ty-flo needle valves

TY-FLO® Needle Valves

TestingTylok TY-FLO® Needle Valves are 100% Helium leak tested to

1 x 10-4 ml/s ensuring performance and reliability.

1 Hex Bar Stock and 1/2” Angle Valves only

Materials of Construction

1 For pressure ratings of valves with tube fitting end connections, see CBC-Lok® or CS-Lok® catalogs.2 Temperature ratings based on working temperature of standard stem seals.

See o-ring/packing options for temperature ratings of optional stem seals and soft seat valve.

TylokTy-Flo® Needle Valves

Design/Features

# Component 316 SS Brass Steel1a Mini “T” Handle 316 SS N/A Steel1b “T” Handle 316 SS N/A Steel1c Round Knurled Handle 316 SS Brass Steel1d 1-3/8” Plastic Handle Phenolic1e 1-3/4” Plastic Handle Phenolic2 Set Screw 316 SS Steel3 Dust Cap1 Vinyl4 Valve Bonnet 316 SS Brass Steel

5 Valve Stem Chrome-plated 316 SS 316 SS

6 Bonnet Lock Pin1 316 SS N/A Steel7 Stem Back-up Ring Teflon®

8 Stem O-Ring Viton®

9 Valve Body 316 SS Brass Steel

SpeCifiCationS 316 Stainless Brass SteelHard Seat Soft Seat Hard Seat Soft Seat Hard Seat Soft Seat

Pressure Rating1

psig (bar)10,000 (689)

6,000 (413)

6,000(413)

3,000(206)

10,000(689)

6,000(413)

Temperature Rating2 °F (°C)

-10 to 200 (12 to 93)

-10 to 200 (12 to 93)

-10 to 200 (12 to 93)

For Orders and Information 1-800-321-0466 • Visit Us Online at www.tylok.com

• Hard (Vee) or Delrin® Soft Seat/Tip

• Orifice sizes from 0.172 to 0.438 in.

• Flow Coefficients (CV) from 0.42 to 2.70

• Straight or angle flow patterns

• Optional panel mount

• Handle options available

• Non-wetted stem threads

1a

1b

1c

1d

1e

9

78

2

2

2

2

2

3

4

5

6

2

F

A

F

G

openE

C

B

openJ

H2

H1

D

Straight pattern Angle pattern


Valve Dimension Table

CBC-Lok® double ferrule tube ends are completely interchangeable with Swagelok® and Parker A-Lok® tube ends.

CS-Lok® single ferrule tube ends are completely interchangeable with Parker CPI® tube ends.

end ConnectionsBasic part

numberorifice

in. (mm)

CV Hard Seat

(Soft Seat/tip)

Dimensions, in. (mm)

inlet/outlet Size, in. a B C D e f G H1 H2 J

CBC-Lok®

tube fittings

1/4 4-6DD-4 0.172(4.4)

0.42(0.42)

2.46 (62.5)

1.23(31.2)

0.33(8.4) 3/4”

SQ

2.17(55.1) 1.81

(46)

- - - -

3/8 6-6DD-6 3.08(78.2)

1.54(39.1)

0.37(9.4)

2.13(54.1) - - - -

1/2 8-6DD-8 0.187(4.8) 0.44 3.30

(83.8)1.65

(41.9)0.63(16)

1-1/4” HEX

3.16(80.3)

2.50(63.5) - - - -

CS-Lok® tube fittings

1/4 4-6SS-4 0.172(4.4)

0.42(0.42)

2.46(62.5)

1.23(31.2)

0.33(8.4) 3/4”

SQ

2.17(55.1) 1.81

(46)

- - - -

3/8 6-6SS-6 3.08(78.2)

1.54(39.1)

0.37(9.4)

2.13(54.1) - - - -

1/2 8-6SS-8 0.187(4.8) 0.44 3.30

(83.8)1.65

(41.9)0.63(16)

1-1/4” HEX

3.16(80.3)

2.50(63.5) - - - -

femalenpt

1/8 2-6FF-2 0.172(4.4)

0.42(0.42)

1.81(46)

0.91(23)

0.38(9.7)

3/4”SQ

2.09(53.1)

1.81(46)

1.25(31.8)

0.88(22.4)

0.88(22.4) 2.09

(53.1)1/4 4-6FF-4 1.50(38.1)

1.13(28.7)

1.13(28.7)

3/8 6-6FF-6 0.187(4.8)

0.44(0.76)

2.50(63.5)

1.25(31.7)

0.63(16)

1-1/4” HEX

3.16(80.3)

2.50(63.5)

- - - -

1/2 8-6FF-8 2.00(50.8)

1.38(35.1)

1.38(35.1)

3.66(93)

3/4 12-6FF-12

0.438(11.1) 2.70 4.25

(108)2.13(54)

1.25(31.8)

2-1/2” HEX

4.25(108)

4.25(108)

- - - -

1 16-6FF-16 - - - -

1-1/4 20-6FF-20 - - - -

1-1/2 24-6FF-24 - - - -

Male npt

1/8 2-6MM-2 0.172(4.4)

0.42(0.42)

1.81(46)

0.91(23)

0.38(9.7)

3/4”SQ

2.09(53.1)

1.81(46)

1.25(31.8)

0.88(22.4)

0.72(18.3) 2.09

(53.1)1/4 4-6MM-4 1.50(38.1)

1.13(28.7)

0.88(22.4)

Male/female npt

1/8 2-6MF-2 0.172(4.4)

0.42(0.42)

1.81(46)

0.91(23)

0.38(9.7)

3/4”SQ

2.09(53.1)

1.81(46)

1.25(31.8)

0.88(22.4)

0.72(18.3) 2.09

(53.1)1/4 4-6MF-4 1.50(50.8)

1.13(28.7)

0.88(22.4)

1/2 8-6MF-8 0.187(4.8)

0.44(0.76)

3.50(88.9)

1.25(31.8)

0.63(16)

1-1/4” HEX

3.16(80.3)

2.50(63.5)

2.00(50.8)

1.38(35.1)

1.38(35.1)

3.66(93)

3/4 12-6MF-12

0.438(11.1) 2.70 5.25

(133.4)2.13(54)

1.25(31.8)

2-1/2” HEX

4.25(108)

4.25(108)

- - - -

1 16-6MF-16 - - - -

1-1/4 20-6MF-20 - - - -

1-1/2 24-6MF-24 - - - -

Dimensions shown with tube fitting ends finger-tight and standard configurations. Dimensions subject to change.


3

PANEL3/16 MAX

1/21-1/32

15/16 HEX NUT.16 THICK

5/8-18 THREAD

Dimensions For :Hex Bar Stock1/2" Angle Valves

PANEL1/8 MAX

7/167/8

15/16 HEX NUT.16 THICK

5/8-18 THREAD

Dimensions For :Square Bar Stock1/4" and Smaller

Angle Valves

1-13/16"

1/4"H1

4-1/4" (3/4" & Up Valves)2-1/2"

1/4"H2

1" RD

3/8"

5/32"H3

1-3/4"

1-1/16"

1/4"H5

1-3/8"

27/32"

1/4"H4


Panel Mount Details

Handle options

The handle material will always match the valve body, unless otherwise specified.

Standard Handles 316 SS Brass SteelSquare Bar Stock and 1/4” and Smaller Angle Valves H1 H3 H1

Hex Bar Stock and 1/2” Angle Valves H2 N/A H2


4

o-Ring/Packing optionsTemperature Ratings:

• -10°F to 200°F with Viton® O-Ring

• -65°F to 150°F with EPDM O-Ring

• -13°F to 300°F with Kalrez® O-Ring

• -65°F to 250°F with Teflon® Packing

• -20°F to 400°F with Grafoil® Packing

• 200°F max with Soft Seat/Tip Valves

Flow Data at 100°F (37°C)

Packing style detail shown above

0

0.05

0.1

0.15

0.2

0.25

0.3

0.35

0.4

0.45

0 1 2 3 4 5 6

# Turns Open

Flo

w C

oe

ffic

ient

(C

v)

Orifice (0.172) Hard and Soft Seat

0

0.05

0.1

0.15

0.2

0.25

0.3

0.35

0.4

0.45

0.5

0 1 2 3 4 5 6

# Turns OpenFl

ow

Co

effi

cie

nt (

Cv)

Orifice (0.187) Hard Seat

0

0.1

0.2

0.3

0.4

0.5

0.6

0.7

0.8

0 1 2 3 4 5

# Turns Open

Flo

w C

oe

ffic

ient

(C

v)

Orifice (0.187) Soft Seat

0

0.5

1

1.5

2

2.5

3

0 1 2 3 4 5 6 7 8 9

# Turns Open

Flo

w C

oe

ffic

ient

(C

v)

Orifice (0.438) Hard Seat



5

Chart 3 - Style H1 Mini “T” HandleH2 “T” HandleH3 Round Knurled HandleH4 1-3/8” Phenolic HandleH5 1-3/4” Phenolic Handle

*See handle options section for standard handles

Chart 7 - Handle options

Chart 5 - options

A Angle PatternL Delrin® Soft Stem/Seat

P1 Panel Mount (1 nut)P2 Panel Mount (2 nuts)

Example: SS-6-6DD-6-P2-T

Designates a Stainless Steel needle valve, with a 3/8” CBC-Lok® tube fitting inlet to a 3/8” CBC-Lok® tube fitting outlet with a 2 nut panel mount option and optional Teflon® packing.

Example:B-4-6FF-4-A

Designates a Brass angle needle valve with a 1/4” female NPT inlet to a 1/4” female NPT outlet.

Ty-Flo® needle valves are ordered as listed in this catalog by inserting the material code before the part number.Special configurations available upon request.

Example: A stainless steel needle valve with 1/2” CBC-Lok® tube fitting inlet to 1/2” CBC-Lok® tube fitting outlet with 2 nut panel mount option, Grafoil® packing and 1-3/4” phenolic handle is designated as follows.

1061 East 260th Street • Euclid, Ohio 44132Tel: (216) 261-7310 • 1-800-321-0466 • Fax: (216) 261-7317

[email protected] • www.tylok.com

Doc. 72304 Rev. A

SS - 8 - 6 DD - 8 p2 - G - H5↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓

Material Inlet Size Style Inlet/Outlet Outlet Size Options Seal HandleChart 1 Chart 2 Chart 3 Chart 4 Chart 2 Chart 5 Chart 6 Chart 7

Chart 1 - Material

SS Stainless SteelB BrassS Steel

Chart 2 - Valve Size

Designator port Size2 1/8”4 1/4”6 3/8”8 1/2”

12 3/4”16 1”20 1-1/4”24 1-1/2”

Chart 6 - Stem Seal

(Viton O-Ring Standard)EM1 EPDM 80 O-RingKZ1 Kalrez® 3018 O-RingG Grafoil® PackingT Teflon® Packing

6 Needle Valve

Chart 4 - Inlet/outlet Port

Designator inlet outletDD CBC-Lok® Tube Fitting CBC-Lok® Tube FittingSS CS-Lok® Tube Fitting CS-Lok® Tube FittingMM Male NPT Male NPTFF Female NPT Female NPTMF Male NPT Female NPT

REGISTRATIONS& TYPE APPROVALS

iSo 9001:2000Certificate # 012106

HoW To oRDERHow to order Ty-Flo® Needle Valves

-

TYLOK PIPE FITTINGS

1061 East 260th Street • Euclid, Ohio 44132 • (216) 261-7310 • 1-800-321-0466www.tylok.com • email: [email protected]

0

CO

MPA

NY

HIS

TOR

YH

OW

TO

ORD

ER

MATERIAL ABBREVIATIONS AND SPECIFICATIONSTylok Instrumentation Pipe Fittings are available in the following materials:

A - Aluminum S - Steel B - Brass SS - Stainless SteelPipe Catalog Raw materials Specifications:

Brass Forgings ASTM-B124 Alloy 377Brass Bar Stock ASTM-B16 Alloy 360, ASTM-B453 Alloy 345Stainless Steel Forging ASME-SA182, ASTM-A182Stainless Steel Bar Stock ASME-SA479, ASTM-A276Steel Bar Stock ASTM-A108

The above materials are considered standard materials of construction. Tylok can supply instru-mentation pipe fittings in other materials including Hastelloy C, Monel, Inconel and Titanium.Contact your local Tylok distributor for additional information.

QUALITY MANAGEMENT SYSTEMQMI has registered Tylok International’s Quality ManagementSystem to ISO 9001:2000. The quality system complies with theinternational standard ISO 9001:2000 and its technical equivalent,ANSI/ISO/ASQ Q9001:2000. Tylok strives to continuouslyimprove the effectiveness of the Quality Management System byeach member within the organization.

STYLE1 – STRAIGHT2 – ELBOW3 – TEE4 – CROSS

STANDARD NATION PIPE THREADSIZE 1 1/16-27 NPT SIZE 6 3/8 -18 NPTSIZE 2 1/8 -27 NPT SIZE 8 1/2 -14 NPTSIZE 4 1/4 -18 NPT SIZE 12 3/4 -14 NPT

SIZE 16 1.0-11 1/2 NPT

MATERIAL CODES-STEELSS-STAINLESS STEELB-BRASSM-MONELA-ALUMINUM

PIPE SIZE

FITTING DESCRIPTION

PIPE SIZE

SS-6-1RAFM-1

Cullen Crawford introduced the first flareless fitting in the mid 1940’s. Well known throughoutthe fitting industry, Mr. Crawford founded Tylok International, Inc., in the late 1950’s. Tylok’sproduct line has been used in applications for automotive, petrochemical, paper/pulp, navaland semi-conductor industries.

This catalog features our pipe fittings as well as general information on how to order. Pleasecall your local Distributor or Tylok International, Inc., if you need further assistance.

Tylok Pipe Fittings are ordered as listed in this catalog by inserting the material code before thepart number. Tylok Pipe Fittings can be identified through the part number as to material, pipesize, configuration and thread connection. The part number describes a complete fitting. Thesize nomenclature to describe a tee fitting is from left (1) to right (2) and down (3). Specialconfigurations available upon request.

1 2

3

ISO 9001:2000Certificate No.012106

1

TABLE OF C

ON

TENTS

/PROD

UC

T LOC

ATOR

TYLOK Precision Instrument Pipe Fittings

1HLNHex Long

Nipple

3

1FPUFemale Pipe

Union

3

1FPRUFemale Pipe

Reducer Union

3

1FMAFemale To Male

Adapter

2

1RAFMReducer Adapter –

Female To Male

5

1RBMFReducer Bushing –

Male To Female

5

1FPCFemale Pipe

Cap

2

1MPPMale Pipe

Plug

5

1MPHCMale Pipe

Hose Connector

4

1FPHCFemale Pipe

Hose Connector

2

3FMFPipe Tee – Female-

Male-Female

8

4FPCRFemale Pipe

Cross

8

2MMMale Pipe

Elbow

7

2FFFemale Pipe

Elbow

6

2FMFemale – Male

Pipe Elbow

6

2FMRFemale – Male

Reducer Pipe Elbow

6

3MMMAll Male Pipe Tee

8

3FFFAll Female Pipe Tee

7

Technical Information

9

TEC

HN

ICA

LIN

FORM

ATIO

N

1HNHex Nipple

4

1HRNHex Reducing

Nipple

4

3FFMPipe Tee – Female-

Female-Male

7

*NOTE: All dimensions subject to change, to be used for reference only.2

1FM

A1F

PC1F

PHC

FEMALE TO MALEADAPTER PA

RT N

O.

FEM

ALE

PIPE

SI

ZE A B TH

RU-H

OLE

C-H

EX

1-1FMA 1/16 1/16 1.000 .125 7/162-1FMA 1/8 1/8 1.062 .187 9/164-1FMA 1/4 1/4 1.375 .281 3/46-1FMA 3/8 3/8 1.562 .375 7/88-1FMA 1/2 1/2 1.906 .468 1-1/16

12-1FMA 3/4 3/4 1.937 .625 1-1/416-1FMA 1 1 2.281 .875 1-5/8

MAL

E PI

PE

SIZE

PART

NO

.

PIPE

TH

READ

SIZE

A B-H

EX

1-1FPC 1/16 .500 7/162-1FPC 1/8 .750 9/164-1FPC 1/4 .906 3/46-1FPC 3/8 1.031 7/88-1FPC 1/2 1.343 1-1/16

12-1FPC 3/4 1.437 1-1/416-1FPC 1 1.625 1-5/8

FEMALE PIPE CAP

PART

NO

.

FEM

ALE

PIPE

SI

ZE A B TH

RU-H

OLE

C-H

EX

HO

SE I.

D.

DFEMALE PIPE HOSECONNECTOR

2-1FPHC-2 1/8 1/8 1.187 .093 9/16 .4222-1FPHC-3 1/8 3/16 1.344 .125 9/16 .5902-1FPHC-4 1/8 1/4 1.500 .187 9/16 .7904-1FPHC-2 1/4 1/8 1.312 .093 3/4 .4224-1FPHC-3 1/4 3/16 1.465 .125 3/4 .5904-1FPHC-4 1/4 1/4 1.687 .187 3/4 .7904-1FPHC-6 1/4 3/8 1.781 .281 3/4 .8904-1FPHC-8 1/4 1/2 1.781 .406 3/4 .8906-1FPHC-4 3/8 1/4 1.718 .187 7/8 .7906-1FPHC-6 3/8 3/8 1.812 .281 7/8 .8906-1FPHC-8 3/8 1/2 1.812 .406 7/8 .8908-1FPHC-6 1/2 3/8 2.125 .281 1-1/16 .8908-1FPHC-8 1/2 1/2 2.078 .406 1-1/16 .8908-1FPHC-12 1/2 3/4 2.125 .656 1-1/16 .890

12-1FPHC-8 3/4 1/2 2.187 .406 1-1/4 .89012-1FPHC-12 3/4 3/4 2.187 .656 1-1/4 .89016-1FPHC-16 1 1 2.312 .906 1-5/8 .890

ABTHRU-HOLE

C-HEX

MALE PIPE SIZE

FEMALE PIPE SIZE

A

B-HEX

PIPETHREADSIZE

D

HOSE I.D.

C-HEX

BTHRUHOLE

FEMALE PIPE SIZE

A


1FPRU1FPU

HEX LONG NIPPLEPA

RT N

O.

MAL

E PI

PE S

IZE

A B TH

RU-H

OLE

C-H

EX

1-1HLN-★ 1/16 .125 3/82-1HLN-★ 1/8 .187 7/164-1HLN-★ 1/4 .281 9/166-1HLN-★ 3/8 .375 11/168-1HLN-★ 1/2 .468 7/8

12-1HLN-★ 3/4 .625 1-1/1616-1HLN-★ 1 .875 1-3/8

★ Made To OrderSpecify

Size

1HLN

1-1FPU 1/16 .812 .234 7/162-1FPU 1/8 .812 .328 9/164-1FPU 1/4 1.187 .421 3/46-1FPU 3/8 1.312 .562 7/88-1FPU 1/2 1.625 .687 1-1/16

12-1FPU 3/4 1.687 .890 1-1/416-1FPU 1 2.000 1.125 1-5/8

PART

NO

.

FEM

ALE

PIPE

SIZE A B TH

RU-H

OLE

C-H

EX FEMALE PIPEUNION

FEMALE PIPE REDUCER UNIONPA

RT N

O.

FEM

ALE

PIPE

SI

ZE A B TH

RU-H

OLE

C-H

EX

2-1FPRU-1 1/8 1/16 1.062 .234 9/164-1FPRU-1 1/4 1/16 1.218 .234 3/44-1FPRU-2 1/4 1/8 1.218 .328 3/46-1FPRU-1 3/8 1/16 1.312 .234 7/86-1FPRU-2 3/8 1/8 1.312 .328 7/86-1FPRU-4 3/8 1/4 1.375 .421 7/88-1FPRU-2 1/2 1/8 1.562 .328 1-1/168-1FPRU-4 1/2 1/4 1.750 .421 1-1/168-1FPRU-6 1/2 3/8 1.781 .562 1-1/16

12-1FPRU-2 3/4 1/8 1.718 .328 1-1/412-1FPRU-4 3/4 1/4 1.812 .421 1-1/412-1FPRU-6 3/4 3/8 1.843 .562 1-1/412-1FPRU-8 3/4 1/2 2.062 .687 1-1/416-1FPRU-2 1 1/8 1.843 .328 1-5/816-1FPRU-4 1 1/4 2.000 .421 1-5/816-1FPRU-6 1 3/8 2.062 .562 1-5/816-1FPRU-8 1 1/2 2.187 .687 1-5/816-1FPRU-12 1 3/4 2.250 .890 1-5/8

RED

UCED

FEM

ALE

PIPE

SIZ

E

A

BTHRU-HOLE

C-HEX

FEMALE PIPE SIZE

BTHRU-HOLE

A

C-HEXMALE PIPE SIZE

BTHRU-HOLE

A

C-HEX

FEMALE PIPE SIZE

REDUCED FEMALE PIPE SIZE


1HN

1HRN

1MPH

C

MALE PIPE HOSECONNECTOR PA

RT N

O.

MAL

E PI

PE

SIZE A B TH

RU-H

OLE

C-H

EX

HO

SE I.

D.

D

BTHRU-HOLE

MALE PIPE SIZE

A

C-HEX

HOSE I.D.

2-1MPHC-2 1/8 1/8 1.062 .093 7/16 .4222-1MPHC-3 1/8 3/16 1.187 .125 7/16 .5902-1MPHC-4 1/8 1/4 1.462 .187 7/16 .7904-1MPHC-2 1/4 1/8 1.234 .093 9/16 .4224-1MPHC-3 1/4 3/16 1.406 .125 9/16 .5904-1MPHC-4 1/4 1/4 1.609 .187 9/16 .7904-1MPHC-6 1/4 3/8 1.718 .281 9/16 .8904-1MPHC-8 1/4 1/2 1.718 .281 9/16 .8906-1MPHC-4 3/8 1/4 1.609 .187 11/16 .7906-1MPHC-6 3/8 3/8 1.781 .281 11/16 .8906-1MPHC-8 3/8 1/2 1.781 .375 11/16 .8908-1MPHC-6 1/2 3/8 1.953 .281 7/8 .8908-1MPHC-8 1/2 1/2 1.953 .406 7/8 .8908-1MPHC-12 1/2 3/4 1.968 .468 7/8 .890

12-1MPHC-8 3/4 1/2 1.968 .406 1-1/16 .89012-1MPHC-12 3/4 3/4 1.968 .625 1-1/16 .89016-1MPHC-16 1 1 2.171 .875 1-3/8 .890

D

1-1HN 1/16 .937 .125 3/82-1HN 1/8 1.000 .187 7/164-1HN 1/4 1.375 .281 9/166-1HN 3/8 1.406 .375 11/168-1HN 1/2 1.781 .468 7/8

12-1HN 3/4 1.812 .625 1-1/1616-1HN 1 2.281 .875 1-3/8

PART

NO

.

MAL

E PI

PE

SIZE

A B TH

RU-H

OLE

C-H

EX

HEX NIPPLE

HEX REDUCING NIPPLE PA

RT N

O.

MAL

E PI

PE

SIZE A B TH

RU-H

OLE

C-H

EX

2-1HRN-1 1/8 1/16 1.000 .125 7/164-1HRN-1 1/4 1/16 1.187 .125 9/164-1HRN-2 1/4 1/8 1.187 .187 9/166-1HRN-1 3/8 1/16 1.218 .125 11/166-1HRN-2 3/8 1/8 1.218 .187 11/166-1HRN-4 3/8 1/4 1.406 .281 11/168-1HRN-2 1/2 1/8 1.406 .187 7/88-1HRN-4 1/2 1/4 1.593 .281 7/88-1HRN-6 1/2 3/8 1.625 .375 7/8

12-1HRN-2 3/4 1/8 1.437 .187 1-1/1612-1HRN-4 3/4 1/4 1.625 .281 1-1/1612-1HRN-6 3/4 3/8 1.625 .375 1-1/1612-1HRN-8 3/4 1/2 1.812 .468 1-1/1616-1HRN-2 1 1/8 1.718 .187 1-3/816-1HRN-4 1 1/4 1.906 .281 1-3/816-1HRN-6 1 3/8 1.906 .375 1-3/816-1HRN-8 1 1/2 2.093 .468 1-3/816-1HRN-12 1 3/4 2.093 .625 1-3/8

RED

UCED

MAL

E

PIPE

SIZ

E

BTHRU-HOLE

A

C-HEX

REDUCED MALEPIPE SIZE

MALE PIPE SIZE

BTHRU-HOLE

A

C-HEX

MALE PIPE SIZE

*NOTE: All dimensions subject to change, to be used for reference only.

PART

NO

.

PIPE

TH

READ

A B-H

EX

1-1MPP 1/16 .750 3/82-1MPP 1/8 .750 7/164-1MPP 1/4 1.000 9/166-1MPP 3/8 1.062 11/168-1MPP 1/2 1.312 7/8

12-1MPP 3/4 1.375 1-1/1616-1MPP 1 1.687 1-3/8

PART

NO

.

FEM

ALE

PIPE

SI

ZE A B TH

RU-H

OLE

C-H

EX

2-1RAFM-1 1/8 1/16 1.093 .125 9/164-1RAFM-1 1/4 1/16 1.250 .125 3/44-1RAFM-2 1/4 1/8 1.250 .187 3/46-1RAFM-1 3/8 1/16 1.437 .125 7/86-1RAFM-2 3/8 1/8 1.437 .187 7/86-1RAFM-4 3/8 1/4 1.562 .281 7/88-1RAFM-2 1/2 1/8 1.687 .187 1-1/168-1RAFM-4 1/2 1/4 1.812 .281 1-1/168-1RAFM-6 1/2 3/8 1.812 .375 1-1/16

12-1RAFM-2 3/4 1/8 1.812 .187 1-1/412-1RAFM-4 3/4 1/4 1.968 .281 1-1/412-1RAFM-6 3/4 3/8 1.968 .375 1-1/412-1RAFM-8 3/4 1/2 2.062 .468 1-1/416-1RAFM-2 1 1/8 2.000 .187 1-5/816-1RAFM-4 1 1/4 2.125 .281 1-5/816-1RAFM-6 1 3/8 2.125 .375 1-5/816-1RAFM-8 1 1/2 2.250 .468 1-5/816-1RAFM-12 1 3/4 2.250 .625 1-5/8

RED

UCED

MAL

E

PIPE

SIZ

E

5

1MPP

1RAFM1RBM

F

REDUCER ADAPTER -FEMALE TO MALE

REDUCER BUSHING -MALE TO FEMALE

MALE PIPEPLUG

PART

NO

.

MAL

E PI

PE

SIZE A B TH

RU-H

OLE

C-H

EX

2-1RBMF-1 1/8 1/16 1.000 .187 7/164-1RBMF-1 1/4 1/16 .812 .234 9/164-1RBMF-2 1/4 1/8 1.000 .281 9/166-1RBMF-1 3/8 1/16 .843 .234 11/166-1RBMF-2 3/8 1/8 .843 .328 11/166-1RBMF-4 3/8 1/4 1.125 .375 3/48-1RBMF-2 1/2 1/8 1.062 .328 7/88-1RBMF-4 1/2 1/4 1.062 .421 7/88-1RBMF-6 1/2 3/8 1.312 .468 7/8

12-1RBMF-2 3/4 1/8 1.062 .328 1-1/1612-1RBMF-4 3/4 1/4 1.062 .421 1-1/1612-1RBMF-6 3/4 3/8 1.062 .562 1-1/1612-1RBMF-8 3/4 1/2 1.562 .625 1-1/1616-1RBMF-2 1 1/8 1.343 .328 1-3/816-1RBMF-4 1 1/4 1.343 .421 1-3/816-1RBMF-6 1 3/8 1.343 .562 1-3/816-1RBMF-8 1 1/2 1.343 .687 1-3/816-1RBMF-12 1 3/4 1.750 .875 1-3/8

RED

UCED

FEM

ALE

PIPE

SIZ

E

ABTHRU-HOLE

C-HEX

REDUCED MALEPIPE SIZE

FEMALE PIPE SIZE

A

B-HEXPIPETHREAD

SIZE

A

BTHRU-HOLE

C-HEX

MALE PIPE SIZE

REDUCEDFEMALE PIPE SIZE


1-2FM-1 1/16 .750 .718 .1252-2FM-2 1/8 .843 .843 .1874-2FM-4 1/4 .843 1.093 .2816-2FM-6 3/8 1.000 1.125 .3758-2FM-8 1/2 1.125 1.375 .468

12-2FM-12 3/4 1.437 1.500 .62516-2FM-16 1 1.625 1.937 .875

PART

NO

.

PIPE

SIZ

ES

A B C TH

RU-H

OLE

PART

NO

.

FEM

ALE

PIPE

SIZE

A B TH

RU-H

OLE

1-2FF-1 1/16 .750 .2342-2FF-2 1/8 .843 .3284-2FF-4 1/4 .968 .4216-2FF-6 3/8 1.000 .5628-2FF-8 1/2 1.125 .687

12-2FF-12 3/4 1.437 .89016-2FF-16 1 1.625 1.125

6

2FF

2FM

2FM

R

FEMALE PIPEELBOW

FEMALE - MALEPIPE ELBOW

A

A

BTHRU-HOLE

FEMALE PIPE SIZE

B

A

CTHRU-HOLE

MALE PIPE SIZE

FEMALE PIPE SIZE

FEMALE - MALEREDUCER PIPE ELBOW PA

RT N

O.

FEM

ALE

PIPE

SI

ZE

A B C TH

RU-H

OLE

2-2FMR-1 1/8 1/16 .750 .750 .1254-2FMR-1 1/4 1/16 .843 .937 .1254-2FMR-2 1/4 1/8 .843 .937 .1876-2FMR-1 3/8 1/16 1.000 .937 .1256-2FMR-2 3/8 1/8 1.000 .937 .1876-2FMR-4 3/8 1/4 1.125 1.187 .2818-2FMR-2 1/2 1/8 1.125 1.062 .1878-2FMR-4 1/2 1/4 1.125 1.250 .2818-2FMR-6 1/2 3/8 1.125 1.250 .375

12-2FMR-2 3/4 1/8 1.437 1.250 .18712-2FMR-4 3/4 1/4 1.437 1.375 .28112-2FMR-6 3/4 3/8 1.437 1.437 .37512-2FMR-8 3/4 1/2 1.437 1.625 .46816-2FMR-2 1 1/8 1.625 1.375 .18716-2FMR-4 1 1/4 1.625 1.625 .28116-2FMR-6 1 3/8 1.625 1.625 .37516-2FMR-8 1 1/2 1.625 1.812 .46816-2FMR-12 1 3/4 1.625 1.875 .625

MAL

E PI

PE

SIZE

FEMALE PIPE

A

B

CTHRU-HOLE

MALE PIPESIZE


PART

NO

.

MAL

E PI

PESI

ZE A B TH

RU-H

OLE

1-2MM-1 1/16 .718 .1252-2MM-2 1/8 .750 .1874-2MM-4 1/4 1.000 .2816-2MM-6 3/8 1.093 .3758-2MM-8 1/2 1.375 .468

12-2MM-12 3/4 1.500 .62516-2MM-16 1 1.875 .875

7

2MM

3FFF3FFM

MALE PIPEELBOW

1-3FFF-1 1/16 1.500 .750 .2342-3FFF-2 1/8 1.687 .843 .3284-3FFF-4 1/4 1.687 .843 .4216-3FFF-6 3/8 2.000 1.000 .5628-3FFF-8 1/2 2.250 1.125 .687

12-3FFF-12 3/4 2.625 1.312 .89016-3FFF-16 1 3.250 1.625 1.125

PART

NO

.

FEM

ALE

PIPE

SIZE A B C TH

RU-H

OLE

ALL FEMALE PIPE TEE

A

A

BTHRU-HOLE MALE

PIPE SIZE

ABB

B

CTHRU-HOLE

FEMALE PIPE SIZE

1-3FFM-1 1/16 1.500 .750 .718 .1252-3FFM-2 1/8 1.687 .843 .843 .1874-3FFM-4 1/4 1.875 .937 1.000 .2816-3FFM-6 3/8 2.000 1.000 1.125 .3758-3FFM-8 1/2 2.250 1.125 1.375 .468

12-3FFM-12 3/4 2.750 1.375 1.625 .62516-3FFM-16 1 3.250 1.625 1.937 .875

PIPE TEE - FEMALE-FEMALE-MALEPA

RT N

O.

PIPE

SIZ

ES

B C D T

HRU

-HO

LE

A

A

C

B B

DTHRU-HOLE

MALEPIPE SIZE

FEMALE PIPE SIZE


PART

NO

.

PIPE

SIZ

ES

B C D T

HRU

-HO

LE

1-3FMF-1 1/16 1.500 .750 .750 .1252-3FMF-2 1/8 1.687 .843 .843 .1874-3FMF-4 1/4 1.890 .843 1.046 .2816-3FMF-6 3/8 2.125 1.000 1.125 .3758-3FMF-8 1/2 2.500 1.125 1.375 .468

12-3FMF-12 3/4 2.937 1.437 1.500 .62516-3FMF-16 1 3.562 1.625 1.937 .875

A

8

3FM

F3M

MM

4FPC

R

PIPE TEE - FEMALE-MALE-FEMALE

FEMALE PIPECROSS

1-4FPCR 1/16 1.250 .625 .2462-4FPCR 1/8 1.687 .843 .3284-4FPCR 1/4 1.687 .843 .4216-4FPCR 3/8 2.125 1.062 .5628-4FPCR 1/2 2.250 1.125 .687

12-4FPCR 3/4 2.875 1.437 .89016-4FPCR 1 3.250 1.625 1.125

PART

NO

.

FEM

ALE

PIPE

SIZ

E

A B C TH

RU-H

OLE

A

B

B

C DTHRU-HOLE

MALE PIPE SIZE

FEMALE PIPE SIZE

A

A

BB

B

B

C THRU-HOLE

FEMALE PIPE SIZE

ALL MALE PIPE TEE

1-3MMM-1 1/16 1.437 .718 .1252-3MMM-2 1/8 1.437 .718 .1874-3MMM-4 1/4 1.875 .937 .2816-3MMM-6 3/8 2.000 1.000 .3758-3MMM-8 1/2 2.750 1.375 .468

12-3MMM-12 3/4 2.750 1.375 .62516-3MMM-16 1 3.750 1.875 .875

PART

NO

.

MAL

E PI

PESI

ZE A B C TH

RU-H

OLE

A

B

BB

CTHRU-HOLE

MALE PIPE SIZE

9

TECH

NIC

AL INFO

RMATIO

NUSE/APPLICATION

Tylok Pipe Fittings are designed and manufactured for applications in power, processing and instrumentation.In designing a system incorporating pipe fittings, it is the designer’s or user’s obligation and responsibility to deter-mine the appropriate fittings to be used for each application, and to insure proper installation and maintenance.

DESIGN/FEATURESTylok Pipe Fittings are manufactured to the same high quality standards as other Tylok Fittings. Each fitting is thoroughly cleaned to eliminate system contamination and features an attractive surface finish to enhance the appearance of modern scientific instrumentation and equipment.

PIPE THREAD SPECIFICATIONSTylok Pipe Fittings are manufactured from materials meeting applicable ASTM or ASME specifications, with pipe threads which meet or exceed ANSI B1.20.1 requirements. Strict quality control procedures are followed through-out production.

Materials: Brass ■ Steel ■ 316 Stainless SteelAluminum ■ Other materials available as special order

Suggest Allowable Working Pressures for Male Pipe Threads

Suggest Allowable Working Pressures for Female Pipe Threads

These charts are to be used as a guide only and are based on normal wall thicknesses, used for the various sizes. These ratings may vary widely from effects suchas the proper use of sealants, size of stock, temperature, corrosion factors, etc. Therefore, Tylok International, Inc., assumes no responsibility for its accuracy in anyindividual design.

When using a combination of fittings such as Male Pipe threads with Female Pipe threads, the minimum rating applies.

HEAT TRACEABILITYTylok Pipe Fittings can be traced back to the original mill heat from which it was made. Starting with the originalbillet, the mill creates a certificate which completely describes the chemical and physical makeup. This is useful forproviding a method for complete material accountability for the manufacturer and end customer.

TEMPERATURE RATINGSThe standard Tylok Instrumentation Fittings are rated at the following temperatures:

316 Stainless -325°F to 1200°F Brass -40°F to 400°F Steel1 -65°F to 400°F Aluminum -40°F to 400°F(-198°C to 648°C) (-40°C to 204°C) (-54°C to 204°C) (-40°C to 204°C)

Note: Consideration should be given to maximum temperature ratings if fittings are coated or plated.

1Special attention should be considered when selecting coated and/or plated materials such as Steel.

INSTALLATION INSTRUCTIONSPipe thread connections are very common in today’s industry. They are relatively easy to work with because of thecommon sizes and dimensions throughout manufacturing. It is important to use a thread sealant. These productsrange from pipe “dopes” to teflon tape, all of which can be purchased through your local Tylok Distributor.

MNPT 316 Stainless Steel Brass SteelSize PSI Rating PSI Rating PSI Rating1/16” 10,100 5,700 10,5001/8” 9,200 5,300 9,8001/4” 7,500 4,100 8,0003/8” 7,250 4,000 7,7001/2” 6,900 3,900 7,3003/4” 6,600 3,700 7,0001” 5,000 2,700 5,000

FNPT 316 Stainless Steel Brass SteelSize PSI Rating PSI Rating PSI Rating1/16” 6,200 3,500 6,8001/8” 6,000 3,400 6,6001/4” 6,100 3,300 6,5003/8” 5,000 2,700 5,4001/2” 4,700 2,500 4,8003/4” 4,300 2,400 4,6001” 4,100 2,300 4,500

Doc. 72306 Rev. C

TYLOK PHILOSOPHYOUR HISTORY

In the mid 1940ʼs, Cullen Crawford founded the Crawford Fitting Company. Mr. Crawford developed and patentedthe original flareless fitting (nut and two ferrule system), for the Crawford Fitting Company. Thus, a new and innov-ative industry was born making it far easier to make tubing connections. This reduces installation time and errors.Since his invention, End Users from all four corners of the globe have made billions of connections. This systemprovides leak proof seals and thus Mr. Crawford has been named “The founder of the flareless fitting.”

OUR MISSIONIt is our mission, at Tylok International, Inc., to continuously strive for and achieve total customer satisfaction withboth our products and services.

OUR GOALTylokʼs aggressive goal is to establish ourselves as an industry leader and expand our market share. This is main-tained in every department within the organization. Our “total effort” will guard against losing the personal touchthat makes our business enjoyable and prosperous for all involved.

