turck - steven engineering · q08 with threaded picofast connector output part number id #...

TURCKDieguard Sensors

3 TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 www.turck.com

ifferential Travel (Hysteresis)

Embeddable construction includes a metal bandthat surrounds the ferrite core and coilarrangement. This helps to “bundle” or direct theelectro- magnetic field to the front of the sensor.

Figure 1Embeddable

(Shielded Sensor)

Figure 2Nonembeddable

(Nonshielded Sensor)

Nonembeddable sensors do not have this metalband; therefore, they have a longer operatingdistance and are side sensitive.

The difference between the “operate” and“release” points is called differential travel(See shaded area in Figure 3).It is factory set at less than 15% of theeffective operating distance.Differential travel is needed to keepproximity sensors from “chattering” whensubjected to shock and vibration, slowmoving targets, or minor disturbances suchas electrical noise and temperature drift.

Figure 3

Actuation Mode

Inductive sensors can be actuated in an axial or lateral approach (See Figure 3). It is important to maintain an air gap betweenthe target and the sensing face to prevent physically damaging the sensors.

Embeddable (Shielded) vs. Nonembeddable (Nonshielded)

TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 www.turck.com 4

Uprox Characteristics

• No Correction Factor - Same rated operating distance for all metals.

• Extended Operating Distance - Up to 400% greater than standard inductive sensors when using non-ferrous targets (Figure 4).

• Weld Field Immunity - Uprox is unaffected by strong electromagnetic AC or DC fields because of its unique patented design.

• High Switching Frequencies - Up to 10 times faster than standard inductive sensors.

• Extended Temperature Range - Uprox can withstand temperatures up to 85°C (+185°F) with a ±15% temperature drift.

Figure 4

Operating Principle Uprox

UproxNi12U-M18-..

StandardNi 8-M18-..

Figure 5

Operating distances comparison of Uproxsensors and standard inductive sensors.

TURCK Uprox is a patented next generation developmentof inductive sensors that uses a three-coil system. One coilinduces eddy currents on the metal target and the othertwo coils are affected by these eddy currents. Ferrous andnonferrous metals have the same effect on the two coils.Therefore, all metals, including galvanized metals, have thesame rated operating distance.

TURCK standard inductive sensors use a single coilrandomly wound around a ferrite core. The single coil bothinduces eddy currents on the metal target and is affectedby these eddy currents. Ferrous and nonferrous metalsaffect the sensor differently, making it impossible to detectboth types of metals at the same rated operating distance.

StandardSensor

Uprox



Operating Distance (Sensing Range) Considerations

Figure 6

Standard Target

The assured actuating range is between 0 and 81% of the rated operating distance. It is the range within which the correctoperation of the proximity sensor under specified voltage and temperature ranges is assured.

A square piece of mild steel having a thickness of 1 mm (0.04 in) is used as a standard target to determine the followingoperating tolerances. The length and width of the square is equal to either the diameter of the circle inscribed on theactive surface of the sensing face or three times the rated operating distance Sn, whichever is greater.

The operating distance (S) of the different models is basically a function of the diameter of the sensing coil. Maximumoperating distance is achieved with the use of a standard or larger target. Rated operating distance (Sn) for each model isgiven in the manual. When using a proximity sensor the target should be within the assured range (Sa).

The operating distance is the distance at which the target approaching the sensing face along the reference axis causes theoutput signal to change.

The rated operating distance is a conventional quantity used to designate the nominal operating distance. It does not takeinto account either manufacturing tolerances or variations due to external conditions such as voltage and temperature.

The effective operating distance is the operating distance of an individual proximity sensor at a constant rated voltage and23°C (73°F). It allows for manufacturing tolerances.

The usable operating distance is the operating distance of an individual proximity sensor measured over the operatingtemperature range at 85% to 110% of its rated voltage. It allows for external conditions and for manufacturing tolerances.

