unidoor x (style m3) · unidoor-x style m glass-to-glass hinge shower door installation important...

55
“UNIDOOR X (STYLE M3)” ©2017 DreamLine. All Rights Reserved UNIDOOR X (STYLE M3) SHOWER DOOR & GLASS PANEL INSTALLATION INSTRUCTIONS IMPORTANT DreamLine ® reserves the right to alter, modify or redesign products at any time without prior notice. For the latest up-to-date technical drawings, manuals, warranty information or additional details please refer to your model’s web page on DreamLine.com STEP 1: Install Shower Door STEP 2: Install Panels STYLE M3 For more information about DreamLine Shower Doors, Tub Doors and Enclosures, please visit DreamLine.com

Upload: others

Post on 18-Oct-2020

3 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: UNIDOOR X (STYLE M3) · UNIDOOR-X Style M GLASS-TO-GLASS HINGE SHOWER DOOR INSTALLATION IMPORTANT DreamLine® reserves the right to alter, modify or redesign products at any time

“UNIDOOR X (STYLE M3)” ©2017 DreamLine. All Rights Reserved

UNIDOOR X (STYLE M3)

SHOWER DOOR & GLASS PANEL INSTALLATION INSTRUCTIONS

IMPORTANT

DreamLine® reserves the right to alter, modify or redesign products at any time without prior notice.

For the latest up-to-date technical drawings, manuals, warranty information or additional details

please refer to your model’s web page on DreamLine.com

STEP 1: Install Shower Door

STEP 2: Install Panels

STYLE M3

For more information about DreamLine Shower Doors, Tub Doors and Enclosures, please visit DreamLine.com

Page 2: UNIDOOR X (STYLE M3) · UNIDOOR-X Style M GLASS-TO-GLASS HINGE SHOWER DOOR INSTALLATION IMPORTANT DreamLine® reserves the right to alter, modify or redesign products at any time

UNIDOOR-X Style MGLASS-TO-GLASS HINGE SHOWER DOOR INSTALLATION

IMPORTANTDreamLine® reserves the right to alter, modify or redesign products at any time without prior notice. For the latest up-to-date technical drawings, manuals, warranty information or additional details please refer to yourmodel’s web page on DreamLine.com

For more information about DreamLine® products please visit DreamLine.com

UNIDOOR-X (STYLE M) manual Ver 2 11/2016

Right Hand Door installation shown

©2017 DreamLine. All Rights Reserved

Page 3: UNIDOOR X (STYLE M3) · UNIDOOR-X Style M GLASS-TO-GLASS HINGE SHOWER DOOR INSTALLATION IMPORTANT DreamLine® reserves the right to alter, modify or redesign products at any time

This model is treated with DreamLine’s exclusive ClearMaxTM Glass technology. This is a specially-formulated coating that prevents the build up of soap and water spots.

Install the surface with the ClearMaxTM label towards the inside of the shower.Please note that depending on the model, the glass may be coated on either one or both surfaces.

For best results, squeegee the glass after each use and dry with a soft cloth.

2UNIDOOR-X (STYLE M) manual Ver 2 11/2016

©2017 DreamLine. All Rights Reserved

Page 4: UNIDOOR X (STYLE M3) · UNIDOOR-X Style M GLASS-TO-GLASS HINGE SHOWER DOOR INSTALLATION IMPORTANT DreamLine® reserves the right to alter, modify or redesign products at any time

UNIDOOR-X Style M with 24” hinge panelwith Left or Right L-Bracket

D32372L-##D32372R-##D32472L-##D32472R-##D32572L-##D32572R-##D32672L-##D32672R-##D32772L-##D32772R-##D32872L-##D32872R-##D32972L-##D32972R-##D33072L-##D33072R-##

##- hardware finish01- Chrome04- Brushed Nickel06- Oil Rubbed Bronze09 - Satin Black

UNIDOOR-X Style M with 6” hinge panel with Hinge Panel Glass Bracket

D12372-##D12472-##D12572-##D12672-##D12772-##D12872-##D12972-##D13072-##

Model Numbers

3 UNIDOOR-X (STYLE M) manual Ver 2 11/2016

©2017 DreamLine. All Rights Reserved

Page 5: UNIDOOR X (STYLE M3) · UNIDOOR-X Style M GLASS-TO-GLASS HINGE SHOWER DOOR INSTALLATION IMPORTANT DreamLine® reserves the right to alter, modify or redesign products at any time

!

Unidoor-X Style M manual used with the following Model Styles:

When installing one of the configurations shown above with glass-to-glass hinges,

discard the Style A manual that is packaged with the door glass and use this Style M manual

for the installation of the hinge panel glass and door glass.

Next, use the manual that is packaged with the panel glass for the panel installation instructions

based on the Style or configuration:

◾for Style M1 - use manuals for Style M & Style F ◾for Style M2 - use manuals for Style M & Style G

◾for Style M3 - use manuals for Style M & Style I ◾for Style M4 - use manuals for Style M & Style J

◾for Style L1 - use manuals for Style M & Style L

4UNIDOOR-X (STYLE M) manual Ver 2 11/2016

Style M

Style M1

Style M4

Style M2

Style L1

Style M3

©2017 DreamLine. All Rights Reserved

Page 6: UNIDOOR X (STYLE M3) · UNIDOOR-X Style M GLASS-TO-GLASS HINGE SHOWER DOOR INSTALLATION IMPORTANT DreamLine® reserves the right to alter, modify or redesign products at any time

STYLE L1 *UNIDOOR-X Shower door 23”~30” with 6” or 24” hinge panel and with 30”- 34” full height return panel secured using u-channel

STYLE M *UNIDOOR-X Shower door 23”~30” with 6” or 24” hinge panel secured using u-channel

STYLE M1 *UNIDOOR-X Shower door 23”~30” with 6” or 24” hinge panel and with 6”, 6-1/2”, 14”, 14-1/2”, 22” or 22-1/2” full height inline panel secured using u-channel

STYLE M2 *UNIDOOR-X Shower door 23”~30” with 6” or 24” hinge panel with 12”, 18”, 24” or 26” inline buttress panel secured using u-channel

STYLE M3 * UNIDOOR-X Shower door 23”~30” with 6” or 24” hinge panel, with 6”, 6-1/2”, 14”, 14-1/2”, 22” or 22-1/2” full height inline panel and 30” - 34” full height return panel secured using u-channel

STYLE M4 *UNIDOOR-X Shower door 23”~30” with 6” or 24” hinge panel, with 12”, 18”, 24” or 26” in-line buttress panel and 30”, 36” or 40” buttress return panel secured using u-channel

* For the panel installation instructions, please refer to the separate manual included in the panel glass packaging.

