triomax catalogue
TRANSCRIPT
Ultimate Cabinet PartnerTrioMax is the epitome of refined elegance,operation simplicity, superior performance and application diversity. Harn's commitment to quality and reliability makes TrioMax the ultimate partner to any cabinet. Its smooth running action and attractive design blend harmoniously with modern homes and kitchens.
Excellent PerformanceStandard load capacity of 50kg caters for most storage requirements. The super smooth sliding action offers effortless opening and closing every time regardless of the drawer's load weight. Full extension design provides clear view and unrestricted access to drawer contents. The ergonomically friendly design makes TrioMax a delight to use.
SylentThe Sylent integrated cushioning system ensures consistent quiet and non-abrupt closing. Sylent automatically adapts to varying closing speed and weight of the drawer to regulate the closing action. Sylent guarantees a flawless performance every time. Room ambiance is maintained without disruption when Sylent is operating. TrioMax is truly a great addition to any room.
OrganiseplusConsumables & perishablesStorage area for consumable and perishable goods are stored here. The stored items may be retrieved for further preparation or consumed directly. Larder units ample in space and well organised will be able to provide access from the front and sides.
Utensils & crockeryThis area is used for storage of cutlery, crockery & glassware. It's an area that is used on a daily basis. The divider panels and lateral dividers helps to neatly organise and prevent slippage in stored items.
Cleaning & waste storageThe cleaning area is frequently used. It's interrelated to all other areas. Storage of cleaning utensils and materials must be easily accessible. Waste storage and related items are usually stored below the sink. A sink pullout unit is an efficient way to make use of storage space.
Preparation & preparation utensilsPreparation area is where all ingredients are prepared for baking or cooking. Oil, sauces and utensils essential for food preparation are stored and can be accessed easily.
Cooking & heavy utensilsHeavy cooking utensils are kept nearby the stove and should be easy gain for use. The full extension design allows for a full view and easy access to the stored contents.
Drawer S Standard Drawer Standard Inner Drawer Drawer Height - 83mm Drawer T Standard Drawer Standard Inner Drawer Drawer Height - 115mm Drawer MS Railing M Standard Drawer Railing M Inner Drawer Drawer Height - 140mm Drawer MT Railing M Standard Drawer Railing M Inner Drawer Drawer Height - 172mm Drawer HS Double Railing H Standard Drawer Double Railing H Inner Drawer Drawer Height - 209mm Drawer HS Side Extend H Standard Drawer Side Extend H Inner Drawer Drawer Height - 209mm Filing System
6
8
10
12
14
16
18
20
22
24
26
28
30
Organiseplus
32
Sink Cabinet
42
Larder Unit
39
44
46 48 49 52 57
Steel Back Accessories Assembly, Removal and Adjustment Jigs and Devices5
TRIOMAX
Standard Drawer - S
Roller bearing concealed runners Full extension with synchro control Steel drawer side 83mm Load capacity of 50kg Quick assembly Flexible 2-dimensional front adjustment Sylent integrated cushioning system Integrated Self-Aligning and Self-Engaging stabiliser4 2 1 3 5
1
Cabinet Profile Left / Right : electro galvanised
2
Drawer Side Left / Right :
Drawer Length 270mm 350mm 400mm 450mm 500mm 550mm 3 TM46.27.EG TM46.35.EG TM46.40.EG TM46.45.EG TM46.50.EG TM46.55.EG TD36.27.XX TD36.35.XX TD36.40.XX TD36.45.XX TD36.50.XX TD36.55.XX
Cover Cap-harn Logo2X RBC.62030-L1.XX
4
Front Fixing Bracket Left / Right :Screw- on 2X Press-in 2X Expansion 2X RBF.21030.NA RBF.22030.NA RBF.23030.NA
5
Rear Fixing Bracket Left / Right :RBR.76030.XX Steel Back see page 48
Colour Code XX Standard : 01 - R9010 White 22 - R9006 Grey Metallic 24 - R7037 Dust Grey Available upon request : 02 - R9001 Cream 21 - R7004 Grey 27 - Anthracite
6
Space Requirements and Front Installation Dimensions
Back Installation Dimensions
34.0 -1.0
+1.0
34.0
For press-in and expansion front fixing brackets to pre-drill 10mm x 12mm
9.0 20
min. 63.5
32
93
min. 33
Bottom panel width + 34mm
17.0
Front overlay
Cabinet Profile Screw Positions
47.5
Cutting Dimensions for 16mm ChipboardBack panel Width = internal cabinet width - 79mm Height = 84mm
Drawer Length270 mm 350 mm 400 mm 450 mm 500 mm 550 mm
Min. internal cabinet depth = drawer length + 3 mm Actual loss of extension = 0 mm
Bottom panel Width = Internal cabinet width - 68mm Length (wooden back) = drawer length - 24 mm Length (steel back) = drawer length - 22 mm
Pre-drilling Dimensions of Bottom Panel for Fixing Euro Screws14 256 96 128 192 224 9 5 37
Drilling Template539
see page 58
352
288
Pre-drill 5mm x 9mm deep
7
32
TRIOMAXInner Drawer - S
Roller bearing concealed runners Full extension with synchro control Steel drawer side 83mm Load capacity of 50kg Quick assembly Sylent integrated cushioning system Integrated Self-Aligning and Self-Engaging stabiliser44
6
5
2
1
3
1
Cabinet Profile Left / Right : electro galvanised
2
Drawer Side Left / Right :
Drawer Length 270mm 350mm 400mm 450mm 500mm 550mm 3 TM46.27.EG TM46.35.EG TM46.40.EG TM46.45.EG TM46.50.EG TM46.55.EG TD36.27.XX TD36.35.XX TD36.40.XX TD36.45.XX TD36.50.XX TD36.55.XX 6
Cover Cap-harn Logo2X RBC.62030-L1.XX
Rear Fixing Bracket Left / Right :RBR.76030.XX Steel Back see page 48
4
Front PanelCabinet Width(16mm side panel)
400mm 450mm 500mm 550mm 600mm 900mm 1000mm 1200mm 5
RPF860.285.XX RPF860.335.XX RPF860.385.XX RPF860.435.XX RPF860.485.XX RPF860.785.XX RPF860.885.XX RPF860.1085.XX
Front Fixing Bracket Left / Right :RBF.56030.XX Included one piece 203.000Colour Code XX Standard : 01 - R9010 White 22 - R9006 Grey Metallic 24 - R7037 Dust Grey Available upon request : 02 - R9001 Cream 21 - R7004 Grey 27 - Anthracite
