twad tuticorin tender instructions

8/11/2019 TWAD Tuticorin Tender Instructions

http://slidepdf.com/reader/full/twad-tuticorin-tender-instructions 1/100

Improvements Water Supply Scheme to Thoothukudi Corporation BOQ -Package -I

(In figure) (in Words)

A Proposed Construction of Intake Well cum

Pump house

Civil works

1 Earthwork excavation for foundation and

depositing on bank within an initial lead of 10m and

an initial lift of 2m for the following classification of

soil including shoring, strutting,bailing out water wherever necessary and all other inc idental

charges etc. complete as per Standard

specification

1.1

In hard stiff clay, stiff block cotton, gravel, stoney

earth, shales, murram, and earth mixed with small

size boulders and hard gravelly soil - for

1.2 0m to 2m 138.00 Cum - -

1.3Medium rock and Dense medium rock (MR &

DMR)not requiring blasting. - -

1.4 0m to 2m 138.00 Cum - -

1.5Hard granite measured in solid including blasting &

stacking.- -

1.6 2m to 3m 275.00 Cum - -

1.7 3m to 4m 275.00 Cum - -

1.8 4m to 5m 275.00 Cum - -

1.9 5m to 6m 220.00 Cum - -

Eastimated

Rate in RsQuantity

Tender Inviting Authority: The Commissioner, Thoothukudi City Municipal Corporation

Package -I

Name of Work:-Construction of Raw Water Intake well -cum-Pump house( 14.00m inner dia.), Providing Raw Water Pumping main with SWMS Pipe size of 1100 mm dia. from

Intake Well to WTP with length of 10.85KM , Construction of 84 MLD Capacity Water Treatment Plant and Providing SCADA System for Thoothukudi WSIS.

Contract No:- E3/22751/2008

Bidders Name:

AmountItem

No.Description Unit

Rate in Figures to Entered by the Bidder

Bidder sign 1 of 100 December-2012





Eastimated

Rate in RsQuantity Amount

Item

No.Description Unit


2 PCC 1:3:6, using 40mm size HBG stone for

foundation including mixing, placing, ramming,

curing and finishing etc. complete in accordance

with the standard specification.

- -

1.50m depth to upto 4.50m below GL 44.00 Cum - -

3 Providing and laying in posit ion Reinforced

cement concrete of M30 (sulphate resistance

cement ) Design Mix using and down size graded

granite metal machine mixed, concrete laid in

layers not exceeding 15cms.thick, vibrated for all

works in foundation and plinth andground floor

level for roof slabs, staircase, l intles, retaining

walls, return walls, walls (any thickness) including

attached plasters, columns, piers, abutments,

pil lars, posts, bed blocks, anchor blocks, plain

window cills, f illets etc., including cost of allmaterials, labou, HOM of machinery, curing

complete as per Specification.

- -

3.1 Below Ground Level - -

3.2 Upto 1.50m depth below GL 31.50 Cum - -

3.3 Above 1.50m depth to upto 4.50m below GL 200.50 Cum - -

3.4 Above Ground Level - -

3.5 Upto 1.50m above GL 32.50 Cum - -

3.6 above 1.50m to upto 4.50m above GL 134.00 Cum - -

3.7 above 4.50m to upto 9.00m above GL 14.50 Cum - -

3.8 above 9m to upto 12.50m above GL 45.50 Cum - -

4 Providing and removing centering, shuttering,

strutting, propping etc. for columns, pillars, piers,

post and struts, square / rectangular / polygon in

plan including cost of all materials, labour

complete as per specificatios.

- -






Eastimated


Item

No.Description Unit


4.1 Below Ground Level - -

4.2 Curved surface 405.50 Sqm - -

4.3 Above Ground Level - -

4.4 up to 3.30m above GL 354.50 Sqm - -

4.5 3.30m to 4.30m 123.00 Sqm - -

4.6 4.30m to 5.30m above floor slab 224.50 Sqm - -

4.7 5.30m to 6.30m 29.00 Sqm - -

4.8 6.30m to 7.30m 90.50 Sqm - -

4.9 7.30m to 8.30m 29.00 Sqm - -

4.10 8.30m to 9.30m 29.00 Sqm - -

4.11 9.30m to 10.30m 37.50 Sqm - -

4.12 10.30m to 11.30m 244.50 Sqm - -

5.1 Providing, in position Fe-415 Steel

Reinforcement in all RCC Work at all levels &

heights, including supplying,reciling, straightening,

cleaning, cutting, cranking, lapping, bending and

placing and fixing in position with 16/18 gauge

SWG annealed soft iron wire or welding, high yield

strength deformed bars conforming to IS : 1786,

for reinforced concrete works at all locations and

levels, inc luding handling and transport etc. ,

complete.

55.00 MT - -






Eastimated


Item

No.Description Unit


5.2 Providing Fusion Bonded Epoxy coating not less

than 175microns thickness and upto 300 microns

to reinforcement of all diameters as per IS

13620/1993 including testing of coating at

plant.The cost is inclusive of cost on account of careful handling, PVC coated binding wires,

touchup material suppl ied by coating agency,

repair work, loading, unloading and strengthening

of bent rods etc., completeas per specification and

as directed by the Engineer in charge. (inclusive of

all taxes)

- -

5.3 For 8mm to 16mm 38.50 MT - -

5.4 For 20mm to 32mm 16.50 MT - -

6 Brick work in CM 1:5 (One cement & five

Sand)using ground moulded chamber bricks of

s ize 9"x4 3/8"x2 3/4" standard specif icat ionincluding finishing, curing etc., complete complying

with standard specification-10cum and as directed

by the Site Engineers.

- -

6.1 above 4.50m to upto 7.50m 17.50 Cum - -



7 Plastering with CM 1:5 mix 20mm thick for walls

inside complying with standard specification and

as directed by the Engineer.

260.00 Sqm - -

8 Plastering with CM 1:5 ,12mm thick for outsidewalls complying with standard specification and as

directed by the Engineer.

341.00 Sqm - -

9 Providing , laying finishing of Granolithic flooring

with CC 1:1:2 (One of Cement, One of Sand, Two

of 6-10mm Metal) 50mm thick complete with

vacuum dewatered flooring and dummy joints,

groove cutting with concrete saw and groove filled

with polymer bitmen etc. complete as per

specifications.

159.00 Sqm - -






Eastimated


Item

No.Description Unit


10 Painting top of roofs with bitumen of approved

quality at 17kg per 10sqm impregnated with a coat

of coarse sand at 60 cudm per 10sqm including

cleaning the slab surface with brushes and finally

with a piece of cloth lightly soaked in kerosene oilcomplete

- -

10.1With residual type petroleum bitumen of

penetration 80/100159.00 Sqm - -

11 Weathering course with concrete broken brick

jelly 20mm size in pure slaked lime (no sand to be

used ) RCC roofing slab the proportion of broken

brick jel ly to l ime being 32:12.5 well beaten with

wodeen beaters giving required slops and the

thickness etc.,

159.00 Sqm - -

12 Finishing the top of roof (weathering course) with

one course of pressed tiles of size 20cm x 20cm x

2cm using CM 1:3 mixed wi th crude oil 10% by

weight of cement painted with same oiled mortar complying with standard specification and as


159.00 Sqm - -

13 Fabrication, supply, delivery and fixing of outside

M.S Ladder of 45cm clear wide made out of

50mmx50mmx6mm M.S angle for sides and steps

in 16mm MS plain rods fixed at 30cm c/c welded

jointed etc., providing with suitable side supports,

clamps and locking arrangements provided with

two coats of approved enamel paint over one coat

of red oxide paint, for providing access to floor top

of Pump room of suitable inclined length, including

bottom anchorage and transportat ion and as

directed by the Engineer. The rate includes

concrete bed block in CC 1:2:4 using 20mm HBGS

at top and bottom of suitable size with necessry

anchor bolts.

- -






Eastimated


Item

No.Description Unit


13.1 MS ladder 3.00 Nos - -

14 Supply, delivery and fabrication of MS doors and

windows with outer frame and shutter frame in MS

angle of s ize 40mm x 40mm x 6mm with MS flat

25mm x 25mm x 6mm and MS sheet of 18 guage

including ventilating arrangements using 20mm

square MS rods with locking arrangements

including two coats of approved enamel paint over

coat of red oxide including cost of angles, plates,

sheets, fabrication charges, cost of hold fast and

transportation charges etc., complete.

- -

14.1 Fully panelled Double leaf -Door (1.00X2.50m) 1.00 Unit - -

14.2 Fully panelled Double leaf - Widow (0.90X1.20m) 14.00 Unit - -

14.3 Ventilator (0.60X0.45m) 14.00 Unit - -

15 Supplying, Fabricating and fixing of chequered

plate using Steel 12mm thick flat, 75mm width at

25mm c/c including welding, fixing accessories,

labour charges etc., complete as per specification.(

in size 8.15M X 1.60M)

574.00 Kg - -

16 Supplying, fixing of PVC insulated Rungs. 68.00 Nos - -

17 White washing two coats for walls inside and

outside with good quality of white cement

complying with standard specification and as


622.00 Sqm - -

18 Painting two coats with approved cement paint

over cement plastered wall sur face (outside)

including cleaning, preparing the surface and

curing etc., complete and as directed by the

Engineer.

341.00 Sqm - -

19Providing and applying two coats of approved

quality oil bound distemper over one coat of

primer on interior surfaces wherever specified, for :

260.00 Sqm - -






Eastimated


Item

No.Description Unit


20 Supplying and f ixing in posit ion of 110 mm OD

PVC rain water pipe from top of roof slab to G.L.

with specials etc. complete and as directed by

Enginner.

56.00 RM - -

21Formation of temperory bunds to divet the flow andmaking the intake well inc luding dewatering,

cleaning etc., complete.

3125.00 Cum - -

22

Removal of surplus earth for Temperory bunds

including all labour charges and lifting charges etc.

complete.

3125.00 Cum - -

23Provision for clearing Juliflora jungle with uprooting

for Intake area3300.00 Sqm - -

24 Supplying and f ixing of 900mm DI K7 Pipes for

Inlet from river to Intake well, fixing with required

size of the Intake strainer including all materials

and labour charges etc.complete.

8.00 RM - -

25 Supplying and fixing of 900mm DI Butterfly valves

with required length of the shaft inc luding all

materials and labour charges etc.complete.

4.00 Nos - -

B Mechanical Works - -

26 Supply and fixing of Pipes & Accessories including

all materials and labour charges etc,. Complete as

per standard specificaion.

- -

26.1 1118X 10 mm MS pipe in Non standard length 1720.00 Kg - -

26.21118mmdia X 400mm dia. 45degree Tee in MS -

2.20M Length1256.00 Kg - -

26.3 1100mm dia 90 degree MS bend 553.00 Kg - -

26.4 200mm dia. Dismantalling Joint MS 128.00 Kg - -

26.5 200mm X 400mm dia.Taper in MS 212.00 Kg - -

26.6 400mm dia. Non return valve in CI 4 Nos - -

26.7 250mm dia. Sluice valve CI 4 Nos - -

26.8 150 mm dia DAV in 1118 mm Air valve in MS main 1 No - -






Eastimated


Item

No.Description Unit


27 Providing and fixing 150 mm dia Bourden pressure

gauge of approved make with inline siphon tube

and pulsation damper, one number for each pump

and one number on common header, tapping

suitable holes at appropriate places and fixing theguages etc complete

5 Nos - -

28 Design,manufacture,Supply and Erection and

commissioning of Raw water Vertical Turbine

pump 1500 RPM.water lubricated having a

column's length of 10m pump having a capactity

of 61000 LPM (Intermediate) against a rated head

of 64m and suitable for parallel operation to deliver

84 MLD (2 working and 2spare)

4 Nos - -

29 Design and Manufacture, Supply and Erection of

commission of 3.3KV, 3Phase, 50cycles - 600HP

(350KW)- 64M head vertical Squirrel Cage

Induction motor for the above pump confirming IS

325-IP Class 55 protection - Class F insulation.

4 Nos - -

30 Supply and fixing of 5.00 MT capacity Electrical

Overhead Travelling Crane (12.50M Span length)

of required chain length with necessary fittings etc.

complete as per the Standard Specification.

1.00 Set - -

C Electrical Works:- - -

31 Supply and Erection of 1800KVA - 11 KV/3.3KV, 3

Phase 50 Hz,oil immersed natural air cooled, core

type Cont inuous rat ing outdoor dis tr ibut ion

Transformer with copper winding arranged for DY

11 connection with with neutral.The Transformer

should be confirming to IS: 2026 with off load tap

Switch for +5% and -10% in steps of 2.5% on HV

Side.The Transformer Shall be Supplied with first

fil ling of oil as per Is:335 consisting of fittings and

accessories confirming to I.S shall be provided.

2 Nos - -

Six Pole Structure - -






Eastimated


Item

No.Description Unit


32 Supply and Erection of Six Pole Structure Suitable

for 11KV Line 175 x 85 mm RSJ having lenth of

9.145 mts and cross channel s ize 100 x 50 mm

with suitable angles etc, strain Disc insulators to

receive two incoming 11KV supply incoming E.B

supply. A.B Switches with Operating arrangements

, Horn Gap fuse, lighting arrestors, Support

insulators with necessary copper pipe busbars

jumbering to the A.B Switches, H.G insulators etc,

with '0' SWG copper wire.

1.00 Set - -

32.1 Construction of Transformet Plinth 2 Nos - -

32.2Chain link fencing with Gate inc luding TNEB 2

Poles1 No - -

32.3 Erection of T ransformer 2 Nos - -

33 Supplying, Eraction and Commissioning of SF 6types -630A -350 MVA 11KV Circuit bracker

Outdoor type for transformer protection. Complete

with all protections , drawout type at receving sub

station

2.00 set - -

34 Supply,erection and testing of one 11KV/433V

250KVA Transformer, with copper winding, oil

cooled natural air cooled ,OFF load tap changer on

HV side complete with all fittings as per IS

2026.The Transformer should be tested as per IS

335 or and any other latest IS.

1.00 Set - -

35 Supply and Erection of one two pole structure

mount ing one 250 KVA,11KV, pole mounted

Transformer, AB switch,DOF etc.