INSTRUMENTATION TUBE FITTINGS – Tylok Standard4 Seal, CBC-Lok™, CS-Lok™ • PIPE FITTINGS •

WELD FITTINGS • BALL VALVES – Ty-Flo® Standard &Ty-Flo® 3 Piece • NEEDLE VALVES • INSTRUMENTATION

MANIFOLDS • FLEXIBLE METAL HOSE •

TYLOK INTERNATIONAL, INC.1061 East 260th Street • Euclid, Ohio 44132

Tel: (216) 261-7310 • 1-800-321-0466 • Fax: (216) [email protected]

www.tylok.com

CBC-LOK® Tube Fittings

34

1

Our GoalTylok’s aggressive goal is to establish ourselves as an industry leader and expand our marketshare. This is maintained in every department within the organization. Our “total effort” willguard against losing the personal touch that makes our business enjoyable and prosperousfor all involved.

2

Our MissionIt is our mission, at Tylok International, Inc., to continuously strive for and achieve totalcustomer satisfaction with both our products and services.

This objective falls within the framework of the larger movement toward “Total Quality” which is derived of four elements:

Make our distributors andsuppliers our partners inproviding the highest qualityproducts and services

Continuous financialsuccess of the company

Total satisfactionof our customers

We accomplish this by maintaining an honest and ethical business relationship with our customers, suppliers and employees.

Create a positiveenvironment for ouremployees that fosterstheir full potential

The Tylok Philosophy

TYLOKTylokTylok

1For Orders and Information 1-800-321-0466 • Visit Us Online at www.tylok.com

Creation of an IndustryIn the mid 1940s, Cullen Crawford founded theCrawford Fitting Company. Mr. Crawford developedand patented the original flareless fitting (nut and twoferrule system), for the Crawford Fitting Company.Thus, a new and innovative industry was born makingit far easier to make tubing connections. This reduces installation time and errors. Since hisinvention, End Users from all four corners of the globehave made billions of connections. This system provides leak proof seals and thus Mr. Crawford hasbeen named “The founder of the flareless fitting.”

Tylok International, Inc. offers a tube fitting line, CBC-Lok®, that is fully interchangeable with Swagelok® and Parker A-Lok®. Although it is alwaysrecommended to use all CBC-Lok® components,intermixing CBC-Lok® bodies and/or component partswith that of other manufacturers will not adversely affectsealing ability. CBC-Lok® Tube Fittings are made tostrict quality control standards and cannot guaranteethat of other manufacturers. CBC-Lok® Tube Fittings areproudly made in the U.S.A.

CBC-Lok® Tube Fittings are comprised of fourcomponents: The Body, Front Ferrule (Collet), RearFerrule (Collet) and Nut. A leak proof seal is obtainedthrough proper ferrule action as the ferrules aretightened onto the tubing via axial thrust provided bythe nut. The front ferrule provides the leak proof seal,when the nut and ferrules are properly drawn up thespecified number of turns. The rear ferrule grips thetubing preventing pull-off. The stainless steel nuts aresilver plated and a dry film lubricant is applied,reducing torque and ensuring proper sealing.

Ty-Cor™ refers to the treatment which diffuses carboninto the surface of the stainless steel, therebyincreasing the surface hardness without affecting thequality of the metal treated. In fact, when AISI 316stainless steel is treated, the corrosion resistance isequal to or better than non-treated 316 stainless steel.The increase in corrosion resistance to pitting andstress corrosion is very pronounced in media whichcontain chlorides (e.g. sea water, bleach, HCl, etc.).The Ty-Cor™ process applied to the rear ferrule alsohelps eliminate galling and ensures proper sealing ontube end make ups.

Tylok has received the Certificate ofType Approval from the AmericanBureau of Shipping (ABS). Thefollowing Part Families are ABSapproved: DFC – Female

Connector, DMC – Male Connector, DU – Union, DELU – Union Elbow, DME – Male Elbow and DTTT –Union Tee. For further information visit www.eagle.org.

• Double ferrule swaging action

• Total component interchangeability

• Heat Code traceable

• ASTM material construction

• Corrosion resistant 316 Stainless Steel rear ferrules

QMI has registered Tylok International’s QualityManagement System to ISO 9001:2000. The quality system complies with the international standard ISO 9001:2000 and its technical equivalent,ANSI/ISO/ASQ Q9001:2000. Tylok strives to continuously improve the effectiveness of the QualityManagement System by each member within the organization.

Quality Management System

Ty-Cor™ Process

Introduction

Features

ABS Certification

Operation

®


TYLOKTable of Contents/Product LocatorTable of Contents/Product Locator

2 For Orders and Information 1-800-321-0466 • Visit Us Online at www.tylok.com

DATANF DATPF DATPM DBHA DBHFPHow To Adapter Tube Adapter Tube Adapter Tube Bulkhead BulkheadOrder to AN to Female to Male Adapter Female Pipe

Flare Pipe Pipe Connector

4 5 6 7 8 9

DBHMP DBHU DBUANF DCAP DF PLUG DFCBulkhead Bulkhead Bulkhead Cap Fitting Plug FemaleMale Pipe Union to AN Flare ConnectorConnector Union

10 11 11 12 12 13

DMC DMC-ORS DMC-ORT DPCU DRATT DRPCMale O-Ring O-Ring Port Reducer Reducing

Connector Straight Thread Pipe Thread Connector Adapter Tube PortMale Conn. Male Conn. Union to Tube Connector

14 & 15 16 17 18 19 20

DRU DTBW DTSW DU DUANF DELUReducing Tube to Butt Tube to Socket Union Tube to Union Elbow

Union Weld Weld AN FlareConnector Connector Union

21 22 23 24 25 26

HOW

TO

ORDE

R



DFE DME DTBWE DTSWE DTFT DTMTFemale Elbow Male Elbow Tube to Butt Tube to Female Run Male Run

Weld Elbow Socket Weld Tee TeeElbow

27 28 & 29 30 31 32 33

DTTF DTTM DTTT DCR DBI DPIFemale Male Union Tee Union Cross Barbed Plane

Branch Tee Branch Tee Insert Insert

34 35 36 37 38 39

DN DKN DFC DRCNut Knurled Nut Front Collet Rear Collet Replacement Special

(Ferrule) (Ferrule) Parts Products

40 40 41 41 41 42

Installation Tubing Gas Service/ Technical Heat Tube InsertionInstructions Selection & Safety/ Data Traceability/ Chart/

Preparation Quality Mat’l Spec./ ApplicationsPre-Set Tool

43 44 45 46 47 48

COM

PONE

NTRE

PLAC

EMEN

T

PART

S

CBC-

LOK

®IN

STAL

LATI

ONIN

STRU

CTIO

NSCB

C-LO

K®TU

BING

SELE

CTIO

N &

PREP

ARAT

ION

GAS

SERV

ICE/

SAFE

TY/

QUAL

ITY

TECH

NICA

L DA

TA

TRAC

EABI

LITY

/

MAT

ERIA

L SP

EC./

PRE-

SET

TOOL

TUBE

INSE

RTIO

N

CHAR

T/AP

PLIC

ATIO

NS

SPEC

IAL

PROD

UCTS

HOW TO ORDERHow to Order CBC-LOK® Tube FittingsHow to Order CBC-LOK® Tube Fittings


CBC-Lok® Tube Fittings are ordered as listed in this catalog by inserting the material code before the part number. CBC-Lok® Tube Fittings can be identified through the part number as to material, tube size, configuration and threadconnection. The part number describes a complete fitting assembly. The size nomenclature to describe a tee fittingis from left (1) to right (2) and down (3). Special Configurations available upon request.

Example: A Stainless Steel Female Run Tee, 3/8" Tube Size to 1/4" Female Pipe to 3/8" Tube is designated asfollows.

Chart 2 - Tube O.D.Chart 1 - Material

Chart 3 - Style

Chart 4 - Description

B BrassSS Stainless SteelS Steel

D CBC-Lok®

Tube or Pipe AN TubeHose OD Thread Flare Size Pipe Thread

Designator (inches) (NPT) (inches) BSPP/BSPT

1 1/16 1/16-27 1/16-282 1/8 1/8-27 1/8 1/8-283 3/16 3/164 1/4 1/4-18 1/4 1/4-195 5/16 5/166 3/8 3/8-18 3/8 3/8-198 1/2 1/2-14 1/2 1/2-14

10 5/8 5/812 3/4 3/4-14 3/4 3/4-1414 7/8 7/816 1 1.0-11 1/2 1 1.0-11

DU UnionDUANF Tube to AN Flare UnionDELU Union ElbowDFE Female ElbowDME Male ElbowDTBWE Tube to Butt Weld ElbowDTSWE Tube to Socket Weld ElbowDTFT Female Run TeeDTMT Male Run TeeDTTF Female Branch TeeDTTM Male Branch TeeDTTT Union TeeDCR Union CrossDBI Barbed InsertDPI Plane InsertDN NutDKN Knurled NutDFC Front ColletDRC Rear Collet

DATANF Adapter Tube to AN FLareDATPF Adapter Tube to Female PipeDATPM Adapter Tube to Male PipeDBHA Bulkhead AdapterDBHFP Bulkhead Female Pipe ConnectorDBHMP Bulkhead Male Pipe ConnectorDBHU Bulkhead UnionDBUANF Bulkhead to AN Flare UnionDCAP CapDF PLUG Fitting PlugDFC Female ConnectorDMC Male ConnectorDMC-ORS O Ring Straight Thread Male ConnectorDMC-ORT O Ring Pipe Thread Male ConnectorDPCU Port Connector UnionDRATT Reducer Adapter Tube to TubeDRPC Reducing Port ConnectorDRU Reducing UnionDTBW Tube to Butt Weld ConnectorDTSW Tube to Socket Weld Connector

SS - 6 - D TFT - 4 1 2

Material Tube O.D. Style Description Odd End Size

Chart 1 Chart 2 Chart 3 Chart 4 Chart 23


DATANFDATANFDATANF

PART T J A D E L BHNUMBER INTERCHANGES WITH TUBE O.D. THREAD THRU HOLE BODY HEX

2-DATANF-2 2-TA-1-2AN 1/8 5/16-24 1.203 .448 .062 .531 3/82-DATANF-4 2-TA-1-4AN 1/8 7/16-20 1.312 .550 .094 .531 1/23-DATANF-3 3-TA-1-3AN 3/16 3/8-24 1.250 .479 .125 .562 7/164-DATANF-4 4-TA-1-4AN 1/4 7/16-20 1.469 .550 .172 .625 1/25-DATANF-5 5-TA-1-5AN 5/16 1/2-20 1.453 .550 .234 .656 9/166-DATANF-4 6-TA-1-4AN 3/8 7/16-20 1.531 .550 .172 .687 1/26-DATANF-6 6-TA-1-6AN 3/8 9/16-18 1.500 .556 .281 .687 5/88-DATANF-8 8-TA-1-8AN 1/2 3/4-16 1.906 .657 .391 .906 13/16

10-DATANF-10 10-TA-1-10AN 5/8 7/8-14 2.031 .758 .484 .969 15/1612-DATANF-12 12-TA-1-12AN 3/4 1-1/16-12 2.187 .864 .656 .969 1-1/816-DATANF-16 16-TA-1-16AN 1 1-5/16-12 2.531 .911 .937 1.219 1-3/8

Adapter Tube to

AN Flare


DATPFDATPFDATPF

Adapter Tube toFemale Pipe



T P A E L BHPART TUBE PIPE END THRU HOLE BODY HEX

NUMBER INTERCHANGES WITH O.D. NPT

2-DATPF-2 2-TA-7-2 2FA2N 1/8 1/8 1.234 .094 .531 9/16

2-DATPF-4 2-TA-7-4 2FA4N 1/8 1/4 1.375 .094 .531 3/4

3-DATPF-2 3-TA-7-2 3FA2N 3/16 1/8 1.266 .125 .562 9/16

3-DATPF-4 3-TA-7-4 3FA4N 3/16 1/4 1.406 .125 .562 3/4

4-DATPF-2 4-TA-7-2 4FA2N 1/4 1/8 1.312 .187 .625 9/16

4-DATPF-4 4-TA-7-4 4FA4N 1/4 1/4 1.469 .187 .625 3/4

4-DATPF-6 4-TA-7-6 4FA6N 1/4 3/8 1.562 .187 .625 7/8

4-DATPF-8 4-TA-7-8 4FA8N 1/4 1/2 1.812 .187 .625 1-1/16

5-DATPF-2 5-TA-7-2 5FA2N 5/16 1/8 1.359 .250 .656 9/16

5-DATPF-4 5-TA-7-4 5FA4N 5/16 1/4 1.516 .250 .656 3/4

6-DATPF-2 6-TA-7-2 6FA2N 3/8 1/8 1.391 .281 .687 9/16

6-DATPF-4 6-TA-7-4 6FA4N 3/8 1/4 1.547 .281 .687 3/4

6-DATPF-6 6-TA-7-6 6FA6N 3/8 3/8 1.625 .281 .687 7/8

6-DATPF-8 6-TA-7-8 6FA8N 3/8 1/2 1.843 .281 .687 1-1/16

8-DATPF-4 8-TA-7-4 8FA4N 1/2 1/4 1.719 .391 .906 3/4

8-DATPF-6 8-TA-7-6 8FA6N 1/2 3/8 1.859 .391 .906 7/8

8-DATPF-8 8-TA-7-8 8FA8N 1/2 1/2 2.093 .391 .906 1-1/16

10-DATPF-6 10-TA-7-6 10FA6N 5/8 3/8 1.828 .500 .969 7/8

10-DATPF-8 10-TA-7-8 10FA8N 5/8 1/2 2.093 .500 .969 1-1/16

12-DATPF-8 12-TA-7-8 12FA8N 3/4 1/2 2.093 .594 .969 1-1/16

14-DATPF-12 14-TA-7-12 14FA12N 7/8 3/4 2.203 .687 1.031 1-1/4

16-DATPF-12 16-TA-7-12 16FA12N 1 3/4 2.406 .797 1.219 1-1/4

16-DATPF-16 16-TA-7-16 16FA16N 1 1 2.547 .797 1.219 1-5/8

DATPMDATPMDATPM

Adapter Tube toMale Pipe


T P A D E1 L W BHPART TUBE PIPE END THRU BODY

NUMBER INTERCHANGES WITH O.D. NPT HOLE HEX

2-DATPM-2 2-TA-1-2 2MA2N 1/8 1/8 1.156 .375 .093 .531 .022 7/16

2-DATPM-4 2-TA-1-4 2MA4N 1/8 1/4 1.375 .562 .093 .531 .022 9/16

3-DATPM-2 3-TA-1-2 3MA2N 3/16 1/8 1.187 .375 .187 .562 .022 7/16

3-DATPM-4 3-TA-1-4 3MA4N 3/16 1/4 1.406 .562 .281 .562 .022 9/16

4-DATPM-2 4-TA-1-2 4MA2N 1/4 1/8 1.250 .375 .171 .625 .032 7/16

4-DATPM-4 4-TA-1-4 4MA4N 1/4 1/4 1.469 .562 .171 .625 .032 9/16

4-DATPM-6 4-TA-1-6 4MA6N 1/4 3/8 1.500 .562 .171 .625 .032 11/16

4-DATPM-8 4-TA-1-8 4MA8N 1/4 1/2 1.718 .750 .171 .625 .032 7/8

5-DATPM-2 5-TA-1-2 5MA2N 5/16 1/8 1.297 .375 .187 .656 .032 7/16

5-DATPM-4 5-TA-1-4 5MA4N 5/16 1/4 1.500 .562 .250 .656 .032 9/16

6-DATPM-2 6-TA-1-2 6MA2N 3/8 1/8 1.343 .375 .187 .687 .032 7/16

6-DATPM-4 6-TA-1-4 6MA4N 3/8 1/4 1.547 .562 .281 .687 .032 9/16

6-DATPM-6 6-TA-1-6 6MA6N 3/8 3/8 1.562 .562 .281 .687 .032 11/16

6-DATPM-8 6-TA-1-8 6MA8N 3/8 1/2 1.781 .750 .281 .687 .032 7/8

8-DATPM-4 8-TA-1-4 8MA4N 1/2 1/4 1.750 .562 .281 .906 .047 9/16

8-DATPM-6 8-TA-1-6 8MA6N 1/2 3/8 1.781 .562 .375 .906 .047 11/16

8-DATPM-8 8-TA-1-8 8MA8N 1/2 1/2 2.000 .750 .391 .906 .047 7/8

10-DATPM-6 10-TA-1-6 10MA6N 5/8 3/8 1.844 .562 .375 .969 .047 11/16

10-DATPM-8 10-TA-1-8 10MA8N 5/8 1/2 2.062 .750 .468 .969 .047 7/8

10-DATPM-12 10-TA-1-12 10MA12N 5/8 3/4 2.062 .750 .500 .969 .047 1-1/16

12-DATPM-8 12-TA-1-8 12MA8N 3/4 1/2 2.062 .750 .468 .969 .047 7/8

12-DATPM-12 12-TA-1-12 12MA12N 3/4 3/4 2.062 .750 .594 .969 .047 1-1/16

12-DATPM-16 12-TA-1-16 12MA16N 3/4 1 2.359 .937 .594 .969 .047 1-3/8

14-DATPM-12 14-TA-1-12 14MA12N 7/8 3/4 2.125 .750 .687 1.031 .047 1-3/8

16-DATPM-12 16-TA-1-12 16MA12N 1 3/4 2.312 .750 .625 1.218 .047 1-1/16

16-DATPM-16 16-TA-1-16 16MA16N 1 1 2.625 .937 .797 1.218 .047 1-3/8

*NOTE: All dimensions subject to change, to be used for reference only.1 The E dimension is the minimum opening. These fittings may have a larger opening at the pipe/straight thread end.

DBHADBHADBHA

T1 T2 A B C D E F L NH JNH BH PANELPART INTERCHANGES TUBE TUBE THRU NUT JAM NUT BODY HOLE

NUMBER WITH O.D. O.D. HOLE HEX HEX HEX

2-DBHA-2 200-R1-2 2TUBC2 1/8 1/8 1.953 .500 1.234 .531 .078 .969 1.687 7/16 1/2 1/2 21/64

4-DBHA-4 400-R1-4 4TUBC4 1/4 1/4 2.203 .609 1.328 .625 .187 1.031 1.906 9/16 5/8 5/8 29/64

6-DBHA-6 600-R1-6 6TUBC6 3/8 3/8 2.406 .656 1.453 .687 .281 1.156 2.125 11/16 3/4 3/4 37/64

8-DBHA-8 810-R1-8 8TUBC8 1/2 1/2 2.875 .906 1.656 .906 .391 1.250 2.468 7/8 15/16 15/16 49/64

Bulkhead Adapter




DBHFPDBHFPDBHFP

T P A B C D E L NH JNH BH PANELPART INTERCHANGES TUBE PIPE END THRU NUT JAM NUT BODY HOLE

NUMBER WITH O.D. NPT HOLE HEX HEX HEX

2-DBHFP-2 200-71-2 2FBC2N 1/8 1/8 1.766 .500 1.234 .969 .094 1.500 7/16 1/2 9/16 21/64

3-DBHFP-2 300-71-2 3FBC2N 3/16 1/8 1.797 .547 1.266 1.000 .125 1.531 1/2 9/16 9/16 25/64

4-DBHFP-2 400-71-2 4FBC2N 1/4 1/8 1.859 .609 1.328 1.031 .187 1.562 9/16 5/8 5/8 29/64

4-DBHFP-4 400-71-4 4FBC4N 1/4 1/4 2.047 .609 1.328 1.031 .187 1.750 9/16 5/8 3/4 29/64

5-DBHFP-2 500-71-2 5FBC2N 5/16 1/8 1.969 .641 1.422 1.125 .250 1.656 5/8 3/4 11/16 33/64

6-DBHFP-4 600-71-4 6FBC4N 3/8 1/4 2.172 .656 1.453 1.156 .281 1.875 11/16 3/4 3/4 37/64

8-DBHFP-6 810-71-6 8FBC6N 1/2 3/8 2.437 .906 1.656 1.250 .406 2.031 7/8 15/16 15/16 49/64

8-DBHFP-8 810-71-8 8FBC8N 1/2 1/2 2.625 .906 1.656 1.250 .406 2.219 7/8 15/16 1-1/16 49/64

10-DBHFP-8 1010-71-8 10FBC8N 5/8 1/2 2.656 .969 1.687 1.281 .500 2.250 1 1-1/16 1-1/16 57/64

16-DBHFP-16 1610-71-16 16FBC16N 1 1 3.687 1.234 2.266 1.781 .875 3.187 1-1/2 1-1/2 1-5/8 1-21/64

Bulkhead FemalePipe Connector


DBHMPDBHMPDBHMP

T P A B C D E1 F L NH JNH BH PANELPART INTERCHANGES TUBE PIPE END THRU NUT JAM NUT BODY HOLE

NUMBER WITH O.D. NPT HOLE HEX HEX HEX

1-DBHMP-1 100-11-1 1MBC1N 1/16 1/16 1.187 .437 .687 .375 .052 .531 1.031 5/16 7/16 5/16 13/64

1-DBHMP-2 100-11-2 1MBC2N 1/16 1/8 1.234 .437 .687 .375 .052 .531 1.094 5/16 7/16 7/16 13/64

2-DBHMP-2 200-11-2 2MBC2N 1/8 1/8 1.828 .500 1.234 .375 .094 .969 1.578 7/16 1/2 1/2 21/64

3-DBHMP-2 300-11-2 3MBC2N 3/16 1/8 1.859 .547 1.266 .375 .125 1.000 1.594 1/2 9/16 9/16 25/64

4-DBHMP-2 400-11-2 4MBC2N 1/4 1/8 1.953 .609 1.328 .375 .187 1.031 1.656 9/16 5/8 5/8 29/64

4-DBHMP-4 400-11-4 4MBC4N 1/4 1/4 2.109 .609 1.328 .562 .187 1.031 1.843 9/16 5/8 5/8 29/64

4-DBHMP-6 400-11-6 4MBC6N 1/4 3/8 2.187 .609 1.328 .562 .187 1.016 1.891 9/16 5/8 11/16 29/64

4-DBHMP-8 400-11-8 4MBC8N 1/4 1/2 2.484 .609 1.328 .562 .187 1.016 2.187 9/16 5/8 7/8 29/64

6-DBHMP-4 600-11-4 6MBC4N 3/8 1/4 2.266 .656 1.453 .562 .281 1.156 1.969 11/16 3/4 3/4 37/64

6-DBHMP-6 600-11-6 6MBC6N 3/8 3/8 2.312 .656 1.437 .562 .281 1.156 1.969 11/16 3/4 3/4 37/64

6-DBHMP-8 600-11-8 6MBC8N 3/8 1/2 2.609 .656 1.437 .750 .375 1.156 2.312 11/16 3/4 7/8 37/64

8-DBHMP-4 810-11-4 8MBC4N 1/2 1/4 2.547 .906 1.656 .562 .375 1.250 2.141 7/8 15/16 15/16 49/64

8-DBHMP-6 810-11-6 8MBC6N 1/2 3/8 2.484 .906 1.656 .562 .375 1.250 2.094 7/8 15/16 15/16 49/64

8-DBHMP-8 810-11-8 8MBC8N 1/2 1/2 2.719 .906 1.656 .750 .406 1.250 2.312 7/8 15/16 15/16 49/64

Bulkhead Male Pipe Connector



1 The E dimension is the minimum opening. These fittings may have a larger opening at the pipe/straight thread end.


DBHU/DBUANFDBHU/DBUANFDBHU/DBUANF

T A B C1 C2 D E L NH JNH BH PANELPART INTERCHANGES TUBE THRU NUT JAM NUT BODY HOLE

NUMBER WITH O.D. HOLE HEX HEX HEX

1-DBHU-1 100-61 1BC1 1/16 1.234 .344 .687 .437 .531 .052 .937 5/16 5/16 5/16 13/64

2-DBHU-2 200-61 2BC2 1/8 2.016 .500 1.234 .609 .969 .094 1.500 7/16 1/2 1/2 21/64

3-DBHU-3 300-61 3BC3 3/16 2.109 .547 1.266 .625 1.000 .125 1.594 1/2 9/16 9/16 25/64

4-DBHU-4 400-61 4BC4 1/4 2.266 .609 1.328 .703 1.031 .187 1.687 9/16 5/8 5/8 29/64

5-DBHU-5 500-61 5BC5 5/16 2.391 .641 1.406 .734 1.125 .250 1.812 5/8 11/16 11/16 33/64

6-DBHU-6 600-61 6BC6 3/8 2.453 .656 1.453 .766 1.156 .281 1.875 11/16 3/4 3/4 37/64

8-DBHU-8 810-61 8BC8 1/2 2.797 .906 1.656 .859 1.250 .406 2.000 7/8 15/16 15/16 49/64

10-DBHU-10 1010-61 10BC10 5/8 2.859 .969 1.687 .859 1.281 .500 2.062 1 1-1/16 1-1/16 57/64

12-DBHU-12 1210-61 12BC12 3/4 3.109 .969 1.875 .859 1.469 .625 2.312 1-1/8 1-3/16 1-3/16 1-1/64

14-DBHU-14 1410-61 14BC14 7/8 3.328 1.031 2.094 .875 1.687 .718 2.531 1-1/4 1-3/8 1-3/8 1-9/64

16-DBHU-16 1610-61 16BC16 1 3.766 1.234 2.266 1.047 1.781 .875 2.812 1-1/2 1-5/8 1-5/8 1-21/64

Bulkhead Union


T J A B C D E F L NH BH JNH PANELPART INTERCHANGES TUBE THREAD THRU NUT BODY JAM HOLE

NUMBER WITH O.D. HOLE HEX HEX NUT HEX

2-DBUANF-2 200-61-2AN 2XABC2 1/8 5/16-24 1.906 .516 1.234 .453 .062 .969 1.656 7/16 1/2 1/2 21/64

3-DBUANF-3 300-61-3AN 3XABC3 3/16 3/8-24 1.984 .547 1.266 .484 .125 1.000 1.719 1/2 9/16 9/16 25/64

4-DBUANF-4 400-61-4AN 4XABC4 1/4 7/16-20 2.125 .609 1.328 .547 .172 1.031 1.828 9/16 5/8 5/8 29/64

5-DBUANF-5 500-61-5AN 5XABC5 5/16 1/2-20 2.219 .641 1.406 .547 .234 1.125 1.922 5/8 11/16 11/16 33/64

6-DBUANF-6 600-61-6AN 6XABC6 3/8 9/16-18 2.250 .656 1.453 .562 .281 1.156 1.969 11/16 11/16 3/4 37/64

8-DBUANF-8 810-61-8AN 8XABC8 1/2 3/4-16 2.594 .906 1.656 .656 .391 1.250 2.187 7/8 15/16 15/16 49/64

10-DBUANF-10 1010-61-10AN 10XABC10 5/8 7/8-14 2.734 .969 1.687 .766 .484 1.281 2.234 1 1-1/16 1-1/16 57/64

12-DBUANF-12 1210-61-12AN 12XABC12 3/4 1-1/16-12 3.109 .969 1.875 .859 .609 1.469 2.719 1-1/8 1-3/16 1-3/16 1-1/64

16-DBUANF-16 1610-61-16AN 16XABC16 1 1-5/16-12 3.641 1.234 2.266 .906 .844 1.781 3.156 1-1/2 1-5/8 1-5/8 1-21/64

Bulkhead to ANFlare Union



DCAP/DF PLUGDCAP/DF PlugDCAP/DF Plug

PART T A B C L BH NHNUMBER INTERCHANGES WITH TUBE O.D. BODY HEX NUT HEX

1-DCAP 100-C 1BLEN1 1/16 .594 .344 .437 .437 5/16 5/16

2-DCAP 200-C 2BLEN2 1/8 .797 .500 .609 .531 7/16 7/16

3-DCAP 300-C 3BLEN3 3/16 .844 .547 .625 .578 7/16 1/2

4-DCAP 400-C 4BLEN4 1/4 .922 .609 .703 .625 1/2 9/16

5-DCAP 500-C 5BLEN5 5/16 .969 .641 .734 .672 9/16 5/8

6-DCAP 600-C 6BLEN6 3/8 1.016 .656 .766 .719 5/8 11/16

8-DCAP 810-C 8BLEN8 1/2 1.156 .906 .859 .750 13/16 7/8

10-DCAP 1010-C 10BLEN10 5/8 1.188 .969 .859 .781 15/16 1

12-DCAP 1210-C 12BLEN12 3/4 1.234 .969 .859 .844 1-1/16 1-1/8

14-DCAP 1410-C 14BLEN14 7/8 1.344 1.016 .859 .937 1-3/16 1-1/4

16-DCAP 1610-C 16BLEN16 1 1.516 1.234 1.047 1.031 1-3/8 1-1/2

PART T NHNUMBER INTERCHANGES WITH TUBE O.D. NUT HEX

1-DF PLUG 100-P 1BLP1 1/16 5/16

2-DF PLUG 200-P 2BLP2 1/8 7/16

3-DF PLUG 300-P 3BLP3 3/16 1/2

4-DF PLUG 400-P 4BLP4 1/4 9/16

5-DF PLUG 500-P 5BLP5 5/16 5/8

6-DF PLUG 600-P 6BLP6 3/8 11/16

8-DF PLUG 810-P 8BLP8 1/2 7/8

10-DF PLUG 1010-P 10BLP10 5/8 1

12-DF PLUG 1210-P 12BLP12 3/4 1-1/8

14-DF PLUG 1410-P 14BLP14 7/8 1-1/4

16-DF PLUG 1610-P 16BLP16 1 1-1/2

Cap

Fitting Plug




DFCDFCDFC

T P A B C E L NH BHPART TUBE PIPE END THRU NUT BODY

NUMBER INTERCHANGES WITH O.D. NPT HOLE HEX HEX

1-DFC-1 100-7-1 1FSC1N 1/16 1/16 .937 .344 .437 .052 .782 5/16 7/161-DFC-2 100-7-2 1FSC2N 1/16 1/8 .969 .344 .437 .052 .812 5/16 9/162-DFC-2 200-7-2 2FSC2N 1/8 1/8 1.125 .500 .609 .094 .875 7/16 9/162-DFC-4 200-7-4 2FSC4N 1/8 1/4 1.328 .500 .609 .094 1.062 7/16 3/42-DFC-6 200-7-6 2FSC6N 1/8 3/8 1.390 .500 .609 .094 1.125 7/16 7/83-DFC-2 300-7-2 3FSC2N 3/16 1/8 1.171 .547 .625 .125 .906 1/2 9/163-DFC-4 300-7-4 3FSC4N 3/16 1/4 1.344 .547 .625 .125 1.094 1/2 3/43-DFC-8 300-7-8 3FSC8N 3/16 1/2 1.594 .547 .625 .125 1.344 1/2 1-1/84-DFC-1 400-7-1 4FSC1N 1/4 1/16 1.203 .609 .703 .187 .906 9/16 1/24-DFC-2 400-7-2 4FSC2N 1/4 1/8 1.234 .609 .703 .187 .937 9/16 9/164-DFC-4 400-7-4 4FSC4N 1/4 1/4 1.406 .609 .703 .187 1.125 9/16 3/44-DFC-6 400-7-6 4FSC6N 1/4 3/8 1.484 .609 .703 .187 1.187 9/16 7/84-DFC-8 400-7-8 4FSC8N 1/4 1/2 1.670 .609 .703 .187 1.375 9/16 1-1/165-DFC-2 500-7-2 5FSC2N 5/16 1/8 1.266 .640 .734 .250 .969 5/8 9/165-DFC-4 500-7-4 5FSC4N 5/16 1/4 1.453 .640 .734 .250 1.156 5/8 3/45-DFC-6 500-7-6 5FSC6N 5/16 3/8 1.515 .640 .734 .250 1.218 5/8 7/85-DFC-8 500-7-8 5FSC8N 5/16 1/2 1.703 .640 .734 .250 1.406 5/8 1-1/166-DFC-2 600-7-2 6FSC2N 3/8 1/8 1.297 .656 .766 .281 1.000 11/16 5/86-DFC-4 600-7-4 6FSC4N 3/8 1/4 1.484 .656 .766 .281 1.187 11/16 3/46-DFC-6 600-7-6 6FSC6N 3/8 3/8 1.547 .656 .766 .281 1.250 11/16 7/86-DFC-8 600-7-8 6FSC8N 3/8 1/2 1.734 .656 .766 .281 1.437 11/16 1-1/166-DFC-12 600-7-12 6FSC12N 3/8 3/4 1.875 .656 .766 .281 1.593 11/16 1-1/48-DFC-4 810-7-4 8FSC4N 1/2 1/4 1.593 .906 .859 .406 1.187 7/8 13/168-DFC-6 810-7-6 8FSC6N 1/2 3/8 1.656 .906 .859 .406 1.250 7/8 7/88-DFC-8 810-7-8 8FSC8N 1/2 1/2 1.843 .906 .859 .406 1.437 7/8 1-1/168-DFC-12 810-7-12 8FSC12N 1/2 3/4 1.906 .906 .859 .406 1.500 7/8 1-1/48-DFC-16 810-7-16 8FSC16N 1/2 1 2.265 .906 .859 .406 1.875 7/8 1-5/8

10-DFC-4 1010-7-4 10FSC4N 5/8 1/4 1.797 .969 .859 .281 1.406 1 15/1610-DFC-6 1010-7-6 10FSC6N 5/8 3/8 1.656 .969 .859 .500 1.250 1 15/1610-DFC-8 1010-7-8 10FSC8N 5/8 1/2 1.844 .969 .859 .500 1.437 1 1-1/1610-DFC-12 1010-7-12 10FSC12N 5/8 3/4 1.953 .969 .859 .500 1.562 1 1-1/412-DFC-6 1210-7-6 12FSC6N 3/4 3/8 1.655 .969 .859 .500 1.265 1-1/8 1-1/1612-DFC-8 1210-7-8 12FSC8N 3/4 1/2 1.844 .969 .859 .625 1.437 1-1/8 1-1/1612-DFC-12 1210-7-12 12FSC12N 3/4 3/4 1.906 .969 .859 .625 1.500 1-1/8 1-1/412-DFC-16 1210-7-16 12FSC16N 3/4 1 2.265 .969 .859 .625 1.875 1-1/8 1-5/814-DFC-8 1410-7-8 14FSC8N 7/8 1/2 1.828 1.016 .859 .687 1.437 1-1/4 1-5/1614-DFC-12 1410-7-12 14FSC12N 7/8 3/4 1.969 1.016 .859 .719 1.562 1-1/4 1-3/814-DFC-16 1410-7-16 14FSC16N 7/8 1 2.234 1.016 .859 .719 1.843 1-1/4 1-5/816-DFC-12 1610-7-12 16FSC12N 1 3/4 2.109 1.234 1.047 .875 1.625 1-1/2 1-3/816-DFC-16 1610-7-16 16FSC16N 1 1 2.453 1.234 1.047 .875 1.969 1-1/2 1-5/8

Female Connector


®

DMCDMCDMC

T P A B C D E1 L NH BHPART TUBE PIPE END THRU NUT BODY


1-DMC-1 100-1-1 1MSC1N 1/16 1/16 .937 .344 .437 .375 .052 .797 5/16 5/16

1-DMC-2 100-1-2 1MSC2N 1/16 1/8 1.031 .344 .437 .375 .052 .875 5/16 7/16

2-DMC-1 200-1-1 2MSC1N 1/8 1/16 1.172 .500 .609 .375 .094 .906 7/16 7/16

2-DMC-2 200-1-2 2MSC2N 1/8 1/8 1.203 .500 .609 .375 .094 .937 7/16 7/16

2-DMC-4 200-1-4 2MSC4N 1/8 1/4 1.406 .500 .609 .562 .094 1.140 7/16 9/16

2-DMC-6 200-1-6 2MSC6N 1/8 3/8 1.406 .500 .609 .562 .094 1.156 7/16 11/16

2-DMC-8 200-1-8 2MSC8N 1/8 1/2 1.656 .500 .609 .750 .094 1.406 7/16 7/8

3-DMC-2 300-1-2 3MSC2N 3/16 1/8 1.234 .546 .625 .375 .125 .969 1/2 7/16

3-DMC-4 300-1-4 3MSC4N 3/16 1/4 1.437 .546 .625 .562 .125 1.171 1/2 9/16

4-DMC-1 400-1-1 4MSC1N 1/4 1/16 1.299 .609 .703 .375 .125 1.000 9/16 1/2

4-DMC-2 400-1-2 4MSC2N 1/4 1/8 1.299 .609 .703 .375 .187 1.000 9/16 1/2

4-DMC-4 400-1-4 4MSC4N 1/4 1/4 1.484 .609 .703 .562 .187 1.203 9/16 9/16

4-DMC-6 400-1-6 4MSC6N 1/4 3/8 1.516 .609 .703 .562 .187 1.219 9/16 11/16

4-DMC-8 400-1-8 4MSC8N 1/4 1/2 1.766 .609 .703 .750 .187 1.469 9/16 7/8

4-DMC-12 400-1-12 4MSC12N 1/4 3/4 1.828 .609 .703 .750 .187 1.531 9/16 1-1/16

4-DMC-16 400-1-16 4MSC16N 1/4 1 2.109 .609 .703 .937 .187 1.812 9/16 1-3/8

5-DMC-2 500-1-2 5MSC2N 5/16 1/8 1.343 .641 .734 .375 .187 1.047 5/8 9/16

5-DMC-4 500-1-4 5MSC4N 5/16 1/4 1.516 .641 .734 .562 .250 1.234 5/8 9/16

5-DMC-6 500-1-6 5MSC6N 5/16 3/8 1.547 .641 .734 .562 .250 1.250 5/8 11/16

5-DMC-8 500-1-8 5MSC8N 5/16 1/2 1.765 .641 .734 .750 .250 1.468 5/8 7/8

6-DMC-2 600-1-2 6MSC2N 3/8 1/8 1.390 .656 .766 .375 .187 1.109 11/16 5/8

6-DMC-4 600-1-4 6MSC4N 3/8 1/4 1.578 .656 .766 .562 .281 1.281 11/16 5/8

6-DMC-6 600-1-6 6MSC6N 3/8 3/8 1.578 .656 .766 .562 .281 1.281 11/16 11/16

6-DMC-8 600-1-8 6MSC8N 3/8 1/2 1.828 .656 .766 .750 .281 1.531 11/16 7/8

6-DMC-12 600-1-12 6MSC12N 3/8 3/4 1.875 .656 .766 .750 .281 1.593 11/16 1-1/16

6-DMC-16 600-1-16 6MSC16N 3/8 1 2.141 .656 .766 .937 .281 1.843 11/16 1-3/8

Male Connector



®


DMCDMCDMC

T P A B C D E1 L NH BHPART TUBE PIPE END THRU NUT BODY


8-DMC-2 810-1-2 8MSC2N 1/2 1/8 1.531 .906 .859 .375 .187 1.125 7/8 13/16

8-DMC-4 810-1-4 8MSC4N 1/2 1/4 1.719 .906 .859 .562 .281 1.312 7/8 13/16

8-DMC-6 810-1-6 8MSC6N 1/2 3/8 1.719 .906 .859 .562 .375 1.312 7/8 13/16

8-DMC-8 810-1-8 8MSC8N 1/2 1/2 1.937 .906 .859 .750 .406 1.531 7/8 7/8

8-DMC-12 810-1-12 8MSC12N 1/2 3/4 1.984 .906 .859 .750 .406 1.593 7/8 1-1/16

8-DMC-16 810-1-16 8MSC16N 1/2 1 2.250 .906 .859 .937 .406 1.859 7/8 1-3/8

10-DMC-4 1010-1-4 10MSC4N 5/8 1/4 1.934 .969 .859 .562 .281 1.343 1 15/16

10-DMC-6 1010-1-6 10MSC6N 5/8 3/8 1.934 .969 .859 .562 .375 1.343 1 15/16

10-DMC-8 1010-1-8 10MSC8N 5/8 1/2 1.937 .969 .859 .750 .469 1.531 1 15/16

10-DMC-12 1010-1-12 10MSC12N 5/8 3/4 1.984 .969 .859 .750 .500 1.593 1 1-1/16

10-DMC-16 1010-1-16 10MSC16N 5/8 1 2.172 .969 .859 .937 .500 1.781 1 1-3/8

12-DMC-4 1210-1-4 12MSC4N 3/4 1/4 1.796 .969 .859 .562 .281 1.405 1-1/4 1-1/8

12-DMC-6 1210-1-6 12MSC6N 3/4 3/8 1.796 .969 .859 .562 .375 1.405 1-1/4 1-1/8

12-DMC-8 1210-1-8 12MSC8N 3/4 1/2 1.984 .969 .859 .750 .468 1.593 1-1/8 1-1/16

12-DMC-12 1210-1-12 12MSC12N 3/4 3/4 1.984 .969 .859 .750 .625 1.593 1-1/8 1-1/16

12-DMC-16 1210-1-16 12MSC16N 3/4 1 2.250 .969 .859 .937 .625 1.859 1-1/8 1-3/8

14-DMC-8 1410-1-8 14MSC8N 7/8 1/2 1.984 1.015 .859 .750 .468 1.593 1-3/8 1-1/4

14-DMC-12 1410-1-12 14MSC12N 7/8 3/4 1.984 1.015 .859 .750 .625 1.593 1-1/4 1-3/16

14-DMC-16 1410-1-16 14MSC16N 7/8 1 2.250 1.015 .859 .937 .718 1.859 1-1/4 1-3/8

16-DMC-4 1610-1-4 16MSC4N 1 1/4 2.055 1.234 1.046 .562 .281 1.562 1-1/2 1-3/8

16-DMC-6 1610-1-6 16MSC6N 1 3/8 2.055 1.234 1.046 .562 .375 1.562 1-1/2 1-3/8

16-DMC-8 1610-1-8 16MSC8N 1 1/2 2.265 1.234 1.046 .750 .468 1.781 1-1/2 1-3/8

16-DMC-12 1610-1-12 16MSC12N 1 3/4 2.265 1.234 1.046 .750 .625 1.781 1-1/2 1-3/8

16-DMC-16 1610-1-16 16MSC16N 1 1 2.453 1.234 1.046 .937 .875 1.969 1-1/2 1-3/8

Male Connector


®

DMC-ORSDMC-ORSDMC-ORS

T J A B C D E1 L NH BHPART TUBE THREAD THRU NUT BODY O-RING

NUMBER INTERCHANGES WITH O.D. HOLE HEX HEX

1-DMC-ORS 100-1-OR 1M2SC1 1/16 5/16-24 1.047 .344 .437 .343 .047 .906 5/16 9/16 AS-011

2-DMC-ORS 200-1-OR 2M2SC2 1/8 5/16-24 1.297 .500 .609 .343 .094 1.031 7/16 9/16 AS-011

3-DMC-ORS 300-1-OR 3M2SC3 3/16 3/8-24 1.359 .547 .625 .375 .125 1.094 1/2 5/8 AS-012

4-DMC-ORS 400-1-OR 4M2SC4 1/4 7/16-20 1.516 .609 .703 .406 .187 1.219 9/16 3/4 AS-111

5-DMC-ORS 500-1-OR 5M2SC5 5/16 1/2-20 1.609 .641 .734 .437 .250 1.312 5/8 7/8 AS-112

6-DMC-ORS 600-1-OR 6M2SC6 3/8 9/16-18 1.672 .656 .766 .468 .281 1.375 11/16 15/16 AS-113

8-DMC-ORS 810-1-OR 8M2SC8 1/2 3/4-16 1.812 .906 .859 .468 .406 1.406 7/8 1-1/8 AS-116

12-DMC-ORS 1210-1-OR 12M2SC12 3/4 1-1/16-12 2.062 .969 .859 .562 .625 1.656 1-1/8 1-1/2 AS-215

16-DMC-ORS 1610-1-OR 16M2SC16 1 1-5/16-12 2.297 1.234 1.047 .562 .875 1.812 1-1/2 1-3/4 AS-219

O-Ring StraightThread MaleConnector


**NOTE: Stainless steel and carbon steel O-seal fittings up to 1 in. are rated to 3000 psi.1 The E dimension is the minimum opening. These fittings may have a larger opening at the pipe/straight thread end.