8
Space Requirements and Front Installation Dimensions
Back Installation Dimensions
34.0 -1.0
+1.0
34.0
min. 103 .5
9.0 20 93
Cabinet Profile Screw Positions
min. 33
Cutting Dimensions for 16mm ChipboardBack panel Width = internal cabinet width - 79mm Height = 84mm
Drawer Length270 mm 350 mm 400 mm 450 mm 500 mm 550 mm
Min. internal cabinet depth = drawer length + 12 mm Actual loss of extension = 9 mm
Bottom panel Width = Internal cabinet width - 68mm Length (wooden back) = drawer length - 24 mm Length (steel back) = drawer length - 22 mm
Pre-drilling Dimensions of Bottom Panel for Fixing Euro Screws32 96 128 192 224 256 288 352 9 14 37 9
Drilling Template53
see page 58
Pre-drill 5mm x 9mm deep
Cutting Dimensions for Front Panel
4
Width = Internal cabinet width - 82mm
9
32
TRIOMAX
Standard Drawer - T
Roller bearing concealed runners Full extension with synchro control Steel drawer side 115mm Load capacity of 50kg Quick assembly Flexible 2-dimensional front adjustment Sylent integrated cushioning system Integrated Self-Aligning and Self-Engaging stabiliser4 5
2 1 3
1
Cabinet Profile Left / Right : electro galvanised
2
Drawer Side Left / Right :
Drawer Length 400mm 450mm 500mm 550mm 3 TM46.40.EG TM46.45.EG TM46.50.EG TM46.55.EG TD38.40.XX TD38.45.XX TD38.50.XX TD38.55.XX
Cover Cap-harn Logo2X RBC.62030-L1.XX
4
Front Fixing Bracket Left / Right :Screw- on 2X Press-in 2X Expansion 2X RBF.21030.NA RBF.22030.NA RBF.23030.NA
5
Rear Fixing Bracket Left / Right :RBR.76830.XX Steel Back see page 48
Colour Code XX Standard : 01 - R9010 White 22 - R9006 Grey Metallic 24 - R7037 Dust Grey Available upon request : 02 - R9001 Cream 21 - R7004 Grey 27 - Anthracite
10
Space Requirements and Front Installation Dimensions
Back Installation Dimensions
34.0 -1.0
+1.0
34.0
For press-in and expantion front fixing brackets to pre-drill 10mm x 12mmmin 95.5
9.0 20
125
32
min 33
Bottom panel width + 34mm
17.0
Front overlay
Cabinet Profile Screw Positions
47.5
Cutting Dimensions for 16mm ChipboardBack panel Width = internal cabinet width - 79mm Height = 116mm
Drawer Length400 mm 450 mm 500 mm 550 mm
Min. internal cabinet depth = drawer length + 3 mm Actual loss of extension = 0 mm
14 256
128 192 224
9
5 37
Bottom panel Width = Internal cabinet width - 68mm Length (wooden back) = drawer length - 24 mm Length (steel back) = drawer length - 22 mm
Pre-drilling Dimensions of Bottom Panel for Fixing Euro ScrewsDrilling Template539 Pre-drill 5mm x 9mm deep
352
288
see page 58
11
32
32
TRIOMAXInner Drawer - T
Roller bearing concealed runners Full extension with synchro control Steel drawer side 115mm Load capacity of 50kg Quick assembly Sylent integrated cushioning system Integrated Self-Aligning and Self-Engaging stabiliser4 5 2 1 3 6
1
Cabinet Profile Left / Right : electro galvanised
2
Drawer Side Left / Right :
Drawer Length 400mm 450mm 500mm 550mm 3 TM46.40.EG TM46.45.EG TM46.50.EG TM46.55.EG TD38.40.XX TD38.45.XX TD38.50.XX TD38.55.XX 6
Cover Cap-harn Logo2X RBC.62030-L1.XX
Rear Fixing Bracket Left / Right :RBR.76830.XX Steel Back see page 48
4
Front PanelCabinet Width(16mm side panel)
400mm 450mm 500mm 550mm 600mm 900mm 1000mm 1200mm 5
RPF860.285.XX RPF860.335.XX RPF860.385.XX RPF860.435.XX RPF860.485.XX RPF860.785.XX RPF860.885.XX RPF860.1085.XX
Front Fixing Bracket Left / Right :RBF.56830.XX Included one piece 203.000Colour Code XX Standard : 01 - R9010 White 22 - R9006 Grey Metallic 24 - R7037 Dust Grey Available upon request : 02 - R9001 Cream 21 - R7004 Grey 27 - Anthracite
12
Space Requirements and Front Installation Dimensions
Back Installation Dimensions
34.0 -1.0
+1.0
34.0
9.0 20min 103 125
Cabinet Profile Screw Positions
min 33
Cutting Dimensions for 16mm ChipboardBack panel Width = internal cabinet width - 79mm Height = 116mm
Drawer Length400 mm 450 mm 500 mm 550 mm
Min. internal cabinet depth = drawer length + 12 mm Actual loss of extension = 9 mm
32
128 192 224 256 288 352
9
14 37
Bottom panel Width = Internal cabinet width - 68mm Length (wooden back) = drawer length - 24 mm Length (steel back) = drawer length - 22 mm
Pre-drilling Dimensions of Bottom Panel for Fixing Euro ScrewsDrilling Template539 Pre-drill 5mm x 9mm deep
see page 58
Cutting Dimensions for Front Panel
Width = Internal cabinet width - 82mm
13
32
32
TRIOMAX
Standard Drawer - MS
Roller bearing concealed runners Full extension with synchro control Steel drawer side 83mm Load capacity of 50kg Quick assembly Flexible 3-dimensional front adjustment Sylent integrated cushioning system Integrated Self-Aligning and Self-Engaging stabiliser3 6
5
2 1 4
1
Cabinet Profile Left / Right : electro galvanised
2
Drawer Side Left / Right :
3
Railing Set Left / Right : Screw-on ExpansionRRAS-E.321.XX RRAS-E.371.XX RRAS-E.421.XX RRAS-E.471.XX RRAS-E.521.XX
Drawer Length
350mm 400mm 450mm 500mm 550mm 4
TM46.35.EG TM46.40.EG TM46.45.EG TM46.50.EG TM46.55.EG
TD36.35.XX TD36.40.XX TD36.45.XX TD36.50.XX TD36.55.XX
RRAS-N.321.XX RRAS-N.371.XX RRAS-N.421.XX RRAS-N.471.XX RRAS-N.521.XX
Cover Cap-harn Logo2X RBC.62030-L1.XX
5
Front Fixing Bracket Left / Right :Screw- on Press-in 2X 2X RBF.21030.NA RBF.22030.NA RBF.23030.NA
Expansion 2X 6
Rear Fixing Bracket Left / Right :RBR.77030.XX Steel Back see page 48
Colour Code XX Standard : 01 - R9010 White 22 - R9006 Grey Metallic 24 - R7037 Dust Grey Available upon request : 02 - R9001 Cream 21 - R7004 Grey 27 - Anthracite
14
Space Requirements and Front Installation Dimensions
Back Installation Dimensions
34.0 -1.0
+1.0
For Expansion Railing to pre-drill 10mm x 12mm 34.0 For press-in and expansion front fixing brackets to pre-drill 10mm x 12mm
9.0 6 14
min. 124
64
32
93
min. 33
Bottom panel width + 34mm
17.0