1.00 Set - -

36 Supply and erection of HT panel with two nos. of

3.3KV,630A-350MVA Vaccum circuit Breaker

complete with all protection relays,overcurrent,

short circuit,no volltage relay etc. to be erected in

the receiving substation control panel.

1.00 Set - -

37 Supply and erection of 3.3KV HT panel consisting

of following equipments complete with all

protection relays etc. to be erected in the Pump

House.

- -

37.1a) Incoming : 3.3KV - 630A/350KVA VCB/SF6 -

2Nos.1 No - -






Eastimated


Item

No.Description Unit


37.2b) Out going panel : 3.3KV - 630A/350KVA

VCB/SF6 - 4Nos.1 No - -

37.3c) Bus coupler panel : 3.3KV - 630A/350KVA

VCB/SF6 - 2Nos.1 No - -

38 Supplly and Erection of one MV panel at the sub

stat ion with following Switch Gears at the sub

station

400 A - MCCB 4n - 1 No.

63A - MCCB TPN - 2 No.

Volt meter 1No

Ammeter 1 No

Pilot Lamps 1 Sets

Selector Switch 2 Nos

1 set - -

39 Supply and Erection of MV Panel as per

specification with fol lowing switch gears, to be

erected in the Pump House.

200A-MCCB-TPN-1

63A MCCB TPN-3Voltmeter and Ammeter each 1

Pilot Lamps 1 Sets,Selector Switch 2 Nos

1 Set - -

40

Supply and erection of 48V DC Battery Alkhali type

of with 100AH capacity for protection system and

metering complete with suitable Battery charger to

be erected inthe sub station control room and one

in Pump House control room.

2.00 Set - -

41 Capacitor Panel - -

41.1Supply and erection of HT 3.3KV Capacitor bank

with APFC unit. For 400KW Motor.4 Nos - -

42 Starter - -

42.1Soft Star ter FCMA Panel sui table for 400KW -

3.3KV to be erected in Pump House.4 Nos - -

43 ST cables - -

43.1 Supplyand layingof 3.3KV, 1800KVA, 2 Runs of 3

core x 150 Sq mm XLPE cable with Aluminium

conductor armoured. The cable shall be laid on a

prepared cable duct from Transformer yard to

Pump House.

1000.00 RM - -






Eastimated


Item

No.Description Unit


43.2Supply and laying of 11kv XLPE cable with

aluminium conductor armourd 3 core 50 sq mm60.00 M - -

44 Supply and laying of 2RX4CX240 Sq.mm PVC

insulated PVC sheathed armoured cable - 1100 V

Grade with Aluminium conductor on prepared

cable duct from auxiliary Transformer to MV cable

panel in the sub station

60.00 RM - -

45

Supply and laying of 4 core 6 sq.mm PVC

sheathed armourd cable with copper cable from

control pannels for street light control

600.00 M - -

46 Supply and provision of 2 core 1.5 sq.mm PVC

insulated with copper conductor for connection

from street light fuse box to lighting fixure

350.00 M - -

47 Supply and laying of one run of 4CX150 Sq mm.

1100V Grade cable PVC insulated, PVC Sheathed

with Aluminium conductor from control panel to MV

panel at pump house.

250.00 RM - -

48 Supply and laying of 3.3KV 3 core 95 Sq mm.

XLPE insulated cable from MC Panel strater to

motor terminal.(4 motor)

100.00 RM - -

49Cable gland:

11KV cable Termination kit RAYCHEN Make 3

core 50 Sq mm

4 Nos - -

49.1 3.3KV cable Termination kit 3 core 150 sq mm 4 Nos - -

50 Earthing - -

50.1 As per IS specification 3043 with necessary

Masonary Work for earthing control

pannel,moters,Street Light Mast etc.

12 Nos - -

50.2 Earthing of 1800KVA Transformer sub Station as

per IS 3043 including provision of copper flat for

nuteral earthing GI flat for body earthing &

masonary work etc.

2 Nos - -

50.3 25 X 3 G.I Strips for earthing of equpements 50.00 kg - -

50.48 SWG G.I. wi re for connect ing wire from earth

electrode to equipement50.00 kg - -

51 Provision of Safety Equipments: - -

51.1Rubber mat 6 mmthickof 1.1 KVgradeof size2m

x 11m20 Nos - -






Eastimated


Item

No.Description Unit


51.2 - Fire Buckets - 3 nos with metalic stand 2 Nos - -

51.3 - Fire extinguishers 2 kg chemical powder type 4 Nos - -

51.4 - Caution Board 12 Nos - -

51.5 - First aid box Metallic 2 Nos - -

51.6 - Shock Treatment Chart 2 Nos - -

51.6 - Hand Gloves 4 Nos - -

52 Genral Lighting - -

52.1 Run of 2 of 2.5 Sq.mm. PVC unsheathed copper

SC cable in conduit pipe for mains contiuous earth

connection by 14 SWG TC wire.

800.00 RM - -

52.2 Supply and carryout concealed wiring with PVC

conduit with 4Cx2.5Sqmm. Copper wire,PVC

insulated-660V from DB to sub Distribution with

earthing.

50.00 Nos - -

52.3 supply and fixing of 150W Sodium vapor lamps for

out door Lighting complete as per for Specification

20.00 Nos - -

52.4 supply and f ixing Internal Light of 18W/36W

including switches and board etc.complete as per

for Specification

12.00 Nos - -

52.5 supply and fixing Exhaust fan of 1200mm Sweep

with necessary fittings etc.complete as per

Standard Specification.

8.00 Nos - -

52.6 supply and fixing Ceiling fan 48" Sweep energy

effic iant fan for of fice with necessary f it tings

etc.complete as per Standard Specification

8.00 Nos - -

52.7 supply and fixing Lighting distribution board 8 way

TPN DB with necessary fittings etc.complete as

per Standard Specification

2.00 Nos - -

53 Supply and erection of SWAGED type welded

poles as per specification ISS 2713/69 overall

length 6m to be fixed with fuse box fixed in mast

20.00 Nos - -






Eastimated


Item

No.Description Unit


54 Supply and fixing of 8 way single pole and nutral

MCB sheet steel encloser distribution board with

one number 32A TPN MCB and 8Nos 6A SP-MCB

outgoing, flush with wall in concelad wiring for

street light control

4.00 Sets - -

55 Supply and erection of 3.3KV / 110V-Potential

Transformer for metering and protection2.00 Nos - -

56 Supply and erection of 3.3KV /110V Current

Transformer 500/5A Protection and metering2.00 Nos - -

D Other Infrastructure Work. - -

1 ) Approach road :- - -

57 Providing laying granular sub base as per table

400-1/400-2 & Grading-1 of MORTH & H Revision

IV with sand gravel grushed stone or quarry fines

or any other granular material or combination of

those to give CBR of 30 on prepared sub grade in

accordance with the requiremet specification for

widening portion with plant mix methord

4125.00 Cum - -

58 Providing and laying WBM 75mm compacted

thickness with Grade II metal using 1.00cum of 63

- 45mm HBG metal with 0.24 cum of gravel for

blindage per 10sqm including cost and

conveyance of all materials and stacking them at

site, to departmental gauge for premeasurement,

labour charges for spreading metal and gravel,

hand packing to camber, watering with all leads of

water and compaction by 80 - 100KN power roller

including hire charges and fuel charges for power

roller including hire charges and fuel charges for

power roller,water sprinkle and all other tools and

plants employed, barricarding etc., complete as

per clause 404 of MOST specification

247.50 Cum - -






Eastimated


Item

No.Description Unit



thickness with Grade III metal using 1.00cum of

53 - 22.4mm IRC size HBG metal with 0.24 cum

of gravel for blindage per 10sqm including cost

and conveyance of all materials and stacking them

at site, to departmental gauge for

premeasurement, labour charges for spreading

metal and gravel, hand packing to camber,

watering with all leads of water and compaction by

80 - 100KN power roller including hire charges and

fuel charges for power roller including hire charges

and fuel charges for power roller,water sprinkle

and all other tools and plants employed,

barricarding etc., complete as per clause 404 of

MOST specification

247.50 Cum - -

60 Applying tack coat of 3kgs/10sqm over the WBM

surface treated with premix using 4kgs of bituminous binder for 10sqm area including cost of

binder labour for applying the required quantity to

bitumen as tack coat manually as per

specification.503

3300.00 Sqm - -

61 Providing and laying 25mm thick Dense

Bituminous Macadam (DBM, grading-2) course

using 80/100 grade of bitumen complete as per

MORTH Technical Specification

3300.00 Sqm - -

2 ) Barbed wire Fencing and M.S.Gate ( 36 m x

50 m) :- - -

62 Earth work excavat ion for foundat ion inc luding

depositing an bank with all lead including shoring,

strutting, barricading, danger lighting.

- -

63 do- In all soil including soil mixed with boulders

upto 30 Cms. size and exclusive of disintegrated

rock.

13.06 Cum - -

64 Providing and laying C.C. 1:3:6 proportion for

foundation (Screed layer) with 40 mm and down

size of approved gradation hard broken granite,

trap basalt or with any other approved hard

aggregate including cost and conveyance of all

materials with an all lead & lifts including plywood /

steel form work, machine mixing, laying, tamping,

curing etc., complete.

2.14 Cum - -






Eastimated


Item

No.Description Unit


65 Providing and laying in position reinforced cement

concrete of mix 1:2:4 with 20mm (M15) and down

size graded granite metal, machine mixed,

concrete laid in layers not exceeding 15 cms thick,

v ibrated for all works in foundat ion plinth and

ground floor level for retaining walls, return walls,

walls (any thickness) including attached plasters,

columns, piers, abutments pillars, posts, struts,

buttresses, str ing or lacing courses, parapets,

coping, bed blocks, anchor blocks, plain window

cil ls, fil lets etc., including cost of all materials,

labour, HOM of machinery, curing, complete as per

specifications.

11.01 Cum - -

66 Providing TMT steel reinforcement for R.C.C work

including straightening, cutting, bending, hooking,

placing in position, lapping and / or welding

wherever required, tying with binding wire andanchoring to the adjoining members wherever

necessary complete as per design (laps and

wastage shall not be measured and paid) cost of

materials, labour, HOM of machinery complete as

per specifications.

825.75 Kg - -

67 Providing and finishing external pil lers surface in

one coat with water proof cement paint of

approved brand and shade to give an even shade

after throughly brooming the surface to remove all

dirt and loose powdered mateial, free from mortar

drops and other foreign matter cost of materials,

labour, complete as per specifications

109.14 Sqm - -

68 Providing and fixing M.S. gate inclding paintingand as directed by the Engineers.

486.00 Kg - -






Eastimated


Item

No.Description Unit


69 Providing to work site and f ixing R.C.C. pole of

2.40 m height with 0.15m square at bottom and

0.12 m square at top in C.C. 1:2:4 using 20 mm

and down size granite or basalt metal with 4 Nos.

of 10 mm dia M.S. reinforcement and 17 Nos. of 6mm dia stirrups. The pole will be embeded in C.C.

1:3:6 using 20 mm and down size granite or basalt

or trap metal for foundation of size

0.50x0.50x0.50m with necessary earth work for

barbed wire fencing including curing and including

cost of steel etc. , complete with al l lead. for all

material.

103.00 Nos - -

70 Providing barbed G.I. wire fencing of 12 x 12

gauge to worksite and drawn into stone pillars or

iron pillars or RCC pillars or Poles including

drawing in holes wherever necessary excluding the

cost of pillars/poles but including the cost of

barbed wire and binding wire and labour charges

for fixing barbed wire either vertically or

horizontally, tieing etc., complete with all lead & lift.

2467.00 RM - -

E Proposed Construction of 210m Length RCC

Pipe Caring Bride (PCB) from Pump house to

river bund including materials labour charges,

dewatering etc,.complete as per drawings.

- -

Civil works - -




soil including shoring, strutting,bailing out water wherever necessary and all other inc idental


specification.

- -

71.1 In hard stiff clay, stiff block cotton, gravel, stoney


size boulders and hard gravelly soil.

- -

71.1.2 0m to 2m 66.00 Cum - -

71.2 Medium rock and Dense medium rock not

requiring blasting. - -






Eastimated


Item

No.Description Unit


71.2.1 0m to 2m 66.00 Cum - -


stacking - for 0m to 2m - -

71.3.1 0m to 2m 131.00 Cum - -

72 PCC 1:3:6, using 40mm size HBBG stone for




- -

72.1 1.50m depth to upto 4.50m below GL 18.00 Cum - -

73 Providing and laying in posit ion Reinforced

cement concrete of M30 Design Mix using and

down size graded granite metal machine mixed,

concrete laid in layers not exceeding 15cms.thick,

v ibrated for all works in foundat ion and plinthandground floor level for roof slabs, staircase,

l intles, retaining walls, return walls, wal ls (any

thickness) including attached plasters, columns,

piers, abutments, pillars, posts, bed blocks, anchor

blocks, plain window cills, fillets etc., including cost

of all materials, labou, HOM of machinery, curing

complete as per Specification.

- -

73.1 Upto 1.50m depth below GL 50.00 Cum - -

73.2 Upto 1.50m depth above GL 6.68 Cum - -

73.3 1.50m depth & upto 4.50m below GL 345.00 Cum - -






Eastimated


Item

No.Description Unit


74 Centering for sides and soffits for RCC members

(plane surface) for the following works including

shuttering, strutting to the centering and providing

supports etc. complete using M.S. sheets of size

90mm x60mm and BG 10 gauge stiffened with MS

angles of size 25mm x25mm x3mm laid over

country wood joists of size 10cm x63mm spaced at

about 90cm c/c and supported by casurina props

of size 10cm to 13cm dia. spacing at 75cm c/c and

as directed by the Site Engineers. The centering

materials should be supplied by the contractor and

centering removal after the specified stripping time

of the concrete as per IS 456-1978

- -

74.1 Upto 3.30m below GL 136.50 Sqm - -

74.2 Upto 3.30m above GL 134.00 Sqm - -

74.3 Upto 3.30m to 4.30 1579.00 Sqm - -

75 Providing, in position Fe-415 Steel

Reinforcement in all RCC Work at all levels &

heights, including supplying,reciling, straightening,

cleaning, cutting, cranking, lapping, bending and

placing and fixing in position with 16/18 gauge

SWG annealed soft iron wire or welding, high yield

strength deformed bars conforming to IS : 1786,

for reinforced concrete works at all locations and

levels, inc luding handling and transport etc. ,

complete.

