understanding customer needs
DESCRIPTION
The Voice of the Business (VoB) vs Voice of the Customer (VoC) What is the VoC? What does it mean for my business? Understand exactly the drivers behind the needs and wants of your customers and learn how to measure them the Six Sigma wayTRANSCRIPT
1.6 - Customer Requirements
Slide 2
Prepare project charter & Operating
agreements
Map the high-level process (end to end)
Assess process stability & capability
Implement solutions
TollgateCheck in
Monitor for consistency & improvement significance
Standardise processes &
Transfer knowledge
Establish the project team
Plan data collection & Map
process value stream
Reward team
Define customer requirements
Measure process & Display
baseline data
Confirm improvement
benefits
Plan implementation
Measure
Define
Improve
Control
Analyse
Optimise solution & Pilot
solution
Generate and select solutions
Confirm root causes
Identify data relationships
Y=f(x)
Identify possible defect &
variation causes
Analyse process non-value add
Analyse the measurement
system
Develop “to be” value stream map
TollgateCheck in
TollgateCheck in
TollgateCheck in
Six Sigma as DMAIC Phases
Slide 3
Customer Requirements
Objectives4 Identify the customer in order to listen and document the Voice of the
Customer (VOC) messages.
4 Perform KANO Analysis in order to classify customer requirements.
4 Translate VOCs into Critical Customer Requirements (CCRs).
4 Create output measures (Critical to Quality, CTQ) from CCRs.
4 Translate VOBs to measures that are Critical to Process (CTP).
Key Topics– Voice of the Customer Defined– Step 1: Develop a Customer-Focused Business Strategy– Step 2: Listening to the VOC– Step 3: Translating the VOC to CCRs– Step 4: Developing Measures and Indicators
Slide 4
Exploring Our Values Exercise - Part I
4 Describe and rank what you think is really valued by your company
Slide 5
What Do We Measure Today?
What numbers get the most attention?
What quality and performance measurements do we use?
Do we have a customer focus?
Do we have a quality focus?
Do we have an input/output focus?
Do we have a focus on waste elimination?
How do we use these measures?
Slide 6
Values Exercise - Part II
4 How are values measured?
4 Is the organisation measuring things that are valued?
Slide 7
New Measures Arise When New Questions Are Asked
New measures, and new behaviors, require that we ask new questions
4 Do questions trigger actions?
4 If we ask questions about outputs not inputs, we get a lot of focus and measures on outputs
4 If we ask questions about budgets, we measure budgets
4 How many of our questions are focused on process and service quality?
4 How many of our questions are focused on causes and inputs versus results and outputs?
Slide 8
Imagine you are the General Manager of a very successful movie theatre chain with many employees. You will be out of the country for three months and have asked your staff to fax you a weekly report on Monday morning. What information/metrics would you like to see in that fax?
Theatre Exercise (Part 1)
Slide 9
Theatre Exercise (Part 2)
You are headed to the movies with some friends…
4 The movie you would like to see is playing at several movie theatres in the area. All are about equidistant from your home.
4 What criteria do you use to decide which theatre to attend?
Slide 10
Who Is Your Customer?
4Define products or services provided to the customer
4 Identify the related process
4External customers pay our bills
4 Internal customers use our outputs as their inputs to achieve our business objectives and ultimately satisfy external customersExternal
Customers
Company
Internal Customers
Slide 11
Maximizing Customer Value
CustomerSupplier
Delivery
Price
Quality
NeedDo
(CTD) Cycle Time
(CTC) Cost
(CTQ) Defects
Maximizing customer value = close the Need/Do gap
Slide 12
What Is “Voice of the Customer”?
4 “Voice of the Customer” (VOC) is the expression of customer needs and desires– May be specific – “I need delivery within 3 days”– May be ambiguous – “Deliver faster”
4 The VOC can be compared to internal data (“Voice of the Process”) to assess our current process performance or process capability.