Front overlay
Cabinet Profile Screw Positions
47.5
Cutting Dimensions for 16mm ChipboardBack panel Width = internal cabinet width - 79mm Height = 142mm
Drawer Length
Min. internal cabinet depth = drawer length + 3 mm Actual loss of extension = 0 mm
350 mm 400 mm 450 mm 500 mm 550 mm14 256 128 192 224 9 5 37 Bottom panel Width = Internal cabinet width - 68mm Length (wooden back) = drawer length - 24 mm Length (steel back) = drawer length - 22 mm
Pre-drilling Dimensions of Bottom Panel for Fixing Euro ScrewsDrilling Template539 Pre-drill 5mm x 9mm deep
see page 58
352
288
15
32
64
TRIOMAXInner Drawer - MS
Roller bearing concealed runners Full extension with synchro control Steel drawer side 83mm Load capacity of 50kg Quick assembly Sylent integrated cushioning system Integrated Self-Aligning and Self-Engaging stabiliser7 3 6
5 2 1 4
1
Cabinet Profile Left / Right : electro galvanised
2
Drawer Side Left / Right :
3
Railing Set Left / Right :
Drawer Length
Screw-onTM46.35.EG TM46.40.EG TM46.45.EG TM46.50.EG TM46.55.EG TD36.35.XX TD36.40.XX TD36.45.XX TD36.50.XX TD36.55.XX 7 RRAS-N.321.XX RRAS-N.371.XX RRAS-N.421.XX RRAS-N.471.XX RRAS-N.521.XX
ExpansionRRAS-E.321.XX RRAS-E.371.XX RRAS-E.421.XX RRAS-E.471.XX RRAS-E.521.XX
350mm 400mm 450mm 500mm 550mm 4
Cover Cap-harn Logo2X RBC.62030-L1.XX
Front Panel
5
Front Fixing Bracket Left / Right :RBF.57030.XX Included one piece 203.000
Cabinet Width(16mm side panel)
400mm 450mm 500mm 550mm 600mm 900mm 1000mm 1200mm
RPF860.285.XX RPF860.335.XX RPF860.385.XX RPF860.435.XX RPF860.485.XX RPF860.785.XX RPF860.885.XX RPF860.1085.XX
6
Rear Fixing Bracket Left / Right :RBR.77030.XX Steel Back see page 48
Colour Code XX Standard : 01 - R9010 White 22 - R9006 Grey Metallic 24 - R7037 Dust Grey Available upon request : 02 - R9001 Cream 21 - R7004 Grey 27 - Anthracite
16
Space Requirements and Front Installation Dimensions
Back Installation Dimensions
-1.0 34.0 -
+1.0
34.0
9.06 min. 124 14
Cabinet Profile Screw Positions
min. 33
93
Cutting Dimensions for 16mm ChipboardBack panel Width = internal cabinet width - 79mm Height = 142mm
Drawer Length
Min. internal cabinet depth = drawer length + 12 mm Actual loss of extension = 9 mm
350 mm 400 mm 450 mm 500 mm 550 mm32 128 192 224 256 288 352 9 14 37
Bottom panel Width = Internal cabinet width - 68mm Length (wooden back) = drawer length - 24 mm Length (steel back) = drawer length - 22 mm
Pre-drilling Dimensions of Bottom Panel for Fixing Euro ScrewsDrilling Template539 Pre-drill 5mm x 9mm deep
see page 58
Cutting Dimensions for Front Panel
Width = Internal cabinet width - 82mm
17
32
64
TRIOMAX
Standard Drawer - MT
Roller bearing concealed runners Full extension with synchro control Steel drawer side 115mm Load capacity of 50kg Quick assembly Flexible 3 -dimensional front adjustment Sylent integrated cushioning system Integrated Self-Aligning and Self-Engaging stabiliser5 2 1 4 3 6
1
Cabinet Profile Left / Right : electro galvanised
2
Drawer Side Left / Right :
3
Railing Set Left / Right : Screw-on ExpansionRRAS-E.371.XX RRAS-E.421.XX RRAS-E.471.XX RRAS-E.521.XX
Drawer Length 400mm 450mm 500mm 550mm 4 TM46.40.EG TM46.45.EG TM46.50.EG TM46.55.EG TD38.40.XX TD38.45.XX TD38.50.XX TD38.55.XX
RRAS-N.371.XX RRAS-N.421.XX RRAS-N.471.XX RRAS-N.521.XX
Cover Cap-harn Logo2X RBC.62030-L1.XX
5
Front Fixing Bracket Left / Right :Screw- on Press-in 2X 2X RBF.21030.NA RBF.22030.NA RBF.23030.NA
Expansion 2X 6
Rear Fixing Bracket Left / Right :RBR.77830.XX Steel Back see page 48
Colour Code XX Standard : 01 - R9010 White 22 - R9006 Grey Metallic 24 - R7037 Dust Grey Available upon request : 02 - R9001 Cream 21 - R7004 Grey 27 - Anthracite
18
Space Requirements and Front Installation Dimensions
Back Installation Dimensions
34.0 -1.0
+1.0
34.0
For expansion railing to pre-drill 10mm x 12mm
9.0 14min 156 For press-in and expansion front fixing brackets to pre-drill 10mm x 12mm 96 125 32 min 33 Bottom panel width + 34mm 17.0 Front overlay
Cabinet Profile Screw Positions
47.5
Cutting Dimensions for 16mm ChipboardBack panel Width = internal cabinet width - 79mm Height = 174mm
Drawer Length400 mm 450 mm 500 mm 550 mm
Min. internal cabinet depth = drawer length + 3 mm Actual loss of extension = 0 mm
14 256
128 192 224
9
5 37
Bottom panel Width = Internal cabinet width - 68mm Length (wooden back) = drawer length - 24 mm Length (steel back) = drawer length - 22 mm
Pre-drilling Dimensions of Bottom Panel for Fixing Euro ScrewsDrilling Template539 Pre-drill 5mm x 9mm deep
352
288
see page 58
19
32
32
64
6
TRIOMAX
Inner Drawer - MT
Roller bearing concealed runners Full extension with synchro control Steel drawer side 115mm Load capacity of 50kg Quick assembly Sylent integrated cushioning system Integrated Self-Aligning and Self-Engaging stabiliser8 3 6
7
5
2 1 4
1
Cabinet Profile Left / Right : electro galvanised
2
Drawer Side Left / Right :
3
Railing Set Left / Right : Screw-on ExpansionRRAS-E.371.XX RRAS-E.421.XX RRAS-E.471.XX RRAS-E.521.XX
Drawer Length 400mm 450mm 500mm 550mm 4 TM46.40.EG TM46.45.EG TM46.50.EG TM46.55.EG TD38.40.XX TD38.45.XX TD38.50.XX TD38.55.XX 7
RRAS-N.371.XX RRAS-N.421.XX RRAS-N.471.XX RRAS-N.521.XX 8
Cover Cap-harn Logo2X RBC.62030-L1.XX
Front Panel
Cross Railing
5
Front Fixing Bracket Left / Right :RBF.57830.XX Included one piece 203.000
Cabinet Width(16mm side panel)
400mm 450mm 500mm 550mm 600mm 900mm 1000mm 1200mm
RPF860.285.XX RPF860.335.XX RPF860.385.XX RPF860.435.XX RPF860.485.XX RPF860.785.XX RPF860.885.XX RPF860.1085.XX
RRF.305.XX RRF.355.XX RRF.405.XX RRF.455.XX RRF.505.XX RRF.805.XX RRF.905.XX RRF.1105 .XX
6
Rear Fixing Bracket Left / Right :RBR.77830.XX Steel Back see page 48
Colour Code XX Standard : 01 - R9010 White 22 - R9006 Grey Metallic 24 - R7037 Dust Grey Available upon request : 02 - R9001 Cream 21 - R7004 Grey 27 - Anthracite
