tuesday, june 2, oral presentations - energy.gov · 2020-04-14 · venkat srinivasan, anl bat393:...
TRANSCRIPT
Time Advanced Combustion Engines (ACE) Technology Integration (TI)
10:00
AM
10:15
AM
10:30
AM
10:45
AM
11:00
AM
11:15
AM
11:30
AM
11:45
AM
12:00
PM
12:15
PM
12:30
PM
1:00 PM
1:15 PM
1:30 PM
1:45 PM
2:00 PM
2:15 PM
TI920: Technology Integration (TI) Project Overview
Mark Smith, DOE
TI091: Solutions for Curbside-Charging Electric Vehicles Planned for Urban
Growth
Robert Cox, University of North Carolina at Charlotte
TI092: Multi-Unit Dwelling Plug-In Electric Vehicle Charging Innovation
Pilots in Multiple Metropolitan Areas
Kevin Wood, Center for Sustainable Energy
TI093: Electric Vehicle Supply Equipment (EVSE) Innovation: Streetlight
Charging in City Right-Of-Way
Miriam Bouallegue, Metropolitan Energy Center
TI094: Advanced Transportation Hub Efficiency using Novel Analysis
(ATHENA)
Caleb Phillips, NREL
TI095: High-Performance Computing (HPC) for O'Hare Hub
Aymeric Rousseau, ANL
TI096: Technology Integration to Gain Commercial Efficiency for the Urban
Goods Delivery System
Anne Goodchild, University of Washington
TI097: Drones, Delivery Robots, Driverless Cars, and Intelligent Curbs for
Increasing Energy Productivity of First-/Last-Mile Goods Movement
Agreement
Constantine Samaras, Carnegie Mellon University
ACE138: Partnership for Advanced Combustion Engines (PACE) - A Light-
Duty National Laboratory Combustion Consortium
Paul Miles, SNL
ACE139: Development of an Optimized Gasoline Surrogate Formulation for
PACE Experiments and Simulations
Scott Wagnon, LLNL
ACE140: Improved Chemical Kinetics and Algorithms for More Accurate,
Faster Simulations
Russell Whitesides, LLNL
Tuesday, June 2, Oral Presentations
ACE141: Advanced Ignition System Fundamentals
Isaac Ekoto, SNL
ACE142: Development and Validation of Simulation Tools for Advanced
Ignition Systems
Riccardo Scarcelli, ANL
Lunch Break
ACE143: Fuel Injection and Spray Research
Chris Powell, ANL
ACE144: Spray Wall Interactions and Soot Formation
Lyle Pickett, SNL
ACE146: Direct Numerical Simulation (DNS) and High-Fidelity Large-Eddy
Simulation (LES) for Improved Prediction of In-Cylinder Flow and
Combustion Processes
Muhsin Ameen, ANL
Time Advanced Combustion Engines (ACE) Technology Integration (TI)
Tuesday, June 2, Oral Presentations
2:30 PM
3:00 PM
3:15 PM
3:30 PM
3:45 PM
4:00 PM
4:15 PM
4:30 PM
5:00 PM
5:15 PM
5:30 PM
ACE150: Enabling Low-Temperature Plasma (LTP) Ignition Technologies for
Multi-Mode Engines through the Development of a Validated High-Fidelity
LTP Model for Predictive Simulation Tools
Nick Tsolas, Auburn University
5:45 PM
ACE151: Hierarchically Informed Engineering Models for Predictive
Modeling of Turbulent Premixed Flame Propagation in Pre-Chamber
Turbulent Jet Ignition
Haifend Wang, Purdue University
6:00 PM
ACE152: Development of High-Fidelity and Efficient Modeling Capabilities
for Enabling Co-Optimization of Fuels and Multi-Mode Engines
Matthiaas Ihme, Stanford University
6:15 PM
6:30 PM
6:45 PM
ACE145: More Accurate Modeling of Heat Transfer in Internal Combustion
Engines
K. Dean Edwards, ORNL
TI098: Transportation Energy Analytics Dashboard (TEAD)
Michael Park, University of Maryland
TI099: Understanding and Improving Energy Efficiency of Regional Mobility
Systems by Leveraging System-Level Data
Zhen (Sean) Qian, Carnegie Mellon University
TI100: High-Dimensional, Data-Driven Energy Optimization for Multi-Modal
Transit Agencies
Philip Pugliese, Chattanooga Area Regional Transit Authority
TI101: Mobility and Energy Improvements Realized through Prediction-
Based Vehicle Powertrain Control and Traffic Management
Thomas Bradley, Colorado State University
ACE147: Mitigation of Knock and Low-Speed Pre-Ignition (LSPI) for High-
Power Density Engines
Jim Szybist, ORNL
ACE148: Overcoming Barriers for Dilute Combustion
Brian Kaul, ORNL
Break
Break
ACE149: Cold-Start Physics and Chemistry in Combustion Systems for
Emissions Reduction
Scott Curran, ORNL
