työkalut binder10

10. Tools

1-component guns PI1 22-component guns PI2 4Cable Fixer CFR 5Clamp Bands KLB 6MBX - MBX Rubber Brush MBX 7Manometers MAN 9Mixing Tips MIT 10Multi Staple Repair MSR 11Multi-Plug MUP 12Multistrip Detect MDC 13Nova-Boot - Nova-Boot Big NBT 14Novadrill DRL 15Novaflame Multi Torch NMT 16Nozzles SPM 17Other VAR 18Papertool PPT 20Pliers & brushes TAB 21ProKey PKE 23Safety Scraper SAS 24Safety Seal SFS 25Safety Seal Plus SFP 26Swabeez SWA 27Taps & Pumps KPO 28Triggers TRI 30Wire saw DRZ 31

www.novatio.com 10.1

10. Tools

1-component gunsSilgrease gun 75 ml

Article nr Section

201901000 Tools

Seal & Bond Gun sausage 310 ml - 12:1

Article nr Section

315400000 Tools

Mastergun Complete kit

Article nr Section

316510000 Tools

Seal & Bond Gun 310 ml - 12:1

Article nr Section

315100000 Tools

Seal & Bond Gun sausage 310ml - 18:1

Article nr Section

315401000 Tools

Seal & Bond Gun sausage 600ml - 18:1

Article nr Section

315500000 Tools

Seal & Bond Gun 310ml - 18:1

Article nr Section

315101000 Tools

Pro Foam gun

Article nr Section

670903000 Tools

Seal & Bond Gun sausage 310 ml - 25:1

Article nr Section

315402000 Tools

10.2 www.novatio.com V0.0

10. Tools

1-component gunsSeal & Bond Gun sausage 600 ml - 12:1

Article nr Section

315600000 Tools

Foam Gun

Article nr Section

670902000 Tools

Pneumatic Gun MK5 310 ml

Article nr Section

316000000 Tools

Mastergun

Article nr Section

316510000 Tools

Pneumatic Gun MK5 600 ml

Article nr Section

315520000 Tools

V0.0 www.novatio.com 10.3

10. Tools

2-component gunsQ-Fix 120 380 ml gun

Article nr Section

316600000 Tools

Mixing Gun for Auto-Bond / Nova PowerGrip / Quick-Bond 2 x 100 ml

Article nr Section

591901000 Tools

Megaplast PPE mixing gun 1/10 1/1

Article nr Section

593900000 Tools

Novabond 2 mixing gun 2 x 300 ml

Article nr Section

529401000 Tools

Pneumatisch 2-component gun

Article nr Section

599001000 Tools

Megaplast PPE plunger

Article nr Section

593930000 Tools

Pneumatic gun Novabond 2 x 300 ml

Article nr Section

529404000 Tools

Mixing gun 2 x 25 ml

Article nr Section

593901000 Tools


10. Tools

Cable Fixer CFR

QUICK AND EFFICIENT BUNDLING

• Always the right length without any

waste.

• Easy to apply: wind the band around

the object, tighten, click, ready

• Stretching and cutting in one act.

• Easy to reload.

• Always the right size in stock. Bundles

from 3 mm to 20 meter.

• No more band lying around.

• High quality synthetic band: resistant

to U.V. and most chemicals.

• Can be used everywhere - ideal for

working on "relocations".

General information

CABLE FIXER is a handy tool for bundlingand fixing. Due to the continuous band rolls,you can bundle lengths between 3 mm and15 m, without any waste or loss.CABLE FIXER automatically applies

the stop clip and at the same time cuts theband at the right length in one movementwithout any loss. With CABLE FIXER yousave time and stock.

Technical information and packaging

Band width: 4.6 mm.Band length: rolls of 15 and 100 m.Material UV-resistant polyamide 6.6.Colour: black.Tensile strength: 250 N.Temperature resistance: -40°C to +105°C.Chemical resistance: resistant to oilderivatives, acids, lyes, UV and temperatureinfluences.

