ultro-pleat h high flow lter cartridge - brother filtration...ultro-h high flow housing brother high...
TRANSCRIPT
http://www.brotherltration.com
Ultro-Pleat H High Flow lter cartridge
Ultro-Pleat H High Flow lter cartridgeUltro-Pleat H High Flow lter cartridgeUltro-Pleat H high ow lter cartridge, especially
to replace 3M CUNO brand, has unique radial
pleat technology to bring us much more pleats
and larger effective ltration area.
Large diameter with high ow rate up to 500gpm
decrease needed number of lter elements. At
the same time, less maintenance cost in actual
operation.
Absolute rating and outside-in ow path enable
consistent ltration efciency.
Features & Benets High ow capacity up to 500gpm per cartridge
=> Reduced Filter Usage - minimizes product loss, labor
cost, disposal costs, operator exposure, and downtime
for lter change-out
Absolute rating
=> Reproducible efuent quality throughout the lter's life
Pleated type design
=> extend the usable lter serface area & dirty holding
capacity,extend longer life time
Supporting core design
=> enhance lter cartridge strength, easy to change
Easy to use
=> No special tools or hardware required for lter change-
out -minimizes downtime
=> Handle design - facilitates easy cartridge installation
and removal
Brother Filtration
Specications: Specication
Removing Ratings(Absolute) 1,2,5,10,15,25,40,70um
Diameter
Outside Diameter
Length
6inch/152mm
40inch/1016mm, 60inch/1524mm
Material of construction
Filter Media Polypropylene
Polypropylene
Glass Filled Polypropylene
Polypropylene
Buna-N rubber
Core Material
End Cap Material
Support layer Material
Gasket/O-ring Material
Operating Conditions
Maximum Operating Temperature
Maximum Flow Rate
Maximum Forward Differential Pressure
180 /82
300gpm/70m3/hr 500gpm/115m3/hr
0psid@68 (3.4bar @ 20 )
Ultro-Pleat Filter Cartridge Features
Code
ULP-P010
ULP-P020
ULP-P050
ULP-P100
ULP-P150
ULP-P400
Media
Polypropylene
Polypropylene
Polypropylene
Polypropylene
Polypropylene
Polypropylene
0.03
0.025
0.009
0.004
0.0025
0.002
Flow Factor * (Psid/gpm)
Typical Application: Municipal Water
RO Preltration
Reclaimed Water
Coolants
Bioler Condensate
Electronics Process Water
Pharmaceurical
Filter Comparison
1 HF cartridge lter
In a 8.6’’ diameter housing
18 standard diameter 2.5’’
pleated lter in a 16’’ housing
1. High Flow System requires 90% fewer
cartridges as competitive 2.5" cartridge
systems for a given ow rate.
2. High Flow Housings are 33% to 50%
smaller than competitively sized
housings for a given ow rate.
3.Fewer lters and a user-friendly
housing design means faster
change-outs than competitively
sized systems.
* Comparison assumes uid viscosity of 1 cp
Typical time/labor for change out
Typical Cartridge Flow Rates
Ordring Information
MAPH
Cartridge Design
P
Media
P=Polypropylene
G=GlassFiber
010
Removing Rating
010=1um
030=3um
050=5um
100=10um
200=20um
400=40um
700=70um
40
Length
40=40inch
60=60inch
E
O ring Material
E=EPDM
V=Fluororubber
S=Silicon
N=Buna-N rubber
More Filter type is available
Ultro-H High Flow HousingBrother High Flow Filtration System has been designed to provide youa high
performance ltering tool.
Easy to suit
Economic to operate and can increase your
Productive to larger capacity
With painting surface for carbon steel type
Consistent quality and long service life.
We have wide selection of sizes to accommodate from 1 to 7 lter elements in both
40-inch and 60-inch lengths.
With glass-bead blasted external surfaces for
stainless steel type
available in standard designs and customizable
congurations
Vertical: save footprint
Horizontal: easy to operation
Depending on your needs, we have 2 main congurations: horizontal and vertical.
Features
Horizontal Vertical
ASME Code Design
Robust cartridge center-post design eliminates bulky support plates providing easy access t housing internals.
Hinged cover for easy element change-outs
User-friendly cover lifting device for easy element changes-out
Handles liquid at pressure and temperature of up to 150 psig and 250 F
Manufactured from 304 or 316 L stainless steel for excellent corrosion protection (carbon steel option available in multi-element housing)
Available for 40’’ and 60’’ element lengths Available for 40’’ element lengths
Upstream and downstream gauge ports and drains
Options
Corrosion allowance for carbon steel housing
Choice of inlet/outlet ange size
BROTHER FILTRATION EQUIPMENT CO, LTDSuit 603, Unit 3, Building 5, Silver Lake Emerald, Dongxihu District, Wuhan, ChinaFax: 027 83992898Email: [email protected] www.brotherfiltration.com
Visit us on the web at www.brotherfiltration.com
Brother Filtration has a manufacture plant, for Brother representatives in your idea, please go to www.brotherfiltration.com.
Because of technological developments related to the products, systems, and or services described herein, the data and procedures are subject to change without notice. Please contact your Brother representative or visit www.brotherfiltration.com to verify that this information remains valid.
Brothe