TI103: Fuel-Efficient Platooning in Mixed Traffic Highway Environments
Jeff Rupp, American Center for Mobility
TI102: Advancing Platooning with Advanced Driver-Assistance Systems
Control Integration and Assessment
Hoseinali Borhan, Cummins
Time Advanced Combustion Engines (ACE) Technology Integration (TI)
Tuesday, June 2, Oral Presentations
Time
10:00
AM
10:15
AM
10:30
AM
10:45
AM
11:00
AM
11:15
AM
11:30
AM
11:45
AM
12:00
PM
12:15
PM
12:30
PM
1:00 PM
1:15 PM
1:30 PM
1:45 PM
2:00 PM
2:15 PM
Vehicle Technologies Analysis (VAN) Electrification Technologies (ELT)
Tuesday, June 2, Oral Presentations
ELT209: High-Voltage, High-Power Density Traction-Drive Inverter
Gui-Jia Su, ORNL
ELT211: Power Electronics Thermal Management
Gilbert Moreno, NREL
ELT089: Assessing the North American Supply Chain for Traction-Drive
Inverters, Motors, and Batteries for Class 3-8 Hybrid Electric and Plug-In
Electric Commercial Vehicles
Chris Whaling, Synthesis Partners
ELT208: Highly Integrated Power Module
Emre Gurpinar, ORNL
ELT210: Development of Next-Generation Vertical Gallium-Nitride Devices
for High-Power Density Electric Drivetrain
Greg Pickrell, SNL
ELT212: Non-Heavy Rare-Earth High-Speed Motors
Tsarafidy Raminosoa, ORNL
ELT213: High-Fidelity Multiphysics Material Models for Electric Motors
Jason Pries, ORNL
Lunch Break
Time
2:30 PM
3:00 PM
3:15 PM
3:30 PM
3:45 PM
4:00 PM
4:15 PM
4:30 PM
5:00 PM
5:15 PM
5:30 PM
5:45 PM
6:00 PM
6:15 PM
6:30 PM
6:45 PM
Vehicle Technologies Analysis (VAN) Electrification Technologies (ELT)
Tuesday, June 2, Oral Presentations
VAN032: Tracking the Evolution of Electric Vehicles and New Mobility
Technology
Joann (Yan) Zhou, ANL
VAN033: Transportation Macroeconomic Accounting Models: VISION and
Non-Light Duty Energy and Greenhouse Gas (GHG) Emissions Accounting
Tool (NEAT)
Joann (Yan) Zhou, ANL
Panel Discussion
ELT214: Electric Motor Thermal Management
Kevin Bennion, NREL
VAN920: Overview of VTO Analysis Program
Jacob Ward, DOE
VAN016: Transportation Data Program
Stacy Davis, ORNL
ELT215: Permanent Magnets without Critical Rare Earths to Enable Electric
Drive Motors with Exceptional Power Density
Iver Anderson, Ames Laboratory
Break
Break
VAN017: ANL VTO Analysis Modeling Program
Michael Wang, ANL
VAN023: Assessing Energy and Cost Impact of Advanced Vehicle
Technologies
Aymeric Rousseau, ANL
VAN018: Light-Duty Vehicle Choice Modeling and Benefits Analysis
Aaron Brooker, NREL
ELT216: Isotropic, Bottom-Up Soft Magnetic Composites for Rotating
Machines
Todd Monson, SNL
Time Vehicle Technologies Analysis (VAN) Electrification Technologies (ELT)
Tuesday, June 2, Oral Presentations
Time
10:00
AM
10:15
AM
10:30
AM
10:45
AM
11:00
AM
11:15
AM
11:30
AM
11:45
AM
12:00
PM
12:15
PM
12:30
PM
1:00 PM
1:15 PM
1:30 PM
1:45 PM
2:00 PM
2:15 PM
Materials Technology (MAT) Battery R&D (BAT) Energy-Efficient Mobility Systems (EEMS)
BAT343: Silicon and Intermetallic Anode Portfolio
Strategy Overview
Brian Cunningham, DOE
MAT166: Aluminum Purification and Magnesium
Recovery from Magnesium-Aluminum Scrap
John Hryn, ANL
MAT150: Low-Cost Corrosion Protection for
Magnesium
Aashish Rohatgi, PNNL
MAT158: Overcoming the Barriers to
Lightweighting by Enabling Low-Cost and High-
Performance Structural Automotive Aluminum
Castings
Aashish Rohatgi, PNNL
MAT126: Room-Temperature Stamping of High-
Strength Aluminum Alloys
Aashish Rohatgi, PNNL
MAT142: Metal-Matrix Composite Brakes Using
Titanium Diboride
Glenn Grant, PNNL
MAT134: Assembly of Dissimilar Aluminum Alloys
for Automotive Applications
Piyush Upadhyay, PNNL
EEMS013: ANL Core Tools--Simulation
Aymeric Rousseau, ANL
EEMS041: ANL Core Tools--Hardware
Kevin Stutenberg, ANL
EEMS067: Virtual and Physical Proving Ground for
Development and Validation of Future Mobility
Technologies
Dean Deter, ORNL
EEMS066: Livewire Data Platform--A Solution for
Energy Efficient Mobility Systems (EEMS) Data
Sharing
Lauren Spath Luhring, NREL
EEMS069: Next-Generation Intelligent Traffic
Signal for Multimodal, Shared, and Automated
Future
