneUV stabilizers and anti-statics

NOT SUITABLE FOR USE WITH FUELS OR SOLVENTS

SELECTION CHARTDescription

1.5 Liter Drum

2 Liter Drum

3 Liter Drum

5 Liter Drum

10 Liter Drum

Oil Safe® Pump

Stretch Spout Hose Extension

Stumpy Spout Hose Extension

Pump Reducer Nozzle

ModelNo.

319283187731878318793188031874318763187531917

3333Oil Safe® ProductsOil Safe® Products

Spout valve regulates oil flow and reducesoil contamination due to rain, sand, and

dust entering through open spouts

Convoluted drum profileand large inlet hole allowsfor easy grip when filling

Nozzles twist close toreduce contamination

All lids and drumsare interchangeable

Buna-N o-ring seals lubricantfrom the external environment

Wide range of spouts, hoses,and nozzles allow easy filling

to awkward points

See through graduateddrums make liquid levelseasy to see and measure

Large carry handle,which doubles up as ahook so drums can be

hung up out of the way

High heat and chemicalresistance with ultra-violet and

anti-static additives

Drum label included to provide easyidentification of lubricant type

FEATURES:

Lids available in tencolors – yellow, red,blue, green, purple,orange, black, dark

green, tan, and gray foreasy identification of

fluid type

MANUFACTURED FOR TRICO MFG. CORP.UNDER CO-BRANDING AGREEMENT.

OIL SAFE® IS A REGISTERED TRADEMARK OF

OIL SAFE SYSTEMS PTY. LTD.

OIL SAFE® UAN 558 343 011

3434Introduction to

Gravity Feed OilersIntroduction to

Gravity Feed Oilers

The purpose of gravity feed lubrication is to provide a reliable andcontinuous supply of oil to bearings, gears, chains, and other rotating ormoving machinery components. As the name applies, these systemsoperate using gravity feed principle. A supply reservoir is used to feedlubricant through piping, by means of gravity, to the point of lubrication.These systems can also consist of a number of manifolds or distributioncenters from which oil is directly piped to the surface to be lubricated.Each point has its own independent piping and set of connections.Gravity feed lubrication is an alternate means of lubricating machinerycomponents rather than using automatic systems such as centralizedlubrication. The method of employing gravity feed lubrication consists ofdrip-feed, chain, and wick feed lubrication.

Drip-feed Oilers: A drip-feed oiler consists of a simple reservoir mountedin a convenient position for filling, while allowing the piping to beconnected to the point of lubrication. Typically the rate of feed, to eachlubrication point, is regulated by a needle valve, which is manuallyadjustable. In addition, manifolds can be used with drip-feed oilers tosupply lubricant to multiple points.

Chain Oilers: Chain oilers automatically apply a film of lubricant tochains, gears, slides, irregular surfaces or out-of-the-way oscillating parts.They greatly reduce link wear, stretch, friction, rust, and corrosion. Chainoilers are similar in operation to drip-feed oilers however; they contain anapplicator to supply lubricant to the source. Applicators are available in avariety of styles for both lubricating and cleaning purposes of the chain.

Wick Feeds Oilers: Wick feed oilers combine gravity feed with capillaryaction to provide a constant rate of oil to the lubricating point, regardlessof fluid level in the reservoir. The capillary action is provided by the useof various wick sizes. The rate of feed is adjusted with the use of differentwick sizes or viscosity of oil.

Gravity feed oilers bring the benefits of automatic lubrication without thehigh cost. They provide a simplistic, yet reliable method, of keepingcomponent parts of industrial machinery lubricated. Trico offers a widerange of gravity feed oilers for lubricating single or multiple points and foruse in conjunction with brush applicators.

Gravity feed oilers on a mud washing drum.Gravity feed oiler

on drying machine.

Chain oiler lubricating a chain on a trommel screen.

3535Gravity Feed OilersGravity Feed Oilers

APPLICATIONS:The gravity feed oilers work in a widerange of industrial lubricatingapplications. The rate of oil feed isadjustable and a lock ring maintainsthe setting. In bearing or gearlubrication, the gravity feed oilersprovide dependable lubrication in themost demanding environments.

FEATURES:• Three position toggle switch

provides easy to use on-off control,and a flushing option to avoid dry start-ups.

• Vented sight chamber ensuresproper operation when used withtight or high speed bearings.

• Copper brazing of all steelconnections provides long life and leak proof design.

KG

• Heavy wall glass reservoirs and sight chambers operate continuously at 250ºF.

• Nickel plating offers superiorcorrosion resistance.

KL

• Plastic reservoirs have reinforced ribs for long life and impact resistance.

• Zinc plating resists corrosion.

Max. Operating Temp.ReservoirOil SightGasketsMaterialsFinishNeedle Valve

250ºF ContinuousHeavy Wall Heat Resistant GlassHeavy Wall Heat Resistant GlassBuna-NHeavy Gauge SteelBright Nickel PlateSteel

SPECIFICATIONS - KG

370113701237013370143701537016370173701837019

Model No. Capacity Connection(NPT)

Dimensions (in.)BA

SELECTION CHART - KG

1-5/81-5/82-1/82-1/82-5/82-5/82-5/83-1/83-1/8

3-1/43-1/4

44

4-5/84-5/84-5/85-3/85-3/8

1 oz.1 oz.

2.5 oz.2.5 oz.5 oz.5 oz.5 oz.10 oz.10 oz.

1/81/41/81/41/81/43/81/43/8

A

Max. Operating Temp.ReservoirOil SightSight GasketsMaterialsFinishNeedle Valve

165ºF ContinuousButyrate PlasticAcrylic PlasticBuna-NSteel and BrassBright Zinc PlatedSteel

SPECIFICATIONS - KL

30320303213032230323303243032530326303273032830329

Model No. Connection(NPT)

Dimensions (in.)BA

SELECTION CHART - KL

1-5/81-5/8

1-15/161-15/162-5/162-5/162-5/162-5/82-5/82-5/8

2-5/82-5/83-1/163-1/163-7/83-7/83-7/8

4-15/164-15/164-15/16

1 oz.1 oz2 oz.2 oz.4 oz.4 oz.4 oz.8 oz.8 oz.8 oz.

1/81/41/81/41/81/43/81/81/43/8

Capacity

30325

37016

KL

KG

A

B

1 7/16

B

1 7/16

3636 Atlas Gravity Feed OilersAtlas Gravity Feed Oilers

APPLICATIONS:The Atlas gravity feed oiler is used in heavy-duty applicationswhere a large oil capacity is needed and an adjustable rate of oil isrequired. Silver brazed construction of the reinforced brassassembly provides long life in high vibration applications.

The Atlas oiler is adjustable for varying rates of oil flow used inbearing or machinery lubrication. The adjustable drip rates areeasily set and controlled with a lock ring for maximum versatility.


Reservoir

Oil Sight

GasketMaterialFinishNeedle Valve




Buna-NBrassLacquered Satin FinishBrass

SPECIFICATIONS

31543 32117

Dimensions (in.)

Dimensions (in.)

Model No.

315113151231517315183154331581

-

32111321173213332181

-

3201032016320323208032081

3-1/83-5/84-7/165-11/165-11/16

BMounting

StudCapacityModel No.

A

SELECTION CHART - ACL

6-5/87-5/8

8-11/1610-13/1615-7/8

10 oz.1 pt.1 qt.

2.5 qt.1 gal.

3/4-163/4-163/4-163/4-163/4-16

Locking Ring Mechanism - Remote Mounting - 1/4˝ tube connector furnished.

Acrylic

3-1/83-1/83-5/83-5/84-7/165-11/165-11/16

BGlass AcrylicCapacity

A

SELECTION CHART - AL

5-9/165-9/166-9/166-9/167-5/89-3/4

14-13/16

10 oz.10 oz.1 pt.1 pt.1 qt.

2.5 qt.1 gal.

1/43/83/81/21/21/21/2

Connection(NPT)

31410314113141631417314323148031481

Locking Ring Mechanism - Direct Mounting

AL ACL

Glass

A

B

A

B

1 7/8

1 3/8

FEATURES:• Heavy wall heat resistant glass reservoirs and sights

providing service in temperatures to 250°F.

• Acrylic reservoir versions have heavy walls for long life inapplications to 165°F.

• Three position toggle switch provides easy to use on-offcontrol, and a flushing option to avoid dry start-ups.

• Direct mounting with NPT threads (AL) or remotemounting with 3/4-16 mounting stud and 1/4˝ tubingconnections (ACL) simplifies installation.

• Silver brazing of all brass construction provides long lifeand leak proof design.

• Clear lacquer finish resists corrosion.

3737PC Oil CupPC Oil Cup

APPLICATIONS:PC oil cups serve a dual purpose of providing a small oilreservoir or being used as an oil gauge. The PC oil cup is ideal for applications where it can be directly mounted to a bearing housing, gear box or any other industrial equipmentthat requires lubricant.

FEATURES:• Dust proof, self-closing fill caps supplied with all models.

• Plastic reservoirs have reinforcing ribs for long life andimpact resistance.



31141 PC

A

B

15/16

31111311123112131122311413114231143311813118231183

Model No. CapacityConnection

(NPT)Dimensions (in.)

BA

SELECTION CHART

1-5/81-5/8

1-15/161-15/162-5/162-5/162-5/162-5/82-5/82-5/8

1-5/81-5/82-5/162-5/16

333444

1 oz.1 oz2 oz.2 oz.4 oz.4 oz.4 oz.8 oz.8 oz.8 oz.

1/81/41/81/41/81/43/81/81/43/8

165ºF ContinuousButyrate PlasticSteelBright Zinc Plated

Max. Operating Temp.ReservoirMaterialFinish

SPECIFICATIONS

3838 Vari-Feed Wick OilersVari-Feed Wick Oilers

APPLICATIONS:Vari-Feed wick oilers are used to provide a controlled amount ofoil to a bearing or other machinery part. The principle of deliverycombines gravity feed with capillary action in the wick to providea constant feed rate of oil regardless of the fill level in the reservoir.Feed rate is determined by the viscosity of the oil and the type ofwick being used.

Two styles of operation are available depending on the application.When continuous delivery is required the N or NS models are used.

For on-off control of the oiler, the NA and NAS models have afiller cap with gasket that stops oil delivery when fully closed. Byturning the fill cap slightly, the threaded air vent is openedallowing oil to flow.

31042 30942 30842 30741

Model No.

Dimensions (in.)Model No.

Max. Operating Temp.ReservoirOil SightSight GasketsWickingMaterialFinish

30711307123072130722307413074230743307813078230783

1-5/81-5/8

1-15/161-15/162-5/162-5/162-5/162-5/82-5/82-5/8

BType N Type NSCapacity A

1-5/81-5/82-5/162-5/16

333444


1/81/41/81/41/81/43/81/81/43/8

Connection(NPT)

30811308123082130822308413084230843308813088230883

165ºF ContinuousButyrate PlasticAcrylicBuna-NWire Cored CottonSteel and BrassBright Zinc Plated

SPECIFICATIONS

Dimensions (in.)

30911309123092130922309413094230943309813098230983

1-5/81-5/8

1-15/161-15/162-5/162-5/162-5/162-5/82-5/82-5/8

BType NACapacity A

SELECTION CHART - NA, NAS

22

2-7/162-7/163-1/43-1/43-1/44-5/164-5/164-5/16


1/81/41/81/41/81/43/81/81/43/8

Connection(NPT)

310113101231021310223104131042

-310813108231083

DescriptionModel No. Length

3070130702307033070430705

1-3/8˝

Replacement WicksPacked 50 of one color per carton. Also sold by the foot.

SELECTION CHART - N, NS

N

Type NAS

White - Very Fast Feed WickGreen/White - Fast Feed WickGreen - Medium Feed WickRed/White - Slow Feed WickRed - Very Slow Feed Wick

FEATURES:• Feed rate is constant and adjustable only by changing to a

different wick.

• 5 wick speeds are available and color coded for easyreplacement or installation. A multi-pack of different wickspeeds is included with each oiler.

• Dust proof caps supplied with N and NS models. NA andNAS models have sealed cap and operate only when cap is invent position.

• Plastic reservoirs have reinforcing ribs for long life.

• Oil sights available on NS and NAS models for visual indication of oil flow.



NAS

B

A

2 1/8

NA

B

A

1 1/32

NS

A

B

2 1/8

A

B

1 1/32

3939CA & CAE Chain OilersCA & CAE Chain Oilers

Voltage120V 60 Hz240V 60 Hz480V 60 Hz

DesignatorBCD

SOLENOID VOLTAGE

FEATURES:• Toggle shut-off with locking ring (CA model) provides easy

to use manual control.

• Solenoid version (CAE model) allows machine interface formaximum versatility.

• Plastic reservoirs have reinforcing ribs for long life.

• Adjustable adapter allows easy setting of applicator to correct height.

• Brazed construction provides long life and leak proof design.

APPLICATIONS:CA and CAE chain oilers are designed for light duty lubricationof small chains. They operate on a gravity feed principle supplyingan adjustable amount of oil through an applicator to the chain.

In applications requiring automatic control of the oiler, solenoidversions are available.

Max. Operating Temp.ReservoirOil SightSight GasketMaterial

Finish

“CA” Needle Valve“CAE” Sight Needle Valve“CAE” Packing GlandSolenoid - UL/CSA Listed

165ºF ContinuousButyrate PlasticAcrylic PlasticBuna-NSteel and BrassBright Zinc Plated SteelLacquered Satin Finish Brass

SteelBrassGraphiteStainless Steel/Brass

SPECIFICATIONS

3550335504

Model No. Capacity MountingStud

Dimensions (in.)BA

SELECTION CHART - CA

2-5/162-5/8

4-3/45-3/4

4 oz.8 oz

1/2-201/2-20

Manual Control

3550535506

Model No. Capacity MountingStud

Dimensions (in.)BA

SELECTION CHART - CAE

2-5/162-5/8

34

4 oz.8 oz

3/4-163/4-16

Electric Solenoid Control - See “How to Order”

35503

ACCESSORIES: Applicators are ordered separately and areshown on page 46.

HOW TO ORDER: Using the solenoid voltage chart, add a“B”, “C”, or “D” to the model number to specify the correct voltage on solenoid versions.