Depending on the panel glass size, some panel glass may have both an inline panel manual and a return panel manual. Use the appropriate manual for the model style/configuration. For Example: a 30” full height panel can be used as an inline panel or a full height return panel.

NOTE: The Unidoor series doors and enclosures are reversible for left or right-hand door installation. This manual will show the right-hand door installation. For a left-hand door installation, simply begin on the opposite wall and reverse the orientation of the parts as necessary.

5UNIDOOR-X (STYLE M) manual Ver 2 11/2016

use Right-hand L-bracket use Left-hand L-bracket

©2017 DreamLine. All Rights Reserved

Page 7: UNIDOOR X (STYLE M3) · UNIDOOR-X Style M GLASS-TO-GLASS HINGE SHOWER DOOR INSTALLATION IMPORTANT DreamLine® reserves the right to alter, modify or redesign products at any time

Preparation

NOTE: DO NOT install the handle onto the door glass until instructed to do so. DO NOT attempt to lift the glass using the handle. This could result in damage to the glass and/or serious personal injury. Always use an assistant or a professional grade glass suction cup when handling heavy glass.

1. Prior to installation, examine all boxes and packages for shipping damage and compare the piece count with your packing slip. After opening all boxes and packages read this introduction carefully. Check that all of the needed parts are included in the package by checking off the components on the “Detailed Diagram of Shower Door Components”. If the unit has been damaged, has a finishing defect, or has missing parts, please contact our customer support department within 3 business days of the delivery date. Please note that DreamLine® will not replace any damaged products or missing parts free of charge after 3 business days or if the product has been installed. Feel free to contact DreamLine® if you have any questions, and please provide an order number, job name or other proof of purchase to help us identify your original order.

2. Please note that you should consult your local building codes with questions on installation compliance standards. Building and plumbing codes may vary by location, and DreamLine® is not responsible for code compliance standards for your project and will not accept any returns.

3. If this unit is going to be installed in a new construction, please install all of the required plumbing and drainage before installing the shower. Use a competent and licensed (if required by local code) plumber for all plumbing installation.

4. Please make sure that prior to beginning the installation, the surfaces are leveled and solid and will be able to support the total weight of the unit. Also make sure the walls are at right angles. Irregular installation surface level, radius corners or improper angle of side walls will result in serious problems for your installation. Note that some adjustments and drilling will be necessary during the installation process.

5. Please protect all primary surfaces of the product during installation. Never set the glass down directly onto a tile floor. Leave corner protectors in place until it is necessary to remove them. Always use a piece of wood or cardboard to protect the bottom edge and corners of the glass prior to and during installation.

6. This unit must be installed upon a finished threshold and against finished walls.

7. The hinge panel glass for this model should not be adjusted more than 1/4” for out-of-plumb within the U-channel. This model does NOT have any adjustment for overall width. Verify that the model size ordered will fit the finished opening before begining installation.

8. This model requires that you drill into the threshold for proper installation.

9. It is recommended to install the hinge-side U-channel into a stud.

10. This model requires minimum 5/8” of flat threshold space for installation.

Professional installation recommended

6UNIDOOR-X (STYLE M) manual Ver 2 11/2016

!

©2017 DreamLine. All Rights Reserved

Page 8: UNIDOOR X (STYLE M3) · UNIDOOR-X Style M GLASS-TO-GLASS HINGE SHOWER DOOR INSTALLATION IMPORTANT DreamLine® reserves the right to alter, modify or redesign products at any time

Tools

Parts List

Table of ContentsSection title Page #

ToolsPreparation

Hinge Panel Glass Bracket installationHinge Panel Glass with L-Bracket installation

Hinges and Door Glass installationVinyl Seals

Product maintenanceAdjustable Hinge instructions

10~14876

2724~25

15~2122~23

28

NOTE: Unpack your unit carefully and inspect it. Lay it out and identify all parts using the detailed diagram and packing list in your manual as a reference. Before discarding the carton, check for small hardware bags that may have fallen to the bottom of the box. If any parts are damaged or missing, please contact DreamLine® for replacement. The shipping boxes may contain extra parts not used in your model con�guration.Retain these installation instructions for future reference.

7UNIDOOR-X (STYLE M) manual Ver 2 11/2016

Tape Phillips

(Ø=1/8")Miter saw

Measure

Drill bitDrill

PencilLevel

Drill bit Power

Silicone*

Screwdriver

(Ø=5/16")

Hammer

*Quick-drying/fast curing silicone recommended for the installation of hinge panels.Metal File

or Hacksaw

©2017 DreamLine. All Rights Reserved

Page 9: UNIDOOR X (STYLE M3) · UNIDOOR-X Style M GLASS-TO-GLASS HINGE SHOWER DOOR INSTALLATION IMPORTANT DreamLine® reserves the right to alter, modify or redesign products at any time

Detailed Diagram of shower door components

The glass surface with the ClearMax™

label must be installed to face

inside of the shower

* L-shaped strip (#08) only used for Style M configuration** L-Bracket (for 24” hinge panel glass) is not included with 6” hinge panel glass*** Hinge panel glass - the top hinge cutout is 7-7/8” to center, the bottom cutout is 8-3/8” to center. ^ Hinge Panel Glass Bracket (#36) is for the 6“ hinge panel only and is not to be used with the 24” hinge panel glass