Andrew Powch, Xtelligent
BAT436: Silicon Electrolyte Interface Stabilization
(SEISTA): Update and Overview
Tony Burrell, NREL
BAT437: Silicon Electrolyte Interface Stabilization
(SEISTA): Electrochemical Methods
Robert Kostecki, LBNL
BAT438: Silicon Electrolyte Interface Stabilization
(SEISTA): Advanced Characterization
Glen Teeter, NREL
MAT127: U.S. Automotive Materials Partnership
Low-Cost Magnesium Sheet Component
Development and Demonstration Project
Randy Gerken, Fiat Chrysler Automotive
MAT149: Non-Rare Earth Magnesium Bumper
Beams
Scott Whalen, PNNL
EEMS061: Real-Time Data and Simulation for
Optimizing Regional Mobility in the United States
Jibonananda Sanyal, ORNL
EEMS037: High-Performance Computing (HPC)
and Big Data Solutions for Mobility Design and
Planning
Jane MacFarlane, LBNL
EEMS062: Deep-Learning for Connected and
Automated Vehicle (CAV) Development
Robert Patton, ORNL
BAT388: Silicon Deep Dive: Update and Overview
Jack Vaughey, ANL
BAT439: Silicon Deep Dive: Silicon-Based Slurries
and Electrodes
Beth Armstrong, ORNL
BAT440: Silicon Deep Dive: Silicon
Functionalization
Zhengcheng Zhang, ANL
Tuesday, June 2, Oral Presentations
Silicon Electrolyte Interface Stabilization (SEISTA):
Roundtable - Question & Answer
Lunch Break
Time
2:30 PM
3:00 PM
3:15 PM
3:30 PM
3:45 PM
4:00 PM
4:15 PM
4:30 PM
5:00 PM
5:15 PM
5:30 PM
5:45 PM
6:00 PM
6:15 PM
6:30 PM
6:45 PM
Materials Technology (MAT) Battery R&D (BAT) Energy-Efficient Mobility Systems (EEMS)
Tuesday, June 2, Oral Presentations
BAT394: Highly Ordered Hierarchical Anodes for
Extreme Fast-Charging Batteries
Neil Dasgupta, University of Michigan
EEMS084: Energy-Efficient Maneuvering of
connected and Automated Vehicles (CAVs) with
Situational Awareness at Intersections
Sankar Rengarajan, Southwest Research Institute
EEMS085: Overview of Key Insights from SMART
Mobility 1.0
David Anderson, DOE
EEMS083: CIRCLES:Congestion Impact Reduction
via CAV-in-the-loop Lagrangian Energy Smoothing
Alexandre Bayen, University of California at
Berkeley
BAT392: Enabling Rapid Charging in Lithium-Ion
Batteries via Integrated Acoustofluidics
James Friend, University of California at San Diego
EEMS028: Developing an Eco-Cooperative
Automated Control System (Eco-CAC)
Hesham Rakha, Virginia Tech
EEMS082: Validation of Connected and
Automated Mobility System Modeling and
Simulation
Jeffrey Rupp, American Center for Mobility
MAT167: Corrosion Mechanisms in Magnesium-
Steel Dissimilar Joints
Vineet Joshi, PNNL
MAT136: High-Performance Computing and High-
Throughput Characterizations toward Interfaces-
by-Design for Dissimilar Materials Joining
Xin Sun, ORNL
MAT137: Adhesive Bonding of Carbon-Reinforced
Plastic to Advanced High-Strength Steel
Zhili Feng, ORNL
BAT386: Extreme Fast Charge Cell Evaluation of
Lithium-Ion (XCEL) Batteries
Venkat Srinivasan, ANL
BAT393: Development of an Extreme Fast-
Charging Battery
Chao-Yang Wang, Penn State University
MAT139: Mechanical Joining of Thermoplastic
Carbon-Fiber Reinforced Polymer to Die-Cast
Magnesium
Keerti Kappagantula, PNNL
MAT138: Solid-State Joining of Magnesium Sheet
to High-Strength Steel
Piyush Upadhyay, PNNL
Silicon Deep Dive: Roundtable - Question &
Answer
Break
Break
MAT151: Phase-Field Modeling of Corrosion for
Design of Next-Generation Magnesium-Aluminum
Vehicle Joints
Adam Powell, Worcester Polytechnic Institute
Time Materials Technology (MAT) Battery R&D (BAT) Energy-Efficient Mobility Systems (EEMS)
Tuesday, June 2, Oral Presentations
Time Advanced Combustion Engines (ACE) Technology Integration (TI)
10:00
AM
10:15
AM
10:30
AM
TI104: Using Real-Time Mass Transit in First-/Last-Mile Solution
Crystal Wang, Ford
10:45
AM
TI105: Multi-Modal, Energy-Optimal Trip Scheduling in Real-Time (METS-R)
for Transportation Hubs
Satish Ukkusuri, Purdue University
11:00
AM
11:15
AM
11:30
AM
11:45
AM
12:00
PM
12:15
PM
12:30
PM
1:00 PM
1:15 PM
1:30 PM
1:45 PM
2:00 PM
Wednesday, June 3, Oral Presentations
ACE119: Development and Optimization of a Multi-Functional SCR-DPF
