un 3786-06 e (1993-08)
TRANSCRIPT
8/9/2019 UN 3786-06 E (1993-08)
http://slidepdf.com/reader/full/un-3786-06-e-1993-08 1/4
UHDE STANDARD August 1993
Pipe supportsRISER PIPE CLAMPS FOR UNINSULATED AND UN
HEAT-INSULATED STEEL PIPING 3786-06
Design dimensions
Rohrhalterungen; Rohrpratzen für ungedämmte undwärmegedämmte Stahlrohrleitungen; Konstruktionsmaße
1 ScopeThis Uhde standard specifies for the user the design dimensions and total weights of the riser pipe clamps for
uninsulated and heat-insulated (riser) steel piping.
See Uhde standard UN 3786-01, for the summary, dimensions and standard part numbers of the sub-assemblies.
The allowable loads are specified in Uhde standard UN 3786-01, supplement 4.
2 General definitions
Figure 1. Lug of pipe material
© 1993 Uhde GmbH
VP 4.1.1
Contents1 Scope . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
2 General definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
3 Riser pipe clamps, load transfer (no defined function), DN 100 to DN 600 . . . . . . . . . . . . . . . . . . . . 23.1 Friction bearing for steel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23.2 Friction bearing for concrete . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
4 Riser pipe clamps, DN 50 to DN 600, for twin brackets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
5 Materials and property classes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Dimensions in mm
Continued on pages 2 to 4
8/9/2019 UN 3786-06 E (1993-08)
http://slidepdf.com/reader/full/un-3786-06-e-1993-08 2/4
3 Riser pipe clamps, load transfer (no defined function), DN 100 to DN 6003.1 Friction bearing for steel
3.2 Friction bearing for concrete
Figure 2. Riser pipe clamp
Figure 3. Riser pipe clamp
Page 2 UN 3786-06
8/9/2019 UN 3786-06 E (1993-08)
http://slidepdf.com/reader/full/un-3786-06-e-1993-08 3/4
4 Riser pipe clamps, DN 50 to DN 600, for twin brackets
Friction bearing for concrete 4 lugs of pipe materialTotal weights in
kg1)
Friction bearing for steel Flat bar2)
Thick-ness
WidthDegreeof angle
Weldthickness
Frictionbearingfor steel
Frictionbearing
for concrete
Nomi-naldia-
meter
Pipeoutside
diameter
Clampinside
diameter
Dis-tance
Thick-ness
DN D DS H H1 M K F L t s b α
100 114.3 115
500 580 120 45 25
120 10 3.6
50
30° 3
12.54 14.80
125 139.7 140 4 12.77 15.03
150 168.3 169
140 12
4.5 19.04 22.74
200 219.1 220 6.3 15° 4
19.76 23.46
250 273 273 600 700 150
50
30
30.61 34.31
300 323.9 324 7.1
12°
4.5 31.57 35.27
350 355.6 356 700 800180
3)160
15
8 5.5 56.44 62.46
400 406.4 407 750 850 8.8 6 60.80 66.82
500 508 508 900 1030240
3)65 180
117
122.83 130.47
600 610 615 1000 1130 12.5 137.80 145.44
1) As the 4 lugs of pipe material will be provided by others, the weights of the lugs have not been con sidered.
2) The flat bar will be welded to a clamp segment during installation.3) Wide flat bar according to DIN 59200.
Table 1. Riser pipe clamps, friction bearing for steel or concrete, design dimensions andtotal weights
Figure 4. Riser pipe clamp
UN 3786-06 Page 3
8/9/2019 UN 3786-06 E (1993-08)
http://slidepdf.com/reader/full/un-3786-06-e-1993-08 4/4
5 Materials and property classes
Nomi-naldia-
meter
Pipeoutside
diameter
Clampinside
diameter
Insulationthickness
Dis-tance
Length HeightDis-
tanceDis-
tance
4 lugs of pipe materialTotal
weight inkg
1)Thick-ness
WidthDegree
of angle
Weldthickness
DN D DS H H1 M K F s b α
50 60.3 61 ≤ 110 640 740
80 40
20
2.9
50
45o
2.5
8.26
> 110 ≤ 220 860 960 10.47
65 76.1 77 ≤ 110 660 760 8.53
> 110 ≤ 220 880 980 10.74
80 88.9 89 ≤ 110 680 780
100 50 3.2
3
13.34
> 110 ≤ 220 900 1000 16.79
100 114.3 115 ≤ 110 700 800
120 60 25
3.6
30o
16.68
> 110 ≤ 220 920 1020 20.82
125 139.7 140 ≤ 110 720 840
417.67
> 110 ≤ 220 940 1060 21.81
150 168.3 169 ≤ 110 760 880
4.5 27.48
> 110 ≤ 220 980 1100 33.68
200219.1 220
≤ 110 780 900
6.3 15o
4
28.78
> 110 ≤ 220 1000 1120 34.98
250 273 273 ≤ 110 800 920
150 75
30
38.37
> 110 ≤ 220 1020 1140 46.16
300 323.9 324 ≤ 110 920 1120
7.1
12o
4.5 46.42
> 110 ≤ 220 1140 1340 54.21
350 355.6 356 ≤ 110 960 1160
1802)
90
8 5.5 76.78
> 110 ≤ 220 1180 1380 89.23
400 406.4 407 ≤ 110 1000 1200
8.8 680.60
> 110 ≤ 220 1220 1420 93.05
500 508 508 ≤ 110 1100 1300
2402)
120
11
7
148.24
> 110 ≤ 220 1320 1520 168.96
600 610 615 ≤ 110 1200 1400
12.5163.18
> 110 ≤ 220 1420 1620 183.911) As the 4 lugs of pipe material will be provided by others, the weights of the lugs have not been con sidered.2) Wide flat bar acc. DIN 59200.
Table 2. Riser pipe clamps for twin brackets, design dimensions and total weights
Clamp, form F and form FK according to Uhde standard UN 3790-03; material: 1.0038 (RSt 37-2)Flat bar according to DIN 1017 part 1; material: 1.0038 (RSt 37-2)Tubular spacer from pipe acc. DIN 2448; material: 1.0254 (St 37.0)Wide flat bar according to DIN 59200; material: 1.0038 (RSt 37-2)
Hexagon nut according to EN 24034; property class: 5Hexagon bolt according to EN 24016; property class: 4.6
Reference standardsUhde standards:UN 3786-01 Pipe supports; Friction bearings for uninsulated and heat-insulated steel piping;
Summary and dimensionsUN 3786-01 Suppl. 4 Pipe supports; Rising pipe clamps for uninsulated and heat-insulated steel piping;
Allowable loadsUN 3790-03 Pipe supports; Clamps form F, form FK and form FH; Design dimensionsDIN standards:DIN 1017 Part 1 Steel bars; Hot rolled flat steel for general purpose, dimensions, weights, permissible
variations
DIN 2448 Seamless steel pipes and tubes; Dimensions, conventional masses per unit length
DIN 59200 Flat steel products; Hot rolled wide flats; Dimensions, permissible variations ondimensions, form and weightEN standards:
EN 24016 Hexagon head bolts; Product grade C (identical with ISO 4016)EN 24034 Hexagon nuts; Product grades C (identical with ISO 4034)
Page 4 UN 3786-06