4 To be useful in a process improvement project we often need to work with the customer to understand the “Ambiguous” and make it “Specific”
Slide 13
Who Are the Customers?
4 Who are they?– Defined as: “Any person or organization that receives a product or service
(Output) from the work activities (Process)”– Those whose needs must be met for this process to be successful.
4 Types of “customers”:– External: Individuals or organizations outside of your business who are usually
associated with paying money for your products and services– Internal: Colleagues who receive products, services, support or information
from your process – i.e. Engineering, Manufacturing, Quality, Marketing, – Regulatory: Any government agency that has standards the process or product
must conform to – i.e. ACCC, EPA, FDA,
4 Which customer?– Customers can often be logically aggregated into groups or segments (not
all customers should be treated equally)
Slide 14
Why Is VOC Important?
4 They “pay the bills,” so it’s important to understand their needs:– Customer behavior is a key input to strategy and process design– Ultimately, all the value driver “levers” get pulled by an external customer
4 They define the “playing field”– They serve as the referee for all competitors– They define what is a “value-added” activity or service
4 They are always right…– Even if we cannot meet their needs, or do so profitably.
4 To be more profitable, you have to convince your customers to…– Buy more of your product / service Revenue Growth– Pay more for your product / service Economic Value Add – Serve their needs more efficiently Economic Value Add
(cost reduction)
Slide 15
Who are Your Customers? (project focus)
Slide 16
How Do Our Customers Communicate with Us?
Types of Voices
4 Complaints
4 Compliments
4 Product returns
4 Product/service sales preferences
4 Contract cancellations
4 Market share changes
4 Customer defections/acquisitions
4 Customer referrals
4 Closure rates of sales calls
4 What other customer voices could you or do you use in your business?
Sources of Customer Voices
BuyerBehavior
Informal/FormalTransactions
OutboundCommunications
CasualContact
InboundCommunications
ResearchMarket
Intelligence
Customers
Slide 17
Customers Define “Quality”
You must understand what the customers of your process care about!
Easeof Use
Aesthetics
Timeliness Accuracy
Flexibility& Options
Price & Cost
Customer
Slide 18
Performance Need Categories
4 The challenge is to understand how your customers, stakeholders, process owner, etc. define and prioritize the various needs and expectations they have of your products and services, or constraints they may inject.
Product or Service Features, Attributes, Dimensions, Characteristics Relating to the Function of the Product or Service, Reliability, Availability, Effectiveness, Recovery, Customer Returns, Defects, Rework or Scrap (Derived Primarily from the Customer - VOC)
Process Cost Efficiency, Prices to Consumer (Initial Plus Life Cycle), Repair Costs, Purchase Price, Financing Terms, Depreciation, Residual Value, Raw Material, Energy Efficiency (Derived Primarily from the Business - VOB)
Lead Times, Delivery Times, Turnaround Times, Setup Times, Delays, Up Time, Equipment Availability, Rolling Speed, Flexibility (Derived from the Customer or the Business – VOC/VOB)
Health, Safety and Environment Policy, Service Requirements, After-Purchase Reliability, Parts Availability, Service, Warranties, Maintainability, Customer-Required Maintenance, Product Liability, Product/Service Safety, Recordable Injuries, Lost Time, Environmental Incidents
Quality
Cost
Speed
Serviceand Safety
Corporate Responsibility
Ethical Business Conduct, Business Risk Management, Health Safety and Environment Policy, Code of Conduct
Slide 19
1. Gather the Voice of the Customer (VOC):
Customer Segmentation
4 The first step in gathering the VOC, is customer segmentation.– All customers are not created equal, and do not create equal value– Avoid “squeaky wheel” syndrome
4 If customers aren’t segmented, it may prove impossible to get a single “voice,” and the multiple voices may lead in opposite directions.