L-Bracket (Left or Right) (for 24”)**35

01 Door Glass 1pc

13 Ø5/16” Wall anchor 5pcs

02 Handle 1pc23 Countersunk screw ST4.2x40 8pcs

05 Glass-to-Glass Hinge 2pcs29 U-channel 2 (44”, bottom profile) 1pc

07 Bottom anti-water strip 1pc32 Hinge panel glass (6” or 24”)*** 1pc

08 L-shaped strip * 1pc33 Flanged anti-water strip 1pc

09 U-channel 1 (76”, wall profile) 1pc34 PVC glass spacer (0.5mm)

1pc1pc

36 1pcHinge Panel Glass Bracket (for 6”) ^

8UNIDOOR-X (STYLE M) manual Ver 2 11/2016

Right-hand L-bracket Left-hand L-bracket (shown)

Parts List

34

1

33

7

8

23

9

29

13

5

2

1

35

32

36used with 6” hinge panel glass

used with 24” hinge panel glass

24” hinge panel glass

6” hinge panel glass

32

©2017 DreamLine. All Rights Reserved

Page 10: UNIDOOR X (STYLE M3) · UNIDOOR-X Style M GLASS-TO-GLASS HINGE SHOWER DOOR INSTALLATION IMPORTANT DreamLine® reserves the right to alter, modify or redesign products at any time

Installation steps

9UNIDOOR-X (STYLE M) manual Ver 2 11/2016

Fig 1

#36

inside outsiderubber gasket

Fig 2

6” Hinge Panel with Hinge Panel Glass Bracket (#36)

rubber gasket

top

NOTE: The following shower door installation instructions should be used as a general guide and prerequisite to the installation of the UNIDOOR Style M, M1, M2, M3, M4 and L1 models. Before you begin the installation, please check your finished opening size and model dimensions to ensure proper placement of the Hinge Panel Glass (#32) and Door Glass (#01). Specific size information can be found on our website: DreamLine.com.

NOTE: The 24” Hinge Panel Glass (#32) installs with either a left or right L-Bracket (#35). (Fig 1)The 6“ Hinge Panel Glass installs with the Hinge Panel Glass Bracket (#36). (Fig 2)This manual includes the instructions for both methods.

NOTE: There is a top and a bottom to the Hinge Panel Glass (#32): The top hinge cutout is 7-7/8” to center, the bottom hinge cutout is 8-3/8” to center. The hinge panel glass must be installed correctly.

Style M - 6” & 24” Inline Panel and Shower Door Installation

NOTE: For the 6” Hinge Panel Glass (#32) installation, begin with Step #1. The Hinge Panel Glass Bracket (#36) installs at the top of the vertical U-channel. (Fig 2) The Hinge Panel Glass Bracket (#36) is only for use with the 6“ Hinge Panel Glass (#32). DO NOT USE this bracket with the 24” hinge panel glass.

For the 24” Hinge Panel Glass (#32) installation with the L-Bracket (#35), begin with Step #10 on Page 15.Note: The L-Bracket (#35) is not included with the 6” hinge panel installation.

NOTE: It is strongly recommended that the silicone be allowed to fully cure in the U-channels before hanging the door glass.

24” Hinge Panel with left L-bracket (#35)

NOTE: The Hinge Panel Glass Bracket (#36) is only to be installed with the 6” Hinge Panel Glass (#32) for the UNIDOOR-X models. Maximum out-of-plumb adjustment for Hinge Panel Glass = 1/4”

!

©2017 DreamLine. All Rights Reserved

Page 11: UNIDOOR X (STYLE M3) · UNIDOOR-X Style M GLASS-TO-GLASS HINGE SHOWER DOOR INSTALLATION IMPORTANT DreamLine® reserves the right to alter, modify or redesign products at any time

Installation steps for 6” hinge panel with Hinge Panel Glass Bracket

10UNIDOOR-X (STYLE M) manual Ver 2 11/2016

Plumb line

Out-of-plumb at the bottom

<Less than 90°

A Plumb line

**If the wall is out-of-plumb at the bottom, measure that dimension (A) and addit to the length of the U-channel ( 1/4” max):Finished cut length=Glass Width + 3/16” + dimension A

vertical U-channel

Hinge panelGlass bracket

1-9/16”

69-7/16”

6”

bottom U-channel**

Fig 4

Carpenter’sSquare

Model height of 72”

Fig 3

2. Cut the vertical U-channel to 69-7/16”. Cut the bottom U-channel** to 6”. (Fig 4)

1. Draw a line on the threshold and on the wall to represent the centerline of the U-channel. Make sure the line is parallel to the front edge of the threshold. (Fig 3)

©2017 DreamLine. All Rights Reserved

Page 12: UNIDOOR X (STYLE M3) · UNIDOOR-X Style M GLASS-TO-GLASS HINGE SHOWER DOOR INSTALLATION IMPORTANT DreamLine® reserves the right to alter, modify or redesign products at any time

11UNIDOOR-X (STYLE M) manual Ver 2 11/2016

Fig 6Fig 5

3. Position the U-channels and Hinge Panel Glass Bracket (#36) on the centerlines to mark the holes for drilling. (Fig 5)

4. Mark the hole positions on the centerline on the wall and threshold through the holes in the U-channels and the Hinge Panel Glass Bracket (#36). (Note that the Hinge Panel Glass Bracket (#36) is wider than the u-channel). (Fig 6)

©2017 DreamLine. All Rights Reserved

Page 13: UNIDOOR X (STYLE M3) · UNIDOOR-X Style M GLASS-TO-GLASS HINGE SHOWER DOOR INSTALLATION IMPORTANT DreamLine® reserves the right to alter, modify or redesign products at any time

12UNIDOOR-X (STYLE M) manual Ver 2 11/2016

Fig 8

Ø5/16"

(or Ø5/16" & anchor for tile)

Ø1/8"

Fig 7

5. Drill Ø5/16” holes in the wall and install the wall anchors. Drill Ø1/8” holes into an acrylic threshold (or Ø5/16” holes and anchors for a tile threshold). (Fig 7)

6. Apply silicone to the back of the U-channels and the screw holes, then install the U-channels and Hinge Panel Glass Bracket (#36) using the ST4.2 x 40mm screws (#23). (Fig 8)

©2017 DreamLine. All Rights Reserved

Page 14: UNIDOOR X (STYLE M3) · UNIDOOR-X Style M GLASS-TO-GLASS HINGE SHOWER DOOR INSTALLATION IMPORTANT DreamLine® reserves the right to alter, modify or redesign products at any time

13UNIDOOR-X (STYLE M) manual Ver 2 11/2016

Quick-drying/fast curing silicone isrecommended for the installation of hinge panel glass into u-channels.

