Left one is without FI, and Right one has FI on its topThis is the Half Balad

These are the Full Blads.

Fans and IO modules + Power supply

Splitting the Ports on ASIC you can split the above ports in to Fiber and reserve below Ethernet.

From Management and Control Plan one FI will be active and other will be standby,and by Data transfer Plan (Fiber channel and Ethernet)both will be in forwarding modeGeneric Expansion Module they have there own sub operating system powersupplies, we can reboot GEM without Rebooting FI.

Wiring

With 210P old GEM we could not port channelingOne pair of Fiber Interconnect with forty Chassis.

VIC Card CNA it can Converges Fiber Channel in to Ethernet Protocol, VIC card is known as Virtual card because it has not its real physical ports it is itself FEX,

Six DDR3 RAM Slots

2 Processor Slot

Full Size Blades with two NIC cards

We should uplink 1,2,4 and 8 IO module uplink with FI.We can Send 1 VNIC traffic through both IO uplink to both FI

For Data Plane Control both FI are Active and ForwardingC-Series Rack Mount Servers as below