Total Customers Total Value
The Greatest Value Can Come From a Small Portion of Your Customer Base
Slide 20
1. Gather the Voice of the Customer (VOC):
Identify Your Customer Segments
– Economic• Revenue• Frequency• Size of Customer• Cost• Strategic goals
– Descriptive• Geographic• Demographic• Product feature• Industry
– Attitudinal• Price• Value• Service
Revenue
# of
cus
tom
ers
Price Service
OtherCo-Op
Sole Proprietor
Publicly heldPrivately held
Franchise
Geographic
Price & Service
Slide 21
Product/Service CustomersPotential Segments
1. Gather the Voice of the Customer (VOC):
Customer Segment Matrix
Objective4 Identifying customer segments.
Instructions1. Select a specific process output (product or service).2. List customers of the product or service.3. Identify ways to segment each customer.
Slide 22
1. Gather the Voice of the Customer (VOC):
Customer Segmentation Worksheet
Customer Internal orExternal? Segments/Description Priority
Slide 23
Sources of Customer Information
Complaints
Customer Service Representatives
Sales Representatives
Billing
Accounts Receivable
Collection
Interviews
Surveys
Focus Groups
Observations
Existing Company Information i.e. product returns, market share, etc.
Industry Experts
Secondary Data
Competitors
Internal &External Data
ListeningPost
ResearchMethods
1. Gather the Voice of the Customer (VOC):
Listening to the VOC
Select Sources of Customer Information
Slide 24
1. Gather the Voice of the Customer (VOC):
Communicating with Customers
4 No matter what source of customer information is used, customer communication has three basic parts:
4 1. Asking the right questions
4 2. Asking questions in the right way
4 3. Understanding the answers
Slide 25
Communicating with Customers:
Interviews
4 Purpose: To learn about a specific customer’s point of view on service issues, product/service attributes, and performance indicators/measures.
Individual
• Unique perspectives
• Senior-level participation
• Input from large-volume customer
Group
• Information from customers with similar product and service needs
• mid- to lower-level participation
• Information from many people for a single segment
Telephone/Mail
• Input from customers who are widely dispersed geographically
• Information on basic or simple issues
• Quick turn-around of information collection
Types of Interviews Characteristics of Information Needed
Slide 26
Communicating with Customers :
Surveys4 Purpose
– To measure the needs – or the importance and performance of – a product, service, or attribute across an entire segment or group of segments; furnishes quantitative data.
4 Uses– To efficiently gather a considerable amount of information from a large population– To conduct analysis that will result in data with statistical validity and integrity– To measure as-is conditions and drivers– To measure change and causality
4 The Survey Process– Review the survey objectives.– Determine the appropriate sample of the population.– Identify the specific areas of desired information.– Write draft questions and determine measurement scales.– Design the survey.– Test the individual questions and the total survey against the objectives.– Validate the questions and the survey (pilot).– Finalize the survey.
Telephone Mail Personal
SurveyOptions
Slide 27
Communicating with Customers : Focus Groups
4 Purpose– Organize information from the collective point of view of a
group of customers that represent a segment
4 Uses– To clarify and define customer needs– To gain insights into the prioritization of needs– To test concepts and get feedback– Sometimes as a next step after customer interviews or a
preliminary step in a survey process
4 Typically composed of 7 to 13 participants who share characteristics that relate to the focus group topic
4 Participants will be asked to thoroughly discuss very few topics
Slide 28
2. Translate the VOC into
Critical to Quality requirements (CTQs)
4 Once the Voice of the Customer has been gathered, that information must be translated into Critical To Quality requirements (CTQs)
“I hate dealing with this company!”
Products are not delivered on time
10 day lead time ±1 day
Voice of the Customer
After Clarifying,the Key Issue(s) Is...