Specific weight: 1.14.E-Modulus: 2000 N/mm².Clips: on handy load strips, 20 pieces perload.

Applications and use

• fixing of cables inside and outside• bundling and fixing of wires, cables, hosesin installations, machines, cars, motorbikes,bicycles, boats, etc.

• closing of bags binding up of plants• hi-fi and computer cables• bundling of packages

Product references

Article nr Name Content Section

850200000 Cable Fixer 1 Tools

850220000 Cable Fixer band black15 m 1 Tools

850150000 Cable Fixer clips black 200 Tools

850170000 Cable Fixer replacement knife 1 Tools

850180000 Cable Fixer protection plate Tools


10. Tools

Clamp BandsNova-Boot clamp 800mmx8mm

Article nr Section

388955000 Tools

Nova-Boot universal clamp 420mmx7mm

Article nr Section

388953000 Tools

Ligarex Banding Tool 10 mm

Article nr Section

388956000 Tools

Nova-Boot clamp 300mmx6mm

Article nr Section

388957000 Tools

Mounting tool for clamp bands

Article nr Section

388958000 Tools

Nova-Boot clamp 300mmx8mm

Article nr Section

388954000 Tools

Nova-Boot universal clamp 170mmx7mm

Article nr Section

388952000 Tools


10. Tools

MBX - MBX Rubber Brush MBX

REMOVE GLUE RESIDUES SAFELYAND FAST

• Sand-blast effect thanks to the unique

folded, polished and hardened spring

steel.

• The flexible arrangement of the steel

wires makes it possible to process all

shapes.

• Maximum flexibility, MBX band

carried on air cushion.

• Ideal running speed due to special

reduction system, 3500 rpm without

loss of power.

• Safe construction.

• RUBBER BRUSH for simple fast

removal of glue residue.

General information

MBX bands are made of high qualitypolyamide fabric with a tensile strength of upto 440 kg. The spring steel wires areanchored in a U shape. This product offersoptimum flexibility. Safety and life span: nosatiation, heating or polishing necessary.

MBX RUBBER BRUSH makes it possible toremove glue residues safely and quickly.MBX RUBBER BRUSH is made up of thelatest high-tech polymers and has a longlifespan.


COARSE: 0.7 mm spring steel, bent, polishedand hardened.Coarse sand blast effect.Removal of undercoating and sealingcement.MEDIUM: 0.5 mm spring steel, bent, polished

and hardened. Fine sand blast effect.Removal of paint and rust.FINE: 0.5 mm spring steel, straight. No sandblast effect. Removal of packaging.


BODYWORK• removal of undercoating (coarse)• removal of sealing materials (cements -coarse)• removal of paint (fine)• removal of rust (medium)• removal of glue residue• no heating of the surface• no satiation or spreading out• does not remove any healthy material, nogrinding effect (fine)• removes glue residues from decorativestrips, spoilers and emblems (RUBBERBRUSH)• removal of lettering on bodywork (RUBBERBRUSH)

MECHANICAL• removal of packaging (fine)• removal of rust (medium)• removal of paint (fine)• cleaning of parts (fine)• cleaning of aluminium (fine) roughening ofvarious materials before glue application

INDUSTRY• removal of rust from metal surfaces(coarse)• removal of paint and contamination ofstone and wood (medium fine)

• removal of glue residues from varioussurfaces (medium)• roughening of various materials for gluing(fine)• removal of cement residues from tools(medium)• cleaning or rust removal on difficultsurfaces, fencing, pipes and corners• cleaning of aluminium (fine)• sand blast effect without sand blastinstallation (coarse)• does not remove any healthy material nogrinding effect• removal of lettering (RUBBER BRUSH)• removal of hardened silicones (RUBBERBRUSH)• removal of hardened cement onconstruction equipment (shovel, spade,trowel, spirit level,...) (medium and coarse)• removal of chalk deposit (RUBBER BRUSH)• removal of discoloration of stainless steelwelding seams (RVS)