60.00 MT - -

75.1 Providing Fusion Bonded Epoxy coating not less




plant.The cost is inclusive of cost on account of

careful handling, PVC coated binding wires,





all taxes)

- -






Eastimated


Item

No.Description Unit


75.1.1 For 8mm to 16mm 42.00 MT - -

75.2.1 For 20mm to 32mm 18.00 MT - -

76 Formation of temperory bunds to divet the flow andmaking the Foundation including dewatering,

cleaning and Removal of surplus earth etc.,

complete.

937.50 Cum - -

77 Supply and fixing of outdoor type Steel cable tray

as per requi red size. Inc luding f ixing charge,

materials etc., complete as per standard

specification.

200.00 RM - -

78 Supply and fixing of MS hand rails as per required

size. Inc luding f ixing charge, materials etc. ,

complete as per standard specification.

400.00 RM - -

79Expansion joint using 25mm thick Plastromatic

sheet9.94 Sqm - -

F Proposed Construction of Staff Quarters at

Head Works site and Water Treatment Plant

Site including Materials and Labour charges

etc,. Complete as per drawings and as directed

by the Engineers.

- -

Bill of Quantities for Two Quarters - -

80 Earth work excavation for foundation in Hard stiff

c lay, st if f black cotton, hard red earth, shales

murram, gravel,stoney earth and earth mixed with

small size boulders SS.20B and Sand,silt or other

loose soi l, wet sand,or sil t not under water, l ight

black cotton soil, sandy loam ordinary soil and to

ful l depth as may be directed except in hardrock

requiring blasting inclusive of shoring shuttering,

,and baling out water wherever 'necessary refilling

the sides of foundation with excavated soil other

than sand in layers of 15cm thick well rammed and

completed depositing the surplus excavated soil

with in the compound in places shown by the

departmentalofficers with intial lead and lifts and

cleaning and levelling the site etc.,complete

- -

80.1 Footings - First Depth 370.00 Cum - -






Eastimated


Item

No.Description Unit


80.2 Plinth Beam 60.00 Cum - -

81 Supplying and filling in foundation and basement

with filling sand in layers of not more than

15cm.thick well rammed watered and compacted -1m3 etc. , complete complying with standard

specification.

100.00 Cum - -

82 Plain Cement concrete 1:4:8 (one cement, four

sand, eight aggregate) using 40mm gauge hand

broken granite stone jelly for foundation including

dewatering if found necessary and laid in layers of

not more than 15 cm thick and compacted,etc.,

complete complying with standard specfication.

100.00 Cum - -

83 Centering for soffits of RCC slabs of plane surface

like lintels, beams ,etc.,including strutting 3m high

using mi ld steel sheets of s ize 90cm X 60cm X

and B.G 10 stif fened with M.S angles of size25mm X 25mm X 3mm laid over silver Oak (C.W)

joists of size 10cm X 6.5cm (spaced at about 90cm

c/c )and supported dy casurina props of 10cm to

13cm dia (spaced of 75cm C/C) complying with

standard specification and directed

- -

83.1 Plinth Beam 280.00 Sqm - -

83.2 Column 660.00 Sqm - -

83.3 Beams and Slabs 2120.00 Sqm - -

84 Reinforced Cement concrete 1:1.5 :3 (one

cement,one and half sand & three course

aggregate)using 20mm ,gauge hand broken/ and

broken granite stone for al l RCC items of works

excluding centeringshuttering and cost of

reinforcement but including curing etc.,complete

and also including fixing fan clamps and fixtures

in RCC works wherever necessary as directed by

departmental officer etc., complete.

- -

84.1 Upto Basement 80.00 Cum - -






Eastimated


Item

No.Description Unit


84.2 Ground floor 200.00 Cum - -

84.3 First floor 170.00 Cum - -

84.4 Second Floor 10.00 Cum - -

85

Suppling and fabricating and placing in position

MS (or) R.T.S. bar for reinforcement to all RCC

works as per the design given including cost of

steel and binding wire also in all floors.

56.00 MT - -

86

Supplying and fil ling the basement with Gravel

fil ling in layers of not more than 15cm.thick well

rammed watered and compacted - etc., complete

complying with standard specification.

310.00 Cum - -

87

Brick work in CM 1:5 (one cement & f ive sand)

using II nd class ground moulded bricks of size

9"X43/8"

X 23/4"

standard specification includingfinishing, curing,etc., complete complying with

standard specification

- -

87.1 Upto Basement 90.00 Cum - -



87.4 Second Floor 50.00 Cum - -

88 Brick Partition walls in CM 1:3(one cement & three

sand) using II nd class ground moulded bricks of

size 9"X43/8"X23/4" using hoop iron reinforcement 2Nos of 6mm dia M.S.rod at every three alternate

layers and the cost shall inclusive of iron

reinforcement, Brick work etc, complete as per

standard specification.

- -








Eastimated


Item

No.Description Unit


89 Plain Cement concrete 1:2:4 (one cement two

sand and four aggregate) using 20mm gauge hand



not more than 15 cm thick and compacted,etc.,


10.00 Cum - -

90 Supply and f ixing of M.S Grills with Doors and

Windows with one coat of Red oxide with Primer

including all costs such as welding,grinding and

fabrication charges, cost and conveyance of all

materials to site etc,complete as per standard

specification.

10960.00 Kg - -

91 Special Ceiling Plastering with cement mortar 1:3

mix (One cement and three sand) 10 mm thick

including cost and conveyance of all materials,

f inishing, cur ing, and al l labour charges etc.

complete as per standard specification

2160.00 Sqm - -

92 Plastering with cement mortar 1:5 (One cement

and five sand) ,12 mm ,thick in all floors including

cost and conveyance of all materials to site

etc,complete as per standard specif icat ions

(S.I.306)

2120.00 Sqm - -

93 Weathering Course with Concrete Broken Brick

(S.I.No.278) & ( P & D) Data 54.Jelly 20mm gauge

in pure slaked lime (no sand to be added) over roof

slab,the proportion of brick jellyto lime being '32 to

12.5 well beated with wooden beaters for giving

required slope and thickness 80mm as directed by

the departmental officers.etc., complete.

38.00 Cum - -

94Finishing the top of roof with one course of

machine pressed tiles of size 200 mm x 200 mm x

20 mm of approved quali ty in Cement Mortar 1:3

(One Cement add three sand) 12 mm thick mixed

with water proofing compound conforming to ISS

at 2% by weight of cement used and the joints

pointed neatly to ful l depth of tiles with the same

cement mortar mixed wi th red oxide and water

proofing compound including curing etc., complete

464.00 Sqm - -






Eastimated


Item

No.Description Unit


95 White washing two coats with freshly burnt shell

l ime white in colour in all f loors including cost of

l ime and other materials brushes scaffolding

charges etc.complete complying with standard

specification and as directed.

2160.00 Sqm - -

96 Painting 2 coats with approved cement paint over

cement plastered wall surface, ceiling and other

new surface and including cleaning, preparing the

surface and curing etc., complete

2060.00 Sqm - -

97 Supplying & f ixing door shutters for Mediun

Density Fiber Board of exterior grade 35 mm

thick,single leaf conforming to IS:12406/1989 with

35x12 mm T.W.Lipping on all edges with

necessary adhesives and CP screws complying

with standard specifications. The rate is inclusive

of threee coats of best quality varnish but

excluding cost of furniture fittings.such as 300 mmtower bolt 2nos,200mm towerbolt I no. 300mm

Aldrop 1 No. Alu handle ornamental type 2

Nos,and 1 No. Door stopper etc complete.

102.00 Sqm - -

98 Supplying and fixing Teak wood Door Panelled

shutter wi th frame for door fully panelled with

25mm thick T.W. Planks ,the door Shutter Styles

wil lbe of75mm X 40mm & Top rai lwil lbe of 100 X

40mmthe Lock rai l wil l beof 125mm X 40mmand

the bottom rail will be 150mm X 40 mm and Frame

size 100 X 100 MM and both sides should be

finished with 4mm thick venner, including cost of

furniture fittings and cost of wind appliances and

labour charges for fixing furniture etc., and fixing

up shutters in position and Best French (lac)

pol ishing with 2 coats T.W. Doors,Windows,

Ventilators, including cleaning the surfaces etc.

complete complying with standard specifications.

18.00 Sqm - -






Eastimated


Item

No.Description Unit


99 Supply and f ixing of Stainless steel (Salem

stainless steel) Door frame ( Box section using

stainless steel plate of 1.6mm thick) of size

100mm X 60mm with a rebate of 30 / 35mm X

15mm on one side of theframe including supplyingand fixing dovetai l splayed end stainless steel

holdfast etc.complete as per standard

specification.

246.00 RM - -

100 Supply and fixing of PVC Solid Doors using

19gauge 19mm MS Sq,tubes for styles and

f rames, 15mm MS Sq.tubes for to, Lock and

bottom rai ls. The Steel Tubes shall be covered

with 5mm thick Solid PVC sheets. Shutter using

5mm thick sol id PVC sheets for panel ling shall

r igidly fixed in position including furniture and

fittings. The over all size of styles shall be 50mm X

30mm. The over all size of top rai l, Lock rai l and

bottom rai l shall be 75mm X 30mm. The over allsize of frames shall be 50mm X 45mm with

suitable tabate for housing the shutter etc,

complete as per standard specification.

26.00 Sqm - -

101 Painting two coats over the new wood work with

Ready Mixed Paint of approved quality and colour

without priming coat including the cost all

materials etc.,complete, in all floors.

220.00 Sqm - -

102 Paint ing two coats over the new iron work with

Ready Mixed Enamel Paint of approved quali ty

and colour without priming coat including the cost

all materials etc.,complete, in all floors.

274.00 Sqm - -






Eastimated


Item

No.Description Unit


103 Supplying and f ix ing in posi tion of alulminium

anodised colour matt finish Louvered Ventilator.

The outer frame willbe 62x38x2mm @ 1.17Kg / m

and the louvers with moving arrangements will be

made wi th Alu. Channel of s ize 60x30x4 mm @

1.27 kg /m with necessary glass pans for louvers

4mm thick Al. Clips, including all materials, labour

& power consumption charges required for

fabrication if necessary chipping dismantling

making holes in RCC columns,beamsor masonry

wherever necessary with power drill to the extent

required and make good to the original conditions

after fixing etc., complete. The Aluminium sirface is

to be anodised with matt finish under electrically

controlled condition in accordance with ISI

specification 1868/1962 of anodic film thickness of

not less than15 microns (fifteen) for all sections. Allthe materials should be got approved by the

Engineer-in-charge before fixing in position as

directed.

12.00 Sqm - -

104 Supplying and fabrication and fixing in position of

anodised natural colour matt f inish sliding

window in three track in all floors with following

sizes. All the three shutters with slinding

arrangements, the bottom section should have

Gutter arrangements so as to drain the water

enter ing and made with extruded aluminium

section for outer frames as shown below with

necessary accessories such rubber beading.

Aluminium clips, rubber beading,handle and fixing

4mm thick clear sheet glass including all required

for fabrication etc., complete.Necessary

dismantling making holes in RCC columns, beams,

masonry wherever necessary with power drill to

the extent required and made good to the original

conditions after fixing as directed by the

departmental officers.The Al.Surfaces is to be

anodised with matt finish under elect rically

condit ion in accordance with ISI 1868/1962

specification for an average anodic film thick of not

less than 15 microns.

274.00 Sqm - -






Eastimated


Item

No.Description Unit


105 Supplying and fising in position Alu. Anodised

Handrails matt natural finish "C" type section of

size 70x30x3mm thick @ 1.52 kg/m, with

aluminium strips section No.5126 of 37mm with

0.227 kg/m including balastrades square section of

size 25.4 x 25.4 mmx1.50mm thick of 0.412kg/m to

a height of 800mm from the finished floor level at

step no sings f ixed at 150mm intervals in two

numbers for each steps with necessary screws,

plugs etc., including providing holes in the RCC

masonry step/landing or floor and also fixing the

aluminium square tubes with 20x20mm MS square

rod f ixed in the step 400mm depth and grouted

with cement and redoing the damaged position to

the original condition. The cost includes cost of all

materials, labour charges,dismantling chargeswherever necessary redoing works, dri ll ing for

fabrication incluing power supply and including

conveyance of all materials to the si te of work

etc.,complete and as directed by the departmental

officers All the AL. sections should be anodised to

15microns as per ISI specification 1868/1962

148.00 Rm - -

106 Plain Cement Concrete 1:8:16 (one cement eight

fine aggregates and sixteen coarse aggregates)

using 20mm size ISS HBG metal including cost

and conveyance of all materials to site and

including for the mixing, laying water carrying with

al l leads of good water compacting and labour

charges and all incidential charges such as water providing etc., complete as per standard

specification

4.00 Cum - -

107Supply and Roofing with best quality AC Sheets

(Corrugated) 6mm thick grey colour including cost

of J bolt ,bitumen washers & cutting the sheets to

required sizes if found necessary during execution

extra complete as per standard specification.

84.00 Sqm - -






Eastimated


Item

No.Description Unit


108 Paving the floor with design Antiskid ceramic tiles

(colour and shade as directed) of size 305 mm x

305mm x 6 mm in all f loors over a base layer of

cement mortar 1:3 (one cement and three sand )

20mm thick laid in-situ and pointed with samecoloured cement etc, complete as per standard

specification.