CA

CAE

AA

B

B

2 1/4 + 1/4 6 1/4 + 1/4

2 1/8

2 1/8

35503

Adapter allows

adjustment for wear

and height.

4040 CB & CBE Chain OilersCB & CBE Chain Oilers

A

B B

2 1/16 + 1/4

6 1/4 + 1/4

APPLICATIONS:CB and CBE chain oilers are designed for nearly all types of chain lubrication. Theyoperate on a gravity feed principle supplying a pre-set amount of oil through anapplicator to the chain. With heavy wall acrylic or heat resistant glass reservoirs, and allbrass construction, they operate in a wide range of applications. In applicationsrequiring automatic control of the oiler, solenoid versions are available.

FEATURES:• Toggle shut-off with locking ring (CB model) provides easy to use manual control.

• Solenoid version (CBE model) allows machine interface for maximum versatility.

• Mounting stud simplifies installation to customer supplied bracket.

• Acrylic reservoirs are heavy wall design for service to 165°F. Heat resistant glassreservoirs operate in temperatures to 250°F.


• Silver brazing of all brass construction provides long life and leak proof design.

• Clear lacquer finish of brass components resist corrosion.


DesignatorBCD

SOLENOID VOLTAGE

Other Voltages and Frequencies Available. Consult Factory.

3552735529355313553335535

35526355283553035532

-

3-1/83-5/84-7/165-11/165-11/16

BGlassMounting

StudCapacityDimensions (in.)Model No.

A

SELECTION CHART - CBE

4-1/165-3/166-3/168-5/1613-5/16

10 oz.1 pt.1 qt.

2.5 qt.1 gal.

3/4-163/4-163/4-163/4-163/4-16


Acrylic


Reservoir and Sight

GasketMaterialFinish“CB” Needle Valve“CBE” Sight Needle Valve

Solenoid



Buna-NBrassLacquered Satin FinishBrassBrassStainless Steel Plunger, Brass BodyUL/CSA Listed

SPECIFICATIONS

HOW TO ORDER: Using the solenoid voltage chart,add a “B”, “C”, or “D” to the model number to specify thecorrect voltage on solenoid versions.

35516 35530-B

2 1/8

CB

A

2 1/8

CBE

3551335515355173551935520

35512355143551635518

-

3-1/83-5/84-7/165-11/165-11/16

BGlassMounting


A

SELECTION CHART - CB

6-1/27-9/168-9/1610-3/415-3/4

10 oz.1 pt.1 qt.

2.5 qt.1 gal.

3/4-163/4-163/4-163/4-163/4-16

Manual Control

Acrylic

ACCESSORIES:Applicators areordered separately and are shown on page 46.

Adapter allows

adjustment for wear

and height.

4141CC & CCE Chain OilersCC & CCE Chain Oilers

35550355523555435556

-

3555135553355553555735559

3-1/83-5/84-7/165-11/165-11/16

BGlassMounting

StudCapacity A4-1/165-3/166-3/168-5/1613-5/16

10 oz.1 pt.1 qt.

2.5 qt.1 gal.

3/4-163/4-163/4-163/4-163/4-16

AcrylicModel No. Dimensions (in.)

SELECTION CHART - CCEElectric Solenoid Control - See “How to Order”

35544 35554-B

FEATURES:• Toggle shut-off (CC model) provides easy to use manual control.

• Solenoid version (CCE model) allows machine interface for maximum versatility.


• Acrylic reservoirs are heavy wall design for service to 165°F. Heat resistant glassreservoirs operate in temperatures to 250°F.



• Clear lacquer finish of brass components resists corrosion.

APPLICATIONS:CC and CCE chain oilers are designed for chain lubrication on wide or ganged chainsup to 4 inches. They operate on a gravity feed principle supplying a pre-set amount ofoil through an applicator to the chain. With heavy wall acrylic or heat resistant glassreservoirs, and all brass construction, they operate in a wide range of applications.

In applications requiring automatic control of the oiler, solenoid versions are available.


Reservoir and Sight

GasketMaterialFinishPacking GlandSight Needle Valve

Solenoid



Buna-NBrassLacquered Satin FinishGraphiteBrass

Stainless Steel PlungerBrass Body, UL/CSA Listed

SPECIFICATIONSCCE

A

B

2 1/8

2

6 1/4 + 1/4

A

B

5 7/16 + 1/4

2 1/8

2

CC

-355423554435546

-

3554135543355453554735549

3-1/83-5/84-7/165-11/165-11/16

BGlassMounting


A5-1/166-3/167-3/169-5/1614-5/16

10 oz.1 pt.1 qt.

2.5 qt.1 gal.

3/4-163/4-163/4-163/4-163/4-16

Acrylic

SELECTION CHART - CCManual Control


DesignatorBCD

SOLENOID VOLTAGE



ACCESSORIES:Applicators areordered separately and are shown on page 46.

Adapter allows

adjustment for wear

and height.

4242 D & DE Full Flow DispensersD & DE Full Flow Dispensers

A

B

1 13/16

D

A

B

3 1/4

DE

FEATURES:• Toggle shut-off (D model) provides easy to use manual control.

• Solenoid version (DE model) allows machine interface for maximum versatility.


• Acrylic reservoirs are heavy wall design for service to 165ºF. Heat resistant glassreservoirs operate in temperatures to 250ºF.



35564 35574-B

35570355723557435576

-

3557135573355753557735579

3-1/83-5/84-7/165-11/165-11/16

BGlassMounting


A

SELECTION CHART - DE

4-1/165-3/166-3/168-5/1613-5/16

10 oz.1 pt.1 qt.

2.5 qt.1 gal.

3/4-163/4-163/4-163/4-163/4-16

Electric Control - 1/4 Tube Connector Furnished. - See “How to Order”

Acrylic

GasketMaterialFinish

Solenoid

Needle Valve


Reservoir



Buna-NBrassLacquered Satin Finish

Stainless Steel Plunger and BrassBody UL/CSA Listed

Brass

SPECIFICATIONS

35560355623556435566

-

3556135563355653556735569

3-1/83-5/84-7/165-11/165-11/16

BGlassMounting


A

SELECTION CHART - D

5-1/166-3/167-3/169-5/1614-5/16

10 oz.1 pt.1 qt.

2.5 qt.1 gal.

3/4-163/4-163/4-163/4-163/4-16

Manual Control - 1/4 Tube Connector Furnished.

Acrylic

APPLICATIONS:Trico full flow dispensers are used to lubricate bearings, chains, and other machineryparts when remote valves or manifolds are used. This allows for easy access to the oilreservoir when the valve or manifold is located in a difficult to reach spot. Thesedispensers are also used in applications where multiple point lubrication is requiredfrom one reservoir of oil. With heavy wall acrylic or heat resistant glass reservoirs,and all brass construction, they operate in a wide range of applications. Inapplications requiring automatic control of the oiler, solenoid versions are available.


DesignatorBCD

SOLENOID VOLTAGE



ACCESSORIES: V series valves and VM manifolds areordered separately and shown on page 44.

Applicators are ordered separately and areshown on page 46.

4343E & EE Multiple Feed OilersE & EE Multiple Feed Oilers

Dimensions (in.)

36000360023600436006

-

3600136003360053600736009

3-1/83-5/84-7/165-11/165-11/16

BGlassMounting

StudCapacityModel No.

A

SELECTION CHART - E

5-1/166-3/167-3/169-5/1614-5/16

10 oz.1 pt.1 qt.

2.5 qt.1 gal.

3/4-163/4-163/4-163/4-163/4-16

Manual Control

Acrylic

A

B

5 1/8

APPLICATIONS:Trico E and EE multiple feed oilers are used to lubricate bearings, chains, andother machinery parts when feed rate adjustment is desired at the dispenser. Thisallows for easy adjustment when the manifold or lubrication point is located in adifficult to reach spot. With up to 6 outlets, these oilers are also used inapplications where multiple point lubrication is required from one reservoir of oil.With heavy wall acrylic or heat resistant glass reservoirs, and all brass construction,they operate in a wide range of applications.

In applications requiring automatic control of the oiler, solenoid versions are available.


DesignatorBCD

SOLENOID VOLTAGE


HOW TO ORDER: Add the number of outlets (up to6) to the model number. On solenoid versions, add a “B”,“C”, or “D” from chart above.

ACCESSORIES: Type S applicator brackets are orderedseparately and shown on page 45.

Applicators are ordered separately and are shown on page 46.

36004-4 36012-4-B


Reservoir

GasketPacking GlandMaterialFinish

Solenoid

Sight Needle Valve



Buna-NGraphiteBrassLacquered Satin Finish

Stainless Steel Plunger and BrassBody UL/CSA Listed

Brass

SPECIFICATIONSA

B

Model No.

36010360123601436016

-

3601136013360153601736019

3-1/83-5/84-7/165-11/165-11/16

BGlassMounting

StudCapacityDimensions (in.)

A

SELECTION CHART - EE

4-1/165-3/166-3/168-5/1613-5/16

10 oz.1 pt.1 qt.

2.5 qt.1 gal.

3/4-163/4-163/4-163/4-163/4-16


Acrylic

4 5/8

11/16

E

11/16

EE

FEATURES:• Toggle shut-off (E model) provides easy to use manual control.

• Solenoid version (EE model) allows machine interface for maximum versatility.

• 3/4-16 mounting stud and 1/4 in. tubing connector simplifies installation tocustomer supplied bracket.

• Acrylic reservoirs are heavy wall design for service to 165ºF. Heat resistant glassreservoirs operate in temperatures to 250ºF.



4444V Series Valves& VM ManifoldsV Series Valves& VM Manifolds

301713017230173301743017530176

Dimensions (in.)

30271

3027230273302743027530276

22-11/163-3/84-1/164-3/45-7/16

B CMounting

StudNo. of Valve

OutletsModel No.

A5/8

31/321-5/161-21/32

25/8

-----

3-7/16

1

23456

1/4-201/4-201/4-201/4-201/4-201/4-20

1/4 Tube Connector Furnished.

AcrylicGlass

APPLICATIONS:V series valves are used with full flow dispensers where feed rateadjustment is desired at the point of lubrication.

VM series manifolds are used with full flow dispensers and allowTrico applicators to be mounted directly to them. With adjustableadapters and integral needle valves, these manifolds allow easy setting at the point of lubrication.

355813558235583355843558535586

Model No.

355913559235593355943559535596

--46810

GlassMounting

StudNo. of ValvesDimensions (in.)

A

SELECTION CHART - VM MANIFOLDS

123456

1/4-201/4-201/4-201/4-201/4-201/4-20

1/4 Tube Connector Furnished

Acrylic


Oil Sight

GasketPacking GlandMaterialFinishNeedle Valve



Buna-NGraphiteBrassLacquered Satin FinishBrass

SPECIFICATIONS

35584 30176

SELECTION CHART -V SERIES VALVES

B

A

258 25

8

1116

A

C BA

BB

A

A

C

2 5/8 2 5/8

11/16

2 1/8

22

3 3/4 + 1/4

VM

VV

FEATURES:• Horizontal design of needle valve minimizes

contamination at the valve seat.

• V series valves and VM manifolds have 1 to 6 outlets.

• Clean out plugs provide easy cleaning when required.

• Heavy wall acrylic or heat resistant glass sights allow easy setting of the desired drip rate.


Adapter allows

adjustment for wear

and height.

4545ST Series Valves /S Series ApplicatorST Series Valves /

S Series Applicator

APPLICATIONS:ST series valves are usedwith full flow dispenserswhere feed rate adjustmentis desired at the point oflubrication. When variable operatingconditions require frequent adjustment, thelarge, knurled knobsimplifies setting thedesired feed rate.

Sight PositionConnection

(NPT)

32391323923239332394

32395323963239732398

1/81/41/81/4

OutGlass

Model No.

In

SELECTION CHART

1/81/4

1/81/4

ParallelParallel

Right AngleRight Angle

Plastic

32404

FEATURES:• Horizontal design of needle valve

minimizes contamination at thevalve seat.

• Double female or double malethreads simplify installation.

• Heavy wall polycarbonate or heatresistant glass sights allow easysetting of the desired drip rate.

• Silver brazing of all brassconstruction provides long life andleak proof design.

• Clear lacquer finish of brasscomponents resists corrosion.

Double Male

ST Double Female(Parallel Sight Shown)

ST Double Male(Right Angle Sight Shown)

2

2

11/16

11/16

3 1/16

3 1/16

Sight PositionConnection

(NPT)

32401324023240332404

32405324063240732408

1/81/41/81/4

OutGlass

Model No.

In

SELECTION CHART

1/81/41/81/4

ParallelParallel

Right AngleRight Angle

Plastic

Double Female

7/16


Oil Sight

GasketPacking GlandMaterialFinishNeedle Valve

220ºF Continuous

Heavy Wall Heat Resistant GlassHigh Impact Strength Polycarbonate Plastic

Buna-NSelf Lubricating Buna-NBrassLacquered Satin FinishBrass

SPECIFICATIONS

2 1/4

2 1/8

+–

S SERIES APPLICATOR BRACKETS

36024

2 + 1/4

2 1/8

36024

APPLICATIONS:S series applicator brackets provide an easy way to mount Trico applicators in remote mounting applications. These brackets are used with full flow dispensers.

FEATURES:• Rigid steel extrusion, nickel plated

for durable installation.

• Mounting hole and 1/4 in. tubingconnector simplifies installation.

• Adjustable for brush wear.1

Mounting HoleDiameter (in.)

Model No. Gang

17/64

SELECTION CHART

Adapter allows

adjustment for wear

and height.

4646 ApplicatorsApplicators

APPLICATIONS:The unique internal reservoir design of these applicatorsallow uniform dispensing of oil for chain lubrication. Theyare capable of handling a wide viscosity range of oils.

Stainless steel models provide long life and excellent cleaningcapability in harsh environments.

Nylon and stainless steel models rated to 160ºF.

APPLICATIONS:Patented Ever-Last applicators use four part construction toprovide long life in the most demanding applications. Usingordinary shears, they may be trimmed to fit the exact size ofchain and eliminate uneven wear of the applicator or sidedripping of the lubricant. Using a neoprene cover and feltplate, the mechanical motion of the chain movement sets upa pumping action in the applicator.Temperature rating of 200ºF.