10. Tools

MBX - MBX Rubber Brush MBX

Product references


356101000 MBX Machine, pneumatic 1 Tools

356145000 MBX replacement adapter without axle 1 Tools

356000000 MBX Adapter six-sided axle, use indrilling machine 1 Tools

356190000 MBX Adapter narrow Tools

356001000 MBX Adapter six-sided, twisted-off axle6mm 1 Tools

356121000 MBX Band beige - width: 11mm Tools

356110000 MBX Band, coarse, black 10, 20 of 30 Tools

356131000 MBX Band green - width: 11mm Tools

356120000 MBX Band, medium, beige 10, 20 of 30 Tools

356130000 MBX Band, fine, green 10, 20 of 30 Tools

356135000 MBX Band Inox 1 Tools

356140000 MBX Rubber Brush 1 Tools


10. Tools

ManometersNovairco Digi-manometer

Article nr Section

744008000 Tools

Novairco-Refill Manometer

Article nr Section

744004000 Tools

Novairco koppelstuk

Article nr Section

744007000 Tools

Novairco professional manometer

Article nr Section

744006000 Tools


10. Tools

Mixing TipsMegaplast MM / PPE / PU Mixing tips

Article nr Section

597902000 Tools

QFX / NB2

Article nr Section

610191000 Tools

Mixing tips

Article nr Section

529403000 Tools

Mixing tips NPG 2-K

Article nr Section

590906000 Tools

Mixertips NPG / NB2 / MS50 2-K / ABD-QBD

Article nr Section

590902000 Tools

NPG 2K extension tube

Article nr Section

590906012 Tools


10. Tools

Multi Staple Repair MSR

STRUCTURAL REPAIR ANDMOUNTING OF ALL SYNTHETICMATERIALS

• For all synthetic materials – so

identifying them is unnecessary.

• Also for all difficult plastics, such as

polyethylene, polypropylene and

blends of these.

• Fast and effective.

• Without auxiliary products – no

primers, no cleaning agents, no

preparation.

• Also ideal for repairing and

strengthening supporting and

mounting points.

General information

The MULTI STAPLE REPAIR is a mechanicalrepair method for plastics. This strongstructural repair retains the flexibility neededto re-mount the component. The MULTISTAPLE REPAIR appliance warms the"staples" in order to embed them in thematerial to be repaired. The OEM strength ofthe product is unchanged because no otherproduct has been added.

Three types of staples ensure a comfortableand effective repair. The staples are availablein two versions – the standard model and thePre Cut Staple. The latter has a breakingpoint so that the staples break off in theplastic. The gun of the MULTI STAPLEREPAIR inserts the staples vertically or at anangle of 90° for hard-to-reach places.


Supply voltage: 230 V - 50/60 Hz.Max. power: 35 W.Do not use on fibre-reinforced plasticsDimensions: 165x87x65 mm.Absorption maxima: 160 Ma.

Two 400 mA fuses.Weight: 1.350 kg.Safety measures: please consult the safetycard.


• connect the apparatus to the mains;• Move the button to the desired position:- LED light on green = minimum position forplastic up to 1.5 mm thick;- LED light on yellow = medium for plasticbetween 1.5 and 2.5 mm thick;- LED light on red = maximum position forplastic more than 2.5 mm thick;• select the appropriate staple from the tablebelow and place it in the relevant openings inthe gun (on the 90° head, depending on theapplication);• place the head of the staple on the desiredplace of the plastic to be repaired and pressthe start button of the gun;

• the heat melts the plastic and the staplesinks into the material;• turn the gun softly 5° to embed the staple inthe plastic and release the start button. Allowthe staple to cool before withdrawing thegun;• depending on the type of staple used, cutor break off the protruding ends;• place enough staples to form a sufficientlystrong join.