**NOTE: Stainless steel and carbon steel O-seal fittings up to 1 in. are rated to 3000 psi.1 The E dimension is the minimum opening. These fittings may have a larger opening at the pipe/straight thread end.

DMC-ORTDMC-ORTDMC-ORT

T P A B C D E1 L NH BHPART TUBE PIPE END THRU NUT BODY O-RING


2-DMC-2-ORT 200-1-2-OR 2M3SC2 1/8 1/8 1.297 .500 .609 .280 .094 1.031 7/16 3/4 AS-111

2-DMC-4-ORT 200-1-4-OR 2M3SC4 1/8 1/4 1.437 .516 .609 .375 .094 1.172 7/16 15/16 AS-113

3-DMC-4-ORT 300-1-4-OR 3M3SC4 3/16 1/4 1.469 .547 .641 .375 .125 1.203 1/2 15/16 AS-113

4-DMC-2-ORT 400-1-2-OR 4M3SC2 1/4 1/8 1.375 .609 .703 .280 .187 1.094 9/16 3/4 AS-111

4-DMC-4-ORT 400-1-4-OR 4M3SC4 1/4 1/4 1.516 .609 .703 .375 .187 1.219 9/16 15/16 AS-113

6-DMC-6-ORT 600-1-6-OR 6M3SC6 3/8 3/8 1.625 .656 .766 .406 .281 1.344 11/16 1-1/8 AS-116

6-DMC-8-ORT 600-1-8-OR 6M3SC8 3/8 1/2 1.859 .656 .766 .531 .281 1.562 11/16 1-3/8 AS-212

8-DMC-4-ORT 810-1-4-OR 8M3SC4 1/2 1/4 1.687 .906 .875 .375 .281 1.281 7/8 15/16 AS-113

8-DMC-8-ORT 810-1-8-OR 8M3SC8 1/2 1/2 1.969 .906 .859 .531 .406 1.562 7/8 1-3/8 AS-212

10-DMC-12-ORT 1010-1-12-OR 10M3SC12 5/8 3/4 2.062 .969 .875 .562 .500 1.656 1 1-1/2 AS-215

12-DMC-12-ORT 1210-1-12-OR 12M3SC12 3/4 3/4 2.062 .969 .875 .562 .625 1.656 1-1/8 1-1/2 AS-215

O-Ring Pipe ThreadMale Connector


DPCUDPCUDPCU

PART T A B ENUMBER INTERCHANGES WITH TUBE O.D. THRU HOLE

1-DPCU-1 101-PC 1PC1 1/16 .547 .422 .031

2-DPCU-2 201-PC 2PC2 1/8 .875 .625 .094

4-DPCU-4 401-PC 4PC4 1/4 .969 .734 .187

5-DPCU-5 501-PC 5PC5 5/16 1.016 .797 .250

6-DPCU-6 601-PC 6PC6 3/8 1.031 .797 .297

8-DPCU-8 811-PC 8PC8 1/2 1.406 1.016 .391

12-DPCU-12 1211-PC 12PC12 3/4 1.469 1.094 .594

16-DPCU-16 1611-PC 16PC16 1 1.906 1.359 .812

Port ConnectorUnion




DRATTDRATTDRATT

T1 T2 A B C E L NH BHPART TUBE TUBE THRU NUT BODY

NUMBER INTERCHANGES WITH O.D. O.D. HOLE HEX HEX

1-DRATT-2 100-R-2 2TUR1 1/16 1/8 1.156 .344 .437 .052 1.000 5/16 5/16

1-DRATT-4 100-R-4 4TUR1 1/16 1/4 1.234 .344 .437 .052 1.094 5/16 5/16

2-DRATT-1 200-R-1 1TUR2 1/8 1/16 1.141 .500 .609 .031 .875 7/16 7/16

2-DRATT-2 200-R-2 2TUR2 1/8 1/8 1.328 .500 .609 .078 1.062 7/16 7/16

2-DRATT-3 200-R-3 3TUR2 1/8 3/16 1.359 .500 .609 .094 1.094 7/16 7/16

2-DRATT-4 200-R-4 4TUR2 1/8 1/4 1.422 .500 .609 .094 1.156 7/16 7/16

2-DRATT-6 200-R-6 6TUR2 1/8 3/8 1.484 .500 .609 .094 1.219 7/16 7/16

2-DRATT-8 200-R-8 8TUR2 1/8 1/2 1.734 .500 .609 .094 1.484 7/16 9/16

3-DRATT-2 300-R-2 2TUR3 3/16 1/8 1.375 .547 .625 .078 1.109 1/2 7/16

3-DRATT-4 300-R-4 4TUR3 3/16 1/4 1.469 .547 .625 .125 1.203 1/2 7/16

4-DRATT-2 400-R-2 2TUR4 1/4 1/8 1.453 .609 .703 .078 1.156 9/16 1/2

4-DRATT-4 400-R-4 4TUR4 1/4 1/4 1.547 .609 .703 .187 1.250 9/16 1/2

4-DRATT-5 400-R-5 5TUR4 1/4 5/16 1.578 .609 .703 .187 1.281 9/16 1/2

4-DRATT-6 400-R-6 6TUR4 1/4 3/8 1.609 .609 .703 .187 1.312 9/16 1/2

4-DRATT-8 400-R-8 8TUR4 1/4 1/2 1.828 .609 .703 .187 1.531 9/16 9/16

4-DRATT-10 400-R-10 10TUR4 1/4 5/8 1.891 .609 .703 .187 1.609 9/16 11/16

5-DRATT-6 500-R-6 6TUR5 5/16 3/8 1.656 .641 .734 .250 1.359 5/8 9/16

5-DRATT-8 500-R-8 8TUR5 5/16 1/2 1.875 .641 .734 .250 1.578 5/8 9/16

6-DRATT-6 600-R-6 6TUR6 3/8 3/8 1.703 .656 .766 .281 1.406 11/16 5/8

6-DRATT-8 600-R-8 8TUR6 3/8 1/2 1.922 .656 .766 .281 1.625 11/16 5/8

6-DRATT-10 600-R-10 10TUR6 3/8 5/8 1.984 .656 .766 .281 1.687 11/16 11/16

6-DRATT-12 600-R-12 12TUR6 3/8 3/4 1.984 .656 .766 .281 1.687 11/16 13/16

8-DRATT-4 810-R-4 4TUR8 1/2 1/4 1.766 .906 .859 .187 1.375 7/8 13/16

8-DRATT-6 810-R-6 6TUR8 1/2 3/8 1.844 .906 .859 .281 1.437 7/8 13/16

8-DRATT-8 810-R-8 8TUR8 1/2 1/2 2.062 .906 .859 .406 1.656 7/8 13/16

8-DRATT-10 810-R-10 10TUR8 1/2 5/8 2.125 .906 .859 .406 1.719 7/8 13/16

8-DRATT-12 810-R-12 12TUR8 1/2 3/4 2.125 .906 .859 .406 1.719 7/8 13/16

8-DRATT-16 810-R-16 16TUR8 1/2 1 2.375 .906 .859 .406 1.969 7/8 1-1/16

10-DRATT-12 1010-R-12 12TUR10 5/8 3/4 2.156 .969 .859 .500 1.750 1 15/16

10-DRATT-14 1010-R-14 14TUR10 5/8 7/8 2.219 .969 .859 .500 1.812 1 15/16

10-DRATT-16 1010-R-16 16TUR10 5/8 1 2.406 .969 .859 .500 2.000 1 1-1/16

12-DRATT-8 1210-R-8 8TUR12 3/4 1/2 2.156 .969 .859 .391 1.750 1-1/8 1-1/16

12-DRATT-16 1210-R-16 16TUR12 3/4 1 2.469 .969 .859 .625 2.062 1-1/8 1-1/16

Reducer AdapterTube to Tube


DRPCDRPCDRPC

PART T1 T2 A B ENUMBER INTERCHANGES WITH TUBE O.D. TUBE O.D. THRU HOLE

2-DRPC-1 201-PC-1 1PC2 1/8 1/16 .687 .344 .031

4-DRPC-1 401-PC-1 1PC4 1/4 1/16 .719 .344 .031

4-DRPC-2 402-PC-2 2PC4 1/4 1/8 .891 .531 .094

6-DRPC-2 601-PC-2 2PC6 3/8 1/8 .906 .531 .094

6-DRPC-4 601-PC-4 4PC6 3/8 1/4 .984 .625 .187

8-DRPC-4 811-PC-4 4PC8 1/2 1/4 1.156 .625 .187

8-DRPC-6 811-PC-6 6PC8 1/2 3/8 1.203 .687 .281

12-DRPC-8 1211-PC-8 8PC12 3/4 1/2 1.437 .906 .391

Reducing PortConnector




DRUDRUDRU

T1 T2 A B1 B2 C1 C2 D E L NH1 NH2 BHPART INTERCHANGES TUBE TUBE THRU NUT NUT BODY

NUMBER WITH O.D. O.D. HOLE HEX HEX HEX

2-DRU-1 200-6-1 2RU1 1/8 1/16 1.219 .500 .344 .609 .437 .343 .052 .812 7/16 5/16 7/16

3-DRU-1 300-6-1 3RU1 3/16 1/16 1.266 .547 .344 .625 .437 .375 .052 .859 1/2 5/16 7/16

3-DRU-2 300-6-2 3RU2 3/16 1/8 1.437 .547 .500 .625 .609 .375 .094 .922 1/2 7/16 7/16

4-DRU-2 400-6-2 4RU2 1/4 1/8 1.516 .609 .500 .703 .609 .406 .094 .969 9/16 7/16 1/2

4-DRU-3 400-6-3 4RU3 1/4 3/16 1.547 .609 .547 .703 .625 .406 .125 1.000 9/16 1/2 1/2

5-DRU-2 500-6-2 5RU2 5/16 1/8 1.578 .641 .500 .734 .609 .437 .094 1.016 5/8 7/16 9/16

5-DRU-4 500-6-4 5RU4 5/16 1/4 1.656 .641 .609 .734 .703 .437 .187 1.078 5/8 9/16 9/16

6-DRU-1 600-6-1 6RU1 3/8 1/16 1.437 .656 .344 .765 .437 .468 .052 1.000 11/16 5/16 5/8

6-DRU-2 600-6-2 6RU2 3/8 1/8 1.609 .656 .500 .765 .609 .468 .094 1.062 11/16 7/16 5/8

6-DRU-4 600-6-4 6RU4 3/8 1/4 1.703 .656 .609 .765 .703 .468 .187 1.125 11/16 9/16 5/8

6-DRU-5 600-6-5 6RU5 3/8 5/16 1.734 .656 .641 .765 .734 .468 .250 1.156 11/16 5/8 5/8

8-DRU-2 810-6-2 8RU2 1/2 1/8 1.781 .906 .500 .859 .609 .468 .094 1.125 7/8 7/16 13/16

8-DRU-4 810-6-4 8RU4 1/2 1/4 1.859 .906 .609 .859 .703 .468 .187 1.156 7/8 9/16 13/16

8-DRU-6 810-6-6 8RU6 1/2 3/8 1.906 .906 .656 .859 .765 .468 .281 1.219 7/8 11/16 13/16

10-DRU-6 1010-6-6 10RU6 5/8 3/8 1.937 .969 .656 .859 .765 .468 .281 1.250 1 11/16 15/16

10-DRU-8 1010-6-8 10RU8 5/8 1/2 2.047 .969 .906 .859 .859 .468 .406 1.250 1 7/8 15/16

12-DRU-4 1210-6-4 12RU4 3/4 1/4 1.937 .969 .609 .859 .703 .468 .187 1.250 1-1/8 9/16 1-1/16

12-DRU-6 1210-6-6 12RU6 3/4 3/8 2.000 .969 .656 .859 .765 .468 .281 1.312 1-1/8 11/16 1-1/16

12-DRU-8 1210-6-8 12RU8 3/4 1/2 2.109 .969 .906 .859 .859 .468 .406 1.312 1-1/8 7/8 1-1/16

12-DRU-10 1210-6-10 12RU10 3/4 5/8 2.109 .969 .969 .859 .859 .468 .500 1.312 1-1/8 1 1-1/16

16-DRU-12 1610-6-12 16RU12 1 3/4 2.469 1.234 .969 1.047 .859 .562 .625 1.594 1-1/2 1-1/8 1-3/8

Reducing Union


DTBWDTBWDTBW

T BW A B C D E1 L NH BHPART TUBE THRU NUT BODY


2-DTBW-2 200-1-2W 2-1/8 ZHLW2 1/8 .405 1.203 .500 .609 .375 .094 .937 7/16 7/16

3-DTBW-2 300-1-2W 3-1/8 ZHLW2 3/16 .405 1.234 .547 .625 .375 .125 .969 1/2 7/16

4-DTBW-2 400-1-2W 4-1/8 ZHLW2 1/4 .405 1.297 .609 .703 .375 .187 1.000 9/16 1/2

4-DTBW-4 400-1-4W 4-1/4 ZHLW2 1/4 .540 1.484 .609 .703 .562 .187 1.203 9/16 9/16

5-DTBW-4 500-1-4W 5-1/4 ZHLW2 5/16 .540 1.516 .641 .734 .562 .250 1.234 5/8 9/16

6-DTBW-4 600-1-4W 6-1/4 ZHLW2 3/8 .540 1.578 .656 .766 .562 .281 1.281 11/16 5/8

6-DTBW-6 600-1-6W 6-3/8 ZHLW2 3/8 .675 1.578 .656 .766 .562 .281 1.281 11/16 3/4

6-DTBW-8 600-1-8W 6-1/2 ZHLW2 3/8 .840 1.828 .656 .766 .750 .281 1.531 11/16 7/8

8-DTBW-6 810-1-6W 8-3/8 ZHLW2 1/2 .675 1.719 .906 .859 .562 .406 1.312 7/8 13/16

8-DTBW-8 810-1-8W 8-1/2 ZHLW2 1/2 .840 1.937 .906 .859 .750 .406 1.531 7/8 7/8

8-DTBW-12 810-1-12W 8-3/4 ZHLW2 1/2 1.050 1.984 .906 .859 .750 .406 1.594 7/8 1-1/16

10-DTBW-8 1010-1-8W 10-1/2 ZHLW2 5/8 .840 1.937 .969 .859 .750 .500 1.531 1 15/16

12-DTBW-12 1210-1-12W 12-3/4 ZHLW2 3/4 1.050 1.984 .969 .859 .750 .625 1.594 1-1/8 1-1/16

16-DTBW-16 1610-1-16W 16-1 ZHLW2 1 1.315 2.453 1.234 1.047 .937 .875 1.969 1-1/2 1-3/8

Tube to Butt WeldConnector




DTSWDTSWDTSW

T1 T2 A B C D E F G L NH BHPART TUBE TUBE THRU NUT BODY

NUMBER INTERCHANGES WITH O.D. O.D. HOLE HEX HEX

2-DTSW-2 200-6-2W 2-2 ZHLW 1/8 1/8 1.141 .500 .609 .344 .094 .312 .250 .875 7/16 7/16

3-DTSW-3 300-6-3W 3-3 ZHLW 3/16 3/16 1.172 .547 .641 .375 .125 .422 .203 .906 1/2 7/16

4-DTSW-4 400-6-4W 4-4 ZHLW 1/4 1/4 1.328 .609 .703 .406 .187 .437 .312 1.031 9/16 1/2

6-DTSW-6 600-6-6W 6-6 ZHLW 3/8 3/8 1.484 .656 .766 .469 .281 .609 .375 1.187 11/16 5/8

8-DTSW-8 810-6-8W 8-8 ZHLW 1/2 1/2 1.625 .906 .859 .469 .406 .750 .500 1.219 7/8 13/16

10-DTSW-10 1010-6-10W 10-10 ZHLW 5/8 5/8 1.656 .969 .859 .469 .500 .922 .500 1.250 1 15/16

12-DTSW-12 1210-6-12W 12-12 ZHLW 3/4 3/4 1.719 .969 .859 .469 .625 1.047 .562 1.312 1-1/8 1-1/16

16-DTSW-16 1610-6-16W 16-16 ZHLW 1 1 2.078 1.234 1.047 .562 .875 1.312 .750 1.594 1-1/2 1-3/8

Tube to Socket Weld Connector


DUDUDU

T A B C D E L NH BHPART TUBE THRU NUT BODY


1-DU 100-6 1SC1 1/16 .984 .344 .437 .281 .052 .687 5/16 5/16

2-DU 200-6 2SC2 1/8 1.406 .500 .609 .343 .094 .875 7/16 7/16

3-DU 300-6 3SC3 3/16 1.469 .547 .625 .375 .125 .953 1/2 7/16

4-DU 400-6 4SC4 1/4 1.609 .609 .703 .406 .187 1.031 9/16 1/2

5-DU 500-6 5SC5 5/16 1.687 .641 .734 .437 .250 1.109 5/8 9/16

6-DU 600-6 6SC6 3/8 1.766 .656 .766 .468 .281 1.187 11/16 5/8

8-DU 810-6 8SC8 1/2 2.016 .906 .859 .468 .406 1.219 7/8 13/16

10-DU 1010-6 10SC10 5/8 2.047 .969 .859 .468 .500 1.250 1 15/16

12-DU 1210-6 12SC12 3/4 2.109 .969 .859 .468 .625 1.312 1-1/8 1-1/16

14-DU 1410-6 14SC14 7/8 2.187 1.016 .859 .468 .718 1.375 1-1/4 1-3/16

16-DU 1610-6 16SC16 1 2.547 1.234 1.047 .562 .875 1.594 1-1/2 1-3/8

Union



®


DUANFDUANFDUANF

T J A B C D E1 L NH BHPART TUBE THREAD THRU NUT BODY


2-DUANF-2 200-6-2AN 2XASC2 1/8 5/16-24 1.234 .500 .609 .448 .062 .984 7/16 7/16

2-DUANF-4 200-6-4AN 4XASC2 1/8 7/16-20 1.375 .500 .609 .550 .094 1.125 7/16 1/2

3-DUANF-3 300-6-3AN 3XASC3 3/16 3/8-24 1.328 .547 .641 .479 .125 1.062 1/2 7/16

4-DUANF-4 400-6-4AN 4XASC4 1/4 7/16-20 1.484 .609 .703 .550 .172 1.187 9/16 1/2

5-DUANF-5 500-6-5AN 5XASC5 5/16 1/2-20 1.516 .641 .734 .550 .234 1.219 5/8 9/16

6-DUANF-4 600-6-4AN 4XASC6 3/8 7/16-20 1.562 .656 .766 .550 .172 1.266 11/16 5/8

6-DUANF-6 600-6-6AN 6XASC6 3/8 9/16-18 1.562 .656 .766 .556 .297 1.266 11/16 5/8

8-DUANF-8 810-6-8AN 8XASC8 1/2 3/4-16 1.812 .906 .859 .657 .391 1.406 7/8 13/16

10-DUANF-10 1010-6-10AN 10XASC10 5/8 7/8-14 1.937 .969 .875 .758 .484 1.531 1 15/16

12-DUANF-12 1210-6-12AN 12XASC12 3/4 1-1/16-12 2.109 .969 .859 .864 .609 1.703 1-1/8 1-1/8

16-DUANF-16 1610-6-16AN 16XASC16 1 1-5/16-12 2.422 1.234 1.047 .911 .844 1.937 1-1/2 1-3/8

Tube to AN FlareUnion


DELUDELUDELU

T A B C E L NH WPART TUBE THRU NUT WRENCH

NUMBER INTERCHANGES WITH O.D. HOLE HEX FLAT

1-DELU-1 100-9 1EE1 1/16 .750 .344 .437 .052 .609 5/16 7/16

2-DELU-2 200-9 2EE2 1/8 .875 .500 .609 .094 .625 7/16 3/8

3-DELU-3 300-9 3EE3 3/16 1.000 .547 .625 .125 .734 1/2 1/2

4-DELU-4 400-9 4EE4 1/4 1.062 .609 .703 .187 .766 9/16 1/2

5-DELU-5 500-9 5EE5 5/16 1.125 .640 .734 .250 .844 5/8 9/16

6-DELU-6 600-9 6EE6 3/8 1.203 .656 .766 .281 .906 11/16 5/8

8-DELU-8 810-9 8EE8 1/2 1.421 .906 .859 .406 1.016 7/8 13/16

10-DELU-10 1010-9 10EE10 5/8 1.500 .969 .859 .500 1.109 1 15/16

12-DELU-12 1210-9 12EE12 3/4 1.578 .969 .859 .625 1.171 1-1/8 1-1/16

14-DELU-14 1410-9 14EE14 7/8 1.766 1.016 .859 .718 1.406 1-1/4 1-3/8

16-DELU-16 1610-9 16EE16 1 1.937 1.234 1.047 .875 1.438 1-1/2 1-3/8

Union Elbow



®


DFEDFEDFE

T P A1 A2 B C E L NH WPART TUBE PIPE END THRU NUT WRENCH

NUMBER INTERCHANGES WITH O.D. NPT HOLE HEX FLAT

1-DFE-2 100-8-2 1FEL2N 1/16 1/8 .812 .750 .500 .609 .052 .687 5/16 1/2

2-DFE-2 200-8-2 2FEL2N 1/8 1/8 .969 .750 .500 .609 .094 .719 7/16 1/2

2-DFE-4 200-8-4 2FEL4N 1/8 1/4 1.078 .875 .500 .609 .094 .828 7/16 11/16

3-DFE-2 300-8-2 3FEL2N 3/16 1/8 1.000 .750 .547 .625 .125 .734 1/2 1/2

4-DFE-2 400-8-2 4FEL2N 1/4 1/8 1.062 .750 .609 .703 .187 .781 9/16 1/2

4-DFE-4 400-8-4 4FEL4N 1/4 1/4 1.172 .875 .609 .703 .187 .875 9/16 11/16

4-DFE-6 400-8-6 4FEL6N 1/4 3/8 1.250 .875 .609 .703 .187 .969 9/16 13/16

4-DFE-8 400-8-8 4FEL8N 1/4 1/2 1.359 1.125 .609 .703 .187 1.078 9/16 1

5-DFE-2 500-8-2 5FEL2N 5/16 1/8 1.125 .750 .640 .734 .250 .844 5/8 9/16

5-DFE-4 500-8-4 5FEL4N 5/16 1/4 1.203 .875 .640 .734 .250 .906 5/8 11/16

6-DFE-2 600-8-2 6FEL2N 3/8 1/8 1.203 .750 .656 .766 .281 .906 11/16 5/8

6-DFE-4 600-8-4 6FEL4N 3/8 1/4 1.234 .875 .656 .766 .281 .937 11/16 11/16

6-DFE-6 600-8-6 6FEL6N 3/8 3/8 1.312 .875 .656 .766 .281 1.016 11/16 13/16

6-DFE-8 600-8-8 6FEL8N 3/8 1/2 1.429 1.125 .656 .766 .281 1.125 11/16 1

8-DFE-4 810-8-4 8FEL4N 1/2 1/4 1.429 .875 .906 .859 .406 1.016 7/8 13/16

8-DFE-6 810-8-6 8FEL6N 1/2 3/8 1.429 .875 .906 .859 .406 1.016 7/8 13/16

8-DFE-8 810-8-8 8FEL8N 1/2 1/2 1.531 1.125 .906 .859 .406 1.125 7/8 1

10-DFE-6 1010-8-6 10FEL6N 5/8 3/8 1.500 .875 .969 .859 .500 1.109 1 15/16

10-DFE-8 1010-8-8 10FEL8N 5/8 1/2 1.578 1.125 .969 .859 .500 1.171 1 1-1/16

12-DFE-8 1210-8-8 12FEL8N 3/4 1/2 1.578 1.125 .969 .859 .625 1.171 1-1/8 1-1/16

12-DFE-12 1210-8-12 12FEL12N 3/4 3/4 1.766 1.250 .969 .859 .625 1.359 1-1/8 1-3/8

14-DFE-12 1410-8-12 14FEL12N 7/8 3/4 1.766 1.250 1.016 .859 .718 1.359 1-1/4 1-3/8

16-DFE-12 1610-8-12 16FEL12N 1 3/4 1.937 1.250 1.234 1.049 .875 1.453 1-1/2 1-3/8

16-DFE-16 1610-8-16 16FEL16N 1 1 1.984 1.500 1.234 1.049 .875 1.500 1-1/2 1-11/16

Female Elbow



DMEDMEDME

T P A1 A2 B C D E1 L NH WPART TUBE PIPE END THRU NUT WRENCH


1-DME-1 100-2-1 1MSEL1N 1/16 1/16 .703 .656 .344 .437 .375 .052 .547 5/16 3/8

1-DME-2 100-2-2 1MSEL2N 1/16 1/8 .750 .703 .344 .437 .375 .052 .609 5/16 7/16

2-DME-1 200-2-1 2MSEL1N 1/8 1/16 .937 .703 .500 .609 .375 .094 .672 7/16 7/16

2-DME-2 200-2-2 2MSEL2N 1/8 1/8 .937 .703 .500 .609 .375 .094 .672 7/16 7/16

2-DME-4 200-2-4 2MSEL4N 1/8 1/4 .969 .922 .500 .609 .562 .094 .719 7/16 1/2

2-DME-6 200-2-6 2MSEL6N 1/8 3/8 1.203 1.125 .500 .609 .562 .094 .812 7/16 13/16

3-DME-2 300-2-2 3MSEL2N 3/16 1/8 1.000 .734 .547 .625 .375 .125 .734 1/2 1/2

3-DME-4 300-2-4 3MSEL4N 3/16 1/4 1.000 .922 .547 .625 .562 .125 .734 1/2 1/2

4-DME-1 400-2-1 4MSEL1N 1/4 1/16 1.203 .703 .609 .703 .375 .156 .719 9/16 1/2

4-DME-2 400-2-2 4MSEL2N 1/4 1/8 1.062 .734 .609 .703 .375 .187 .766 9/16 1/2

4-DME-4 400-2-4 4MSEL4N 1/4 1/4 1.062 .922 .609 .703 .562 .187 .766 9/16 1/2

4-DME-6 400-2-6 4MSEL6N 1/4 3/8 1.172 1.031 .609 .703 .562 .187 .875 9/16 11/16

4-DME-8 400-2-8 4MSEL8N 1/4 1/2 1.250 1.297 .609 .703 .750 .187 .969 9/16 13/16

4-DME-12 400-2-12 4MSEL12N 1/4 3/4 1.546 1.500 .609 .703 .750 .187 1.093 9/16 1-1/16

5-DME-2 500-2-2 5MSEL2N 5/16 1/8 1.125 .781 .641 .734 .375 .187 .844 5/8 9/16

5-DME-4 500-2-4 5MSEL4N 5/16 1/4 1.125 .969 .641 .734 .562 .250 .844 5/8 9/16

5-DME-6 500-2-6 5MSEL6N 5/16 3/8 1.203 1.031 .641 .734 .562 .250 .906 5/8 11/16

6-DME-2 600-2-2 6MSEL2N 3/8 1/8 1.203 .812 .656 .766 .375 .187 .906 11/16 5/8

6-DME-4 600-2-4 6MSEL4N 3/8 1/4 1.203 1.000 .656 .766 .562 .281 .906 11/16 5/8

6-DME-6 600-2-6 6MSEL6N 3/8 3/8 1.234 1.031 .656 .766 .562 .281 .937 11/16 11/16


Male Elbow


®


DMEDMEDME

T P A1 A2 B C D E1 L NH WPART TUBE PIPE END THRU NUT WRENCH


6-DME-8 600-2-8 6MSEL8N 3/8 1/2 1.312 1.297 .656 .766 .750 .281 1.016 11/16 13/16

6-DME-12 600-2-12 6MSEL12N 3/8 3/4 1.469 1.453 .656 .766 .750 .281 1.172 11/16 1-1/16

8-DME-2 810-2-2 8MSEL2N 1/2 1/8 1.609 1.109 .906 .859 .375 .187 .969 7/8 13/16

8-DME-4 810-2-4 8MSEL4N 1/2 1/4 1.422 1.109 .906 .859 .562 .281 1.016 7/8 13/16

8-DME-6 810-2-6 8MSEL6N 1/2 3/8 1.422 1.109 .906 .859 .562 .375 1.016 7/8 13/16

8-DME-8 810-2-8 8MSEL8N 1/2 1/2 1.422 1.297 .906 .859 .750 .406 1.016 7/8 13/16

8-DME-12 810-2-12 8MSEL12N 1/2 3/4 1.578 1.453 .906 .859 .750 .406 1.172 7/8 1-1/16

10-DME-4 1010-2-4 10MSEL4N 5/8 1/4 1.498 1.125 .969 .859 .562 .281 1.093 1 1

10-DME-6 1010-2-6 10MSEL6N 5/8 3/8 1.500 1.187 .969 .859 .562 .375 1.109 1 15/16

10-DME-8 1010-2-8 10MSEL8N 5/8 1/2 1.500 1.375 .969 .859 .750 .469 1.109 1 15/16

10-DME-12 1010-2-12 10MSEL12N 5/8 3/4 1.578 1.453 .969 .859 .750 .500 1.172 1 1-1/16

10-DME-16 1010-2-16 10MSEL16N 5/8 1 1.780 1.844 .969 .859 .937 .500 1.375 1 1-1/2

12-DME-4 1210-2-4 12MSEL4N 3/4 1/4 1.576 1.250 .969 .859 .562 .281 1.375 1-1/8 1-1/16

12-DME-6 1210-2-6 12MSEL6N 3/4 3/8 1.576 1.250 .969 .859 .562 .406 1.375 1-1/8 1-1/16

12-DME-8 1210-2-8 12MSEL8N 3/4 1/2 1.561 1.453 .969 .859 .750 .469 1.172 1-1/8 1-1/16

12-DME-12 1210-2-12 12MSEL12N 3/4 3/4 1.578 1.453 .969 .859 .750 .625 1.172 1-1/8 1-1/16

14-DME-12 1410-2-12 14MSEL12N 7/8 3/4 1.766 1.641 1.016 .859 .750 .625 1.359 1-1/4 1-3/8

16-DME-4 1610-2-4 16MSEL4N 1 1/4 1.935 1.375 1.234 1.047 .562 .281 1.531 1-1/2 1-1/2

16-DME-8 1610-2-8 16MSEL8N 1 1/2 1.935 1.562 1.234 1.047 .750 .500 1.531 1-1/2 1-1/2

16-DME-12 1610-2-12 16MSEL12N 1 3/4 1.937 1.641 1.234 1.047 .937 .625 1.453 1-1/2 1-3/8

16-DME-16 1610-2-16 16MSEL16N 1 1 1.937 1.828 1.234 1.047 .937 .875 1.453 1-1/2 1-3/8


Male Elbow

®

DTBWEDTBWEDTBWE

T BW A1 A2 B C D E1 L NH WPART TUBE THRU NUT WRENCH


2-DTBWE-2 200-2-2W 2-1/8 ZELW2 1/8 .405 .922 .719 .516 .609 .344 .094 .656 7/16 1/2

3-DTBWE-2 300-2-2W 3-1/8 ZELW2 3/16 .405 1.016 .734 .547 .641 .375 .125 .734 1/2 1/2

4-DTBWE-2 400-2-2W 4-1/8 ZELW2 1/4 .405 1.062 .734 .609 .703 .375 .187 .766 9/16 1/2

4-DTBWE-4 400-2-4W 4-1/4 ZELW2 1/4 .540 1.062 .937 .609 .703 .562 .187 .766 9/16 1/2

6-DTBWE-4 600-2-4W 6-1/4 ZELW2 3/8 .540 1.203 1.000 .656 .766 .562 .281 .906 11/16 5/8

8-DTBWE-6 800-2-6W 8-3/8 ZELW2 1/2 .675 1.375 1.125 .906 .859 .562 .406 .969 7/8 13/16

8-DTBWE-8 810-2-8W 8-1/2 ZELW2 1/2 .840 1.422 1.297 .906 .859 .750 .406 1.016 7/8 13/16

10-DTBWE-8 1010-2-8W 10-1/2 ZELW2 5/8 .840 1.437 1.312 .969 .859 .750 .500 1.031 1 7/8

12-DTBWE-12 1210-2-12W 12-3/4 ZELW2 3/4 1.050 1.578 1.453 .969 .859 .750 .625 1.172 1-1/8 1-1/16

16-DTBWE-12 1610-2-12W 16-3/4 ZELW2 1 1.050 1.937 1.625 1.234 1.047 .750 .875 1.453 1-1/2 1-5/16

16-DTBWE-16 1610-2-16W 16-1 ZELW2 1 1.315 1.937 1.844 1.234 1.047 .937 .875 1.453 1-1/2 1-5/16

Tube to Butt WeldElbow




DTSWEDTSWEDTSWE

T A1 A2 B C D E F L NH WPART TUBE THRU NUT WRENCH


2-DTSWE-2 200-9-2W 2-2 ZELWZ 1/8 .922 .625 .516 .609 .156 .094 .375 .656 7/16 5/16

3-DTSWE-3 300-9-3W 3-3 ZELWZ 3/16 .984 .687 .547 .641 .203 .125 .437 .719 1/2 7/16

4-DTSWE-4 400-9-4W 4-4 ZELWZ 1/4 1.062 .766 .609 .703 .312 .187 .500 .766 9/16 1/2

6-DTSWE-6 600-9-6W 6-6 ZELWZ 3/8 1.203 .906 .656 .766 .375 .281 .625 .875 11/16 5/8

8-DTSWE-8 810-9-8W 8-8 ZELWZ 1/2 1.422 1.016 .906 .859 .500 .406 .812 1.016 7/8 13/16

10-DTSWE-10 1010-9-10W 10-10 ZELWZ 5/8 1.562 1.156 .969 .875 .500 .500 .937 1.156 1 1-1/16

12-DTSWE-12 1210-9-12W 12-12 ZELWZ 3/4 1.562 1.312 .969 .875 .500 .625 1.094 1.156 1-1/8 1-1/16

16-DTSWE-16 1610-9-16W 16-16 ZELWZ 1 1.937 1.469 1.234 1.047 .562 .875 1.375 1.453 1-1/2 1-5/16

Tube to Socket Weld Elbow


DTFTDTFTDTFT

T P A A1 A2 B C E L NH WPART TUBE PIPE END THRU NUT WRENCH


2-DTFT-2 200-3TFT 2FRT2N 1/8 1/8 1.719 .969 .750 .500 .609 .094 .719 7/16 1/2

3-DTFT-2 300-3-2TFT 3FRT2N 3/16 1/8 1.766 1.016 .750 .547 .641 .125 .750 1/2 9/16

4-DTFT-2 400-3TFT 4FRT2N 1/4 1/8 1.812 1.078 .750 .609 .703 .187 .781 9/16 9/16

4-DTFT-4 400-3-4TFT 4FRT4N 1/4 1/4 2.047 1.172 .875 .609 .703 .187 .875 9/16 11/16

5-DTFT-2 500-3-2TFT 5FRT2N 5/16 1/8 1.922 1.172 .750 .641 .734 .250 .875 5/8 5/8

6-DTFT-4 600-3TFT 6FRT4N 3/8 1/4 2.109 1.234 .875 .656 .766 .281 .937 11/16 11/16

8-DTFT-4 810-3-4TFT 8FRT4N 1/2 1/4 2.562 1.437 1.125 .906 .875 .406 1.125 7/8 13/16

8-DTFT-6 810-3TFT 8FRT6N 1/2 3/8 2.297 1.422 .875 .906 .859 .406 1.016 7/8 13/16

8-DTFT-8 810-3-8TFT 8FRT8N 1/2 1/2 2.687 1.578 1.125 .906 .859 .406 1.172 7/8 1-1/16

10-DTFT-8 1010-3-8TFT 10FRT8N 5/8 1/2 2.656 1.531 1.125 .969 .875 .500 1.125 1 1-1/16

12-DTFT-12 1210-3-TFT 12FRT12N 3/4 3/4 3.016 1.766 1.250 .969 .859 .625 1.359 1-1/8 1-3/8

14-DTFT-12 1410-3-12TFT 14FRT12N 7/8 3/4 3.016 1.766 1.250 1.031 .875 .750 1.359 1-1/4 1-5/16

16-DTFT-12 1610-3-12TFT 16FRT12N 1 3/4 3.187 1.937 1.250 1.234 1.047 .875 1.453 1-1/2 1-5/16

16-DTFT-16 1610-3TFT 16FRT16N 1 1 3.516 2.016 1.500 1.234 1.047 .875 1.531 1-1/2 1-5/8

Female Run Tee




DTMTDTMTDTMT

T P A A1 A2 B C D E1 L NH WPART TUBE PIPE END THRU NUT WRENCH


2-DTMT-2 200-3TMT 2MRT2N 1/8 1/8 1.625 .937 .703 .500 .609 .375 .094 .672 7/16 7/16

3-DTMT-2 300-3TMT 3MRT2N 3/16 1/8 1.656 .969 .703 .547 .625 .375 .125 .703 1/2 7/16

4-DTMT-2 400-3TMT 4MRT2N 1/4 1/8 1.797 1.062 .734 .609 .703 .375 .187 .766 9/16 1/2

4-DTMT-4 400-3-4TMT 4MRT4N 1/4 1/4 1.984 1.062 .922 .609 .703 .562 .187 .766 9/16 5/8

5-DTMT-2 500-3TMT 5MRT2N 5/16 1/8 1.984 1.172 .828 .641 .725 .375 .187 .875 5/8 5/8

6-DTMT-4 600-3TMT 6MRT4N 3/8 1/4 2.203 1.203 1.000 .656 .766 .562 .281 .906 11/16 5/8

6-DTMT-6 600-3-6TMT 6MRT6N 3/8 3/8 2.422 1.312 1.109 .656 .766 .562 .281 1.016 11/16 13/16

8-DTMT-6 810-3TMT 8MRT6N 1/2 3/8 2.531 1.422 1.109 .906 .859 .562 .406 1.016 7/8 13/16

8-DTMT-8 810-3-8TMT 8MRT8N 1/2 1/2 2.719 1.422 1.297 .906 .859 .750 .406 1.016 7/8 13/16

10-DTMT-8 1010-3TMT 10MRT8N 5/8 1/2 2.875 1.500 1.375 .969 .859 .750 .469 1.109 1 15/16

12-DTMT-12 1210-3TMT 12MRT12N 3/4 3/4 3.016 1.578 1.453 .969 .859 .750 .625 1.172 1-1/8 1-1/16

14-DTMT-12 1410-3-12TMT 14MRT12N 7/8 3/4 3.266 1.766 1.500 1.031 .875 .750 .750 1.359 1-1/4 1-5/16

16-DTMT-12 1610-3-12TMT 16MRT12N 1 3/4 3.609 1.937 1.656 1.234 1.047 .750 .875 1.453 1-1/2 1-5/16

16-DTMT-16 1610-3-16TMT 16MRT16N 1 1 3.781 1.937 1.844 1.234 1.047 .937 .875 1.453 1-1/2 1-5/16

Male Run Tee


DTTFDTTFDTTF

T P A A1 A2 B C E L NH WPART TUBE PIPE END THRU NUT WRENCH


2-DTTF-2 200-3TTF 2FBT2N 1/8 1/8 1.937 .969 .750 .500 .609 .094 .719 7/16 1/2

3-DTTF-2 300-3-2TTF 3FBT2N 3/16 1/8 2.016 1.016 .750 .547 .641 .125 .750 1/2 1/2

4-DTTF-2 400-3TTF 4FBT2N 1/4 1/8 2.125 1.062 .750 .609 .703 .187 .766 9/16 1/2

4-DTTF-4 400-3-4TTF 4FBT4N 1/4 1/4 2.344 1.172 .875 .609 .703 .187 .875 9/16 11/16

5-DTTF-2 500-3-2TTF 5FBT2N 5/16 1/8 2.344 1.172 .750 .641 .734 .250 .875 5/8 5/8

6-DTTF-4 600-3TTF 6FBT4N 3/8 1/4 2.469 1.234 .875 .656 .766 .281 .937 11/16 11/16

8-DTTF-4 810-3-4TTF 8FBT4N 1/2 1/4 2.844 1.422 .875 .906 .859 .406 1.016 7/8 13/16

8-DTTF-6 810-3TTF 8FBT6N 1/2 3/8 2.844 1.422 .875 .906 .859 .406 1.016 7/8 13/16

8-DTTF-8 810-3-8TTF 8FBT8N 1/2 1/2 3.062 1.531 1.125 .906 .859 .406 1.125 7/8 1

10-DTTF-8 1010-3TTF 10FBT8N 5/8 1/2 3.062 1.531 1.125 .969 .859 .500 1.125 1 1

12-DTTF-12 1210-3TTF 12FBT12N 3/4 3/4 3.516 1.766 1.250 .969 .859 .625 1.359 1-1/8 1-3/8

14-DTTF-12 1410-3-12TTF 14FBT12N 7/8 3/4 3.016 1.766 1.250 1.031 .875 .750 1.359 1-1/4 1-5/16

16-DTTF-12 1610-3-12TTF 16FBT12N 1 3/4 3.859 1.937 1.250 1.234 1.047 .875 1.453 1-1/2 1-3/8

16-DTTF-16 1610-3TTF 16FBT16N 1 1 3.969 1.984 1.500 1.234 1.047 .875 1.500 1-1/2 1-11/16

Female Branch Tee



DTTMDTTMDTTM

T P A A1 A2 B C D E1 L NH WPART TUBE PIPE END THRU NUT WRENCH


2-DTTM-2 200-3TTM 2MBT2N 1/8 1/8 1.859 .937 .703 .500 .609 .375 .094 .672 7/16 7/16

2-DTTM-4 200-3-4TTM 2MBT4N 1/8 1/4 1.937 .969 .922 .500 .609 .562 .094 .719 7/16 1/2

3-DTTM-2 300-3TTM 3MBT2N 3/16 1/8 1.922 .969 .703 .547 .625 .375 .125 .703 1/2 7/16

4-DTTM-2 400-3TTM 4MBT2N 1/4 1/8 2.125 1.062 .734 .609 .703 .375 .187 .765 9/16 1/2

4-DTTM-4 400-3-4TTM 4MBT4N 1/4 1/4 2.125 1.062 .922 .609 .703 .562 .187 .765 9/16 1/2

5-DTTM-2 500-3TTM 5MBT2N 5/16 1/8 2.344 1.172 .828 .641 .725 .375 .187 .875 5/8 5/8

6-DTTM-4 600-3TTM 6MBT4N 3/8 1/4 2.406 1.203 1.000 .656 .765 .562 .281 .906 11/16 5/8

6-DTTM-6 600-3-6TTM 6MBT6N 3/8 3/8 2.625 1.312 1.109 .656 .765 .562 .281 1.016 11/16 13/16

8-DTTM-6 810-3TTM 8MBT6N 1/2 3/8 2.844 1.422 1.109 .906 .859 .562 .375 1.016 7/8 13/16

8-DTTM-8 810-3-8TTM 8MBT8N 1/2 1/2 2.844 1.422 1.297 .906 .859 .750 .406 1.016 7/8 13/16

10-DTTM-8 1010-3TTM 10MBT8N 5/8 1/2 3.062 1.531 1.406 .969 .859 .750 .469 1.125 1 1

12-DTTM-12 1210-3TTM 12MBT12N 3/4 3/4 3.141 1.172 1.453 .969 .859 .750 .625 1.172 1-1/8 1-1/16

14-DTTM-12 1410-3-12TTM 14MBT12N 7/8 3/4 3.516 1.766 1.500 1.031 .875 .750 .750 1.359 1-1/4 1-3/8