EVEN-FLO® APPLICATORS

Bristle TypeNylon

Stainless SteelNylon

Stainless Steel

Size (in.)5/85/811

Model No.36039360423604536048

1/8 NPT connections.SELECTION CHART

Reservoir

Insert

Bristle

1/8" NPT

ApplicatorShell

OilFlow

2516

114

2516

2

1/8 NPT

2

2

516

Bristle TypeNylon

Stainless Steel1/8 NPT connections.

Model No.3605136054

SELECTION CHART

Model No.3609036093

Description3˝ Nylon Rotary Brush (1 pair)3˝ Stainless Steel Rotary Brush (1 pair)

REPLACEMENTS: BRUSHES

REMOTE ROTARY BRACKET FOR 1/4˝ TUBE

REMOTE ROTARYBRACKET/VALVE ASSEMBLY

ROTARY BRACKET ASSEMBLY WITH MOUNTING STUD

Model No.36072

36075

Bristle TypeNylon

Stainless Steel

Bristle TypeNylon

Stainless Steel

Model No.36078

36081

Bristle TypeNylon

Stainless Steel

5/16-18 MOUNTING STUD

5/16 MOUNTING HOLE

ACCEPTS 1/4 O.D. TUBE 5/16-18

MOUNTING STUD 5/16 MOUNTING HOLE

ACCEPTS 1/4 O.D. TUBE

5/16 MOUNTINGHOLE

3

3

33/4

3/4

3/4

1/2

1/2

1/2

3 1/4 3 1/43 3/4

3/4

Model No.36084

36087

EVER-LAST® APPLICATORS

Width (in.)1-1/4

2

Model No.3603336036

1/8 NPT connections.

SELECTION CHART

APPLICATIONS:Trico round brushes are used in applications requiring broad contact surfacesfor lubricating and cleaning. They offer even oil distribution on the wearing

points of chain.Stainless steel models provide long life and excellentcleaning capability in harsh environments.Nylon and stainless steel models rated to 160ºF.

ROUND BRUSH APPLICATORS

58

25162

1

516

APPLICATIONS:Trico rotary applicators are used to lubricate and clean chains. Available with a 3 inch nylon or stainless steel rotary brush, they provide chain driven cleaning or lubricating at the speed of the chain. They may be mounted in any orientation to thechain, but when located under the chain they are only used for cleaning.Nylon brushes rated for temperatures to 250ºF and stainless steel models rated to 400ºF.

ROTARY APPLICATORS

4747Introduction to

Grease LubricationIntroduction to

Grease Lubrication

GREASE BASICS:Grease is a dispersion of solid or semi solid additives, sometimes called soaps or thickeners. The purpose of grease is to lubricatemoving parts while the thickener acts as a sponge, under pressure, to release the base fluid when needed.

Typically, greases are used when oil cannot adequately stay in place due to design considerations. They may also be used when it isdesirable to seal out contaminants, prevent lubricant squeeze out, and resist high temperatures.

There are several methods of applying grease to the point of lubrication. The most common forms are manual, single point, andautomatic/centralized lubrication. Trico offers single point lubricators.

TYPES OF SINGLE POINT LUBRICATORS (SPL):Single point lubricators are a storage device designed to slowly dispense grease to the point of lubrication, typically a bearing, over aperiod of time. These devices are usually mounted in the port that a Zerk fitting occupies. They may be driven mechanically,electrically, pneumatically or by a chemical reaction process. Typically, the user sets the dispense rate to meet the requirements of thebearing based upon its size, type, speed, and orientation.

Trico offers three different types of single point grease lubricators.

• Mechanical - Spring loaded that drives a plunger to feed grease.

• Electro-Chemical - A battery operated timer activates an electrochemical cell producing expandable gas that generates pressure against a piston.

• Electro-Mechanical - A battery operated timer activates a motor attached through a small gearbox to drive a cam that activates a piston pump while ejecting a fixed amount of grease.

WHY USE SINGLE POINT LUBRICATORSWhen selected and used properly, single point grease lubricators can solve maintenance and reliability problems. The following points outline where single point lubricators might be advisable to use:

• To prevent contamination

• An alternative to manual lubrication

• Provides a constant flow of lubricant in small volumes to achieve superior lubrication at low unit cost

• Easy to operate

• Frequent re-lubrication applications

• When there is insufficient staff to ensure proper lubrication

• Cost of automatic lubrication systems can’t be justified

• Difficult access or safety hazard for manual system

Grease lubricator installed on pillow block of a dynomometer.

Grease lubricator installedon a blower fan.

4848Streamliner™

Grease DispensersStreamliner™

Grease Dispensers

Streamliner™ grease dispensers apply a preciseflow of grease to critical machine parts. They are acost-effective alternative to fully integrated lubesystems or manual lubrication. The greasedispensers are ideal for industries where highvolumes of moisture, accelerated temperatures andcontamination are present.

Streamliner grease dispensers are available in avariety of styles, so they can be matched foroptimal performance within any application. Their simplicity in operation insures dependabilityand ease of service.

M Series V Series

GL-M SeriesGL-P Series

Streamliner GL-PMechanical – spring loaded

• Anodized aluminum base resists corrosion and works well inhigh vibration applications

• Clear reservoir for easy viewing of grease levels

• Each unit supplied with three different spring sizes formaximum versatility

Streamliner GL-MMechanical – spring loaded

• Double spring design for more uniform dispensing pressure (+/- 6%)

• External level indicator

• Available in three spring sizes fordifferent force requirements

• Excellent in high vibrationapplications

Max. Operating Temp.Spring Force

Grease CapacityThread Sizes

212°FLight (5 psi), medium (10 psi), and heavy (15 psi) included with each model2-1/2 ounces1/8", 1/4", 3/8", and 1/2" NPT

SPECIFICATIONS - GL-P Series

Spring ForceNPTModel No.

33301333023330333304

Light, medium, andheavy spring included

with each model

1/81/43/81/2

PART NUMBERS - GL-P Series

Max. Operating Temp.Spring Force

Thread SizesGrease Capacity

250°FLight, medium, and heavy sold individually as separate units1/8" and 1/4" NPT2-1/4 ounce

SPECIFICATIONS - GL-M Series

Spring ForceNPTModel No.

333213332233323333243332533326

Light (5 psi)Medium (10 psi)Heavy (15 psi)Light (5 psi)Medium (10 psi)Heavy (15 psi)

1/8

1/4

PART NUMBERS - GL-M Series

• Refillable• Versatile

• Refillable• Dual spring

design

4949Streamliner MVariable feed rate with electro-mechanical drive

• Easy to read LCD display

• Microprocessor control

• High operating pressure of280 psi for contaminationremoval and multi-pointlubrication

• Easily changes from 125cc to 250cc reservoir capacity

• Multi-point lubrication capability – up to four points

• Six variable dispensing rates – half, 1, 2, 3, 6, and 12 months

• Anti-vibration, break-free design

• Unit can bedeactivated andadjusted as necessary

• CE and UL approved

Streamliner™Grease Dispensers

Streamliner™Grease Dispensers

Streamliner VVariable feed rate with electro-chemical drive

• Pre-filled with one of five standard grease types

• Microprocessor control

• Large LCD display

• Six variable dispensing rates– 1, 2, 3, 6, 12 months,and purge

• Auto purge cut-out

• Economical 250cc reservoircapacity for fewer replacementsand less disposal

• Indication of operation with green LED

• Transparent reservoir for easy viewing of grease level

• Unit can be deactivated and adjusted as necessary

ACCESSORIES: Accessory items are available for remote and multi-point installations, please visit our website for accessory items.

*OEM filling is available. For specific terms and conditions, please contact Trico Mfg. Corp.

Grease Type Description

Multi-Purpose

Heavy-Duty

High Speed

Food Grade

High Temp.

Multi-purpose grease for applications with low to moderatelyhigh temperatures or loads.

High performance grease for heavy-duty applications, goodanti-wear and high load carrying capacity.

High performance grease specially designed for high-speedapplications above 3,000 rpm.

USDA H1 classification high performance aluminumcomplex grease for food applications.

Fully synthetic high performance grease for extremetemperature applications.

Grease Selection *For Streamliner V and M versions only

NLGI#2

2

2

1

2

Operating Temp.Max. Working PressureDispensing RatesGrease CapacityThread SizeAnti-Explosive Certi Grade

-4ºF to 140ºF80 psi1, 2, 3, 6, 12 months, and purge250cc3/8" NPTEx ia I/II B T6

SPECIFICATIONS - V Series

Model No. Grease Type

3334033341333423334333344

MultipurposeHeavy DutyHigh SpeedFood GradeHigh Temperature

PART NUMBERS - V Series

10

Units/Case

Model No. Grease Type

33349333503335133352333533335633357333583335933360

MultipurposeHeavy DutyHigh SpeedFood GradeHigh TemperatureMultipurposeHeavy DutyHigh SpeedFood GradeHigh Temperature

SERVICE PACK *For Streamliner M versions only

20

Units/CaseCapacity

125cc

250cc

Grease Pouch Capacity*Power Supply*Max. Operating PressureNormal Operating PressureOperating TemperatureDispensing RatesLube CycleDispensing VolumeDispensing Accuracy

125cc and 250cc (replaceable)DC 4.5 V (replaceable)800 psi280 psi-4°F to 140°FHalf, 1, 2, 3, 6, and 12 monthsApprox. 20 seconds/stroke.33 +/- .01 gram/stroke @ 68°F+/- 3% @ 68°F

SPECIFICATIONS - M Series

*Grease pouch and power supply are replaceable in onepackage (Service Pack).

*Grease pouch and battery pack soldseparately as Service Pack.

Model No. NPT

33347*33348*

PART NUMBERS - M Series

8

Units/CaseCapacity

125cc250cc

3/8

• High Pressure• Modular reservoir capacity

• Multi-point lubrication• Refillable

• Immediate stop/start

• Inert gas generation• Economical reservoir capacity

• Immediate start/stop• Disposable

5050Introduction to

Central LubricationIntroduction to

Central Lubrication

Single Line Resistance Systems - Trico central lubricationproducts are commonly known as Single Line Resistance Systems.They are used throughout industry where reliable oil lubricationis required. The basic principles of these systems are:

• Oil lubrication.

• Pump operation to deliver the oil to the system.

• Individual control of oil lubrication amounts at eachlubrication point.

• Meter and control units create resistance to flow to apportionoil delivery.

• Total loss or re-circulating systems.

Common applications are shown below. These are found on punchpresses, milling machines, printing presses, injection moldingmachines, textile machinery, and all types of machine tools.

Ball Bearings Plain Bearings

Flat Slides Cylindrical Slides

Ball Bearing Slides Cams

Gears Chains

Positive Displacement Injection Systems – Trico offers a line of products that complement the single line resistance systems.Instead of using meter or control units, a piston dispenses a pre-set amount of oil at each cycle of the pump. These systems do require that different pumps be used than with single lineresistance systems. All fittings and tubings are interchangeablebetween the two systems.

5151Basic Types of SystemsBasic Types of Systems

CONTINUOUS PUMPSFor large lubrication requirements a continuous system should be used. These systems are commonly used on equipmentwith a high number of lubrication points.

AUTOMATIC CYCLIC PUMPSFor those who need automatic lubricationon an intermittent basis, a cyclic system is required. Cost for these systems are economical and vary based on the type of control used to regulate the lube intervaland capacity of the reservoir.

Automatic Cyclic pumps use meter units to apportion the amount of oil at each lubrication point. Refer to page 59 for more information on meter units.

FEATURES:• Spring discharge and gear pumps.

• Adjustable interval timesbetween lubrication.

• Adjustable oil volume outputs.

• Reservoir capacities up to 20 liters.

• Applications with up to 50 lubrication points.

• Used with meter units.

• Total loss systems.

FEATURES:• Gear pump design.

• Constant oil volume outputs.

• Reservoir capacities up to 20 liters.

• Applications with up to 200 lubrication points.

• Used with control units.

• Total loss systems orre-circulating systems.

MANUAL PUMPSThese single-shot systems use a manuallyactuated pump for applications whereinfrequent lubrication is required.

Manual or single-shot pumps use meterunits to apportion the amount of oil at each lubrication point. Refer to page 59 for more information on meter units.

FEATURES:• Low cost, simplified installation

and operation.

• Manual and spring discharge pumps.

• Reservoir capacities to 450 cc.

• Applications with less than 50 points.

• Used with meter units.

• Total loss systems.

Continuous pumps use control units to apportion the amount of oil at each lubrication point. Refer to page 59 for more information on control units.

5252Positive

Displacement InjectorsPositive

Displacement Injectors

APPLICATIONS:Positive Displacement Injectors (PDI’s) are an excellent means of providing oillubrication to machinery. Using a piston principle, the PDI will lubricate individualpoints with specific amounts of oil. There are 6 output sizes to choose from: 0.06,0.10, 0.16, 0.20, 0.30, and 0.50 cc’s per cycle. A typical system will include a pump,any number of PDI’s, and the necessary tubing and fittings.

At the start of the lubrication cycle, the PE-34 or PE-44 Series pump builds pressure.Upon pressure build-up, the PDI’s deliver the pre-set amount of oil. At the end of the lubrication cycle, a pressure unloading valve opens to return linepressure to 0 PSI. This allows the PDI’s to reset for the next cycle.

HOW TO ORDER:1. For each lubrication point, select the appropriate Positive

Displacement Injector (PDI) based on the oil output per cycle.

2. Select the manifolds required for mounting thatsimplify installation.

3. Select either a PE-34 Series Automatic Cyclic pump with built-in cycle controls, or a PE-44 Series standard pump that usesexternal controls for the lubrication cycle. A choice of reservoircapacities is available for both pumps.

No. of OutletsModel No.

PDM-42PDM-43PDM-44PDM-45PDM-46

MANIFOLDSSELECTION CHART

A

Dimensions (mm)

47627792107

B3752678297

23456

88

5.8 (2)

15

Manifold

1/8 BSPTInlet – 2 places

1/8 BSPT Outlet Thread

PDI

M8 x 1.0 Thread

A

15

B

(Note: All dimensions are mm.)

MANIFOLD SPECIFICATIONS

Inlet Outlet

22 to 6

Connection Port1/8 BSPT1/8 BSPT

Thread Size No. of Ports

PDI SPECIFICATIONS Inlet Thread SizeOutlet Thread SizeOperating PressurePump RequiredOil Viscosity

1/8 BSPTM8 x 1.0200 PSIPE-34 or PE-4430-250 CST (150-1250 SUS)

Output Volume(cc/cycle)

Model No.