20
Space Requirements and Front Installation Dimensions
Back Installation Dimensions
34.0 -1.0
+1.0
34.0
9.0 14 6min 156 125
Cabinet Profile Screw Positions
min 33
Cutting Dimensions for 16mm ChipboardBack panel Width = internal cabinet width - 79mm Height = 174mm
Drawer Length400 mm 450 mm 500 mm 550 mm
Min. internal cabinet depth = drawer length + 12 mm Actual loss of extension = 9 mm
32
128 192 224 256 288 352
9
14 37
Bottom panel Width = Internal cabinet width - 68mm Length (wooden back) = drawer length - 24 mm Length (steel back) = drawer length - 22 mm
Pre-drilling Dimensions of Bottom Panel for Fixing Euro ScrewsDrilling Template539 Pre-drill 5mm x 9mm deep
see page 58
Cutting Dimensions for Front Panel
Cutting Dimensions for Cross Railing
Width = Internal cabinet width - 82mm
Width = Internal cabinet width - 62mm
21
32
32
64
TRIOMAX
Standard Drawer - Double Railing HS
Roller bearing concealed runners Full extension with synchro control Steel drawer side 83mm Load capacity of 50kg Quick assembly Flexible 3-dimensional front adjustment Sylent integrated cushioning system Integrated Self-Aligning and Self-Engaging stabiliser5 2 1 4 3
7 6
1
Cabinet Profile Left / Right : electro galvanised
2
Drawer Side Left / Right :
3
Railing Set Left / Right : Screw-on Expansion2X RRAS-E.321.XX 2X RRAS-E.371.XX 2X RRAS-E.421.XX 2X RRAS-E.471.XX 2X RRAS-E.521.XX
Drawer Length
350mm 400mm 450mm 500mm 550mm 4
TM46.35.EG TM46.40.EG TM46.45.EG TM46.50.EG TM46.55.EG
TD36.35.XX TD36.40.XX TD36.45.XX TD36.50.XX TD36.55.XX
2X RRAS-N.321.XX 2X RRAS-N.371.XX 2X RRAS-N.421.XX 2X RRAS-N.471.XX 2X RRAS-N.521.XX
Cover Cap-harn Logo2X RBC.62030-L1.XX
5
Front Fixing Bracket Left / Right :Screw- on Press-in 2X 2X RBF.21030.NA RBF.22030.NA RBF.23030.NA
Expansion 2X 6
Rear Fixing Bracket Left / Right :RBR.77030.XX Steel Back n/a
7
Rear Fixing Bracket Left / Right : - add onRBR.73030.XXColour Code XX Standard : 01 - R9010 White 22 - R9006 Grey Metallic 24 - R7037 Dust Grey Available upon request : 02 - R9001 Cream 21 - R7004 Grey 27 - Anthracite
22
Space Requirements and Front Installation Dimensions
Back Installation Dimensions
34.0 -1.0
+1.0
34.0 For Expansion Railing to pre-drill 10mm x 12mm
9.0 6 14
64
6
32
93
min. 33
Bottom panel width + 34mm
17.0
Front overlay
Cabinet Profile Screw Positions
47.5
Cutting Dimensions for 16mm ChipboardBack panel Width = internal cabinet width - 79mm Height = 206mm
Drawer Length
Min. internal cabinet depth = drawer length + 3 mm Actual loss of extension = 0 mm
350 mm 400 mm 450 mm 500 mm 550 mm14 256 128 192 224 9 5 37
Bottom panel Width = Internal cabinet width - 68mm Length (wooden back) = drawer length - 24 mm Length (steel back) = drawer length - 22 mm
Pre-drilling Dimensions of Bottom Panel for Fixing Euro ScrewsDrilling Template539 Pre-drill 5mm x 9mm deep
see page 58
352
288
23
32
64
For press-in and expansion front fixing brackets to pre-drill 10mm x 12mm
min. 196
64
6
32
32
TRIOMAX
Inner Drawer - Double Railing HS
Roller bearing concealed runners Full extension with synchro control Steel drawer side 83mm Load capacity of 50kg Quick assembly Sylent integrated cushioning system Integrated Self-Aligning and Self-Engaging stabiliser9 3
7 6
5 8
2 1 4
1
Cabinet Profile Left / Right : electro galvanised
2
Drawer Side Left / Right :
3
Railing Set Left / Right : Screw-on Expansion
Drawer Length
350mm 400mm 450mm 500mm 550mm 4
TM46.35.EG TM46.40.EG TM46.45.EG TM46.50.EG TM46.55.EG
TD36.35.XX TD36.40.XX TD36.45.XX TD36.50.XX TD36.55.XX 8
2X RRAS-N.321.XX 2X RRAS-E.321.XX 2X RRAS-N.371.XX 2X RRAS-E.371.XX 2X RRAS-N.421.XX 2X RRAS-E.421.XX 2X RRAS-N.471.XX 2X RRAS-E.471.XX 2X RRAS-N.521.XX 2X RRAS-E.521.XX 9
Cover Cap-harn Logo2X RBC.62030-L1.XX
Front Panel
Cross Railing
5
Front Fixing Bracket Left / Right :RBF.58030.XX Included one piece 203.000
Cabinet Width(16mm side panel)
400mm 450mm 500mm 550mm 600mm 900mm 1000mm 1200mm
RPF860.285.XX RPF860.335.XX RPF860.385.XX RPF860.435.XX RPF860.485.XX RPF860.785.XX RPF860.885.XX RPF860.1085.XX
RRF.305.XX RRF.355.XX RRF.405.XX RRF.455.XX RRF.505.XX RRF.805.XX RRF.905.XX RRF.1105 .XX
6
Rear Fixing Bracket Left / Right :RBR.77030.XX Steel Back n/a
7
Rear Fixing Bracket Left / Right : - add onRBR.73030.XX
Colour Code XX Standard : 01 - R9010 White 22 - R9006 Grey Metallic 24 - R7037 Dust Grey Available upon request : 02 - R9001 Cream 21 - R7004 Grey 27 - Anthracite
24
Space Requirements and Front Installation Dimensions
Back Installation Dimensions
34.0 - 1.0
+1.0
34.0
9.06 6 14
min. 196
6
Cabinet Profile Screw Positions
min. 33
93
Cutting Dimensions for 16mm ChipboardBack panel Width = internal cabinet width - 79mm Height = 206mm
Drawer Length
Min. internal cabinet depth = drawer length + 12 mm Actual loss of extension = 9 mm
350 mm 400 mm 450 mm 500 mm 550 mm32 128 192 224 256 288 352 9 14 37 Bottom panel Width = Internal cabinet width - 68mm Length (wooden back) = drawer length - 24 mm Length (steel back) = drawer length - 22 mm
Pre-drilling Dimensions of Bottom Panel for Fixing Euro ScrewsDrilling Template539 Pre-drill 5mm x 9mm deep
see page 58
Cutting Dimensions for Front Panel
Cutting Dimensions for Cross Railing
Width = Internal cabinet width - 82mm
Width = Internal cabinet width - 62mm
25
32
64
32
32
TRIOMAX
Standard Drawer - Side Extend HS
Roller bearing concealed runners Full extension with synchro control Steel drawer side 83mm Load capacity of 50kg Quick assembly Flexible 3-dimensional front adjustment Sylent integrated cushioning system Integrated Self-Aligning and Self-Engaging stabiliser5 2 1 4 3 7
6
1
Cabinet Profile Left / Right : electro galvanised
2
Drawer Side Left / Right :
3
Railing Set Left / Right : Screw-on ExpansionRRAS-E.321.XX RRAS-E.371.XX RRAS-E.421.XX RRAS-E.471.XX RRAS-E.521.XX
