type c - seals for industry – tobar seals, o-rings, oil
TRANSCRIPT
6
3
Type
s of
Tob
ar O
il S
eals
standardoil seals
A
CA
SE
AN
D O
.D. S
TR
UC
TU
RE
Typ
e A
2Ty
pe
BTy
pe
CNote: Metal O.D. seals are supplied standard as stamped. In most cases, metal O.D. seals could be supplied with painted or ground O.D.’s.
Tobar, Inc.
LIP STYLE S T V K D
Single Lip Double Lip Single Lip (w/o spring) Double Lip (w/o spring) Two Spring Lips
7
oil seals 3
Types of Tobar Oil S
eals
specialapplications
BA
GR
ICU
LTU
RE
TY
PE
WW
IPE
R S
EA
L
The wiper series is used primarily in reciprocating applications as a dirt excluder. Our most popular wiper is the WPB style. The WPB series is normally produced with a ground O.D. and 90-durometer nitrile material.
The W series is used in applica-tions subject to wide variances in thermal expansion or for press fitting into a housing where installation is difficult.
The agricultural designs are multi-lipped pre-lubed seals used in conjunction with wear sleeves to prevent dirt from entering the system.
This series is to be used for large shaft to bore misalignment or excessive dynamic run-out.
Tobar, Inc.
LIP STYLE
OTHER DESIGNS
CA
SE
AN
D O
.D. S
TR
UC
TU
RE
8
3
Type
s of
Tob
ar O
il S
eals
specialapplications
BS
PE
CIA
L S
TR
UC
TU
RE
S
PR
ES
SU
RE
DE
SIG
NTy
pe
OLIP STYLE
OTHER DESIGNS
The O design is for applica-tions where the bore turns and the shaft is stationary.
The pressure seals are used in applications where pressure may range up to 1,422 PSI.
Tobar, Inc.
9
3
Types of Tobar Oil S
eals
B
The Type 3 design has a grease cavity and will allow for pre-lubrication of the seal. The second-ary lip will also allow for dirt exclusion.
The Type 4 design is used for lin-ear applica-tions.
specialapplications
Typ
e 5
Typ
e 4
Typ
e 3
The Type 5 design is designed for applications where addi-tional rigidity is needed and restricts the installa-tion depth into the housing.
LIP STYLEOTHER DESIGNS
Tobar, Inc.
CA
SE
AN
D O
.D. S
TR
UC
TU
RE
10
LIP STYLE3
Type
s of
Tob
ar O
il S
eals
B
CA
SE
AN
D O
.D. S
TR
UC
TU
RE
End
Co
ver
Sp
ecia
lTy
pe
7/9
Typ
e 6 The Type 6
design adds ease of installation and restricts the depth of installation.
The Type 7/9 design is used in heavy-duty applications where dirt exclusion and outside seal-ing is required.
specialapplications
The Special design allows for easy installation or replace-ment. It adds rigidity and restricts instal-lation.
The End Cover design pro-tects bearings from contami-nants.
Tobar, Inc.
11
3
Types of Tobar Oil S
eals
B
specialapplications
Tobar, Inc.
The Type Y design is used for special applications where the seal lip and spring need to extend beyond the case
Part metal/part rubber combines the installation advantages of rubber with the holding power of metal.
Various unique seals.
Axial CounterfaceSeals.
LIP STYLE
CA
SE
AN
D O
.D. S
TR
UC
TU
RE
A
xial
Co
unte
rfac
e
Uni
que
Sea
lsTy
pe
BC
Typ
e Y