16-DTTM-12 1610-3-12TTM 16MBT12N 1 3/4 3.875 1.937 1.656 1.234 1.047 .750 .875 1.453 1-1/2 1-1/2

16-DTTM-16 1610-3-16TTM 16MBT16N 1 1 3.875 1.937 1.656 1.234 1.047 .937 .875 1.453 1-1/2 1-5/16

Male Branch Tee



DTTTDTTTDTTT

T A A1 B C E L NH WPART TUBE THRU NUT WRENCH


1-DTTT-1 100-3 1ET1 1/16 1.406 .703 .344 .437 .052 .547 5/16 3/8

2-DTTT-2 200-3 2ET2 1/8 1.766 .875 .500 .609 .094 .625 7/16 3/8

3-DTTT-3 300-3 3ET3 3/16 1.922 .969 .547 .625 .125 .703 1/2 7/16

4-DTTT-4 400-3 4ET4 1/4 2.125 1.062 .609 .703 .187 .766 9/16 1/2

5-DTTT-5 500-3 5ET5 5/16 2.344 1.172 .641 .734 .250 .875 5/8 5/8

6-DTTT-6 600-3 6ET6 3/8 2.406 1.203 .656 .766 .281 .906 11/16 5/8

8-DTTT-8 810-3 8ET8 1/2 2.844 1.422 .906 .859 .406 1.016 7/8 13/16

10-DTTT-10 1010-3 10ET10 5/8 3.062 1.531 .969 .859 .500 1.125 1 1

12-DTTT-12 1210-3 12ET12 3/4 3.141 1.578 .969 .859 .625 1.172 1-1/8 1-1/16

14-DTTT-14 1410-3 14ET14 7/8 3.516 1.766 1.016 .859 .718 1.359 1-1/4 1-3/8

16-DTTT-16 1610-3 16ET16 1 3.859 1.937 1.234 1.047 .875 1.453 1-1/2 1-3/8

Union Tee



®


*All tube ends are typical.

DCRDCRDCR

T A A1 B C E L NH WPART TUBE THRU NUT WRENCH


2-DCR 200-4 2ECR2 1/8 1.766 .875 .500 .609 .094 .625 7/16 3/8

4-DCR 400-4 4ECR4 1/4 2.125 1.062 .609 .703 .187 .766 9/16 1/2

5-DCR 500-4 5ECR5 5/16 2.344 1.172 .641 .734 .250 .875 5/8 5/8

6-DCR 600-4 6ECR6 3/8 2.406 1.203 .656 .766 .281 .906 11/16 5/8

8-DCR 810-4 8ECR8 1/2 2.844 1.422 .906 .859 .406 1.016 7/8 13/16

12-DCR 1210-4 12ECR12 3/4 3.016 1.516 .969 .859 .625 1.109 1-1/8 1-1/16

16-DCR 1610-4 16ECR16 1 3.687 1.844 1.234 1.047 .875 1.359 1-1/2 1-3/8

Union Cross


DBIDBIDBI

PART INTERCHANGES T W A E F LNUMBER WITH TUBE O.D. REF. THRU HOLE TUBE I.D.

3-DBI-030 305-2 3/16 .031 .566 .062 1/8 .518

4-DBI-022 405-2 1/4 .022 .566 .141 13/64 .518

4-DBI-031 405-3 1/4 .031 .566 .125 3/16 .518

4-DBI-040 405-170 1/4 .040 .566 .109 11/64 .518

4-DBI-062 1/4 .062 .566 .062 1/8 .518

5-DBI-031 505-4 5/16 .031 .566 .187 1/4 .518

5-DBI-062 505-3 5/16 .062 .566 .125 3/16 .518

5-DBI-094 505-2 5/16 .094 .566 .062 1/8 .518

5-DBI-103 5/16 .103 .566 .045 7/64 .518

6-DBI-049 3/8 .049 .566 .218 9/32 .518

6-DBI-062 605-4 3/8 .062 .566 .187 1/4 .518

6-DBI-094 605-3 3/8 .094 .566 .125 3/16 .518

6-DBI-159 3/8 .159 .566 .032 1/16 .518

8-DBI-035 1/2 .035 .750 .375 7/16 .702

8-DBI-049 1/2 .049 .750 .344 13/32 .702

8-DBI-062 815-6 1/2 .062 .750 .312 3/8 .702

8-DBI-125 815-4 1/2 .125 .750 .187 1/4 .702

10-DBI-049 5/8 .049 .750 .469 17/32 .702

10-DBI-062 1015-8 5/8 .062 .750 .437 1/2 .702

10-DBI-125 1015-6 5/8 .125 .750 .312 3/8 .702

10-DBI-187 5/8 .187 .750 .187 1/4 .702

12-DBI-049 3/4 .049 .750 .562 21/32 .702

12-DBI-062 1215-10 3/4 .062 .750 .562 5/8 .702

12-DBI-125 1215-8 3/4 .125 .750 .437 1/2 .702

14-DBI-049 7/8 .049 1.031 .687 25/32 .938

14-DBI-062 7/8 .062 1.031 .687 3/4 .938

14-DBI-125 7/8 .125 1.031 .562 5/8 .938

16-DBI-062 1615-14 1 .062 1.031 .812 7/8 .938

16-DBI-125 1615-12 1 .125 1.031 .687 3/4 .938

Barbed Insert




DPIDPIDPI

PART T W A E F LNUMBER INTERCHANGES WITH TUBE O.D. REF. THRU HOLE TUBE I.D.

3-DPI-030 3 TIZ (.125) 3/16 .031 .566 .062 1/8 .518

4-DPI-022 1/4 .022 .566 .140 13/64 .518

4-DPI-031 4 TIZ (.188) 1/4 .031 .566 .125 3/16 .518

4-DPI-040 4 TIZ (.170) 1/4 .040 .566 .109 11/64 .518

5-DPI-062 5 TIZ (.188) 5/16 .062 .566 .125 3/16 .518

5-DPI-094 5 TIZ (.125) 5/16 .094 .566 .062 1/8 .518

6-DPI-049 3/8 .049 .566 .218 9/32 .518

6-DPI-062 6 TIZ (.250) 3/8 .062 .566 .187 1/4 .518

6-DPI-094 6 TIZ (.188) 3/8 .094 .566 .125 3/16 .518

8-DPI-035 1/2 .035 .750 .375 7/16 .702

8-DPI-049 1/2 .049 .750 .344 13/32 .702

8-DPI-062 8 TIZ (.375) 1/2 .062 .750 .312 3/8 .702

8-DPI-125 8 TIZ (.250) 1/2 .125 .750 .187 1/4 .702

10-DPI-049 5/8 .049 .750 .469 17/32 .702

10-DPI-062 10 TIZ (.500) 5/8 .062 .750 .437 1/2 .702

10-DPI-125 10 TIZ (.375) 5/8 .125 .750 .312 3/8 .702

12-DPI-049 3/4 .049 .750 .562 21/32 .702

12-DPI-062 12 TIZ (.625) 3/4 .062 .750 .562 5/8 .702

12-DPI-125 12 TIZ (.500) 3/4 .125 .750 .437 1/2 .702

14-DPI-049 7/8 .049 1.000 .687 25/32 .952

14-DPI-062 7/8 .062 1.000 .687 3/4 .952

14-DPI-125 7/8 .125 1.000 .562 5/8 .952

16-DPI-050 1 .050 1.000 .843 57/64 .952

16-DPI-062 16 TIZ (.875) 1 .062 1.000 .812 7/8 .952

16-DPI-125 16 TIZ (.750) 1 .125 1.000 .687 3/4 .952

Plane Insert


DN/DKNDN/DKNDN/DKN

PART T A NHNUMBER INTERCHANGES WITH TUBE O.D. NUT HEX

DN-1 102-1 1NU1 1/16 .312 5/16

DN-2 202-1 2NU2 1/8 .469 7/16

DN-3 302-1 3NU3 3/16 .469 1/2

DN-4 402-1 4NU4 1/4 .500 9/16

DN-5 502-1 5NU5 5/16 .531 5/8

DN-6 602-1 6NU6 3/8 .562 11/16

DN-8 812-1 8NU8 1/2 .687 7/8

DN-10 1012-1 10NU10 5/8 .687 1

DN-12 1212-1 12NU12 3/4 .687 1-1/8

DN-14 1412-1 14NU14 7/8 .687 1-1/4

DN-16 1612-1 16NU16 1 .812 1-1/2

Nut

Knurled Nut



The knurled nut is used with fittings where applications of a finger tight assembly is acceptable. Common applications include, but are not limited to, low pressure laboratory use on plastic tubing.

Knurled nuts are available in the same sizes as shown for CBC-Lok® nuts (DN). The knurled nut part descriptor is DKN. For example, the part number for a 1/2" knurled nut is SS-DKN-8.

PART QUANTITYNUMBER INTERCHANGES WITH TUBE O.D. (per arbor)

DCSET-4-10 400 Sets-10 4-ALOK-SS-SET 1/4

DCSET-6-10 600 Sets-10 6-ALOK-SS-SET 3/8 10



DCSET-16-10 1610 Sets-10 16-ALOK-SS-SET 1

Collet Sets contain 10 collets on an arbor.1/2" Collet Set part number: SS-DCSET-8-10

Nut/Collet Sets contain 5 nuts & 5 collets on an arbor. 1/2" Nut/Collet Set part number: SS-DNCSET-8-5

PART QUANTITYNUMBER TUBE O.D. (per arbor)

DNCSET-4-5 1/4

DNCSET-6-5 3/8 5

DNCSET-8-5 1/2

DNCSET-12-5 3/4

DNCSET-16-5 1

COLLETSDFC/DRC/DCSET/DNCSETDFC/DRC/DCSET/DNCSET

Front Collet(Ferrule)

Rear Collet(Ferrule)


PART TNUMBER INTERCHANGES WITH TUBE O.D.

DFC-1 103-1 1FF1 1/16DFC-2 203-1 2FF2 1/8DFC-3 303-1 3FF3 3/16DFC-4 403-1 4FF4 1/4DFC-5 503-1 5FF5 5/16DFC-6 603-1 6FF6 3/8DFC-8 813-1 8FF8 1/2DFC-10 1013-1 10FF10 5/8DFC-12 1213-1 12FF12 3/4DFC-14 1413-1 14FF14 7/8DFC-16 1613-1 16FF16 1

PART TNUMBER INTERCHANGES WITH TUBE O.D.

DRC-1 104-1 1BF1 1/16DRC-2 204-1 2BF2 1/8DRC-3 304-1 3BF3 3/16DRC-4 404-1 4BF4 1/4DRC-5 504-1 5BF5 5/16DRC-6 604-1 6BF6 3/8DRC-8 814-1 8BF8 1/2DRC-10 1014-1 10BF10 5/8DRC-12 1214-1 12BF12 3/4DRC-14 1414-1 14BF14 7/8DRC-16 1614-1 16BF16 1


Collet sets and Nut/Collet sets make for easy storage and handling of nuts and collets. CBC-Lok® component partsare precision made and should be handled with care. The components can be ordered on an arbor, which aids incareful handling and prevents them from coming off. Pinch the end of the arbor to release the components.

Component Replacement Parts


Nut/Collet Sets

Collet Sets

The Instrument Tee may be ordered with any standard tube or pipe size. When ordering, specifysizes in the following order:1. Tube Size O.D2. Female Pipe Size3. Male Pipe SizeExample: 1/2" tube, 3/8" female pipe, 1/4" male pipe.

SS-8-DTFM-6-4

A Thermocouple Connector can be furnished alreadybored through for an additional charge. When ordering:1. Select required size male connector. See

pages 14 and 15 for a listing of available Male Connectors.

2. Add the letters “BT” to designate borethrough. Example: 4-DMC-2-BT

The Heat Exchanger Tee may be ordered in anystandard tube size. The process tube is boredthrough. When ordering, specify sizes in the followingorder:1. Jacket Tube O.D2. Process Tube O.D. followed by “BT” for bore

through designation3. Branch Tube O.D.Example: 1/2" tube, 1/4" tube bored through, 1/2"

tube. SS-8-DTTT-4BT-8

Tylube™ is an anti-gall compound to be used on stainless steel, steel andnickel based alloys. Temperature range to 500°F. Not recommended for plastic and aluminum products.Tylube™ is made from distilled water with inert ingredients and contains no silicones, heavy metals, chlorine or sulfur. For a complete list of ingredients request an MSDS to be sure of its compatibility with yourinstallation. Available in 8 oz.plastic bottles.

Instrument Tee

Thermocouple Bore Through

Heat Exchanger Tee

Tylube™ Thread Lubricant

TYLOKTYLOKTYLOK


TYLOKTYLOKTYLOK


CBC-Lok® Tube Fittings come completely assembled and ready for use, no dissassemby required. Although thereare some general guide lines to follow no special preparation of the tubing is necessary, reference page 44. Inoverhead applications Tylok recommends using a Pre-Set Tool, see page 47.

Tighten nut with wrench an additional number of turnsindicated above, while holding the fitting body with asecond wrench.

CBC-Lok® Installation Instructions

Simply insert the tubing into the assembly makingsure the tubing seats firmly against the shoulder ofthe body and the nut is finger tight.

Size Tighten # Turn(s)1 1/16"2 1/8" 3/43 3/16"4 1/4"5 5/16"6 3/8"8 1/2" 1-1/410 5/8"12 3/4"14 7/8"16 1"

To Remove Tube and Re-Connect Tube FittingMark the location of the nut with reference to the body before disassembly. For reassembly, re-insert the tubinginto the body until it is seated. With proper size wrench, retighten nut to original location by realigning previousmarks. A noticeable amount of torque will develop when the nut is turned to original position. Next, rotate the nutslightly past original position to fully re-set the seal.

Mark the location of the nut with reference to the body. Back off the nut until it is clear of the body and removethe tubing from the fitting.

Size #1 Thru #3 Size #4 Thru #16(1/16" – 3/16") (1/4" – 1")

Finger Tight Plus Finger Tight Plus3/4 Turn 1-1/4 Turns

CBC-Lok® Tubing Selection & Preparation

75,000 PSI Tensile

Stainless SteelTube Tube Wall Thickness (inches)SizeO.D. .028 .035 .049 .065 .083 .095 .109 .120

1/8" 8400 106003/16" 5500 7000 101001/4" 4000 5100 7500 101005/16" 4100 5900 80003/8" 3300 4800 66001/2" 2600 3800 5100 67005/8" 3000 4000 5200 61003/4" 2500 3300 4300 5000 58007/8" 2100 2800 3600 4200 49001" 2400 3200 3700 4200 4700

47,000 PSI Tensile

Carbon SteelTube Tube Wall Thickness (inches)SizeO.D. .028 .035 .049 .065 .083 .095 .109 .120

1/8" 8100 102003/16" 5200 6700 96001/4" 3800 4900 7100 96005/16" 3800 5500 76003/8" 3100 4500 62001/2" 2300 3300 4500 60005/8" 2600 3500 4600 53503/4" 2200 2900 3800 4400 51007/8" 1800 2500 3200 3700 43001" 2100 2800 3200 3700 4200

SUGGESTED ALLOWABLE WORKINGPRESSURE TABLES (psig)

It is the responsibility of the Engineer to refer to thetechnical pages in this catalog to ensure selection ofthe proper tubing material, tubing compatibility withthe fitting, media and tubing wall thickness. Followingthe stated recommendations will ensure a safe application, free of leaks. The entire system must be considered when selecting the tube.

Note: For welded and drawn tubing, a derating factor must be utilized.For double welded tube, multiply the above pressure rating by .85;and for single welded tube by .80 (ANSI B 31, Table A-1B).

30,000 PSI Tensile

CopperTube Tube Wall Thickness (inches)SizeO.D. .028 .035 .049 .065 .083 .095 .109 .120

1/8" 2700 36003/16" 1800 2300 35001/4" 1300 1700 2500 36005/16" 1300 2000 28003/8" 1100 1600 23001/2" 800 1200 1700 22005/8" 900 1300 1700 19003/4" 800 1000 1400 1600 19007/8" 600 900 1100 1300 16001" 600 800 1000 1200 1400 1500

Proper selection of tubing is key to the performance ofthe fitting. When selecting the proper wall thickness andmaterial, all tubing should be compatible with theprocess fluid, temperature, application, flow and system pressure.

For proper sealing it is recommended that the tubingand fitting be of like material to allow for positive sealing(i.e., stainless on stainless, brass on copper, steel onsteel). Galvanic corrosion could occur if the tubing andfitting are not of like material, with the exception of abrass fitting on copper tubing.

When using stainless steel tubing, Tylok recommendsusing Type 304 or 316 fully annealed, seamless or welded redrawn meeting ASTM-A-213, ASTM-A-269 orequivalent, with a suggested maximum hardness of 80 Rb.

For copper tubing, Tylok suggests using soft annealed,seamless tubing per ASTM-B75 or equivalent. Copperwater tube type K or L, soft annealed (Temper O) perASTM-B88 can also be used.

When using carbon steel, all tubing should be fullyannealed and conform to ASTM-A-179, or equivalent,with a maximum hardness of 72 Rb.

In general, all tubing should be free of nicks, scratches,imperfections of any kind and be suitable for bending.Out of round tubing that does not easily go throughfitting components should not be used. It isrecommended that the charts be used for tube selection.Ideally, the tube end should be cut square so that whenit bottoms out inside the fitting an extra seal is provided.Avoid installing contaminated tubing into your system.For elevated temperatures see page 46.

CBC-Lok® Tube Fittings swage the tubing to achieve itsseals. Thin wall tubing (wall thicknesses with workingpressures highlited in reverse text, in the charts) is notrecommended for Gas Service. For Gas Service seepage 45.

When using tubing of a thinner or thicker wall thanshown, it is always recommended that you consult withyour local Distributor or contact Tylok Internationaldirectly if there is any doubt selecting tubing.

Values in reverse text are not recommended for Gas Service.

Note: Tables, calculated to the right, are suggested maximum workingpressure ratings, in accordance with ASME B31.3, but should be usedfor reference only. Tylok International, Inc., is not responsible for itsaccuracy nor designs using these figures. All compatible Tylok fittingswill withstand pressures above those listed for maximum tubing working pressures.

TYLOKTYLOKTYLOK


TYLOKTYLOKTYLOK


Gap Gages can be purchased to ensure the Installerand Inspector that the nut has been properly tightened. Available upon request.

When fitting is properly tightened, gap gage shouldnot fit between nut and shoulder of body.

• Never connect, disconnect or remake a fitting with pressure in the system

• Make sure all fittings are properly installed, referenceInstallation Instructions - page 43, before pressurizingthe system

• Tubing material should be softer than fitting material

• Tylok recommends using Tylok replacement parts

• Although the fittings will hold to the pressure ratingof the tubing, it is not recommended to go beyondthis rating. Elongation could occur in the tubing,shrinking the wall thickness and causing potentialharm to anyone in the area

• Always use proper thread lubricants and sealantson tapered pipe threads

• If process fluids are toxic and/or hazardous, exerciseextra caution

• Never bleed a system by loosening a fitting

• For proper sealing it is recommended that the tubing and fitting be of like material

All components are manufactured and inspected tomeet strict quality control standards in each phase ofproduction. All employees are thoroughly trained tofollow rigid procedures, in accordance with the ISO9001:2000 Quality Standard, to ensure a quality product from the start of each job through completion.At Tylok our primary concern is quality, reliability andservice to our customers.

Gap Gages

Safety Guidelines

Quality Control

Extra care must be taken when tubing is used in gasservice applications. Small gas molecules easilyescape through minute leak paths, therefore, the tubingmust be free of nicks, scratches and imperfections ofany kind. In particular, when using large diameter tubingthe possibility of surface defects is increased due togreater surface area. It is strongly recommended thatthe heavier wall thick nesses be selected. Penetrationof the ferrules on thin wall tubing or soft material maynot offer enough radial resistance for sealing. In suchcases, Tylok recommends using a Plane Insert (Partdescriptor DPI, page 39). In the tables on page 44note the suggested allowable working pressure for gas service.

CBC-Lok® Tube Fittings with weld ends offer the same positive sealing as all other Tylok fittings.Welding could deform the assembly, making pull upsor disassembly difficult. Some precautions should betaken...

• Remove the nut and ferrules from the fitting

• It is important that the fitting threads and sealingsurfaces be protected from weld splatter

• A heat sink should be used to dissipate heat

• Ensure alignment by tack welding symmetrically

• Once welded, remove the weld splatter protectionand reassemble nut and ferrules on fitting

Tylok offers a leak detector, Tyspy, for use in allsealing applications. Tyspy meets standard MIL-L-25567D, Sect. 4.4.9 for use on oxygen systems.Availiable in 1 pt. spray bottles. Specify number ofbottles needed when ordering. Part Number: TYSPY

• All temperature formula: -55°F to 200°F

• Ultra-sensitive

• Long-lasting bubbles

• Available in spray bottle

• Fluorescent for improved visibility

• Safe for oxygen systems

• Non-corrosive, non-toxic

Part Number Tube Size Part Number Tube Size#1-DGG 1/16" #8-DGG 1/2"#2-DGG 1/8" #10-DGG 5/8"#3-DGG 3/16" #12-DGG 3/4"#4-DGG 1/4" #14-DGG 7/8"#5-DGG 5/16" #16-DGG 1"#6-DGG 3/8"

Gas Service

Precautions for Weld Ends

Tyspy Leak Detector


Tylok Pipe Fittings are manufactured from materials meeting applicable ASTM or ASME specifications, with pipethreads which meet or exceed ANSI B1.20.1 requirements. Strict quality control procedures are followedthroughout production. All parts are individually inspected to provide the finest possible product.

Materials: Brass n 316 Stainless Steel n Steel

Suggested Maximum Operating Pressures for Male Pipe Threads

Suggested Maximum Operating Pressures for Female Pipe Threads

These charts are to be used as a guide only and are based on normal wall thicknesses, used for the various sizes. These ratings may vary widely from effectssuch as the proper use of sealants, size of stock, temperature, corrosion factors, etc. Therefore, Tylok International, Inc., assumes no responsibility for its accuracyin any individual design.

Pipe Thread Specifications

Temperature Ratings

MNPT 316 Stainless Steel Brass SteelSize PSI Rating PSI Rating PSI Rating1/16" 10,100 5,700 10,5001/8" 9,200 5,300 9,8001/4" 7,500 4,100 8,0003/8" 7,250 4,000 7,7001/2" 6,900 3,900 7,3003/4" 6,600 3,700 7,0001" 5,000 2,700 5,000

FNPT 316 Stainless Steel Brass SteelSize PSI Rating PSI Rating PSI Rating1/16" 6,200 3,500 6,8001/8" 6,000 3,400 6,6001/4" 6,100 3,300 6,5003/8" 5,000 2,700 5,4001/2" 4,700 2,500 4,8003/4" 4,300 2,400 4,6001" 4,100 2,300 4,500

Tylok Instrumentation Fittings are rated at the following temperatures:

316 Stainless -325°F to 1200°F Brass -40°F to 400°F Steel -65°F to 400°F(-198°C to 648°C) (-40°C to 204°C) (-54°C to 204°C)

Note: Consideration should be given to maximum temperature ratings if fittings and/or tubing are coated or plated.

The following table lists derating factors that must be considered in applications above that of ambient temperatures.

ExampleType 316 Stainless Steel 1/4" O.D. x .049" wall at800°F is…

7,500 PSI x .80 = 6,000 PSI

Therefore, the suggested allowable workingpressure for 316 Stainless Steel - 1/4" O.D. with.049" tube wall - at 800°F is 6,000 PSI.

These charts are to be used as a guide only and are based on normal wallthicknesses, used for the various sizes. These ratings may vary widely fromeffects such as the proper use of sealants, size of stock, temperature,corrosion factors, etc. Therefore, Tylok International, Inc., assumes noresponsibility for its accuracy in any individual design.

Tube Pressure Derating Factors at Elevated Temperatures

TYLOKTYLOKTYLOK


Temperatures Multiplier Factors304 316 Carbon

°F °C SS SS Copper Steel200 93 1.00 1.00 .80 .95400 204 .94 .97 .50 .86600 315 .82 .85 .77800 427 .76 .80 .59

1000 538 .69 .771200 649 .30 .37

TYLOKTYLOKTYLOK


CBC-Lok® Tube Fittings are completely heat code traceable back to the original mill heat from which it was made.Starting with the original billet, the mill creates a certificate which completely describes the chemical and physicalmakeup. For any one of the four components (body, front ferrule, rear ferrule, nut) the material certifications can beprovided when calling Tylok and giving the heat code stamp marked on the part itself, along with the part number.

Heat Traceability

Raw Material Specifications

Tylok Pre-Setting Tool

Place Pre-Setting Tool in a vice and tighten nut specified number of turns.

Back nut off of Pre-Setting Tool. Notice the ferrules have swaged into the tubing. Now take tubing to installation area.

Part Number Tube Size

#1-DPST 1/16"#2-DPST 1/8"#3-DPST 3/16"#4-DPST 1/4"#5-DPST 5/16"#6-DPST 3/8"#8-DPST 1/2"

#10-DPST 5/8"#12-DPST 3/4"#14-DPST 7/8"#16-DPST 1"

Fitting Bar *Tubing Maximum SpecificationMaterial Stock Forging Specification Hardness (Tubing)

ASTM-B16 Alloy 360 ASTM-B75 60 Max.Brass ASTM-B453 Alloy 345 ASTM-B124 Alloy 377 Copper Rockwell 15T

(Temper O)

StainlessASTM-A276

ASME-SA-182 ASTM-A213Steel

ASME-SA-479Type 316-SS ASTM-A269

90 RbType 316-SS

Steel ASTM-A108 ASTM-A179 72 Rb

The CBC-Lok® product line offers a Pre-Setting Toolwhen fittings need to be installed in hard to reachplaces. The Pre-Setting Tool is designed to be usedin any tabletop vice. After tightening the nut thespecified number of turns, as stated in the includedinstallation instructions, loosen the nut from the Pre-Setting Tool. Once the ferrules have swaged into thetubing surface, the assembly is ready for installation.

When ordering the CBC-Lok® Pre-Set Tool, referencethe part number in the chart. The Pre-Set Tool ishardened for maximum durability. The Pre-Set Toolcan be used repeatedly to set the ferrules onto thetubing for easy installation.

*Reference Tubing Selection & Preparation, page 44.

For pre-cutting tubing to length, the following chart shows the additional length inside the fitting assembly.

Tube Insertion Chart

Tube Size T Tube O.D. B Dimension

#1 1/16 .34#2 1/8 .51#3 3/16 .54#4 1/4 .60#5 5/16 .64#6 3/8 .67#8 1/2 .90#10 5/8 .96#12 3/4 .96#14 7/8 1.03#16 1.0 1.24

*NOTE: All Dimensions Subject to Change.

Tubing–General Applications

CBC-Lok® Tube Fittings are designed to perform in a variety of applications that demand high performance. The CBC-Lok® product line has been engineered to provide optimal performance, however tubing should always be considered as an important factor in the design stages of any system. Below is a table that describes somegeneral uses for different types of materials. The table is provided as a reference to the Engineer in the designprocess.

Tylok suggests the use of seamless, fully annealed tubing. Welded tubing may be used with Tylok fittings. However,due to the manufacturing of welded tubing, variables may be encountered. The media flowing through the tubingmust be compatible with the tubing itself. It is always a good rule to use like tubing material on like fitting material. If this format is not followed, the ferrules may have difficulty penetrating the tubing causing an adverse affect on thesealing ability. In addition, dissimilar materials in contact may be sensitive to galvanic corrosion. Tylok recommendsordering tubing material to meet ASTM specifications to ensure that it will be dimensionally, physically and chemicallywithin precise limits (see Raw Material Specifications chart - page 47).

Tube Insertion DepthFinger Tight

Tubing RecommendedMaterial General Applications Temperature Range

Carbon Steel Air Lines, High Pressure, High Temperature, -20°F to 400°F*Oil, Air, Specialty Chemicals, Hydraulic Gases

Copper Low Temperature, Low Pressure Water, Oil, -40°F to 400°FAir, Pneumatic Controls, Lube Lines

Stainless Steel High Pressure, High Temperature, Nitrogen, -20°F to 1000°FHelium, Flammable Gases, Hydraulic, Gases,generally corrosive media

TYLOKTYLOKTYLOK


*Based on 400°F maximum.

TYLOKTYLOKTYLOK


NoticeIn designing a system incorporating tube fittings and valves, it is the designer’s or user’s obligation and responsibility to determine the appropriate fittings and valves to be used foreach application, and to insure proper installation and maintenance.