830.00 Sqm - -

109 Supplying and fixing in position Cement based

hydrual i-cally pressed Anti-Skid tiles (pattern

design) 20 mmthick in cement mortar 1:3 - 20 mm

thick & pointed with same colour of cement etc.,


76.00 Sqm - -

110 Dadooing walls with Glazed tiles of sizes 305mm

X200mm X 6mm size of approved make and

quality and colour l Set in cement mortar 1:2 (one

cement ,two sand) over 10 mm base layer

plastering and pointing with white cement neatly as

directed etc., complete.as per standard

specification

480.00 Sqm - -

111 Paving the floor with design Antiskirt ceramic tiles

(colour and shade as directed) of size 200 mm x

200mm x 6 mm in all f loors over a base layer of

cement mortar 1:3 (one cement and three sand )

20mm thick laid in-situ and pointed with same

coloured cement etc., complete.as per standard

specification

112.00 Sqm - -

112 Providing & fixing PVC RAIN WATER

DOWNFALL PIPE of 110mm dia with necessary

T.W.Clamps Plugs, Shoes,Bemds, other clamps,

screws nails etc.,complete complying with

standard specification. The rate is inclusive of cost

of removable iron gratings of appropriate size. The

size of Teak Wood plugs used is 150X25mm in

front & 200x75mm in rear (wall side) with a depth

of 110mm. The pipeis to befixedby means of "U"

clamps at the centre of pipes to be fixed.110mm

dia PVC Pipe [4 Kg/SqCm]

108.00 Rm - -






Eastimated


Item

No.Description Unit


113 Supplying and f ixing in position best quality

approved make white glazed earthenware wash

hand basin of size 550 X 400 mm with a pair of

cast iron brackets, including cost of 15mm

diametre brass chromium plated piller tape,32 mmdiametre C.P. Waste union, 32 mm diametre

P.V.C. waste pipe with rubber plug and chain,

15mm diametre G.M.wheel valve, 15mm dia brass

nipple, 15mm dia nylon connections etc., including

fixing the wash hand basin in the wall in position

with a pair of C.I. brackets with teak wood plugs

and screws and giving necessary water supply

connection and paintiung the brackets with two

coats of paint over a primimg coat of anticorrosive

paint including testing for leackage etc., complete

complying with standard specifications

32.00 No - -

114 Supplying and fixing in position Indian water closet

of size 580 X 440mm, white glazed earthen ware

of approved quality with 'P' trap or 'S' trap

confirming to IS:2556 - Part XII with sand cushion

and forming f loor ing al round the closet using

40mm broken brick jel ly in l ime concrete 1:2:5 (

one part of lime, two parts of sand and five parts of

brick jel ly) 100mm thick and finishing the top to

required slope and including giving necessary

connection to cast iron soi l pipes/ PVC pipes by

dismandling brick masonry, reinforced cement

concrete roof/f loor s lab and making good the

disturbed portion to original condition without

leakage etc., complete complying with standard

specifications and as directed by the departmental

officers. (The water closet should be got approved

by the Executive Engineer before use on works.)

16 No - -






Eastimated


Item

No.Description Unit


115 Supplying laying and jointing the glazed S W pipes

of 100mm size of approved quality with spigot and

socket ends in dry condition with spun yarn and

cement joints required depth for tranches including

petty masonry,shoring and strutting wherever found necessary, and laying the pipel ine in the

alignment at the specified gradient and testing with

necessary tools and plant etc. and level ling the

ground complete complying with standard

specifications.

60 Rm - -

116

Supplying laying and jointing P.V.C pipes

(6Kg/SqCm) of approved quality and best variety

conforming to I.S.S & with I.S.I mark, of the

fol lowing sizes including cutting , Fixing to PVC

specials using Adhesive but excluding cost of such

specials and fixing to wall with necessary teak -

Wood Plugs,PVC Clamps and screws,making

holes on the wall or drilling holes in roof and

making good the dismantled portions to original

condition with necessary brick work and plastering

wherever necessary with necessary scaffolding

charges.

- -

116.1 25MM dia,PVC pipe 200.00 Rm - -

116.2 20mm dia.PVC pipe 200.00 Rm - -

117 Supplying and f ixing in posit ion indian make

bewelled edge mirror of approved quality and

brand of size 600 X 450mm wth necessary plastic

back, PVC frame with bottom stand of approved

colour with brass screws,rawal plugs etc.,complete complying with standard specifications.

32 Nos - -

118 Supplying and fixing best approved quality Brass

C.P anodised Towel rail 600mm. long and 20mm

Diameter with brackets of same material including

cost of Teak-Wood plugs and C.P.Screws etc.,

complete complying with standard specifications

32 Nos - -

119 Supplying and f ixing best approved quality

C.P.Soap Tray of size 150mm X 100mm including

cost of Teak Woodplugs, brass screws complete

complying with standard specificat ions.

32 Nos - -






Eastimated


Item

No.Description Unit


120 Supply and fixing of PVC. Nahini / Floor Trap with

stainless Steel Gratings - 100 mm x 75 mm

including all charges etc, complete as per standard

specification.

48 Nos - -

121 Supplying laying and jointing G.I. Pipes of approved quality and best varity of B Class pipe of

the following sizes including fixing G.I specials but

excluding cost of such specials cutting threading

of pipes and f ixing to wall with necessary teak

wood plugs, clamps and screws masking holes on

the wall or dri ll ing holes in roof and making good

the dismandled portions to original conditions with

necessary brick work and concrete and plastering

where ever necessary with necessary scafolding

charges. The pipes are to be painted wi th two

coats of good variety and best approved quality of

synthetic enamel paint over a priming coat of red-

oxide primer etc., complete.

- -

121.1 15MM dia,G.I pipe 60.00 Rm - -

121.2 20MM dia,G.I pipe 60.00 Rm - -

121.3 25MM dia,G.I pipe 60.00 Rm - -

124 Supplying and fixing in position first quali ty and

approved variety of Gun Metal Gate Valve (Heavy

type ) with I.S.I.mark of the following sizes

including cost of Shellac , thread etc,.including

labour for cutting and threading of G.I .Pipes

etc.,complete complying with standard

specifications for both internal and external water Supply arrangements.

124.1 20mm dia G.M.Gate Valve 16.00 Nos - -

124.2 25mm dia G.M.Gate Valve 16.00 Nos - -






Eastimated


Item

No.Description Unit


125 Suppling and fixing in position 15mm.diameter

brass screw down tap (heavy duty) of approved

make conforming to I.S.specifications and quality

including cost of shellac , thread etc.complying

with standard specifications and including cutting

and threading wherever necessary.

32.00 Nos - -

126Supply and fixing of following Plumbing

G.I.materials - -

126.1 15mm dia G.I coupling 20 Nos - -

126.2 15mm dia G.I Tee 20 Nos - -

126.3 15mm dia G.I Elbow 20 Nos - -

126.4 15mm dia G.I Bend 20 Nos - -

126.5 15mm dia G.I union 8 Nos - -


126.7 20mm dia G.I Tee 20 Nos - -





126.12 25mm dia G.I Tee 20 Nos - -




126.16 20mm X 15mm dia G.I Reducer 20 Nos - -






Eastimated


Item

No.Description Unit


126.17 20mm X 15mm dia G.I Reducer Elbow 20 Nos - -

126.18 25mm X 20mm dia G.I Reducer 20 Nos

126.19 20mm X 15mm dia G.I Reducer Tee 20 Nos - -

127 Supplying and fixing in position P.V.C. specials

such as plain bend, door bend, plain tee, door tee,

offsets,Y-junction, plain or with door of various

sizes best quality confirming to I.S.S and providing

leakproof joints including fixing to wall and giving

connection to the P.V.C, soil stacks, dismadling

the brick masonry or R.C.C. floor or Roof slaband

redoing the dismandled portion to original condition

etc., complete complying with standard

specifications.

- -

127.1 110mm dia PVC bend 8 Nos - -

127.2 110mm dia PVC Tee 8 Nos - -

127.3 110mm dia PVC Door bend 8 Nos - -

127.4 110mm dia PVC Door Tee 8 Nos

127.5 110mm dia PVC Door Yee 8 Nos - -

127.6 90mm dia PVC bend 8 Nos - -

127.7 90mm dia PVC Tee 8 Nos - -

127.8 90mm dia PVC Door bend 8 Nos - -

127.9 90mm dia PVC Door Tee 8 Nos - -

127.10 90mm dia PVC Door Yee 8 Nos

128 Supplying and fixing in position C.I.Manhole covers

( light or heavy duty) mof var ious sizes of best

approved quality and as per atandard

specificationsetc.,complete.

8 Nos - -






Eastimated


Item

No.Description Unit


129 Supplying and fixing in position best quality P.V.C

soil/ waste pipes (6KSC) of various sizes having

ISI mark and providing leakproof joints including

fixing to the wall with P.V.C/ M.S clamps etc., and

making connection to all sanitary fittings,dismandling masonry/R.C.C. works wherever

necessary and making good the dismandled

portion to the original condition, complying with

standard specifications.

- -

129.1 110mm dia PVC 6KSC Pipe 90.00 Rm - -

129.2 90mm dia PVC 6KSC Pipe 90.00 Rm - -

130

Supplying and fixing P.V.C. venti lating shaft of

100mm dia and 3m height of best approvedquality

and as per standard specifications.

12.00 Rm - -

131 Wiring with 2 x 1.5 sqmm (22 /0.3 ) PVC insulated

single core unsheathed copper conductor cable of 1100V grade in suitable PVC rigid pipe concealed

in wall and cei ling with PVC accessories inflush

with wall with 3mm thick hylum sheet cover with

TW switch box and 5A F.T. switch with continuous

earth wire connection of 14 SWG TC wire for

making good of the concealed portion with suitable

colour for PVC concealed l ight point / Fan point

(For Electronic regulator). SD 22

190.00 No - -

132 Wiring with 2 x 1.5 sqmm (22 /0.3 ) PVC insulated

single core unsheathed copper conductor cable of

1100V grade in suitable PVC rigid pipe concealed


with wall with 150 x 100 x 113 mm TW switch box

with 3mm hylum sheet cover for 5A 3 pin non inter

locking CS plug with continuous earth wire

connection of 14 SWG TC wire and making good

of the concealed portion with suitable colour for

concealed PVC plug point. SD 36

116.00 No - -


S S C OQ





Eastimated


Item

No.Description Unit


133 Supply and run of 2 of 1.5 sqmm (22/0.3) PVC

insulated SC unsheathed Cu.Conductor of 1100V

grade in suitable PVC rigid pipe concealed in wall

and ceiling with continuous earth wire connection

of 14 SWG TC wire and making good of the

concealed portion with suitable colour. SD 53

240.00 Rm - -

134 Supplying and fixing of 1200mm ( 48'' ) sweep AC

ceiling fan complete with regulator with 1M down

rod including S & F of fan clamp with side plates

and cross arm SD 103

70.00 Nos - -

135 Supply and f ixing of s ingle box type 4'40 W flu

fitting complete with copper choke and condensor

with TW round blocks on wall or ceiling with f lu

tube with PVC unsheathed Copper leads from

terminals to the fitting SD 83

180.00 Nos - -

136 Earthing as per P.W.D. standard wi th an earth

electrode of 2Mtr. Class 'B' GI pipe of dia not less

than 32mm complete with necessary masonry

work.SD 228

16.00 Nos - -

137 Supplyand fixingof 3 phase 4 wire 4 wayICDB of

32 A per way with 100 A TPN MC switch with

suitable trunking box Ms cable entry boxes and

internal connection on suitable angle iron frame

work with earth connection SD. 172

4.00 Nos - -

138 Supply and fixing of Horizontal type 4 way triple

pole neutral MCB distribution board in sheet steel

enclosure with 40 A 4 pole MCB isolater as

incoming and 12 Nos. 6A to 32 A SP MCB as

outgoing in flush with wall and making good of the

concealed portion with earth connection. The

MCBDB and MCB's should be with the ISI mark

(lik standard make) SD. 173

16.00 Nos - -

139 Supply and run of 2 of No.8 SWG GI wire for

guarding with cradle with No.8 SWG GI wire at the

equal interval of 1.5m SD.73

60.00 Rm - -


I t W t S l S h t Th th k di C ti BOQ P k I





Eastimated


Item

No.Description Unit


140 Supply and run of 4 X 6 sq.mm (84/0.3) 7/20sqmm

PVC unshealed copper cable in suitable PVC rigid

pipe concealed on wall and ceiling withcontinuos

earth wi re connection of 14 SWG TC wire with

painting of suitable colour SD 66

60.00 Rm - -

141 Supply and fixing of 300mm (12") sweep AC

exhaust fan complete with necessary wall opening

and making good of the wall. SD 110

32.00 Nos - -

142 Wir ing wi th 2 x 4sqmm (56 /0.3 ) PVC insulated

single core unsheathed copper conductor cable of

1100V grade in suitable PVC rigid pipe concealed


with wall with 150 x 100 x 113 mm TW switch box

with 3mm hylum sheet cover for 15A 3 pin non

inter locking CS plug with continuous earth wire

connection of 14 SWG TC wire and making good

of the concealed portion with suitable colour for

concealed PVC power plug point.SD 38

16.00 Nos - -

143 Supply and fixing of AC / DC 76mm Buzzer / cal l

bel l suitable for 230 volts 50 c/s single phase AC

supply on suitable TW Board with push switch SD

101

16.00 Nos - -

144 R.C.C.Jol ly by a new of fol lowing size in R.C.C.

1:1.5:3 using 20mm gauge hard broken granite

stone jelly and river sand excluding cost of

reinforcement but includingcharges,fabrication

charges curing neat finishing and labour charges

for fixing the jolly in position with standard

spefication

36.00 Sqm - -

145Supply and fixing of 2000 lit capacity PVC tank of

ISI make with all accssessories and the cost shall

inclusive of conveyance charges, fixing charges

etc complete as per standard specification.

