tube guards · the newest family of linear fluorescent lamps is the t5 line of lamps, with this...

3
Tube Guards B ERGEN INDUSTRIES www.bergeninc.com 800-875-1846 Lighting Job Sites For Over 35 Years Ordering Information Cost effective alternative to coated lamps Easy to use: Simply slip over fluorescent tube for instant protection Unbreakable Reusable time & time again Available in a wide range of sizes & colors ----FDA Food Code Chapter 6, Section 202.11 There is an endless list of industries where protective lighting should be used: meat packing, beverage plants, metal fabrication, textile plants, paper mills, printing plants, supermarkets, medical facilities, museums, mines, cleanrooms, amusement parks, computer facilities, metal-free environments, elevators, insect light traps, etc., etc. BERGEN'S re-usable Tube Guards encase existing fluorescent tubes up to 1500 MA* to insulate and improve lighting efficiency at low temperatures. The high tensile strength of the polycarbonate protects people, equipment & products. All Bergen Tube Guards meet OSHA, FDA and USDA requirements. Each case of Tube Guards provides end caps which give a snug fit between lamp and sleeve, while the release channel allowes gases to escape. 12 T ***Tube Guards 60" and longer are considered oversize by UPS and are subject to additional shipping charges*** **Color Add Code 01 - Purple 02 - Royal Blue 03 - Smoke 04 - Yellow 05 - Amber 06 - Red 07 - Blue 08 - Pink 09 - Green POLYCARBONATE - CLEAR BERGEN PART# DESCRIPTION UNIT CARTON FG-20 T-12 2' TUBE GUARD WITH END CAPS CLEAR 24 FG-30 T-12 3' TUBE GUARD WITH END CAPS CLEAR 24 FG-40 T-12 4' TUBE GUARD WITH END CAPS CLEAR 24 FG-60 T-12 5' TUBE GUARD WITH END CAPS CLEAR 24 FG-72 T-12 6' TUBE GUARD WITH END CAPS CLEAR 24 FG-96 T-12 8' TUBE GUARD WITH END CAPS CLEAR 24 POLYCARBONATE - COLORS BERGEN PART# DESCRIPTION UNIT CARTON FG-20* T-12 2' TUBE GUARD WITH END CAPS (Add Code) 24 FG-30* T-12 3' TUBE GUARD WITH END CAPS (Add Code) 24 FG-40* T-12 4' TUBE GUARD WITH END CAPS (Add Code) 24 FG-60* T-12 5' TUBE GUARD WITH END CAPS (Add Code) 24 FG-72* T-12 6' TUBE GUARD WITH END CAPS (Add Code) 24 FG-96* T-12 8' TUBE GUARD WITH END CAPS (Add Code) 24

Upload: others

Post on 25-Jul-2020

1 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: Tube Guards · The newest family of linear fluorescent lamps is the T5 line of lamps, with this also comes a demand for T5 TUBE GUARDS. Bergen manufactures a full line of T5 Tube

Tube Guards

BERGENINDUSTRIESwww.bergeninc.com 800-875-1846

Lighting Job Sites For Over 35 Years

Ordering Information

Cost effective alternative to coated lampsEasy to use: Simply slip over fluorescent tube for instant protectionUnbreakableReusable time & time againAvailable in a wide range of sizes & colors

----FDA Food Code Chapter 6, Section 202.11There is an endless list of industries where protective lighting should be used: meat packing, beverage plants, metal fabrication, textile plants,paper mills, printing plants, supermarkets, medical facilities, museums,mines, cleanrooms, amusement parks, computer facilities, metal-freeenvironments, elevators, insect light traps, etc., etc.

BERGEN'S re-usable Tube Guards encase existing fluorescent tubes up to 1500 MA* to insulate and improve lighting efficiency at low temperatures. The high tensile strength of the polycarbonate protects people, equipment & products. All Bergen Tube Guardsmeet OSHA, FDA and USDA requirements. Each case of Tube Guards provides end caps which give a snug fit between lamp andsleeve, while the release channel allowes gases to escape.

12 T

***Tube Guards 60" and longer are considered oversize by UPS and are subject to additional shipping charges***

**Color Add Code01 - Purple02 - Royal Blue03 - Smoke04 - Yellow05 - Amber06 - Red07 - Blue08 - Pink09 - Green

POLYCARBONATE - CLEAR

BERGEN PART# DESCRIPTION UNIT CARTON

FG-20 T-12 2' TUBE GUARD WITH END CAPS CLEAR 24FG-30 T-12 3' TUBE GUARD WITH END CAPS CLEAR 24FG-40 T-12 4' TUBE GUARD WITH END CAPS CLEAR 24FG-60 T-12 5' TUBE GUARD WITH END CAPS CLEAR 24FG-72 T-12 6' TUBE GUARD WITH END CAPS CLEAR 24FG-96 T-12 8' TUBE GUARD WITH END CAPS CLEAR 24

POLYCARBONATE - COLORS

BERGEN PART# DESCRIPTION UNIT CARTON

FG-20* T-12 2' TUBE GUARD WITH END CAPS (Add Code) 24FG-30* T-12 3' TUBE GUARD WITH END CAPS (Add Code) 24FG-40* T-12 4' TUBE GUARD WITH END CAPS (Add Code) 24FG-60* T-12 5' TUBE GUARD WITH END CAPS (Add Code) 24FG-72* T-12 6' TUBE GUARD WITH END CAPS (Add Code) 24FG-96* T-12 8' TUBE GUARD WITH END CAPS (Add Code) 24