Limited WarrantyTylok fittings and valves are warranted solely against defects in material and workmanship inthe performance of the specific functions for which they are designed, as set forth in the pub-lished specifications for a period of 12 months. Should any fitting and valve or its componentfail due to a defect in material or workmanship, Tylok will replace said fitting and valve withoutcharge upon return of the failed part and evidence of its failure being due to materials or work-manship.

The Warranty above set forth is the only warranty applicable to Tylok products, and is in lieu ofany and all other warranties either express or implied, including any warranty of merchantabilityor fitness. Tylok’s sole responsibility or liability as a result of any loss or damage due to failureshall be to replace the failed part or fitting and valve, and it shall bear no liability for any inci-dental or consequential damages to person or property.

© 2006 Tylok International, Inc.All rights reserved.Litho in U.S.A.

Our HistoryIn the mid 1940s, Cullen Crawford founded the

Crawford Fitting Company. Mr. Crawford developed and

patented the original flareless fitting (nut and two ferrule

system), for the Crawford Fitting Company. Thus, a new and

innovative industry was born making it far easier to make

tubing connections. This reduces installation time and errors.

Since his invention, End Users from all four corners of the globe

have made billions of connections. This system provides leak

proof seals and thus Mr. Crawford has been named “The founder

of the flareless fitting.”

Our MissionIt is our mission, at Tylok International, Inc., to continuously

strive for and achieve total customer satisfaction with both

our products and services.

Our GoalTylok’s aggressive goal is to establish ourselves as

an industry leader and expand our market share.

This is maintained in every department within

the organization. Our “total effort” will

guard against losing the personal touch

that makes our business enjoyable

and prosperous for all involved.

INSTRUMENTATION

TUBE FITTINGS

Tylok Standard

CBC-Lok®

CS-Lok®

PIPE FITTINGS

WELD FITTINGS

BALL VALVES

• Ty-Flo® HP Series

• Ty-Flo® 3 Piece

NEEDLE VALVES

MANIFOLDS

FLEXIBLE METAL HOSE


[email protected]

www.tylok.comCBC-Lok Tube Fittings Catalog Doc. 72305 Rev. G

Ty-Flo® 3 Piece Ball Valves are ordered as listed in this catalogby inserting the material code before the part number.Ty-Flo® 3 Piece Ball Valves can be identified through thepart number as to material, end sizes, end configuration,seat and seal type, and special options. The standard Ball& Stem are in stainless steel unless otherwise requested.

Example: A Stainless Steel, 3/4" inlet to 3/4" outlet,3 piece ball valve, with CBC-Lok Instrumentation TubeEnds, Reinforced Teflon Seats and Seals, with thefollowing option: ASME B16.34 compliant is designatedas follows...

SS - 12 - 5 TT - 12 - R R - KMaterial Inlet Size Style Description Outlet Size Seats Seals OptionsChart 1 Chart 2 Chart 3 Chart 4 Chart 2 Chart 5 Chart 6 Chart 7

HOW TO ORDERHow to OrderHow to Order

Chart 1 -MATERIALBody & Ends MaterialSS Stainless Steel

Chart 3 - STYLE5 3 Piece Ball Valve, 2 way,

bi-directional flow

Chart 4 - DESCRIPTIONCode End Description Size Range

BB Butt Weld 1/4" – 1"EE Extended Butt Weld 1/4" – 1"– IPS ButtWeld Sched. 5 (WW), Sched. 10 (XX), Sched. 40 (YY) 1/4" – 1"II Pipe Socket Weld 1/4" – 1"CC Clamp 1/4" – 4"FF Female NPT 1/4" – 4"GG Female BSPT 1/4" – 4"TT Instrumentation Tube End (CBC-Lok) 1/4" – 1"RR 150# Raised Face Flange 1/4" – 1"QQ 300# Raised Face Flange 1/4" – 1"ZZ Instrumentation Tube End (CS-Lok) 1/4" – 1"

Chart 2 - VALVE SIZEDesignator Valve Size

4 1/4"6 3/8"8 1/2"12 3/4"16 1"

Other sizes upon request.

Chart 6 - SEALSR Reinforced PTFEG GraphoilM PTFE – TFM®

B BunaV VitonP PEEK

Chart 5 - SEATST TeflonM PTFE – TFM®

R Reinforced PTFED DelrinN NovaC Teflon Cavity FilledF PTFE – TFM® Cavity FilledP PEEK

Chart 7 - OPTIONSA Electro Polish G Purge Port Female NPTB 240 Grit / 15-20 RA* I Oval HandleC 320 Grit / 9-11 RA* J Silicon FreeD Purge Port Tube End K ASME B16.34 CompliantE Purge Port Instrumentation End L Full PortF Purge Port Male NPT Oxygen Cleaning**

Teflon® and Viton® are registered trademarksof E.I. DuPont.Tri-Clamp® is a registered trademark ofTri Clover.

Due to continuous development of ourproduct range we reserve the right tochange the dimensions and informationcontained in the leaflet as required.

Doc. 72308 Rev. F

International, Inc.1061 East 260th Street • Euclid, Ohio 44132 • Tel: (216) 261-7310 • 1-800-321-0466 • Fax: (216) 261-7317

www.tylok.com • [email protected]

3 Piece Valve Actuator

A Complete Range ofExtended SocketWeld Tailpieces

TY-FLO® HP Series Ball ValvesPressure Ratings: 1,500 PSI and 5,000 PSI

CS-LOK® Tube FittingsCS-Lok® Tube Fittings are fully interchangeablewith Parker CPI®.

CBC-LOK® Tube FittingsCBC-Lok® Tube Fittings are fully interchangeablewith Swagelok® and Parker A-Lok®.

TYLOK International carries a comprehensive range of high-quality fluid components tocompliment the TY-FLO® 3 Piece Ball Valve product line. Featured below are several popularTYLOK product lines to meet your fluid control needs.

Manifold &Needle Valves


OTHER PRODUCTSOther ProductsOther Products

*Electro Polish not including Instrumentation Tube Ends.**Oxygen Cleaning & Packaging: Special cleaning and packaging is available to meet product cleanlinessrequirements of ASTM G93 Level C. Contact authorized Tylok representative for more information.

TY-FLO® 3 Piece Ball Valves

Materials of Construction (STD)PART QUANTITY DESCRIPTION STANDARD MATERIAL1 1 BODY ASTM A351 GR CF8M OR A216 WCB2 2 TAILPIECE ASTM A351 GR CF3M OR A216 WCB3 1 BALL ASTM A276 GR 316 OR CF8M4 1 STEM ASTM A276 GR 316 OR CF8M5 2 SEAT TFM (RTFE)6 1 THRUST WASHER TFM (RTFE)7 1 PACKING SET GRAPHITE8 2 BODY SEAL GRAPHITE9 1 PACKING NUT ASTM A276 GR 316 SS10 1 HANDLE NUT 304SS11 1 HANDLE ASSY 304SS12 8 BODY BOLT A193 B8(M2-SS) OR A193 B7(M2-CS)13 1 HANDLE STOP 304SS

SIZE A B B C D E F G H J K L M ISO WT. CV Torque Torque(PORT) NPTF & EXTEND DIA PATTERN LBS. RTFE PEEK

STD. SW SW IN-LBS IN-LBS1/2" RP 0.43 2.7 6.0 2.5 4.0 1.71 1.08 0.31 0.197 0.31 1.42 1/4"-20UNC 0.38 F03 1.7 10 1003/4" RP 0.57 3.0 7.0 2.6 4.0 1.83 1.24 0.31 0.197 0.31 1.42 1/4"-20UNC 0.50 F03 2.2 25 2001" RP 0.81 3.5 7.5 3.0 4.8 2.34 1.50 0.37 0.276 0.44 1.65 1/4"-20UNC 0.50 F04 3.8 42 2301-1/4" RP 0.98 3.9 8.0 3.4 5.8 2.69 1.81 0.40 0.315 0.50 1.65 1/4"-20UNC 0.50 F04 5.1 55 2501-1/2" RP 1.25 4.5 8.0 3.7 7.5 2.91 1.95 0.43 0.394 0.62 1.97 1/4"-20UNC 0.50 F05 7.1 85 3802" RP 1.50 5.0 9.0 3.9 7.5 3.15 2.26 0.35 0.394 0.62 1.97 1/4"-20UNC 0.62 F05 9.8 120 5202-1/2" RP 2.00 6.9 N/A 5.3 11.7 4.37 3.11 0.49 0.472 0.75 2.76 5/16"-18UNC N/A F07 20.8 300 660 950

1/4"-3/8" FP 0.43 2.7 N/A 2.5 4.0 1.71 1.08 0.31 0.197 0.31 1.42 1/4"-20UNC N/A F03 1.7 10 1001/2" FP 0.57 2.8 7.0 2.6 4.0 1.83 1.24 0.31 0.197 0.31 1.42 1/4"-20UNC 0.38 F03 2.2 16 2003/4" FP 0.81 3.2 7.5 3.0 4.8 2.34 1.50 0.37 0.276 0.44 1.65 1/4"-20UNC 0.50 F04 3.8 40 2301" FP 1.00 3.8 8.0 3.4 5.8 2.69 1.81 0.40 0.315 0.50 1.65 1/4"-20UNC 0.50 F04 5.1 62 2501-1/4" FP 1.25 4.3 8.0 3.7 7.5 2.91 1.95 0.43 0.394 0.62 1.97 1/4"-20UNC 0.50 F05 7.1 115 3801-1/2" FP 1.50 4.8 9.0 3.9 7.5 3.15 2.26 0.35 0.394 0.62 1.97 1/4"-20UNC 0.50 F05 9.8 140 5202" FP 2.00 5.7 10.0 5.3 11.7 4.37 3.11 0.49 0.472 0.75 2.76 5/16"-18UNC 0.62 F07 20.8 360 660 950

DIMENSIONS,WEIGHTS, CV FACTORS&MAXIMUMOPERATING TORQUE

For Orders and Information 1-800-321-0466 • Visit Us Online at www.tylok.comFor Orders and Information 1-800-321-0466 • Visit Us Online at www.tylok.com

Materials of Construction (STD)PART QUANTITY DESCRIPTION STANDARD MATERIAL1 1 BODY ASTM A351 GR CF8M2 2 TAILPIECE ASTM A351 GR CF3M3 1 BALL ASTM A276 GR 316 OR CF8M4 1 STEM ASTM A276 GR 316 OR CF8M5 2 SEAT TFM (RTFE)6 1 THRUST WASHER TFM (RTFE)7 1 PACKING SET GRAPHITE8 2 BODY SEAL GRAPHITE9 1 PACKING NUT ASTM A276 GR 316 SS10 1 HANDLE NUT 304SS11 1 HANDLE ASSY 304SS12 8 BODY BOLT A193 B8(M2-SS)13 1 HANDLE STOP 304SS


FEATURES• 3-Piece, 8-Bolt construction providessuperior high pressure performance andASME B16.34 compliance• Fire safe to API 607 4th Edition & ISO 10497• ISO 5211 4-Bolt actuator mounting pad• API 608 compliant• NACE MR01-75 Rev 2000 compliant• Standard 304SS latch lock handles• Standard ASTM A193 grade B8stainless bolts• TFM seats provide superior high temperatureperformance and chemical resistance• PEEK seats and seals available

RatingsCF8M with 316SS Trim: 1920PSIG @ 100F

250PSIG Saturated Steam Rating

D

DIMENSIONS,WEIGHTS, CV FACTORS&MAXIMUMOPERATING TORQUESIZE A B B C D E F G H J K L M ISO WT. CV Torque Torque

(PORT) NO WITH DIA BALL PATTERN LBS. RTFE PEEKNUTS NUTS PORT IN-LBS IN-LBS

1/4" 0.15 2.60 3.19 2.5 4.0 1.71 1.08 .30 0.197 0.31 1.42 1/4"-20UNC .43 F03 1.7 1.0 100 1303/8" 0.24 2.60 3.19 2.5 4.0 1.71 1.08 .30 0.197 0.31 1.42 1/4"-20UNC .43 F03 1.7 2.5 100 1301/2" 0.41 3.26 4.04 2.5 4.0 1.71 1.08 .30 0.197 0.31 1.42 1/4"-20UNC .43 F03 1.8 7.5 100 1303/4" 0.57 3.26 4.04 2.6 4.0 1.83 1.24 .30 0.197 0.31 1.42 1/4"-20UNC .57 F03 2.2 18.0 200 2501" 0.81 4.39 5.36 3.0 4.8 2.34 1.50 .37 0.276 0.40 1.65 1/4"-20UNC .81 F04 3.8 40.0 230 300

Materials of Construction (STD)PART QUANTITY DESCRIPTION STANDARD MATERIAL1 1 BODY ASTM A351 GR CF8M2 2 TAILPIECE ASTM A351 GR CF3M3 1 BALL ASTM A276 GR 316 OR CF8M4 1 STEM ASTM A276 GR 316 OR CF8M5 2 SEAT TFM (RTFE)6 1 THRUST WASHER TFM (RTFE)7 1 PACKING SET GRAPHITE8 2 BODY SEAL GRAPHITE9 1 PACKING NUT ASTM A276 GR 316 SS10 1 HANDLE NUT 304SS11 1 HANDLE ASSY 304SS12 8 BODY BOLT A193 B813 1 HANDLE STOP 304SS

FEATURES• 3-Piece, 8-Bolt construction provides superiorhigh pressure performance• Fire safe to API 607 4th Edition & ISO 10497• ISO 5211 4-Bolt actuator mounting pad• NACE MR01-75 Rev 2000 compliant• Standard 304SS latch lock handles• Standard ASTM A193 grade B8 stainless bolts• TFM seats provide superior high temperatureperformance and chemical resistance• PEEK seats and seals available• Highest working pressure ratings - 3000WOG• Minimum 3.2 to 1 hydrostatic safety factors

RatingsCF8M with 316SS Trim: 3000PSIG @ 100F

250PSIG Saturated Steam Rating

DIMENSIONS,WEIGHTS, CV FACTORS&MAXIMUMOPERATING TORQUESIZE A B B C D E F G H J K L M ISO WT. CV Torque Torque

(PORT) NO WITH DIA BALL PATTERN LBS. RTFE PEEKNUTS NUTS PORT IN-LBS IN-LBS

1/4" 0.19 2.60 3.19 2.5 4.0 1.71 1.08 .30 0.197 0.31 1.42 1/4"-20UNC .43 F03 1.7 1.2 100 1303/8" 0.28 2.60 3.19 2.5 4.0 1.71 1.08 .30 0.197 0.31 1.42 1/4"-20UNC .43 F03 1.7 3.8 100 1301/2" 0.41 3.26 4.04 2.5 4.0 1.71 1.08 .30 0.197 0.31 1.42 1/4"-20UNC .43 F03 1.8 7.5 100 1303/4" 0.57 3.26 4.04 2.6 4.0 1.83 1.24 .30 0.197 0.31 1.42 1/4"-20UNC .57 F03 2.2 18.0 200 2501" 0.81 4.39 5.36 3.0 4.8 2.34 1.50 .37 0.276 0.40 1.65 1/4"-20UNC .81 F04 3.8 40.0 230 300 0° 100° 200° 300° 400° 500°

TEMPERATURE ºF

2000

1000

50

PR

ES

SU

RE

-P

SIG

ASME B16.34 CLASS800 BODY RATING

PEEKRTFE

RatingsWCB/T316: 1973 PSIG @ 100°FCF8M/T316: 1920 PSIG @ 100°F

All Sizes: 200 PSIG WSP

FEATURES• 3-Piece, 8 Bolt Construction• ASME B16.34, Class 800 Compliant• API 608 Compliant• Fire Safe to API 607 4th Edition &ISO 10497• NACE MR01-75 Compliant• ISO 5211 4 Bolt Mounting• Standard 316SS Ball & Stem• Standard 304SS Latch Lock Handles• 1/4"-2" Full Port, 1/2"-2-1/2"Reduced Port• Extended Socket Weld Ends Available

3 PIECE BALL VALVESTY-FLO® 3 Piece Ball ValvesTY-FLO® 3 Piece Ball Valves 3 PIECE BALL VALVESTY-FLO® 3 Piece Ball ValvesTY-FLO® 3 Piece Ball Valves 3 PIECE BALL VALVESTY-FLO® 3 Piece Ball ValvesTY-FLO® 3 Piece Ball Valves

1ASME B16.34

Compliant

23000 PSIG

Rated

3ASME B16.34

Compliant

D

Ty-Flo® 3 Piece Ball Valves are ordered as listed in this catalogby inserting the material code before the part number.Ty-Flo® 3 Piece Ball Valves can be identified through thepart number as to material, end sizes, end configuration,seat and seal type, and special options. The standard Ball& Stem are in stainless steel unless otherwise requested.

Example: A Stainless Steel, 3/4" inlet to 3/4" outlet,3 piece ball valve, with CBC-Lok Instrumentation TubeEnds, Reinforced Teflon Seats and Seals, with thefollowing option: ASME B16.34 compliant is designatedas follows...

SS - 12 - 5 TT - 12 - R R - KMaterial Inlet Size Style Description Outlet Size Seats Seals OptionsChart 1 Chart 2 Chart 3 Chart 4 Chart 2 Chart 5 Chart 6 Chart 7

HOW TO ORDERHow to OrderHow to Order

Chart 1 -MATERIALBody & Ends MaterialSS Stainless Steel

Chart 3 - STYLE5 3 Piece Ball Valve, 2 way,

bi-directional flow

Chart 4 - DESCRIPTIONCode End Description Size Range

BB Butt Weld 1/4" – 1"EE Extended Butt Weld 1/4" – 1"– IPS ButtWeld Sched. 5 (WW), Sched. 10 (XX), Sched. 40 (YY) 1/4" – 1"II Pipe Socket Weld 1/4" – 1"CC Clamp 1/4" – 4"FF Female NPT 1/4" – 4"GG Female BSPT 1/4" – 4"TT Instrumentation Tube End (CBC-Lok) 1/4" – 1"RR 150# Raised Face Flange 1/4" – 1"QQ 300# Raised Face Flange 1/4" – 1"ZZ Instrumentation Tube End (CS-Lok) 1/4" – 1"

Chart 2 - VALVE SIZEDesignator Valve Size

4 1/4"6 3/8"8 1/2"12 3/4"16 1"

Other sizes upon request.

Chart 6 - SEALSR Reinforced PTFEG GraphoilM PTFE – TFM®

B BunaV VitonP PEEK

Chart 5 - SEATST TeflonM PTFE – TFM®

R Reinforced PTFED DelrinN NovaC Teflon Cavity FilledF PTFE – TFM® Cavity FilledP PEEK

Chart 7 - OPTIONSA Electro Polish G Purge Port Female NPTB 240 Grit / 15-20 RA* I Oval HandleC 320 Grit / 9-11 RA* J Silicon FreeD Purge Port Tube End K ASME B16.34 CompliantE Purge Port Instrumentation End L Full PortF Purge Port Male NPT Oxygen Cleaning**

Teflon® and Viton® are registered trademarksof E.I. DuPont.Tri-Clamp® is a registered trademark ofTri Clover.

Due to continuous development of ourproduct range we reserve the right tochange the dimensions and informationcontained in the leaflet as required.

Doc. 72308 Rev. F

International, Inc.1061 East 260th Street • Euclid, Ohio 44132 • Tel: (216) 261-7310 • 1-800-321-0466 • Fax: (216) 261-7317

www.tylok.com • [email protected]

3 Piece Valve Actuator

A Complete Range ofExtended SocketWeld Tailpieces

TY-FLO® HP Series Ball ValvesPressure Ratings: 1,500 PSI and 5,000 PSI

CS-LOK® Tube FittingsCS-Lok® Tube Fittings are fully interchangeablewith Parker CPI®.

CBC-LOK® Tube FittingsCBC-Lok® Tube Fittings are fully interchangeablewith Swagelok® and Parker A-Lok®.

TYLOK International carries a comprehensive range of high-quality fluid components tocompliment the TY-FLO® 3 Piece Ball Valve product line. Featured below are several popularTYLOK product lines to meet your fluid control needs.

Manifold &Needle Valves


OTHER PRODUCTSOther ProductsOther Products

*Electro Polish not including Instrumentation Tube Ends.**Oxygen Cleaning & Packaging: Special cleaning and packaging is available to meet product cleanlinessrequirements of ASTM G93 Level C. Contact authorized Tylok representative for more information.

TY-FLO® 3 Piece Ball Valves

Product LineOur HistoryIn the mid 1940s, Cullen Crawford founded theCrawford Fitting Company. Mr. Crawford developedand patented the original flareless fitting (nut and twoferrule system), for the Crawford Fitting Company.Thus, a new and innovative industry was born making itfar easier to make tubing connections. This reducesinstallation time and errors. Since his invention, EndUsers from all four corners of the globe have madebillions of connections. This system provides leakproof seals and thus Mr. Crawford has been named“The founder of the flareless fitting.”

Our MissionIt is our mission, at Tylok International, Inc., tocontinuously strive for and achieve total customersatisfaction with both our products and services.

Our GoalTylok’s aggressive goal is to establishourselves as an industry leader andexpand our market share. This ismaintained in every departmentwithin the organization. Our“total effort” will guard againstlosing the personal touch thatmakes our business enjoyableand prosperous forall involved.

1061 East 260th Street • Euclid, Ohio 44132

Tel: (216) 261-7310 • 1-800-321-0466 • Fax: (216) 261-7317

[email protected]

www.tylok.com

FITTINGS

PIP

E

&NEEDLE VALVES

MA

NIF

OLD

PIPE FITTINGSTylok Pipe Fittings are offered in popular configurations suchas reducing adapters, reducing bushings, pipe unions, elbows,tees, crosses, etc.

Fittings are manufactured to the same high quality standards as other TylokFittings. Each fitting is thoroughly cleaned to eliminate system contamination andfeatures an attractive surface finish to enhance the appearance of modernscientific instrumentation and equipment.

Fittings are manufactured from materials meeting applicable ASTM or ASMEspecifications, with pipe threads which meet or exceed ANSI B1.20.1 requirements.Strict quality control procedures are followed throughout production.

Pipe thread connections are very common in today’s industry. They arerelatively easy to work with because of the common sizes and dimensionsthroughout manufacturing. It is important to use a thread sealant.These products range from pipe “dopes” to teflon tape, all of whichcan be purchased through your local Tylok Distributor.

Sizes: Fractional: 1/16" – 1"

Materials: Stainless Steel, Brass and Steel.Additional materials available upon request.

MANIFOLDS AND NEEDLE VALVES2, 3 & 5 Valve Manifolds (Forged and Bar Stock), Distribution Manifolds, Double Blockand Bleed Valves, Needle Valves, Condensing Pots (Welding and Integral), Air Distributors.

Manifolds� 2, 3 & 5 Valve designs

� Available in remote or direct mount design

� Bonnets are locked to prevent accidental disengagement from body

� Standard packing Teflon or Graphoil

� Sour gas service available

� Valve tip features self-centering for sure seal every time

� 6,000 PSI standard rating, 10,000 PSI available

Needle Valves� 6,000 PSI standard rating, 10,000 PSI available

� Bar stock valves in either straight or angle pattern available

� CBC-Lok® Compression ends size range 1/8" – 1"

� FNPT, MNPT end size range 1/4" – 1-1/2"


Materials: Stainless Steel, Brass and Steel.

Line Card Doc. 72309 Rev. G

FITTINGS

TUB

E VALVES

BA

LL TY-FLO® HP SERIES BALL VALVESStandard seats are Kel-F® and standardseals are Viton. Other materials availableupon request. Operating pressure rangesup to 1,500 PSI with TFE seats, up to 5,000 PSIwith Kel-F® seats. All valves are individually tested.

Orifice Sizes: Series 4 (0.188"), Series 6 (0.250"), Series 8 (0.375")

Typical ends are offered in any combination: Instrumentation tube ends(CBC-Lok,® CS-Lok® or Tylok Standard Tube ends) and Female and Male NPT.

Sizes: Fractional: 1/16" - 1"

Materials: Stainless Steel and Brass.

CBC-LOK® TUBE FITTINGSCBC-Lok® Tube Fittingsare fully interchangeablewith Swagelok® andParker A-Lok®.It features:

� Double collet (ferrule)swaging action

� 2 Positive seal points

� Total component interchangeabilitywith competition

� Ty-Cor™ process applied torear collet (ferrule)

Typical ends include:Instrumentation Tube ends, Female andMale NPT, Butt Weld, Socket Weld,37° flare, BSPP (British Standard Pipe Parallel)and BSPT (British Standard Pipe Taper).



� Reliable, simple operationfor on-off service

� Fast acting, one quarter turnfully open to fully closed

� Corrosion resistant

� Maximum performance, straight through flowfor minimum turbulence and pressure drop

� Positive leak tight shut off, even withfluctuating pressures

� Panel mounting capabilities

TY-FLO® 3 PIECE BALL VALVESValves feature:

� 3 Piece, 8-bolt construction provides superior high pressureperformance and ASME B16.34 compliance

� Fire safe to API 607 4th Edition & ISO 10497

� ISO 5211 4-Bolt actuator mounting pad

� API 608 compliant

� NACE MR01-75 Rev 2000 compliant

� Standard 304SS latch lock handles

� Standard ASTM A193 grade B8 stainless bolts

� TFM seats provide superior high temperature performance and chemical resistance

� PEEK seats and seals available

Typical ends include: Instrumentation Tube ends (CBC-Lok & CS Lok), Femaleand Male NPT, Clamp, Butt Weld & Extended Butt Weld, Pipe Socket Weld,IPS Butt Weld Schedule 5, 10 & 40, Raised Face Flange 150# & 300#, etc.

Sizes: Fractional: 1/16" – 1". Other sizes available upon request.

Materials: Stainless Steel and Steel.

Options: Electro Polish, 240 Grit & 320 Grit, Purge Port Ends, Cleaned for Oxygen Service, OvalHandle, Silicon Free.

CS-Lok and CBC-Lok Tube Fittingsare available in all of the configurations

shown above.

CS-LOK® TUBE FITTINGSCS-Lok® Tube Fittingsare fully interchangeablewith Parker CPI®.It features:

� Single ferruleswaging action

� Total component interchangeability

� More tolerant of vibrations

� Heat Code traceable

� ASTM material construction

� Corrosion resistant 316 Stainless Steel Ferrule

Typical ends include: Instrumentation Tube ends, Female and Male NPT, ButtWeld, Socket Weld, 37° flare, BSPP (British Standard Pipe Parallel) and BSPT(British Standard Pipe Taper).



THE CREATION OF AN INDUSTRYIn the mid 1940s, Cullen Crawford founded the Crawford Fitting Company.Mr. Crawford developed and patented the original flareless fitting (nut and twoferrule system), for the Crawford Fitting Company. Thus, a new and innovativeindustry was born making it far easier to make tubing connections. This reducesinstallation time and errors. Since his invention, End Users from all four corners of theglobe have made billions of connections. This system provides leak proof seals and thusMr. Crawford has been named “The founder of the flareless fitting.”

SUPERIOR INNOVATIONWell known throughout the fitting industry, Mr. Crawford founded Tylok International, Inc. in the late1950s. Upon request, Mr. Crawford designed a fitting to hold liquid sodium. Having designed andpatented the original flareless fitting, who better to make an improved design? Mr. Crawford knew theproblems better than anyone and, as a result, he developed and patented the Tylok Standard 4 SealTube Fitting, which eliminates problems inherent in his original design.

THE PRESENTMr. Crawford’s legacy lives on through Tylok International. Manufactured in Euclid, Ohio, Tylok’sunique design eliminates common installation problems and provides unparalleled sealing. Allof Tylok’s fitting lines are proudly made in the U.S.A.

FITTING LINES

Tylok International, Inc., presently offers three fitting lines CBC-Lok (double ferrule) &CS-Lok (single ferrule) industry standard designs and the Tylok Standard 4 Seal TubeFitting, a unique and proprietary line based upon Mr. Crawford's improved design.

CBC-Lok® double ferrule tube fittings are completely interchangeable withtube fittings of Swagelok® and Parker A-Lok®.

CS-Lok® single ferrule tube fittings are completely interchangeable withtube fittings of Parker CPI®.

THE FUTUREThe Tylok Design & Development Team is continuously working on newproducts and designs. As a result, our product lines constantly grow to helpservice our Customers.

CUSTOMER CAREAt Tylok, we strive for total satisfaction of our Customers. Your inquirieswill be responded to within 24 hours. Our team features aknowledgeable staff to answer your questions quickly. We have theability to make special items for you at a reasonable price, with fastdelivery. Fast delivery is key to your success. Realizing this, delivery isconstantly being measured via our ISO 9001:2000 QualityManagement System. Our goal is to ship all products from stock tokeep you running.

At Tylok, your Total Satisfaction is our business.

Manitoba/AlbertaCanadian

Registration NumberCertificate No. OA6247.4,OC6248.4 & OA6356.42


ISO 9001:2000Certificate # 012106

Certificate No. 00-C14740-X

FITTINGSTU

BE VALVES

BA

LL TY-FLO® HP SERIES BALL VALVESStandard seats are Kel-F® and standardseals are Viton. Other materials availableupon request. Operating pressure rangesup to 1,500 PSI with TFE seats, up to 5,000 PSIwith Kel-F® seats. All valves are individually tested.


































shown above.














FITTING LINES












FITTINGS

TUB

E VALVESB

ALL TY-FLO® HP SERIES BALL VALVES

Standard seats are Kel-F® and standardseals are Viton. Other materials availableupon request. Operating pressure rangesup to 1,500 PSI with TFE seats, up to 5,000 PSIwith Kel-F® seats. All valves are individually tested.


































shown above.














FITTING LINES
















Tel: (216) 261-7310 • 1-800-321-0466 • Fax: (216) 261-7317

[email protected]

www.tylok.com

FITTINGSPIP

E

&NEEDLE VALVES

MA

NIF

OLD


























Tel: (216) 261-7310 • 1-800-321-0466 • Fax: (216) 261-7317

[email protected]

www.tylok.com

FITTINGS

PIP

E

&NEEDLE VALVES

MA

NIF

OLD






















CBC-LOK

CS-LOK

TYLOK STANDARD

THE CREATION OF AN INDUSTRYIn the mid 1940s, Cullen Crawford founded the Crawford Fitting Company. Mr. Crawford developed and patented the original flareless fitting (nut and two ferrule system), for the Crawford Fitting Company. Thus, a new and innovative industrywas born making it far easier to make tubing connections. This reduces installation timeand errors. Since his invention, End Users from all four corners of the globe have made billions of connections. This system provides leak proof seals and thus Mr. Crawford has been named “The founder of the flareless fitting.”

SUPERIOR INNOVATIONWell known throughout the fitting industry, Mr. Crawford founded Tylok International, Inc. in the late1950s. Upon request, Mr. Crawford designed a fitting to hold liquid sodium. Having designed andpatented the original flareless fitting, who better to make an improved design? Mr. Crawford knew the problems better than anyone and, as a result, he developed and patented the Tylok Standard 4 Seal Tube Fitting, which eliminates problems inherent in his original design.

THE PRESENTMr. Crawford’s legacy lives on through Tylok International. Manufactured in Euclid, Ohio, Tylok’s unique

design eliminates common installation problems and provides unparalleled sealing. All of Tylok’s fittinglines are proudly made in the U.S.A.

FITTING LINES

Tylok International, Inc., presently offers three fitting lines CBC-Lok (double ferrule) & CS-Lok (single ferrule) industry standard designs and the Tylok Standard 4 Seal Tube Fitting, a

unique and proprietary line based upon Mr. Crawford's improved design.

CBC-Lok® double ferrule tube fittings are completely interchangeable with tube fittings of Swagelok® and Parker A-Lok®.

CS-Lok® single ferrule tube fittings are completely interchangeable with tube fittings of Parker CPI®.

THE FUTUREThe Tylok Design & Development Team is continuously working on new products anddesigns. As a result, our product lines constantly grow to help service our Customers.

CUSTOMER CAREAt Tylok, we strive for total satisfaction of our Customers. Your inquiries will be responded to within 24 hours. Our team features a knowledgeable staff toanswer your questions quickly. We have the ability to make special items foryou at a reasonable price, with fast delivery. Fast delivery is key to your success. Realizing this, delivery is constantly being measured via our ISO9001:2000 Quality Management System. Our goal is to ship all productsfrom stock to keep you running.

At Tylok, your Total Satisfaction is our business.Manitoba/Alberta

CanadianRegistration NumberCertificate No. OA6247.4, OC6248.4 & OA6356.42

REGISTRATIONS & TYPE APPROVALS



1061 East 260th Street • Euclid, Ohio 44132Tel: (216) 261-7310 • 1-800-321-0466 Fax: (216) 261-7317 • [email protected]

www.tylok.com Fitting Designs Card Doc. 72313 Rev. C

617880_Fitting_Card:Layout 1 5/19/08 10:36 AM Page 1

CS-LOK® Tube Fittings

34

1

Our GoalTylok’s aggressive goal is to establish ourselves as an industry leader and expand our marketshare. This is maintained in every department within the organization. Our “total effort” willguard against losing the personal touch that makes our business enjoyable and prosperousfor all involved.

2

Our MissionIt is our mission, at Tylok International, Inc., to continuously strive for and achieve totalcustomer satisfaction with both our products and services.

This objective falls within the framework of the larger movement toward “Total Quality” which is derived of four elements:

Make our distributors andsuppliers our partners inproviding the highest qualityproducts and services

Continuous financialsuccess of the company

Total satisfactionof our customers

We accomplish this by maintaining an honest and ethical business relationship with our customers, suppliers and employees.

Create a positiveenvironment for ouremployees that fosterstheir full potential

The Tylok Philosophy

TYLOKTylokTylok


Creation of an IndustryIn the mid 1940s, Cullen Crawford founded theCrawford Fitting Company. Mr. Crawford developedand patented the original flareless fitting (nut and twoferrule system), for the Crawford Fitting Company.Thus, a new and innovative industry was born makingit far easier to make tubing connections. Thisreduces installation time and errors. Since his inven-tion, End Users from all four corners of the globehave made billions of connections. This systemprovides leak proof seals and thus Mr. Crawford hasbeen named “The founder of the flareless fitting.”

Tylok International, Inc. offers a tube fitting line,CS-Lok®, that is fully interchangeable with ParkerCPI™. Although it is always recommended to use allCS-Lok® components, intermixing CS-Lok® bodiesand/or component parts with that of other manufacturerswill not adversely affect sealing ability. CS-Lok®

Tube Fittings are made to strict quality control standardsand cannot guarantee that of other manufacturers.CS-Lok® Tube Fittings are proudly made in the U.S.A.

CS-Lok® Tube Fittings are comprised of three compo-nents: The Body, Single Ferrule (Collet) and Nut.A leak proof seal is obtained through proper ferruleaction as the ferrule is tightened onto the tubing viaaxial thrust provided by the nut. The ferrule providesthe leak proof seal, when the nut and ferrule areproperly drawn up the specified number of turns. Thestainless steel nuts have a molybdenum disulfidecoating, reducing torque and ensuring proper sealing.

Ty-Cor™ refers to the treatment which diffuses car-bon into the surface of the stainless steel, therebyincreasing the surface hardness without affecting thequality of the metal treated. In fact, when AISI 316stainless steel is treated, the corrosion resistance isequal to or better than non-treated 316 stainlesssteel. The increase in corrosion resistance to pittingand stress corrosion is very pronounced in mediawhich contain chlorides (e.g. sea water, bleach, HCl,etc.). The Ty-Cor™ process applied to the ferrule alsohelps eliminate galling and ensures proper sealing ontube end make ups.

• Single ferrule swaging action

• Total component interchangeability

• More tolerant of vibrations

• Heat Code traceable

• ASTM material construction

• Corrosion resistant 316 Stainless Steel ferrule

Tylok International, Inc. ensures all of its Distributorsare trained on the proper installation of compressionfittings, tubing selection & preparation. TylokDistributors are trained to provide the technical supportyou deserve. Additionally, our Distributors will help infinding solutions for specific applications. Contact yourlocal Tylok Distributor for further information.

QMI has registered Tylok International’s QualityManagement System to ISO 9001:2000.The quality system complies with the internationalstandard ISO 9001:2000 and its technical equivalent,ANSI/ISO/ASQ Q9001:2000. Tylok strives tocontinuously improve the effectiveness of theQuality Management System by each memberwithin the organization.

Technical Support & Training

Quality Management System

Ty-Cor™ Process

Introduction Features

Operation




SATPF SATPM SBHA SBHFP SBHMPHow To Adapter Tube Adapter Tube Bulkhead Bulkhead BulkheadOrder to Female to Male Adapter Female Pipe Male Pipe

Pipe Pipe Connector Connector

4 5 6 7 8 9

SBHU SBUANF SCAP SF PLUG SFC SMCBulkhead Bulkhead Cap Fitting Plug Female MaleUnion to AN Flare Connector Connector

Union

10 10 11 11 12 13 & 14

SMC-ORS SMC-ORT SPCU SRATT SRPC SRUO-Ring O-Ring Port Reducer Reducing Reducing

Straight Thread Pipe Thread Connector Adapter Tube Port UnionMale Conn. Male Conn. Union to Tube Connector

15 16 17 18 19 20

STBW STSW SU SUANF SELU SFETube to Butt Tube to Socket Union Tube to Union Elbow Female Elbow

Weld Weld AN FlareConnector Connector Union

21 22 23 24 25 26

HOWTO

ORDER



SME STBWE STSWE STFT STMT STTFMale Elbow Tube to Butt Tube to Female Run Male Run Female

Weld Elbow Socket Weld Tee Tee Branch TeeElbow

27 & 28 29 30 31 32 33

STTM STTT SCR SBI SPI SNMale Union Tee Union Cross Barbed Plane Nut

Branch Tee Insert Insert

34 35 36 37 38 39

SKN SC TubingKnurled Nut Single Collet Replacement Special Installation Selection &

(Ferrule) Parts Products Instructions Preparation

39 40 40 41 42 43

Gas Service/ Technical Heat Tube Insertion WarrantySafety/ Data Traceability/ Chart/ InformationQuality Mat’l Spec./ Applications

Pre-Set Tool

44 45 46 47 48

SPECIAL

PRODUCTS

COMPONENT

REPLACEMENT

PARTS

CS-LOK

®INSTALLATION

INSTRUCTIONS

CS-LOK

® TUBING

SELECTION&

PREPARATION

GASSERVICE/

SAFETY/

QUALITY

TECHNICAL

DATA

TRACEABILITY/

MATERIALSPEC./

PRE-SETTOOL

TUBEINSERTION

CHART/

APPLICATIONS

WARRANTY

INFORMATION

HOW TO ORDERHow to Order CS-LOK® Tube FittingsHow to Order CS-LOK® Tube Fittings


CS-Lok® Tube Fittings are ordered as listed in this catalog by inserting the material code before the part number.CS-Lok® Tube Fittings can be identified through the part number as to material, tube size, configuration and threadconnection. The part number describes a complete fitting assembly. The size nomenclature to describe a tee fittingis from left (1) to right (2) and down (3). Special Configurations available upon request.

