tunnel oven
TRANSCRIPT
Graymills’ Biomatic Parts Clean-
ing System uses the natural tech- nology of bioremediation to re- duce solid waste and virtually
eliminate liquid waste. After fill-
Nitec 5000 is a low (I -4% phos) electroless nickel for
m , l
high “as deposited” hardness. Uniform, semi-bright,
llnd Mwe Chuices in
versatile! Use on allov steels, ceramics, hundreds of
Electroless Nickel i
LOW-PHOS
HI-PHOS
Passes the nitric acid test. Nitec 85 uses a
Nitec 85 - semi-bright; ideal for high corrosion
non-sulfur stabilizer.
resistance cvith excellent ductility. Plates uniformly;
deposits on steel, stainless, aluminum, copper
alloys, titanium, magnesium beryllium.
ing the parts washer with Super Biotene cleaning solution you then release a small packet of liv- ing microbes into the solution, which cleans the solution. Oil, grease, and other hydrocarbons are converted to carbon dioxide and water. Bioremediation almost completely eliminates the need for, and the costs associated with, hazardous waste disposal. Circle 415 on the reader service card
TUNNEL OVEN
The Grieve Corp., Palatine, Ill.
No. 878 is a 350” gas-heated tun- nel oven from Grieve, currently
substrates! Superior’stability, and solderability.
MIL-C-26074, AMS-2404C and AMS-24056.
MID-PHOS
Contamination-tolerant. 6-l& phosphorus;
ideal over aluminum.
Nifec 7.5 and @H-regulated) Nitec 95 - Ion cost per ml sq.A! Stable and plate-out resistant.
T&t Nltec performance on your components’ Call
Ihe Heatbofb Answer Nefwork today to arrange
tample processing, or for details and documentation
on the Nitec processes
(4131543-3381 _
@
Heatbath Nifec 9000 - Plates at a fast 0.8-1.2 mls,‘hour, depositing a very bright coating on steel,
copper, brass, aluminum and other substrates.
Exceptional hardnesses as plated, with mid to low
phosphorus content Runs with the ease of a mid-phos, with hardness and bvear equal to the finest low phos.
CORPORATION @ P.O. Box 2978
Springfield, MA 01102
Fax: (413) 543-2378
www.heatbath.com WI
Chlcugo * Detroit
Circle 021 on reader card or go to www.thru.to/webconnect
used for drying water from alumi- num parts hung on a monorail pass-through conveyor at the cus- tomer’s facility. The oven is sus- pended from the factory ceiling and operated by a remote control panel. A 6,000 cfm, 5-hp recircu- lating blower provides vertical downward airflow to the work- load, while a 500,000 BTU/HR in- stalled in the modulating natural
gas blower heats the workspce. The tunnel oven features an alu- minized steel interior and exte- rior. Circle 416 on the reader service card
FILTERING UNITS
DeVilbiss, ITW Industrial Finishing, Glendale Heights, Ill.
The DeVilbiss CleanAir product line features four types of filtering
December 2001 55