16.00 Nos - -


Improvements Water Supply Scheme to Thoothukudi Corporation BOQ Package I





Eastimated


Item

No.Description Unit


146 Earth work excavation for foundation in Hard stiff















104.00 Sqm - -

147

Plain Cement concrete 1:4:8 (one cement, four

sand,eight aggregate) using 40mm gauge hand



not more than 15cm thick and compacted,etc.,


21.00 Cum - -

148R.R. masonry in CM 1:5 mix for foundat ion and

basement as per specification93.00 Cum - -

149 Brick work in CM 1:5 (one cement & f ive sand)

using II class ground moulded bricks of size

9"X43/8"

X 23/4"

standard specification including

finishing, curing,etc., complete complying with


6.00 Cum - -

150 Brick Partition walls in CM 1:3(one cement & threesand) using II nd class ground moulded bricks of

size 9"X43/8"

X23/4"

using hoop iron reinforcement 2

Nos of 6mm dia M.S.rod at every three alternate

layers and the cost shall inclusive of iron

reinforcement, Brick work etc, complete as per


28.00 Cum - -

151 Plastering with cement mortar 1:5 (One cement

and five sand) 12mm thick in all f loors including

cost and conveyance of all materials to site

etc,complete as per standard specifications

774.00 Sqm - -







Eastimated


Item

No.Description Unit


152 White washing two coats with freshly burnt shell

l ime white in all f loors including cost of l ime and

other materials brushes scaffolding charges etc,


774.00 Sqm - -

153 Providing and applying Colour washing one coat of

approved Colour over a coat of white washing

using best shell lime including materials, Labour

charges etc,. Complete as per standard

specification.

774.00 Sqm - -

154 Providing and laying of 63mm thick high strength

type of interlocking pavement block in M20 grade

size 23 x 13 x 6.3cm greycolour and red or green

colour of required sizes with minimum

compressive strength of 20 N/mm2 in uniform

shape of approved make to be laid in lorrying bone

pattern with approved non sticking surface in the

top and the rate including leveling the base,preparation of sub base with sand cushion 100mm

thick, laying out the pavement, cut the pieces to fit

the edge, vibrating the pavers, sweeping the sand

grouting, providing transporting, loading unloading

and laying of paver block as per standard

specification

1125.00 Sqm - -

F Providing Raw Water Pumping Main from

Intake Pump house to Water Treatment Plant at

Ridge Point

- -

155 Earth work in pipe line excavation and depositing

onbank with aninitial lead of 10m and lift of 0mto

2m and 2m to 4m earth work excavation including

equipment and labour charge etc,.complete as per


- -

1118x10 MS Pipe - -

155.1 Sand, silt or other loose soil and ordinary soil. 37107.00 Cum - -

155.2Soft disintegrated rock (SDR) rock not requiring

blasting.18554.00 cum - -

155.2Medium rock and densemedium rock not requiring

blasting.6185.00 cum - -







Eastimated


Item

No.Description Unit


156 Providing sand Bedding for the pipeline trenches

for 200 mm thick including watering and

consolidating by punners etc., complete

1667.25 Cum - -

157 Lowering of MS Pipes & specials into the

trenches and laying to proper grade and alignmentand testing to the required pressure including the

cost of conveyance of water for f illing during

testing.

- -

157.1 1118x10 MS Pipe 10850.00 M - -

158

Refil ling with excavated soi l (other than sand)

complied with standard specification for filling in

trenches

- -

158.1 1118x10 MS Pipe 61846.30 Cum - -

159Jointing of MS pipes with welding and as directed

by site officers. - -

159.1 1118x10 MS Pipe 1086.00 Nos - -

160Joint ing of MS Specials with welding and as

directed by site officers. - -

160.1 1118x10 MS Pipe 109.00 Nos - -

161 Constructing masonry chamber of inside

dimensions as mentioned below with Country

Brick, brick work in CM 1:5 (1 cement : 5 coarse

sand) for Butterfly valve Pit, with CI Surface box

100mm top diameter, 160mm bottom diameter and

180mm deep (inside) with chained lid and topRCC

Precast slab 1:2:4 (1 cement : 2 coarse sand : 4

graded stone aggregate of 20mm nominal size)with necessary earth work excavation including

ref illing the sides of foundation, foundation

concrete 1:5:10 (1 cement : 5 coarse sand : 10

grade stone aggregate 40mm nominal size) and

inside plastering with CM 1:5 (1 cement : 5 coarse

sand) 12 mm thick finished with a floating coat of

neat cement, complete as per standard design and

shown in the drawings.

161.1 2000 x 1800 x 2500mm clear inside dimensions 3 Nos - -







Eastimated


Item

No.Description Unit





sand) for Air valve Pi t, with CI Surface box

100mm top diameter, 160mm bottom diameter and180mm deep (inside) with chained lid and topRCC


graded stone aggregate of 20mm nominal size)

with necessary earth work excavation including



grade stone aggregate 40mm nominal size) and

inside plastering with CM 1:5 (1 cement : 5 coarse




- -





sand) for Scour valve Pit, with CI Surface box

100mm top diameter, 160mm bottom diameter and

180mm deep (inside) with chained lid and topRCC


graded stone aggregate of 20mm nominal size)

with necessary earth work excavation including



grade stone aggregate 40mm nominal size) andinside plastering with CM 1:5 (1 cement : 5 coarse





164Supply , delivery & fixingof following CI valves and

specials as per relevant IS with IS marking - -

164.1 SLUICE VALVE - -





p pp y p Q g


Eastimated


Item

No.Description Unit


164.1.1 2000 x 1800 x 2500mm clear inside dimensions 3.00 Nos - -

164.2 SCOUR VALVES - -


164.3 DOUBLE AIR VALVE - -


165 Provision for supply and del ivery of MS Pipes,

Specials such as tees, bends etc.with inside lining/

epoxy coating and outside coating with CM 25mm

thick

17613.00 Kg - -

166 Manufacturing, Testing, supplying and delivery of

MS spiral welded pipe(welded with sleeve joint)

including cost of welding joint materials, 12mm

thick inside and 20mm thick outside l ining withcement mortar conforming to relevent BIS for

below ground level pipes and external epoxy

coating to the above ground level pipes wherever

necessary and test pressure conforming to IS

5504/1997 addendum and other technical

specification of alignment of pumping main us

directed by the department officers.

166.1

1100mm inner dia. MS Pipe (11mm thick to suit

the pressure of 14KSC to 24KSC) as per IS

3589/2001

10850.00 M - -

167 Supply, delivery, fixing, testing and commissioning

of best efficiant orifice type Electronic water meter

incuding all accessories and labour charges etc.

complete.

- -

167.1 1118mm MS Pumping main 2.00 Nos - -

168 Provision for road restoration cutting & restoration. - -

168.1 B.T. Road Cutting charges 65.00 Cum - -





p pp y p g


Eastimated


Item

No.Description Unit


169 Restoration of cement concrete road and black top

surface providing with 10cm thick sand, over sand

with cement concrete M10 mix and top with

cement concrete M15 mix using 20mm ISS

Standard of metal size with 10cm thick downward

rammered well to have compacted concrete

thickness etc., complete.

169.1 1:4:8 mix 21.60 Cum - -

169.2 1:2:4 mix 21.60 Cum - -

170 Provision for Odai crossing with RCC Pipe caring

bridge including Materials, labour charges etc,.

Complete as per standard drawings (Bill of

Quantities -3 Nos)

- -

170.1 Earthwork excavation for foundation and



soil including shoring, strutting, bailing out water

wherever necessary and all other inc idental

charges

170.1.1 In hard stiff clay, stiff block cotton, gravel, stoney


s ize boulders and hard gravel ly soil . 0-2m depth 71.00 Cum

- -

170.1.2 Soft disintegrated rock, laterite, soft rock or kunkar

not requiring blasting 0-2m depth 36.00 Cum - -

170.1.3 DMR not requiring blasting 0-2m depth 12.00 Cum - -

170.1.4HR requiring by chipping & Chiseling 2-3m depth 26.50 Cum - -

170.2 PCC 1:4:8, using 40mm size HBG stone for



with the standard specification and as directed by

the Engineers - 4.5m upto 9m depth below G.L 9.00 Cum

- -

170.3 RCC 1:1.5:3 mix using 20mm HBG stone for the

following works excluding centering, strutting and

cost of reinforcement, grills in position including

mixing, laying, curing and etc.complete

- -






Eastimated


Item

No.Description Unit


170.3.1 Beyond 4.50m depth and upto 9m depth below

road level20.00 Cum - -

170.3.2 Beyond 1.50m depth and upto 4.5 depth below

road level6.00 Cum - -

170.3.3 Upto 1.5 depth below road level 4.00 Cum - -

170.3.4 For works upto 4.50mht.above road level 34.00 Cum - -

170.4 Centering for sides and soffits for RCC members





angles.

- -

Circular Column - -

170.4.1Circular Column below G.L

&upto 3.3m78.00 Sqm - -

170.4.2 Above GL 3.30m - 4.3m 24.00 Sqm - -

170.4.3 Above GL 4.30m - 5.3m 24.00 Sqm - -

Plane Surface - -

170.4.4 UPTO 3.30m Ht.Above and Below GL 41.00 Sqm - -

170.4.5 From 4.30m ht. To 5.30m ht. Above GL 153.00 Sqm - -

170.5 Supplying, fabricating and placing in position of

steel rods for all RCC works including cost of steel

and binding wire in all heights etc. completecomplying with standard specification and as

directed by the Engineers. 6.50 MT

- -

170.6 Refilling the foundation with excavated soil 116.00 Cum - -

170.7 Supply delivery and fixing of M.S Clamps with bolts

and nuts etc.21 Nos - -

170.8 Construction of pipe carrying bridge near Kaliyaur

village of 1118mm MS Pumping main at LS 4055 &

LS 5147 -Length apprx.10M ( Bill of Quant ity-

2Nos)

2 No - -





Eastimated


Item

No.Description Unit


175 RCC M30 concrete mix using 20mm HBG stone

for the fol lowing works excluding center ing,

strutting and cost of reinforcement, grills in position

including mixing, laying, curing andfinishing, fixing

fan clamps in RCC works wherever necessary

complying wi th standard srecif icat ion and as

directected by the Site Engineers.

- -

175.1 1.50m below G.L 44.50 Cum - -

175.2 1.50m above G.L 5.00 Cum - -

175.3 1.50m upto 4.5m above G.L 57.00 Cum - -




supports etc. complete using M.S. sheets of size90mm x60mm and BG 10 gauge stiffened with MS









- -

176.1 Upto 3.3m below G.L 30.00 Sqm - -

176.2 Upto 3.3m above G.L 290.00 Sqm - -

176.3 3.3m to 4.3m 381.00 Sqm - -

177 Supplying, fabricating and placing in position of


and binding wire in all heights etc. complete


directed by the Site Engineers.

16.00 MT - -






Eastimated


Item

No.Description Unit


178 Providing Fusion Bonded Epoxy coating not less










all taxes)

- -

178.1 For 8mm to 16mm 11.20 MT - -

178.2 For 20mm to 32mm 4.80 MT - -














anchor bolts.

2 No - -




labour charges etc., complete as per specification.

in size 4m dia.(Top of Flash Mixer)

422.77 Kg - -

181Supplying, erection of the ISMB 150mm X 75mm

including fixing charges etc., complete111.00 RM - -






Eastimated


Item

No.Description Unit


182 Fabrication,Supply, delivery and fixing of Topside

M.S.Handrail for safety purpose, Providing

750mm height with suitable side supports, clamps

and locking of arrangements provided with two

coats of approved enamel paint over one coat of redoxide paint, for providing suitable l incl ined

length, including bottom anchorage etc., complete

as per standared specifications.

625.00 Kg - -

183Supplying, fixing of PVC coated Rungs including

fixing charges etc., complete17.00 Nos - -

2) CLARIFLOCCULATOR - -

184

Earthwork excavation for foundation and



soil including shoring, strutting,bailing out water

wherever necessary and all other inc identalcharges etc. complete as per Standard

specification

- -

184.1Soft disintegrated rock, laterite, soft rock or kunkar

not requiring blasting4640.00 Cum - -


stacking - for 2m to 6m - -

184.3 2 to 3m depth 4720.00 Cum - -

185

PCC 1:3:6, using 40mm size HBG stone for




- -

185.1 1.50m below G.L 488.00 Cum - -








- -

186.1 1.50m below G.L 1100.00 Cum - -






Eastimated


Item

No.Description Unit


186.2 1.50m above G.L 201.35 Cum - -

186.3 1.50m upto 4.5m above G.L 251.00 Cum - -

187 Centering for sides and soffits for RCC members(plane surface) for the following works including












- -

187.1 Upto 3.3m below G.L 760.00 Cum - -

187.2 Upto 3.3m above G.L 3754.00 Cum - -






202.00 MT - -



to reinforcement of all diameters as per IS13620/1993 including testing of coating at







all taxes)

- -

189.1 For 8mm to 16mm 141.40 MT - -






Eastimated


Item

No.Description Unit


189.2 For 20mm to 32mm 60.60 MT - -

190

Fabrication, supply, delivery and fixing of outside


50mmx50mmx6mm M.S angle for sides and stepsin 16mm MS plain rods fixed at 30cm c/c welded










anchor bolts.

4.00 Nos - -




labour charges etc., complete as per specification.

in size 7m dia.(Top of Sludge Thickener)

870.41 Kg - -

192Supplying, erection of the ISMB 150mm X 75mm

including fixing charges etc., complete210.00 Kg - -





coats of approved enamel paint over one coat of

redoxide paint, for providing suitable l incl ined



- -

193.1 Flocculator with clarifier Raft slab 10424.80 Kg - -

193.2 Sludge pit 2198.00 Kg - -



3) RAPID SAND FILTER - -






Eastimated


Item

No.Description Unit








specification

- -

195.1Medium rock and Dense medium rock not

requiring blasting.242.00 Cum - -


stacking - for 2m to 6m279.00 Cum - -

196 Supplying and filling the basement with approved

good quali ty sand in layers not more than 15 cm

thick well rammed, watered and consolidated etc.

complete.

304.00 Cum - -



curing and finishing etc. complete in accordancewith the standard specification.

228.00 Cum - -

198RCC M30 concrete mix using 20mm HBG stone







- -

198.1 1.50m below G.L 425.00 Cum - -

198.2 1.50m to 4.5m below G.L 144.00 Cum - -

198.3 1.50m above G.L 962.00 Cum - -

198.4 Upto 1.50m to 4.50m 1353.05 Cum - -

198.5 Upto 4.50m to 9.00m 836.00 Cum - -






Eastimated


Item

No.Description Unit















- -



199.3 Upto 3.30m to 4.30m 4919.00 Cum - -

199.4 Above 4.30m 4345.00 Cum - -






347.00 MT - -










all taxes)

- -

201.1 For 8mm to 16mm 242.90 MT - -





Eastimated


Item

No.Description Unit


209

Fabrication, supply, delivery and fixing of outside




jointed etc., providing with suitable side supports,clamps and locking arrangements provided with








anchor bolts.