(Diesel Particulate Filter) Aftertreatment System for Heavy-Duty NOx and
Soot Emission Reduction
Ken Rappe, PNNL
ACE118: CLEERS Passive NOx Adsorber (PNA)
Janos Szanyi, PNNL
ACE027: Next-Generation Selective Catalytic Reduction (SCR)-Dosing
System Investigation
Abhijeet Karkamkar, PNNL
ACE022: Joint Development and Coordination of Emissions Control Data
and Models (Cross-cut Lean Exhaust Emissions Reduction Simulations
(CLEERS) Analysis and Coordination)
Josh Pihl, ORNL
ACE023: CLEERS: Fundamentals in Selective Catalytic Reduction (SCR),
Filter, and Protocol
Yong Wang, PNNL
ACE085: Low-Temperature Emission Control to Enable Fuel-Efficient Engine
Commercialization
Todd Toops, ORNL
ACE033: Emission Control for Lean Gasoline Engines
Vitaly Prikhodko, ORNL
ACE153: Chemistry of Cold-Start Emissions and Impact of Emissions Control
Melanie Moses DeBusk, ORNL
Lunch Break
Time Advanced Combustion Engines (ACE) Technology Integration (TI)
Wednesday, June 3, Oral Presentations
2:15 PM
2:30 PM
3:00 PM
3:15 PM
3:30 PM
3:45 PM
4:00 PM
4:15 PM
4:30 PM
5:00 PM
5:15 PM
5:30 PM
5:45 PM
6:00 PM
6:15 PM
6:30 PM
ACE130: Development of Passive Hydrocarbon/NOx Trap Catalysts for Low-
Temperature Gasoline Applications
Mark Crocker, University of Kentucky
ACE129: Design and Optimization of Structured Multi-Functional Trapping
Catalysts for Conversion of Hydrocarbons and NOx from Diesel and
Advanced Combustion Engines
Michael Harold, University of Houston
ACE119: Development and Optimization of a Multi-Functional SCR-DPF
(Diesel Particulate Filter) Aftertreatment System for Heavy-Duty NOx and
Soot Emission Reduction
Ken Rappe, PNNL
ACE056: Low-Temperature Oxidation
Yong Wang, PNNL
ACE032: Cummins-ORNL Emissions Cooperative Research and
Development Agreement (CRADA): NOx Control and Measurement
Technology for Heavy-Duty Diesel Engines, Self-Diagnosing SmartCatalyst
Systems
Bill Partridge, ORNL
ACE128: Reduced Precious Metal Catalysts for Methane and NOx Emission
Control of Natural Gas Vehicles
Michael Harold, University of Houston
Break
Break
Time Advanced Combustion Engines (ACE) Technology Integration (TI)
Wednesday, June 3, Oral Presentations
6:45 PM
Time
10:00
AM
10:15
AM
10:30
AM
10:45
AM
11:00
AM
11:15
AM
11:30
AM
11:45
AM
12:00
PM
12:15
PM
12:30
PM
1:00 PM
1:15 PM
1:30 PM
1:45 PM
2:00 PM
Fuel and Lubricant Technologies (FT) Electrification Technologies (ELT)
Wednesday, June 3, Oral Presentations
ELT202: Charging Infrastructure Technologies: Smart Electric Vehicle
Charging for a Reliable and Resilient Grid (RECHARGE)
Andrew Meintz, NREL
ELT201: Charging Infrastructure Technologies: Smart Vehicle-Grid
Integration--ANL
Keith Hardy, ANL
ELT200: Scalable Electric Vehicle Smart Charging Using Collaborative
Autonomy
Steve Chapin, LLNL
ELT091: Cost-Effective 6.5% Silicon Steel Laminate for Electric Machines
Jun Cui, Iowa State University
FT071: Multi-Mode Operation in Gasoline Direct-Injection Engines: Fuel-
Property Effects and Approaches to Expand the Advanced Compression-
Ignition Range
Toby Rockstroh, ANL
FT072: Multi-Mode: Desired Fuel Properties for Advanced Compression-
Ignition and Spark-Ignition Engine Performance
Chris Kolodziej, ANL
FT073: Co-Optima Emissions and Emissions Control for Spark Ignition and
Advanced Compression Ignition Multi-Mode Combustion
Sreshtha Sinha Majumdar, ORNL
FT067: Multi-Mode/Multi-Mode Compression Ignition : Fuel-Property
Characterization and Prediction
Tim Bays, PNNL
FT088: Fuel Property Experimental Kinetics
Gina Fioroni, NREL
FT069: Multi-Mode: Fuel-Property Impacts and Limitations on Combustion--
Spark Ignition Focus
Derek Splitter, ORNL
FT070: Multi-Mode: From In-Cylinder Combustion Diagnostics to Drive-
Cycle Fuel Economy
Magnus Sjoberg, SNL
ELT257: Directed Electric Charging of Transportation using eXtreme Fast
Charging (XFC) (DIRECT XFC)
Tim Pennington, INL
ELT092: Wound Field and Hybrid Synchronous Machines for Electric
Vehicle Traction with Brushless Capacitive Rotor Field Excitation
Ian Brown, Illinois Institute of Technology