Critical To Quality Requirements
4 Good CTQ requirements:– Are specific & measurable (and the method of measurement is specific)– Are related directly to an attribute of the product or service– Don’t have alternatives and don’t bias the design toward a particular approach
or technology– Are complete and unambiguous– Describe what, not how
Slide 29
2. Translating VOC into CTQs:
Customer Input to Key Issues to CTQs
Actual Customer Statements and Comments
The Real Customer Concerns, Values or
Expectations
The Specific, Precise and Measurable Characteristic
• “This mower should be easy to start”
• “The cord shouldn’t be too hard to pull”
• Wants the mower to start quickly and painlessly
• Mower starts within two pulls on the cord
• Mower starts with a 5kg pull on the cord
• “I want to talk to the right person and don’t want to wait on hold too long”
• Wants to talk to the right person quickly
• No additional menu items on voice system
• Customer reaches correct person the first time within 30 seconds
• “The vehicles are always breaking down”
• Low availability Vehicle Availability > 95% during 7am - 7pm
Critical To Quality Requirement
Key Customer IssueVoice of Customer
Input
Slide 30
Activity: Defining Customer Requirements
OBJECTIVE: Practice Defining Customer Requirements
AGENDA:
1. Assign team roles
2. Facilitator introduces tool and leads team through next steps.
3. Have 2-3 members share customer comments they’ve heard.
4. Translate comments into- Key Issue- Requirements
5. Discuss next steps to validate customer requirements.
6. Prepare to report.
7. TIME: 15 minutes
Slide 31
2. Translating VOC into CTQs:
Getting Value from VOC Data
4 Making sense of qualitative data is an iterative process
4 It involves interpretation and prioritization
4 Often requires follow-up with additional research
4 Useful tools:– Affinity Analysis– Tree Diagrams
Slide 32
Theme 1
Need 1 Need 2
Theme 2
Need 3 Need 4
Need 5
Theme 3
Need 7
Need 8
2. Translating VOC into CTQs:
Affinity Diagrams
4 The first step in getting value from customer data is organizing it in a way that will reveal themes
4 An affinity diagram is a good tool for this purpose since it organizes language data into related groups– Gather ideas from interview
transcripts, surveys, etc.– Generate customer need
statements on cards or sticky notes– Group the cards to find the “affinity”– Label the groups of cards
4 Moves team from high-level customer needs to greater detail in order to define requirements
4 A tool for breaking broad process steps or product features into greater detail
4 Helps organize needs by level of detail
Slide 33
2. Translating VOC into CTQs:
Tree Diagrams
Affinity DiagramsTree Diagram
Slide 34
2. Translating VOC into CTQs:
Tree Diagrams
Primary Need
Secondary Need
Tertiary Need CustomerRequireme
nt
Product/Service
CustomerRequireme
nt
CustomerRequireme
nt
CustomerRequireme
nt
Slide 35
2. Translating VOC into CTQs:
Tree Diagram Example: Pizza
Customer wants“healthy choices”
Crust
Toppings
Other ingredients
Whole wheat
Unbleached flour
Cheese
Sauce
Additives
Spices
Oil
No cheese
Low-fat mozzarella
Low-fat white cheddar
Meats
Vegetables
Slide 36
2. Translating VOC into CTQs:
Determining “Critical Customer Requirements”
4 From Requirements to “Quality” – A customer’s perception of value & performance represents their
view of the “quality” of a product or service– Their basis for evaluation is how well their requirements have been
met– Evaluations are also influenced by their “expectations”– Quality = Actual Performance - Expectations
4 All requirements are not created equal …– Customers weight their requirements differently– The most important customer requirements become those CTQs.