Drawer Length
350mm 400mm 450mm 500mm 550mm 4
TM46.35.EG TM46.40.EG TM46.45.EG TM46.50.EG TM46.55.EG
TD36.35.XX TD36.40.XX TD36.45.XX TD36.50.XX TD36.55.XX
RRAS-N.321.XX RRAS-N.371.XX RRAS-N.421.XX RRAS-N.471.XX RRAS-N.521.XX
Cover Cap-harn Logo2X RBC.62030-L1.XX
5
Front Fixing Bracket Left / Right :Screw- on 2X Press-in 2X Expansion 2X RBF.21030.NA RBF.22030.NA RBF.23030.NA
6
Rear Fixing Bracket Left / Right :RBR.78030.XX Steel Back see page 48
7
Side Extend Left / Right :Drawer Length 350mm 400mm 450mm 500mm 550mm RSE-H.321.XX RSE-H.371.XX RSE-H.421.XX RSE-H.471.XX RSE-H.521.XXColour Code XX Standard : 01 - R9010 White 22 - R9006 Grey Metallic 24 - R7037 Dust Grey Available upon request : 02 - R9001 Cream 21 - R7004 Grey 27 - Anthracite
26
Space Requirements and Front Installation Dimensions
Back Installation Dimensions
34.0 -1.0
+1.0
34.0 For Expansion Railing to pre-drill 10mm x 12mm 9.0 6 14
min. 196
128
For press-in and expansion front fixing brackets to pre-drill 10mm x 12mm
6 32 93 min. 33 Bottom panel width + 34mm 17.0 Front overlay
Cabinet Profile Screw Positions
47.5
Cutting Dimensions for 16mm ChipboardBack panel Width = internal cabinet width - 79mm Height = 206mm
Drawer Length
Min. internal cabinet depth = drawer length + 3 mm Actual loss of extension = 0 mm
350 mm 400 mm 450 mm 500 mm 550 mm14 256 128 192 224 9 5 37 Bottom panel Width = Internal cabinet width - 68mm Length (wooden back) = drawer length - 24 mm Length (steel back) = drawer length - 22 mm
Pre-drilling Dimensions of Bottom Panel for Fixing Euro ScrewsDrilling Template539 Pre-drill 5mm x 9mm deep
see page 58
352
288
27
32
96
32
TRIOMAX
Inner Drawer - Side Extend HS
Roller bearing concealed runners Full extension with synchro control Steel drawer side 83mm Load capacity of 50kg Quick assembly Sylent integrated cushioning system Integrated Self-Aligning and Self-Engaging stabiliser8 9 3 7 6
5 2 1 4
1
Cabinet Profile Left / Right : electro galvanised
2
Drawer Side Left / Right :
3
Railing Set Left / Right : Screw-on ExpansionRRAS-E.321.XX RRAS-E.371.XX RRAS-E.421.XX RRAS-E.471.XX RRAS-E.521.XX
Drawer Length 270mm 350mm 400mm 450mm 500mm 550mm 4 TM46.27.EG TM46.35.EG TM46.40.EG TM46.45.EG TM46.50.EG TM46.55.EG TD36.27.XX TD36.35.XX TD36.40.XX TD36.45.XX TD36.50.XX TD36.55.XX 8
RRAS-N.321.XX RRAS-N.371.XX RRAS-N.421.XX RRAS-N.471.XX RRAS-N.521.XX 9
Cover Cap-harn Logo2X RBC.62030-L1.XX
Front Panel
Cross Railing
5
Front Fixing Bracket Left / Right :RBF.58030.XX Included one piece 203.000
Cabinet Width(16mm side panel)
400mm 450mm 500mm 550mm 600mm 900mm 1000mm 1200mm
RPF860.285.XX RPF860.335.XX RPF860.385.XX RPF860.435.XX RPF860.485.XX RPF860.785.XX RPF860.885.XX RPF860.1085.XX
RRF.305.XX RRF.355.XX RRF.405.XX RRF.455.XX RRF.505.XX RRF.805.XX RRF.905.XX RRF.1105.XX
6
Rear Fixing Bracket Left / Right :RBR.78030.XX Steel Back see page 48
7
Side Extend Left / Right :Drawer Length 350mm 400mm 450mm 500mm 550mm RSE-H.321.XX RSE-H.371.XX RSE-H.421.XX RSE-H.471.XX RSE-H.521.XXColour Code XX Standard : 01 - R9010 White 22 - R9006 Grey Metallic 24 - R7037 Dust Grey Available upon request : 02 - R9001 Cream 21 - R7004 Grey 27 - Anthracite
28
Space Requirements and Front Installation Dimensions
Back Installation Dimensions
34.0 -1.0
+1.0
34.0
9.0 14 6min. 196
Cabinet Profile Screw Positions
min. 33
93
Cutting Dimensions for 16mm ChipboardBack panel Width = internal cabinet width - 79mm Height = 206mm
Drawer Length
Min. internal cabinet depth = drawer length + 12 mm Actual loss of extension = 9 mm
350 mm 400 mm 450 mm 500 mm 550 mm32 128 192 224 256 288 352 9 14 37Bottom panel Width = Internal cabinet width - 68mm Length (wooden back) = drawer length - 24 mm Length (steel back) = drawer length - 22 mm
Pre-drilling Dimensions of Bottom Panel for Fixing Euro ScrewsDrilling Template539 Pre-drill 5mm x 9mm deep
see page 58
Cutting Dimensions for Front Panel
Cutting Dimensions for Cross Railing
Width = Internal cabinet width - 82mm
Width = Internal cabinet width - 62mm
29
32
96
6
32
TRIOMAXFiling System
Roller bearing concealed runners Full extension with synchro control Steel drawer side 83mm Load capacity of 50kg Quick assembly Flexible 2-dimensional front adjustment Sylent integrated cushioning system Integrated Self-Aligning and Self-Engaging stabiliser3 8 7
6
5
2 1 4
1
Cabinet Profile Left / Right : electro galvanised
2
Drawer Side Left / Right :
3
Side Hanging Rail Left / Right :
Drawer Length 450mm 500mm 550mm 4 TM46.45.EG TM46.50.EG TM46.55.EG TD36.45.XX TD36.50.XX TD36.55.XX 7 RMF.450T.XX RMF.500T.XX RMF.550T.XXOrder Left & Right
Cover Cap-harn Logo2X RBC.62030-L1.XX
Cross Hanging RailRMF-C.475.XX
5
Front Fixing Bracket Left / Right :Screw- on 2X Press-in 2X Expansion 2X RBF.21030.NA RBF.22030.NA RBF.23030.NA
8
Cross Hanging Rail Connector2X for each Cross Hanging Rail RFC.8600.NA
6
Rear Fixing Bracket Left / Right :RBR.76030. XX Steel Back n/a
Colour Code XX Standard : 01 - R9010 White 22 - R9006 Grey Metallic 24 - R7037 Dust Grey Available upon request : 02 - R9001 Cream 21 - R7004 Grey 27 - Anthracite
30
Space Requirements and Front Installation DimensionsBottom Panel - 29mm
Back Installation Dimensions
18.5
9.0 18.5
31.5
31.5
min. 267
166.5
34.0 -1.0
+1.0
34.0
For press-in and expansion front fixing brackets to pre-drill 10mm x 12mm
9.0
32
93
min. 33
Bottom panel width + 34mm
17.0
Front overlay
Cabinet Profile Screw Positions
47.5
Cutting Dimensions for 16mm ChipboardBack panel Width = internal cabinet width - 79mm Height = 264mm
Drawer Length450 mm 500 mm 550 mm
Min. internal cabinet depth = drawer length + 3 mm Actual loss of extension = 0 mm
14 288 256
192 224
9
5 37
Bottom panel Width = Internal cabinet width - 68mm Length (wooden back) = drawer length - 24 mm Length (steel back) = drawer length - 22 mm
