tru & tru pc self-leveling - runyon surface prep...aggregates to create numerous design...
TRANSCRIPT
TRU PRICING1-50 bags: $33/bag
51-150 bags: $32/bag151-250 bags: $31/bag
251+: $30/bag
$240
Gauge Rakes & Cam Sets
$35
$200
TRU & TRU PC Self-Leveling
www.runyonsurfaceprep.com 800.896.8665 Indiana & California Locations
TRU Self-Leveling
KEY INFORMATION: High Performance Architectural Toppings
HIGHLIGHTSDecorativeDesigned specifically for polishing and decorative flooring applications
Outstanding Clarity & GlossHighly polishable due to low polymer content and high density
VersatileUse as a topping, resurfacer or underlayment, incorporate colors and aggregates to create numerous design possibilities
High Strength• 5000 psi (34.5 MPa) in 24 hours• 6500 psi (44.8 MPa) in 28 days
Interior/ExteriorDurable in dry and wet areas
TRU PC Polished Concrete
TRU PC PRICING1-50 bags: $39.75/bag
51-150 bags: $37.75/bag151-250 bags: $35.75/bag
251+: $33/bag
PRIMING• As a decorative topping, TXP epoxy primer with sand broadcast to refusal• Not decorative topping, Acrylic Primer
MIXING• Add 1 bag of TRU to 4.5 qts of clean, potable water• Mix 3 to 5 minutes until the mixture is smooth and lump-free
PLACEMENTPlace at minimum of 3/8” thickness, depending on flatness of the substrate
YIELD50-lb bag coverage @ 3/8” is 15-16 sq ft
PHYSICAL DATA• Working Time: 30 min• Flow Time: 15 min
FAST TRACK• Foot traffic in 2 to 3 hours• Coatings in 12 hours• Grind and polish in 24 hours
PRIMINGUse TXP epoxy primer with sand broadcast to refusal
MIXING• Add 1 bag of TRU PC to 3.75-4 qts of potable water• Polished floors: use less water - start with 3.75 qts•Add measured water to mix container - add TRU PC while mixer is running• Additional water may be added if needed. Do not exceed 4.25 qts / bag
PLACEMENTPlace at minimum of 3/8” thickness, depending on flatness of the substrate
YIELD60-lb bag coverage @ 3/8” is 16 sq ft
PHYSICAL DATA• Working Time: 20 min• Flow Time: 15 min
FAST TRACK• Foot traffic in 2 to 3 hours• Grind in 24 hours• Coatings in 12 hours
Bucket Strainer Porcupine RollerTRU SUPPLIES
Spiked Shoeswith blunt spikes
TRU & TRU PC SUPPLIES $79.99
HIGHLIGHTSPolished Concrete AppearanceA high-flow topping that simulates polished concrete
Outstanding Clarity & GlossHighly polishable due to low polymer content and high density
VersatileUse as a topping, resurfacer or underlayment, incorporate colors and aggregates to create numerous design possibilities
High Strength• 5000 psi (34.5 MPa) in 24 hours• 7000 psi (48.3 MPa) in 28 days
Interior/ExteriorDurable in dry and wet areas
TXP TRUEpoxy Primer
for use with TRU & TRU PC
$355
Acrylic Primer
1 gallon unit
$36.75
PORTAMIX MEGA HIPPOPMH 80F-RL
$2150
PORTAMIX MEGA HIPPOPMH 80X-RL
PORTAMIX Pelican Cart
PMP 80$525$2250
BARREL CART
PATCHING TRU: You can’t prime the hole because it’ll leave a ring of primer around the hole. So clean it out, get down to the hard stuff (no loose stuff), wet the hole really good like doing a Cement All patch, and blow out extra water. Use tape to surround the hole so that the extra TRU doesn’t get on the polished concrete. Pour it in there - you want a lot of the sand, not the cream, so don’t mix the TRU really wet. Pour it a little higher than the rest of the floor to make sure that when you grind it off, you’re cutting down to the sand.