4 Critical To Quality Requirements– Represent a customer desire that must be met– Have a strong correlation to the “buying decision”– Often form the basis for competitor comparison
Slide 37
2. Translating VOC into CTQs:
CCR Selection Methods
4 Ask Customers– Fast and specific feedback– However, they may not be completely honest with you
4 Key Buying Factor Analysis– Formal customer survey– Force ranks the requirements
4 Kano Analysis– Good “first cut” technique to evaluate relative
importance of customer requirements– Segments by “type of quality”/customer expectation
4 House of Quality (Quality Function Deployment)
NormalQuality
ExcitingQuality
ExpectedQuality
4.0
5.0
6.0
7.0
8.0
9.0
10.0
On-
time
Delive
ry
% C
omple
te O
rder
War
rant
y Ret
urns
Inve
ntor
y Tur
ns
Corre
ct In
voice
Price
Specia
l Ord
er L
ead
Tim
e
Relatio
nship
Man
agem
ent
New P
rodu
ct D
evelo
pmen
t
Brand
Imag
e
Produ
ct O
fferin
g Bre
adth
Proxim
ity to
Cus
tom
er
Slide 38
2. Translating VOC into CTQs:
CTQ Key Buying Factor Analysis
Explanation: Yellow bars show relative importance of key buying factors to customers; Red line rates company performance against key buying factors; Other lines rate competitors’ performance against key buying factors
4.0
5.0
6.0
7.0
8.0
9.0
10.0
On-tim
e Deli
very
% C
omple
te O
rder
War
rant
y Ret
urns
Inve
ntor
y Tur
ns
Corre
ct In
voice
Price
Specia
l Ord
er L
ead
Tim
e
Relatio
nship
Man
agem
ent
New P
rodu
ct Dev
elopm
ent
Brand
Imag
e
Produ
ct Offe
ring
Bread
th
Proxim
ity to
Cus
tom
er
CTQ Importance Company Comp 1 Comp 2 Comp 3
Slide 39
2. Translating VOC into CTQs:
Kano Model
4 The Kano Model is helpful in understanding different types of customer needs.
4 There is much risk in blindly fulfilling customer needs without a good understanding of the types of requirements.
4 Without this understanding, a team risks:– Providing superfluous quality– Wowing the customer in one
area, and driving them to competitors in another
– Focusing only on what customers say, and not what they think or believe
Slide 40
2. Translating VOC into CTQs:
The Kano Model Classifies Customer Needs
4 Dissatisfiers – Basic requirements. Expected features or characteristics of a product or service. These needs are typically “unspoken”. If these needs are not fulfilled, the customer will be extremely dissatisfied.
4 Satisfiers – Performance requirements. Standard characteristics that increase or decrease satisfaction by their degree (cost/price, ease of use, speed). These needs are typically “spoken”.
4 Delighters – Unexpected features or characteristics that impress customers and earn you “extra credit”. These needs are also typically “unspoken”.
Slide 41
2. Translating VOC into CTQs:
Collecting the VOC based on Kano analysis
4 Dissatisfiers (Typically Unspoken) – Gather them using 1-on-1 interviews and focus groups– The discussion points are not well established – often not discussed at
all unless there’s a reason to – but there is often consensus after the fact• For example, in a hotel bathroom, it’s the provision of soap, towels, toilet
paper, hot water – none of which are ordinarily worthy of comment unless they are missing!
4 Satisfiers (Typically Spoken) – Gather them using surveys (phone, email, etc.)– The discussion points are well established – it’s the issues that
advertisements address, it’s the basis of discussions with our neighbors• For example, in a hotel, it’s how long the wait is to check-in, availability of a
coffee maker in the room, Internet access, size of the TV, etc.
Slide 42
2. Translating VOC into CTQs:
Collecting the VOC (cont.)
4 Delighters (Typically Unspoken) – Gather them using carefully orchestrated focus groups preceded by 1-on-1 and small group interviews to establish several bases for further expansion– The specific points of discussion are not known (except in
the most general sense in some cases)• For example, being able to check into a hotel by swiping the
credit card you used for guaranteeing the reservation – one swipe of the card, one signature on the surface of the computer monitor and your room key is issued.
