ultipower 36v 10a automatic battery charger with desulfation

Nanjing UltiPower Electronic Technology Co.,Ltd BUILDING 5, 157 Zhuangpai Road, Nanjing, 211100 P.R. China

Tel:025 66622632 Fax:025 66622634 www.ultipower.cn

1 / 3

1

UltiPower 36V 10A Automatic Battery Charger

with Desulfation

Model：UBC-260-3610

Brand: UltiPower

Origin: Jiangsu, China

Specification:

UBC-260 36V10A

Input Voltage 110VAC OR 220VAC, 50-60HZ

Charging Voltage 44.1V, or adjust to battery's

specification

Charging Current 10A(MAX)

Ambient Temperature 0°C TO +40°C

Cooling fan cooling

Charger Type 8-step,full automatic switch

mode,(reverse) pulse charging

Appropriated Battery 36V lead acid battery,AGM,AGL,GEL

Battery Capacity 60-100AH

Dimensions 263*116*73mm

Weight 1.9kg



2 / 3

2

Main Features:

1. Compact & Delicate & Energy Saving -- Switch Mode Tech

Small and light, as we adopt the switch mode technology or called Switching Power Supply

technology. Compared with traditional Linear Power technology, ours is more energy saving

as more than 85% electric energy was transferred to battery chemical energy during charging

process while traditional tech can only transfer 40%. The tech is suitable for all types of lead

acid batteries (wet,flooded, maintenance free, VRLA, AGM, etc)

2. Automatic -- MCU system

MCU system is applied. The whole charging process is monitored. Multi-stage charging

automatically proceeds. No need for manual interference.

Automatically stops charging when the battery is full. You can leave the charger

connected to the battery indefinitely without the risk of overcharging. Once the battery is

full, the charger monitors the battery’s voltage intermittently. If battery capacity

decreases or voltage drops under set level, the charger can start again to charge battery to

its full. This restart function is set according to user’s requirement, not standard setting.

3. Multi-stage charging-- full charge but never overcharge

Max 8 stage: pre-charging, soft charging, main charging, secondary charging, high constant

voltage charging, 3-minute test, float charging, End maintenance charging.

This way can well transfer electricity into battery according to battery’s absorption ability.

On the one way, save energy; on the other way, protect battery from over-charging,

therefore less gassing or temperature rising. Float charging and End maintenance charging

also help protect battery and prolong its lifetime.

4. Recover Battery Capacity--Pulse & Reverse Pulse Tech

Pulse and reverse pulse technology is applied. The charger generates pulse and reverse

pulse to reduce battery impedance, gassing and temperature rise, restore the sulfate into

liquid to recover battery capacity, therefore to prolong its lifetime. Pulse charging also can

help charge fast and fully.



3 / 3

3

5. Digital Display and More Protection

Digital Display shows charging voltage and current and also errors if something wrong with

charger or battery. Floating charging will have time count-down, so that user knows when

battery can be ready.

Polarity Protection: Prevents the output leads from sparking due to accidental reverse

connection or short circuit.

Overcharge and Over-voltage Protection : never worry about overcharging or over-voltage

as charger automatically stops when battery reaches set voltage or current

High Temperature Protection: If charger itself gets to high temperature, it will

automatically lower down its temperature even stop working so that charger is well

protected.

6. Customization

We can change parameter to meet different applications. Make charger specifically for

your battery.

7. CE and RoHS Certification

We have CE and RoHS certification.

ultipower 36v 10a automatic battery charger with desulfation

Documents