Product references


360500000 Multi Staple Repair 1 pcs Tools

360520000 Staple 0.6 mm V-form 100 pcs Tools

360521000 Staple 0.6 mm spiral small 100 pcs Tools

360522000 Staple 0.6 mm spiral large 100 pcs Tools

360510000 Pre-cut staple angle 0.7 mm 100 pcs Tools

360511000 Pre-cut staple spiral small 0.7 mm 100 pcs Tools

360512000 Pre-cut staple spiral large 0.7 mm 100 pcs Tools


10. Tools

Multi-Plug MUP

HIGH QUALITATIVE ANCHOR PLUGSWITH BUILT-IN HARPOON HOOKS

• Ideal for anchoring in hollow blocks.

• Only 2 sizes for most diameters.

• With harpoon hooks for extra

anchoring.

• No waste of product.

• The length of the plugs is fast and

easy adjustable.

General information

MULTI-PLUG is a high quality anchor plugwith built-in harpoon hooks.MULTI-PLUG is very appropriate

for anchoring in hollow blocks. Most diamterscan be covered with only 2 sizes.


MULTI-PLUG 13mm:- for bolts and spindles with a 6 -11 mmdiameter- for drill holes with a 13 -16 mm diameter

MULTI-PLUG 15mm:- for bolts and spindles with a 10 -13 mmdiameter- for drill holes with a 15-18 mm diameter


anchoring in hollow blocksSpindle Nova Nova Megaplast. Power Power PU/MM. Grip 2-K Grip. 250 ml 200 ml 50 mlM10 15-16 11-12 1-2M 8 14-15 10-11 1M 6 13-15 9-11 1

Spindle Nova Nova Megaplast. Power Power PU/MM. Grip 2-K Grip. 250 ml 200 ml 50 mlM10 8-10 7-9 1M 8 8-9 6-8 0.5-1M 6 7-9 5-7 0.5-1

Product references


591833000 Multi-Plug 13 mm 50 Tools

591835000 Multi-Plug 15 mm 50 Tools


10. Tools

Multistrip Detect MDC

STRIPPER KNIFE WITH BUILT-INVOLTAGE DETECTOR FORACCURATE, SAFE AND FASTSTRIPPING

• Suitable for all standard round cables

of 4 mm to 28 mm.

• The cutting depth can be adjested via

the adjusting screw whereby the inner

conductors can be avoided.

• Stripping can be done lengthwise or

around the wire thanks to the high

quality, self turning knife.

General information

MULTISTRIP DETECT is a cable and wirestripper knife with a built-in voltage detectorthat can spot voltages from 50V till 600V andthis without direct contact with the innerconductors. The cutting depth can beaccurately adjusted by the adjusting screwwhereby possible damage to the innerconductor can be avoided.

The build-in voltage detector can detectcable separations, hidden wires and eveninterruptions in the voltage range.MULTISTRIP DETECT strips cable of 4 mm to28 mm round as well as lengthwise.


Detection range: 50 - 600V.Readout:- Voltage = light on- no voltage = no lightFrequency range: 50 - 600 Hz.Battery: 2 x 1.5 V button cell battery.

Temperature range: 0°C - 40°C.Detects through: wood, bricks, cellularconcrete.


• to retrieve built-in or hidden electric cables,branch boxes, transformers and applianceswith voltage• to find flaws in extension cords• fastens the testing of bifilar light switches• to find hidden branchboxes, branchpoints, ...STRIPPINGOpen the valve and insert the cable. Pressthe cable against the swivel-vlade and closethe valve.Turn 1 or 2 times.Cut lengthwise and strip the cover.Adjust the cutting depth by turning the screwon the bottom of the grip.The stripping range: 4mm to 28mmTESTActivate the voltage detector by pressing theON/OFF button (for 3 seconds).