Fig 10

Hinge PanelGlass Bracketwith gasket

8-3/8”

7-7/8”

top

bottom

Cut and install two 2”pcs of the 0.5 mm shims (#34)into the bottom U-channelto protect the corners of the glass

Fig 9

7. Add the 0.5mm shims into the bottom U-channel to protect the bottom corners of the glass. Apply a bead of silicone into the length of the U-channels. (Fig 9)

8. Install the Hinge Panel Glass (#32) into the U-channel, checking for level and plumb. Install the gasket into the Hinge Panel Glass Bracket. (Note: Make sure the top of the hinge panel glass is at the top). (Fig 10)

©2017 DreamLine. All Rights Reserved

Page 15: UNIDOOR X (STYLE M3) · UNIDOOR-X Style M GLASS-TO-GLASS HINGE SHOWER DOOR INSTALLATION IMPORTANT DreamLine® reserves the right to alter, modify or redesign products at any time

14UNIDOOR-X (STYLE M) manual Ver 2 11/2016

Fig 12

Fig 11

inside

9. Tighten the rubber-tipped set screws on the Hinge Panel Glass Bracket (#36) to secure the glass. Do Not overtighten! (Fig 11)

NOTE: Following the installation of the Hinge Panel Glass (#32), it is strongly recommended that the silicone be allowed to fully cure before hanging the door glass. (Fig 12)

!

Go to Step #18 on Page 21 to continue the installation of the Hinges, Door Glass and other components.

©2017 DreamLine. All Rights Reserved

Page 16: UNIDOOR X (STYLE M3) · UNIDOOR-X Style M GLASS-TO-GLASS HINGE SHOWER DOOR INSTALLATION IMPORTANT DreamLine® reserves the right to alter, modify or redesign products at any time

15UNIDOOR-X (STYLE M) manual Ver 2 11/2016

Fig 13

Fig 14

Metal File

Plumb line

Out-of-plumb at the bottom

<Less than 90°

A Plumb line

**If the wall is out-of-plumb at the bottom, measure that dimension as (A) and addit to the length of the U-channel ( +1/4” max):Finished cut length= 24” + A ORGlass Width + 3/16” + dimension A= Finished cut length

U-Channel 1

U-Channel 2

L

L

Installation steps for 24” hinge panel glass with L-Bracket

10. Cut the vertical U-channel 1 (#09) to 71”. (Fig 13)

TIP: Use a metal file to remove any burrs from the cut end of the U-channels before placing them onto the glass.

NOTE The vertical U-channel for the Hinge Panel glass will accomodate up to 1/4” for out-of-plumb. Do not exceed this amount.

11. Cut the bottom U-channel 2 (#29) to 24” (see note** below). (Fig 14)

©2017 DreamLine. All Rights Reserved

Page 17: UNIDOOR X (STYLE M3) · UNIDOOR-X Style M GLASS-TO-GLASS HINGE SHOWER DOOR INSTALLATION IMPORTANT DreamLine® reserves the right to alter, modify or redesign products at any time

16UNIDOOR-X (STYLE M) manual Ver 2 11/2016

inside

wall

inside

wall

inside

wall

inside

wall

0 1/8”

1 2

3 4

5

(or Ø5/16" & anchor for tile)

Fig 15

Install the bottom U-channel parallel to the outside edgeof the threshold

NOTE: If installing this hinge panel and door for one of the Unidoor-X enclosure configurations, it is important that the hinge panel is installed at the correct dimension for the enclosure model size. Refer to panel installation manual packaged with the panel glass for details and dimensions.

12. Position the U-channel 2 (bottom profile) (#29) onto the threshold, parallel to the outside edge. Mark the position of the U-channel and mark the position of the holes for drilling. You need to use at least 3 holes for the U-channel 2 (bottom profile) (#29): one near each end and one near the center.• Drill the holes into the threshold using an Ø1/8” drill bit. (Or use a Ø5/16” bit and anchor for tile) • Apply a bead of silicone to the bottom of the U-channel 2 (bottom profile) (#29) and attach it to the threshold using the ST4.2 x 40mm screws (#23)(Fig. 15)

©2017 DreamLine. All Rights Reserved

Page 18: UNIDOOR X (STYLE M3) · UNIDOOR-X Style M GLASS-TO-GLASS HINGE SHOWER DOOR INSTALLATION IMPORTANT DreamLine® reserves the right to alter, modify or redesign products at any time

17UNIDOOR-X (STYLE M) manual Ver 2 11/2016

waterproofsilicone2

3

1

inside

Fig 16

Fig 17

waterproofsilicone

5 6

1

4

213. Next, position the vertical U-channel 1 (#09) (wall profile) on top of the installed bottom U-channel. Use a level to plumb the U-channel 1 (#09) (wall profile) and mark the positions of the holes for drilling. You need to use at least four holes for the U-channel 1 (#09) (wall profile).

• Drill the holes into the wall using a Ø5/16” drill bit.

• Insert the Wall Anchors (#13) into the 5/16” holes.

• Apply silicone to the back of the U-channel 1 (#09) (wall profile) and attach it to the wall using the ST4.2 x 40mm screws (#23). (Fig 16)

14. Add several 2” pieces of the 0.5mm Adjustment Spacers (#34) into the bottom U-channel to protect the bottom and corners of the glass. Apply a good quality mildew-resistant silicone into both U-channels. (Fig 17)

©2017 DreamLine. All Rights Reserved

Page 19: UNIDOOR X (STYLE M3) · UNIDOOR-X Style M GLASS-TO-GLASS HINGE SHOWER DOOR INSTALLATION IMPORTANT DreamLine® reserves the right to alter, modify or redesign products at any time

18 UNIDOOR-X (STYLE M) manual Ver 2 11/2016

top

2

3 4

inside

wall

1

Fig 18

Fig 19

NOTE: There is a top and a bottom to the Hinge Panel Glass (#32): The top hinge cutout is 7-7/8” to center, the bottom hinge cutout is 8-3/8” to center. The hinge panel glass must be installed correctly so that the door glass can be installed correctly.