PDI-06PDI-10PDI-16PDI-20PDI-30PDI-50

PDI SELECTIONCHART

0.060.100.160.200.300.50

5353Pumps for PDI SystemsPumps for PDI Systems

CROSSREFERENCE For a complete guide to cross-reference

competitive products contact Trico and request publication No. 60138.

Pump TypeModel No.ReservoirCapacity(liters)

PUMPSELECTION CHART

3682036820

PE-3403PE-3406PE-3408PE-3420PE-4403PE-4406PE-4408PE-4420

OilDelivery

TimeInterval Time

Between Cycles

Auto-Cyclicwith Integral

DigitalControls

StandardPump for User

InstalledControls

1-999 sec.

UserInstalled

1-999 minutes

User Installed

170227190

275

290 (6L)310 (8L)470 (20L)

355 (6L & 8L)480 (20L)

338 (6L & 8L)457 (20L)

95 (6L & 8L)190 (20L)

188 (6L)201 (8L)234 (20L)


6, 8 and 20 Liter Reservoirs

3 Liter Reservoir

PUMP SPECIFICATIONS

Motor Voltage

Pump TypeMaximum PressureMaximum FlowOutput ConnectionSealsOil Viscosity

PE-34 and PE-44 Series

110-1-50/60 Standard220-1-50/60 Optional

Gear Pump200 PSI100 cc/min5/16-24 (f )Buna-N30-250 CST (150-1250 SUS)

5454PM-10 & 20 Series

Manual Cyclic PumpsPM-10 & 20 Series

Manual Cyclic Pumps

PM-20 Series

APPLICATIONS:PM series pumps are used in applications where a fixed outputof lubricant is desired. With the PM-10 series, the leverage ofthe pump handle enables the unit to deliver a higher pressurethan most models, providing the ability to lubricate points having some back pressure. With the PM-20 series, lubricantoutput takes place upon release of the handle using spring discharge to assure the correct amount of lubricant is applied.These pumps are commonly used with meter units (pg. 59) insingle or multiple point applications. Common applicationsinclude punch presses and milling machines where infrequentbut reliable lubrication is required.

FEATURES:• Aluminum die cast reservoir provides long life.

• Outputs to 6 or 8 cc/stroke.

• Sight gauge provides liquid level observation.

• Large fill port for easy adding of lubricant.

• Convenient drop-in filter in fill port keeps oil clean.

Pump TypeModel No.

PM-1000-06

Output cc/stroke

6

PM-1000-08 8

8

8

Pressure(PSI)

200

200

50

50

Capacity(cc)

250

450

550

550

PM-2000-L

PM-2000-R

SELECTION CHART

Reservoir Material

Pump Type

Output ConnectionSealsOperating Temperature

Cast Aluminum

PM-10 Series, Manual Piston PumpPM-20 Series, Spring Discharge Piston Pump

5/16-24 (f )Buna-N32-120° F

SPECIFICATIONS

ACCESSORIES: Meter units (pg. 59), and fittings andaccessories (pgs. 60-63) are available.

Vertical Mount

HorizontalMount

PM-10 Series

167 (6 cc)190 (8 cc)

110126

80

86 (6 cc)110 (8 cc)

100 (6 cc)120 (8 cc)

130 (6 cc)150 (8 cc)

(Note: All dimensions are mm.) CROSSREFERENCE For a complete guide to cross-reference


PM-2000-R PM-1000-06

136

155

5555PE-10 & 12 Series

Automatic Cyclic PumpsPE-10 & 12 Series

Automatic Cyclic Pumps




APPLICATIONS:In heavy duty applications requiring a timed delivery of lubricant,the PE 10 and 12 series automatic cyclic pumps are used. Thesedurable pumps provide long life and trouble-free service. Withvariable lubricant outputs and a choice of cycle times, they offerexcellent versatility in many applications. An adjustment screwwith a calibrated rod simplifies setting the lubricant delivery output. These pumps are used with meter units (pg. 59) in multiple point applications. Common applications include punchpresses, milling machines, and other machine tools.

FEATURES:• Transparent 2 liter reservoir simplifies viewing oil level.

• PE 12 series provided with low level switch to signal whenlubricant level is low.

• Adjustable output range of 3 to 6 cc/cycle, or 3 to120 cc/hour.

• Large fill plug simplifies adding or changing lubricant.

• Convenient drop-in filter in fill port keeps oil clean.

Output(cc/cycle)Model No.

PE-1002-03PE-1002-05PE-1002-10PE-1002-15PE-1002-30PE-1002-60PE-1202-03PE-1202-05PE-1202-10PE-1202-15PE-1202-30PE-1202-60

Interval TimeBetween Cycles

(min.)

SELECTION CHART

Reservoir Capacity

Motor Voltage

Pump TypeMaximum PressureOutput ConnectionSealsOperating Temperature

2 Liters


Spring Discharge Piston Pump40 PSI5/16-24 (f )Buna-N32-120° F

SPECIFICATIONS

35101530603510153060

MinimumOutput

(cc/hour)60361812636036181263

MaximumOutput

(cc/hour)120723624126

120723624126

Low LevelSwitch

Add “-220” to model number for 220 volt motor.

ACCESSORIES: Meter units (pg. 59), and fittingsand accessories (pgs. 60-63) are available.

No

Yes

Adjustable3-6

PE-1002-05

200175

235

130

Helpful Tip:For assistance on designing acentral lubrication system, visitour website at www.tricomfg.com/worksheet-central_lubrication.asp

Helpful Tip:

5656PE-20, 22, & 24 Series

Automatic Cyclic PumpsPE-20, 22, & 24 Series


APPLICATIONS:The PE-20 series pumps are designed for automatic cyclic systemswith fewer than 50 points. These pumps are ideal for punch presses and machine tools where small and consistent amounts oflubricant are required. These pumps are used with meter units (pg. 59) in multiple point applications.

Output Model No.

PE-2002-06PE-2002-15PE-2202-06PE-2202-15

PE-2402

Interval TimeBetween Cycles

SELECTION CHART

Reservoir Capacity

Motor Voltage

Pump Type

Maximum Pressure

Output ConnectionSealsOperating Temperature

2 Liters


Gear PumpPE-20, 22 Series: 100 PSIPE-24 Series: 70 PSI5/16-24 (f )Buna-N

32-120° F

SPECIFICATIONS

0 min.to

60 min.

1 min.to

180 min.

MinimumOutput

(cc/hour)

Low LevelSwitch

Low LevelAlarm and

Pressure Gauge

No6 cc/cycle15 cc/cycle6 cc/cycle15 cc/cycle3.33 cc/sec.

Variabledelivery timeof 1-180 sec.

615615

1.1

Add “-220” to model number for 220 volt motor.

ACCESSORIES: Meter units (pg. 59), and fittingsand accessories (pgs. 60-63) are available.

FEATURES:PE-20 Series

• Adjustable interval time between lubrication cycles ofup to 60 minutes.

• Heavy duty plastic reservoir simplifies oil level viewing.

• Choice of 6 cc or 15 cc output per cycle.

PE-22 Series

• Adjustable interval time between lubrication cycles of up to 60 minutes.


• Choice of 6 cc or 15 cc output per cycle.

• Low level switch with alarm.

• Pressure gauge.

PE-24 Series

• Adjustable interval time between lubrication cycles ofup to 180 minutes.


• Adjustable output cycle time of 1-180 sec., flow rate of200 cc/min.

• Low level switch with alarm.

• Pressure gauge.

YesYes

172

225

167

245

130

100


PE-2002-15 PE-2202-06 PE-2402



* Note: Inerval time must be 5 times lubricating time and at least 3 minutes.

5757PE-30 & PE-32 Series

Automatic Cyclic PumpsPE-30 & PE-32 Series


APPLICATIONS:The PE-30 & PE-32 series are the most versatile automatic cyclicpumps available. Both the lubricant dispensing time, and the timeinterval between cycles is digitally controlled. With reservoir sizes upto 20 liters, these pumps can handle systems with up to 100lubrication points. Applications include large printing presses andinjection molding machines. These pumps are used with meter units(pg. 59) in multiple point applications.

ReservoirCapacity(liters)

Model No.


ReservoirMaterial

SELECTION CHART

Reservoir Capacity

Motor Voltage

Pump Type

Maximum Pressure

Output Connection

Seals

Operating Temperature

3 Liter Plastic6, 8, and 20 Liter Steel


Gear Pump

100 PSI - PE-30 140 PSI - PE-32

5/16-24 (f )

Buna-N

32-120° F

SPECIFICATIONS

Plastic

Output Interval Time*Between Cycles

MinimumOutput

(cc/hour)

.2

3682036820

3.33 cc/sec.Variable

delivery timeof 1-180 sec.

Add “-220” to model number for 220 volt motor.Note: Interval time must be 5 times lubricating time and at least 3 minutes.

FEATURES:PE-30 & PE-32 Series• Low level switch with alarm• Pressure gauge• Heavy duty plastic reservoir (3 liter) simplifies oil level

viewing. Metal reservoirs available in 6, 8, and 20 litersfor larger systems.

PE-30 Series• Adjustable output cycle time of 1-180 seconds,

flow rate of 200 cc/min• Adjustable interval time between lubrication cycles

of 3-999 minutes.PE-32 Series• Adjustable output cycle time of 1-999 seconds,

flow rate of 250 cc/min.• Adjustable interval time between lubrication cycles

of 3-999 minutes.• Pressure adjustment valve.• Pressure switch, with reset button, shuts down pumps if

system pressure drops below set level, protecting againstline or component failure.

3-999 minutes

ACCESSORIES: Meter units (pg. 59), and fittingsand accessories (pgs.60-63) are available.

PE-3003

170225195

275

290 (6L)310 (8L)470 (20L)

355 (6L & 8L)457 (20L)

338 (6L & 8L)460 (20L)

95 (6L & 8L)190 (20L)

188 (6L)201 (8L)234 (20L)




6, 8 and 20 Liter Reservoirs

3 Liter Reservoir

PE-3203

Plastic

Metal

Metal

4.17 cc/sec.Variable

delivery timeof 1-999 sec.

5858 PE-40 & PE-50 SeriesContinuous System Pumps

PE-40 & PE-50 SeriesContinuous System Pumps

159 (6L)209 (8L)

328 (6L)357 (8L)515 (20L)

225205

265

140

160

339

259 (6L)291 (8L)388 (20L)


PE-40 and PE-506, 8 and 20 Liter Reservoirs

PE-40 and PE-503 Liter Reservoirs

Model No.(standard)

Model No.*(with returnto tank port)


-PE-4206PE-4208PE-4220

-PE-5206PE-5208PE-5220

ReservoirCapacity(liters)

SELECTION CHART

3682036820

ReservoirMaterial

Output Volume (cc/min)

Plastic

Metal

Plastic

Metal

Add “-220” to model number for 220 volt motor. *Refer to page 63 for accessories on return to tank port pumps.

250

PressureSwitch

Yes

No

Reservoir Capacity

Motor Voltage

Pump Type

Maximum Pressure

Output Connection

Seals

Operating Temperature

3 Liter Plastic6, 8 and 20 Liter Steel110-1-50/60 Standard220-1-50/60 Optional

Gear Pump

140 PSI

5/16-24 (f )

Buna-N

32 - 120° F

SPECIFICATIONS

FEATURES:PE-40 and PE-50 Series

• Standard float switch provides signal when lubricant levelis low.

• Easy view plastic reservoir on 3 liter models, steel reservoir with sight gauge on 6, 8 and 20 liter reservoirs.

• Return to tank port available on 6, 8 and 20 liter models for returning unused oil to reservoir.

• Provided with pressure gauge as standard.• Safety relief valve assures reliable performance.

PE-40 Series

• Pressure switch, with reset button, shuts down pump ifsystem pressure drops below set level, protecting againstline or component failure.

PE-5003PE-4003

APPLICATIONS:Trico’s continuous system pumps are designed for applicationswhere lubrication of critical components is needed on acontinual basis, rather than on a timed basis. Using continuoussystem control units (pg. 59), these pumps provide lubricant at flow rates of 250 cc/min. Common applications includeinjection molding, printing presses, punch presses, and milling machines.

5959Meter & Control UnitsMeter & Control Units

APPLICATIONS:Meter units are usedwith all cyclic systemelectric and manualpumps to provideprecise control of thelubricant to eachlubrication point. Aspring loaded checkvalve keeps air fromentering the systemwhen lubricant is notbeing supplied to themeter unit.

APPLICATIONS:Control units are usedwith all continuoussystem electric pumps toprovide precise control of the lubricantto each lubricationpoint. Because pumpflow is continuous, aninternal check valve isnot required.

METER AND CONTROL UNITS:Trico offers 8 different flow rates for meter units (3/0 - 5) and 10for control units (5/0 - 5). These units are precisely manufacturedto accurately apportion oil at each point. To the left is a chart thatdisplays recommended flow rates for different types of systems. Therelative flow delivery indicates the difference in the flow rates of themeter and control rates. The smallest flow rate is “5/0” and thehighest flow rate is “5”. Each meter and control unit will allowapproximately twice as much flow as the next smaller size, within alubrication system.