Slide 43
2. Translating VOC into CTQs:
The Difficulty in Collecting Delighters
4 Very often, Delighters are a unique combination that is really the intersection of: – Demand on the part of the customer for products that s/he
is unaware could be made available, and– Supply technologists are unaware of possibilities for
product innovations
4 So, the customer doesn’t know it is possible, and the business doesn’t know there is a demand
4 Note: Delighters are not just added features that the customer did not expect. They must truly be of value to the customer.
Slide 44
2. Translating VOC into CTQs:
Getting to Delighters
4 In spite of the difficulties, there are ways to spur creative thinking – sometimes it is as simple as well-planned focus groups that have a balance of:– Early adopters: progressive individuals who are able to
appreciate the impact on their lives of alternative services, or combinations of services/products not offered now, and
– Open minded technologists with an understanding of the possibilities, both of specific concepts as well as combinations
4 Work with customers and suppliers to explore where there might be matches of the customers’ needs to the suppliers’ potential range of product offerings
Slide 45
2. Translating VOC into CTQs:
Uses of The Kano Model
4 Validate that some of the needs spoken by the customer during the interviews and focus groups are truly Critical To Quality requirements that will have an impact on customer satisfaction or a purchase decision
4 Determine if there were some potential requirements that were not explicitly stated by customers
4 Test out some of the team’s ideas for differentiation
4 Determine whether some of the features that existed in previous offerings were and still are valued by the customer
Slide 46
2. Translating VOC into CTQs:
Applying the Kano Table to Develop CTQs
4 For each potential need, ask the customer to assess:– How would they feel if the need WAS
addressed? (Positive)– How would they feel if the need WAS
NOT addressed? (Negative)
4 The customer has four choices in response to each question:
1. I’d like it
2. It is normally that way (that feature is expected)
3. I don’t care
4. I wouldn’t like it
4 Based on the answers to the “positive” and “negative” questions, use the table to determine the type of need
Don’t Like
Satisfier
Dissatisfier
Dissatisfier
–
Don’t Care
Delighter
–
–
–
Normal
Delighter
–
–
–
Like
–
–
–
–
Like
Normal
Don’t Care
Don’t LikeP
osit
ive Q
uesti
on
An
sw
ers
Negative Question Answers
Slide 47
2. Translating VOC into CTQs:
Determining Performance Targets – Example
4 Let’s say one of your needs is related to cycle time (hotel check-in time).
4 Guests have stated they want to be able to quickly check-in. How quickly?
4 Ask your customers:– How would you feel if check-in time took
less than 5 minutes? (Positive) Answer: “That’s Normal”
– How would you feel if check-in took more than 5 minutes? (Negative)
Answer: “Don’t Like”
4 Check-in time more than 5 minutes is a Dissatisfier – it must be met. 5 minutes is the absolute maximum check-in time.
Don’t Like
Satisfier
Dissatisfier
Dissatisfier
–
Don’t Care
Delighter
–
–
–
Normal
Delighter
–
–
–
Like
–
–
–
–
Like
Normal
Don’t Care
Don’t LikeP
osit
ive Q
uesti
on
An
sw
ers
Negative Question Answers
Slide 48
2. Translating VOC into CTQs:
Determining Performance Targets – Example
4 Then ask your customers:– How would you feel if check-in time took less
than 2 minutes? (Positive) Answer: “I’d Like It”
– How would you feel if check-in took more than 2 minutes? (Negative) Answer: “That’s Normal”
4 Check-in time less than 2 minutes is a Delighter. If the check-in process could be designed to check-in customers in less than 2 minutes, we could definitely differentiate our offering in the marketplace
4 Remember –What is the cost impact versus the customer value for including the feature in the final design? Is there a business case for including the feature?
Don’t Like
Satisfier
Dissatisfier
Dissatisfier
–
Don’t Care
Delighter
–
–
–
Normal
Delighter
–
–
–
Like
–
–
–
–
Like
Normal
Don’t Care
Don’t LikeP
osit
ive Q
uesti
on
An
sw
ers
Negative Question Answers
Slide 49
2. Translating VOC into CTQs:
Using the Kano Model to Validate Features
4 You’re uncertain of value of a particular characteristic of a previous version of your product
4 Let’s say you design and manufacture bicycles. Since none of your customers mentioned a kickstand, you’re wondering whether your customers still value kickstands. If not, the team could eliminate the feature and save on product cost.