15. Install the Hinge Panel glass (#32) into the U-channel 2 (#29) (bottom profile) and the U-channel 1 (#09) (wall profile). Apply a dab of silicone to the exposed end of the bottom u-channel. (Fig 18 and 19)

©2017 DreamLine. All Rights Reserved

Page 20: UNIDOOR X (STYLE M3) · UNIDOOR-X Style M GLASS-TO-GLASS HINGE SHOWER DOOR INSTALLATION IMPORTANT DreamLine® reserves the right to alter, modify or redesign products at any time

19 UNIDOOR-X (STYLE M) manual Ver 2 11/2016

L- Bracket Assembly Parts List**

35.1 PVC spacer 1 pc 35.6 Wall plate 1 pc35.2 Rubber tip set screw 2 pcs 35.7 Truss Head Screw ST 4.2 x 40 2 pcs35.3 L-Bracket (left hand shown) 1 pc 35.8 Flat head Screw M5 x 14 2 pcs35.4 Decorative cover 1 pc 35.9 Wall Plate adjustment set screw 2 pcs35.5 Ø5/16” Wall anchor 6 pcs

35.9

35.1

35.2

35.3

35.4

35.8

35.7

35.6

35.5

**L- Bracket Assembly not included with the 6” hinge panel

Installation steps for 24” hinge panel glass with L-Bracket

©2017 DreamLine. All Rights Reserved

Page 21: UNIDOOR X (STYLE M3) · UNIDOOR-X Style M GLASS-TO-GLASS HINGE SHOWER DOOR INSTALLATION IMPORTANT DreamLine® reserves the right to alter, modify or redesign products at any time

20UNIDOOR-X (STYLE M) manual Ver 2 11/2016

87Max 3/16”(4mm)

Max 3/16”(4mm)

5 6

2 31

Ø5/16"(8mm)

4

Fig 20

Fig 21

(Left-hand bracket installation shown)

16. Position the L-Bracket assembly (#35) onto the Hinge Panel Glass (#32) as shown and mark its position on the wall. Remove the Wall Plate (#35.6) from the L-bracket. Hold the Wall Plate (#35.6) to the marks on the wall. Check for level and mark the holes for drilling through the wider, untapped holes. (Fig 20.2) Drill two Ø5/16”(8mm) holes and insert the Ø5/16” Wall anchors (#35.5). (Fig 20)

17. Attach the Wall Plate (#06) to the wall using the ST4.2 x 40 (#35.7) screws.Re-attach the L-Bracket (#35.3) to the Wall Plate (#35.6) using the Flat Head Screw M5x14 (#35.8) and adjust the angle if necessary by using the Wall Plate Adjustment Set Screws (#35.9).(Fig 21.7 and 21.8)

©2017 DreamLine. All Rights Reserved

Page 22: UNIDOOR X (STYLE M3) · UNIDOOR-X Style M GLASS-TO-GLASS HINGE SHOWER DOOR INSTALLATION IMPORTANT DreamLine® reserves the right to alter, modify or redesign products at any time

21UNIDOOR-X (STYLE M) manual Ver 2 11/2016

Fig 22

Fig 23

1110

Right-hand bracket installation Left-hand bracket installation

9

0-1/16”(2mm)

NOTE: The left-hand L-bracket installation is shown. Follow the same steps forinstalling the right-hand L-bracket.

18. Adjust the Stationary Glass to plumb and tighten the screws. Attach the Decorative Cover (#35.4). Secure the L-Bracket (#35.5) to the top of the Stationary Glass using the clear gasket and rubber-tipped set screws. Do not overtighten! (Fig 22)

©2017 DreamLine. All Rights Reserved

Page 23: UNIDOOR X (STYLE M3) · UNIDOOR-X Style M GLASS-TO-GLASS HINGE SHOWER DOOR INSTALLATION IMPORTANT DreamLine® reserves the right to alter, modify or redesign products at any time

22UNIDOOR-X (STYLE M) manual Ver 2 11/2016

1

hinge panel

Fig 24

Install the hinges flush with the edge of the Hinge Panel Glass

hinge panel glass

2mm hinge gasket

19. Attach the Hinges (#05) to the Hinge Panel Glass (#32) with the bolts facing inside the shower. Install the hinges onto the Hinge Panel Glass (#32) flush with the edge of the glass. Use at least one 2mm hinge gasket per side. Tighten the hinge bolts evenly and snap in the decorative bolt caps. (Figs 24 and 25)

!

NOTE: Do not attach the handle to the door glass until instructed.Do not attempt to lift the door glass with the handle as this may result in damage to the glass and/or serious personal injury. Use a professional grade glass suction cup and an assistant when handling heavy glass.

NOTE: These adjustable hinges are factory set to overclose. See Page 27 for instructions regarding the adjustment features of these hinges.

©2017 DreamLine. All Rights Reserved

Page 24: UNIDOOR X (STYLE M3) · UNIDOOR-X Style M GLASS-TO-GLASS HINGE SHOWER DOOR INSTALLATION IMPORTANT DreamLine® reserves the right to alter, modify or redesign products at any time

23UNIDOOR-X (STYLE M) manual Ver 2 11/2016

Use the 5/8” spacers includedwith the door glass

5/8"

5/8” spacer

Fig 26

Fig 25

Door Glass

3

doorglass

2 doorglass

2mm hinge gasket

inside

outside

1

5/8”

21. Mount the Handle (#02) to the Glass door (#01).(Fig 26)

** NOTE: It is strongly recommended that the 5/8” shims be left beneath the door glass until the silicone securing the hinge panel glass has fully cured.