Operating Distance = S

Rated Operating Distance = Sn

Effective Operating Distance = Sr 0.9 Sn ≤Sr ≤1.1Sn

Assured Operating Range = Sa 0 ≤Sa ≤0.81Sn

Usable Operating Distance = Su 0.81 Sn ≤Su ≤1.21Sn


Notes:

TURCKInductive Sensors


Selection Guide

Housing Styles Pages

Rectangular Style

9 - 11

Smooth Barrel Style

12 - 14

Threaded Barrel Style

15 - 18

Side Sensing Style

18

Ring Sensing Style

19

Note: All dimensions in this manual are shown as: inches [mm]


Sensor Selection Guide

. . . . . . . . . . . . . . . . . . . . . . . . . . . . Page Number

Embeddable vs. Nonembeddable . . . . . . . . . . . . . . . . . . . . 3

Operating Characteristics . . . . . . . . . . . . . . . . . . . . . . 4

Operating Distance Considerations . . . . . . . . . . . . . . . . . . . 5

Q5.5 Rectangular Style, Plastic . . . . . . . . . . . . . . . . . . . . 9

Q06 Rectangular Style, Plastic . . . . . . . . . . . . . . . . . . . . . 9

Q6.5 Rectangular Style, Plasic . . . . . . . . . . . . . . . . . . . . . 9

Q08 Rectangular Style, Metal . . . . . . . . . . . . . . . . . . . . . 10

Q8SE Rectangular Style, Metal . . . . . . . . . . . . . . . . . . . . 11

Q9.5 Rectangular Style, Plastic . . . . . . . . . . . . . . . . . . . . 11

Q10S Rectangular Style, Plastic . . . . . . . . . . . . . . . . . . . . 11

CA4080 Rectangular Style, Metal . . . . . . . . . . . . . . . . . . . . 11

CA40130 Rectangular Style, Metal . . . . . . . . . . . . . . . . . . . 11

Barrels, Metal with Quick Disconnect . . . . . . . . . . . . . . . . 13 - 14, 16 - 18

Barrels, Side Sensing with Potted-in Cable . . . . . . . . . . . . . . . . . 18

Barrels, Metal with Potted-in Cable. . . . . . . . . . . . . . . . . . 12 - 13, 15

Rectangular Ring Style Plastic . . . . . . . . . . . . . . . . . . . . . 19

Dimensional Diagrams . . . . . . . . . . . . . . . . . . . . . . 21 - 25

Wiring Diagrams . . . . . . . . . . . . . . . . . . . . . . . . . 27

Sensor Activation Point Graphs . . . . . . . . . . . . . . . . . . . 28 - 34

Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . 35

Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 - 37



Q5.5 with Potted-In Cable Connection Output Part Number ID #

Installation · · · · · · · · Flush MountSensing Range · · · · · · 2 mm (.079)Power Supply· · · · · · · 10-30 VDC (3-wire)Number of LEDs · · · · · 1

NPNDiagram A Bi 2-Q5.5-AN6X M1613100

PNPDiagram B

Bi 2-Q5.5-AP6XBi 2-Q5.5-AP6X/S34 2)

M1613000M1613001See Drawing #1

Q5.5


Installation · · · · · · · · Non-Flush MountSensing Range · · · · · · 3.5 mm (.138)Power Supply· · · · · · · 10-30 VDC (3-wire)Number of LEDs · · · · · 1

NPNDiagram A Ni 3.5-Q5.5-AN6X M4613610

PNPDiagram B Ni 3.5-Q5.5-AP6X M4613601

Q06 with Potted-In Cable Connection Output Part Number ID #


NPNDiagram A Bi 3-Q06-AN6X2 M1620150

PNPDiagram B Bi 3-Q06-AP6X2 M1620100See Drawing #2

Q06



NPNDiagram A Bi 1-Q6.5-AN6 M4613420

PNPDiagram B

Bi 1-Q6.5-AP6Bi 1-Q6.5-AP6/S34 2)