Example: A Stainless Steel Female Run Tee, 3/8” Tube Size to 1/4” Female Pipe to 3/8” Tube is designated as follows.

Chart 2 - Tube O.D.Chart 1 -Material

Chart 3 - Style

Chart 4 - Description

SS Stainless SteelB BrassS Steel

S CS-Lok®

Tube or Pipe AN TubeHose OD Thread Flare Size Pipe Thread

Designator (inches) (NPT) (inches) BSPP/BSPT1 1/16 1/16-27 1/16-282 1/8 1/8-27 1/8 1/8-283 3/16 3/164 1/4 1/4-18 1/4 1/4-195 5/16 5/166 3/8 3/8-18 3/8 3/8-198 1/2 1/2-14 1/2 1/2-14

10 5/8 5/812 3/4 3/4-14 3/4 3/4-1414 7/8 7/816 1 1.0-11 1/2 1 1.0-11

SU UnionSUANF Tube to AN Flare UnionSELU Union ElbowSFE Female ElbowSME Male ElbowSTBWE Tube to Butt Weld ElbowSTSWE Tube to Socket Weld ElbowSTFT Female Run TeeSTMT Male Run TeeSTTF Female Branch TeeSTTM Male Branch TeeSTTT Union TeeSCR Union CrossSBI Barbed InsertSPI Plane InsertSN NutSKN Knurled NutSC Single Collet (Ferrule)

SATPF Adapter Tube to Female PipeSATPM Adapter Tube to Male PipeSBHA Bulkhead AdapterSBHFP Bulkhead Female Pipe ConnectorSBHMP Bulkhead Male Pipe ConnectorSBHU Bulkhead UnionSBUANF Bulkhead to AN Flare UnionSCAP CapSF PLUG Fitting PlugSFC Female ConnectorSMC Male ConnectorSMC-ORS O Ring Straight Thread Male ConnectorSMC-ORT O Ring Pipe Thread Male ConnectorSPCU Port Connector UnionSRATT Reducer Adapter Tube to TubeSRPC Reducing Port ConnectorSRU Reducing UnionSTBW Tube to Butt Weld ConnectorSTSW Tube to Socket Weld Connector

SS - 6 - S TFT - 4 1 2

Material Tube O.D. Style Description Odd End Size

Chart 1 Chart 2 Chart 3 Chart 4 Chart 23


SATPFSATPFSATPF

PART INTERCHANGES T P A E L BHNUMBER WITH TUBE PIPE END THRU HOLE BODY HEX

O.D. NPT2-SATPF-2 2-2 T2HG 1/8 1/8 1.234 .078 .562 9/16

2-SATPF-4 2-4 T2HG 1/8 1/4 1.406 .078 .562 3/4

3-SATPF-2 3-2 T2HG 3/16 1/8 1.281 .125 .609 9/16

3-SATPF-4 3-4 T2HG 3/16 1/4 1.453 .125 .609 3/4

4-SATPF-2 4-2 T2HG 1/4 1/8 1.312 .156 .640 9/16

4-SATPF-4 4-4 T2HG 1/4 1/4 1.484 .156 .640 3/4

4-SATPF-6 4-6 T2HG 1/4 3/8 1.500 .156 .640 7/8

4-SATPF-8 4-8 T2HG 1/4 1/2 1.812 .156 .640 1-1/16

5-SATPF-2 5-2 T2HG 5/16 1/8 1.390 .219 .687 9/16

5-SATPF-4 5-4 T2HG 5/16 1/4 1.516 .219 .687 3/4

6-SATPF-2 6-2 T2HG 3/8 1/8 1.359 .281 .718 9/16

6-SATPF-4 6-4 T2HG 3/8 1/4 1.547 .281 .718 3/4

6-SATPF-6 6-6 T2HG 3/8 3/8 1.594 .281 .718 7/8

6-SATPF-8 6-8 T2HG 3/8 1/2 1.843 .281 .718 1-1/16

8-SATPF-4 8-4 T2HG 1/2 1/4 1.828 .375 .984 3/4

8-SATPF-6 8-6 T2HG 1/2 3/8 1.890 .375 .984 7/8

8-SATPF-8 8-8 T2HG 1/2 1/2 2.140 .375 .984 1-1/16

10-SATPF-6 10-6 T2HG 5/8 3/8 1.937 .468 1.031 7/8

10-SATPF-8 10-8 T2HG 5/8 1/2 2.187 .468 1.031 1-1/16

12-SATPF-8 12-8 T2HG 3/4 1/2 2.187 .578 1.031 1-1/16

14-SATPF-12 14-12 T2HG 7/8 3/4 2.265 .687 1.078 1-1/4

16-SATPF-12 16-12 T2HG 1 3/4 2.484 .812 1.296 1-1/4

16-SATPF-16 16-16 T2HG 1 1 2.828 .812 1.296 1-5/8

Adapter Tube toFemale Pipe


SATPMSATPMSATPM

PART INTERCHANGES T P A D E1

L W BHNUMBER WITH TUBE PIPE END THRU BODY

O.D. NPT HOLE HEX2-SATPM-2 2-2 T2HF 1/8 1/8 1.187 .375 .078 .562 .023 7/16

2-SATPM-4 2-4 T2HF 1/8 1/4 1.406 .562 .078 .562 .023 9/16

3-SATPM-2 3-2 T2HF 3/16 1/8 1.234 .375 .125 .609 .031 7/16

3-SATPM-4 3-4 T2HF 3/16 1/4 1.453 .562 .125 .609 .031 9/16

4-SATPM-2 4-2 T2HF 1/4 1/8 1.265 .375 .156 .640 .047 7/16

4-SATPM-4 4-4 T2HF 1/4 1/4 1.484 .562 .156 .640 .047 9/16

4-SATPM-6 4-6 T2HF 1/4 3/8 1.500 .562 .156 .640 .047 11/16

4-SATPM-8 4-8 T2HF 1/4 1/2 1.718 .750 .156 .640 .047 7/8

5-SATPM-2 5-2 T2HF 5/16 1/8 1.297 .375 .219 .687 .047 7/16

5-SATPM-4 5-4 T2HF 5/16 1/4 1.516 .562 .219 .687 .047 9/16

6-SATPM-2 6-2 T2HF 3/8 1/8 1.343 .375 .187 .718 .047 7/16

6-SATPM-4 6-4 T2HF 3/8 1/4 1.562 .562 .281 .718 .047 9/16

6-SATPM-6 6-6 T2HF 3/8 3/8 1.609 .562 .281 .718 .047 11/16

6-SATPM-8 6-8 T2HF 3/8 1/2 1.812 .750 .281 .718 .047 7/88-SATPM-4 8-4 T2HF 1/2 1/4 1.828 .562 .281 .984 .062 9/168-SATPM-6 8-6 T2HF 1/2 3/8 1.859 .562 .375 .984 .062 11/168-SATPM-8 8-8 T2HF 1/2 1/2 2.078 .750 .375 .984 .062 7/810-SATPM-6 10-6 T2HF 5/8 3/8 1.906 .562 .375 1.031 .078 11/1610-SATPM-8 10-8 T2HF 5/8 1/2 2.125 .750 .468 1.031 .078 7/810-SATPM-12 10-12 T2HF 5/8 3/4 2.125 .750 .468 1.031 .078 1-1/1612-SATPM-8 12-8 T2HF 3/4 1/2 2.125 .750 .468 1.031 .086 7/812-SATPM-12 12-12 T2HF 3/4 3/4 2.125 .750 .578 1.031 .086 1-1/1612-SATPM-16 12-16 T2HF 3/4 1 2.406 .937 .578 1.031 .086 1-3/814-SATPM-12 14-12 T2HF 7/8 3/4 2.172 .750 .687 1.078 .094 1-3/816-SATPM-12 16-12 T2HF 1 3/4 2.390 .750 .625 1.296 .094 1-1/1616-SATPM-16 16-16 T2HF 1 1 2.687 .937 .812 1.296 .094 1-3/8

Adapter Tube toMale Pipe





SBHASBHASBHA

PART INTERCHANGES T1 T2 A B C D E F L NH JNH BH PANELNUMBER WITH TUBE TUBE THRU NUT JAM NUT BODY HOLE

O.D. O.D. HOLE HEX HEX HEX2-SBHA-2 2-2 T2H2BZ 1/8 1/8 2.000 .500 1.234 .562 .078 .969 1.234 7/16 1/2 1/2 21/64

4-SBHA-4 4-4 T2H2BZ 1/4 1/4 2.203 .609 1.328 .640 .156 1.031 1.906 9/16 5/8 5/8 29/64

6-SBHA-6 6-6 T2H2BZ 3/8 3/8 2.437 .656 1.453 .718 .281 1.156 2.156 11/16 3/4 3/4 37/64

8-SBHA-8 8-8 T2H2BZ 1/2 1/2 2.953 .906 1.656 .984 .375 1.250 2.547 7/8 15/16 15/16 49/64

Bulkhead Adapter


SBHFPSBHFPSBHFP

PART INTERCHANGES T P A B C D E L NH JNH BH PANELNUMBER WITH TUBE PIPE END THRU NUT JAM NUT BODY HOLE

O.D. NPT HOLE HEX HEX HEX2-SBHFP-2 2-2 GH2BZ 1/8 1/8 1.766 .500 1.234 .969 .094 1.500 7/16 1/2 9/16 21/64

3-SBHFP-2 3-2 GH2BZ 3/16 1/8 1.797 .547 1.266 1.000 .125 1.531 1/2 9/16 9/16 25/64

4-SBHFP-2 4-2 GH2BZ 1/4 1/8 1.859 .609 1.328 1.031 .187 1.562 9/16 5/8 5/8 29/64

4-SBHFP-4 4-4 GH2BZ 1/4 1/4 2.047 .609 1.328 1.031 .187 1.750 9/16 5/8 3/4 29/64

5-SBHFP-2 5-2 GH2BZ 5/16 1/8 1.969 .641 1.422 1.125 .250 1.656 5/8 3/4 11/16 33/64

6-SBHFP-4 6-4 GH2BZ 3/8 1/4 2.172 .656 1.453 1.156 .281 1.875 11/16 3/4 3/4 37/64

8-SBHFP-6 8-6 GH2BZ 1/2 3/8 2.437 .906 1.656 1.250 .406 2.031 7/8 15/16 15/16 49/64

8-SBHFP-8 8-8 GH2BZ 1/2 1/2 2.625 .906 1.656 1.250 .406 2.219 7/8 15/16 1-1/16 49/64

10-SBHFP-8 10-8 GH2BZ 5/8 1/2 2.656 .969 1.687 1.281 .500 2.250 1 1-1/16 1-1/16 57/64

16-SBHFP-16 16-16 GH2BZ 1 1 3.687 1.234 2.266 1.781 .875 3.187 1-1/2 1-1/2 1-5/8 1-21/64

Bulkhead FemalePipe Connector




SBHMPSBHMPSBHMP

PART INTERCHANGES T P A B C D E1

F L NH JNH BH PANELNUMBER WITH TUBE PIPE END THRU NUT JAM NUT BODY HOLE

O.D. NPT HOLE HEX HEX HEX1-SBHMP-1 1-1 FH2BZ 1/16 1/16 1.187 .437 .687 .375 .052 .531 1.031 5/16 7/16 5/16 13/64

1-SBHMP-2 1-2 FH2BZ 1/16 1/8 1.234 .437 .687 .375 .052 .531 1.094 5/16 7/16 7/16 13/64

2-SBHMP-2 2-2 FH2BZ 1/8 1/8 1.828 .500 1.234 .375 .094 .969 1.578 7/16 1/2 1/2 21/64

3-SBHMP-2 3-2 FH2BZ 3/16 1/8 1.859 .547 1.266 .375 .125 1.000 1.594 1/2 9/16 9/16 25/64

4-SBHMP-2 4-2 FH2BZ 1/4 1/8 1.953 .609 1.328 .375 .187 1.031 1.656 9/16 5/8 5/8 29/64

4-SBHMP-4 4-4 FH2BZ 1/4 1/4 2.109 .609 1.328 .562 .187 1.031 1.843 9/16 5/8 5/8 29/64

4-SBHMP-6 4-6 FH2BZ 1/4 3/8 2.187 .609 1.328 .562 .187 1.016 1.891 9/16 5/8 11/16 29/64

4-SBHMP-8 4-8 FH2BZ 1/4 1/2 2.484 .609 1.328 .562 .187 1.016 2.187 9/16 5/8 7/8 29/64

6-SBHMP-4 6-4 FH2BZ 3/8 1/4 2.266 .656 1.453 .562 .281 1.156 1.969 11/16 3/4 3/4 37/64

6-SBHMP-6 6-6 FH2BZ 3/8 3/8 2.312 .656 1.437 .562 .281 1.156 1.969 11/16 3/4 3/4 37/64

6-SBHMP-8 6-8 FH2BZ 3/8 1/2 2.609 .656 1.437 .750 .281 1.156 2.312 11/16 3/4 7/8 37/64

8-SBHMP-4 8-4 FH2BZ 1/2 1/4 2.547 .906 1.656 .562 .281 1.250 2.141 7/8 15/16 15/16 49/64

8-SBHMP-6 8-6 FH2BZ 1/2 3/8 2.484 .906 1.656 .562 .375 1.250 2.094 7/8 15/16 15/16 49/64

8-SBHMP-8 8-8 FH2BZ 1/2 1/2 2.719 .906 1.656 .750 .406 1.250 2.312 7/8 15/16 15/16 49/64

Bulkhead MalePipe Connector




SBHU/SBUANFSBHU/SBUANFSBHU/SBUANF

PART INTERCHANGES T A B C1 C2 D E L NH JNH BH PANELNUMBER WITH TUBE THRU NUT JAM NUT BODY HOLE

O.D. HOLE HEX HEX HEX1-SBHU-1 1-1 WBZ 1/16 1.234 .344 .687 .437 .531 .052 .937 5/16 5/16 5/16 13/64

2-SBHU-2 2-2 WBZ 1/8 2.016 .500 1.234 .609 .969 .094 1.500 7/16 1/2 1/2 21/64

3-SBHU-3 3-3 WBZ 3/16 2.109 .547 1.266 .625 1.000 .125 1.594 1/2 9/16 9/16 25/64

4-SBHU-4 4-4 WBZ 1/4 2.266 .609 1.328 .703 1.031 .187 1.687 9/16 5/8 5/8 29/64

5-SBHU-5 5-5 WBZ 5/16 2.391 .641 1.406 .734 1.125 .250 1.812 5/8 11/16 11/16 33/64

6-SBHU-6 6-6 WBZ 3/8 2.453 .656 1.453 .766 1.156 .281 1.875 11/16 3/4 3/4 37/64

8-SBHU-8 8-8 WBZ 1/2 2.797 .906 1.656 .859 1.250 .406 2.000 7/8 15/16 15/16 49/64

10-SBHU-10 10-10 WBZ 5/8 2.859 .969 1.687 .859 1.281 .500 2.062 1 1-1/16 1-1/16 57/64

12-SBHU-12 12-12 WBZ 3/4 3.109 .969 1.875 .859 1.469 .625 2.312 1-1/8 1-3/16 1-3/16 1-1/64

14-SBHU-14 14-14 WBZ 7/8 3.328 1.031 2.094 .875 1.687 .718 2.531 1-1/4 1-3/8 1-3/8 1-9/64

16-SBHU-16 16-16 WBZ 1 3.766 1.234 2.266 1.047 1.781 .875 2.812 1-1/2 1-5/8 1-5/8 1-21/64

PART INTERCHANGES T J A B C D E1

F L NH BH JNH PANELNUMBER WITH TUBE THREAD THRU NUT BODY JAM NUT HOLE

O.D. HOLE HEX HEX HEX2-SBUANF-2 2-2 XH2BZ 1/8 5/16-24 1.906 .500 1.234 .453 .062 .969 1.656 7/16 1/2 1/2 21/64

3-SBUANF-3 3-3 XH2BZ 3/16 3/8-24 1.984 .547 1.266 .484 .125 1.000 1.719 1/2 9/16 9/16 25/64

4-SBUANF-4 4-4 XH2BZ 1/4 7/16-20 2.125 .609 1.328 .547 .172 1.031 1.828 9/16 5/8 5/8 29/64

5-SBUANF-5 5-5 XH2BZ 5/16 1/2-20 2.219 .641 1.406 .547 .234 1.125 1.922 5/8 11/16 11/16 33/64

6-SBUANF-6 6-6 XH2BZ 3/8 9/16-18 2.250 .656 1.453 .562 .281 1.156 1.969 11/16 11/16 3/4 37/64

8-SBUANF-8 8-8 XH2BZ 1/2 3/4-16 2.594 .906 1.656 .656 .391 1.250 2.187 7/8 15/16 15/16 49/64

10-SBUANF-10 10-10 XH2BZ 5/8 7/8-14 2.734 .969 1.687 .766 .484 1.281 2.234 1 1-1/16 1-1/16 57/64

12-SBUANF-12 12-12 XH2BZ 3/4 1-1/16-12 3.109 .969 1.875 .859 .609 1.469 2.719 1-1/8 1-3/16 1-3/16 1-1/64

16-SBUANF-16 16-16 XH2BZ 1 1-5/16-12 3.641 1.234 2.266 .906 .844 1.781 3.156 1-1/2 1-5/8 1-5/8 1-21/64

Bulkhead Union

Bulkhead to ANFlare Union




SCAP/SF PLUGSCAP/SF PlugSCAP/SF Plug

Cap


PART INTERCHANGES T A B C L BH NHNUMBER WITH TUBE O.D. BODY HEX NUT HEX1-SCAP 1 PNBZ 1/16 .594 .344 .437 .437 5/16 5/16

2-SCAP 2 PNBZ 1/8 .797 .500 .609 .531 7/16 7/16

3-SCAP 3 PNBZ 3/16 .844 .547 .625 .578 7/16 1/2

4-SCAP 4 PNBZ 1/4 .922 .609 .703 .625 1/2 9/16

5-SCAP 5 PNBZ 5/16 .969 .641 .734 .672 9/16 5/8

6-SCAP 6 PNBZ 3/8 1.016 .656 .766 .719 5/8 11/16

8-SCAP 8 PNBZ 1/2 1.156 .906 .859 .750 13/16 7/8

10-SCAP 10 PNBZ 5/8 1.188 .969 .859 .781 15/16 1

12-SCAP 12 PNBZ 3/4 1.234 .969 .859 .844 1-1/16 1-1/8

14-SCAP 14 PNBZ 7/8 1.344 1.016 .859 .937 1-3/16 1-1/4

16-SCAP 16 PNBZ 1 1.516 1.234 1.047 1.031 1-3/8 1-1/2


Fitting Plug

PART INTERCHANGES T NHNUMBER WITH TUBE O.D. NUT HEX1-SF PLUG 1 FNZ 1/16 5/16

2-SF PLUG 2 FNZ 1/8 7/16

3-SF PLUG 3 FNZ 3/16 1/2

4-SF PLUG 4 FNZ 1/4 9/16

5-SF PLUG 5 FNZ 5/16 5/8

6-SF PLUG 6 FNZ 3/8 11/16

8-SF PLUG 8 FNZ 1/2 7/8

10-SF PLUG 10 FNZ 5/8 1

12-SF PLUG 12 FNZ 3/4 1-1/8

14-SF PLUG 14 FNZ 7/8 1-1/4

16-SF PLUG 16 FNZ 1 1-1/2


SFCSFCSFC

Female Connector



PART INTERCHANGES T P A B C E L NH BHNUMBER WITH TUBE PIPE END THRU NUT BODY

O.D. NPT HOLE HEX HEX1-SFC-1 1-1 GBZ 1/16 1/16 .937 .344 .437 .052 .782 5/16 7/161-SFC-2 1-2 GBZ 1/16 1/8 .969 .344 .437 .052 .812 5/16 9/162-SFC-2 2-2 GBZ 1/8 1/8 1.125 .500 .609 .094 .875 7/16 9/162-SFC-4 2-4 GBZ 1/8 1/4 1.328 .500 .609 .094 1.062 7/16 3/42-SFC-6 2-6 GBZ 1/8 3/8 1.390 .500 .609 .094 1.125 7/16 7/83-SFC-2 3-2 GBZ 3/16 1/8 1.171 .547 .625 .125 .906 1/2 9/163-SFC-4 3-4 GBZ 3/16 1/4 1.344 .547 .625 .125 1.094 1/2 3/43-SFC-8 3-8 GBZ 3/16 1/2 1.594 .547 .625 .125 1.344 1/2 1-1/164-SFC-1 4-1 GBZ 1/4 1/16 1.203 .609 .703 .187 .906 9/16 1/24-SFC-2 4-2 GBZ 1/4 1/8 1.234 .609 .703 .187 .937 9/16 9/164-SFC-4 4-4 GBZ 1/4 1/4 1.406 .609 .703 .187 1.125 9/16 3/44-SFC-6 4-6 GBZ 1/4 3/8 1.484 .609 .703 .187 1.187 9/16 7/84-SFC-8 4-8 GBZ 1/4 1/2 1.670 .609 .703 .187 1.375 9/16 1-1/165-SFC-2 5-2 GBZ 5/16 1/8 1.266 .640 .734 .250 .969 5/8 9/165-SFC-4 5-4 GBZ 5/16 1/4 1.453 .640 .734 .250 1.156 5/8 3/45-SFC-6 5-6 GBZ 5/16 3/8 1.515 .640 .734 .250 1.218 5/8 7/85-SFC-8 5-8 GBZ 5/16 1/2 1.703 .640 .734 .250 1.406 5/8 1-1/166-SFC-2 6-2 GBZ 3/8 1/8 1.297 .656 .766 .281 1.000 11/16 5/86-SFC-4 6-4 GBZ 3/8 1/4 1.484 .656 .766 .281 1.187 11/16 3/46-SFC-6 6-6 GBZ 3/8 3/8 1.547 .656 .766 .281 1.250 11/16 7/86-SFC-8 6-8 GBZ 3/8 1/2 1.734 .656 .766 .281 1.437 11/16 1-1/166-SFC-12 6-12 GBZ 3/8 3/4 1.875 .656 .766 .281 1.593 11/16 1-1/48-SFC-4 8-4 GBZ 1/2 1/4 1.593 .906 .859 .406 1.187 7/8 13/168-SFC-6 8-6 GBZ 1/2 3/8 1.656 .906 .859 .406 1.250 7/8 7/88-SFC-8 8-8 GBZ 1/2 1/2 1.843 .906 .859 .406 1.437 7/8 1-1/168-SFC-12 8-12 GBZ 1/2 3/4 1.906 .906 .859 .406 1.500 7/8 1-1/48-SFC-16 8-16 GBZ 1/2 1 2.265 .906 .859 .406 1.875 7/8 1-5/810-SFC-4 10-4 GBZ 5/8 1/4 1.797 .969 .859 .281 1.406 1 15/1610-SFC-6 10-6 GBZ 5/8 3/8 1.656 .969 .859 .500 1.250 1 15/1610-SFC-8 10-8 GBZ 5/8 1/2 1.844 .969 .859 .500 1.437 1 1-1/1610-SFC-12 10-12 GBZ 5/8 3/4 1.953 .969 .859 .500 1.500 1 1-1/412-SFC-6 12-6 GBZ 3/4 3/8 1.655 .969 .859 .500 1.265 1-1/8 1-1/1612-SFC-8 12-8 GBZ 3/4 1/2 1.844 .969 .859 .625 1.437 1-1/8 1-1/1612-SFC-12 12-12 GBZ 3/4 3/4 1.906 .969 .859 .625 1.500 1-1/8 1-1/412-SFC-16 12-16 GBZ 3/4 1 2.265 .969 .859 .625 1.875 1-1/8 1-5/814-SFC-8 14-8 GBZ 7/8 1/2 1.828 1.016 .859 .687 1.437 1-1/4 1-3/1614-SFC-12 14-12 GBZ 7/8 3/4 1.969 1.016 .859 .719 1.562 1-1/4 1-3/814-SFC-16 14-16 GBZ 7/8 1 2.234 1.016 .859 .719 1.843 1-1/4 1-5/816-SFC-12 16-12 GBZ 1 3/4 2.109 1.234 1.047 .875 1.625 1-1/2 1-3/816-SFC-16 16-16 GBZ 1 1 2.453 1.234 1.047 .875 1.969 1-1/2 1-5/8


SMCSMCSMC


L NH BHNUMBER WITH TUBE PIPE END THRU NUT BODY

O.D. NPT HOLE HEX HEX1-SMC-1 1-1 FBZ 1/16 1/16 .937 .344 .437 .375 .052 .797 5/16 5/16

1-SMC-2 1-2 FBZ 1/16 1/8 1.031 .344 .437 .375 .052 .875 5/16 7/16

2-SMC-1 2-1 FBZ 1/8 1/16 1.172 .500 .609 .375 .094 .906 7/16 7/16

2-SMC-2 2-2 FBZ 1/8 1/8 1.203 .500 .609 .375 .094 .937 7/16 7/16

2-SMC-4 2-4 FBZ 1/8 1/4 1.406 .500 .609 .562 .094 1.140 7/16 9/16

2-SMC-6 2-6 FBZ 1/8 3/8 1.406 .500 .609 .562 .094 1.156 7/16 11/16

2-SMC-8 2-8 FBZ 1/8 1/2 1.656 .500 .609 .750 .094 1.406 7/16 7/8

3-SMC-2 3-2 FBZ 3/16 1/8 1.234 .546 .625 .375 .125 .969 1/2 7/16

3-SMC-4 3-4 FBZ 3/16 1/4 1.437 .546 .625 .562 .125 1.171 1/2 9/16

4-SMC-1 4-1 FBZ 1/4 1/16 1.299 .609 .703 .375 .125 1.000 9/16 1/2

4-SMC-2 4-2 FBZ 1/4 1/8 1.299 .609 .703 .375 .187 1.000 9/16 1/2

4-SMC-4 4-4 FBZ 1/4 1/4 1.484 .609 .703 .562 .187 1.203 9/16 9/16

4-SMC-6 4-6 FBZ 1/4 3/8 1.516 .609 .703 .562 .187 1.219 9/16 11/16

4-SMC-8 4-8 FBZ 1/4 1/2 1.766 .609 .703 .750 .187 1.469 9/16 7/8

4-SMC-12 4-12 FBZ 1/4 3/4 1.828 .609 .703 .750 .187 1.531 9/16 1-1/16

4-SMC-16 4-16 FBZ 1/4 1 2.109 .609 .703 .937 .187 1.812 9/16 1-3/8

5-SMC-2 5-2 FBZ 5/16 1/8 1.343 .641 .734 .375 .187 1.047 5/8 9/16

5-SMC-4 5-4 FBZ 5/16 1/4 1.516 .641 .734 .562 .250 1.234 5/8 9/16

5-SMC-6 5-6 FBZ 5/16 3/8 1.547 .641 .734 .562 .250 1.250 5/8 11/16

5-SMC-8 5-8 FBZ 5/16 1/2 1.765 .641 .734 .750 .250 1.468 5/8 7/8

6-SMC-2 6-2 FBZ 3/8 1/8 1.390 .656 .766 .375 .187 1.109 11/16 5/8

6-SMC-4 6-4 FBZ 3/8 1/4 1.578 .656 .766 .562 .281 1.281 11/16 5/8

6-SMC-6 6-6 FBZ 3/8 3/8 1.578 .656 .766 .562 .281 1.281 11/16 11/16

6-SMC-8 6-8 FBZ 3/8 1/2 1.828 .656 .766 .750 .281 1.531 11/16 7/8

6-SMC-12 6-12 FBZ 3/8 3/4 1.875 .656 .766 .750 .281 1.593 11/16 1-1/16

6-SMC-16 6-16 FBZ 3/8 1 2.141 .656 .766 .937 .281 1.843 11/16 1-3/8

Male Connector



SMCSMCSMC

PART INTERCHANGES T P A B C D E1 L NH BHNUMBER WITH TUBE PIPE END THRU NUT BODY

O.D. NPT HOLE HEX HEX8-SMC-2 8-2 FBZ 1/2 1/8 1.531 .906 .859 .375 .187 1.125 7/8 13/16

8-SMC-4 8-4 FBZ 1/2 1/4 1.719 .906 .859 .562 .281 1.312 7/8 13/16

8-SMC-6 8-6 FBZ 1/2 3/8 1.719 .906 .859 .562 .375 1.312 7/8 13/16

8-SMC-8 8-8 FBZ 1/2 1/2 1.937 .906 .859 .750 .406 1.531 7/8 7/8

8-SMC-12 8-12 FBZ 1/2 3/4 1.984 .906 .859 .750 .406 1.593 7/8 1-1/16

8-SMC-16 8-16 FBZ 1/2 1 2.250 .906 .859 .937 .406 1.859 7/8 1-3/8

10-SMC-4 10-4 FBZ 5/8 1/4 1.934 .969 .859 .562 .281 1.343 1 15/16

10-SMC-6 10-6 FBZ 5/8 3/8 1.934 .969 .859 .562 .375 1.343 1 15/16

10-SMC-8 10-8 FBZ 5/8 1/2 1.937 .969 .859 .750 .469 1.531 1 15/16

10-SMC-12 10-12 FBZ 5/8 3/4 1.984 .969 .859 .750 .500 1.593 1 1-1/16

10-SMC-16 10-16 FBZ 5/8 1 2.172 .969 .859 .937 .500 1.781 1 1-3/8

12-SMC-4 12-4 FBZ 3/4 1/4 1.796 .969 .859 .562 .281 1.405 1-1/4 1-1/16

12-SMC-6 12-6 FBZ 3/4 3/8 1.796 .969 .859 .562 .375 1.405 1-1/4 1-1/16

12-SMC-8 12-8 FBZ 3/4 1/2 1.984 .969 .859 .750 .468 1.593 1-1/8 1-1/16

12-SMC-12 12-12 FBZ 3/4 3/4 1.984 .969 .859 .750 .625 1.593 1-1/8 1-1/16

12-SMC-16 12-16 FBZ 3/4 1 2.250 .969 .859 .937 .625 1.859 1-1/8 1-3/8

14-SMC-8 14-8 FBZ 7/8 1/2 1.984 1.015 .859 .750 .468 1.593 1-3/8 1-3/16

14-SMC-12 14-12 FBZ 7/8 3/4 1.984 1.015 .859 .750 .625 1.593 1-1/4 1-3/16

14-SMC-16 14-16 FBZ 7/8 1 2.250 1.015 .859 .937 .718 1.859 1-1/4 1-3/8

16-SMC-4 16-4 FBZ 1 1/4 2.055 1.234 1.046 .562 .281 1.562 1-1/2 1-3/8

16-SMC-6 16-6 FBZ 1 3/8 2.055 1.234 1.046 .562 .375 1.562 1-1/2 1-3/8

16-SMC-8 16-8 FBZ 1 1/2 2.265 1.234 1.046 .750 .468 1.781 1-1/2 1-3/8

16-SMC-12 16-12 FBZ 1 3/4 2.265 1.234 1.046 .750 .625 1.781 1-1/2 1-3/8

16-SMC-16 16-16 FBZ 1 1 2.453 1.234 1.046 .937 .875 1.969 1-1/2 1-3/8

Male Connector




SMC-ORSSMC-ORSSMC-ORS

PART INTERCHANGES T J A B C D E1 L NH BHNUMBER WITH TUBE O.D. THREAD THRU HOLE NUT HEX BODY HEX O-RING1-SMC-ORS 1-1 ZHBA5 1/16 5/16-24 1.047 .344 .437 .343 .052 .906 5/16 9/16 AS-011

2-SMC-ORS 2-2 ZHBA5 1/8 5/16-24 1.297 .500 .609 .343 .094 1.031 7/16 9/16 AS-011

3-SMC-ORS 3-3 ZHBA5 3/16 3/8-24 1.359 .547 .625 .375 .125 1.094 1/2 5/8 AS-012

4-SMC-ORS 4-4 ZHBA5 1/4 7/16-20 1.516 .609 .703 .406 .187 1.219 9/16 3/4 AS-111

5-SMC-ORS 5-5 ZHBA5 5/16 1/2-20 1.609 .641 .734 .437 .250 1.312 5/8 7/8 AS-112

6-SMC-ORS 6-6 ZHBA5 3/8 9/16-18 1.672 .656 .766 .468 .281 1.375 11/16 15/16 AS-113

8-SMC-ORS 8-8 ZHBA5 1/2 3/4-16 1.812 .906 .859 .468 .406 1.406 7/8 1-1/8 AS-116

12-SMC-ORS 12-12 ZHBA5 3/4 1-1/16-12 2.062 .969 .859 .562 .625 1.656 1-1/8 1-1/2 AS-215

16-SMC-ORS 16-16 ZHBA5 1 1-5/16-12 2.297 1.234 1.047 .562 .875 1.812 1-1/2 1-3/4 AS-219

O-Ring Straight ThreadMale Connector



SMC-ORTSMC-ORTSMC-ORT


L NH BHNUMBER WITH TUBE PIPE END THRU NUT BODY O-RING

O.D. NPT HOLE HEX HEX2-SMC-2-ORT 2-2 ZHBF5 1/8 1/8 1.297 .500 .609 .280 .094 1.031 7/16 3/4 AS-111

2-SMC-4-ORT 2-4 ZHBF5 1/8 1/4 1.437 .516 .609 .375 .094 1.172 7/16 15/16 AS-113

3-SMC-4-ORT 3-4 ZHBF5 3/16 1/4 1.469 .547 .641 .375 .125 1.203 1/2 15/16 AS-113

4-SMC-2-ORT 4-2 ZHBF5 1/4 1/8 1.375 .609 .703 .280 .187 1.094 9/16 3/4 AS-111

4-SMC-4-ORT 4-4 ZHBF5 1/4 1/4 1.516 .609 .703 .375 .187 1.219 9/16 15/16 AS-113

6-SMC-6-ORT 6-6 ZHBF5 3/8 3/8 1.625 .656 .766 .406 .281 1.344 11/16 1-1/8 AS-116

6-SMC-8-ORT 6-8 ZHBF5 3/8 1/2 1.859 .656 .766 .531 .281 1.562 11/16 1-3/8 AS-212

8-SMC-4-ORT 8-4 ZHBF5 1/2 1/4 1.687 .906 .875 .375 .281 1.281 7/8 15/16 AS-113

8-SMC-8-ORT 8-8 ZHBF5 1/2 1/2 1.969 .906 .859 .531 .406 1.562 7/8 1-3/8 AS-212

10-SMC-12-ORT 10-12 ZHBF5 5/8 3/4 2.062 .969 .875 .562 .500 1.656 1 1-1/2 AS-215

12-SMC-12-ORT 12-12 ZHBF5 3/4 3/4 2.062 .969 .875 .562 .625 1.656 1-1/8 1-1/2 AS-215

O-Ring Pipe Thread MaleConnector



**NOTE: Stainless steel and carbon steel o-seal fittings up to 1 inch are rated to 3000 psi.1 The E dimension is the minimum opening. These fittings may have a larger opening at the pipe/straight thread end.


