n Two Boom Hydraulic Drill Jumbon MTI Montabert HC Series Driftern Intelsense II Drilling Controlsn All Mechanical Powertrainn Load Sensing Hydraulicsn EPA & MSHA Certified Engine

CORPORATE OFFICE 145 Magill Street, Lively, Ontario, Canada P3Y 1K6 Tel: 705.692.3661 Fax: 705.692.4850

MTI SALES 25 Fielding Road, Copper Cliff, Ontario, Canada P0M 1N0 Tel: 705.692.3661 Toll Free: 800.772.3661 Fax: 705.682.4508 A New World of Mining Expertise

NORTH BAY P.O. Box 1437, 21 Exeter Street, North Bay, Ontario, Canada P2B 8K6 Tel: 705.472.5207 Fax: 705.472.5861

www.mti.ca

Drift Runner 2SB

Specificationsn Weight: 40,500 lbs (18,370 kg)n Turning Radius: Inside: 12’ 4” (3.76m)

Outside: 21’ 11” (6.68m) n Turning Angle: 38°n Boom Guide Rollover: 360°n Drifter: 2 MTI Montabert HC50n Boom Extension: 36” (914mm)n Boom Coverage (Height): 18’ (5.49m)n Boom Coverage (Width): 23’ 1” (7.04m)n Tires: 12.00 x 20 Solid Luggedn Maximum Width: 6’ 10” (2.08m)

n Cable Reel: 250’ (76.2 m) Type G-GC

Standard Featuresn 2 MTI Montabert HC50 Percussion Driftersn Intelsense II Drilling Controlsn MTF Feed c/w replaceable wear stripsn Dana R20000 Series Transmission

c/w Torque Convertern EPA & MSHA Certified Enginesn Two 60 HP (45KW) electric motors driving

pumps for Percussion, Rotation & High Pressure

n 24v engine electricsn Large protective operators compartmentn Pilot Operated Controls n Boom

Parallelism

Optionsn HC109 Drifter (100 hp/74.5 KW

electric motor)n Optional Feed Lengthsn Optional Telescopic ROPS/FOPS

Canopy/Cabn Tire Optionsn Optional Cable Lengthsn Water Boostern Air Compressor

The MTI DIFT RUNNER SERIES two-boom hydraulic rig is designed for

drilling vertical, horizontal, andangled holes in underground

production & developmentheadings. It features two

hydraulic percussiondrifters designed to

drive headings 18’ by 23’ 2”

(5.49m by7.04m).

1331

38-0

02 r

ev.

J 4/

23/0

9

10’-3

”[3

112m

m]

8’-6

”[2

591

mm

]

25%

1’-1”[324 mm]

44’[13,402 mm]

38%

6’-5

”[1

946

mm

]

1’-9”[521 mm]

OPTIONAL CANOPY SB BOOMS

MTF-14 FEEDSw/ HC50 DRIFTERS

FEEDS SHOWN INTRAMMING POSITION

R12’-4”[R3759 mm]

38º

13’-2”[4018 mm]

R21-11”[R 6676 mm]

6’-6

”[1

976

mm

]

6’-10”

[2073 mm

]

20º

13’-2”[4018 mm]