M4613400M4613401See Drawing #3

Q6.5


Installation · · · · · · · · Non-Flush MountSensing Range · · · · · · 2 mm (.079)Power Supply· · · · · · · 10-30 VDC (3-wire)Number of LEDs · · · · · 0

NPNDiagram A Ni 2-Q6.5-AN6 M4613520

PNPDiagram B

Ni 2-Q6.5-AP6Ni 2-Q6.5-AP6/S34 2)

M4613500M1650023

Notes:1. Uprox technology. Sense all metals at the same range. Inherently weld-field immune.2. “/S34” designates weld-field immune sensor.3. All products available with Normally Closed output. Consult TURCK.4. Sensing range based on a target 1”x1”x1/8” cold rolled steel.

Rectangular Style


Q08 with Snap-lock picofast Connector Output Part Number ID #

Installation · · · · · · · · Flush MountSensing Range (Bi 5..)· · · 5 mm (.197)Sensing Range (Bi 7..)· · · 7 mm (.276)Power Supply· · · · · · · 10-30 VDC (3-wire)Number of LEDs · · · · · 2

NPNDiagram C

Bi 5U-Q08-AN6X2-V1131 1)

Bi 5-Q08-AN6X2-V1131Bi 7-Q08-AN6X2-V1131

M1608910M1600600M1601622

PNPDiagram D

Bi 5U-Q08-AP6X2-V1131 1)

Bi 5-Q08-AP6X2-V1131Bi 7-Q08-AP6X2-V1131

M1608900M1600500M1601602

Q08-ES with Amphenol Connector (31-342-RFX) Output Part Number ID #


Analog Bi 3-Q08-ES-0.2/S1027 M1044691

Notes:1. Uprox technology. Sense all metals at the same range. Inherently weld-field immune.2. “/S34” designates weld-field immune sensor.3. All products available with Normally Closed output. Consult TURCK.4. Sensing range based on a target 1”x1”x1/8” cold rolled steel.

See Drawing #5

Q08

Q08 with Potted-In Cable Connection Output Part Number ID #


NPNDiagram A

Bi 5U-Q08-AN6X2 1)

Bi 7-Q08-AN6X2M1608911M1601620

PNPDiagram B

Bi 5U-Q08-AP6X2 1)

Bi 5-Q08-AP6X2/S34 2)

Bi 7-Q08-AP6X2

M1608901M1600800M1601600 See Drawing #4

Q08

Rectangular Style

See Drawing #8

Q08-ES

Q08-ES with Potted-In Cable Connection Output Part Number ID #


Analog Bi 3-Q08-ES-0.2Bi 3-Q08-ES-1.22

M1044601M1044602

Q08 with threaded picofast Connector Output Part Number ID #


NPNDiagram C

Bi 5-Q08-AN6X2-V2131Bi 7-Q08-AN6X2-V2131

M1600602M1601623

PNPDiagram D

Bi 5-Q08-AP6X2-V2131Bi 7-Q08-AP6X2-V2131

M1600502M1601603

See Drawing #7

Q08-ES

See Drawing #6

Q08

To be used only with Weldotron® Microscan

To be used only with Weldotron® Microscan



Rectangular Style with minifast Connector Output Part Number ID #

Installation · · · · · · · · Flush MountSensing Range · · · · · · 20 mm (.787)Power Supply· · · · · · · 20-250 VAC· · · · · · · · · · · · · · 10-300 VDC (4-wire)Number of LEDs · · · · · 2

ACDiagram G

Bi20-CA4080-ADZ30X2-B1131Bi20-CA40130-ADZ30X2-B1131/S1009

T4283400T4283503

Notes:1. “/S34” designates weld-field immune sensor.2. All products available with Normally Closed output. Consult TURCK.3. Sensing range based on a target 1”x1”x1/8” cold rolled steel.