4 You ask your customers:
– How would you feel if the bicycle had a kickstand? (Positive)
Answer: “That’s Normal”
– How would you feel if the bicycle didn’t have a kickstand? (Negative)
Answer: “Don’t Like”
4 Customers considered the kickstand a Dissatisfier, meaning that even though they didn’t mention it as a Need, it had better be included in the design or they’ll be dissatisfied with the product.
Don’t Like
Satisfier
Dissatisfier
Dissatisfier
–
Don’t Care
Delighter
–
–
–
Normal
Delighter
–
–
–
Like
–
–
–
–
Like
Normal
Don’t Care
Don’t Like
Posit
ive Q
uesti
on
An
sw
ers
Negative Question Answers
Slide 50
2. Translating VOC into CTQs:
Advantages of Classifying Critical Needs
4 Identify the Critical To Quality requirements which have the greatest influence on customer satisfaction.
4 Prioritizing requirements for future development. It is not very useful to invest in improving Dissatisfier requirements that are already at a satisfactory level.
4 Performing trade-offs. If two customer needs cannot be met simultaneously due to technical or financial reasons, knowing the type of customer need can help make compromises that minimize the impact on customer satisfaction.
Slide 51
3. Convert CTQs into KPOVs
4 Once the Critical To Quality requirements of the product have been defined, they must be converted into Key Process Output Variables for the process
4 The process is a function of converting inputs (Xs) into outputs (KPOVs or Ys)
Y = f(X1, X2, X3,…Xn)
4 We must first define all of the Ys that our process must satisfy, in order to use the DMAIC philosophy to focus on the correct Xs to improve the process
Slide 52
3. Convert CTQs into KPOVs:
Getting to KPOVs (Big “Y”s)
4 Key Process Output Variables come from two sources:–The Critical to Customer Requirements (Voice of the Customer - VOC)
–The Critical to Business Requirements (Voice of the Business – VOB)
4 These two sources come together to develop the Big “Y” outputs that the process must meet
CCR’sCTQ’s CustomerIssues
CustomerIssues
________
________
________
________
________
________
________
________
________
________
________
________
VOCVOC
________
________
________
________
________
________
VOBVOB________
________
________
________
BusinessIssues
BusinessIssues________
________
________
________
CBR’sCBR’s________
________
________
________
VOB -Voice of the BusinessCBR -Critical Business Requirements
VOC -Voice of the CustomerCTQ -Critical To Quality Requirements
Y 1
Y 2
Y 3
Y n
KPOVs
Slide 53
3. Convert CTQs into KPOVs:
CTQ and CBR Examples
CTQ’sCTQ’s
Price/Unit
Delivery Time
Dimensions
Purity
Reliability
Options
Service Level
Price/Unit
Delivery Time
Dimensions
Purity
Reliability
Options
Service Level
CBR’sCBR’sCost/Unit
Productivity
Compliance with
Regulations
Changeover Time
Safety
Training Hours
Cost/Unit
Productivity
Compliance with
Regulations
Changeover Time
Safety
Training Hours
Critical to: The BusinessThe RegulatorThe Employees
Critical to: The Customer
The MarketThe Process
Y 1
Y 2
Y 3
Y n
KPOVs
Slide 54
3. Convert CTQs into KPOVs:
Finalizing the Big “Y”s
4 In finalizing the Big “Y”s for the process, they must be:– Tangible – Meaningful– Measurable
CTQsNo Defects
Quick Delivery
CBRsCost / Unit
Productivity
3.6 DPMO
3 Day Lead Time
$12.50 per unit cost
1500 units/person
KPOVs
Slide 55
4. Create a SIPOC map
4 Once the KPOVs have been identified, a SIPOC map can be created
4 Supplier Input Process Output Customer (SIPOC) map– Suppliers – All internal and external suppliers to the process
– Inputs – All inputs to the process i.e. material, forms, information, etc.