When the LED lights flash the MultistripDetect is ready for use.In the vicinity of dangerous current changingfrom 50V to 600V the LED light will flashquickly.The voltage detector switches offautomatically after 10 minutes.By keeping th ON/OFF button pressed thevoltmeter switches off.REPLACE BATTERIESIf the voltage detector does not give a signal,the batteries need to be replaced. Open thedevice with the screwdriver and remove thebattery unit. Replace the old batteries by newones type LR44 1.5V taking the polarity intoaccount. Insert the battery unit back in thegrip.

Product references


861010000 Multistrip Detect 1 Tools


10. Tools

Nova-Boot - Nova-Boot Big NBT

UNIVERSAL CONSTANT VELOCITYJOINT BOOT

• One single type of boot for 98% of the

fleet.

• Extra gain of time due to quick and

easy installation.

• Supplied with special lubricating

grease and clamps.

• For both inside and outside

homokinetics.

• Very flexible neoprene rubber -

exceeds the manufacturer's

specifications.

• Stainless steel clamps for a perfect

fixing.

• Accurate fit and "original" look.

• Always the right boot in stock.

General information

NOVA-BOOT is the newest universal cardansleeve, manufactured from the highest qualityneoprene.

NOVA BOOT is completely adapted to themost difficult cardan types.


Inject the NOVA-BOOT assembly cone withNOVA-BOOT LUBE and place it on theground.Press the arms of the NOVA-BOOT assemblytogether and shove the broad end of theNOVA-BOOT over the 2 clamping brackets.Important: before assembling a sleeve on acoupling on the gearbox, read theinstructions at the end.Press in the small upper end of NOVA-BOOTand inject this abundantly with NOVA-BOOTLUBE.Turn the assembly tools with NOVA-BOOTaround and place this centrally on theassembly cone.

Push the assembly tool with the boot in anuninterrupted and powerful movementdownwards.Slide the entire unit over the cardan head andpress the sleeve into its position.Give a brief tap on the base of the assemblyequipment to remove the cone andequipment.Apply the associated grease to the couplingand put the boot in its positionFasten the sleeve with the tensioning bands.

Product references


388700000 Nova-Boot Set New set (12 stuks) Tools

388959000 Nova-Boot universal clamp800mmx5mm 12 pcs Tools

388950000 Nova-Boot Cone, cone diam. 100mm Tools

388706000 Nova-Boot Set New Tools

389954000 Nova-Boot Tool 1 Tools

388981000 Nova-Boot Lube 400 ml Tools

389810000 Nova-Boot universal steering wheel set (2 stuks) Tools

389800000 Nova-Boot Wheelhouse axle cover Tools

388954000 Nova-Boot clamp 300mmx8mm 24, 48, 96 of 120 Tools

388955000 Nova-Boot clamp 800mmx8mm 24, 48, 96 of 120 Tools

388957000 Nova-Boot clamp 300mmx6mm 12 Tools

388952000 Nova-Boot universal clamp170mmx7mm 24, 48, 96 of 120 Tools

388953000 Nova-Boot universal clamp420mmx7mm 24, 48, 96 of 120 Tools


10. Tools

Novadrill DRL

UNIQUE COBALT DRILL BIT WITHSPLIT POINT

• Very high toughness reduces breaking

to a minimum.

• Up to 10x longer cutting life.

• No centre punching - not even on

curved surfaces.

• Optimal heat and chip removal due to

deep helix.

• Less temperature development due to

cobalt alloy.

• Especially suitable for drilling hard

alloy steels and stainless steel.

• Very effective in the removal of broken

screws, bolts, studs and socket

screws.

General information

NOVADRILL is an H.S.S. Co spiral drill bitaccording to DIN 388 Type N.NOVADRILL has a cylindrical shank with splitpoint (from dia 2,5 mm to dia 13 mm).The top angle is 133°.NOVADRILL is especially appropriate

for mental removal of hard to dress metaltypes. Safety measures: consult the SafetyData Sheet.