See Drawing #13 & 14

CA4080

Rectangular Style with Potted-In Cable Output Part Number ID #


NPNDiagram A Bi 2-Q10S-AN6X S1619310

PNPDiagram B Bi 2-Q10S-AP6X S1609360See Drawing #12

Q10S

Rectangular Style with Potted-In Cable Output Part Number ID #


PNPDiagram B Ni 2-Q9.5-AP6/S34 1) M1650077

See Drawing #11

Q9.5

Rectangular Style

Q8SE with Potted-In Cable Connection Output Part Number ID #


NPNDiagram A Bi 2-Q8SE-AN6X M1619320

PNPDiagram B Bi 2-Q8SE-AP6X M1619330

See Drawing #9

Q8SE

Q8SE with picofast Connector Output Part Number ID #


NPNDiagram C Bi 2-Q8SE-AN6X-V1131 M1619321

PNPDiagram D Bi 2-Q8SE-AP6X-V1131 M1619331

See Drawing #10

Q8SE


EH04 with Potted-In Cable Connection Output Part Number ID #


NPNDiagram A Bi 1-EH04-AN6X S4609640

PNPDiagram B Bi 1-EH04-AP6X S4609540

See Drawing #15

EH04

EH6.5 with Potted-In Cable Connection Output Part Number ID #

Installation · · · · · · · · Flush MountSensing Range (Bi 1.5..)· · 1.5 mm (.059)Sensing Range (Bi 2..)· · · 2 mm (.079)Power Supply· · · · · · · 10-30 VDC (3-wire)Number of LEDs · · · · · 1

NPNDiagram A

Bi 1.5-EH6.5-AN6XBi 2-EH6.5-AN6X

S4612100S4612300

PNPDiagram B

Bi 1.5-EH6.5-AP6XBi 2-EH6.5-AP6X

S4612000S4612200 See Drawing #16

EH6.5

EH6.5 with Potted-In Cable Connection Output Part Number ID #


NPNDiagram A Ni 3-EH6.5-AN6X S4612500

PNPDiagram B Ni 3-EH6.5-AN6X S4612500

See Drawing #17

EH6.5

EH6.5K with Potted-In Cable Connection Output Part Number ID #


NPNDiagram A

Bi 1.5-EH6.5K-AN6XBi 2-EH6.5K-AN6X

S4610640S4610100

PNPDiagram B

Bi 1.5-EH6.5K-AP6XBi 2-EH6.5K-AP6X

S4610540S4610000 See Drawing #18

EH6.5K

EH6.5K with Potted-In Cable Connection Output Part Number ID #


NPNDiagram A Ni 3-EH6.5K-AN6X S4610300

PNPDiagram B Ni 3-EH6.5K-AN6X S4610300

Notes:1. All products available with Normally Closed output. Consult TURCK.2. Sensing range based on a target 1”x1”x1/8” cold rolled steel.

See Drawing #19

EH6.5K

Smooth Barrel Style




Installation · · · · · · · · Flush MountSensing Range · · · · · · 1.5 mm (.059)Power Supply· · · · · · · 10-30 VDC (3-wire)Number of LEDs · · · · · 1