3.00 Nos - -

210

Supply, delivery and fabrication of MS doors and










- -

210.1Fully panelled Double leaf -Door in Size of 1.00 X

2.50M27.60 Sqm - -

210.2Fully panelled Double leaf - Widow in Size of 1.20

X 0.90M276.00 Sqm - -

210.3 Ventilator in Size of 0.45 X 0.60M 55.20 Sqm - -




labour charges etc., complete as per specification.(

in size 45.00M X 3.00M)

5940.00 Kg - -

212 Supplying, fixing of PVC insulated Rungs. 8.00 Nos - -






Eastimated


Item

No.Description Unit


213

White washing two coats for walls inside and




3700.00 Sqm - -

214

Painting two coats with approved cement paint




Engineer.

2424.00 Sqm - -

215 Providing and applying two coats of approved



1276.50 Sqm - -

216

Supplying and f ixing in posit ion of 110 mm OD



Enginner.

394.00 - -









18399.00 Kg - -

218 Supply, filling of 20mm good quality aggregate for

filling in filter bed including labour, etc. complete as

per standared specifications.

54.00 Cum - -

219 Supply, f il ling of good quality of r iver sand for

filling in filter bed including labour, etc. complete as

per standared specifications.

94.50 Cum - -

4) CHLORINATION ROOM - -







specification

- -








Eastimated


Item

No.Description Unit







complete.

6.00 Cum - -





14.00 Cum - -








- -



224.3 1.50m to 4.50m 24.00 Cum - -







country wood joists of size 10cm x63mm spaced atabout 90cm c/c and supported by casurina props






- -

225.1 Up to 3.30m below G.L 94.08 Sqm - -

225.2 Up to 3.30m above G.L 256.00 Sqm - -






Eastimated


Item

No.Description Unit







5.00 MT - -











all taxes)

- -

227.1 For 8mm to 16mm 5.00 MT - -

228 Brick work in CM 1:5 mix using country bricks of

size 22cm x 11cm x 7cm for the fol lowing works

including curing etc., complete complying with

standard specification and as directed by the Site

Engineers.

- -

228.1 Up to 4.50m ht.(from plinth level) 13.00 Cum - -

229

Plastering with CM 1:5 ,12mm thick for outside

walls complying with standard specification and as


102.00 Sqm - -

230

Plastering with CM 1:5 mix 20mm thick for walls



56.70 Sqm - -

231Providing granolithic flooring 40mm thick in C.C

1:2:4 mix using 10mm/12mm HBG.56.00 Sqm - -






thickness etc.,

57.00 Sqm - -





Eastimated


Item

No.Description Unit


239 2 Tone Capacity hand operated over head

travelling (H O T) crane suitable for span upto

10.00 Mtrs span and travel length 23 Mtrs with

c lear l if t up to 4 Mtrs. Inc luding gear type chain

pul ley block and geared travelling trolley etc.

complete with all accessories.

1.00 No - -




Enginner.

34.00 RM - -

5) WASH WATER TANK - -

241 Earth work excavation for foundation in Hard sti ff















- -

241.1 Footings - First Depth 107.12 Cum - -

241.2 Plinth Beam 30.00 Cum - -

242 Earth work excavation for foundation in Hard sti ff






full depth with int ial lead and lif ts and cleaning

and levelling the site etc.,complete

23.00 Cum - -






Eastimated


Item

No.Description Unit


243 Sand fil ling in foundation with clean river sand in

layer of 15cm thick well watered rammed to

consolidation including cost and conveyance of

sand to site incluidng labour charges etc.,

completete as per standard specificataion

5.00 Cum - -

244 Plain Cement Concrete 1:4:8 (onecement four fineaggregates and eight coarse aggregates) using

40mm size ISS HBG metal inc luding cost and

conveyance of all materials to site and including for

the mixing,and labour charges etc., complete as

per standard specification

11.50 Cum - -

245 Providing centering, strutting arrangements for the

sides and soffits for RCC slab, intel bed block "T"

and "L beams stair case waist slab , landing slab

and cost and conveyance of all materials at site

and all labour charges and other incidental

charges for 3m height and removing the same

af ter the specification period as directed by

departmental officer etc., complete as per standardspecification

- -

245.1 Plain Surfaces Below GL 157.00 Sqm - -

245.2 Plain Surfaces 3.00m to 4.30m 112.00 Sqm - -

245.3 Plain Surfaces at 7.30m to 8.30m 112.00 Sqm - -








Eastimated


Item

No.Description Unit


245.6 Square Column upto 3.30m 108.00 Sqm - -

245.7 Square Column 3.30m to 4.30m 23.00 Sqm - -












245.19 Curved Surface 16.30m to 17.30m 149.00 Sqm - -

245.20 Curved Surfaces 17.30m to 18.30 83.00 Sqm - -



245.23 Circular Column upto 3.30m 23.00 Sqm - -

245.24 Circular Column 3.30m to 4.30m 1.50 Sqm - -








Eastimated


Item

No.Description Unit










246 Reinforced cement concrete M25grade 1:1½:3

(one cement, one and half sand and three bluecourse aggregate of 20mm size hard broken

stone) for the following items. The rates excluding

the cost of stone for the following items. The rates

excluding the cost of supplying, fabricating and

placing in opposition of MS / RTS Grills for

reinforcement and centering, strutting & shuttering,

but including cost of mixing, placing the concrete in

position, vibrating, consolidating, finishing and

curing the concrete etc., complete and as directed

by the Engineer-in-charge. (The rates inclusive of

testing the reservoir for the water tightness of the

structure)

- -

246.1 For 1.5m Below G.L 24.00 Cum - -

246.2 For 4.5m Above G.L 22.00 Cum - -

246.3 For 4.51m to 7.32m Above G.L 19.00 Cum - -

246.4 For 7.32m to 10.98m Above G.L 20.00 Cum - -

246.5 For 10.98m to 14.64m from G.L 8.00 Cum - -





Eastimated


Item

No.Description Unit


251.1 For 8mm to 16mm 14.70 MT - -

251.2 For 20mm to 32mm 6.30 MT - -

252 Providing and fixing of RCC inner access ladder in

RCC 1:1.5:3 (One cement, one and half sand,

three aggregates) using 20mm HBG stones for

OHT including grill in position, centering, shuttering

charges, mixing concrete curing etc, to required

height and clear width of 45cm consisting of two

nos of vertical post of 10cm X 15cm and step salb

of 25mm X 25mm etc,complete and as directed by

Municipal Officers.

1.00 No - -

253 Construction of RCC spiral staircase in RCC

1:1.5:3 (1 Cement : 1.5 Sand : 3 Coarse

Aggregate) using 20 mm HBGS of 1.80 m

diameter of required height for approach to the roof

of Service Reservoir with RCC Handrails including

earthwork excavation, providing CC 1:4:8 mix,

RCC footing 1:1.5:3 mix, GL platform etc., and

also including cost of steel reinforcement,

fabr icat ion charges, scaffolding, center ing,

precasting charges, cement, painting etc. complete

as per standard specifications and as directed by

Engineer. The staircase shall be braced to the

column of service reservoir at suitable interval. (in

the BOQ, quantity column the exact height to be

mentioned from GL to roof slab bottom to get total

value of work to be done.

19.40 Rm - -

254 Supply and fixing in position of enamel water levelindicator with all accessories of approved pattern

and design etc., complete as per standard

specifications and as directed by Engineer-in-

charge

1.00 No - -

255 Supplying and fixing of RCC 1:1.5:3 (1 Cement :

1.5 Sand : 3 Coarse Aggregate) using 20 mm

HBGS for RCC Handrails of 0.91 m height over the

top of roof slab of approved pattern and design

including the cost of reinforcement, centering,

precasting, finishing, curing etc., complete as per

standard specif ications and as directed by

Engineer-in-charge

48.00 Rm - -





Eastimated


Item

No.Description Unit





sand) for sluice valve, with CI Surface box 100mm

top diameter, 160mm bottom diameter and 180mm

deep (inside) with chained lid and top RCC Precast

s lab 1:2:4 (1 cement : 2 coarse sand : 4 graded

stone aggregate of 20mm nominal size) with

necessary earth work excavation including refilling

the sides of foundation, foundation concrete 1:5:10

(1 cement : 5 coarse sand : 10 grade stone

aggregate 40mm nominal size) and inside

plastering with CM 1:5 (1 cement : 5 coarse sand)

12mm thick finished with a floating coat of neat

cement, complete as per standard design and

shown in the drawings. 1500x 900x1200mm clear

inside dimensions

3.00 No - -

261 Providing lightening arrestor etc., complete as per standard specif ications and as directed by

Departmental Engineer

1.00 No - -

262 Supply, delivery, fixing testing and commissioning

of best efficient orifice type electronic water meter

using differential pressure sensing element with

flange insertable ori fice plate suitable for d, d/2

tapping as per BS 1042 specification. The meter

should be suitable to be connected to convertor to

give a remote indication of total isation and flow

rate wi th an opt ion for computer connect ivi ty

including sensor and totaliser including all taxes,

duties and handling charges.

1.00 No - -

263 Provision for pipe connection arrangements for

inlet, outlet, scour and overflow etc, including cost

of pipes, specials, valve, labour charges for lifting,

aligning, f ixing of DI pipes etc, complete as

detailed below

2150.00 Kg - -

6) CLEAR WATER SUMP - -






Eastimated


Item

No.Description Unit







charges etc. complete as per Standardspecification

- -









180.00 Cum - -



strutting and cost of reinforcement, grills in positionincluding mixing, laying, curing andfinishing, fixing




- -



266.3 1.50m to 4.50m 362.00 Cum - -






Eastimated


Item

No.Description Unit






90mm x60mm and BG 10 gauge stiffened with MSangles of size 25mm x25mm x3mm laid over








- -

267.1 Upto 3.3m below G.L 83.50 Sqm - -

267.2 Upto 3.3m above G.L 3947.00 Sqm - -






164.50 MT - -











all taxes)

- -

269.1 For 8mm to 16mm 115.15 MT - -

269.2 For 20mm to 32mm 49.35 MT - -






Eastimated


Item

No.Description Unit















anchor bolts.

2.00 Nos - -

271 Providing and laying Painting of C.I. Spun soi l,

vent pipes and fittings with synthetic enamel paint

of any colour as per pipe colour code over a coat

of primer (of approved quali ty) in size of 150mmdia.

- -

271.1 150mm CI Socketed Tee 9600.00 Kg - -



273 Supplying and fixing of heavy duty Manhole cover

with frame in size of 900X900mm(approved

quality), including all materials and labour cherges

etc. complete. As per standard specification.

8.00 Nos - -

274 Supplying and fixing of 1200mm MS pipes

including material and labour charges

etc,.complete.

1245.00 Kg - -

275 Supplying and fixing of 1200mm Butterfly valve

including material and labour charges

etc,.complete.

2.00 Nos - -

7) SLUDGE THICKNER - -






Eastimated


Item

No.Description Unit








- -



276.2 PCC 1:3:6, using 40mm size HBG stone for




33.00 Cum - -








- -



277.3 1.5m to 4.5m 24.00 Cum - -














- -






Eastimated


Item

No.Description Unit









15.00 MT - -









of bent rods etc., completeas per specification andas directed by the Engineer in charge. (inclusive of

all taxes)

- -

280.1 For 8mm to 16mm 10.50 MT - -

280.2 For 20mm to 32mm 4.50 MT - -







two coats of approved enamel paint over one coatof red oxide paint, for providing access to floor top






anchor bolts.

1.00 No - -






Eastimated


Item

No.Description Unit









1609.25 Kg - -



8) SLUDGE HOLDING / BALANCING TANK - -







- -









6.50 Cum - -








- -



286.3 Upto 1.5m to 4.5m 13.00 Cum - -






Eastimated


Item

No.Description Unit














- -

287.1 Upto 3.3m below G.L. 8.00 Sqm - -

287.2 Upto 3.3m above G.L. 960.00 Sqm - -






5.00 MT - -











all taxes)

- -

289.1 For 8mm to 16mm 5.00 MT - -





Engineers.

6.59 Cum - -






Eastimated


Item

No.Description Unit


291 Plastering with CM 1:5 ,12mm thick for outside



48.00 Sqm - -




50.79 Sqm - -






thickness etc.,

15.00 Sqm - -




weight of cement painted with same oiled mortar



15.00 Sqm - -

295 Supply, delivery and fabrication of MS doors andwindows with outer frame and shutter frame in MS









- -


2.50M3.45 Sqm - -

295.2 Fully panelled Double leaf - Widow in Size of 1.20X 0.90M

6.00 Sqm - -







Eastimated


Item

No.Description Unit









281.25 Kg - -

297 Supplying, fixing of PVC coated Rungs including


9) USED WASH WATER TANK - -







- -









28.00 Cum - -








- -

300.1 Upto 1.5m below G.L. 56.00 Cum - -

300.2 Upto 1.5m above G.L. 32.20 Cum - -

300.3 Upto 1.5m to 4.5m 42.00 Cum - -






Eastimated


Item

No.Description Unit














- -

301.1 Upto 3.3m below G.L. 17.00 - -

301.2 Upto 3.3m above G.L. 220.00 - -

302

Supplying, fabricating and placing in position of





16.00 MT - -











all taxes)

- -

303.1 For 8mm to 16mm 11.20 MT - -

303.2 For 20mm to 32mm 4.80 MT - -






Eastimated


Item

No.Description Unit






Engineers.

6.59 Cum - -

305 Plastering with CM 1:5 ,12mm thick for outside



48.00 Cum - -




50.79 Sqm - -






thickness etc.,

2.50 Cum - -







15.00 Sqm - -








coat of red oxide including cost of angles, plates,sheets, fabrication charges, cost of hold fast and


- -


2.50M3.45 Sqm - -


X 0.90M6.00 Sqm - -







Eastimated


Item

No.Description Unit


310

Fabrication,Supply, delivery and fixing of Topside







281.25 kg - -



10) CHEMICAL HOUSE - -

312

Earthwork excavation for foundation and






specification

- -








complete.