352
Pre-drilling Dimensions of Bottom Panel for Fixing Euro ScrewsDrilling Template see page 58
539 Pre-drill 5mm x 9mm deep
DIN A4 Along Drawer Width
DIN A4 Along Drawer LengthmWidth = internal cabinet width - 92mm
Width = internal cabinet width - 92mm
32
9m
32
9m
m
internal cabinet width = 410mm
min. drawer length = 450mm
31
32
172.5
TRIOMAX
Organiseplus - Cutlery Trays & Utensil Dividers
197 64 39 223 39
285 64 311 39
374 64 400
Drawer Length 450mm 500mm 550mm RCI.45S2.SS RCI.50S2.SS RCI.55S2.SS
Drawer Length 450mm 500mm 550mm RCI.45D3.SS RCI.50D3.SS RCI.55D3.SS
Drawer Length 450mm 500mm 550mm RCI.45T4.SS RCI.50T4.SS RCI.55T4.SS
207 64 39 246 39
306 64 350 39
295 64 322
Drawer Length 450mm 500mm 550mm RCI.45U2.SS RCI.50U2.SS RCI.55U2.SS
Drawer Length 450mm 500mm 550mm RCI.45U3.SS RCI.50U3.SS RCI.55U3.SS
Drawer Length 450mm 500mm 550mm RCI.45S3U.SS RCI.50S3U.SS RCI.55S3U.SS
394 64 39 420 39
295 64 322
Drawer Length 450mm 500mm 550mm RCI.45S4U.SS RCI.50S4U.SS RCI.55S4U.SS
Drawer Length 450mm 500mm 550mm RCI.45S3M.SS RCI.50S3M.SS RCI.55S3M.SS
Cutlery Trays
Utensil Cross Dividers
Dimensions for Utensil Dividers
x Length 88x88mm 88x176mm 88x264mm 88x352mm RCI.110.A2 RCI.110.A3 RCI.110.A4 RCI.110.A5 Width 88mm 187mm RCI.110.A9 RCI.110.A10
X = Drawer Length - 26mm
32
TRIOMAXCutlery
Organiseplus - Recommendation & Ordering Information
Cabinet width
Drawer Length RCI.XXS2.SS RCI.XXD3.SS RCI.XXT4.SS RCI.XXU2.SS
300-400
450mm 500mm 550mm
RCI.45S2.SS RCI.50S2.SS RCI.55S2.SS
x1 x1 x1
450-500
450mm 500mm 550mm
RCI.45D3.SS RCI.50D3.SS RCI.55D3.SS
x1 x1 x1
550-600
450mm 500mm 550mm
RCI.45T4.SS RCI.50T4.SS RCI.55T4.SS
x1 x1 x1
700
450mm 500mm 550mm
RCI.45S2.SS RCI.50S2.SS RCI.55S2.SS
x1 x1 x1
RCI.45D3.SS RCI.50D3.SS RCI.55D3.SS
x1 x1 x1
800
450mm 500mm 550mm
RCI.45D3.SS RCI.50D3.SS RCI.55D3.SS
x2 x2 x2
900
450mm 500mm 550mm
RCI.45D3.SS RCI.50D3.SS RCI.55D3.SS
x1 x1 x1
RCI.45T4.SS RCI.50T4.SS RCI.55T4.SS
x1 x1 x1
1000
450mm 500mm 550mm
RCI.45T4.SS RCI.50T4.SS RCI.55T4.SS
x2 x2 x2
1200
450mm 500mm 550mm
RCI.45D3.SS RCI.50D3.SS RCI.55D3.SS
x1 x1 x1
RCI.45T4.SS RCI.50T4.SS RCI.55T4.SS
x1 x1 x1
RCI.45U2.SS RCI.50U2.SS RCI.55U2.SS
x1 x1 x1
33
TRIOMAXCleaning
Organiseplus - Recommendation & Ordering Information
Cabinet width
Drawer Length RCI.XXS2.SS RCI.XXU2.SS RCI.XXU3.SS RCI.XXS3U.SS RCI.XX4U.SS
600
450mm 500mm 550mm
RCI.45S4U.SS x1 RCI.50S4U.SS x1 RCI.55S4U.SS x1
700
450mm 500mm 550mm
RCI.45S2.SS RCI.50S2.SS RCI.55S2.SS
x1 x1 x1
RCI.45S3U.SS RCI.50S3U.SS RCI.55S3U.SS
x1 x1 x1
800
450mm 500mm 550mm
RCI.45S3U.SS RCI.50S3U.SS RCI.55S3U.SS
x2 x2 x2
900
450mm 500mm 550mm
RCI.45S3U.SS RCI.50S3U.SS RCI.55S3U.SS
x1 x1 x1
RCI.45S4U.SS RCI.50S4U.SS RCI.55S4U.SS
x1 x1 x1
1000
450mm 500mm 550mm
RCI.45S2.SS RCI.50S2.SS RCI.55S2.SS
x1 x1 x1
RCI.45U2.SS RCI.50U2.SS RCI.55U2.SS
x1 x1 x1
RCI.45S3U.SS RCI.50S3U.SS RCI.55S3U.SS
x1 x1 x1
1200
450mm 500mm 550mm
RCI.45U3.SS RCI.50U3.SS RCI.55U3.SS
x1 x1 x1
RCI.45S3U.SS RCI.50S3U.SS RCI.55S3U.SS
x2 x2 x2
35
TRIOMAXPreparation
Organiseplus - Recommendation & Ordering Information
Cabinet width
Drawer Length RCI.XXS2.SS RCI.XXU2.SS RCI.XXU3.SS RCI.XXS3U.SS RCI.XX4U.SS
300
450mm 500mm 550mm
RCI.45S2.SS RCI.50S2.SS RCI.55S2.SS
x1 x1 x1
400-500
450mm 500mm 550mm
RCI.45U2.SS RCI.50U2.SS RCI.55U2.SS
x1 x1 x1
550
450mm 500mm 550mm
RCI.45S3U.SS RCI.50S3U.SS RCI.55S3U.SS
x1 x1 x1
600-700
450mm 500mm 550mm
RCI.45S4U.SS x1 RCI.50S4U.SS x1 RCI.55S4U.SS x1
800
450mm 500mm 550mm
RCI.45S3U.SS x2 RCI.50S3U.SS x2 RCI.55S3U.SS x2
900
450mm 500mm 550mm
RCI.45S3U.SS x1 RCI.50S3U.SS x1 RCI.55S3U.SS x1
RCI.45S4U.SS x1 RCI.50S4U.SS x1 RCI.55S4U.SS x1
1000
450mm 500mm 550mm
RCI.45S2.SS RCI.50S2.SS RCI.55S2.SS
x1 x1 x1
RCI.45U2.SS RCI.50U2.SS RCI.55U2.SS
x1 x1 x1
RCI.45S3U.SS x1 RCI.50S3U.SS x1 RCI.55S3U.SS x1
1200
450mm 500mm 550mm
RCI.45U3.SS RCI.50U3.SS RCI.55U3.SS
x1 x1 x1
RCI.45S3U.SS x2 RCI.50S3U.SS x2 RCI.55S3U.SS x2
36
TRIOMAXCooking Utensil
Organiseplus - Recommendation & Ordering Information
Cabinet width
Drawer Length RCI.XXS2.SS RCI.XXU2.SS RCI.XXU3.SS RCI.XXS3U.SS RCI.XX4U.SS
600-700
450mm 500mm 550mm
RCI.45S4U.SS x1 RCI.50S4U.SS x1 RCI.55S4U.SS x1
800
450mm 500mm 550mm
RCI.45S3U.SS x2 RCI.50S3U.SS x2 RCI.55S3U.SS x2
900
450mm 500mm 550mm
RCI.45S3U.SS x1 RCI.50S3U.SS x1 RCI.55S3U.SS x1
RCI.45S4U.SS x1 RCI.50S4U.SS x1 RCI.55S4U.SS x1
1000
450mm 500mm 550mm
RCI.45S2.SS RCI.50S2.SS RCI.55S2.SS
x1 x1 x1
RCI.45U2.SS RCI.50U2.SS RCI.55U2.SS
x1 x1 x1
RCI.45S3U.SS x1 RCI.50S3U.SS x1 RCI.55S3U.SS x1
1200
450mm 500mm 550mm
RCI.45U3.SS RCI.50U3.SS RCI.55U3.SS
x1 x1 x1
RCI.45S3U.SS x2 RCI.50S3U.SS x2 RCI.55S3U.SS x2
37
TRIOMAXDivider Panel
Roller bearing concealed runners Full extension with synchro control Steel drawer side 83mm Load capacity of 50kg Quick assembly Flexible 3-dimensional front adjustment Sylent integrated cushioning system Integrated Self-Aligning and Self-Engaging stabilizer1 2 3
1
Divider Panel
2
Divider Panel Connector Left / Right :RPC.6100.XX
3
Lateral Divider
Cabinet Width(16mm side panel)
RLD.6600.XX
400mm 450mm 500mm 550mm 600mm 900mm 1000mm 1200mm
RPD.278.XX RPD.328.XX RPD.378.XX RPD.428.XX RPD.478.XX RPD.778.XX RPD.878.XX RPD.1078.XX
Cutting Dimensions for Divider Panel
Width = Internal cabinet width - 89mmColour Code XX Standard : 01 - R9010 White 22 - R9006 Grey Metallic 24 - R7037 Dust Grey Available upon request : 02 - R9001 Cream 21 - R7004 Grey 27 - Anthracite
38
TRIOMAXDivider Railing
Roller bearing concealed runners Full extension with synchro control Steel drawer side 83mm Load capacity of 50kg Quick assembly Flexible 3-dimensional front adjustment Sylent integrated cushioning system Integrated Self-Aligning and Self-Engaging stabilizer
2 1
1
Cross Railing
2
Cross Railing Connector2X for each Cross Railing RRC.7200.XX