5/16-24x

1/8 NPT

1/8 NPTx

1/8 NPT

M8 x 1.0x

M8 x 1.0

M8 x 1.0x

1/8 BSPT

1/8 BSPTx

1/8 BSPT

FlowRate

METER UNITS

3/000012345

DSM-3/0DSM-00DSM-0DSM-1DSM-2DSM-3DSM-4DSM-5

DCM-3/0DCM-00DCM-0DCM-1DCM-2DCM-3DCM-4DCM-5

DTM-3/0DTM-00DTM-0DTM-1DTM-2DTM-3DTM-4DTM-5

-DSM-00MDSM-0MDSM-1MDSM-2MDSM-3MDSM-4MDSM-5M

-DCM-00MDCM-0MDCM-1MDCM-2MDCM-3MDCM-4MDCM-5M

-DTM-00MDTM-0MDTM-1MDTM-2MDTM-3MDTM-4MDTM-5M

5/16-24x

5/16-24

5/16-24x

1/8 NPT

1/8 NPTx

1/8 NPT

M8 x 1.0x

M8 x 1.0

M8 x 1.0x

1/8 BSPT

1/8 BSPTx

1/8 BSPT

FlowRate

CONTROL UNITS

5/04/03/000012345

DSC-5/0DSC-4/0DSC-3/0DSC-00DSC-0DSC-1DSC-2DSC-3DSC-4DSC-5

DCC-5/0DCC-4/0DCC-3/0DCC-00DCC-0DCC-1DCC-2DCC-3DCC-4DCC-5

DTC-5/0DTC-4/0DTC-3/0DTC-00DTC-0DTC-1DTC-2DTC-3DTC-4DTC-5

-----

DSC-1MDSC-2MDSC-3MDSC-4MDSC-5M

-----

DCC-1MDCC-2MDCC-3MDCC-4MDCC-5M

-----

DTC-1MDTC-2MDTC-3MDTC-4MDTC-5M

5/16-24x

5/16-24

FLOW RATE CHART FOR METER AND CONTROL UNITS

5/04/03/000012345

1248163264128256512

Continuous lossContinuous loss

Continuous loss/Cyclic Continuous loss/Cyclic Continuous loss/Cyclic

Cyclic /Continuous re-circulatingCyclic /Continuous re-circulatingCyclic /Continuous re-circulating

Continuous re-circulatingContinuous re-circulating

Relative FlowDelivery Typical System TypeFlow Rate



Inlet

Outlet

CheckValve

Orifice

Orifice

Outlet

Inlet

6060 FittingsFittings

FC-1002FC-1008FC-1000FC-1003FC-1004FC-1005FC-1006FC-1007

FC-1002MFC-1000MFC-1014FC-1015

FC-1010MFC-1017

Male ThreadConnector

Illustration T2T1NewModel No.

FITTINGS

T1

T2

FC-1009FC-1012FC-1018

FC-1009MFC-1013MFC-1012MFC-1011MFC-1014M

Female ThreadConnector

5/16-241/8 NPT1/8 NPTM8 x 1.0M10 x 1.01/8 BSPT1/8 BSPTM14 x 1.5

Illustration T2NewModel No.

5/16-245/16-241/8 NPTM8 x 1.0M10 x 1.0M8 x 1.0M10 x 1.0M14 x 1.5

T1

T2

FM-2001M

FM-2002M

FM-2000

FM-2000M

M8 x 1.0

1/8 BSPT

1/8 NPT

1/8 BSPT

1/8 BSPT

1/8 BSPT

1/8 NPT

1/8 BSPT

Illustration T2T1Model No.

T1

T1

T2

T2

FE-1005FE-1000FE-1012

FE-1000MFE-1001M

90º Elbow

5/16-241/8 NPT1/8 NPTM8 x 1.0M10 x 1.0


5/16-245/16-241/8 NPTM8 x 1.0M10 x 1.0

T1

T1

T2

T2

FE-1002FE-1006FE-1009

FE-1004MFE-1003MFE-1014MFE-1005MFE-1006M

90º Street Elbow

1/8 NPT1/8 NPT

1/4-28 Zerk1/8 BSPT1/8 BSPT1/8 BSPT1/4 BSPT1/4 BSPT


5/16-241/8 NPT1/8 NPTM8 x 1.0M10 x 1.01/8 BSPTM8 x 1.0M10 x 1.0

T1

T2

T1

T2

FE-1007MFE-1011MFE-1010M90º Street Elbow

1/8 BSPTM8 x 1.01/8 BSPT


M8 x 1.0M8 x 1.01/8 BSPT

FE-1007

FE-1013M45º Street Elbow

1/8 NPT

1/8 BSPT


1/8 NPT

1/8 BSPT

FM-2003FM-2004FM-2005Swivel Adapter

(Male thread)

1/8 NPT1/8 NPT1/4 NPT


SWIVEL FITTINGS

1/8 NPSM1/4 NPSM1/4 NPSM

T1 FE-1015FE-1016FE-101790º Elbow

3/8-247/16-247/16-24



5/16-245/16-241/8 NPT1/8 NPT1/8 NPT1/4 NPT1/4 NPT

1/4-28 ZerkM8 x 1.01/8 BSPT1/8 BSPTM8 x 1.01/4 BSPT1/8 BSPT

5/16-241/8 NPT1/8 NPT3/8-247/16-241/8 NPT7/16-24

1/4-28 ZerkM8 x 1.01/8 BSPT1/8 NPT1/8 NPT1/4 BSPT5/16-24

T2

T1 T2

FM-2006FM-2007FM-2008Swivel Adapter

(Female thread)



1/8 NPSM1/4 NPSM3/8 NPSM

T1 T2

T1

6161FittingsFittings

Adapter

Illustration

T1

T2

1/8 NPT1/8 NPT1/8 NPT5/16-24

1/4-28 Zerk1/8 NPT5/16-24

1/4-28 Zerk1/8 BSPTM6 x 1.0M8 x 1.25M10 x 1.51/8 BSPT1/8 BSPT1/4 BSPTM10 x 1.0M8 x 1.01/8 BSPTM8 x 1.0PT 1/4

M6 x 1.0M10 x 1.0M10 x 1.01/8 NPT1/8 NPTM8 x 1.05/16-24

1/8 BSPT

T2T1NewModel No.

FITTINGS

5/16-241/8 NPT1/4 NPT5/16-245/16-243/8-24

1/8 NPT1/8 NPT5/16-241/8 NPT1/8 NPT1/8 NPTM8 x 1.0M10 x 1.0M8 x 1.01/8 BSPT1/8 BSPT1/8 BSPTM10 x 1.0M10 x 1.0M8 x 1.0M8 x 1.0M10 x 1.01/8 BSPTM8 x 1.05/16-24M8 x 1.01/8 NPT

FB-1002FB-1000

FB-1002MFB-1003MFB-1000MFB-1001M

StraightBulkheadConnector

5/16-241/8 NPTM8 x 1.0M10 x 1.01/8 BSPT1/8 BSPT


5/16-245/16-24M8 x 1.0M10 x 1.0M8 x 1.0M10 x 1.0

T1

T2

TubeSize

-TC6-12MTN6-12M

Model No.Illustration Material TubeSize

TB-12TC-12TN-12

Model No.

TUBING - 12 FOOT LENGTHS

BrassCopperNylon

5/32(4mm) 6mm

SizeIllustration Description SizeModel No.

COMPRESSION FITTINGS

Nut

MetalSleeve

NylonHalf-Sleeve

5/16 HexBushing

3/8 HexBushing

FM-3000

FS-1000

FS-1002

FM-1000

FM-1001

M8 x 1.0

6 mm

-

M10 x 1.0

M8 x 1.0

FM-3000M

FS-1004M

-

FM-1002M

FM-1001M

5/32(4mm)

Model No.

5/16-24

FM-1003FM-1004FM-1005FM-1006FM-1007FM-1008

ReducerBushing

1/8 NPT1/4 NPT1/8 NPT1/4 NPT3/8 NPT1/4 NPT


3/8 NPT3/8 NPT1/2 NPT1/2 NPT1/2 NPT3/4 NPT

TB-12 or TC-12Metal Tubing

DCM Meter Unitor

DCC Control Unit

TN-12Plastic Tubing

FM-3000 Nut FM-3000 Nut

FS-1000 Sleeve

5/16-24 Female Threads

FS-1000 Sleeve FM-1000 or FM-1001Bushing


FS-1002 Sleeve

TubingConnections for

Male Threads

TubingConnectionsfor FemaleThreads

FA-1007FA-1008FA-1000FA-1001FA-1009FA-1003FA-1005FA-1004FA-1023FA-1024FA-1025FA-1026

FA-1007MFA-1006MFA-1013MFA-1015MFA-1014MFA-1016MFA-1011MFA-1010MFA-1017MFA-1023MFA-1012MFA-1017FA-1018FA-1020FA-1021FA-1022

T1 T2

6262 Fittings & HosesFittings & Hoses

FM-5000

FM-5001Tee Coupling

Illustration ThreadModel No.

1/8 NPT

1/4 NPT

J-03M

J-04M

J-02M

JS-04MJS-05MJS-06MJS-07MJS-08MJS-09MJS-10MJS-12MJD-04MJD-06MJD-08MJD-10MJD-12M

JH-03M

JH-0402M

Thread SizeMetricModel No.

Illustration

3

4

No. ofPorts Thread SizeModel No.

Inch Threads Metric Threads

JUNCTIONS

2

45678910124681012

3

4

J-03

J-04

J-02

JS-04JS-05JS-06JS-07JS-08JS-09JS-10JS-12JD-04JD-06JD-08JD-10JD-12

JH-03

JH-0402

M8 x 1.05/16-24

1/8 NPT (T1)x

5/16-24 (T2)

1/8 BSPT (T1)

xM8 x 1.0 (T2)

Dimensions (in.)A B

Model No.

HOSES

45678910121416182022242730333640444852566012243648

6789101112141618202224262932353842465054586214263850

H-404H-405H-406H-407H-408H-409H-410H-412H-414H-416H-418H-420H-422H-424H-427H-430H-433H-436H-440H-444H-448H-452H-456H-460H-612H-624H-636H-648

5/32(4 mm)

Diameter

T1

T1

T2

T2 T2

T2

T2



6 mmDiameter

Hose

AB

6363AccessoriesAccessories

Thread Size(T1)

MetricModel No.

Illustration

T1

T1

FlowDirectionTowards

Thread Size(T1)Model No.


CHECK VALVES - 5 PSI

T2

T2

FV-1000

FV-1002

FV-1001

FV-1008

1/8 NPT

1/8 NPT

1/8 NPT

1/8 NPT

Thread Size(T2)

5/16-24

5/16-24

5/16-24

5/16-24

1/8 BSPT1/8 BSPT1/8 BSPT1/8 BSPT1/8 BSPT1/8 BSPT1/8 BSPT1/8 BSPT

M8 x 1.0M10 x 1.0M8 x 1.0M10 x 1.0M8 x 1.0M10 x 1.0M8 x 1.0M10 x 1.0

Thread Size(T2)

FV-1006MFV-1007MFV-1004MFV-1003MFV-1002MFV-1005MFV-1008MFV-1009M

TubeSize

NewModel No.

TUBING CLIPS

5/32(4mm)

6 mm

FT-1001MFT-1004MFT-1006MFT-1003MFT-1005M

12312

Illustration

SizeModel No.Illustration

SizeModel No.


PLUGS

FP-1002

FP-1001

FP-1003

5/16-24

1/8 NPT

5/16-24

FP-1004M

FP-1001MFP-1009M

FP-1003MFP-1006M

M8 x 1.0

1/8 BSPT

M8 x 1.0M10 x 1.0

PressureRangeIllustration Connection

ThreadModel No.

PRESSURE GAUGES

MG-1001

MG-1000

0-35 Bar

0-15 Bar1/8 BSPT

Rear Mount

PressureRange

ConnectionThreadModel No.

MG-1003

MG-1002

0-35 Bar

0-15 Bar1/8 BSPTBottomMount

T2

T2T2

T2

T1

T1

T1

T1

Max.RPMModel No. 1500 RPM

l/min Discharge Capacity

MP-6000 2.5 3.7 l/min.

1800 RPM

1/4NPT

HorsepowerType

OutputPole

Time IntervalRevolution

VoltageFrequency

1/4Fully closed

250W4P

Continuous1400/1700 RPM

110V50/60 Hz

Thread SizeModel No.

1/4 NPTMF-6000

IllustrationITEMS FOR PUMPS WITH RETURN TO TANK PORTSMM-6000Model No.

TheoreticDischargeCapacity(cc/rev)

Max.Pressure(Kgf/cm2)

ThreadSize

5

20 liter8 Liter6 Liter

REPLACEMENT STEEL RESERVOIRS

4.5 l/min.

Filter

1800

Oil Feed Pump

Motor

MR-1006MR-2006

with return totank port

MR-1020MR-2020


MR-1008MR-2008


6464 Technical InformationTechnical Information

VISCOSITY OF OIL LUBRICANTS:Trico pumps are designed to dispense mineral basedlubricants with a viscosity range of 30-250centistokes or 150 - 1200 SUS. New clean oil isalways recommended and users should check withmachine manufacturers for the recommendedlubricant for their equipment.

OIL SELECTION FOR CENTRAL LUBRICATION:Many manufacturers of equipment that use centrallubrication systems will recommend the specificlubricating oil to be used. If a particular oil is notrecommended, then several factors must beconsidered. Load and friction elements of surfacesto be lubricated are a primary consideration. Theambient temperature during machine operation,and also the speed of the equipment are significantfactors. The viscosity of the oil is a measure of howthe oil flows at a given temperature. Both thetemperature and the operating pressure willdetermine the resistance to flow of the oil. As thepressure or temperature increases, the oil deliveryrate is increased.

Always use clean oil in central lubrication systems.Contamination in the oil will significantly shortenthe life of the surfaces being lubricated. Syntheticlubricants tend to be more stable than mineralbased ones. However, some synthetic lubricants canattack standard seal material, and seal compatibilitymust be checked before using any oil type.

To insure the correct choice of lubricating oil,consult the machinery manufacturer or OEM.

TEMPERATURE VISCOSITYRELATIONSHIP

Operating Temp. - ºF

7,000

6,000

5,000

4,000

3,000

2,000

1,000

70 80 90 100

Vis

cosi

ty -S

US

SAE 10

SAE 20

SAE 30SAE 40

SAE 50

SAE 60

SAE 70

1 oz.

1 pt.

1 qt.

1/2 gal.

1 gal.

30 ml./30cc.

.473 liters

.946 liters

1.89 liters

3.785 liters

METRIC CONVERSION CHART

6565Using the

System Design WorksheetUsing the

System Design Worksheet

INSTRUCTIONS - Follow the instructions as listed below using the worksheet on page 67.The worksheet is designed for cyclic systems. For assistance with continuous systems, contact Trico.

STEP 1 - List the lubrication points in the system.In column A, list each lubricant point by description.

STEP 2 - Determine the lubrication required at each point.In column B, write the lubrication delivery required at each point in cc/hr. Enter the total deliveryrequired in the total box. Refer to the specification from the machinery manufacturer whenever possible.The Lubricating Calculations table below can be used as a guide in determining lubrication requirements.