NPNDiagram A Bi 1.5-H08-AN6X S1614300

PNPDiagram B Bi 1.5-H08-AP6X S1604300

See Drawing #20

EH08

Smooth Barrel Style

EH08K with Potted-In Cable Connection Output Part Number ID #


NPNDiagram A Ni 2-H08K-AN6X S1614700

PNPDiagram B Ni 2-H08K-AP6X S1604700

See Drawing #22



NPNDiagram A Ni 3-H08-AN6X S1614900

PNPDiagram B Ni 3-H08-AP6X S1604900

See Drawing #21

EH04 with picofast Connector Output Part Number ID #


NPNDiagram C Bi 1-EH04-AN6X-V1331 S4608540

PNPDiagram D Bi 1-EH04-AP6X-V1331 S4608440

See Drawing #23

EH04

EH6.5 with picofast Connector Output Part Number ID #


NPNDiagram C

Bi 1.5-EH6.5-AN6X-V1131Bi 2-EH6.5-AN6X-V1131

S4612120S4612320

PNPDiagram D

Bi 1.5-EH6.5-AP6X-V1131Bi 2-EH6.5-AP6X-V1131

S4612020S4612220


H08

H08K

See Drawing #24

EH6.5


EH6.5 with picofast Connector Output Part Number ID #


NPNDiagram C Ni 3-EH6.5-AN6X-V1131 S4612520

PNPDiagram D Ni 3-EH6.5-AP6X-V1131 S4612420

EH6.5K with picofast Connector Output Part Number ID #


NPNDiagram C

Bi 1.5-EH6.5K-AN6X-V1131Bi 2-EH6.5K-AN6X-V1131

S4610840S4610120

PNPDiagram D

Bi 1.5-EH6.5K-AP6X-V1131Bi 2-EH6.5K-AP6X-V1131

S4610740S4610020 See Drawing #26

Smooth Barrel Style

EH6.5K with picofast Connector Output Part Number ID #


NPNDiagram C Ni 3-EH6.5K-AN6X-V1131 S4610320

PNPDiagram D Ni 3-EH6.5K-AP6X-V1131 S4610220

H08K with picofast Connector Output Part Number ID #


NPNDiagram C Bi 1.5-H08K-AN6X-V1131 S1604340

PNPDiagram D Bi 1.5-H08K-AP6X-V1131 S1604330

H08K with picofast Connector Output Part Number ID #


NPNDiagram C Ni 2-H08K-AN6X-V1131 S1614800

PNPDiagram D Ni 2-H08K-AP6X-V1131 S1604800


See Drawing #29

See Drawing #25

See Drawing #27

See Drawing #28

EH6.5

EH6.5K

EH6.5K

H08K

H08K



EG05 with Potted-In Cable Connection Output Part Number ID #


NPNDiagram A Bi 1-EG05-AN6X S4609840

PNPDiagram B Bi 1-EG05-AP6X S4609740

EG05



NPNDiagram A

Bi 1.5U-EG08-AN6X 1)

Bi 1.5-EG08-AN6XBi 2-EG08-AN6X

S4600510S4602340S4602140

PNPDiagram B

Bi 1.5U-EG08-AP6X 1)

Bi 1.5-EG08-AP6XBi 2-EG08-AP6X

S4600500S4602240S4602040See Drawing #31

EG08


Installation · · · · · · · · Non-Flush MountSensing Range (Ni 3..) · · 3 mm (.118)Sensing Range (Ni 3..) · · 4 mm (.157)Power Supply· · · · · · · 10-30 VDC (3-wire)Number of LEDs · · · · · 1

NPNDiagram A

Ni 3-EG08-AN6XNi 4U-EG08-AN6X 1)

S4602840S4600610

PNPDiagram B

Ni 3-EG08-AP6XNi 4U-EG08-AP6X 1)

S4602740S4600600See Drawing #32

EG08

See Drawing #30


EG08K with Potted-In Cable Connection Output Part Number ID #


NPNDiagram A

Bi 1.5-EG08K-AN6XBi 2-EG08K-AN6X

S4669140S4669500

PNPDiagram B

Bi 1.5-EG08K-AP6XBi 2-EG08K-AP6X

S4669040S4669400

See Drawing #33

EG08K

EG08K with Potted-In Cable Connection Output Part Number ID #


NPNDiagram A Ni 3-EG08K-AN6X S4669700

PNPDiagram B Ni 3-EG08K-AP6X S4669600

Notes:1. Uprox technology. Sense all metals at the same range. Inherently weld-field immune.2. All products available with Normally Closed output. Consult TURCK.3. Sensing range based on a target 1”x1”x1/8” cold rolled steel.