98.28 Cum - -



curing and finishing etc. complete in accordancewith the standard specification.

43.03 Cum - -








- -







Eastimated


Item

No.Description Unit


315.2 Upto 1.5m above G.L. 96.00 Cum - -

315.3 Upto 1.5m to 4.5m 34.08 Cum - -














- -

316.1 Upto 3.3m below G.L. 916.50 Sqm - -

316.2 Upto 3.3m above G.L. 365.00 Sqm - -






20.00 MT - -










all taxes)

- -

319.1 For 8mm to 16mm 14.00 MT - -






Eastimated


Item

No.Description Unit


319.2 For 20mm to 32mm 6.00 MT - -




standard specification and as directed by the SiteEngineers.

- -


320.2 Upto 4.50m ht.(from plinth level) 120.00 Cum - -

321Damp proof course in CM 1:3 mix, 20 mm thick

using 5% crude oil over basement.14.50 Sqm - -

322

Plastering with CM 1:5 ,12mm thick for outside



725.50 Sqm - -

323

Plastering with CM 1:5 mix 20mm thick for walls

inside complying with standard specification andas directed by the Engineer.

400.80 Sqm - -

324Providing granolithic flooring 40mm thick in C.C

1:2:4 mix using 10mm/12mm HBG.437.00 Sqm - -






thickness etc.,

219.00 Sqm - -




weight of cement painted with same oiled mortar complying with standard specification and as


219.00 Sqm - -






Eastimated


Item

No.Description Unit












- -


2.50M17.25 Sqm - -


X 0.90M48.00 Sqm - -


328 Supplying, laying of rubber lining for Alum & Limetank including labour charges etc., complete as per

specification.

62.00 Sqm - -

329 White washing two coats for walls inside and




1125.99 Sqm - -





Engineer.

725.19 Sqm - -

331 Providing and applying two coats of approved



400.80 Sqm - -

332 providing and finishing the RCC stair case from G

floor to First floor Roof slab including hand rai l,

fixing charges, all material, etc. complete as per


10.80 Sqm - -






Eastimated


Item

No.Description Unit










263.00 Kg - -

334 2 Tone Capacity hand operated over head

travelling (H O T) crane suitable for span upto 9.60

Mtrs span and travel length 23 Mtrs with clear l ift

up to 4 Mtrs. Including gear type chain pulley block

and geared travelling trolley etc. complete with all

accessories.

1.00 No - -




Enginner.

68.00 RM - -

11) Providing and Construction of Centrifuge,

Labouratory and Electrical Control Room in

Water Treatment Plant Site.

- -






charges

- -



336.2 Hard granite measured in solid including blasting &stacking - for 2m to 6m

20.00 Cum - -

337

PCC 1:4:8, using 40mm size HBG stone for


curing and finishing etc. complete

10.00 Cum - -

338R.R. masonry in CM 1:5 mix for foundat ion and

basement as per specification60.00 Cum - -

339 Filling the sides of the foundation and basement

with excavated earth (other than sand) in layers

not more than 15 cm thick, well rammed watered

and consolidated complying with standard

specification

46.00 Cum - -





Eastimated


Item

No.Description Unit


349Special ceiling plastering with CM 1:3 mix 10mm

thick complying with standard specification94.00 Sqm - -

350 Flooring with C.C. 1:4:8 mix using 40mm size hard

broken stone including mixing, placing, ramming,

curing etc.,and Floor finishing with ellis pattern

flooring 20 mm thick etc., complete

15.00 Cum - -

351 Weathering course with concrete broken brick jelly

of 20mm size in pure slaked l ime (No sand to be

used) over roof slab the proportion of brick jelly to

lime being 32:12.5 for required depth of 80mm for

giving requi red slope and thickness to roof as

required will beaten with wooden beaters etc. and

Finishing the top of roof (weathering course) with




complying with standard specification

72.00 Sqm - -

352 Supply, delivery and fixing in position of MS steeldoor including all fixtures and appliances

complying with standard specification

6.00 No - -

353 Supply, delivery and fixing in position MS windows

with 10 mm MS bar horizontally at 15 cm C/c and

welded MS shutters and working arrangements

including all fixtures and appliances complying with


12.00 Nos. - -

354 Supply, delivery and fixing in position of MS

Vent ilator `N' type wi th 2 Nos of 16 mm MS bar

horizontally fixed and glazed shutters including all

fixtures and appliances complying with standard

specification

6.00 Nos. - -

355 White washing two coats for walls inside with fine

screened shel l l ime complying with standard

specification

150.00 Sqm - -




curing etc., complete

345.00 Sqm - -

357 Painting two coats with approved paint over one

coat of priming coat for new iron work complying

with standard specification

62.00 Sqm - -






Eastimated


Item

No.Description Unit


358 Providing Rain Water pipe arrangements in 110

PVC pipe68.00 m - -

12) BARBED WIRE FENCING AROUND WTP - -

359

Earth work excavation for foundation including

depositing an bank with all lead including shoring,strutting, barricading, danger lighting.

- -

359.1

do- In all soi l including soi l mixed with boulders

upto 30 Cms. size and exclusive of disintegrated

rock.

45.26 Cum - -

360 Providing and laying C.C. 1:3:6 proportion for

foundation (Screed layer) with 40 mm and down

size of approved gradation hard broken granite,

trap basalt or with any other approved hard

aggregate including cost and conveyance of all

materials with an all lead & lifts including plywood /

steel form work, machine mixing, laying, tamping,

curing etc., complete.

7.51 Cum - -

361 Providing and laying in position reinforced cementconcrete of mix 1:2:4 with 20mm (M15) and down

size graded granite metal, machine mixed,

concrete laid in layers not exceeding 15 cms thick,

v ibrated for all works in foundat ion plinth and

ground floor level for retaining walls, return walls,

walls (any thickness) including attached plasters,

columns, piers, abutments pillars, posts, struts,

buttresses, str ing or lacing courses, parapets,

coping, bed blocks, anchor blocks, plain window

cil ls, fil lets etc., including cost of all materials,

labour, HOM of machinery, curing, complete as per

specifications.

37.84 Cum - -

362 Providing TMT steel reinforcement for R.C.C work

including straightening, cutting, bending, hooking,

placing in position, lapping and / or welding

wherever required, tying with binding wire and

anchoring to the adjoining members wherever

necessary complete as per design (laps and

wastage shall not be measured and paid) cost of

materials, labour, HOM of machinery complete as

per specifications.

2838.00 Kg - -






Eastimated


Item

No.Description Unit


363 Providing and finishing external pil lers surface in

one coat with water proof cement paint of

approved brand and shade to give an even shade

after throughly brooming the surface to remove all

dirt and loose powdered mateial, free from mortar

drops and other foreign matter cost of materials,

labour, complete as per specifications

379.44 Sqm - -

364 Providing and fixing M.S. gate inclding painting as

per drawing.486.00 Kg - -

365 Providing to work site and f ixing R.C.C. pole of

2.40 m height with 0.15m square at bottom and

0.12 m square at top in C.C. 1:2:4 using 20 mm

and down size granite or basalt metal with 4 Nos.

of 10 mm dia M.S. reinforcement and 17 Nos. of 6

mm dia stirrups. The pole will be embeded in C.C.

1:3:6 using 20 mm and down size granite or basalt

or trap metal for foundation of size

0.50x0.50x0.50m with necessary earth work for

barbed wire fencing including curing and including

cost of steel etc. , complete with al l lead. for all

material.

385.00 Nos - -

366Providing barbed G.I. wire fencing of 12 x 12

gauge to worksite and drawn into stone pillars or

iron pillars or RCC pillars or Poles including

drawing in holes wherever necessary excluding the

cost of pillars/poles but including the cost of

barbed wire and binding wire and labour charges

for fixing barbed wire either vertically or

horizontally, tieing etc., complete with all lead & lift.

5340.00 RM - -

13) INTERNAL ROAD AT WATER TREATMENT

PLANT SITE --

367 Providing laying granular sub base as per table

400-1/400-2 & Grading-1 of MORTH & H Revision

IV with sand gravel grushed stone or quarry fines

or any other granular material or combination of

those to give CBR of 30 on prepared sub grade in

accordance with the requiremet specification for

widening portion with plant mix methord

4500.00 cum - -






Eastimated


Item

No.Description Unit



thickness with Grade II metal using 1.00cum of 63

- 45mm HBG metal with 0.24 cum of gravel for

blindage per 10sqm including cost and

conveyance of all materials and stacking them at

site, to departmental gauge for premeasurement,

labour charges for spreading metal and gravel,

hand packing to camber, watering with all leads of

water and compaction by 80 - 100KN power roller

including hire charges and fuel charges for power

roller including hire charges and fuel charges for

power roller,water sprinkle and all other tools and

plants employed, barricarding etc., complete as

per clause 404 of MOST specification

270.00 Cum - -


thickness with Grade III metal using 1.00cum of

53 - 22.4mm IRC size HBG metal with 0.24 cumof gravel for blindage per 10sqm including cost

and conveyance of all materials and stacking them

at site, to departmental gauge for

premeasurement, labour charges for spreading

metal and gravel, hand packing to camber,

watering with all leads of water and compaction by

80 - 100KN power roller including hire charges and

fuel charges for power roller including hire charges

and fuel charges for power roller,water sprinkle

and all other tools and plants employed,

barricarding etc., complete as per clause 404 of

MOST specification

213.75 Cum - -

370 Applying tack coat of 3kgs/10sqm over the WBMsurface treated with premix using 4kgs of

bituminous binder for 10sqm area including cost of

binder labour for applying the required quantity to

bitumen as tack coat manually as per

specification.503

2850.00 Sqm - -

371 Providing and laying 25mm thick Dense

Bituminous Macadam (DBM, grading-2) course

using 80/100 grade of bitumen complete as per

MORTH Technical Specification

2850.00 Sqm - -






Eastimated


Item

No.Description Unit


14) INTERNAL & EXTERNAL ELECTRICAL

WORKS FOR WATER TREATMENT PLANT- -

372 Supply and Erection of 2Pole structure, suitable

one mount on 200KVA Transformer, 22KV AB

Switch, D.O.F. and Lightninig Aresstors etc

1.00 - -

373 Supply and Erection of one 200KVA-22KV/430V

Transformer pole mounted, oil fil led, natural air

cooled with copper winding. The transformer shall

have all accessories as per I.S and a Off load Tap

changer with 4 taps ±2.5% of the rated voltage.

1.00 - -

374 Supply and erection of M.V. panel floor mounted,

IP54 protection made of 14SWG M.S. sheet steel ,

duly enamel painted as per relevent I.S. Thepanel

shall consisit of following switch gears.

400A -MCCB AP -1

with all protection relay 100 A -MCCB -TPN -2

63A MCCB TPN -3

32A - MCCB - TPN - 5

1 6A MCB - TPN - 3

Voltmeter - 2

Ammeter - 2

Pilot Lambs - 1 set

Selector Switch-2 Nos

1 No - -

375 Cables:

Supply and laying of following cables from MDB.

The cable shall be PVC insulated PVC sheathed

with copper / Aluminium conductor armoured. Thecable shall be laid on suitable metallic pipe along

the passage of WTP.

- -

375.1 MDB to chemical House:

2Rx4Cx10 Sq mm PVC insulated PVC sheathed

armoured cable with copper conductor.

450.00 m - -

375.2MDB to clariflucoletor and

2Rx4Cx25 Sq mm Aluminium Conductor 380.00 m - -

375.3 Supply and laying of PVC insulated,PVC

sheathed,armoured cable with aluminium

conductor to be laid on earth 4C x 240Sqmm.

From transformer to control room

100.00 m - -





Eastimated


Item

No.Description Unit


380.3 20A-Power plug-32A - 6 6.00 Nos. - -

381 SDB at Wash Water Tank: - -

381.1 63A-TPN-MCCB-2 & 32A-TPN MCB -2 1.00 4W - -

381.2 16A-SP MCB -6 6.00 1B - -

382 SDB at Central Room(Street lights):

382.1 32A-TPN-MCCB-5 1.00 No. - -

382.2 16A-SP MCB -12 1.00 No. - -

382.3 Fuse units 32A -12 12.00 Nos. - -

383

Supply and carryout concealed with MS conduit

pipe utilising 2.5Sqmm cable copper conductor as

per specification.

383.1 Lighting points in the lab(filler house building) 8.00 points - -

383.2 Fan points in the lab 4.00 points - -

383.3 20 A dual pin sockets with plug 6.00 points - -

384

Supply and carryout concealed wiring with M.S.

conduit pipe utilising 2.5Sqmm copper cable for

comressor room

384.1 Lighting points 6.00 Nos. - -

384.2 Fan points 2.00 Nos. - -

384.3 20A Dual pin powerplug 4.00 Nos. - -

385 Fixing of industrial type 2x40 on FLT(2x18W) CLS

fittings of 230V capacity with elelctronic choke

complete with tube,clamp etc.8 Nos - -

386Fixing 48" sweep ceiling fan complete fan

clamp,electronic regulator etc4 Nos - -





Eastimated


Item

No.Description Unit


396 Supply and carry at of concealed wiring wi th MS

conduit wi th 2.5Sqmm/15Sqmm copper PVC

insulated PVC sheathed wire including circuit box

inside chemical house.

396.1 Light points 15 Nos. - -

396.2 fan points 15 Nos. - -

396.3Supply and fixing of 48" 1200mm sweep ceiling fan

with 300m down rod etc.5 Nos. - -

396.4Supply and fixing of 300mm (12") sweep exhaust

fan3 Nos. - -

397 Supply and wiring concealed with MS conduit,with

earth wire etc., with 2.5Sqmm / 1.5Sqmm copper

cable at centre fuse switch box for , chlorine

house, central room etc.

397.1 Light points 20 points - -

397.2 Fan points 10 points - -

397.3 15A Twin power plug points. 15 points - -

397.4 Wooden ladder 3m height 1 Nos. - -

397.5 TNEB HT supply metering board 1 - -

399 Provision for f low level indicator ,level switch,

pressure switch and design and provide

equipments etc.