ELT093: High-Speed Hybrid Reluctance Motor with Anisotropic Materials
Edwin Chang, General Motors
FT037: Co-Optimization of Fuels and Engines (Co-Optima)
Robert Wagner, ORNL
Lunch Break
ELT082: Highly Integrated Wide Bandgap Power Module for Next
Generation Plug-In Vehicles
John Czubay, General Motors
Time
2:15 PM
2:30 PM
3:00 PM
3:15 PM
3:30 PM
3:45 PM
4:00 PM
4:15 PM
4:30 PM
5:00 PM
5:15 PM
5:30 PM
5:45 PM
6:00 PM
6:15 PM
6:30 PM
Fuel and Lubricant Technologies (FT) Electrification Technologies (ELT)
Wednesday, June 3, Oral Presentations
FT089: Heavy-Duty Advanced Compression Ignition
John Dec, SNL
ELT189: Electric Truck with Range-Extending Engine (ETREE)
Jesse Dalton, Cummins
ELT190: Medium-Duty Urban Range Extended Connected Powertrain
(MURECP)
Matthew Thorington, Bosch
ELT158: Zero-Emission Cargo Transport II: San Pedro Bay Ports Hybrid &
Fuel-Cell Electric Vehicle Project
Seungbum Ha, SCAQMD
ELT191: Medium-Duty Vehicle Powertrain Electrification and
Demonstration
Wiley McCoy, McLaren
FT073: Co-Optima Emissions and Emissions Control for Spark Ignition and
Advanced Compression Ignition Multi-Mode Combustion
Sreshtha Sinha Majumdar, ORNL
FT074: Multi-Mode: Gasoline Direct-Injection Sprays
Lyle Pickett, SNL
FT075: Multi-Mode: Fuel Kinetics
Bill Pitz, LLNL
FT076: Model-Based Fuel and Engine Optimization
Juliane Mueller, LBNL
FT077: Heavy-Duty Mixed-Controlled Compression Ignition: Fuel Effects
and Ducted Fuel Injection
Charles Mueller, SNL
FT078: Heavy-Duty Mixed-Controlled Compression Ignition: Impacts of Fuel
Properties on Combustion, Injection Characteristics, and Emissions
Controls
Martin Wissink, ORNL
ELT257: Directed Electric Charging of Transportation using eXtreme Fast
Charging (XFC) (DIRECT XFC)
Tim Pennington, INL
ELT258: Grid-Enhanced, Mobility-Integrated Network Infrastructures for
Extreme Fast Charging (GEMINI-XFC)
Matteo Muratori, NREL
ELT115: Zero-Emission Cargo Transport I: Zero Emission Drayage Trucks
Phil Barroca, SCAQMD
Break
Break
Time
6:45 PM
Fuel and Lubricant Technologies (FT) Electrification Technologies (ELT)
Wednesday, June 3, Oral Presentations
Time
10:00
AM
10:15
AM
10:30
AM
10:45
AM
11:00
AM
11:15
AM
11:30
AM
11:45
AM
12:00
PM
12:15
PM
12:30
PM
1:00 PM
1:15 PM
1:30 PM
1:45 PM
2:00 PM
Materials Technology (MAT) Battery R&D (BAT) Energy-Efficient Mobility Systems (EEMS)
MAT173: Self-Sensing Fiber-Reinforced
Composites
Christopher Bowland, ORNL
MAT147: Continuous-Fiber, Malleable Thermoset
Composites with Sub-1-Minute Dwell Times:
Validation of Impact Performance and Evaluation
of the Efficacy of the Compression Forming
Process
Gabriel Ilevbare, INL
Wednesday, June 3, Oral Presentations
EEMS011: Integrated Mesoscale Urban Systems
Modeling with Behavior, Energy, Autonomy, and
Mobility (BEAM) to Explore Shared and
Automated Vehicles and their Impacts on Energy
and Mobility
Zach Needell, LBNL
EEMS058: Systems and Modeling for Accelerated
Research in Transportation (SMART) Mobility
Consortium Tools and Process Development
Aymeric Rousseau, ANL
EEMS030: Experimental Evaluation of Eco-Driving
Strategies
Wei-Bin Zhang, LBNL
EEMS044: Quantification of National Energy
Impacts of Electrified Shared Mobility with
Infrastructure Support
Joann Zhou, ANL
MAT152: A Hybrid Physics-Based, Data-Driven
Approach to Model Damage Accumulation in
Corrosion of Polymeric Adhesives
Roozbeh Dargazany, Michigan State University
MAT131: Corrosion Control in Carbon-Fiber
Reinforced Polymer Composite-Aluminum
Closure Panel Hem Joints
Brian Okerberg, PPG
MAT153: Multi-Scale Computational Platform for
Predictive Modeling of Corrosion in Aluminum-
Steel Joints
Miki Banu, University of Michigan
MAT132: High-Strength Steel-Aluminum
Components by Vaporizing Foil Actuator Welding
Glenn Daehn, Ohio State University
MAT133: Corrosion Protection and Dissimilar
Material Joining for Next-Generation Lightweight
Vehicles
DJ Spinella, Arconic
BAT395: Developing Safe, High-Energy, Fast-
Charge Batteries for Automobiles
Wenjuan Mattis, Microvast, Inc.