20. The Door Glass (#01) ships with four 5/8” spacers attached to the top (2pcs) and bottom (2pcs). These 5/8” spacers will create the proper spacing at the bottom of the door glass and will ensure the installed door height finishes at 72”, but always confirm with a measurement.

Set the Door Glass (#01) with the 5/8“ spacers attached onto the threshold, inline with the Hinge Panel Glass (#32).Level up the Door Glass (#01) with the Hinge Panel Glass (#32) and fasten the hinges onto the Door Glass (#01) using one 2mm hinge gasket per side. Make sure the top edges of the Door Glass (#01) and Hinge Panel Glass (#32) are aligned and that there is an even reveal between the door and panel glass.

Remove the 5/8” spacers from beneath the Door Glass (#01) once the hinge panel glass is fully secured.** (Figs 24 and 25)

©2017 DreamLine. All Rights Reserved

Page 25: UNIDOOR X (STYLE M3) · UNIDOOR-X Style M GLASS-TO-GLASS HINGE SHOWER DOOR INSTALLATION IMPORTANT DreamLine® reserves the right to alter, modify or redesign products at any time

24UNIDOOR-X (STYLE M) manual Ver 2 11/2016

2

4

Door

1”

1 2 3 4

5 6 7 8

Around Bottom sweep

measure

measure

1Handle side of door

Fig 28

Fig 27

3

Panel

22. Measure the bottom of the Door Glass (#01) from side to side to determine the actual width of the door. Cut the Bottom Anti-Water Strip (#07) to the size of your measurement and notch 3/8” of the inner side of the Bottom Anti-Water Strip (#07) as shown in Fig 27.2.Press the Bottom Anti-Water Strip (#07) onto the bottom edge of the Glass Door (#01).

NOTE: Make sure the Bottom Anti-Water Strip (#07) is flush to the vertical edge of the handle side of the Door Glass (#01). (Fig 27)

23. To install the Flanged Anti-Water Strip (#33), take three measurements :• from the top edge of the Door Glass (#01) to the top of the center portion of the top Hinge (#06) (see Fig 28.1 for an example to use for taking all three measurements)• from the bottom of the center portion of the top Hinge to the top of the center portion of the bottom Hinge (#05) • from the bottom of the center portion of the bottom Hinge (#05) to the threshold

Cut the Flanged Anti-Water Strip (#33) according to these measurements. Notch the cut strips to slide them into the hinges and around the installed Bottom Anti-Water Strip (#07) to cover the space between both glass panels. Open the door and press the cut strips onto the vertical edge of the Door Glass (#01) so they will overlap the panel glass. (Fig. 28)

©2017 DreamLine. All Rights Reserved

Page 26: UNIDOOR X (STYLE M3) · UNIDOOR-X Style M GLASS-TO-GLASS HINGE SHOWER DOOR INSTALLATION IMPORTANT DreamLine® reserves the right to alter, modify or redesign products at any time

25UNIDOOR-X (STYLE M) manual Ver 2 11/2016

2

1

Fig 30

Fig 29

Inside shower

Inside shower

For Style M only: If your model does not include additional panel glass, proceed to the next step to install the L-shaped Strip (#08) to the wall.

24. With the door closed, place the L-shaped Strip (#08) on the door edge and mark its location on the wall.Please note that the corner of the L-shaped Strip (#08) should face into the shower. (Fig 29.1 and 29.2)With the door open, remove the tape backing from the adhesive strip and firmly press the L-shaped Strip (#08) to the wall. Allow time for the adhesive to set before allowing the door to close against the L-shaped Strip (#08). (Fig 29)

NOTE:The above procedure for installing the L-shaped Strip (#08) is for the Unidoor Style M shower door only. If installing another model, please refer to the separate panel glass installation manual located in the glass packaging for model specific instructions. Hinges set to overclose require the use of the L-shaped Strip (#08) or other strike vinyl that ships with the panel glass.

ATTENTION: Prior to the next step, please be sure the section of the wall where you need to attach the L-shaped Strip (#08) is clean, dry, and free from soap, oil or any construction debris.

©2017 DreamLine. All Rights Reserved

Page 27: UNIDOOR X (STYLE M3) · UNIDOOR-X Style M GLASS-TO-GLASS HINGE SHOWER DOOR INSTALLATION IMPORTANT DreamLine® reserves the right to alter, modify or redesign products at any time

26UNIDOOR-X (STYLE M) manual Ver 2 11/2016

Fig 31

24Hours

NOTE: If your model includes additional panel glass, please find the manual for the panel glass installation in the panel glass packaging. (See page 4 for details)

25. With the door open, apply a good quality mildew-resistant/waterproof silicone along the connection of both U-Channels to the wall and threshold on the inside of the shower.

NOTE: The surface needs to be clean and free of debris before applying silicone. Let the silicone cure before closing the door to avoid contact with the Bottom anti-water strip (#33) (Fig. 31)

26. Allow 24 hours for the silicone to fully cure before using the shower.

©2017 DreamLine. All Rights Reserved

Page 28: UNIDOOR X (STYLE M3) · UNIDOOR-X Style M GLASS-TO-GLASS HINGE SHOWER DOOR INSTALLATION IMPORTANT DreamLine® reserves the right to alter, modify or redesign products at any time

27UNIDOOR-X (STYLE M) manual Ver 2 11/2016

©2017 DreamLine. All Rights Reserved

Page 29: UNIDOOR X (STYLE M3) · UNIDOOR-X Style M GLASS-TO-GLASS HINGE SHOWER DOOR INSTALLATION IMPORTANT DreamLine® reserves the right to alter, modify or redesign products at any time

NOTE: To maximize the life of your door, it is important to regularly inspect the glass and other hardware for misalignment, proper attachment, and/or damage. Contact DreamLine with any questions or concerns.

Product Maintenance

BASES and BACKWALLS: To ensure long lasting life for your acrylic back walls: wipe them off after each use with a soft cloth. To clean the acrylic back walls use non-abrasive sprays or cream based cleaners. Avoid the use of aerosol spray cleaners. Never use abrasive cleansers, metal brushes or scrapers that could scratch or dull the surface.