Product references

Article nr Name

325010000 Novadrill 1 mm 34 mm 12 mm

325015000 Novadrill 1,5 mm 40 mm 18 mm


325025000 Novadrill 2.5 mm 58 mm 30 mm






















325001000 Novadrill assortment . 1mm - 10 mm (19)

325005000Novadrill Cobalt drill bitassortment for tapmeasurements

. M3 tem M14 (9 stuks)


325002000 Novadrill assortment . 1mm - 13 mm (25)





326808000 Novadrill spotweld 8 mm 80 mm 38 mm




10. Tools

Novaflame Multi Torch NMT

MULTIFUNCTIONAL TOOL FOR THEPROFESSIONAL

• Handy 5 in 1 tool: cut and melt,

solder, connect and heat, with or

without a flame.

• Wireless, so autonomous.

• With a thermal regulation.

• Automatic feed shut-off when using

the cap

• Ideal for repairing printed circuit-

boards, cable bundles, and also to

facilitate the cutting and repair of PS,

PP, PE, PTFE,...

General information

The professional hot air blower, solderingbolt, torch,... for the specialist, 5 functions in1.


Length: with sealing cap: 233 mm; withsoldering bit: 215 mm.Weight: 142 g.Temperatures: soldering bit: 250-500°C;torch: 1300°C; hot knife: 200-350°C; hot airblower: 250-500°C.

Volume of gas: 20 ml.Working time: 120 min with normal use.


5 FUNCTIONS IN 1Hot air blower: by using the replaceable hotair head, you can heat and fold plasticswithout damaging them.The hot air head is also a very practicalinstrument when soldering the Duoflux andTopflux connectors without any connectiondamage to the surrounding cables.Also shrink-sleeves like Thermoflux shrinkeasily with this hot air current.Deflector: for very temperature-sensitivebackgrounds, you can use the deflector toreflect the hot air, like e.g. with calbebundles.

Soldering bolt: in the set you will find 2replaceable soldering bits of differentdimensions.Torch: with the torch shape NOVAFLAMEMULTI TORCH can be used to loosen smallfixed bolts and nuts by heating them.Hot knife: the hot cutting knife can be used tocut polystyrene plates, nylon nets, canvas,...in the most difficult shapes.

Product references


360400000 Novaflame Multi Torch set Tools

360401000 Novaflame Multi Torch refill 6 pcs Tools

360411000 Novaflame Multi Torch soldering bitround 1,6mm 1 Tools

360412000 Novaflame Multi Torch soldering bitround 3,2mm 1 Tools

360413000 Novaflame Multi Torch soldering bit flat2,4mm 1 Tools

360414000 Novaflame Multi Torch soldering bit flat3,2mm Tools

360415000 Novaflame Multi Torch soldering bit flatand inclined 2,4mm 1 Tools

360416000 Novaflame Multi Torch soldering bit flatand inclined 3,2mm 1 Tools

360417000 Novaflame Multi Torch soldering knife 1 Tools

360418000 Novaflame Multi Torch hot air blower 1 Tools

360419000 Novaflame Multi Torch Deflector 1 Tools


10. Tools

NozzlesNozzl narrow (0,8 -1,2)cm

Article nr Section

599516000 Tools

360° rotating nozzle

Article nr Section

599422000 Tools

Needle adapter nozzle for MS Construct

Article nr Section

599307003 Tools

Nozzle width 2 cm

Article nr Section

599515000 Tools

Nozzle adapter

Article nr Section

599309000 Tools

V-nozzle for MS Construct with needleadapter

Article nr Section

599307004 Tools

Nozzle for Mastergun

Article nr Section

599517000 Tools

Hersluitbare transparante spuitmond

Article nr Section

599411000 Tools

V-nozzle for MS Screen

Article nr Section

599518000 Tools


työkalut binder10

Documents

band length

component guns pi2

tools1component guns

right length

cable fixer yousave

continuous band rolls

general informationcable

toolscable fixer cfrquick