– Process – One block representing the entire process
– Outputs – All outputs for both internal and external customers
– Customers – All internal and external customers to the process
A high-level SIPOC map helps to visualize the Voice of the Customer and begin to see the
relationships between the Outputs and the Inputs of the process
Slide 56
4. Create a SIPOC map:
The SIPOC map
4 Go upstream to the process steps which most impact the Output and determine the Key Process Input Variables (KPIVs) which affect the KPOV’s.
4 Try to use leading measures instead of lagging measures – if lagging, then close/reduce amount of lag.
REQUIREMENTS REQUIREMENTS
MEASURES
PROCESS MAP
Suppliers Inputs Process Outputs Customers
MEASURES
PS I O C
Slide 57
4. Create a SIPOC map:
Leading and Lagging Measures
4 Leading Measures tell the need to adjust process before the fact.– Evaluate inputs and adjust downstream process to reflect results
of evaluation.
4 Lagging Measures inform about process performance and the need for adjustment after the fact.– Some close lagging measures are able to give immediate feedback to
the process – small likelihood of providing inconsistent service.• Evaluate results of process step and feed information upstream.
– Some long lagging measures take so long to give feedback that decision-making is not timely and not well defined – greater likelihood of providing inconsistent service.• Evaluate results of process output and feed information upstream.
Slide 58
Direction
Start/Stop
Decision
Process Step
Process Mapping Symbols
Slide 59
Start Stop
1. Define process to be reviewed - name it.• Agree on beginning and end of process - bind it.
2. Brainstorm the outputs and customers who receive them.
3. Identify the customers’ requirements for each output.
4. Brainstorm the inputs and the suppliers who provide them.
Suppliers Inputs Outputs Customers Requirements
Basic Steps of SIPOC Process Mapping
Slide 60
6. Arrange the process steps in sequence, discuss steps in detail to clarify the order and what the step output is. Draw lines and arrows indicating flow. Indicate key decision points with a and label the paths for each.
7. Validate the process with a “walk through" of the actual process. Add any missed steps, decision points or rework loops.
Check DecisionAction Step
Action Step
Start Stop
5. Brainstorm 5-10 process steps.Hints:• Write one step per post-it/card• All steps should begin with a verb• Don’t discuss process steps in detail• Don’t try to establish the order of the steps (yet)
Basic Steps of SIPOC Process Mapping (cont.)
N
Y
Slide 61
OBJECTIVE: Develop a Process Map
Activity: Mapping
AGENDA:
1. Assign team roles
2. Select one process to map
3. Define the process boundaries - start and stop
4. Identify the outputs and customers
5. Discuss customer requirements of performance
6. Identify inputs and suppliers
7. Brainstorm 5-10 process steps and arrange steps in sequence
8. Report out on challenges in mappingTIME: 40 minutes
Slide 62
What It Really Is... S I P O C S I O CP
What You Think It Is...
Versions of a Process
Slide 63
Action Plans to Validate
Slide 64
Validate your preliminary process map withkey process stakeholders such as currentprocess participants, customers, and suppliers.
4 Check: To ensure the map reflects the way it really works
4 Identify: Exception cases
4 Ask: About typical problems and their impact
4 Assess: Current performance and check for data
Stakeholder Check-In
Slide 65
4. Create a SIPOC map: SIPOC Uses
Identify Key Output (Y’s) Process & Input (X’s) Variables, and
Metrics
Y = f(X)
Value Stream Mapping For deeper process
analysis
Cause & Effect Matrix For X and Y interactions
Congratulations, you’ve made it to the end!
Slide 66