**NOTE: Stainless steel and carbon steel o-seal fittings up to 1 inch are rated to 3000 psi.

SPCUSPCUSPCU

PART INTERCHANGES T A B ENUMBER WITH TUBE O.D. THRU HOLE1-SPCU-1 1-1 ZPC 1/16 .687 .437 .031

2-SPCU-2 2-2 ZPC 1/8 .969 .656 .078

4-SPCU-4 4-4 ZPC 1/4 1.078 .765 .156

5-SPCU-5 5-5 ZPC 5/16 1.125 .812 .219

6-SPCU-6 6-6 ZPC 3/8 1.156 .843 .281

8-SPCU-8 8-8 ZPC 1/2 1.594 1.109 .375

12-SPCU-12 12-12 ZPC 3/4 1.656 1.156 .578

16-SPCU-16 16-16 ZPC 1 2.125 1.437 .812

Port Connector Union


SRATTSRATTSRATT

PART iNTERCHANGES T1 T2 A B C E L NH BHNUMBER WITH TUBE O.D. TUBE O.D. THRU HOLE NUT HEX BODY HEX1-SRATT-2 2-1 TRBZ 1/16 1/8 1.187 .344 .437 .052 1.031 5/16 5/16

1-SRATT-4 4-1 TRBZ 1/16 1/4 1.281 .344 .437 .052 1.125 5/16 5/16

2-SRATT-1 1-2 TRBZ 1/8 1/16 1.250 .500 .609 .031 .984 7/16 7/16

2-SRATT-2 2-2 TRBZ 1/8 1/8 1.375 .500 .609 .078 1.109 7/16 7/16

2-SRATT-3 3-2 TRBZ 1/8 3/16 1.422 .500 .609 .094 1.156 7/16 7/16

2-SRATT-4 4-2 TRBZ 1/8 1/4 1.453 .500 .609 .094 1.187 7/16 7/16

2-SRATT-6 6-2 TRBZ 1/8 3/8 1.562 .500 .609 .094 1.296 7/16 7/16

2-SRATT-8 8-2 TRBZ 1/8 1/2 1.828 .500 .609 .094 1.562 7/16 9/16

3-SRATT-2 2-3 TRBZ 3/16 1/8 1.406 .547 .625 .078 1.141 1/2 7/16

3-SRATT-4 4-3 TRBZ 3/16 1/4 1.484 .547 .625 .125 1.218 1/2 7/16

4-SRATT-2 2-4 TRBZ 1/4 1/8 1.484 .609 .703 .078 1.187 9/16 1/2

4-SRATT-4 4-4 TRBZ 1/4 1/4 1.562 .609 .703 .156 1.265 9/16 1/2

4-SRATT-5 5-4 TRBZ 1/4 5/16 1.609 .609 .703 .187 1.312 9/16 1/2

4-SRATT-6 6-4 TRBZ 1/4 3/8 1.656 .609 .703 .187 1.359 9/16 1/2

4-SRATT-8 8-4 TRBZ 1/4 1/2 1.922 .609 .703 .187 1.625 9/16 9/16

4-SRATT-10 10-4 TRBZ 1/4 5/8 2.000 .609 .703 .187 1.703 9/16 11/16

5-SRATT-6 6-5 TRBZ 5/16 3/8 1.687 .641 .734 .250 1.390 5/8 9/16

5-SRATT-8 8-5 TRBZ 5/16 1/2 1.953 .641 .734 .250 1.656 5/8 9/16

6-SRATT-6 6-6 TRBZ 3/8 3/8 1.734 .656 .766 .281 1.437 11/16 5/8

6-SRATT-10 10-6 TRBZ 3/8 5/8 2.062 .656 .766 .281 1.765 11/16 11/16

6-SRATT-12 12-6 TRBZ 3/8 3/4 2.078 .656 .766 .281 1.781 11/16 13/16

8-SRATT-4 4-8 TRBZ 1/2 1/4 1.796 .906 .859 .156 1.390 7/8 13/16

8-SRATT-6 6-8 TRBZ 1/2 3/8 1.890 .906 .859 .281 1.484 7/8 13/16

8-SRATT-8 8-8 TRBZ 1/2 1/2 2.140 .906 .859 .375 1.734 7/8 13/16

8-SRATT-10 10-8 TRBZ 1/2 5/8 2.187 .906 .859 .406 1.781 7/8 13/16

8-SRATT-12 12-8 TRBZ 1/2 3/4 2.187 .906 .859 .406 1.781 7/8 13/16

8-SRATT-16 16-8 TRBZ 1/2 1 2.546 .906 .859 .406 2.140 7/8 1-1/16

10-SRATT-12 12-10 TRBZ 5/8 3/4 2.218 .969 .859 .500 1.812 1 15/16

10-SRATT-14 14-10 TRBZ 5/8 7/8 2.265 .969 .859 .500 1.859 1 15/16

10-SRATT-16 16-10 TRBZ 5/8 1 2.484 .969 .859 .500 2.078 1 1-1/16

12-SRATT-8 8-12 TRBZ 3/4 1/2 2.234 .969 .859 .375 1.828 1-1/8 1-1/16

12-SRATT-16 16-12 TRBZ 3/4 1 2.546 .969 .859 .625 2.140 1-1/8 1-1/16

Reducer AdapterTube to Tube




SRPCSRPCSRPC

PART INTERCHANGES T1 T2 A B ENUMBER WITH TUBE O.D. TUBE O.D. THRU HOLE2-SRPC-1 1-2 ZPC 1/8 1/16 .906 .437 .0314-SRPC-1 1-4 ZPC 1/4 1/16 .968 .437 .031

4-SRPC-2 2-4 ZPC 1/4 1/8 1.078 .562 .078

6-SRPC-2 2-6 ZPC 3/8 1/8 1.109 .562 .078

6-SRPC-4 4-6 ZPC 3/8 1/4 1.156 .640 .156

8-SRPC-4 4-8 ZPC 1/2 1/4 1.359 .640 .156

8-SRPC-6 6-8 ZPC 1/2 3/8 1.406 .718 .281

12-SRPC-8 8-12 ZPC 3/4 1/2 1.718 .984 .375

Reducing PortConnector


SRUSRUSRU

PART INTERCHANGES T1 T2 A B1 B2 C1 C2 D E L NH1 NH2 BHNUMBER WITH TUBE. TUBE THRU NUT NUT BODY

O.D. O.D. HOLE HEX HEX HEX2-SRU-1 2-1 HBZ 1/8 1/16 1.219 .500 .344 .609 .437 .343 .052 .812 7/16 5/16 7/16

3-SRU-1 3-1 HBZ 3/16 1/16 1.266 .547 .344 .625 .437 .375 .052 .859 1/2 5/16 7/16

3-SRU-2 3-2 HBZ 3/16 1/8 1.437 .547 .500 .625 .609 .375 .094 .922 1/2 7/16 7/16

4-SRU-2 4-2 HBZ 1/4 1/8 1.516 .609 .500 .703 .609 .406 .094 .969 9/16 7/16 1/2

4-SRU-3 4-3 HBZ 1/4 3/16 1.547 .609 .547 .703 .625 .406 .125 1.000 9/16 1/2 1/2

5-SRU-2 5-2 HBZ 5/16 1/8 1.578 .641 .500 .734 .609 .437 .094 1.016 5/8 7/16 9/16

5-SRU-4 5-4 HBZ 5/16 1/4 1.656 .641 .609 .734 .703 .437 .187 1.078 5/8 9/16 9/16

6-SRU-1 6-1 HBZ 3/8 1/16 1.437 .656 .344 .765 .437 .468 .052 1.000 11/16 5/16 5/8

6-SRU-2 6-2 HBZ 3/8 1/8 1.609 .656 .500 .765 .609 .468 .094 1.062 11/16 7/16 5/8

6-SRU-4 6-4 HBZ 3/8 1/4 1.703 .656 .609 .765 .703 .468 .187 1.125 11/16 9/16 5/8

6-SRU-5 6-5 HBZ 3/8 5/16 1.734 .656 .641 .765 .734 .468 .250 1.156 11/16 5/8 5/8

8-SRU-2 8-2 HBZ 1/2 1/8 1.781 .906 .500 .859 .609 .468 .094 1.125 7/8 7/16 13/16

8-SRU-4 8-4 HBZ 1/2 1/4 1.859 .906 .609 .859 .703 .468 .187 1.156 7/8 9/16 13/16

8-SRU-6 8-6 HBZ 1/2 3/8 1.906 .906 .656 .859 .765 .468 .281 1.219 7/8 11/16 13/16

10-SRU-6 10-6 HBZ 5/8 3/8 1.937 .969 .656 .859 .765 .468 .281 1.250 1 11/16 15/16

10-SRU-8 10-8 HBZ 5/8 1/2 2.047 .969 .906 .859 .859 .468 .406 1.250 1 7/8 15/16

12-SRU-4 12-4 HBZ 3/4 1/4 1.937 .969 .609 .859 .703 .468 .187 1.250 1-1/8 9/16 1-1/16

12-SRU-6 12-6 HBZ 3/4 3/8 2.000 .969 .656 .859 .765 .468 .281 1.312 1-1/8 11/16 1-1/16

12-SRU-8 12-8 HBZ 3/4 1/2 2.109 .969 .906 .859 .859 .468 .406 1.312 1-1/8 7/8 1-1/16

12-SRU-10 12-10 HBZ 3/4 5/8 2.109 .969 .969 .859 .859 .468 .500 1.312 1-1/8 1 1-1/16

16-SRU-12 16-12 HBZ 1 3/4 2.469 1.234 .969 1.047 .859 .562 .625 1.594 1-1/2 1-1/8 1-3/8

Reducing Union



STBWSTBWSTBW

PART INTERCHANGES T BW A B C D E1

L NH BHNUMBER WITH TUBE O.D. THRU HOLE NUT HEX BODY HEX

2-STBW-2 2-1/8 ZHBW2 1/8 .405 1.203 .500 .609 .375 .094 .937 7/16 7/16

3-STBW-2 3-1/8 ZHBW2 3/16 .405 1.234 .547 .625 .375 .125 .969 1/2 7/16

4-STBW-2 4-1/8 ZHBW2 1/4 .405 1.297 .609 .703 .375 .187 1.000 9/16 1/2

4-STBW-4 4-1/4 ZHBW2 1/4 .540 1.484 .609 .703 .562 .187 1.203 9/16 9/16

5-STBW-4 5-1/4 ZHBW2 5/16 .540 1.516 .641 .734 .562 .250 1.234 5/8 9/16

6-STBW-4 6-1/4 ZHBW2 3/8 .540 1.578 .656 .766 .562 .281 1.281 11/16 5/8

6-STBW-6 6-3/8 ZHBW2 3/8 .675 1.578 .656 .766 .562 .281 1.281 11/16 3/4

6-STBW-8 6-1/2 ZHBW2 3/8 .840 1.828 .656 .766 .750 .281 1.531 11/16 7/8

8-STBW-6 8-3/8 ZHBW2 1/2 .675 1.719 .906 .859 .562 .406 1.312 7/8 13/16

8-STBW-8 8-1/2 ZHBW2 1/2 .840 1.937 .906 .859 .750 .406 1.531 7/8 7/8

8-STBW-12 8-3/4 ZHBW2 1/2 1.050 1.984 .906 .859 .750 .406 1.594 7/8 1-1/16

10-STBW-8 10-1/2 ZHBW2 5/8 .840 1.937 .969 .859 .750 .500 1.531 1 15/16

12-STBW-12 12-3/4 ZHBW2 3/4 1.050 1.984 .969 .859 .750 .625 1.594 1-1/8 1-1/16

16-STBW-16 16-1 ZHBW2 1 1.315 2.453 1.234 1.047 .937 .875 1.969 1-1/2 1-3/8

Tube to Butt WeldConnector




STSWSTSWSTSW

PART INTERCHANGES T1 T2 A B C D E F G L NH BHNUMBER WITH TUBE TUBE THRU NUT BODY

O.D. O.D. HOLE HEX HEX

2-STSW-2 2-2 ZHBW 1/8 1/8 1.141 .500 .609 .344 .094 .312 .250 .875 7/16 7/16

3-STSW-3 3-3 ZHBW 3/16 3/16 1.203 .547 .641 .375 .125 .406 .281 .937 1/2 7/16

4-STSW-4 4-4 ZHBW 1/4 1/4 1.328 .609 .703 .406 .187 .437 .312 1.031 9/16 1/2

6-STSW-6 6-6 ZHBW 3/8 3/8 1.484 .656 .766 .469 .281 .625 .375 1.187 11/16 5/8

8-STSW-8 8-8 ZHBW 1/2 1/2 1.625 .906 .859 .469 .406 .750 .500 1.219 7/8 13/16

10-STSW-10 10-10 ZHBW 5/8 5/8 1.656 .969 .859 .469 .500 .922 .500 1.250 1 15/16

12-STSW-12 12-12 ZHBW 3/4 3/4 1.719 .969 .859 .469 .625 1.047 .562 1.312 1-1/8 1-1/16

16-STSW-16 16-16 ZHBW 1 1 2.078 1.234 1.047 .562 .875 1.312 .750 1.594 1-1/2 1-3/8

Tube to Socket WeldConnector




SUSUSU

PART INTERCHANGES T A B C D E L NH BHNUMBER WITH TUBE O.D. THRU HOLE NUT HEX BODY HEX

1-SU 1-1 HBZ 1/16 .984 .344 .437 .281 .052 .687 5/16 5/16

2-SU 2-2 HBZ 1/8 1.406 .500 .609 .343 .094 .875 7/16 7/16

3-SU 3-3 HBZ 3/16 1.469 .547 .625 .375 .125 .953 1/2 7/16

4-SU 4-4 HBZ 1/4 1.609 .609 .703 .406 .187 1.031 9/16 1/2

5-SU 5-5 HBZ 5/16 1.687 .641 .734 .437 .250 1.109 5/8 9/16

6-SU 6-6 HBZ 3/8 1.766 .656 .766 .468 .281 1.187 11/16 5/8

8-SU 8-8 HBZ 1/2 2.016 .906 .859 .468 .406 1.219 7/8 13/16

10-SU 10-10 HBZ 5/8 2.047 .969 .859 .468 .500 1.250 1 15/16

12-SU 12-12 HBZ 3/4 2.109 .969 .859 .468 .625 1.312 1-1/8 1-1/16

14-SU 14-14 HBZ 7/8 2.187 1.016 .859 .468 .718 1.375 1-1/4 1-3/16

16-SU 16-16 HBZ 1 2.547 1.234 1.047 .562 .875 1.594 1-1/2 1-3/8

Union


SUANFSUANFSUANF

PART INTERCHANGES T J A B C D E1

L NH BHNUMBER WITH TUBE O.D. THREAD THRU HOLE NUT HEX BODY HEX

2-SUANF-2 2-2 XHBZ 1/8 5/16-24 1.234 .500 .609 .448 .062 .984 7/16 7/16

2-SUANF-4 4-2 XHBZ 1/8 7/16-20 1.375 .500 .609 .550 .094 1.125 7/16 1/2

3-SUANF-3 3-3 XHBZ 3/16 3/8-24 1.328 .547 .641 .479 .125 1.062 1/2 7/16

4-SUANF-4 4-4 XHBZ 1/4 7/16-20 1.484 .609 .703 .550 .172 1.187 9/16 1/2

5-SUANF-5 5-5 XHBZ 5/16 1/2-20 1.516 .641 .734 .550 .234 1.219 5/8 9/16

6-SUANF-4 4-6 XHBZ 3/8 7/16-20 1.562 .656 .766 .550 .172 1.266 11/16 5/8

6-SUANF-6 6-6 XHBZ 3/8 9/16-18 1.562 .656 .766 .556 .297 1.266 11/16 5/8

8-SUANF-8 8-8 XHBZ 1/2 3/4-16 1.812 .906 .859 .657 .391 1.406 7/8 13/16

10-SUANF-10 10-10 XHBZ 5/8 7/8-14 1.937 .969 .875 .758 .484 1.531 1 15/16

12-SUANF-12 12-12 XHBZ 3/4 1-1/16-12 2.109 .969 .859 .864 .609 1.703 1-1/8 1-1/8

16-SUANF-16 16-16 XHBZ 1 1-5/16-12 2.422 1.234 1.047 .911 .844 1.937 1-1/2 1-3/8

Tube to AN Flare Union




SELUSELUSELU

PART INTERCHANGES T A B C E L NH WNUMBER WITH TUBE O.D. THRU HOLE NUT HEX WRENCH FLAT1-SELU-1 1-1 EBZ 1/16 .750 .344 .437 .052 .609 5/16 7/16

2-SELU-2 2-2 EBZ 1/8 .875 .500 .609 .094 .625 7/16 3/8

3-SELU-3 3-3 EBZ 3/16 1.000 .547 .625 .125 .734 1/2 1/2

4-SELU-4 4-4 EBZ 1/4 1.062 .609 .703 .187 .766 9/16 1/2

5-SELU-5 5-5 EBZ 5/16 1.125 .640 .734 .250 .844 5/8 5/8

6-SELU-6 6-6 EBZ 3/8 1.203 .656 .766 .281 .906 11/16 5/8

8-SELU-8 8-8 EBZ 1/2 1.421 .906 .859 .406 1.016 7/8 13/16

10-SELU-10 10-10 EBZ 5/8 1.500 .969 .859 .500 1.109 1 15/16

12-SELU-12 12-12 EBZ 3/4 1.578 .969 .859 .625 1.171 1-1/8 1-1/16

14-SELU-14 14-14 EBZ 7/8 1.766 1.016 .859 .718 1.359 1-1/4 1-3/8

16-SELU-16 16-16 EBZ 1 1.937 1.234 1.047 .875 1.453 1-1/2 1-3/8

Union Elbow


SFESFESFE

PART INTERCHANGES T P A1 A2 B C E L NH WNUMBER WITH TUBE PIPE END THRU NUT WRENCH

O.D. NPT HOLE HEX FLAT1-SFE-2 1-2 DBZ 1/16 1/8 .812 .750 .500 .609 .052 .687 5/16 1/2

2-SFE-2 2-2 DBZ 1/8 1/8 .969 .750 .500 .609 .094 .719 7/16 1/2

2-SFE-4 2-4 DBZ 1/8 1/4 1.078 .875 .500 .609 .094 .828 7/16 11/16

3-SFE-2 3-2 DBZ 3/16 1/8 1.000 .750 .547 .625 .125 .734 1/2 1/2

4-SFE-2 4-2 DBZ 1/4 1/8 1.062 .750 .609 .703 .187 .781 9/16 1/2

4-SFE-4 4-4 DBZ 1/4 1/4 1.172 .875 .609 .703 .187 .875 9/16 11/16

4-SFE-6 4-6 DBZ 1/4 3/8 1.250 .875 .609 .703 .187 .969 9/16 13/16

4-SFE-8 4-8 DBZ 1/4 1/2 1.359 1.125 .609 .703 .187 1.078 9/16 1

5-SFE-2 5-2 DBZ 5/16 1/8 1.125 .750 .640 .734 .250 .844 5/8 9/16

5-SFE-4 5-4 DBZ 5/16 1/4 1.203 .875 .640 .734 .250 .906 5/8 11/16

6-SFE-2 6-2 DBZ 3/8 1/8 1.203 .750 .656 .766 .281 .906 11/16 5/8

6-SFE-4 6-4 DBZ 3/8 1/4 1.234 .875 .656 .766 .281 .937 11/16 11/16

6-SFE-6 6-6 DBZ 3/8 3/8 1.312 .875 .656 .766 .281 1.016 11/16 13/16

6-SFE-8 6-8 DBZ 3/8 1/2 1.429 1.125 .656 .766 .281 1.125 11/16 1-1/16

8-SFE-4 8-4 DBZ 1/2 1/4 1.429 .875 .906 .859 .406 1.016 7/8 13/16

8-SFE-6 8-6 DBZ 1/2 3/8 1.429 .875 .906 .859 .406 1.016 7/8 13/16

8-SFE-8 8-8 DBZ 1/2 1/2 1.531 1.125 .906 .859 .406 1.125 7/8 1-1/16

10-SFE-6 10-6 DBZ 5/8 3/8 1.500 .875 .969 .859 .500 1.109 1 15/16

10-SFE-8 10-8 DBZ 5/8 1/2 1.578 1.125 .969 .859 .500 1.171 1 1-1/16

12-SFE-8 12-8 DBZ 3/4 1/2 1.578 1.125 .969 .859 .625 1.171 1-1/8 1-1/16

12-SFE-12 12-12 DBZ 3/4 3/4 1.766 1.250 .969 .859 .625 1.359 1-1/8 1-3/8

14-SFE-12 14-12 DBZ 7/8 3/4 1.766 1.250 1.016 .859 .718 1.359 1-1/4 1-3/8

16-SFE-12 16-12 DBZ 1 3/4 1.937 1.250 1.234 1.049 .875 1.453 1-1/2 1-3/8

16-SFE-16 16-16 DBZ 1 1 1.984 1.500 1.234 1.049 .875 1.500 1-1/2 1-11/16

Female Elbow




SMESMESME

PART INTERCHANGES T P A1 A2 B C D E1

L NH WNUMBER WITH TUBE PIPE END THRU NUT WRENCH

O.D. NPT HOLE HEX FLAT1-SME-1 1-1 CBZ 1/16 1/16 .703 .703 .344 .437 .375 .052 .609 5/16 3/8

1-SME-2 1-2 CBZ 1/16 1/8 .750 .703 .344 .437 .375 .052 .609 5/16 7/16

2-SME-1 2-1 CBZ 1/8 1/16 .937 .703 .500 .609 .375 .094 .672 7/16 7/16

2-SME-2 2-2 CBZ 1/8 1/8 .937 .703 .500 .609 .375 .094 .672 7/16 7/16

2-SME-4 2-4 CBZ 1/8 1/4 .969 .922 .500 .609 .562 .094 .719 7/16 1/2

2-SME-6 2-6 CBZ 1/8 3/8 1.203 1.125 .500 .609 .562 .094 .812 7/16 13/16

3-SME-2 3-2 CBZ 3/16 1/8 1.000 .734 .547 .625 .375 .125 .734 1/2 1/2

3-SME-4 3-4 CBZ 3/16 1/4 1.000 .922 .547 .625 .562 .125 .734 1/2 1/2

4-SME-1 4-1 CBZ 1/4 1/16 1.203 .734 .609 .703 .375 .156 .766 9/16 1/2

4-SME-2 4-2 CBZ 1/4 1/8 1.062 .734 .609 .703 .375 .187 .766 9/16 1/2

4-SME-4 4-4 CBZ 1/4 1/4 1.062 .922 .609 .703 .562 .187 .766 9/16 1/2

4-SME-6 4-6 CBZ 1/4 3/8 1.172 1.031 .609 .703 .562 .187 .875 9/16 11/16

4-SME-8 4-8 CBZ 1/4 1/2 1.250 1.312 .609 .703 .750 .187 .969 9/16 13/16

4-SME-12 4-12 CBZ 1/4 3/4 1.546 1.500 .609 .703 .750 .187 1.093 9/16 1-1/16

5-SME-2 5-2 CBZ 5/16 1/8 1.125 .781 .641 .734 .375 .187 .844 5/8 9/16

5-SME-4 5-4 CBZ 5/16 1/4 1.125 .969 .641 .734 .562 .250 .844 5/8 9/16

5-SME-6 5-6 CBZ 5/16 3/8 1.203 1.031 .641 .734 .562 .250 .906 5/8 11/16

6-SME-2 6-2 CBZ 3/8 1/8 1.203 .812 .656 .766 .375 .187 .906 11/16 5/8

6-SME-4 6-4 CBZ 3/8 1/4 1.203 1.000 .656 .766 .562 .281 .906 11/16 5/8

6-SME-6 6-6 CBZ 3/8 3/8 1.234 1.031 .656 .766 .562 .281 .937 11/16 11/16


Male Elbow



SMESMESME

PART INTERCHANGES T P A1 A2 B C D E1


O.D. NPT HOLE HEX FLAT6-SME-8 6-8 CBZ 3/8 1/2 1.312 1.297 .656 .766 .750 .281 1.016 11/16 13/16

6-SME-12 6-12 CBZ 3/8 3/4 1.469 1.453 .656 .766 .750 .281 1.172 11/16 1-1/16

8-SME-2 8-2 CBZ 1/2 1/8 1.609 .937 .906 .859 .375 .187 1.009 7/8 13/16

8-SME-4 8-4 CBZ 1/2 1/4 1.422 1.109 .906 .859 .562 .281 1.016 7/8 13/16

8-SME-6 8-6 CBZ 1/2 3/8 1.422 1.109 .906 .859 .562 .375 1.016 7/8 13/16

8-SME-8 8-8 CBZ 1/2 1/2 1.422 1.297 .906 .859 .750 .406 1.016 7/8 13/16

8-SME-12 8-12 CBZ 1/2 3/4 1.578 1.453 .906 .859 .750 .406 1.172 7/8 1-1/16

10-SME-4 10-4 CBZ 5/8 1/4 1.498 1.125 .969 .859 .562 .281 1.093 1 1

10-SME-6 10-6 CBZ 5/8 3/8 1.500 1.187 .969 .859 .562 .375 1.109 1 15/16

10-SME-8 10-8 CBZ 5/8 1/2 1.500 1.375 .969 .859 .750 .469 1.109 1 15/16

10-SME-12 10-12 CBZ 5/8 3/4 1.578 1.453 .969 .859 .750 .500 1.172 1 1-1/16

10-SME-16 10-16 CBZ 5/8 1 1.780 1.844 .969 .859 .937 .500 1.375 1 1-1/2

12-SME-4 12-4 CBZ 3/4 1/4 1.576 1.250 .969 .859 .562 .281 1.172 1-1/4 1-1/16

12-SME-6 12-6 CBZ 3/4 3/8 1.576 1.250 .969 .859 .562 .406 1.172 1-1/4 1-1/16

12-SME-8 12-8 CBZ 3/4 1/2 1.561 1.453 .969 .859 .750 .469 1.172 1-1/8 1-1/16

12-SME-12 12-12 CBZ 3/4 3/4 1.578 1.453 .969 .859 .750 .625 1.172 1-1/8 1-1/16

14-SME-12 14-12 CBZ 7/8 3/4 1.766 1.641 1.016 .859 .750 .625 1.359 1-1/4 1-3/8

16-SME-4 16-4 CBZ 1 1/4 1.935 1.375 1.234 1.047 .562 .281 1.453 1-1/2 1-1/2

16-SME-8 16-8 CBZ 1 1/2 1.935 1.562 1.234 1.047 .750 .500 1.453 1-1/2 1-1/2

16-SME-12 16-12 CBZ 1 3/4 1.937 1.641 1.234 1.047 .937 .625 1.453 1-1/2 1-3/8

16-SME-16 16-16 CBZ 1 1 1.937 1.828 1.234 1.047 .937 .875 1.453 1-1/2 1-3/8


Male Elbow



STBWESTBWESTBWE

PART INTERCHANGES T BW A1 A2 B C D E1

L NH WNUMBER WITH TUBE THRU NUT WRENCH

O.D. HOLE HEX FLAT2-STBWE-2 2-1/8 ZEBW2 1/8 .405 .922 .719 .516 .609 .344 .094 .656 7/16 1/2

3-STBWE-2 3-1/8 ZEBW2 3/16 .405 1.016 .734 .547 .641 .375 .125 .734 1/2 1/2

4-STBWE-2 4-1/8 ZEBW2 1/4 .405 1.062 .734 .609 .703 .375 .187 .766 9/16 1/2

4-STBWE-4 4-1/4 ZEBW2 1/4 .540 1.062 .937 .609 .703 .562 .187 .766 9/16 1/2

6-STBWE-4 6-1/4 ZEBW2 3/8 .540 1.203 1.000 .656 .766 .562 .281 .906 11/16 5/8

8-STBWE-6 8-3/8 ZEBW2 1/2 .675 1.375 1.125 .906 .859 .562 .406 .969 7/8 13/16

8-STBWE-8 8-1/2 ZEBW2 1/2 .840 1.422 1.297 .906 .859 .750 .406 1.016 7/8 13/16

10-STBWE-8 10-1/2 ZEBW2 5/8 .840 1.437 1.312 .969 .859 .750 .500 1.031 1 7/8

12-STBWE-12 12-3/4 ZEBW2 3/4 1.050 1.578 1.453 .969 .859 .750 .625 1.172 1-1/8 1-1/16

16-STBWE-12 16-3/4 ZEBW2 1 1.050 1.937 1.625 1.234 1.047 .750 .875 1.453 1-1/2 1-3/8

16-STBWE-16 16-1 ZEBW2 1 1.315 1.937 1.844 1.234 1.047 .937 .875 1.453 1-1/2 1-3/8


Tube to Butt Weld Elbow


STSWESTSWESTSWE

PART INTERCHANGES T A1 A2 B C D E F L NH WNUMBER WITH TUBE THRU NUT WRENCH

O.D. HOLE HEX FLAT2-STSWE-2 2-2 ZEBW 1/8 .922 .625 .516 .609 .156 .094 .375 .656 7/16 5/16

3-STSWE-3 3-3 ZEBW 3/16 .984 .687 .547 .641 .203 .125 .437 .719 1/2 7/16

4-STSWE-4 4-4 ZEBW 1/4 1.062 .766 .609 .703 .312 .187 .500 .766 9/16 1/2

6-STSWE-6 6-6 ZEBW 3/8 1.203 .906 .656 .766 .375 .281 .625 .875 11/16 5/8

8-STSWE-8 8-8 ZEBW 1/2 1.422 1.016 .906 .859 .500 .406 .812 1.016 7/8 13/16

10-STSWE-10 10-10 ZEBW 5/8 1.562 1.156 .969 .875 .500 .500 .937 1.156 1 1-1/16

12-STSWE-12 12-12 ZEBW 3/4 1.562 1.312 .969 .875 .562 .625 1.094 1.156 1-1/8 1-1/16

16-STSWE-16 16-16 ZEBW 1 1.937 1.469 1.234 1.047 .750 .875 1.375 1.453 1-1/2 1-3/8

Tube to SocketWeld Elbow




STFTSTFTSTFT

PART INTERCHANGES T P A A1 A2 B C E L NH WNUMBER WITH TUBE PIPE END THRU NUT WRENCH

O.D. NPT HOLE HEX FLAT2-STFT-2 2-2-2 MBZ 1/8 1/8 1.719 .969 .750 .500 .609 .094 .719 7/16 1/2

3-STFT-2 3-2-3 MBZ 3/16 1/8 1.766 1.016 .750 .547 .641 .125 .750 1/2 9/16

4-STFT-2 4-2-4 MBZ 1/4 1/8 1.812 1.078 .750 .609 .703 .187 .781 9/16 9/16

4-STFT-4 4-4-4 MBZ 1/4 1/4 2.047 1.172 .875 .609 .703 .187 .875 9/16 11/16

5-STFT-2 5-2-5 MBZ 5/16 1/8 1.922 1.172 .750 .641 .734 .250 .875 5/8 5/8

6-STFT-4 6-4-6 MBZ 3/8 1/4 2.109 1.234 .875 .656 .766 .281 .937 11/16 11/16

8-STFT-4 8-4-8 MBZ 1/2 1/4 2.562 1.437 .875 .906 .875 .406 1.016 7/8 13/16

8-STFT-6 8-6-8 MBZ 1/2 3/8 2.297 1.422 .875 .906 .859 .406 1.016 7/8 13/16

8-STFT-8 8-8-8 MBZ 1/2 1/2 2.687 1.578 1.125 .906 .859 .406 1.172 7/8 1-1/16

10-STFT-8 10-8-10 MBZ 5/8 1/2 2.656 1.531 1.125 .969 .875 .500 1.125 1 1-1/16

12-STFT-12 12-12-12 MBZ 3/4 3/4 3.016 1.766 1.250 .969 .859 .625 1.359 1-1/8 1-3/8

14-STFT-12 14-12-14 MBZ 7/8 3/4 3.016 1.766 1.250 1.031 .875 .719 1.359 1-1/4 1-3/8

16-STFT-12 16-12-16 MBZ 1 3/4 3.187 1.937 1.250 1.234 1.047 .875 1.453 1-1/2 1-3/8

16-STFT-16 16-16-16 MBZ 1 1 3.516 2.016 1.500 1.234 1.047 .875 1.531 1-1/2 1-5/8

Female Run Tee


STMTSTMTSTMT

Male Run Tee



*Both tube ends are typical.

PART INTERCHANGES T P A A1 A2 B C D E1


O.D. NPT HOLE HEX FLAT2-STMT-2 2-2-2 RBZ 1/8 1/8 1.625 .937 .703 .500 .609 .375 .094 .672 7/16 7/16

3-STMT-2 3-2-3 RBZ 3/16 1/8 1.656 .969 .703 .547 .625 .375 .125 .703 1/2 7/16

4-STMT-2 4-2-4 RBZ 1/4 1/8 1.797 1.062 .734 .609 .703 .375 .187 .766 9/16 1/2

4-STMT-4 4-4-4 RBZ 1/4 1/4 1.984 1.062 .922 .609 .703 .562 .187 .766 9/16 5/8

5-STMT-2 5-2-5 RBZ 5/16 1/8 1.984 1.172 .828 .641 .725 .375 .187 .875 5/8 5/8

6-STMT-4 6-4-6 RBZ 3/8 1/4 2.203 1.203 1.000 .656 .766 .562 .281 .906 11/16 5/8

6-STMT-6 6-6-6 RBZ 3/8 3/8 2.422 1.312 1.109 .656 .766 .562 .281 1.016 11/16 13/16

8-STMT-6 8-6-8 RBZ 1/2 3/8 2.531 1.422 1.109 .906 .859 .562 .375 1.016 7/8 13/16

8-STMT-8 8-8-8 RBZ 1/2 1/2 2.719 1.422 1.297 .906 .859 .750 .406 1.016 7/8 13/16

10-STMT-8 10-8-10 RBZ 5/8 1/2 2.875 1.500 1.375 .969 .859 .750 .469 1.109 1 15/16

12-STMT-12 12-12-12 RBZ 3/4 3/4 3.016 1.578 1.453 .969 .859 .750 .625 1.172 1-1/8 1-1/16

14-STMT-12 14-12-14 RBZ 7/8 3/4 3.266 1.766 1.500 1.031 .875 .750 .625 1.359 1-1/4 1-5/16

16-STMT-12 16-12-16 RBZ 1 3/4 3.609 1.937 1.656 1.234 1.047 .750 .625 1.453 1-1/2 1-5/16

16-STMT-16 16-16-16 RBZ 1 1 3.781 1.937 1.844 1.234 1.047 .937 .875 1.453 1-1/2 1-3/8




STTFSTTFSTTF

PART INTERCHANGES T P A A1 A2 B C E L NH WNUMBER WITH TUBE PIPE END THRU NUT WRENCH

O.D. NPT HOLE HEX FLAT2-STTF-2 2-2-2 OBZ 1/8 1/8 1.937 .969 .750 .500 .609 .094 .719 7/16 1/2

3-STTF-2 3-3-2 OBZ 3/16 1/8 2.016 1.016 .750 .547 .641 .125 .750 1/2 1/2

4-STTF-2 4-4-2 OBZ 1/4 1/8 2.125 1.062 .750 .609 .703 .187 .766 9/16 1/2

4-STTF-4 4-4-4 OBZ 1/4 1/4 2.344 1.172 .875 .609 .703 .187 .875 9/16 11/16

5-STTF-2 5-5-2 OBZ 5/16 1/8 2.344 1.172 .750 .641 .734 .250 .875 5/8 5/8

6-STTF-4 6-6-4 OBZ 3/8 1/4 2.469 1.234 .875 .656 .766 .281 .937 11/16 11/16

8-STTF-4 8-8-4 OBZ 1/2 1/4 2.844 1.422 .875 .906 .859 .406 1.016 7/8 13/16

8-STTF-6 8-8-6 OBZ 1/2 3/8 2.844 1.422 .875 .906 .859 .406 1.016 7/8 13/16

8-STTF-8 8-8-8 OBZ 1/2 1/2 3.062 1.531 1.125 .906 .859 .406 1.125 7/8 1-1/16

10-STTF-8 10-10-8 OBZ 5/8 1/2 3.062 1.531 1.125 .969 .859 .500 1.125 1 1-1/16

12-STTF-12 12-12-12 OBZ 3/4 3/4 3.516 1.766 1.250 .969 .859 .625 1.359 1-1/8 1-3/8

14-STTF-12 14-14-12 OBZ 7/8 3/4 3.016 1.766 1.250 1.031 .875 .719 1.359 1-1/4 1-3/8

16-STTF-12 16-16-12 OBZ 1 3/4 3.859 1.937 1.250 1.234 1.047 .875 1.453 1-1/2 1-3/8

16-STTF-16 16-16-16 OBZ 1 1 3.969 1.984 1.500 1.234 1.047 .875 1.500 1-1/2 1-5/8

Female Branch Tee


STTMSTTMSTTM

PART INTERCHANGES T P A A1 A2 B C D E1


O.D. NPT HOLE HEX FLAT2-STTM-2 2-2-2 SBZ 1/8 1/8 1.859 .937 .703 .500 .609 .375 .094 .672 7/16 7/16

2-STTM-4 2-2-4 SBZ 1/8 1/4 1.937 .969 .922 .500 .609 .562 .094 .719 7/16 1/2

3-STTM-2 3-3-2 SBZ 3/16 1/8 1.922 .969 .703 .547 .625 .375 .125 .703 1/2 7/16

4-STTM-2 4-4-2 SBZ 1/4 1/8 2.125 1.062 .734 .609 .703 .375 .187 .765 9/16 1/2

4-STTM-4 4-4-4 SBZ 1/4 1/4 2.125 1.062 .922 .609 .703 .562 .187 .765 9/16 1/2

5-STTM-2 5-5-2 SBZ 5/16 1/8 2.344 1.172 .828 .641 .725 .375 .187 .875 5/8 5/8

6-STTM-4 6-6-4 SBZ 3/8 1/4 2.406 1.203 1.000 .656 .765 .562 .281 .906 11/16 5/8

6-STTM-6 6-6-6 SBZ 3/8 3/8 2.625 1.312 1.109 .656 .765 .562 .281 1.016 11/16 13/16

8-STTM-6 8-8-6 SBZ 1/2 3/8 2.844 1.422 1.109 .906 .859 .562 .375 1.016 7/8 13/16

8-STTM-8 8-8-8 SBZ 1/2 1/2 2.844 1.422 1.297 .906 .859 .750 .406 1.016 7/8 13/16

10-STTM-8 10-10-8 SBZ 5/8 1/2 3.062 1.531 1.406 .969 .859 .750 .469 1.125 1 1

12-STTM-12 12-12-12 SBZ 3/4 3/4 3.141 1.172 1.453 .969 .859 .750 .625 1.172 1-1/8 1-1/16

14-STTM-12 14-14-12 SBZ 7/8 3/4 3.516 1.766 1.500 1.031 .875 .750 .750 1.359 1-1/4 1-3/8

16-STTM-12 16-16-12 SBZ 1 3/4 3.875 1.937 1.656 1.234 1.047 .750 .625 1.453 1-1/2 1-3/8

16-STTM-16 16-16-16 SBZ 1 1 3.875 1.937 1.843 1.234 1.047 .937 .875 1.453 1-1/2 1-3/8

Male Branch Tee







STTTSTTTSTTT

PART INTERCHANGES T A A1 B C E L NH WNUMBER WITH TUBE O.D. THRU HOLE NUT HEX WRENCH FLAT1-STTT-1 1-1-1 JBZ 1/16 1.406 .703 .344 .437 .052 .547 5/16 3/8

2-STTT-2 2-2-2 JBZ 1/8 1.766 .875 .500 .609 .094 .625 7/16 3/8

3-STTT-3 3-3-3 JBZ 3/16 1.922 .969 .547 .625 .125 .703 1/2 7/16

4-STTT-4 4-4-4 JBZ 1/4 2.125 1.062 .609 .703 .187 .766 9/16 1/2

5-STTT-5 5-5-5 JBZ 5/16 2.344 1.172 .641 .734 .250 .875 5/8 5/8

6-STTT-6 6-6-6 JBZ 3/8 2.406 1.203 .656 .766 .281 .906 11/16 5/8

8-STTT-8 8-8-8 JBZ 1/2 2.844 1.422 .906 .859 .406 1.016 7/8 13/16

10-STTT-10 10-10-10 JBZ 5/8 3.062 1.531 .969 .859 .500 1.125 1 1-1/16

12-STTT-12 12-12-12 JBZ 3/4 3.141 1.578 .969 .859 .625 1.172 1-1/8 1-1/16

14-STTT-14 14-14-14 JBZ 7/8 3.516 1.766 1.016 .859 .718 1.359 1-1/4 1-3/8

16-STTT-16 16-16-16 JBZ 1 3.859 1.937 1.234 1.047 .875 1.453 1-1/2 1-3/8

Union Tee


SCRSCRSCR

PART INTERCHANGES T A A1 B C E L NH WNUMBER WITH TUBE O.D. THRU HOLE NUT HEX WRENCH FLAT2-SCR 2-2-2 JBZ 1/8 1.766 .875 .500 .609 .094 .625 7/16 3/8

4-SCR 4-4-4 JBZ 1/4 2.125 1.062 .609 .703 .187 .766 9/16 1/2

5-SCR 5-5-5 JBZ 5/16 2.344 1.172 .641 .734 .250 .875 5/8 5/8

6-SCR 6-6-6 JBZ 3/8 2.406 1.203 .656 .766 .281 .906 11/16 5/8

8-SCR 8-8-8 JBZ 1/2 2.844 1.422 .906 .859 .406 1.016 7/8 13/16

12-SCR 12-12-12 JBZ 3/4 3.016 1.516 .969 .859 .625 1.109 1-1/8 1-1/16

16-SCR 16-16-16 JBZ 1 3.687 1.844 1.234 1.047 .875 1.359 1-1/2 1-3/8

Union Cross





SBISBISBI

PART T W A E F LNUMBER TUBE O.D. REF. THRU HOLE TUBE I.D.3-SBI-031 3/16 .031 .566 .062 1/8 .518

4-SBI-022 1/4 .022 .566 .141 13/64 .518

4-SBI-031 1/4 .031 .566 .125 3/16 .518

4-SBI-040 1/4 .040 .566 .109 11/64 .518

4-SBI-062 1/4 .062 .566 .062 1/8 .518

5-SBI-031 5/16 .031 .566 .187 1/4 .518

5-SBI-062 5/16 .062 .566 .125 3/16 .518

5-SBI-094 5/16 .094 .566 .062 1/8 .518

5-SBI-103 5/16 .103 .566 .045 7/64 .518

6-SBI-049 3/8 .049 .566 .218 9/32 .518

6-SBI-062 3/8 .062 .566 .187 1/4 .518

6-SBI-094 3/8 .094 .566 .125 3/16 .518

6-SBI-159 3/8 .159 .566 .032 1/16 .518

8-SBI-035 1/2 .035 .750 .375 7/16 .702

8-SBI-049 1/2 .049 .750 .344 13/32 .702

8-SBI-062 1/2 .062 .750 .312 3/8 .702

8-SBI-125 1/2 .125 .750 .187 1/4 .702

10-SBI-049 5/8 .049 .750 .469 17/32 .702

10-SBI-062 5/8 .062 .750 .437 1/2 .702

10-SBI-125 5/8 .125 .750 .312 3/8 .702

10-SBI-187 5/8 .187 .750 .187 1/4 .702

12-SBI-049 3/4 .049 .750 .562 21/32 .702

12-SBI-062 3/4 .062 .750 .562 5/8 .702

12-SBI-125 3/4 .125 .750 .437 1/2 .702

14-SBI-049 7/8 .049 1.031 .687 25/32 .938

14-SBI-062 7/8 .062 1.031 .687 3/4 .938

14-SBI-125 7/8 .125 1.031 .562 5/8 .938

16-SBI-062 1 .062 1.031 .812 7/8 .938

16-SBI-125 1 .125 1.031 .687 3/4 .938

Barbed Insert


SPISPISPI

PART T W A E F LNUMBER TUBE O.D. REF. THRU HOLE TUBE I.D.3-SPI-031 3/16 .031 .566 .062 1/8 .518

4-SPI-022 1/4 .022 .566 .140 13/64 .518

4-SPI-031 1/4 .031 .566 .125 3/16 .518

4-SPI-040 1/4 .040 .566 .109 11/64 .518

5-SPI-062 5/16 .062 .566 .125 3/16 .518

5-SPI-094 5/16 .094 .566 .062 1/8 .518

6-SPI-049 3/8 .049 .566 .218 9/32 .518

6-SPI-062 3/8 .062 .566 .187 1/4 .518

6-SPI-094 3/8 .094 .566 .125 3/16 .518

8-SPI-035 1/2 .035 .750 .375 7/16 .702

8-SPI-049 1/2 .049 .750 .344 13/32 .702

8-SPI-062 1/2 .062 .750 .312 3/8 .702

8-SPI-125 1/2 .125 .750 .187 1/4 .702

10-SPI-049 5/8 .049 .750 .469 17/32 .702

10-SPI-062 5/8 .062 .750 .437 1/2 .702

10-SPI-125 5/8 .125 .750 .312 3/8 .702

12-SPI-049 3/4 .049 .750 .562 21/32 .702

12-SPI-062 3/4 .062 .750 .562 5/8 .702

12-SPI-125 3/4 .125 .750 .437 1/2 .702

14-SPI-049 7/8 .049 1.000 .687 25/32 .952

14-SPI-062 7/8 .062 1.000 .687 3/4 .952

14-SPI-125 7/8 .125 1.000 .562 5/8 .952

16-SPI-050 1 .050 1.000 .843 57/64 .952

16-SPI-062 1 .062 1.000 .812 7/8 .952

16-SPI-125 1 .125 1.000 .687 3/4 .952

Plane Insert




SN/SKNSN/SKNSN/SKN

PART INTERCHANGES T A NHNUMBER WITH TUBE O.D. NUT HEXSN-1 1 BZ 1/16 .312 5/16

SN-2 2 BZ 1/8 .469 7/16

SN-3 3 BZ 3/16 .469 1/2

SN-4 4 BZ 1/4 .500 9/16

SN-5 5 BZ 5/16 .531 5/8

SN-6 6 BZ 3/8 .562 11/16

SN-8 8 BZ 1/2 .687 7/8

SN-10 10 BZ 5/8 .687 1

SN-12 12 BZ 3/4 .687 1-1/8

SN-14 14 BZ 7/8 .687 1-1/4

SN-16 16 BZ 1 .812 1-1/2

Nut

Knurled Nut


The knurled nut is used with fittings where applications of a finger tight assembly is acceptable.Common applications include, but are not limited to, low pressure laboratory use on plastic tubing.