BAT396: Enabling Extreme Fast Charging through
Anode Modification
Esther Takeuchi, Stony Brook University
BAT397: Titanium Niobium Oxide-Based Lithium-
Ion Batteries for Extreme Fast-Charging
Applications
Sheng Dai, University of Tennessee at Knoxville
BAT398: Extreme Fast-Charging Lithium-Ion
Batteries
Edward Buiel, Edward Buiel Consulting, LLC
BAT400: Novel Liquid/Oligomer Hybrid Electrolyte
with High Lithium-Ion Transference Number (Hi-
LiT) for Extreme Fast Charging
Zhijia Du, ORNL
BAT401: Advanced Electrolytes for Extreme Fast
Charging
William Chueh, Stanford University
BAT442: Behind-the-Meter-Storage (BTMS)
Overview
Anthony Burrell, NREL
MAT125: Integrated Computational Materials
Engineering (ICME) Predictive Tools for Low-Cost
Carbon Fiber
Jeramie Adams, Western Research Institute
MAT124: Integrated Computational Materials
Engineering (ICME) Predictive Tools for Low-Cost
Carbon Fiber for Lightweight Vehicles
Xiadong Li, University of Virginia
EEMS074: Smart Cities Topology–Curbs and
Parking
Stanley Young, NREL
EEMS023: The Whole Traveler Tranportation-
Behavior Study
Anna Spurlock, LBNL
EEMS057: Urban Traveler–Changes and Impacts:
Mobility Energy Productivity (MEP) Metric
Venu Garikapali, NREL
EEMS045: Focused Validation and Data Collection
to SMART Activities
Eric Rask, ANL
Lunch Break
Time
2:15 PM
2:30 PM
3:00 PM
3:15 PM
3:30 PM
3:45 PM
4:00 PM
4:15 PM
4:30 PM
5:00 PM
5:15 PM
5:30 PM
5:45 PM
6:00 PM
6:15 PM
6:30 PM
Materials Technology (MAT) Battery R&D (BAT) Energy-Efficient Mobility Systems (EEMS)
Wednesday, June 3, Oral Presentations
BAT416: Cobalt-Free Cathode Materials and Their
Novel Architectures
Shirley Meng, University of California at San
Diego
BAT417: Cobalt-Free Cathodes for Next-
Generation Lithium-Ion Batteries
Neil Kidner, Nexceris
BAT411: Aerosol Manufacturing Technology for
Production of Low-Cobalt Lithium-Ion Battery
Cathodes
Toivo Kodas, Cabot Corporation
BAT412: Novel Lithium-Iron and Aluminum
Nickelate (NFA) as Advanced Cobalt-Free Cathode
Materials
Ilias Belharouak, ORNL
BAT415: High-Nickel Cathode Materials for High-
Energy, Long-Life, Low-Cost Lithium-Ion Batteries
Arumugam Manthiram, University of Texas at
Austin
BAT414: Enhancing Oxygen Stability in Low-
Cobalt, Layered-Oxide Cathode Materials
Huolin Xin, University of California at Irvine
BAT413: High-Performance, Low-Cobalt Cathode
Materials for Lithium-Ion Batteries
Donghai Wang, Penn State UniversityMAT122: Close-Proximity Electromagnetic
Carbonization (CPEC)
Felix Paulauskas, ORNL
MAT174: Carbon-Fiber Technology Facility (CFTF)
Merlin Theodore, ORNL
EEMS016: Energy-Efficient CAVs
Dominik Karbowski, ANL
EEMS059: Experimental Evaluation of CACC for
Passenger Cars
Eric Rask, ANL
MAT119: Ultra-Light Hybrid Composite Door
Design, Manufacturing, and Demonstration
Nate Gravelle, TPI
MAT146: Ultra-Lightweight, Ductile Carbon-Fiber
Reinforced Composites
Vlastimil Kunc, ORNL
MAT117: Development and Integration of
Predictive Models for Manufacturing and
Structural Performance of Carbon-Fiber
Composites in Automotive Applications
Venkat Aitharaju, General Motors
BAT442: Behind-the-Meter-Storage (BTMS)
Overview
Anthony Burrell, NREL
BAT377: ReCell Overview and Update
Jeff Spangenberger, ANL
MAT125: Integrated Computational Materials
Engineering (ICME) Predictive Tools for Low-Cost
Carbon Fiber
Jeramie Adams, Western Research Institute
MAT118: Functionally Designed Ultra-Lightweight
Carbon-Fiber Reinforced Thermoplastic
Composites Door Assembly
Srikanth Pilla, Clemson University.