STEP 3 - Determine the flow ratios for each lubrication point.Find the lubrication point requiring the least amount of oil. Divide each of the “Lube Delivery Req’d”values by that amount. Enter these values in column C. This will determine the ratio of lubricationrequired between all of the lubrication points.

LUBRICATING CALCULATIONSIf the amount of lubrication needed is not specified by the equipment manufacturer,this table can be used as a guide.

Ball Bearings

Plain Bearings

Flat Slides

Cylindrical Slides

Ball Bearing Slides

Cams

Gears

Chains

Oil Required in cc/hourIllustration Application

.10 x bearing diameter (in.) x number of rows or bearings.04 x bearing diameter (cm.) x number of rows or bearings

.15 x bearing shaft diameter (in.) x bearing length (in.).023 x bearing shaft diameter (cm.) x bearing length (cm.)

.04 x [slide length (in.) + travel (in.)] x slide width (in.).006 x [slide length (cm.) + travel (cm.)] x slide width (cm.).15 x [slide length (in.) + travel (in.)] x slide diameter (in.)

.023 x [slide length (cm.) + travel (cm.)] x slide diameter (cm.).03 x slide length (in.) x number of slides or rows

.012 x slide length (cm.) x number of slides or rows.08 x surface area (sq. in.)

.013 x surface area (sq. cm.).30 x gear pitch diameter (in.) x face width (in.)

.046 x gear pitch diameter (cm.) x face width (cm.).05 x length of chain (in.) x width (in.)

.008 x length of chain (cm.) x width (cm.)

6666Using the

System Design WorksheetUsing the

System Design Worksheet

2.5

5

10

20

40

80

160

1

2

4

8

16

32

64

00

0

1

2

3

4

5

Chart 1 Chart 2 Chart 3

RatioFrom: To: Multip.

FlowRate

“Q”Value

C D E F

1.00

1.51

3.01

6.01

12.01

24.01

48.01

1.50

3.00

6.00

12.00

24.00

48.00

96.00


FlowRate

“Q”Value

C D E F

1.00

1.51

3.01

6.01

12.01

24.01

1.50

3.00

6.00

12.00

24.00

48.00

1

2

4

8

16

32

0

1

2

3

4

5

5

10

20

40

80

160

SIZING CHARTS1.25

2.50

5

10

20

40

80

160

1

2

4

8

16

32

64

128

3/0

00

0

1

2

3

4

5


FlowRate

“Q”Value

C D E F

1.00

1.51

3.01

6.01

12.01

24.01

48.01

96.01

1.50

3.00

6.00

12.00

24.00

48.00

96.00

192.00

STEP 4 - Determine which of the three sizing charts to use.Find the highest ratio listed in Column C. If the highest value is 48 or less, then use sizing chart 1 in step5. If it is between 49 and 96, then use chart 2 in step 5. If it is between 97 and 192, then use chart 3 instep 5.

STEP 5 - Multiplier, flow rate, and Q value amounts.Referring to Sizing Chart 1, 2, or 3, fill in the appropriate multiplier, flow rate, and Q value for eachlubrication point. Enter the totals for the multipliers and Q values in the total boxes.

STEP 6 - Calculate actual delivery for each lubrication point.To confirm the actual delivery that each lubrication point will receive, the following calculation is done.For each lubrication point, divide the total oil required in the system by the total of all the multipliers.Multiply that number by the multiplier for that lubrication point. Record the amount in column G.

STEP 7 - Check for flowability.Divide the viscosity of the oil (SUS at operating temperature), by the total of all the Q values for thesystem. If the result of that calculation is 61 or less then the system has flowability. If the result is higherthan 61, larger meter units are required. Increase each meter unit flow rate value by one size. Add the newQ values that correspond, and repeat the calculation. Continue to do this until the flowability calculationis 61 or less.

STEP 8 - Select the appropriate pump.Using the pump selection chart on page 68, select a pump best suited for the application.

STEP 9 - Choose the appropriate meter units.Column E has the designated flow rate for each of the meter units. On page 68, select the meter unit withthread configuration best suited for each application point.

6767System Design WorksheetSystem Design Worksheet

Machine:_______________________________________________________________________

Lubricant:_______________________________ Viscosity:__________________ SUS at______ºF Oper. Temp.

Prepared By:_______________________________________________ Date:_________________

LubePointNo.

LubeDelivery

Req’d cc/hr

DeliveryTotal

MultiplierTotal

Q ValueTotal

RatioBetween

Lube PointsMultiplier Flow Rate Q Value

ActualDelivery

cc/hrLubricant Point Description

A B C D E F G

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

16

17

18

19

20

Please visit our website for assistance on designing a central lubrication system at www.tricomfg.com/worksheet-central_lubrication.asp

Helpful Tip:The above worksheet is fordesigning an automatic cyclicsystem. When designing acontinuous system, pleasecontact Trico’s customerservice for assistance.

Helpful Tip:

6868 Product Selection ChartsProduct Selection ChartsPu

mp

Type

s

0 1 2 3 6 12 15 18 24

INSTRUCTIONS - Referring to pages 65-67, find the total oil required for all lubrication points. Select a pump that is in the desired flowrange. Refer to the Trico catalog for information on the specific features of the different pumps.

INSTRUCTIONS - Referringto pages 66-67, find the FlowRate value for each lubricationpoint. This corresponds to theflow rate values in the MeterUnits chart. Select themounting configuration bestsuited for the application.Additional informationregarding the mountingconfiguration is found on theopposite page.

5/16-24x

1/8 NPT

1/8 NPTx

1/8 NPT

M8 x 1.0x

M8 x 1.0

M8 x 1.0x

1/8 BSPT

1/8 BSPTx

1/8 BSPT

FlowRate

METER UNITS

3/000012345

DSM-3/0DSM-00DSM-0DSM-1DSM-2DSM-3DSM-4DSM-5

DCM-3/0DCM-00DCM-0DCM-1DCM-2DCM-3DCM-4DCM-5

DTM-3/0DTM-00DTM-0DTM-1DTM-2DTM-3DTM-4DTM-5

-DSM-00MDSM-0MDSM-1MDSM-2MDSM-3MDSM-4MDSM-5M

-DCM-00MDCM-0MDCM-1MDCM-2MDCM-3MDCM-4MDCM-5M

-DTM-00MDTM-0MDTM-1MDTM-2MDTM-3MDTM-4MDTM-5M

5/16-24x

5/16-24

5/16-24x

1/8 NPT

1/8 NPTx

1/8 NPT

M8 x 1.0x

M8 x 1.0

M8 x 1.0x

1/8 BSPT

1/8 BSPTx

1/8 BSPT

FlowRate

CONTROL UNITS

SELECTION CHART FOR AUTOMATIC CYCLIC PUMPS

5/04/03/000012345

DSC-5/0DSC-4/0DSC-3/0DSC-00DSC-0DSC-1DSC-2DSC-3DSC-4DSC-5

DCC-5/0DCC-4/0DCC-3/0DCC-00DCC-0DCC-1DCC-2DCC-3DCC-4DCC-5

DTC-5/0DTC-4/0DTC-3/0DTC-00DTC-0DTC-1DTC-2DTC-3DTC-4DTC-5

-----

DSC-1MDSC-2MDSC-3MDSC-4MDSC-5M

-----

DCC-1MDCC-2MDCC-3MDCC-4MDCC-5M

-----

DTC-1MDTC-2MDTC-3MDTC-4MDTC-5M

5/16-24x

5/16-24

PE-3003, PE-3006, PE-3008, PE-3020, PE-3203, PE-3206, PE-3208, PE-3220

PE-2402

PE-2002-15PE-2202-15

PE-2002-06PE-2202-06

PE-1002-03PE-1202-03

PE-1002-5PE-1202-5

PE-1002-10PE-1202-10

PE-1002-15PE-1202-15

PE-1002-30PE-1202-30

PE-1002-60PE-1202-60

FLOW

DIRECTION

FLOW

DIRECTION

6969Distribution Network DesignDistribution Network Design

Selecting the distribution network components begins with a sketch or layout of the system. Hardware will be different when thelubrication points are some distance apart or are close together. Many systems will be combinations of distant and close lubricationpoints. The general sequence is A) Select the pump location B) determine how your meter units or control units will mount at eachpoint and C) develop interconnecting plumbing.

A. Pump LocationSeveral key considerations are:1. Install the pump to be visible to the machine operator or maintenance person. This will simplify checking lubricant levels.2. Make sure that there is easy access for refilling the reservoir.3. Access to electricity for automatic pumps should be convenient and safe.4. Generally, the pump is mounted lower than the majority of the points being lubricated to avoid trapped air.

B. Meter Unit or Control Unit InstallationThere are three mounting options to choose from in both meter units and control units.1. Direct MountingIn these applications, the meter or control unit is connected directly to the lubrication point and a single line is connected to it (fig. 1).One end of the meter or control unit is NPT or BSPT and the other end is a 5/16-24 or metric straight thread.

2. Tee MountingIn these applications, the meter or control unit is connected directly to the lubrication point and a junction is connected on the otherend (fig. 2). Both ends of the meter or control unit are NPT or BSPT.


DCM Meter Unitor

DCC Control Unit

DTM Meter Unitor

DTC Control Unit

NPT

NPT

TN-12Plastic Tubing

FM-3000 Nut FM-3000 Nut

FS-1000 Sleeve FS-1002 Sleeve

JH Series Junction

Figure 1

Figure 2

5/16-24

NPT

7070 Distribution Network DesignDistribution Network Design

3. Remote MountingIn these applications, the meter or control unit is not connected to the lubrication point. One end of the meter or control unit isconnected to a junction, and the other end is connected to tubing that goes to the lubrication point (fig. 3). Both ends of the meter orcontrol unit are 5/16-24 or metric straight threads.

C. Interconnecting Plumbing There are several considerations to make when connecting a central lubrication system.1. Tubing Type - Metal or plastic tubing are the 2 choices available. When using metal tubing, copper tubing is the easiest to install.

Steel is stronger, but more difficult to install.2. Hoses - When connecting lubrication points that move, the use of a hose is recommended. Allow adequate hose length to prevent

kinking, stretching, or twisting.3. Tubing Fittings - Refer to figures 1, 2, and 3 for examples of how the tubing fittings connect. When connecting tubing to a female

thread, use the FM-1000 series bushings in place of the FM-3000 series nuts (fig. 4).

4. Pressure gauges - Pressure gauges should be installed in central lubrication systems to verify that adequate oil pressure is getting to eachlubricant point. Depending on the size of the system, one or more gauges may be installed at different points. A gauge installed at thefurthest point from the pump is useful in determining if the entire system is receiving adequate oil pressure.

5. Check valves - Check valves are used to hold pressure in a line and prevent dripping and leaking. Meter units contain internal checkvalves, and control units do not need check valves because of the constant flow. Separate check valves can be installed when the meterunit is not located at the point of lubrication. Installing the check valve between the meter unit and the lubricant point will maintainan oil supply in the lubrication line.


TN-12Plastic Tubing

FS-1000 Sleeve FS-1002 Sleeve

J, JD or JS SeriesJunction

FM-3000 NutFM-3000 Nut

Figure 3

5/16-24

5/16-24

5/16-24 Female Threads

FS-1000 Sleeve

FM-1000 or FM-1001Bushing


Figure 4

7171Introduction to Minimum

Quantity LubricationIntroduction to Minimum

Quantity Lubrication

For over a decade, the concept of minimum quantity lubrication, sometimes referred to as “near dry machining”, has been suggested as a means of addressing environmental concerns and occupational hazards associated with airborne mist. In most instances, whencutting fluids are used, an airborne mist is released into the air that eventually falls to shop floors, causing concern for employee healthand safety. By minimizing the use of cutting fluids economical benefits can be achieved; such as reduced costs of lubricant and disposal,as well as machine and workpiece cleaning time.

WHAT IS MINIMUM QUANTITY LUBRICATION?The basic principal of minimum quantity lubrication is the utilization of precision dispensers to apply the smallest amount of lubricant(typical applications use 1 oz. of lubricant in an 8-hour shift) needed to effectively perform the metal cutting operation. Thesedispensers help eliminate friction at the tool chip interface by minimizing the heat that can be generated. Special lubricants, such as Tri-Cool MD-1 and MD-7, are used with these dispensers which are virtually consumed during the machining operation, resulting inresidue-free machine surfaces and work pieces, and the elimination of airborne mist.

BENEFITS OF MINIMUM QUANTITYLUBRICATION:When using minimum quantity lubrication dispensers, the following benefits will be achieved:

• Increased tool life• Increased material removal• Improved tolerances• Improved surface finish• No sump maintenance• Less machine downtime• No coolant disposal costs• Higher resale value of chips• Elimination of airborne mist

Minimum quantity lubrication used during a milling operation. Minimum quantity lubrication used in a tapping workcenter.

Minimum quantity lubrication used on a horizontal saw.

7272 MD-1200 Micro-Drop®MD-1200 Micro-Drop®

SPECIFICATIONSSystem TypeDelivery Lines NozzlesLiquid Flow RangeLiquid ViscosityInlet Air PressureRecommended Air FilterAir ConsumptionAir Inlet FittingSolenoid VoltagesDimensionsReservoir Capacity

Pressure Delivery, Non-Cyclic6 ft. Polyurethane18˝ Loc-Line or 13˝ Copper2-16 Drops/Minute50-200 SUS60-125 PSI40 Micron1.7 CFM/Line1/4 NPT*120V 60Hz7.06˝ H x 10.09˝ W x 7.06˝ D16 oz.

3080130802308033080430805308063080730808

3081330814308153081630817308183081930820


withLoc-LineNozzles

Model No.with

CopperNozzles

1 Line, Manual On/Off2 Line, Manual On/Off

1 Line, Manual On/Off, Control Module2 Line, Manual On/Off, Control Module

1 Line, Solenoid On/Off2 Line, Solenoid On/Off

1 Line, Solenoid On/Off, Control Module2 Line, Solenoid On/Off, Control Module

SELECTION CHART

APPLICATIONS:The MD-1200 Micro-Drop dispenser provides a cost effectivesolution when flood cooling is impractical or unavailable. Whenused in milling, tapping, and sawing applications, the MD-1200dispenses small amounts of Tri-Cool Micro-Drop synthetic orvegetable based lubricant. Compared to flood cooling, there is nocoolant sump to maintain or used coolant to dispose of.The MD-1200 offers higher material removal rates, improved partfinish, longer tool life, and tighter dimensional tolerances.