Knurled nuts are available in the same sizes as shown for CS-Lok® nuts (SN).The knurled nut part descriptor is SKN. For example, the part number for a 1/2" knurled nut is SS-SKN-8.

Nut/Collet Sets

COLLETSSC/SCSET/SNCSETSC/SCSET/SNCSET

PART INTERCHANGES TNUMBER WITH TUBE O.D.SC-1 1 TZ 1/16

SC-2 2 TZ 1/8

SC-3 3 TZ 3/16

SC-4 4 TZ 1/4

SC-5 5 TZ 5/16

SC-6 6 TZ 3/8

SC-8 8 TZ 1/2

SC-10 10 TZ 5/8

SC-12 12 TZ 3/4

SC-14 14 TZ 7/8

SC-16 16 TZ 1

PART INTERCHANGES QUANTITYNUMBER WITH TUBE O.D. (per arbor)

SCSET-4-10 4 CPI-SET 1/4


SCSET-8-10 8 CPI-SET 1/2 10


SCSET-16-10 16 CPI-SET 1

Single Collet(Ferrule)

Collet Sets




Collet sets and Nut/Collet sets make for easy storage and handling of nuts and single collets. CS-Lok® componentparts are precision made and should be handled with care. The components can be ordered on an arbor, whichaids in careful handling and prevents them from coming off. Pinch the end of the arbor to release the components.

Collet Sets contain 10 collets on an arbor.1/2" Collet Set part number: SS-SCSET-8-10

Nut/Collet Sets contain 5 nuts & 5 collets on an arbor.1/2" Nut/Collet Set part number: SS-SNCSET-8-5

PART QUANTITYNUMBER TUBE O.D. (per arbor)

SNCSET-4-5 1/4

SNCSET-6-5 3/8

SNCSET-8-5 1/2 5

SNCSET-12-5 3/4

SNCSET-16-5 1

Component Replacement Parts

TYLOKTYLOKTYLOK


The Instrument Tee may be ordered with any standardtube or pipe size. When ordering, specify sizes in thefollowing order:1. Tube Size O.D2. Female Pipe Size3. Male Pipe SizeExample: 1/2" tube, 3/8" female pipe, 1/4" male pipe.

SS-8-STFM-6-4

A Thermocouple Connector can be furnished alreadybored through for an additional charge. When ordering:1. Select required size male connector. See pages

13 and 14 for a listing of available MaleConnectors.

2. Add the letters “BT” to designate bore through.Example: 4-SMC-2-BT

The Heat Exchanger Tee may be ordered in any stan-dard tube size. The process tube is bored through.When ordering, specify sizes in the following order:1. Jacket Tube O.D2. Process Tube O.D. followed by “BT” for bore

through designation3. Branch Tube O.D.Example: 1/2" tube, 1/4" tube bored through, 1/2" tube.

SS-8-STTT-4BT-8

Tylube™ is an anti-gall com-pound to be used on stainlesssteel, steel and nickel basedalloys. Temperature range to500°F. Not recommended forplastic and aluminum products.Tylube™ is made from distilledwater with inert ingredients andcontains no silicones, heavymetals, chlorine or sulfur. Fora complete list of ingredientsrequest an MSDS to be sureof its compatibility with yourinstallation. Available in 8 oz.plastic bottles.

Instrument Tee

Thermocouple Bore Through

Heat Exchanger Tee

Tylube™ Thread Lubricant

TYLOKTYLOKTYLOK


CS-Lok® Tube Fittings come completely assembled and ready for use, no dissassemby required. Although thereare some general guide lines to follow no special preparation of the tubing is necessary, reference page 43.In overhead applications Tylok recommends using a Pre-Set Tool, see page 46.

Tighten nut with wrench an additional number of turnsindicated above, while holding the fitting body with asecond wrench.

CS-Lok® Installation Instructions

Simply insert the tubing into the assembly making surethe tubing seats firmly against the shoulder of thebody and the nut is finger tight.

Size Tighten # Turn(s)1 1/16”2 1/8” 3/43 3/16”4 1/4”5 5/16”6 3/8”8 1/2” 1-1/410 5/8”12 3/4”14 7/8”16 1”

To Remove Tube and Re-Connect Tube FittingMark the location of the nut with reference to the body before disassembly. For reassembly, re-insert the tubinginto the body until it is seated. With proper size wrench, retighten nut to original location by realigning previousmarks. A noticeable amount of torque will develop when the nut is turned to original position. Next, rotate the nutslightly past original position to fully re-set the seal.

Mark the location of the nut with reference to the body. Back off the nut until it is clear of the body and removethe tubing from the fitting.

Size #1 Thru #3 Size #4 Thru #16(1/16" – 3/16") (1/4" – 1")

Finger Tight Plus Finger Tight Plus3/4 Turn 1-1/4 Turns

TYLOKTYLOKTYLOK

43

CS-Lok® Tubing Selection & PreparationIt is the responsibility of the Engineer to refer to thetechnical pages in this catalog to ensure selection ofthe proper tubing material, tubing compatibility with thefitting, media and tubing wall thickness. Following thestated recommendations will ensure a safe application,free of leaks. The entire system must be consideredwhen selecting the fitting.


Proper selection of tubing is key to the performance of thefitting. When selecting the proper wall thickness andmaterial, all tubing should be compatible with the processfluid, temperature, application, flow and system pressure.

For proper sealing it is recommended that the tubing andfitting be of like material to allow for positive sealing (i.e.,stainless on stainless, brass on copper, steel on steel).Galvanic corrosion could occur if the tubing and fitting arenot of like material, with the exception of a brass fitting oncopper tubing.

When using stainless steel tubing, Tylok recommendsusing Type 304 or 316 fully annealed, seamless or weldedredrawn meeting ASTM-A-213, ASTM-A-269 or equivalent,with a suggested maximum hardness of 80 Rb.

For copper tubing, Tylok suggests using soft annealed,seamless tubing per ASTM-B75 or equivalent. Copperwater tube type K or L, soft annealed (Temper O) perASTM-B88 can also be used.

When using carbon steel, all tubing should be fullyannealed and conform to ASTM-A-179, or equivalent,with a maximum hardness of 72 Rb.

In general, all tubing should be free of nicks, scratches,imperfections of any kind and be suitable for bending.Out of round tubing that does not easily go through fittingcomponents should not be used. It is recommended thatthe charts be used for tube selection. Ideally, the tube endshould be cut square so that when it bottoms out insidethe fitting an extra seal is provided. Avoid installingcontaminated tubing into your system. For elevatedtemperatures see page 45.

CS-Lok® Tube Fittings swage the tubing to achieve itsseals. Thin wall tubing (wall thicknesses with workingpressures highlited in reverse text, in the charts) is notrecommended for Gas Service. For Gas Service seepage 44.

When using tubing of a thinner or thicker wall than shown,it is always recommended that you consult with your localDistributor or contact Tylok International directly if there isany doubt selecting tubing.


Note: Tables, calculated to the right, are suggested maximum workingpressure ratings, in accordance with ASME B31.3, but should be usedfor reference only. Tylok International, Inc., is not responsible for itsaccuracy nor designs using these figures. All compatible Tylok fittingswill withstand pressures above those listed for maximum tubingworking pressures.

75,000 PSI Tensile

Stainless SteelTube Tube Wall Thickness (inches)SizeO.D. .028 .035 .049 .065 .083 .095 .109 .120

1/8" 8400 106003/16" 5500 7000 101001/4" 4000 5100 7500 101005/16" 4100 5900 80003/8" 3300 4800 66001/2" 2600 3800 5100 67005/8" 3000 4000 5200 61003/4" 2500 3300 4300 5000 58007/8" 2100 2800 3600 4200 49001" 2400 3200 3700 4200 4700

47,000 PSI Tensile

Carbon SteelTube Tube Wall Thickness (inches)SizeO.D. .028 .035 .049 .065 .083 .095 .109 .120

1/8" 8100 102003/16" 5200 6700 96001/4" 3800 4900 7100 96005/16" 3800 5500 76003/8" 3100 4500 62001/2" 2300 3300 4500 60005/8" 2600 3500 4600 53503/4" 2200 2900 3800 4400 51007/8" 1800 2500 3200 3700 43001" 2100 2800 3200 3700 4200

SUGGESTED ALLOWABLE WORKINGPRESSURE TABLES (psig)

Note: For welded and drawn tubing, a derating factor must be utilized.For double welded tube, multiply the above pressure rating by .85;and for single welded tube by .80 (ANSI B 31, Table A-1B).

30,000 PSI Tensile

CopperTube Tube Wall Thickness (inches)SizeO.D. .028 .035 .049 .065 .083 .095 .109 .120

1/8" 2700 36003/16" 1800 2300 35001/4" 1300 1700 2500 36005/16" 1300 2000 28003/8" 1100 1600 23001/2" 800 1200 1700 22005/8" 900 1300 1700 19003/4" 800 1000 1400 1600 19007/8" 600 900 1100 1300 16001" 600 800 1000 1200 1400 1500

TYLOKTYLOKTYLOK


Gap Gages can be purchased to ensure the Installerand Inspector that the nut has been properlytightened. Available upon request.

When fitting is properly tightened, gap gage shouldnot fit between nut and shoulder of body.

• Never connect, disconnect or remake a fitting withpressure in the system

• Make sure all fittings are properly installed, referenceInstallation Instructions - page 42, before pressurizingthe system

• Tubing material should be softer than fitting material

• Tylok recommends using Tylok replacement parts

• Although the fittings will hold to the pressure ratingof the tubing, it is not recommended to go beyondthis rating. Elongation could occur in the tubing,shrinking the wall thickness and causing potentialharm to anyone in the area

• Always use proper thread lubricants and sealantson tapered pipe threads

• If process fluids are toxic and/or hazardous, exerciseextra caution

• Never bleed a system by loosening a fitting

• For proper sealing it is recommended that thetubing and fitting be of like material

All components are manufactured and inspected tomeet strict quality control standards in each phase ofproduction. All employees are thoroughly trained tofollow rigid procedures, in accordance with the ISO9001:2000 Quality Standard, to ensure a qualityproduct from the start of each job through completion.At Tylok our primary concern is quality, reliability andservice to our customers.

Gap Gages

Safety Guidelines

Quality Control

Extra care must be taken when tubing is used in gasservice applications. Small gas molecules easilyescape through minute leak paths, therefore, the tubingmust be free of nicks, scratches and imperfections ofany kind. In particular, when using large diameter tubingthe possibility of surface defects is increased due togreater surface area. It is strongly recommended thatthe heavier wall thicknesses be selected. Penetrationof the ferrule on thin wall tubing or soft material maynot offer enough radial resistance for sealing. In suchcases, Tylok recommends using a Plane Insert (Partdescriptor SPI, page 38). In the tables on page 43note the suggested allowable working pressure forgas service.

CS-Lok® Tube Fittings with weld ends offer thesame positive sealing as all other Tylok fittings.Welding could deform the assembly, making pull upsor disassembly difficult. Some precautions should betaken...

• Remove the nut and ferrule from the fitting

• It is important that the fitting threads and sealingsurfaces be protected from weld splatter

• A heat sink should be used to dissipate heat

• Ensure alignment by tack welding symmetrically

• Once welded, remove the weld splatter protectionand reassemble nut and ferrule on fitting

Tylok offers a leak detector, Tyspy, for use in all sealingapplications. Tyspy meets standard MIL-L-25567D,Sect. 4.4.9 for use on oxygen systems.Availiable in 1 pt. spray bottles. Specify number ofbottles needed when ordering. Part Number: TYSPY

• All temperature formula: -55°F to 200°F

• Ultra-sensitive

• Long-lasting bubbles

• Available in spray bottle

• Fluorescent for improved visibility

• Safe for oxygen systems

• Non-corrosive, non-toxic

Part Number Tube Size Part Number Tube Size#1-SGG 1/16” #8-SGG 1/2"#2-SGG 1/8” #10-SGG 5/8”#3-SGG 3/16” #12-SGG 3/4”#4-SGG 1/4” #14-SGG 7/8”#5-SGG 5/16” #16-SGG 1”#6-SGG 3/8”

Gas Service

Precautions forWeld Ends

Tyspy Leak Detector


TYLOKTYLOKTYLOK


Tylok Pipe Fittings are manufactured from materials meeting applicable ASTM or ASME specifications, with pipethreads which meet or exceed ANSI B1.20.1 requirements. Strict quality control procedures are followed through-out production. All parts are individually inspected to provide the finest possible product.

Materials: Brass ■ 316 Stainless Steel ■ Steel

Suggested Maximum Operating Pressures for Male Pipe Threads

Suggested Maximum Operating Pressures for Female Pipe Threads

These charts are to be used as a guide only and are based on normal wall thicknesses, used for the various sizes. These ratings may vary widely from effectssuch as the proper use of sealants, size of stock, temperature, corrosion factors, etc. Therefore, Tylok International, Inc., assumes no responsibility for its accuracyin any individual design.

Pipe Thread Specifications

Temperature Ratings

MNPT 316 Stainless Steel Brass SteelSize PSI Rating PSI Rating PSI Rating1/16" 10,100 5,700 10,5001/8" 9,200 5,300 9,8001/4" 7,500 4,100 8,0003/8" 7,250 4,000 7,7001/2" 6,900 3,900 7,3003/4" 6,600 3,700 7,0001" 5,000 2,700 5,000

FNPT 316 Stainless Steel Brass SteelSize PSI Rating PSI Rating PSI Rating1/16" 6,200 3,500 6,8001/8" 6,000 3,400 6,6001/4" 6,100 3,300 6,5003/8" 5,000 2,700 5,4001/2" 4,700 2,500 4,8003/4" 4,300 2,400 4,6001" 4,100 2,300 4,500

Tylok Instrumentation Fittings are rated at the following temperatures:

316 Stainless -325°F to 1200°F Brass -40°F to 400°F Steel -65°F to 400°F(-198°C to 648°C) (-40°C to 204°C) (-54°C to 204°C)

Note: Consideration should be given to maximum temperature ratings if fittings and/or tubing are coated or plated.

The following table lists derating factors that must be considered in applications above that of ambienttemperatures.

ExampleType 316 Stainless Steel 1/4" O.D. x .049" wall at800°F is…

7,500 PSI x .80 = 6,000 PSI

Therefore, the suggested allowable working pressurefor 316 Stainless Steel - 1/4" O.D. with .049" tubewall - at 800°F is 6,000 PSI.

These charts are to be used as a guide only and are based on normal wallthicknesses, used for the various sizes. These ratings may vary widely fromeffects such as the proper use of sealants, size of stock, temperature, cor-rosion factors, etc. Therefore, Tylok International, Inc., assumes no respon-sibility for its accuracy in any individual design.

Tube Pressure Derating Factors at Elevated Temperatures

Temperatures Multiplier Factors304 316 Carbon

°F °C SS SS Copper Steel200 93 1.00 1.00 .80 .95400 204 .94 .97 .50 .86600 315 .82 .85 .77800 427 .76 .80 .59

1000 538 .69 .771200 649 .30 .37

TYLOKTYLOKTYLOK


CS-Lok® Tube Fittings are completely heat code traceable back to the original mill heat from which it was made.Starting with the original billet, the mill creates a certificate which completely describes the chemical and physicalmakeup. For any one of the three components (body, ferrule, nut) the material certifications can be provided whencalling Tylok and giving the heat code stamp marked on the part itself, along with the part number.

Heat Traceability

RawMaterial Specifications

The CS-Lok® product line offers a Pre-Setting Toolwhen fittings need to be installed in hard to reachplaces. The Pre-Setting Tool is designed to be used inany tabletop vice. After tightening the nut the specifiednumber of turns, as stated in Installation Instructions -page 42, loosen the nut from the Pre-Setting Tool.Once the ferrule has swaged into the tubing surface,the assembly is ready for installation (reference ToRemove and Re-Connect Tube Fitting, page 42).

When ordering the CS-Lok® Pre-Set Tool,reference the part number in the chart. The Pre-SetTool is made from carbon steel and is hardened formaximum durability. The Pre-Set Tool can be usedrepeatedly to set the ferrule onto the tubing for easyinstallation.

Tylok Pre-Setting Tool

Place Pre-Setting Tool in a vice and tighten nutspecified number of turns.

Back nut off of Pre-Setting Tool. Notice the ferrulehas swaged into the tubing. Now take tubing toinstallation area.

Part Number Tube Size#1-SPST 1/16”#2-SPST 1/8”#3-SPST 3/16”#4-SPST 1/4”#5-SPST 5/16”#6-SPST 3/8”#8-SPST 1/2”

#10-SPST 5/8”#12-SPST 3/4”#14-SPST 7/8”#16-SPST 1”

Fitting Bar *Tubing Maximum SpecificationMaterial Stock Forging Specification Hardness (Tubing)

ASTM-B16 Alloy 360 ASTM-B75 60 Max.Brass ASTM-B453 Alloy 345 ASTM-B124 Alloy 377 Copper Rockwell 15T

(Temper O)

StainlessASTM-A276

ASME-SA-182 ASTM-A213Steel

ASME-SA-479Type 316-SS ASTM-A269

90 RbType 316-SS

Steel ASTM-A108 ASTM-A179 72 Rb

*Reference Tubing Selection & Preparation, page 43.

TYLOKTYLOKTYLOK


For pre-cutting tubing to length, the following chart shows the additional length inside the fitting assembly.

Tube Insertion Chart

Tube Size T Tube O.D. B Dimension#1 1/16 .34#2 1/8 .50#3 3/16 .54#4 1/4 .60#5 5/16 .64#6 3/8 .67#8 1/2 .90#10 5/8 .96#12 3/4 .96#14 7/8 1.03#16 1.0 1.24


Tubing–General Applications

CS-Lok® Tube Fittings are designed to perform in a variety of applications that demand high performance.The CS-Lok® product line has been engineered to provide optimal performance, however tubing should alwaysbe considered as an important factor in the design stages of any system. Below is a table that describes somegeneral uses for different types of materials. The table is provided as a reference to the Engineer in the designprocess.

Tylok suggests the use of seamless, fully annealed tubing. Welded tubing may be used with Tylok fittings. However,due to the manufacturing of welded tubing, variables may be encountered. The media flowing through the tubingmust be compatible with the tubing itself. It is always a good rule to use like tubing material on like fitting material.If this format is not followed, the ferrules may have difficulty penetrating the tubing causing an adverse affect on thesealing ability. In addition, dissimilar materials in contact may be sensitive to galvanic corrosion. Tylok recommendsordering tubing material to meet ASTM specifications to ensure that it will be dimensionally, physically and chemicallywithin precise limits (see Raw Material Specifications chart - page 46).

Tube Insertion DepthFinger Tight

Tubing RecommendedMaterial General Applications Temperature Range

Carbon Steel Air Lines, High Pressure, High Temperature, -20°F to 400°F*Oil, Air, Specialty Chemicals, Hydraulic Gases

Copper Low Temperature, Low Pressure Water, Oil, -40°F to 400°FAir, Pneumatic Controls, Lube Lines

Stainless Steel High Pressure, High Temperature, Nitrogen, -20°F to 1000°FHelium, Flammable Gases, Hydraulic, Gases,generally corrosive media

*Based on 400°F maximum.

TYLOKTYLOKTYLOK

NOTESNOTES


NoticeIn designing a system incorporating tube fittings and valves, it is the designer’s or user’s obligation and responsibility to determine the appropriate fittings and valves to be used foreach application, and to insure proper installation and maintenance.

Limited WarrantyTylok fittings and valves are warranted solely against defects in material and workmanship in the performance of the specific functions for which they are designed, as set forth in thepublished specifications for a period of 12 months. Should any fitting and valve or its component fail due to a defect in material or workmanship, Tylok will replace said fitting andvalve without charge upon return of the failed part and evidence of its failure being due tomaterials or workmanship.

The Warranty above set forth is the only warranty applicable to Tylok products, and is in lieu ofany and all other warranties either express or implied, including any warranty of merchantabilityor fitness. Tylok’s sole responsibility or liability as a result of any loss or damage due to failureshall be to replace the failed part or fitting and valve, and it shall bear no liability for any incidental or consequential damages to person or property.

©2008 Tylok International, Inc.All rights reserved.Litho in U.S.A.


TYLOKTYLOKTYLOK

OOuurr HHiissttoorryyIn the mid 1940s, Cullen Crawford founded the

Crawford Fitting Company. Mr. Crawford developed and

patented the original flareless fitting (nut and two ferrule

system), for the Crawford Fitting Company. Thus, a new and

innovative industry was born making it far easier to make

tubing connections. This reduces installation time and errors.

Since his invention, End Users from all four corners of the globe

have made billions of connections. This system provides leak

proof seals and thus Mr. Crawford has been named “The

founder of the flareless fitting.”

OOuurr MMiissssiioonnIt is our mission, at Tylok International, Inc., to continuously

strive for and achieve total customer satisfaction with both

our products and services.

OOuurr GGooaallTylok’s aggressive goal is to establish ourselves as

an industry leader and expand our market share.

This is maintained in every department within

the organization. Our “total effort” will

guard against losing the personal touch

that makes our business enjoyable

and prosperous for all involved.

INSTRUMENTATION

TUBE FITTINGS

Tylok Standard

CBC-Lok®

CS-Lok®

PIPE FITTINGS

WELD FITTINGS

BALL VALVES

• Ty-Flo® HP Series

• Ty-Flo® 3 Piece

NEEDLE VALVES

MANIFOLDS

FLEXIBLE METAL HOSE


[email protected]

www.tylok.comCS-Lok Tube Fittings Catalog Doc. 72318 Rev. D

1061 East 260th Street • Euclid, Ohio 44132Tel: (216) 261-7310 • 1-800-321-0466 • Fax: (216) [email protected] • www.tylok.com

Doc. 72321 Rev. C

TY-FLO HP Series Ball Valves

Lock-Out Device

A lock-out device allows the user to lock the valve in either the fully opened or fully closed position.

Lock-Out devices are available factory installed only.

Add the suffix -LD to the ordering number.Example: SS-6-DTT-6-6-K-LD

How to orderHow to Order TY-FLO HP Series Ball ValvesHow to Order TY-FLO HP Series Ball Valves

SS - 8 - D FT - 8 - 6 - K

TY-Flo HP Series Ball Valves are ordered as listed in this catalog by inserting the material code before the part number. TY-Flo HP Series Ball Valves can be identified through the part number as to material, valve series, style, valve configurations, port size, and seat material. The part number describes a complete ball valve assembly. Special configurations available upon request.

Example: A 5000 PSI Stainless Steel ball valve, 0.375" orifice, with a 1/2" female NPT end connection for port A and a 3/8" CBC-Lok end connection for port B and PCTFE seats, is designated as follows.

Material Valve Series Style Port A / Port B Port A / Port B Size Seat Chart 1 Chart 2 Chart 3 Chart 4 Chart 5 Chart 6

Chart 1 - Material SS Stainless Steel B Brass

Chart 2 - Valve Series 4 0.188” Orifice 6 0.250” Orifice 8 0.375” Orifice

Chart 3 - Style D CBC-Lok S CS-Lok 1 Tylok Standard

Chart 4 - Valve Configuration Type Port A Port B TT Tube Tube MM* Male NPT Male NPT FF* Female NPT Female NPT MF* Male NPT Female NPT FM* Female NPT Male NPT TM Tube Male NPT MT Male NPT Tube TF Tube Female NPT FT Female NPT Tube

*Use Style 1 from chart 3 for this type of configuration.

Chart 5 - Port Size Designator Tube OD (Inches) Pipe Thread (NPT) 2 1/8" 1/8-27 4 1/4" 1/4-18 6 3/8" 3/8-18 8 1/2" 1/2-14 12 3/4" 3/4-14See dimension chart for available sizes.

Chart 6 - Seat T PTFE (Teflon) K PCTFE

OptionsHandles

Assembled standard with Black handle. For other colors add the designator as a suffix to the ordering number.

Example: SS-6-DTT-6-6-K-BL Handle Color Designator RED -RD BLUE -BL GREEN -GR ORANGE -OG YELLOW -YW

Example: B-4-DTT-4-4-TDesignates a 1500 PSI Brass ball valve, 0.188" orifice, with 1/4" CBC-Lok end connections and teflon seats.Example: SS-6-1FF-6-4-KDesignates a 5000 PSI Stainless Steel ball valve, 0.250" orifice, with a 3/8" female NPT end connection for port A and a 1/4" female NPT end connection for port B and KEL-F seats.

•Reliable, simple operation for on-off service

•Fast acting, one quarter turn fully opens or closes the valve

•Maximum performance, straight through flow for minimum turbulence and pressure drop

•Positive leak tight shut off, even with fluctuating pressures

•Panel mounting capabilities standard

•Bi-Directional Flow

•Handle direction indicates position of valve and flow direction

•Micro finished ball provides positive seal

•Free floating ball design compensates for seat wear

•Available in CBC-Lok®, CS-Lok®, or Tylok Standard tube fittings and NPT pipe end connections

•Available in 316 Stainless Steel and Brass construction

Design/Features

tylokTY-FLO HP Series Ball ValvesTY-FLO HP Series Ball Valves

Stainless Steel Brass PTFE PCTFE PTFE PCTFESPECIFICATIONS

*For tubing and pipe fitting working pressures see CBC-Lok, CS-Lok or Tylok Standard catalogs.

3For Orders and Information 1-800-321-0466 • Visit Us Online at www.tylok.com2 For Orders and Information 1-800-321-0466 • Visit Us Online at www.tylok.com

Materials of Construction

tylokTY-FLO HP Series Ball ValvesTY-FLO HP Series Ball Valves

Valve Dimension Table

Dimensions shown with CBC-Lok® and CS-Lok® nuts finger-tight. Dimensions shown are for reference only, subject to change.

* Reduced Port

S

erie

s 8

Ser

ies

6 S

erie

s 4

4-DTT-2-2* 1/8" CBC-Lok 4-STT-2-2* 1/8" CS-Lok 4-DTT-4-4 1/4" CBC-Lok 4-STT-4-4 1/4" CS-Lok 4-1FF-2-2 1/8" Female NPT

0.188 (4.8)

4-1FF-4-4 1/4" Female NPT 4-1MM-2-2 1/8" Male NPT 4-1MM-4-4 1/4" Male NPT 6-DTT-4-4* 1/4" CBC-Lok 6-STT-4-4* 1/4" CS-Lok 6-DTT-6-6 3/8" CBC-Lok 6-STT-6-6 3/8" CS-Lok 6-DTT-8-8 1/2" CBC-Lok 6-STT-8-8 1/2" CS-Lok 6-1FF-4-4 1/4" Female NPT

0.250 (6.4)

6-1FF-6-6 3/8" Female NPT 6-1FF-8-8 1/2" Female NPT 6-1MM-4-4 1/4" Male NPT 6-1MM-6-6 3/8" Male NPT 6-1MM-8-8 1/2" Male NPT 8-DTT-6-6* 3/8" CBC-Lok 8-STT-6-6* 3/8" CS-Lok 8-DTT-8-8 1/2" CBC-Lok 8-STT-8-8 1/2" CS-Lok 8-DTT-12-12 3/4" CBC-Lok 8-STT-12-12 3/4" CS-Lok 0.375 (9.5)8-1FF-6-6 3/8" Female NPT 8-1FF-8-8 1/2" Female NPT 8-1FF-12-12 3/4" Female NPT 8-1MM-6-6 3/8" Male NPT 8-1MM-8-8 1/2" Male NPT

1.54 1.54

1.63 1.63

1.21 1.21 1.46 1.46 1.30 1.30 1.49 1.49

1.65 1.65

1.71 1.71

1.83 1.83

1.51 1.51

1.70 1.70

1.51 1.51

1.70 1.70

1.85 1.85

1.96 1.96

1.97 1.97

1.61 1.61 1.78 1.78 1.90 1.90 1.65 1.65 1.84 1.84

0.59 0.47 0.38 1.50 1.37 0.75

0.58 0.25

0.56 1.69 1.37 0.75 0.50 0.25

0.61 0.13

0.58 0.25

0.65

0.81 0.66 2.00 1.56 0.88

0.72

0.65

BASIC PArT CONNECTION OrIFICE DImENSIONS (INCHES) NumBEr POrT A POrT B INCH (mm) A B C D E F G PANEL HOLE

# Component Stainless Brass Steel 1 Handle Polypropylene

2 Screw Stainless Steel

3 Gland Nut 316 SS Brass

4 Stem Washer Nylat

5 Stem 316 Stainless Steel

6 Stem Back-Up Ring PTFE

7 Stem O-Ring Viton

8 Panel Lock Nut 316 SS Brass

9 Body CF8M/A351 Brass

10 Ball 316 Stainless Steel

11 Seat PTFE, PCTFE

12 End Connector O-Ring Viton

13 End Connector 316 SS Brass

Part Number Shown:SS-6-DTT-6-6-K

Pressure Rating* 1500 psig 5000 psig 1500 psig 3000 psig (103 bar) (344 bar) (103 bar) (206 bar)

Temperature Rating 0 to 400º F -300 to 300º F 0 to 400º F -300 to 300º F (-18 to 204º C) (-148 to 149º C) (-18 to 204º C) (-148 to 149º C)

POrTA

POrTB

CBC-Lok® double ferrule tube ends are completely interchangeable with Swagelok® and Parker A-Lok® tube ends.

CS-Lok® single ferrule tube ends are completely interchangeable with Parker CPI® tube ends.


Doc. 72321 Rev. C

TY-FLO HP Series Ball Valves

Lock-Out Device

A lock-out device allows the user to lock the valve in either the fully opened or fully closed position.

Lock-Out devices are available factory installed only.

Add the suffix -LD to the ordering number.Example: SS-6-DTT-6-6-K-LD

How to orderHow to Order TY-FLO HP Series Ball ValvesHow to Order TY-FLO HP Series Ball Valves

SS - 8 - D FT - 8 - 6 - K

TY-Flo HP Series Ball Valves are ordered as listed in this catalog by inserting the material code before the part number. TY-Flo HP Series Ball Valves can be identified through the part number as to material, valve series, style, valve configurations, port size, and seat material. The part number describes a complete ball valve assembly. Special configurations available upon request.

Example: A 5000 PSI Stainless Steel ball valve, 0.375" orifice, with a 1/2" female NPT end connection for port A and a 3/8" CBC-Lok end connection for port B and PCTFE seats, is designated as follows.

Material Valve Series Style Port A / Port B Port A / Port B Size Seat Chart 1 Chart 2 Chart 3 Chart 4 Chart 5 Chart 6

Chart 1 - Material SS Stainless Steel B Brass

Chart 2 - Valve Series 4 0.188” Orifice 6 0.250” Orifice 8 0.375” Orifice

Chart 3 - Style D CBC-Lok S CS-Lok 1 Tylok Standard

Chart 4 - Valve Configuration Type Port A Port B TT Tube Tube MM* Male NPT Male NPT FF* Female NPT Female NPT MF* Male NPT Female NPT FM* Female NPT Male NPT TM Tube Male NPT MT Male NPT Tube TF Tube Female NPT FT Female NPT Tube

*Use Style 1 from chart 3 for this type of configuration.

Chart 5 - Port Size Designator Tube OD (Inches) Pipe Thread (NPT) 2 1/8" 1/8-27 4 1/4" 1/4-18 6 3/8" 3/8-18 8 1/2" 1/2-14 12 3/4" 3/4-14See dimension chart for available sizes.

Chart 6 - Seat T PTFE (Teflon) K PCTFE

OptionsHandles

Assembled standard with Black handle. For other colors add the designator as a suffix to the ordering number.

Example: SS-6-DTT-6-6-K-BL Handle Color Designator RED -RD BLUE -BL GREEN -GR ORANGE -OG YELLOW -YW

Example: B-4-DTT-4-4-TDesignates a 1500 PSI Brass ball valve, 0.188" orifice, with 1/4" CBC-Lok end connections and teflon seats.Example: SS-6-1FF-6-4-KDesignates a 5000 PSI Stainless Steel ball valve, 0.250" orifice, with a 3/8" female NPT end connection for port A and a 1/4" female NPT end connection for port B and KEL-F seats.

Instrumentation Tubing

Instrumentation TubingFractional Sizes

For the best in stainless steel instrumentation tubing, turn to Tylok. We offer the quality, reliability and value you trust, for over fifty years.

Tylok offers all types of stainless steel instrumentation tubing, ensuring accurate, straight and distortion free cut length to the tolerances you require.

Tylok’s stainless steel tubing is the perfect compliment to our CBC-Lok® & CS-Lok® tube fitting offering.

Fitting LinesCBC-Lok® double ferrule fittings are completely interchangeable with tube fittings of Swagelok® and Parker A-Lok®.

CS-Lok® single ferrule tube fittings are completely interchangeable with tube fittings of Parker CPI®.


Canadian Registration

CUSTOMER CAREAt Tylok, we strive for total satisfaction of our Customers. Your inquires will be responded to within 24 hours. Our team features a knowledgeable staff to answer your questions quickly. We have the ability to make special items for you at a reasonable price, with fast delivery. Fast delivery is key to your success. Realizing this, delivery is constantly being measured via our ISO 9001:9002 Quality Management System. Our goal is to ship all products from stock to keep you running.


HOW TO ORDERHow To Order

*Cold Drawn Seamless Tube, A&P Polished, ASTM A269/A213

Doc. 72326 Rev. B


Part No. Outside Wall Type Nominal Material Diameter Thickness Length Standard (inches) (inches) (feet)

4-T-035-S-304/L-A269 Seamless 4-T-035-W-304/L-A269

.035 Welded

4-T-035-S-316/L-A269 Seamless 4-T-035-W-316/L-A269 Welded

4-T-049-S-304/L-A269 Seamless 4-T-049-W-304/L-A269 1/4

0.049 Welded



0.065 Welded



0.035 Welded


6-T-049-S-304/L-A269 Seamless 20 A269* 6-T-049-W-304/L-A269 3/8

0.049 Welded

6-T-049-S-316/L-A269 Seamless 6-T-049-W-316/L-A269 Welded 6-T-065-S-304/L-A269 Seamless 6-T-065-W-304/L-A269

0.065 Welded



0.035 Welded


8-T-049-S-304/L-A269 Seamless 8-T-049-W-304/L-A269 1/2

0.049 Welded



0.065 Welded


ty-flo needle valves

Documents