Page 2: Tube Guards · The newest family of linear fluorescent lamps is the T5 line of lamps, with this also comes a demand for T5 TUBE GUARDS. Bergen manufactures a full line of T5 Tube

Tube Guards T-5

BERGENINDUSTRIESwww.bergeninc.com 800-875-1846

Lighting Job Sites For Over 35 Years

*Uses:Food Preparations AreasCommercial KitchensDeli AreasPublic Use AreasChanging Fluorescent Lamp Colors

*Uses:MuseumsArt GalleriesClothing StoresLibrariesSpecial Use Areas

Think of BERGEN for all your UV Tube Guard applicationsT-12, T-8 & T-5 Sizes

"Efficiency” continues to be the buzzword in the lighting industry, and as its use continues to grow, the lamps used to meet its demands continue to get smaller. The smaller-is-better trend has been particularly evident in the fluorescent lamp market as manufacturers have consistently decreased sizes since the days of the standard T12 lamp.

The newest family of linear fluorescent lamps is the T5 line of lamps, with this also comes a demandfor T5 TUBE GUARDS. Bergen manufactures a full line of T5 Tube Guards along with T12, T8, UV &Matrix. Colors include: Red, Blue, Green, Yellow, Purple, Smoke, Pink, Royal Blue and Amber.

IN STOCK

Next day delivery in some areas

Note: Bergen Industries does not recommend the use of tube guards on High Output lamps with conditions that includesurface lamp temperature that can exceed 200 degrees For in enclosed fixtures where normal venting is prohibited. T5 tubeguards are safe to use in conjunction with electronichigh efficiency ballast designed to prevent overheating of thelamp during use & at "end of life". T5 tubeguards are NOT recommended for use with dimmingsystems or applications in which power surges or spikes cancause arcing or over-burning of lamps.

Page 3: Tube Guards · The newest family of linear fluorescent lamps is the T5 line of lamps, with this also comes a demand for T5 TUBE GUARDS. Bergen manufactures a full line of T5 Tube

Tube Guards

BERGENINDUSTRIESwww.bergeninc.com 800-875-1846

Lighting Job Sites For Over 35 Years

Ordering Information

8 T

5 T

V

U

MATRIX

***Tube Guards 60" and longer are considered oversize by UPS and are subject to additional shipping charges***

POLYCARBONATE - CLEAR

BERGEN PART# DESCRIPTION UNIT CARTON

FG-208 T-8 2' TUBE GUARD WITH END CAPS CLEAR 24FG-308 T-8 3' TUBE GUARD WITH END CAPS CLEAR 24FG-408 T-8 4' TUBE GUARD WITH END CAPS CLEAR 24FG-608 T-8 5' TUBE GUARD WITH END CAPS CLEAR 24FG-728 T-8 6' TUBE GUARD WITH END CAPS CLEAR 24FG-968 T-8 8' TUBE GUARD WITH END CAPS CLEAR 24

POLYCARBONATE - COLORS

BERGEN PART# DESCRIPTION UNIT CARTON

FG-208* T-8 2' TUBE GUARD WITH END CAPS (Add Code) 24FG-308* T-8 3' TUBE GUARD WITH END CAPS (Add Code) 24FG-408* T-8 4' TUBE GUARD WITH END CAPS (Add Code) 24FG-608* T-8 5' TUBE GUARD WITH END CAPS (Add Code) 24FG-728* T-8 6' TUBE GUARD WITH END CAPS (Add Code) 24FG-968* T-8 8' TUBE GUARD WITH END CAPS (Add Code) 24

POLYCARBONATE - MATRIX

BERGEN PART# DESCRIPTION UNIT CARTON

FG-408M T-8 4' DOT MATRIX LIGHT REDUCING SLEEVE 24FG-40M T-12 4' DOT MATRIX LIGHT REDUCING SLEEVE 24FG-968M T-8 8' DOT MATRIX LIGHT REDUCING SLEEVE 24FG-96M T-12 8' DOT MATRIX LIGHT REDUCING SLEEVE 24

ACRYLIC UV - CLEAR

BERGEN PART# DESCRIPTION UNIT CARTON

FG-408UV T-8 4' TUBE GUARD UV PROTECTION CLEAR 24FG-40UV T-12 4' TUBE GUARD UV PROTECTION CLEAR 24FG-405UV T-5 4' TUBE GUARD UV PROTECTION CLEAR 125FG-96UV T-12 8' TUBE GUARD UV PROTECTION CLEAR 24FG-968UV T-8 8' TUBE GUARD UV PROTECTION CLEAR 24

ACRYLIC UV - AMBER

BERGEN PART# DESCRIPTION UNIT CARTON

FG-408UVA T-8 4' TUBE GUARD UV PROTECTION AMBER 24FG-40UVA T-12 4' TUBE GUARD UV PROTECTION AMBER 24FG-96UVA T-12 8' TUBE GUARD UV PROTECTION AMBER 24FG-968UVA T-8 8' TUBE GUARD UV PROTECTION AMBER 24

POLYCARBONATE - CLEAR & COLORS

BERGEN PART# DESCRIPTION UNIT CARTON

FG-405 T-5 4' TUBE GUARD WITH END CAPS CLEAR 125FG-405* T-5 4' TUBE GUARD WITH END CAPS (Add Code) 125