Cabinet Width(16mm side panel)
400mm 450mm 500mm 550mm 600mm 900mm 1000mm 1200mm
RRF.309.XX RRF.359.XX RRF.409.XX RRF.459.XX RRF.509.XX RRF.809.XX RRF.909.XX RRF.1109.XX
Cutting Dimensions for Cross Railing
Width = Internal cabinet width - 58mmColour Code XX Standard : 01 - R9010 White 22 - R9006 Grey Metallic 24 - R7037 Dust Grey Available upon request : 02 - R9001 Cream 21 - R7004 Grey 27 - Anthracite
39
TRIOMAXDivider Panel
Organiseplus - Recommendation & Ordering Information
Drawer Length
Cabinet width
Divider Panel
Divider Panel Connector
Lateral Divider
450 450 450 500,550 500,550
300-400 450-600 800-1200 300-400 450-600 800-1200 400-550 600-800 900-1000
x1 x1 x1 x2 x2 x2 x1 x1 x1
x1 x1 x1 x2 x2 x2 x1 x1 x1 x2 x4 x3 x6 x2 x3
Provisions
500,550 450,500,550 450,500,550 450,500,550
Crockery450,500,550 450,500,550 450,500,550 300-400 450-600 800-1200x1 x1 x1 x1 x1 x1 x2 x3
Plastic Containers450,500,550 900-1200x2 x2
Cleaning450,500,550 900-1200 x2 x2 x5
Recycle / Waste Bins 40
TRIOMAXDivider Panel
Organiseplus - Recommendation & Ordering Information
Drawer Length
Cabinet width
Divider Panel
Divider Panel Connector
Lateral Divider
450 450 450 500,550 500,550
300-400 450-600 800-1200 300-400 450-600 800-1200 275-300 275-300
x1 x1 x1 x2 x2 x2 x3 x4
x1 x1 x1 x2 x2 x2 x3 x4 x3 x6 x2 x4 x2 x3
Open Provisions
500,550 450 500,550
Bottles450 450 500,550 500,550 600 800-1200 600 800-1200 x1 x1 x2 x2 x1 x1 x2 x2 x2 x3 x3 x6
Cooking Utensils450 450 450 500,550 500,550 300-400 450-600 800-1200 300-400 450-600 800-1200 x1 x1 x1 x2 x2 x2 x1 x1 x1 x2 x2 x2 x3 x6 x2 x3
Baking / Ingredients
500,550
41
TRIOMAX
Sink Cabinet Drawer
Roller bearing concealed runners Full extension with synchro control Steel drawer side 83mm Load capacity of 50kg Quick assembly Flexible 3-dimensional front adjustment Sylent integrated cushioning system Integrated Self-Aligning and Self-Engaging stabiliser5 10 7 2 9 8 3 6
1
4
1
Cabinet Profile Left / Right : electro galvanised
2
Drawer Side Left / Right :
3
Sink Drawer Side Left / Right :
Drawer Length 450mm 500mm 550mm 7 TM46.45.EG TM46.50.EG TM46.55.EG TD36.45.XX TD36.50.XX TD36.55.XX 8 TD36.30.XX TD36.35.XX TD36.40.XX 9
Side Extend Left / Right : Drawer Side
Side Extend Left / Right : Sink Drawer
Railing Set for Sink Drawer Left / Right : Screw-on Expansion
Drawer Length 450mm 500mm 550mm 4 RSE-H.421.XX RSE-H.471.XX RSE-H.521.XX RSE-H.271.XX RSE-H.321.XX RSE-H.371.XX 10
2X RRAS-N.421.XX 2X RRAS-E.421.XX 2X RRAS-N.471.XX 2X RRAS-E.471.XX 2X RRAS-N.521.XX 2X RRAS-E.521.XX
Cover Cap-harn Logo4X RBC.62030-L1.XX
Sink Cabinet Adapter Set Left / Right :RBF.59130.XX
5
Front Fixing Bracket Left / Right :Screw- on 2X Press-in 2X Expansion 2X RBF .21030.NA RBF .22030.NA RBF .23030.NA
6
Rear Fixing Bracket Left / Right :2X Steel Back RBR.78030.XX n/aColour Code XX Standard : 01 - R9010 White 22 - R9006 Grey Metallic 24 - R7037 Dust Grey Available upon request : 02 - R9001 Cream 21 - R7004 Grey 27 - Anthracite
42
Space Requirements and Front Installation Dimensions
Back Installation Dimensions
34.0 -1.0
+1.0
34.0
For expansion railing to pre-drill 10mm x 12mm 9.0 6 14
64
min 196
128
For press-in and expansion front fixing brackets to pre-drill 10mm x12mm
64
32
93
79.5
min 33
ISW17.0
Bottom panel width + 34mm
X + 34mm
Front overlay
Cabinet Profile Screw Positions
47.5
Divider Dimensions
Drawer Length450 mm 500 mm
Min. internal cabinet depth = drawer length + 3 mm Actual loss of extension = 0 mm
352
288
256
Cutting Dimensions for 16mm ChipboardX1 -11mm B1 X 2 -11mmB2
Pre-drilling Dimensions of Bottom Panel for Fixing Euro ScrewsDrilling Template see page 58
Back Panel
206mm
B1 A C9
X1A
X2
Bottom Panel
53
14
192 224
37
53Pre-drill 5mm x 9mm deep
B2
ISW +57 140
Wooden back drawer length - 24mm
ICW -68mm
DividerC ISW -11mm
X min X max ICW ISW
48 mm 225 mm Internal cabinet width Internal width between sink drawer sides
53mm
43
18
9
5
8.5
550 mm
9
32
96
6
32
TRIOMAXLarder Unit
1
Standard Drawer-S connected to front Inner Drawer - Double Railing HS Standard Drawer - Side Extend HS connected to front For this drawer, order neutral cabinet profile Part No. TM00.XX.EG
See page 6 See page 24 See page 26 See below See page 8 See page 26
2
3
1 4
Inner Drawer - S Standard Drawer - Side Extend HS connected to front
2
5
3
4
Neutral Cabinet Profile Left / Right : electro galvanisedDrawer Length 450mm 500mm 550mm TM00.45.EG TM00.50.EG TM00.55.EG
5
44
Space Requirements and Front Installation Dimensions
Cabinet Width - 300 / 400mm
34.0
+1.0 - 1.0
34.0
32
1649
672
480
Important Notice: Minimum one drawer connected to the front must be equipped with a gallery to provide tilt adjustment and to ensure front stability. It is recommended that all drawers, with exception for centre drawer be equipped with Sylent to ensure optimal operation. Refer to page 44 Drawer 3 on ordering information for cabinet profile without Sylent.1169
min. 1885
352
32
128
817
608
352
465
1950 For Expansion Railing to pre-drill 10mm x 12mm For press-in and expansion front fixing brackets to pre-drill 10mm x 12mm 49
47.5 min. 33 16 17.0 Front overlay
Bottom panel width + 34mm
32
128
416
45
TRIOMAX
Larder Unit with Door
1
Inner Drawer - Side Extend HS Inner Drawer - Side Extend HS Inner Drawer - Side Extend HS Inner Drawer - Side Extend HS Inner Drawer - Side Extend HS
See page 28 See page 28 See page 28 See page 28 See page 28
2
3
4
5 1
2
3
4
5
46
Space Requirements and Front Installation Dimensions
Drawer Locations
Hinge Locations
276
Recommended Cabinet Width 450 - 600mm Important Notice: Use only hinges with zero door protrusion when opened at 90 angle and more. Line boring information is based on base panel 16mm thick with 1mm gap. Changes in thickness of the base panel and/or position of first from bottom offsets all dimensions cabinet and front door.126132 32