EEMS045: Focused Validation and Data Collection
to SMART Activities
Eric Rask, ANL
EEMS020: Multi-Scenario Assessment of
Optimization Opportunities due to Connectivity
and Automation
Jackeline Rios-Torres, ORNL
EEMS033: Using Truck Cooperative Adaptive
Cruise Control (CACC) to Test Operational Energy
Consumption at Intersection with Active Traffic
Signal Control
Xiao-Yun Lu, LBNL
EEMS039: Tradeoffs for Charging Infrastructure of
Human-Driven and Fully Automated Fleet in San
Francisco
John Smart, INL
EEMS081: Nationwide Energy and Mobility
Impacts of CAV Technologies
David Gohlke, ANL
Break
Break
Time
6:45 PM
Materials Technology (MAT) Battery R&D (BAT) Energy-Efficient Mobility Systems (EEMS)
Wednesday, June 3, Oral Presentations
Time Advanced Combustion Engines (ACE) Fuel and Lubricant Technologies (FT)
10:00
AM
10:15
AM
10:30
AM
10:45
AM
11:00
AM
11:15
AM
11:30
AM
11:45
AM
12:00
PM
12:15
PM
12:30
PM
1:00 PM
1:15 PM
1:30 PM
1:45 PM
2:00 PM
2:15 PM
2:30 PM Break
FT087: Multimode, Co-Optimized, Light-Duty Vehicle Engine
Phil Zoldak, Hyundai-Kia North America
Lunch Break
ACE155: Low-Mass and High-Efficiency Engine for Medium-Duty Truck
Applications
Qigui Wang, GM
ACE135: Towards Predictive Nozzle Flow and Combustion Simulations for
Compression Ignition Engines
Gina Magnotti, ANL
ACE154: Heavy-Duty Hybrid Diesel Engine with Front-End Accessory Drive-
Integrated Energy Storage
Chad Koci, Caterpillar
ACE001: Heavy-Duty Diesel Combustion
Mark Musculus, SNL
ACE136: Medium-Duty Diesel Combustion
Steven Busch, SNL
ACE157: Low-Temperature Gasoline Combustion for High-Efficiency
Medium- and Heavy-Duty Engines
John Dec, SNL
Thursday, June 4, Oral Presentations
ACE156: Next-Generation, High-Efficiency Boosted Engine Development
Michael Shelby, Ford
Time Advanced Combustion Engines (ACE) Fuel and Lubricant Technologies (FT)
Thursday, June 4, Oral Presentations
3:00 PM
3:15 PM
3:30 PM
3:45 PM
4:00 PM
4:15 PM
4:30 PM
5:00 PM
5:15 PM
5:30 PM
5:45 PM
6:00 PM
6:15 PM
6:30 PM
6:45 PM
Break
ACE102: Cummins-Peterbilt SuperTruck 2
Jon Dickson, Cummins
ACE101: Volvo SuperTruck 2: Pathway to Cost-Effective Commercialized
Freight Efficiency
Pascal Amar, Volvo Trucks North America
ACE100: Improving Transportation Efficiency through Integrated Vehicle,
Engine, and Powertrain Research - SuperTruck 2
Darek Villeneuve, Daimler Trucks North AmerIca
ACE124: SuperTruck 2 - PACCAR
Maarten Meijer, PACCAR
ACE103: Development and Demonstration of a Fuel-Efficient Class 8
Tractor and Trailer SuperTruck
Russell Zukouski, Navistar
Time
10:00
AM
10:15
AM
10:30
AM
10:45
AM
11:00
AM
11:15
AM
11:30
AM
11:45
AM
12:00
PM
12:15
PM
12:30
PM
1:00 PM
1:15 PM
1:30 PM
1:45 PM
2:00 PM
2:15 PM
2:30 PM
Electrification Technologies (ELT) Materials Technology (MAT)
Break
Lunch Break
ELT204: Charging Infrastructure Technologies: Development of a Multiport,
>1 MW Charging System for Medium- and Heavy-Duty Electric Vehicles
Andrew Meintz, NREL
ELT241: High-Efficiency, Medium-Voltage Input, Solid-State, Transformer-
Based 400-kW/1000-V/400-A Extreme Fast Charger for Electric Vehicles
Charles Zhu, Delta Electronics
ELT198: Cybersecurity: Securing Vehicle Charging Infrastructure
Jay Johnson, SNL
ELT199: Cybersecurity: Consequence-Driven Cybersecurity for High-Power
Charging Infrastructure
Richard Carlson, INL
ELT206: Cybersecurity Platform and Certification Framework Development
for Extreme Fast Charging, Integrated Charging, Infrastructure Ecosystem
Tobias Whitney, EPRI
ELT207: Enabling Secure and Resilient Extreme Fast Charging: A
Software/Hardware Security Co-Design Approach
Ryan Gerdes, Virginia Tech
Thursday, June 4, Oral Presentations
ELT205: Cybersecurity for Grid-Connected Extreme Fast Charging Station
(CyberX)
David Coats, ABB
MAT162: Machine Learning and Supercomputing to Predict
Corrosion/Oxidation of High-Performance Valve Alloys
Dongwon Shin, ORNL
MAT163: Multiscale Modeling of Corrosion and Oxidation Performance
and Their Impact on High-Temperature Fatigue of Automotive Exhaust
Manifold Components
Mei Li, Ford
MAT164: Multiscale Development and Validation of the Stainless Steel
Alloy Corrosion (SStAC) Tool for High-Temperature Engine Materials
Michael Tonks, University of Florida
MAT186: Modeling of Light-Duty Engines
Charles Finney, ORNL
MAT187: Fundamental Studies of Complex Precipitation Pathways in
Lightweight Alloys
Dongwon Shin, ORNL
