tropospheric no2 ronald van der a, michel van roozendael, isabelle de smedt, ruud dirksen, folkert...
TRANSCRIPT
Tropospheric NO2
Ronald van der A, Michel Van Roozendael, Isabelle De Smedt, Ruud Dirksen, Folkert Boersma
KNMI and BIRA-IASB
Beijing, October 2008
Tropospheric NO2
Tropospheric NO2 from satellite measurements
• Observed total slant column• Subtract stratospheric part (model)• Convert slant column into vertical column (air mass factor, RT)
Surface
Stratospheric NO2
CloudTropospheric NO2
Retrieval approach
• CTM (TM4) Assimilation fed by satellite measurements (unpolluted pixels only) and ECMWF data gives:
•Estimation of stratospheric column
•A priori NO2 profile AMFtrop
• Surface albedo + cloud info + a priori profile AMFtrop
• Measured column + stratospheric column + AMFtrop
Tropospheric NO2 column
trop
stratobstrop AMF
SSV
GOME
• Archive: Apr. 1996 - Jul. 2003
• Format: HDF4• Local time: 10.30• Monthly mean files
– TOMS ASCII-format– ESRI grid format
• Pixel size: 320x80 km
SCIAMACHY• version 1.1: July 2002 till today
• Format: HDF4
• Local time: 10.00• Monthly mean files:
– TOMS ASCII-format– ESRI grid format– Regional images
• Pixel size is 60x30 km
OMI
• version 1.1: October 2004 till today
• Local time: 13.30• Format: HDF5-EOS• Monthly mean files
– TOMS ASCII-format– ESRI grid format
• Pixel size: > 24x12 km
GOME-2
• Data available: April 2007 till today
• Local time: 09.30• Format: HDF5• Monthly mean files
– TOMS ASCII-format– ESRI grid format
• Pixel size: 30x60 km
Trend in tropospheric NO2 (1996-2006)
Trends with 95% confidence criterium
Trends in China
2003 2006
Trendvan der A et al., J. Geophys. Res., 111, 2006
Sources of tropospheric NO2
• NOx sources:– Anthropogenic (traffic, industry, power plants)– Soil emissions (grasslands, induced by rain)– Biomass burning (tropics, dry season)– Lightning (tropics)
• Phase shift to identify sources:– Anthropogenic winter maximum– Soil emissions summer maximum, rainfall– Biomass burning dry season – Lightning -
Observed NO2 timeseries(monthly means 1996-2006)
Anthropogenic (Tehran) Biomass burning Ghana (10°N,0°)
Soil West-China (40°N,100°E)
Month of maximum NO2
GOME/SCIAMACHY TM model
OMI
Concurrent measurements of tropospheric NO2 from OMI and SCIAMACHY
• Retrieved with common, consistent algorithm
• Collocated, cloud-free measurements at common grid (0.5°x0.5°)
• Differences large over source regions, and larger than combined errors
• Differences in spectra (slant columns) and in AMF (profile shape)
10:00 hrs SCIAMACHY
13:40 hrs OMI
August 2006
What does GEOS-Chem simulate?
Relative decrease in NO2 column from 10am to 1:30 pm
Observed GEOS-Chem
US: -16% -28%
EU: -6% -13%
China: -26% -22%
Summary Tropospheric NO2
GOME/SCIAMACHY NO2 data available for 1996-today, allowing trend analysis.
OMI data and GOME-2 is also available now.
Monitoring of China with SCIAMACHY/GOME-2 (overpass at 10.00/9.30 AM ) and OMI (overpass at 13.30 PM)
Overpass files for OMI pixels within 100 km from station.
GOME tropospheric O3 columns
R. van der A, J. de Laat,
J. van Peet, O. Tuinder
(KNMI)
Measuring tropospheric O3 column from space
- air pollution/air quality & greenhouse gas
- Stratosphere > 90 % of total O3 column- Troposphere < 10 % of total O3 column
- Tropospheric O3 is highly variable in space and time:
- Global: - in situ production (tropics and extra-tropics)
- complex chemistry
- Extratropics: - Stratosphere-troposphere exchange
- Tropopause height variations
- Clouds, aerosols (interpretation)
Limited height information
[Degrees of Freedom for Signal]
About 5 independent pieces of vertical
information Smoothing of actual profile !!
about 1 piece of tropospheric information [cf. Liu et al., JGR, 2005]
separate troposphere – stratosphere !!!
Directly measuring tropospheric O3 from space:
GOME OPERA algorithm (Ozone ProfilE Retrieval Algorithm)
Tuinder, van der A, van Oss, Mijling [KNMI]
Non-linear Optimal Estimation [Rodgers], iterative, use of a-priori
Courtesy J. Landgraf, SRON
New approach: data assimilation
Determine SOC by assimilating OPERA O3 profiles using CTM (TM5)
Then: TTOC = TOC - SOC
Advantages:
- No gaps in SOC internal consistency- Better solution for “smoothing error”- Internally consistent tropopause- different O3 (profile) measurements can be used and even combined
Best available estimate of SOC
This figure was originally published in Liu et al. [JGR, 2006]. The upper panel shows the tropospheric O3 columns from GOME O3 profiles for a region over Indonesia in 1997 (7S, 110-125E). Added are also results from a chemistry-transport model calculation (GEOS-CHEM) with realistic emissions and nearby O3 sonde measurements. The lower panel is for a region over the central Pacific.
Added are the black lines: the GOME TOC values from the KNMI OPERA algorithm.
Algorithm development and current status• Assimilation system/algorithm development
– Several problems in the system and algorithm – hampering long assimilation runs – were detected
– Slow progress of solving problems due to long duration of assimilation runs to test stability
– In the mean time …• OPERA algorithm was also considerably improved (Tuinder and Mijling)• New linearized strat. O3 chemistry scheme published
• Current status– Stable assimilation algorithm– Period 1996 to 2001 is available– Height depend error propagation in the assimilation included
Tropospheric Ozone data
GOME tropospheric columns: Data set complete Low resolution => low quality Small improvements possible
GOME-2 tropospheric columns: Data set not available yet High quality Long processing time
GOME-2 tropospheric profiles: Data set is available Data can is difficult to interpret: averaging kernel and a-priori
profile needed
End
Scheme of source identification
Anthropogenic Winter maximum
(outside tropics)
Low variability
Biomass Winter/Spring maximum High variability
Soil Summer maximum High variability
Lightning NO2 (above clouds) > NO2(clear-sky)
Source identification
van der A et al., JGR, 2008