See Drawing #34

EG08K


EG05 with picofast Connector Output Part Number ID #


NPNDiagram C Bi 1-EG05-AN6X-V1331 S4608740

PNPDiagram D Bi 1-EG05-AP6X-V1331 S4608640 See Drawing #35

EG05



NPNDiagram C

Bi 1.5U-EG08-AN6X-V1131 1)

Bi 1.5-EG08-AN6X-V1131Bi 2-EG08-AN6X-V1131

S4600530S4602350S4602150

PNPDiagram D

Bi 1.5U-EG08-AP6X-V1131 1)

Bi 1.5-EG08-AP6X-V1131Bi 2-EG08-AP6X-V1131

S4600520S4602220S4602050 See Drawing #36

EG08


Installation · · · · · · · · Non-Flush MountSensing Range (Ni 3..) · · 1.5 mm (.118)Sensing Range (Ni 4..) · · 4 mm (.157)Power Supply· · · · · · · 10-30 VDC (3-wire)Number of LEDs · · · · · 1

NPNDiagram C

Ni 3-EG08-AN6X-V1131Ni 4U-EG08-AN6X-V1131 1)

S4602850S4600630

PNPDiagram D

Ni 3-EG08-AP6X-V1131Ni 4U-EG08-AP6X-V1131 1)

S4602750S4600620

See Drawing #37

EG08

EG08K with picofast Connector Output Part Number ID #


NPNDiagram C

Bi 1.5-EG08K-AN6X-V1131Bi 2-EG08K-AN6X-V1131

S4672540S4669550

PNPDiagram D

Bi 1.5-EG08K-AP6X-V1131Bi 2-EG08K-AP6X-V1131

S4672440S4669450

See Drawing #38

EG08K


EG08K with picofast Connector Output Part Number ID #


NPNDiagram C Ni 3-EG08K-AN6X-V1131 S4669750

PNPDiagram D Ni 3-EG08K-AP6X-V1131 S4669650


See Drawing #39

EG08K



EG08 with eurofast Connector Output Part Number ID #


NPNDiagram E

Bi 1.5U-EG08-AN6X-H1341 1) S4600550

PNPDiagram F

Bi 1.5U-EG08-AP6X-H1341 1) S4600540See Drawing #40

EG08

EG08 with eurofast Connector Output Part Number ID #


NPNDiagram E Ni 4U-EG08-AN6X-H1341 1) S4600650

PNPDiagram F Ni 4U-EG08-AP6X-H1341 1) S4600640

See Drawing #41

EG08

G12 with picofast Connector Output Part Number ID #


NPNDiagram C Bi 2-G12-AN6X-V1131 T4635583

PNPDiagram D Bi 2-G12-AP6X-V1131 T4606597

See Drawing #42

G12

G12 with picofast Connector Output Part Number ID #

Installation · · · · · · · · Non-Flush MountSensing Range · · · · · · 5 mm (197)Power Supply· · · · · · · 10-30 VDC (3-wire)Number of LEDs · · · · · 1

NPNDiagram C Ni 5-G12-AN6X-V1131 T4635721

PNPDiagram D Ni 5-G12-AP6X-V1131 T4635690

See Drawing #43

G12

G12 with eurofast Connector Output Part Number ID #


NPNDiagram E Bi 2-G12-AN6X-H1141 T4606693

PNPDiagram F Bi 2-G12-AP6X-H1141 T4606595


See Drawing #44

G12



G12 with eurofast Connector Output Part Number ID #


NPNDiagram E Ni 5-G12-AN6X-H1141 T4635793

PNPDiagram F Ni 5-G12-AP6X-H1141 T4635692

See Drawing #45

G12

HS540 with Potted-In Cable Output Part Number ID #


NPNDiagram A Bi 1-HS540-AN6X S4604101

PNPDiagram B Bi 1-HS540-AP6X S4604001 See Drawing #46

HS540

HS865 with Potted-In Cable Output Part Number ID #


NPNDiagram A Bi 1.5-HS865-AN6X S4604301

PNPDiagram B Bi 1.5-HS865-AP6X S4604201 See Drawing #47

HS865

GS880 with Potted-In Cable Output Part Number ID #


NPNDiagram A Bi 1.5-GS880-AN6X S4604501

PNPDiagram B Bi 1.5-GS880-AP6X S4604401


See Drawing #48

GS880

Threaded & Smooth Side Sensing Barrel Styles

Threaded Barrel Styles



Q14 with Potted-In Cable Output Part Number ID #

Installation · · · · · · · · Flush MountSensing Range:

(Bi 6..) · · · · · · · · · 6.1 mm (.240)(Bi 10..) · · · · · · · · 10.1 mm (.398)(Bi 15..) · · · · · · · · 15.1 mm (.594)(Bi 20..) · · · · · · · · 20.1 mm (.791)

Power Supply· · · · · · · 10-30 VDC (3-wire)Number of LEDs · · · · · 2

NPNDiagram A

Bi 6R-Q14-AN6X2Bi10R-Q14-AN6X2Bi15R-Q14-AN6X2Bi20R-Q14-AN6X2

M1406020M1406120M1406220M1406320

PNPDiagram B

Bi 6R-Q14-AP6X2Bi10R-Q14-AP6X2Bi15R-Q14-AP6X2Bi20R-Q14-AP6X2

M1406000M1406100M1406200M1406300

Q20 with eurofast Connector Output Part Number ID #

Installation · · · · · · · · Flush MountSensing Range · · · · · · 30.1 mm (1.185)Power Supply· · · · · · · 10-30 VDC (3-wire)Number of LEDs · · · · · 2

NPNDiagram E Bi30R-Q20-AN6X2-H1141 M1407520

PNPDiagram F Bi30R-Q20-AP6X2-H1141 M1407500

W30 with eurofast Connector Output Part Number ID #

Installation · · · · · · · · Flush MountSensing Range:

(Bi 6..) · · · · · · · · · 6.1 mm (.240)(Bi10..)· · · · · · · · · 10.1 mm (.398)(Bi15..)· · · · · · · · · 15.1 mm (.594)(Bi20..)· · · · · · · · · 20.1 mm (.791)(Bi30..)· · · · · · · · · 30.1 mm (1.185)

Power Supply· · · · · · · 10-30 VDC (3-wire)Number of LEDs · · · · · 1

NPNDiagram E

Bi 6R-W30-DAN6X-H1141Bi10R-W30-DAN6X-H1141Bi15R-W30-DAN6X-H1141Bi20R-W30-DAN6X-H1141Bi30R-W30-DAN6X-H1141

M1403700M1403900M1404100M1404300M1404500

NPNDiagram F

Bi 6R-W30-DAP6X-H1141Bi10R-W30-DAP6X-H1141Bi15R-W30-DAP6X-H1141Bi20R-W30-DAP6X-H1141Bi30R-W30-DAP6X-H1141

M1403600M1403800M1404000M1404200M1404500


See Drawing #49

See Drawing #50

See Drawing #51

Q14

Q20

W30

Rectangular Style Ring Sensors


Notes:



2

8

1

7

4

3

65

10

9

11 12


151413

16 1817

19 20

22

21

23 24



26 2725

2928

31

30

33

34 35 36

32


43 4544

46 47 48

4140 42

38 3937



50 5149


Notes:



E NPN (Sinking) F PNP (Sourcing)

C NPN (Sinking) D PNP (Sourcing)

G Normally Open

B PNP (Sourcing)A NPN (Sinking)

3-Wire DC, Potted-In Cable Wiring Diagrams

3-Wire DC, Quick Disconnect, picofast, Wiring Diagrams

3-Wire DC, Quick Disconnect, eurofast, Wiring Diagrams

2-Wire AC/DC, Quick Disconnect, minifast, Wiring Diagrams


Sensor Activation Point

Red: Switch OnBlue: Switch OffGreen: CenterYellow: Sensing

TURCKSensor Accessories


PartNumber

IDNumber

Dimensions

A B C D E F G H J Probe Travel

WP-08-50-03 A2527

3.9299.6

1.2531.8

0.153.8

M8x1 .1253.2

2.0050.8

1.9549.5

.43611.1

M8x1 todepth of0.8621.8

For activation:.071(1.80) to.075(1.91)