GLASS: To ensure long lasting life for your glass shower products: wipe them off after each use with a soft cloth. Rinse and wipe off the glass using either a soft cloth or a squeegee to prevent soap buildup and water spots (Hard water can etch the surface of the glass over time if left to dry). To prevent scratching the surface: never use abrasive cleaners or cleaning products that contain scouring agents. Never use bristle brushes or abrasive sponges that may scratch the surface.

HARDWARE: To ensure a long lasting finish: wipe off the metal parts after each use with a soft cloth. Do not use abrasive cleaners or cleaning products containing ammonia, bleach or acid. If accidentally used, rinse the surface as soon as possible to prevent damage to the finish (peeling or corrosion). After cleaning the polished finishes, rinse thoroughly and wipe dry with soft cloth. Clean stainless steel surfaces at least once a week. When applying stainless steel cleaner or polish to stainless steel hardware, work with (not across) the grain. Never use an abrasive sponge or cloth, steel wool or wired brush as these may permanently scratch the surfaces.

28

©2017 DreamLine. All Rights Reserved

Page 30: UNIDOOR X (STYLE M3) · UNIDOOR-X Style M GLASS-TO-GLASS HINGE SHOWER DOOR INSTALLATION IMPORTANT DreamLine® reserves the right to alter, modify or redesign products at any time

TEL: 866-731-2244FAX: 866-857-3638DREAMLINE.COM

For more information on DreamLine® Shower Doors and Enclosures please visit DreamLine.com

©2017 DreamLine. All Rights Reserved

Page 31: UNIDOOR X (STYLE M3) · UNIDOOR-X Style M GLASS-TO-GLASS HINGE SHOWER DOOR INSTALLATION IMPORTANT DreamLine® reserves the right to alter, modify or redesign products at any time

UNIDOOR PLUS (STYLE I) manual Ver 1 Rev 6 10/2016 1

UNIDOOR PLUS (STYLE I)

SHOWER ENCLOSURE GLASS PANEL INSTALLATION INSTRUCTIONS

IMPORTANT

DreamLine® reserves the right to alter, modify or redesign products at any time without prior notice.

For the latest up-to-date technical drawings, manuals, warranty information or additional details

please refer to your model’s web page on DreamLine.com

Please read these instructions carefully before installing. If you have any questions regarding

installation, please contact our technical support specialists Monday through Friday 8AM –

7PM and Saturday 9AM-5PM EST at Phone: 1-866-731-2244, Fax: 1-866-857-3638 or e-mail our

technical support group at [email protected]

For more information about DreamLine®

products please visit DreamLine.com

Style I STYLE I Right side panel installation shown

ATTENTION: This model is also available with the Half Frosted Band glass option.

Please see specific installation instructions on page 2 when applicable.

©2017 DreamLine. All Rights Reserved

Page 32: UNIDOOR X (STYLE M3) · UNIDOOR-X Style M GLASS-TO-GLASS HINGE SHOWER DOOR INSTALLATION IMPORTANT DreamLine® reserves the right to alter, modify or redesign products at any time

UNIDOOR PLUS (STYLE I) manual Ver 1 Rev 6 10/2016 2

Style “I”: Half Frosted Band Glass Installation

This model features the half frosted glass option. Hinged Left installation shown. To install

for hinged Right, flip the door and panels to the proper handing.

NOTE: The textured surface of both the stationary glass and door glass should face outside

of the shower.

Hinged Left installation Hinged Right installation

©2017 DreamLine. All Rights Reserved

Page 33: UNIDOOR X (STYLE M3) · UNIDOOR-X Style M GLASS-TO-GLASS HINGE SHOWER DOOR INSTALLATION IMPORTANT DreamLine® reserves the right to alter, modify or redesign products at any time