ELT187: Comprehensive Assessment of On- and Off-Board, Vehicle-to-Grid
Technology Performance and Impacts on Batteries and the Grid (SPIN
System)
Sunil Chhaya, EPRI
MAT188: Properties of Cast Aluminum-Copper-Manganese-Zirconium
Alloys
Amit Shyam, ORNL
MAT189: Fundamental Development of Aluminum Alloys for Additive
Manufacturing
Alex Plotkowski, ORNL
MAT190: Oxidation Resistant Valve Alloys
G. Muralidharan, ORNL
Time
3:00 PM
3:15 PM
3:30 PM
3:45 PM
4:00 PM
4:15 PM
4:30 PM
5:00 PM
5:15 PM
5:30 PM
5:45 PM
6:00 PM
6:15 PM
6:30 PM
6:45 PM
Electrification Technologies (ELT) Materials Technology (MAT)
Thursday, June 4, Oral Presentations
Break
ELT240: Wireless Extreme Fast Charging for Electric Trucks (WXFC-Trucks)
Mike Masquelier, WAVE
ELT197: High Power and Dynamic Wireless Charging of Electric Vehicles
Veda Galigekere, ORNL
ELT188: Bi-Directional Wireless Power Flow for Medium-Duty, Vehicle-to-
Grid Connectivity
Omar Onar, ORNL
MAT192: Fundamentals of Austenitic Alloys via Additive Manufacturing
Sebastien Dryepondt, ORNL
MAT193: Higher Temperature Heavy-Duty Piston Alloys
Dean Pierce, ORNL
MAT165: Directly Extruded High Conductivity Copper for Electric Machines
Keerti Kappagantula, PNNL
ELT236: Direct-Current Conversion Equipment Connected to the Medium-
Voltage Grid for Extreme Fast Charging Utilizing Modular and
Interoperable Architecture
Watson Collins, EPRI
ELT237: Enabling Extreme Fast Charging with Energy Storage
Jonathan Kimball, Missouri S&T
ELT238: Intelligent, Grid-Friendly, Modular Extreme Fast Charging System
with Solid-State Direct-Current Protection
Srdjan Lukic, North Carolina State University
ELT239: High-Power Inductive Charging System Development and
Integration for Mobility
Omer Onar, ORNL
MAT191: Overview of Advanced Characterization within the Powertrain
Materials Core Program
Tom Watkins, ORNL
Time
10:00
AM
10:15
AM
10:30
AM
10:45
AM
11:00
AM
11:15
AM
11:30
AM
11:45
AM
12:00
PM
12:15
PM
12:30
PM
1:00 PM
1:15 PM
1:30 PM
1:45 PM
2:00 PM
2:15 PM
2:30 PM
Battery R&D (BAT) Energy-Efficient Mobility Systems (EEMS)
Break
EEMS027: Multi-Modal Energy Analysis for Freight
Alicia Birky, NREL
EEMS060: Agent-Based Model and Data Collection for Inter- and Intracity
Freight Movement
Monique Stinson, ANL
EEMS034: Optimization of Intra-City Freight Movement and New Delivery
Methods
Amy Moore, ORNL
EEMS078: Simulation Model Results for Energy and Mobility Impact of
Behavioral Scenarios in POLARIS
Joshua Auld, ANL
EEMS035: Coupling Land-Use Models and Network-Flow Models
Paul Wadell, University of California at Berkeley
Lunch Break
BAT364: Surface Coating for High-Energy Cathode
Jihui Yang, University of Washington
Thursday, June 4, Oral Presentations
BAT317: Progress and Status of Battery500 Program
Jun Liu, PNNL
BAT359: Status and Challenges of Electrode Materials for High-Energy Cells
Stanley Whittingham, Binghamton University
BAT360: Scale-Up Optimization and Characterization of High-Nickel
Cathodes
Arumugam Manthiram, University of Texas at Austin
BAT361: Understanding Electrode Interface Through Cryogenic Electron
Microscopy
Yi Cui, Stanford University/SLAC
BAT362: Lithium-Metal Anodes: Problems and Multiple Solutions Based on
Hosts, Interphase, and Electrolytes
Jason Zhang, PNNL
BAT454: Development of Long-Life Lithium/Sulfur-Containing
Polyacrylonitrile Cells
Ping Liu, University of California at San Diego
BAT365: Stabilizing Lithium-Metal Anode by Interfacial Layer
Zhenan Bao, Stanford University/SLAC
Time
3:00 PM
3:15 PM
3:30 PM
3:45 PM
4:00 PM
4:15 PM
4:30 PM
5:00 PM
5:15 PM
5:30 PM
5:45 PM
6:00 PM
6:15 PM
6:30 PM
6:45 PM
Battery R&D (BAT) Energy-Efficient Mobility Systems (EEMS)
Thursday, June 4, Oral Presentations
BAT368: Battery500 Integrated Cell Diagnostics and Modeling to Identify
Critical Gaps in Achieving High Cycle Life
Eric Dufek, INL
BAT369: High-Energy Rechargeable Lithium-Metal Cells: Fabrication and
Integration
Jie Xiao, PNNL
BAT370: Advanced Diagnostics of Nickel-Rich, Layered-Oxide Secondary
Particles
Mike Toney, SLAC
BAT455: In Operando Characterization of Lithium Plating and Stripping
William Chueh, Stanford University
Break
BAT366: Advanced Imaging and Quantitative Characterization of Lithium-
Metal Anode and Its Solid Electrolyte Interphase (SEI)
Shirley Meng, University of California at San Diego
BAT367: Characterization Studies on High-Nickel Cathode Materials
Peter Khalifah, BNL