- -

15 ) Mechanical Items for Water Treatment

Plant all units. - -

400 Aerator






Eastimated


Item

No.Description Unit


400.1 Manufacturing, Testing, supplying and delivery of

1100mm inner dia. (10mm thick to suit the

pressure of 14KSC to 24KSC) as per IS

3589/2001 MS spiral welded pipe(welded with

sleeve joint) including cost of welding joint

materials, 12mm thick inside and external epoxy

coating to the above ground level pipes wherever

necessary and test pressure conforming to IS

5504/1997 addendum and as per specification

directed by the department officers.( Inlet pipe to

Aerator -1100 mm dia MS pipe )

4 m - -

400.2 Provision for supply and del ivery of MS Pipes,


epoxy coating and outside coating with CM 25mm

thick -1100 mm dia Bell mouth

806 kg - -

400.3 Provision for supply and del ivery of MS Pipes,


epoxy coating and outside epoxy coating with CM

25mm thick -1100 mm dia duck foot bend (M.S)

551 kg - -

401 Channel to flash Mixer

401.1

Supply erecting and commissioning ultrasonic type

flow meter as complete and as per specification.

1 Nos - -

401.2 Supplying and fixing V-notch weir (MS) as per

specification in the channel.860 kg - -

402 Flash Mixer - -

402.1 Supply, erection and commissioning at site brand

new flash mixer as per specification includingmotor, Gear box, Shaft, Agitators etc. as compelte

and as per Specification.

2 Nos - -

403 Flow Division Chamber

403.1

Supplyand delivery of DI K7 Pipes as per IS 8329

/ 2000 and as amended t ime from to t ime -1100

mm diameter DI - k7 pipe for bypass

arrangement to Filter.

100 m - -






Eastimated


Item

No.Description Unit


403.2

Supplyand delivery of DI K7 Pipes as per IS 8329

/ 2000 and as amended timefrom to time -600mm

diameter DI - k7 pipe from aerator to Clarifloculator

as per spscification.

100 m - -

403.3

Supply and delivery of Sluice Valve with PN 1.0

Valves as per IS 14846/2000.- 600 mm dia SluiceValve for flow control

4 Nos - -

403.4Supply and delivery of DI Specials as per IS 9523/

2000 -600 mm dia - DI bends2248 kg - -

404 Clariflocculator - -

404.1 Supply and delivery of RCC -NP3 Pipes as per IS

458/ 2000 and as amended time from to time -600

mm dia RCC - NP3 class inlet pipe with SS joint

and rubber rings.

30 m - -


new Clari-flocculators ( 30m dia ) 4 Nos. as per

specif ication including Roatating, Access

Bridge/Walkway / Outer Rake Arm, Centre Cage/Inner Rake Arms, Slip Ring Assesmbly, Traction

Carriage Assembly, Vertical Flocculation Paddles

etc. as complete and as per specification.

4 Nos - -

404.3 Supply and delivery of CI Pipes as per IS 1536/

2000 and as amended time from to time -

Telescopoic Pipe for sludge withdrawl from

Clarifier

404.3.1 300 mm dia / 150 mm dia C.I telescopic pipe

(flanged C.I)100 RM - -

404.4 Supply and delivery of CI Pipes and as amended

time from to time -Hand wheel and driving

mechanism for operating sludge valve and

telescopic pipe

- -

404.4.1 Supply and delivery of CI specials and fittings and

as amended time from to time 300 mm dia CI Tee

184 kg - -

404.4.2 Supply and delivery of Sluice Valve with PN 1.0

Valves as per IS 14846/2000. -300 mm dia sluice

valves with dismantling joints for sludge withdrawl

4 Nos - -

404.4.3 Sludge connection to sludge pit 300 mm dia CI/DI

pipe for connection to common sludge pit180 m - -






Eastimated


Item

No.Description Unit


404.4.4 Supplyand delivery of DI K7 Pipes as per IS 8329

/ 2000 and as amended time from to time -for

used wash water 200 mm dia DI from filter to

sludge collection tank.

40 m - -

404.4.5 Supply and delivery of Sluice Valve with PN 1.0

Valves as per IS 14846/2000. 200 mm dia sluicevalve for above line. 1 No - -

404.4.6 Sludge thickner connection (pumping main) -

connection to thickner unit -100 mm D.I f rom

sludge sump to thickner.

40 m - -

404.4.7 Design,manufacture,Supply and Erection and

commissioning of sludge pump sets - 2 nos -5 Hp

set as specification.

2 Nos - -


/ 2000 and as amended time from to time -for

effluent disposal from sludge thickner -150 mm dia

DI pipe

80 m - -


/ 2000 and as amended time from to time -

Supernatent disposal from centrifuge -150 mm diaDI pipe

80 m - -

405 Filter House

405.1 Supplyand delivery of DI K7 Pipes as per IS 8329

/ 2000 and as amended timefrom to time -600mm

dia D.I pipe from 4 for Clari fier to f il ter c lari fier

outlet box to filter inlet channel

160 m - -

405.2 Supply and delivery of Sluice Valve with PN 1.0

Valves as per IS 14846/2000. -Fitting of 600 mm

dia Vlaves on-line to filter 6 channel

4 nos - -



pressure of 14KSC to 24KSC) as per IS3589/2001 MS spiral welded pipe(welded with


mater ials - 1100 mm dia M.S pipe from filter to

chlorination tank for Bye Pass arrangement.

100 m - -

405.4 Supply and delivery of Butter fly Valve wi th PN

1.0 Valves as per IS 14846/2000 - 1100 mm dia

Butterfly valve on the line with dismantling joints

/Flange adaption.

1 Nos - -



R t i Fi t E t d b th Bidd




Eastimated


Item

No.Description Unit







materials -Filter bye passing arrangement 1100

mm dia M.S pipe lined with C.M inside and Inside

from inlet channel to filter to chlorine contact tank

80 m - -


1.0 Valves as per IS 14846/2000 -Fitting 1000 mm

dia Butterfly valve on the l ine with dismantling

joints

1 Nos - -

406 Supply , del ivery and Fitting of Sluice Valve and

Sluice Gates in the filter - -

406.1Inlet Gates -500 X 400 mm dia Sluice Gates as

per IS 1334915 Nos - -

406.2Out let valve- 400 mm dia Sluice valve as per IS

1484615 Nos - -

406.3Wash water inlet -400 mm dia Sluice valve as per

IS 1484615 Nos - -

406.4Washwater outlet -600 mm dia Sluicevalve as per

IS 1484615 Nos - -

407 Piping on filter

407.1 90 mm PVC -12 kg/sq.cm with perforations 2640 m - -


time from to time - Manifold pipe 500 mm dia C.I

filter water collection.

72 m - -


time from to time -Air Pipe -150 mm dia C.I 72 m - -

407.4 Clear water feed pipe to fil ter for back washing

pipe gallery -400 mm dia D.I flanged pipe70 m - -

408 Fittings

408.1 Supply and delivery of CI Spcials and Fittings and

as amended t ime from to t ime Taper 500 mm X

400 mm for manifold to outlet

2472 kg - -





E i dI Rate in Figures to Entered by the Bidder




Eastimated


Item

No.Description Unit



/ 2000 and as amended time from to time -Piping

f rom wash water channel to used wash water

storage tank -600 mm dia D.I

100 m - -


/ 2000 and as amended t ime from to t ime-FromUsed wash water tank to Aerator for recycle

purpose - 100 mm dia D.I Pipe

100 m - -

410.3 Supply and delivery of Sluice Valve with PN 1.0

Valves as per IS 14846/2000 -100 mm dia Sluice

Valves

1 Nos - -

410.4 100 mm dia Non-Return valves 1 Nos - -

410.5 Design,manufacture,Supply and Erection and

commissioning of Pumps for pumping for recycling

- 5 HP pumpsets as per specification.

2 Nos - -

411Filtered water conveyance to chlorine contact

tank

411.1 Manufacturing, Testing, supplying and delivery of 1100mm inner dia. (10mm thick to suit the




materialsinside lining/ epoxy coating and outside

epoxy coating with CM 25mm thick -1100 mm dia

MS Pipe

50 m - -

411.2 Puddle pipes -1100 mm dia 120 Nos - -


1.0 Valves as per IS 14846/2000 1100 mm dia

Butter fly

1 Nos - -

411.4 Supply and delivery of Scour Valve with PN 1.0Valves as per IS 14846/2000 - 80 mm dia scour

valve to contact tank

1 nos - -

412 Chlorination Units

412.1 Supply and injectors of chlorinators of 10kg/day,

vaccum regulating / pressure relief valves and all

necessary chlorine gas pipe work including fixings

and supports , electrically operated change over

valves mannual isolating valves ,catch pots and

pressure switches gauges.

2 sets - -



E ti t dIt Rate in Figures to Entered by the Bidder




Eastimated


Item

No.Description Unit


412.2 Supply and installation of motive water pumpsets

,chlroine ejectors and all necessary strainers,

motive water pipe work, valves and non-return

valves

2 sets - -

412.3

Supply and installat ion of chlor ine solut ions

transfer system including solutions linesassociated manual isolating valves and tubes 2 sets - -

412.4Supply and instl lation of chlorine leak dectors

complete with leak sensors1 sets - -

412.5Supply and installation of venti lation fans and

associated duct work, louvers, grillers etc2 sets - -

412.6 Supply of safety requirements for handling chlorine

Leak, 2 Nos. gas masks with ful l face pieces, 2

Nos. Oxygen cylinders of capacity 5 kg, 2 Nos.

Ammonia bottles (500 ml), Wind direction indicator

and emergency kit.

2 set - -

412.7 Chlorine Cylinder Loading / unloading crane- 5

Tonne Capacity1 set - -

412.8 Supplying and f ixing the trolleys for seating

chlorine cylinder2 set - -

412.9 Supplying and errecting chlorine Tonner (Cylinder)3 Nos - -

413 Chemical House

413.1Electrically Operated Over Head Crane for

handling chemicals 5 Tonne capacity1 set - -


new Alum mixers as per specification including

motor, Gear box, Shaft, Agitators etc. as per

specification.

3 Set - -


new MS rubber lined constant head box for Alum

dosing & Lime dosing as per specifications

2 Set - -


new Lime mixers as per specification including

motor, Gear box, Shaf t, Agitators etc.as per

specification.

2 Set - -

413.5Providing the Mechanical type weighing scale -

500 kg capacity as per specification.1 No. - -



EastimatedItem Rate in Figures to Entered by the Bidder




Eastimated


Item

No.Description Unit


413.6Plumbing work for Alum & Lime solution

preparation tanks.as per specification.1 Job - -

413.7

Design,manufacture,Supply and Erection and

commissioning Pumpsets for dozing solutions - 1

Hp

2 Nos - -

413.8Providing and Supplying the Flow controllingequipments (constant head making

equipments,floars etc) for lime and Alum feeding

1 No. - -

414 Equipment for Sludge Thickner and Centrifuge


Sludge Thickner as per specification includin

Central cage structure, scraper arms, Suitable

electirc motor, reduction gear, central turntable and

full diameter fixed bridge with chequred plate, walk

way, with all assembly as per specification.

2 Unit - -

414.2 Supply, Erection and Commissioning the at site

brand new Decanter Centrifuge with Bowl

assembly, conveyor assembly, Frame & Cover,

Gear Box, AC Main drive motor with suitable 15

KW and counter transmission back drive system,

includes control panel and as complete and as per

specification.

1 unit - -

415Supplying, erectioning and testing the

following Laboratory Equipments for Water

415.1 Chloroscope - Chlorotex out fit Qualigns 1 kit - -

415.2PH meter - Cyberscan pH meter-510 Model

imported1 No. - -

415.3 Turbidity Meter- Nephtol turbidity meter 1 No. - -

415.4 Conductivity meter- imported Merck 1 No. - -

415.5 Hot plates- rectangular with SS top. 1 kit - -

415.6 Distilled water plant- 2 lt/hr capacity SS 1 kit - -

415.7 Hot ai r oven 18 x 18 x 18 inches with SS ins ide. 1 No. - -

415.8 Magnetic stirrer with hot plate 2 lt capacity 1 No. - -

415.9 Analytic Balance with weight box 1 Set - -







Eastimated


Item

No.Description Unit


415.10 Jar Test Apparatus 1 Set - -

415.11Fuming cupboard outer dimension 36 x 22 x 83

inches1 No. - -

415.12 Auto clave 12 x 12 inches SS 1 No. - -

415.13 Refrigerator (of 165 lt capacity) 1 No. - -

415.14 Incubator18 x 18 x 18 inches with SS inside 1 No. - -

415.15 Wooden racks of size 1.2x0.45x2.0 m 2 No. - -

415.16 Wooden working tables (size 1x2mx1.2m) 2 No. - -

415.17 Supply of 6 Nos. beakers (500 ml), 1 No.

dessicator (6 inch size), beaker, 6 Nos. conical

f lasks (250 ml), 6 Nos. pipettes (2 Nos. 10 ml,

2Nos. 5 ml, 2 Nos. 1 ml) , 6 Nos. volumetric flasks

(500 ml), 6 Nos. burette (100 ml), 2 Nos. burette

stands, reagent chemicals (BDH) required for 1

year. with approved by the Engineers.

1 Set - -

415.18 Supply of 5 Nos. Wooden tables, 12 Nos. Wooden

chairs and 4 Nos. cupboards of Godrej make with

approved by the Engineers.

1 Set - -

416 Mandatory spareparts for WTP:

1. Gland packing for Valves- 2 sets each size

2. Gland packing for Valves- 2 sets each pump

model,3. Oil seal for gear box- 2 sets for each size

and type,4. Fans for motor-one number for each

size and type,5. One set of rubber brushes, bolts &

nuts for each flexible coupl ings,6. One set of V-bel ts for Air blowers ( if required),7. One set of

fuses for all rating used,8. Indicator lamps- 2 nos

for each colour,9. Thermal overload relay- one

number of each rating used,10. Push button- one

number for start & one number for stop

1 Set - -

Total Amount in Figure -







Eastimated


Item

No.Description Unit


Total Amount in Words -

twad tuticorin tender instructions

Documents