ul and iec / en combination course

2
UL and IEC / EN Combination Course 1-Day Workshop usa.siemens.com The Secrets of Industrial Control Panel Design Overview This is a must for those who want to get an update in the latest UL and IEC/EN standards. Participants will get a clear picture of basic differences between North American and the European markets (European Directives, the mandatory CE marking and obligations) as well as North American and European applications for industrial control panels. The course is a summary and a condensed version of a standard one day course on designing industrial control panels for the North American market and another one day course on designing industrial control panels according to international IEC/EN standards with the additional aspects and requirements of the European Directives and the CE mark. This course also covers the basic requirements to design and self-certify an industrial control panel with a CE marking for export to IEC countries and markets. Location: Siemens Industry, Inc. 10900 Wayzata Blvd. Room 206 Minnetonka, MN 55305 Date: Tuesday, June 5, 2018 Time: 9:00 a.m. – 3:00 p.m. Lunch will be provided. There is no cost to attend. For additional information, please contact: Ken McCleary E-mail: [email protected] Phone: 952.843.8334 CLICK HERE TO REGISTER NOW

Upload: others

Post on 06-Nov-2021

5 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: UL and IEC / EN Combination Course

UL and IEC / EN Combination Course1-Day Workshop

usa.siemens.com

The Secrets of Industrial Control Panel Design

Overview This is a must for those who want to get an update in the latest UL and IEC/EN standards. Participants will get a clear picture of basic differences between North American and the European markets (European Directives, the mandatory CE marking and obligations) as well as North American and European applications for industrial control panels. The course is a summary and a condensed version of a standard one day course on designing industrial control panels for the North American

market and another one day course on designing industrial control panels according to international IEC/EN standards with the additional aspects and requirements of the European Directives and the CE mark.

This course also covers the basic requirements to design and self-certify an industrial control panel with a CE marking for export to IEC countries and markets.

Location: Siemens Industry, Inc. 10900 Wayzata Blvd. Room 206 Minnetonka, MN 55305

Date: Tuesday, June 5, 2018

Time: 9:00 a.m. – 3:00 p.m.

Lunch will be provided.

There is no cost to attend.

For additional information, please contact:

Ken McCleary E-mail: [email protected] Phone: 952.843.8334

CLICK HERE TO REGISTER NOW

Page 2: UL and IEC / EN Combination Course

Siemens Industry, Inc.100 Technology Drive Alpharetta, GA 30005

1-800-365-8766 [email protected]

Subject to change without prior notice. All rights reserved Printed in the USA ©2018 Siemens Industry, Inc.

The technical data presented in this document is based on an actual case or on as-designed parameters, and therefore should not be relied upon for any specific application and does not constitute a performance guarantee for any projects. Actual results are dependent on variable conditions. Accordingly, Siemens does not make representations, warranties, or assurances as to the accuracy, currency or completeness of the content contained herein. If requested, we will provide specific technical data or specifications with respect to any customer’s particular applications. Our company is constantly involved in engineering and development. For that reason, we reserve the right to modify, at any time, the technology and product specifications contained herein.

What can you expect to learn from this class?

• An introduction and overview about the important standards for electrical control panel design

• Learn about standards specific to UL and IEC

• Learn about the UL508A standard for Industrial Control Panels

• Learn about the NFPA79 standard for Industrial Machinery

• Discuss the new IEC/EN 61439-1 standard for low-voltage switchgear and control gear assemblies

• Learn about the IEC/EN 60204-1 standard for electrical equipment of machines

• The latest changes and updates in the relevant standards for control panel design for the local, domestic market as well as for the international markets

Agenda

• Introduction: Seminar content and objectives

• Basic differences between North America and

Europe

• Overview on requirements in North America

per UL 508A requirements

- Codes, standards and organizations

- UL marks, terms and definitions

- SCCR – short circuit current ratings

- Motor branch circuits

- Protective measures according to UL/NFPA

for control panels

• Overview on requirements in Europe per

IEC 61439-1,2 requirements

- Introduction to European directives

- IEC and EN standards

- Required verifications for control panels

- Protective measures according to IEC/EN

for control panels

- CE marking and assessment procedure

• Helpful tools, efficient planning and

documentation

• Support and further information