cabinet bottom cabinet drawer on the
310
951
260
691
260
431
382
37276 16 17 32
49
32
921
47
TRIOMAXSteel BackDrawer SCabinet Width(16mm side panel)
400mm 450mm 500mm 550mm 600mm 900mm 1000mm 1200mm
RSBT3.333.XX RSBT3.383.XX RSBT3.433.XX RSBT3.483.XX RSBT3.533.XX RSBT3.833.XX RSBT3.933.XX RSBT3.1133.XX
Drawer MSCabinet Width(16mm side panel)
400mm 450mm 500mm 550mm 600mm 900mm 1000mm 1200mm
RSBT3R.333.XX RSBT3R.383.XX RSBT3R.433.XX RSBT3R.483.XX RSBT3R.533.XX RSBT3R.833.XX RSBT3R.933.XX RSBT3R.1133.XX
Drawer HSCabinet Width(16mm side panel)
400mm 450mm 500mm 550mm 600mm 900mm 1000mm 1200mm
RSBT3HR.333.XX RSBT3HR.383.XX RSBT3HR.433.XX RSBT3HR.483.XX RSBT3HR.533.XX RSBT3HR.833.XX RSBT3HR.933.XX RSBT3HR.1133.XX
Drawer TCabinet Width(16mm side panel)
400mm 450mm 500mm 550mm 600mm 900mm 1000mm 1200mm
RSBT4.333.XX RSBT4.383.XX RSBT4.433.XX RSBT4.483.XX RSBT4.533.XX RSBT4.833.XX RSBT4.933.XX RSBT4.1133.XX
Drawer MTCabinet Width(16mm side panel)
400mm 450mm 500mm 550mm 600mm 900mm 1000mm 1200mm
RSBT4R.333.XX RSBT4R.383.XX RSBT4R.433.XX RSBT4R.483.XX RSBT4R.533.XX RSBT4R.833.XX RSBT4R.933.XX RSBT4R.1133.XXColour Code XX Standard : 01 - R9010 White 22 - R9006 Grey Metallic 24 - R7037 Dust Grey Available upon request : 02 - R9001 Cream 21 - R7004 Grey 27 - Anthracite
48
TRIOMAXAccessoriesChipboard Screws 7.0Length
L
15.0mm
350.150 350.170
3.5
17.0mm
Euro Screws 8.0Length 10.0mm 360.100 360.115 360.130 360.145 360.200
6.0
11.5mm 13.0mm 14.5mm 20.0mm
Special Euro Screws 7.0Length 10.0mm 361.100 361.115 361.130 361.145
6.0
11.5mm 13.0mm 14.5mm
Dowels 10.5 11.5
501.115
Standard Drawer Front Locking Piece
Included 2 pan head screws
201.000
Inner Drawer Locking Piece
203.000
49
TRIOMAX
Cabinet Profile Fixing Positions
Fixing onto cabinetA Chipboard Screws 4 x 15 B Euro Screws Article No. 360.145
A B
96
37
270mm
128
37
350mm
128
37
400mm
32
192
37
450mm
32
192
37
500mm
32
224
37
550mm5
Front fixing hole at 37mm from edgeStandard Drawer The 3rd hole on the cabinet profile should be used to affix the profile to the cabinet. Inner Drawer37
37
The 2nd hole on the cabinet profile should be used to affix the profile to the cabinet.
Front fixing hole at 28mm from edgeStandard Drawer28
The 2nd hole on the cabinet profile should be used to affix the profile to the cabinet.
Inner28 Drawer28
The 1st hole on the cabinet profile should be used to affix the profile to the cabinet.
50
TRIOMAX
Organiseplus Cutlery Trays & Utensil Dividers Space Planning
88
265
109 64
400Example Cabinet width Side panel thickness Tray & Divider set : 600mm : 16mm : RCI.50T4.SS
X
39
Internal Cabinet Width = 600mm - (16mm x 2) - 1mm = 567mm X = Internal Cabinet Width - 400mm - 39mm =128mm
51
TRIOMAX
Assembly, Removal and AdjustmentDrawer S, T Assembly - Wooden Back
4 1 2
5
3
Drawer MS, MT, HS Assembly - Wooden Back5
2
4
1 3
Drawer Assembly - Steel Back
2
3
1
Drawer Front Assembly and RemovalScrew-on Expansion
2 1 1 2 Assembly 'Click' Removal 1
52
TRIOMAXScrew-on
Assembly, Removal and AdjustmentRailing AssemblyExpansion 2 1 1 3 4
Side Extend Assembly
1
2
Sink Cabinet Drawer Assembly
5 4 1 2
3
6
9
7
8
53
TRIOMAXDrawer Insertion
Assembly, Removal and Adjustment
2 1 3
'Click'Door Buffer
Drawer Removal
2 1
3
Drawer Front - Side Adjustment
2
3 + _ 1.5mm
4 1 'Click'
Drawer Front - Height And Tilt Adjustment
+ 1.8mm _
1 2
half turn
1 1
2 Hand Supporting Panel Tighten
3 Tilt Adjustment
Height Adjustment
54
TRIOMAX
Assembly, Removal and AdjustmentInner Drawer S Assembly / Removal
2
1
2
min 30mm 1
Assembly
Removal
Inner Drawer Side Extend HS Assemblyremove
3 3 1
5
4 4
2
Inner Drawer Double Railing HS Assemblyremove
4 3 2
5
6 6
3 1
3
Inner Drawer Locking Piece
Standard Drawer Locking Piece
Space Requirements
1
2
7mm
min 10mm
55
Organiseplus
Assembly, Removal and AdjustmentCutlery Trays and Utensil Dividers
1
2
3
Utensil Cross Divider Position Adjustment
3 1 2
Divider Panel and Lateral Divider Assembly
3 2 1
4 4 1 2
Divider Railing / Filing Cross Hanging Rail Assembly
Colour Code XX Standard : 01 - R9010 White 22 - R9006 Grey Metallic 24 - R7037 Dust Grey Available upon request : 02 - R9001 Cream 21 - R7004 Grey 27 - Anthracite
56
TRIOMAX
Marking DevicesDrawer Front Marking Jigs
Article No. RMD.91130.25 Included 6 Marking pins
Application
Railing Marking TemplateFor marking single and double railing
Article No. RMD.92130.25
Application
57
TRIOMAXDrilling JigDrilling TemplateFor drilling or marking bottom panel and back panel
Article No. RMD.93000.25 Included one 5mm marking pin and one 5mm stop collar Application
Back panel - S Height
232 32 6932 32
1 3
53
20 32
32
32
Back panel - M Height 3 2
1
20 32 32
4
Back panel - H Height 3 2
120
32 32 32
4
Bottom panel 1
3 29 53
58
TRIOMAXKnock In ToolKnock In ToolFor manual installation of Triomax Press In Front Fixing Brackets RBF.22030.NA
Article No. RME.95131.25
Application
59
TRIOMAX
Assembly Devices - Drawer Assembly JigAssembly Jig
Article No. RMM.98030.AL
Designed for TD36 and TD38 drawer assembly Drawer side lengths 270 to 550 mm Cabinet widths 275 to 1200 mm Maximum back panel height of 210mm
Application
1
2
Setting desired drawer length and width.
Insert back and bottom panels. Slide in drawer sides. Activate locking clamps to hold drawer together.
3
4
Secure bottom panel using screws or integrated spikes.
Secure back panel using screws.
60
Aksesori Setia Sdn.Bhd.Company No. 326521-U
Plot 32, Lengkok Rishah 1, Kawasan Perindustrian Silibin, 30100 Ipoh, Perak, Malaysia. Tel Fax : (60) 5 - 527 6055 : (60) 5 - 527 6063
E-mail : [email protected] www.harn.com
ISO 9001
BUREAU VERITASCertification
7007EN.06.09 Printed in Malaysia June 2009
Subject to technical modifications and changes to the range without notice.