Maximum:.080(2.03)

WP-12-50-03 A2528

M12x1

.1253.2

.62315.8

M12x1 todepth of0.7118.0

For activation:.056(1.42) to.080(2.03)

Maximum:.085(2.15)

WP-12-50-06 A2529 .2506.4

PartNumber

IDNumber

Dimensions

A B C D E F G H

DP-08-25-08 A2521

2.2557.2

1.0025.4

M8x1 0.4311.0

0.7218.4

2000 N450 lbft

0.205.08

.1152.93

DP-12-25-12 A2519 M12x1 0.6215.7

0.6717.4

20500 N4608 lbft

0.256.35

.1664.22

DP-18-25-18 A2520 M18x1 0.8722.1

0.8722.1

45000 N10115 lbft

0.256.35

.1664.22

Accessories


Bi

TURCK Part Numbers

TURCKPart Number Index


TURCK Part Numbers


TURCK Inc. sells its products through Authorized Distributors. These distributors provide ourcustomers with technical support, service and local stock. TURCK distributors are locatednationwide - including all major metropolitan marketing areas.

For Application Assistance or for the location of your nearest TURCK distributor, call:

1-800-544-PROX (1-800-544-7769)

Specifications in this manual are subject to change without notice. TURCK also reserves the rightto make modifications and makes no guarantee of the accuracy of the information containedherein.

Literature and Media questions or concerns?

Contact Marketing Services at TURCK USA: [email protected]

Automation Controls B0154 Proximity Sensors B2000Flow & Temperature B0155

Cordsets B2001 Capacitive Sensors B0149 multimodul B0144

New Literature from TURCK

The Industry Leader in Proximity Sensing,Cordsets and Interface Technology

Sensors DivisionSensors Catalog - B2000Flow Monitors Catalog - B0155email: [email protected]

Special Products DivisionCordsets Catalog - B2001Releco Relay Catalog - B0234email: [email protected]

Intrinsic Safety Products DivisionAutomation Controls Catalog - B0154multimodul Catalog - B0144email: [email protected]

InterlinkBTInterlinkBT Catalog - B9000Beckhoff Bus Terminal Catalog - B9005email: [email protected]

TURCK USA TURCK Canada TURCK Mexico InterlinkBTTURCK Inc.3000 Campus DriveMinneapolis, MN 55441Phone: (763) 553-7300FAX: (763) 553-0708Application Support:1-800-544-PROX (7769)

CHARTWELLELECTRONICS, INC.140 Duffield DriveMarkham, OntarioCanada, L6G 1B5Phone: (905) 513-7100FAX: (905) 513-7101

ICESA - MODICONAnt. Camino a Sta. Monica No. 7San Lucas Tepetlacalco54050 TlalnepantlaEdo. de MexicoPhone: (52) 5-397-8644FAX: (52) 5-398-9888

InterlinkBT3000 Campus DriveMinneapolis, MN 55441Phone: (763) 694-2300FAX: (763) 694-2399Application Support:1-888-546-5880

Printed in USA B1777 5/01

ProximitySensorsIndustry’s broadest line ofinductive and capacitiveproximity sensors.

FlowMonitorsMonitors for sensing theflow of liquids and gasesduring industrialprocesses.

InterlinkBTDevice-level interconnectand bus products forsensors and actuators.

Cordsetsand Junctions

Industry standard cordsetsand junction boxes

connect the most popularswitch and sensor styles.

InterfaceDevices

Interface and logicproducts for automation

and intrinsically safeenvironments.

w w w . t u r c k . c o m

turck - steven engineering · q08 with threaded picofast connector output part number id #...

Documents