Solenoid versions allow these units to be interfaced with CNCcontrols or other signaling devices. The pressurized delivery systemof the MD-1200, provides instant on/off performance when usedwith the solenoid control.

Control module versions replace the air and liquid controls at theunit with controls located at the nozzle. This allows the operator toeasily adjust the air and liquid settings in toolroom applications.

* Metric connection port available. Add “-M” to part number for 1/4 BSPTconnection port.

7.06

10.09

7.06

6

30802

Helpful Tip:The MD-1200 Micro-Drop should not be used with a water-soluble coolant. Thesetypes of fluids will damage and clog system components.Trico offers a line of lubricantsthat is ideal for use with the MD-1200. Please see page 82 for Tri-Cool MD-1 and MD-7.

Helpful Tip:

7373MD-1200 Micro-Drop®MD-1200 Micro-Drop®

ControlModule Replacesthe air and liquid controlsat the unit with controls located at thenozzle. When air and liquid adjustments are made frequently, thiscan save operator time and simplifythe work.

.40

2.00

1.25

1.00

10-32 MOUNTING HOLE

ANTI-ROTATION PIN

Copper Nozzles replace the flexible plasticlines in applicationswhere the nozzle position is fixed.Copper nozzles are supplied straight,and are easily bent to the desirednozzle position.

Nozzle Manifold for Band Saws - Model No. 30850This nozzle manifold is designed to improve installations on band saws.The manifold is easily installed to a user supplied mounting bracket, andreplaces either the plastic nozzles or copper nozzles. Benefits to the user aresimplified installation and longer lasting nozzle positioning.

OPTIONS

The MD-1200's anti-siphon valves permitthe nozzles to be mounted in any position.

Typical applications use1 oz. of lubricant in an

8-hour shift.

Independent controls allow for maximumflexibility in adjusting liquid and air flow

for each nozzle.

Simple easy-to-use controls.No confusing timer to set.

Positive pressure design gives instantfluid delivery for faster cycle times.

Relative liquid scale allowsrepeatable set-ups and saves

time in adjusting flow rates fordifferent applications.

High energy nozzle design eliminates fogging for cleanerenvironment and greater chipclearing power, allowing faster

speed and feeds.


20024R

Replacement Nozzle Tip

Nozzle Tip for Plastic or Copper Nozzle

Magnetic Mounting Kit - Model No. 30687 Simplifies mounting when usedin portable applications.

7474Introduction toSpray CoolingIntroduction toSpray Cooling

The need for providing coolant to metal removal operations isreadily accepted in machining industries. Spray cooling providesthe benefits of coolants used in flood applications with the addedperformance of a high velocity air/coolant mixture. It is usedwhere high speed tools and saw blades require powerful chipclearing, and offers coolant application where flood cooling isinadequate. In addition, spray cooling is also used in processes thatgenerate high amounts of heat at the tool chip interface.Delivering a low volume of coolant at a high velocity, spraycooling is able to remove heat as fast as possible, which is criticalin maximizing productivity and quality. Also, it helps keepexpendable tooling costs in line. Trico offers three separate types ofdelivery systems for dispensing a wide range of coolants in manymetal removal processes: siphon, pump, and pressure delivery.

SIPHON DELIVERY SYSTEMS -Siphon type units use the flow of air across an orifice to draw orpull fluid from the reservoir to the nozzle tip. There are no movingparts. These siphon type units cover a range of applications fromlight to moderate with up to six nozzle capability. The use ofmultiple nozzles allows adequate coverage when tool sizes are largeor heat generation is great. Typical locations for use would bemachine shops, tool rooms, prototype areas, or small machiningwork cells. These units are economically priced and can coversecondary machining applications not equipped with coolantcapabilities. Drilling, tapping, milling, turning, sawing, etc. areexamples of applications that can be improved with the varioussiphon units that are offered.

PUMP AND PRESSURE DELIVERY SYSTEMS - For more sophisticated and demanding metal removal processes, or where more than six nozzles are necessary, the pump or pressure type delivery systems are recommended. These are alsorecommended for higher viscosity fluids, up to 1000 SUS. Thepump type uses a mechanical pump to force fluid from thereservoir and the pressure type uses an air pressurized reservoir

to force fluid to the nozzles. With thecoolant being delivered with positivepressure in either case, a wide range ofcoolant stream definition can beattained. From air only to mini-floodstreams, the wide range available foradjustment, allows the user to setdelivery to the specific applicationrequirements. Applications covered bythese systems include dedicatedsecondary machines, transfer lines,conveyors, large capacity tooling,through the tool and machining cells.The multiple nozzle/valve combinationsalso allow for customizing systems

specific to end user applications.

METAL REMOVAL FACTS1. Metal removal methods generate friction. Two types of

friction generate heat:a. External friction, where approximately a third of the heat is

generated, metal to metal contact of the work tool to thework piece

b. Internal friction, where approximately two-thirds of the heatis generated, resistance of metal atoms to movement whenthe metal is deformed in the shear zone

2. There are many variables at the interface of the tool and thework piece that influence the effectiveness of your cut.a. Tool material, tool design, tool size, speed of tool, depth of

cut, feed rate, work piece material, type of operation, type ofequipment, and coolant/lubricant method are just some ofthese variables.

3. Equipment, operation, tooling, material, part quantity,secondary operations, and safety could dictate the methodof cooling/lubricating to use.a. Equipment - flood system ready, compressed airb. Operation - milling, drilling, tapping, sawing, etcc. Tooling - carbide, diamond, ceramics, special coatingsd. Material - brass, aluminum, steel, stainless, plasticse. Part quantity - one to ten, short runs, long runs(cycle time)f. Secondary operations - plating, anodizing,

painting, machiningg. Safety - work piece handling in fixtures or

chucking, work area4. There is no single method that works best in all

metalworking applicationsa. Cutting fluids do one or more of the following functions:

i. Cool the tool, work piece and chipii. Reducing friction by minimizing erosion of the

tool by lubricatingiii. Remove chips from the work areaiv. Protect the work piece, tooling and machine

from corrosion5. The application method needs to apply the fluid properly to

achieve any or all of the above functions economically6. Spindle speed, feed rate and depth of cut can also determine

your methoda. Spindle speed, high, intermediate, low - cool or lubricate

i. High speed requires more coolingii. Intermediate speeds require both cooling and lubricatingiii. Low speeds require more lubricating

b. Feed ratei. Quicker feed rates generate more heat and

requires more coolingii. Slow feed rates require more lubricating

c. Depth of cuti. Chip evacuation, cooling and lubricating required

Spray cooling duringmilling operation.

7575DL & DL MagnumDL & DL Magnum

APPLICATIONS:The DL and DL Magnum spray cooling systems provide cooling solutions for light duty machining and tool room applications. Thesedispensers are easy to install requiring only shop air and dropping the siphon line into a coolant tank.

FEATURES:DL

• Siphon delivery system.

• 7 in. flexible segmented nozzle.

• Solid brass precision needle valve and body.

• 7 ft. coolant pickup line with stainless steel filter.

• Sturdy 60 lb. magnetic base with mounting arm.

• Assembles in less than five minutes.

DL Magnum

• Siphon delivery system.

• 15 in. heavy duty metal nozzle conduit.

• Advanced nozzle design for increased chip clearing power and reduced overspray.

• Independent air and liquid controls.

• 6 ft. coolant pickup line with stainless steel filter.

• Sturdy 60 lb. mounting magnet.

• Check valve minimizes delay of fluid upon start-up.

• BSPT threads (green model numbers) are available.

306603065530632306333063430635

SELECTION CHARTModel No. Description

DL DispenserDL Dispenser w/ 1 qt. Tri-Cool Coolant

DL Magnum Dispenser, 1/4 NPTDL Magnum Dispenser w/ 1 qt. Tri-Cool Coolant, 1/4 NPT

DL Magnum Dispenser, 1/4 BSPTDL Magnum Dispenser w/ 1 qt. Tri-Cool Coolant, 1/4 BSPT

30633

30660

Valve BodySealsSiphon Line

Filter Element

Fluid Type

Air Inlet PressureAir Inlet Fitting

BrassBuna-N

Polyurethane

40 x 40 MeshStainless Steel

Water based coolants suitable for spray cooling.

50-100 PSI1/8 NPT

Plated BrassBuna-N

Polyurethane

40 x 40 MeshStainless Steel

Water based coolants suitable for spray cooling.

60-120 PSI1/4 NPT or 1/4 BSPT

DL DL Magnum

SPECIFICATIONS

7676 Li’l Mister® SystemsLi’l Mister® Systems

Nozzles

Line Material

3054030541

SELECTION CHART

11

55

PlasticBrass

Model No.Capacity

(qts.)No. ofLines

Line Length (ft.)

11

ACCESSORIES

ReservoirSightValvesSealsDelivery LineCoolant TubeFilter ElementAir Inlet

Air Inlet Pressure

High Density PolyethyleneAcrylic Plastic

BrassBuna-N

5 ft. Brass or PlasticPolyurethane

40 x 40 Mesh Stainless Steel1/4 NPT

50-100 PSI

SPECIFICATIONS

APPLICATIONS:Li’l Mister systems offer spray cooling with features normallyavailable with higher cost units. The compact size with a 1 quartreservoir makes the Li’l Mister ideal for tool room and other lightduty machining applications. Typical applications include drilling,milling, turning, grinding, and tapping.

FEATURES:• Siphon delivery system.

• Easy reading sight gauge.

• 5 ft. plastic or brass armored line.

• Easy mounting bracket.

• Independent air/coolant adjustability.

• One quart reservoir capacity.

• 6 in. straight brass nozzle standard.

• Size - 8 1/2˝ H x 5 1/4˝ W x 4˝ D

Magnetic Nozzle Holders

30 lb. Holder60 lb. Holder165 lb. Holder

304603063030142


Magnetic nozzle holders facilitate the placement and directing of the nozzle.

30541

Straight45º Angled90º Angled

Flexible Loc-Line

30490304913049230493

TypeModel No. Length

6˝

Helpful Tip:The Li’l Mister is designed to be used with a water-solublecoolant. See Tri-Cool TC-1 on page 86.

Helpful Tip:

7777“SST”

Spray Coolant Systems“SST”

Spray Coolant Systems


• Heavy duty 20 gauge, all welded, stainless steel reservoir.

• 1 gallon reservoir capacity.

• Independent air and coolant control for wide delivery range.

• Rugged, one piece molded high density polyethylene cover foreasy filling and cleaning.

• Solid brass fittings.

• 6 in. brass nozzle standard.

• 1 or 2 outlet, 5 ft. plastic lines.

• Includes mounting bracket.

• Size - 8 7/8˝ H x 8 3/8˝ W x 5 5/32˝ D

APPLICATIONS:“SST” coolant systems offer spray cooling with features normallycosting much more. This unit is designed for production typeapplications where less frequent filling is desirable. Quality construction is evident in the heavy duty, stainless steel reservoir.These units can stand alone for portability or be permanentlymounted to any machine application.

ACCESSORIESMagnetic Nozzle Holders


304603063030142



SELECTION CHARTModel No.

3054630547

Capacity (gal.)11

No. of Lines12

Length of Lines (ft.)55

30546

ReservoirCoverValves

SealsDelivery LineCoolant TubeNozzleFilter ElementAir InletAir Inlet Pressure

SPECIFICATIONSType 304 Stainless Steel, 20 gaugeHigh Density PolyethyleneBrassBuna-N5 ft. PlasticPolyurethaneBrass40 x 40 Mesh Stainless Steel1/4 NPT50 - 100 PSI

NozzlesA straight nozzle is supplied as standard. It also may be ordered separately.


Flexible Loc-Line

30490304913049230493


6˝

Helpful Tip:The “SST” coolant system isdesigned to be used with a water-soluble coolant. See Tri-Cool TC-1 on page 86.

Helpful Tip:

7878 Spraymaster®Spraymaster®

APPLICATIONS:Spraymaster systems provide convenient spray cooling in metalcutting. Requiring only compressed air as a power source, theseunits are easily installed in many machining applications.

The Spraymaster is designed for use with Tri-Cool syntheticcoolant. Various mixtures of coolant to water may be used depending upon individual requirements.

Stainless steel reservoir versions are available with the same performance features as the standard Spraymaster.

30542305433054830549

SELECTION CHART

1212

Model No. Reservoir Type Capacity(gals.)

No. ofLines

Line Length (ft.)

SPECIFICATIONSCover

Reservoir

ValvesO-RingsDelivery LineCoolant TubeFittingsFilter ElementAir Inlet

High Density Polyethylene

High Density Polyethylene or 20 Gauge 304 Stainless Steel

BrassBuna-NBrass ArmoredPolyurethaneBrass40X40 Mesh Stainless Steel1/4 NPT

Nozzles


Flexible Loc-Line

30490304913049230493


6˝

Spraymasters are supplied with straight nozzles. Other nozzletypes are available for customer installation.



304603063030142



ACCESSORIES

30542 30548

Stainless Steel

High DensityPolyethylene

1 5


• Air and coolant are independently controlled by solid brassprecision needle valves.

• Brass armored lines are a standard 5 foot length.

• 6 in. straight brass nozzle is designed so atomization takes placeat nozzle tip for enhanced pattern control.

• Mounting brackets included for easy installation.

• 1 or 2 outlet line models provide maximum flexibility.

• Liquid level gauge easily indicates coolant level at a glance.

• Polyethylene dimensions: 12-1/4˝H x 10˝W x 5-1/4˝ D

• Stainless steel dimensions: 9-3/8˝H x 8-3/8˝W x 5-1/4˝D

Helpful Tip:SprayMaster units are designed to be used with a water-soluble coolant.See Tri-Cool TC-1 on page 86.

Helpful Tip:

7979Spraymaster® IISpraymaster® II

APPLICATIONS:The SprayMaster II is designed for applications where the abilityto cycle the delivery is required. Solenoid control of spray coolantallows instant on-off operation for use in fixtured secondarymachining. Solenoid control also conserves on coolant use duringload and unload portion of cycle. This model is available with twolines for maximum coolant delivery or pattern control. TheSpraymaster II can be interfaced with a wide range of signalingdevices for automatic delivery applications.

ACCESSORIES



304603063030142



SELECTION CHART

Model No.3045830459

Capacity (gal.)11

No. of Lines12

Length of Lines (ft.)55

Comes complete with UL and CSA approved 110 volt, 60 Hz powercord. Fused and fully grounded.

30458

SPECIFICATIONSReservoirSightValvesSealsDelivery LineCoolant TubeFilter ElementSolenoidAir InletAir Inlet Pressure

High Density PolyethyleneAcrylic PlasticBrassBuna-N5 ft. Brass ArmoredPolyurethane40 x 40 Mesh Stainless SteelBrass Body & S/S Plunger1/4 NPT50 - 100 PSI

Nozzles

Straight

Flexible Plastic

302603062230623

6˝7˝12˝



• High performance 7 in. flexible segmented plastic nozzle.

• Solenoid control for instantaneous response.

• 1 or 2 outlet, 5 ft. brass armored lines.

• Easy to read coolant sight gauge.

• Easy to mount reservoir bracket for permanent mountingto application.

• Independent air and coolant controls for lean to richspray delivery.

• Size: 12-1/4˝H x 10˝W x 5-1/4˝D

Helpful Tip:SprayMaster II units are designed to be used with a water-solublecoolant. See Tri-Cool TC-1 on page 86.

Helpful Tip:

8080Type “B”

Spray Coolant SystemsType “B”

Spray Coolant Systems

SELECTION CHART

305503055130552305533055430556

123456

Model No.

Reservoir Type

Capacity(gals.)

No. ofLines

Lengthof Lines (ft.)



304603063030142



APPLICATIONS:This system provides spray coolant delivery at up to sixseparate locations. Each line can be individually set for exactdelivery. Independent air and coolant controls enable usersto balance the delivery of coolant to each application. Type Bmodels are suited to applications where multiple cuttinglocations, large diameter tools or higher heat transferrequirements are desired.

30550

ACCESSORIES

5 5


• Large five gallon polyethylene reservoir.

• 1 to 6 outlet, 5 ft. armored brass delivery lines.

• 6 in. straight brass nozzles.

• Independent line control for multiple requirements.

• Independent air and coolant control for a wide range of delivery requirements.

• Reservoir handle for portability.

• Size - 15˝H x 12 3/8˝ Diameter

Nozzles


Flexible Loc-Line

30490304913049230493


6˝

Helpful Tip:Type “B” spray coolant systemsare designed to be used with a water-soluble coolant. See Tri-Cool TC-1 on page 86.

Helpful Tip:

8181Mistmatic®

Coolant Delivery SystemsMistmatic®

Coolant Delivery Systems

APPLICATIONS:The Mistmatic allows the user a wide range of coolant delivery.Variable adjustability allows deliveries such as lean, rich, highvelocity, or low velocity. Unit can fill “mini-flood” applicationswith the dual control valving. This unit can cover most machiningrequirements. Multiple metal removal processes ranging frombroaching to grinding can be covered with the Mistmatic. Thepressure pumping design of the Mistmatic allows use with a widerange of coolants compatible with Buna-N seals and lower than1000 SUS viscosity. Auto electric models can be interfaced withmachine controls for cyclic capabilities.

Straight45º Angled

Straight 45º Angled90º Angled


302503025430251302553025930253302573026130268302673062030621

NozzlesTypeModel No. Length

30604

12˝

SELECTION CHARTModel

No.

3060030601306023060330604306053060630607306083060930610306113061430615

Plastic11441144----14

Stainless--------1111--

ControlMode

ManualManualManualManual

AutoAutoAutoAuto

ManualManual

AutoAuto

ManualManual

*Other voltages on request

No. of Lines

121212121212

Capacity (gal.)

SPECIFICATIONSReservoirSightCheck ValveSealsDelivery LinesCoolant TubeValvesSolenoidNozzlePumpTubingAir InletAir Inlet Pressure

High Density PolyethyleneAcrylic PlasticBrass w/Buna-N SealsBuna-N5 ft. Armored BrassPolyurethaneBrassBrass Body & S/S PlungerFlexible Segmented Plastic StandardAcetal Copolymer w/Buna-NPolyurethane1/4 NPT50 -100 PSI

CustomerSpecified

3˝

6˝

FlexibleMetal

FlexiblePlastic

7˝

12˝

Voltage(VAC)

----

120*120*120*120*

--

120*120*

--

FEATURES:• Pump operated system.

• HV-3100 control valve with 7 in. segmented plastic nozzle.

• One or two outlet, 5 ft. brass armored lines.

• Independently adjusted air and coolant allows for balancing coolant delivery.

• Platform design capabilities allow for flexible line/nozzlecombinations (consult factory).

• Easy reading sight gauge.

• 1 and 4 gallon reservoir capacities.

• Reservoir bracket for easy mounting directly to machining application.

• 1 gallon dimension = 10 1/2˝ H x 8 1/2˝ W x 6˝ D4 gallon dimension = 14 1/2˝ H x 17 1/2˝ W x 9˝ D

8282 Coolant Delivery SystemsCoolant Delivery Systems

APPLICATIONS:

Both the 30034 and 30095 systems cover coolant delivery applications ranging from singlepoint applications to multiple point (up to 100) applications. With the use of a variety ofsignaling devices, custom machining application cooling and lubricating can beaccomplished. With the nozzle/valve designs available, individual machine and tool requirements can be serviced from one platform design tank or pump. The dual controlvalves allow a delivery range from air only, to mini-flood, and a variety of spray streams.Applications ranging from broaching to grinding are covered using these combinations.

FEATURES:

30034 Dispenser

• Pressure delivery system.

• 5 gallon stainless steel ASME certified tank.

• Cam action fill cover cannot be opened when unit is pressurized.

• Large opening for filling.

• Air regulator, gauge, coolant filter, pressure relief valve and twoway shut off valve included.

30095 Pump

• Pump operated system.

• Large capacity delivery capability - up to 100 individual nozzles.

• Pump works on stall pressure as coolant is delivered saving compressed air.

• Pump installs into 2 in. bung in drums or tank allowing quickchangeover of coolant supply.

• Air only needed for operation.

• Air regulator, gauge, coolant filter, quick-disconnects and fittings included.

Control Valves

• Solid brass valve construction.

• Precision needle valves allow for infinite pattern delivery.

• Valve and nozzle design allows for multiple delivery potential.

• Fast acting solenoids allow cyclic application for conservingcoolant and compressed air and maintaining work environment.

• P-12A has built-through feature for simplified installation withother valves.

• HV-2100 has valve controls close to nozzle delivery point.

SELECTION CHARTModel No.

3003430095

Description5 Gallon Dispenser

1:1 Ratio Pump - 2˝ Bung Fitting

30034

30095

8383Coolant Delivery SystemsCoolant Delivery Systems

MaterialCapacitySealsPackingFittingFilterControlsSize

Connections

Air Pressure

SPECIFICATIONS - PUMPS/DISPENSERS30095

Carbon SteelReservoir Size

Viton® and TeflonPolyethylene

51˝ x 10˝

1/4 NPT Quick Coupling Inlet3/8˝ Quick Coupling Outlet

30034Type 304 Stainless Steel

5 gal.Buna-N

_

24 1/2˝ x 9˝

1/4 NPT Quick Coupling Inlet1/4˝ O.D. Tube Outlet

Brass40 x 40 Mesh Stainless Steel

0-100 PSI Regulator and Gauge

50-100 PSI

HOW TO ORDER: Most systems require the following minimumcomponents: dispenser, control valve, fittings, and tubing.

ACCESSORIES: Accessory items such as solenoids, tubing, and clipsfor these systems are shown on page ?.

3024030241302433024830249302563025830112

SELECTION CHARTCONTROL VALVES

Model No. Type Nozzle

3˝ Straight6˝ Straight12˝ Straight

7˝ Flexible Metal12˝ Flexible Metal7˝ Flexible Plastic12˝ Flexible Plastic

4˝ StraightP-12A

HV-2100

30250302513025330254302553025730259302613026730268301253012630127

Type

NozzlesModel No. For Use With Length

(in.)36123612612712

P-12A 4

Straight

45º Angled


90º Angled

FlexibleMetal

HV-2100

55 gallon drum

30095

P-12A

30266

HV-2100

P-12A

P-12A

30112 30241

8484Introduction to

Lubricants & CoolantsIntroduction to

Lubricants & Coolants

Cutting fluids play a significant role in machining operations and impact shop productivity, tool life and quality of work. The primaryfunction of a cutting fluid is temperature control through cooling and lubrication. A fluid’s cooling and lubrication properties are criticalin maximizing productivity and quality, in addition to keeping expendable tooling costs in line. Cooling and lubrication are alsoimportant in achieving the desired size, finish and shape of the workpiece. A secondary function of a cutting fluid is to flush away chipsand metal fines from the tool/workpiece interface. Ultimately, this prevents a finished surface from becoming marred and reduces theoccurrence of a built-up edge.

Typically, cutting fluids are manufactured with the following bases: mineral, vegetable or synthetic. Additives are added to the base oil to achieve specific performance parameters such as corrosion inhibitors, wetting agents, biocides, extreme pressure additives, andemulsifiers. Cutting fluids fall into two categories: water-soluble coolant or lubricant, each containing its’ own unique properties.

Water-soluble coolants are cutting fluids engineered to carry heat away from the tool chip interface. Water is the best coolant agent, but has no lubricating ability and is susceptible to contamination. Water-soluble coolants include base oil along with additives toenhance waters’ ability to disperse heat. They are generally used in high-speed cutting operations such as turning and milling.Lubricants, non-soluble, are used in metal cutting operations to reduce friction. They are used in low-speed cutting operations such as broaching and tapping.

Cutting fluids are widely utilized to optimize the process of machining operations such as turning, drilling, boring, grinding, milling,drawing, stamping, and sawing. The proper selection of a cutting fluid will provide benefits such as extended tool life, increased speedsand feeds, tighter tolerance capability, and improved finish.

Micro-dispenser being filled with Tri-Cool MD-1 lubricant.

8585Tri-Cool® FluidsTri-Cool® Fluids

Tri-Cool fluids are specially formulated to provide superior performance and long service life in various metal cutting operations on ferrous and non-ferrous metals. They have been designed to meet operator safety concerns. Tri-Cool fluids are safe to use, non-toxic, non-allergenic,and contain no harmful chemicals or additives.

• Maximize production rates • Maximize operating costs • Extend machine and tool life • Increase speeds and feeds • Increase productivity

TC-1 WATER-SOLUBLE COOLANTTC-1 is a highly concentrated premium synthetic water-soluble coolant formulated to exceed the demands ofspray and flood cooling. It contains a non-chlorineextreme pressure additive for improved tool and surfacefinish. TC-1 prevents rusting on tool and machinesurfaces, even at lower concentrations. It contains abroad spectrum biocide/fungicide for protection againstbiological growth.TC-1 is non-toxic,non-flammable, non-corrosive, andbiodegradable.

306563065730658

Model No. Size

4 gallon / case5 gallon pail

55 gallon drum

MD-1 MICRO-DROP®VEGETABLE LUBRICANTMD-1 is a pure vegetable based lubricant that can beused in various metal cutting operations to achieveeffective machining productivity on ferrous and non-ferrous metals. MD-1 has a heat stable, non-chlorineextreme pressure additive for improved tool life andsurface finish. MD-1 is low misting, to preventfogging in the shop. It will not stain aluminumrequiring post-heat treating. MD-1 is environmentallysafe and biodegradable.

306593066230663

Model No. Size


55 gallon drum

306483064730646

Model No. Size


55 gallon drum

MD-7 MICRO-DROP®SYNTHETIC LUBRICANTMD-7 is a pure synthetic based lubricant designed foruse in various metal cutting operations. With the use ofa Micro-Dispensing system, more effective machiningproductivity and savings in fluid costs can be achieved,while waste and disposal problems are reduced. MD-7is non-toxic, non-flammable, non-corrosive, and willnot become rancid.

GrindingGeneral MachiningBroach, Tap, Heavy Mach.

40:132:120:1

Operation

SPRAY COOLING

Dilution Ratio

Light MachiningGeneral MachiningHeavy Machining

32:120:110:1

Operation

FLOOD APPLICATION

Dilution Ratio

SUGGESTIVE DILUTION RATIOS

8686 Tri-Cool® FluidsTri-Cool® Fluids

MD-8 MICRO-DROP® SQUEEZEBOTTLELUBRICANTMD-8 is a purevegetable basedlubricant that comesin a convenient fourounce squeeze bottle.The squeeze bottledesign allows formanual application oflubricant to the

cutting tool. It’s great to use where traditionalmethods of application are unavailable. MD-8 isnon-toxic, non-flammable, environmentally safe, andbiodegradable.

30678

Model No. Size

12 four oz. bottles/case

Machining

Material

Application

Fluid Type

Light-DutyGeneralHeavy-DutyFerrousNon-FerrousPlasticsSpray CoolingFloodingMicro-DispensingManual ApplicationWater SolubleSynthetic BasedVegetable Based

TC-1

•••••

••

••

MD-1

••••••

•

•

MD-7

••

••

•

•

MD-8

••

•••

•

•

APPLICATION CHART

Milling(using a 1/2˝ Ø 2flute HSS EM)

Tapping

Band Sawing

Up to 1/16 DOCFrom 1/16 to 1/4 DOCFrom 1/4 to 7/16 DOCUp to 1/4 ØFrom 1/4 Ø to 9/16 ØFrom 9/16 Ø to 1 ØUp to 1 stock ØFrom 1 to 3 stock ØFrom 3 to 4 stock Ø

ParametersProcess MD-1

•••••••••

MD-7

••

••

••

APPLICATION GUIDE (Micro-Dispensing lubricants)All material used for data is 1018 Ø = diameter DOC = depth of cut

TRICO MFG. CORP.1235 Hickory Street, Pewaukee, WI 53072

1-800-558-7008 (USA only)

Phone: (262) 691-9471

FAX: (262) 691-2576

www.tricomfg.com

TRICO MFG. CORP.1235 Hickory Street, Pewaukee, WI 53072

1-800-558-7008 (USA only)

Phone: (262) 691-9471

FAX: (262) 691-2576

www.tricomfg.com

trico product catalog 2005

Documents