UNIDOOR PLUS (STYLE I) manual Ver 1 Rev 6 10/2016 3

Model#s: SHEN-24290300

SHEN-24290340

SHEN-24295300

SHEN-24295340

SHEN-24300300

SHEN-24300340

SHEN-24305300

SHEN-24305340

SHEN-24310300

SHEN-24310340

SHEN-24315300

SHEN-24315340

SHEN-24320300

SHEN-24320340

SHEN-24325300

SHEN-24325340

SHEN-24330300

SHEN-24330340

SHEN-24335300

SHEN-24335340

SHEN-24340300

SHEN-24340340

SHEN-24345300

SHEN-24345340

SHEN-24350300

SHEN-24350340

SHEN-24355300

SHEN-24355340

SHEN-24360300

SHEN-24360340

SHEN-24365300

SHEN-24365340

SHEN-24290300-HFR

SHEN-24290340-HFR

SHEN-24295300-HFR

SHEN-24295340-HFR

SHEN-24300300-HFR

SHEN-24300340-HFR

SHEN-24305300-HFR

SHEN-24305340-HFR

SHEN-24310300-HFR

SHEN-24310340-HFR

SHEN-24315300-HFR

SHEN-24315340-HFR

SHEN-24320300-HFR

SHEN-24320340-HFR

SHEN-24325300-HFR

SHEN-24325340-HFR

SHEN-24330300-HFR

SHEN-24330340-HFR

SHEN-24335300-HFR

SHEN-24335340-HFR

SHEN-24340300-HFR

SHEN-24340340-HFR

SHEN-24345300-HFR

SHEN-24345340-HFR

SHEN-24350300-HFR

SHEN-24350340-HFR

SHEN-24355300-HFR

SHEN-24355340-HFR

SHEN-24360300-HFR

SHEN-24360340-HFR

SHEN-24365300-HFR

SHEN-24365340-HFR

Model#s: SHEN-24370300

SHEN-24370340

SHEN-24375300

SHEN-24375340

SHEN-24380300

SHEN-24380340

SHEN-24385300

SHEN-24385340

SHEN-24390300

SHEN-24390340

SHEN-24395300

SHEN-24395340

SHEN-24400300

SHEN-24400340

SHEN-24405300

SHEN-24405340

SHEN-24410300

SHEN-24410340

SHEN-24415300

SHEN-24415340

SHEN-24420300

SHEN-24420340

SHEN-24425300

SHEN-24425340

SHEN-24430300

SHEN-24430340

SHEN-24435300

SHEN-24435340

SHEN-24440300

SHEN-24440340

SHEN-24445300

SHEN-24445340

SHEN-24370300-HFR

SHEN-24370340-HFR

SHEN-24375300-HFR

SHEN-24375340-HFR

SHEN-24380300-HFR

SHEN-24380340-HFR

SHEN-24385300-HFR

SHEN-24385340-HFR

SHEN-24390300-HFR

SHEN-24390340-HFR

SHEN-24395300-HFR

SHEN-24395340-HFR

SHEN-24400300-HFR

SHEN-24400340-HFR

SHEN-24405300-HFR

SHEN-24405340-HFR

SHEN-24410300-HFR

SHEN-24410340-HFR

SHEN-24415300-HFR

SHEN-24415340-HFR

SHEN-24420300-HFR

SHEN-24420340-HFR

SHEN-24425300-HFR

SHEN-24425340-HFR

SHEN-24430300-HFR

SHEN-24430340-HFR

SHEN-24435300-HFR

SHEN-24435340-HFR

SHEN-24440300-HFR

SHEN-24440340-HFR

SHEN-24445300-HFR

SHEN-24445340-HFR

Model#s: SHEN-24450300

SHEN-24450340

SHEN-24455300

SHEN-24455340

SHEN-24460300

SHEN-24460340

SHEN-24465300

SHEN-24465340

SHEN-24470300

SHEN-24470340

SHEN-24475300

SHEN-24475340

SHEN-24480300

SHEN-24480340

SHEN-24485300

SHEN-24485340

SHEN-24490300

SHEN-24490340

SHEN-24495300

SHEN-24495340

SHEN-24500300

SHEN-24500340

SHEN-24505300

SHEN-24505340

SHEN-24510300

SHEN-24510340

SHEN-24515300

SHEN-24515340

SHEN-24520300

SHEN-24520340

SHEN-24525300

SHEN-24525340

SHEN-24450300-HFR

SHEN-24450340-HFR

SHEN-24455300-HFR

SHEN-24455340-HFR

SHEN-24460300-HFR

SHEN-24460340-HFR

SHEN-24465300-HFR

SHEN-24465340-HFR

SHEN-24470300-HFR

SHEN-24470340-HFR

SHEN-24475300-HFR

SHEN-24475340-HFR

SHEN-24480300-HFR

SHEN-24480340-HFR

SHEN-24485300-HFR

SHEN-24485340-HFR

SHEN-24490300-HFR

SHEN-24490340-HFR

SHEN-24495300-HFR

SHEN-24495340-HFR

SHEN-24500300-HFR

SHEN-24500340-HFR

SHEN-24505300-HFR

SHEN-24505340-HFR

SHEN-24510300-HFR

SHEN-24510340-HFR

SHEN-24515300-HFR

SHEN-24515340-HFR

SHEN-24520300-HFR

SHEN-24520340-HFR

SHEN-24525300-HFR

SHEN-24525340-HFR

Model#s: SHEN-24530300

SHEN-24530340

SHEN-24535300

SHEN-24535340

SHEN-24540300

SHEN-24540340

SHEN-24545300

SHEN-24545340

SHEN-24550300

SHEN-24550340

SHEN-24555300

SHEN-24555340

SHEN-24560300

SHEN-24560340

SHEN-24565300

SHEN-24565340

SHEN-24570300

SHEN-24570340

SHEN-24575300

SHEN-24575340

SHEN-24580300

SHEN-24580340

SHEN-24585300

SHEN-24585340

SHEN-24590300

SHEN-24590340

SHEN-24595300

SHEN-24595340

SHEN-24600300

SHEN-24600340

SHEN-24605300

SHEN-24605340

SHEN-24530300-HFR

SHEN-24535300-HFR

SHEN-24530340-HFR

SHEN-24535340-HFR

SHEN-24540300-HFR

SHEN-24545300-HFR

SHEN-24540340-HFR

SHEN-24545340-HFR

SHEN-24550300-HFR

SHEN-24555300-HFR

SHEN-24550340-HFR

SHEN-24555340-HFR

SHEN-24560300-HFR

SHEN-24565300-HFR

SHEN-24560340-HFR

SHEN-24565340-HFR

SHEN-24570300-HFR

SHEN-24575300-HFR

SHEN-24570340-HFR

SHEN-24575340-HFR

SHEN-24580300-HFR

SHEN-24585300-HFR

SHEN-24580340-HFR

SHEN-24585340-HFR

SHEN-24590300-HFR

SHEN-24595300-HFR

SHEN-24590340-HFR

SHEN-24595340-HFR

SHEN-24600300-HFR

SHEN-24605300-HFR

SHEN-24600340-HFR

Finishes: -01 Chrome -04 Brushed Nickel -06 Oil Rubbed Bronze -09 Satin Black HFR= Half Frosted Band

©2017 DreamLine. All Rights Reserved

Page 34: UNIDOOR X (STYLE M3) · UNIDOOR-X Style M GLASS-TO-GLASS HINGE SHOWER DOOR INSTALLATION IMPORTANT DreamLine® reserves the right to alter, modify or redesign products at any time

UNIDOOR PLUS (STYLE I) manual Ver 1 Rev 6 10/2016 4

ADDITIONAL MODEL CONFIGURATIONS for UNIDOOR-X GLASS-TO-GLASS HINGE DOORS

Model#s:

E1230630-##

E1230634

E12306530

E12306534

E1233030

E1233034

E12330530

E12330534

E1240630

E1240634

E1243030

E1243034

E1251430

E1251434

E12514530

E12514534

E1261430

E1261434

E12614530

E12614534

E1271430

E1271434

E12714530

E12714534

E1281430

E1281434

E1292230

E1292234

E12922530

E12922534

E1302230

E1302234

E13022530

E13022534

E3270630L

E3270630R

E3270634L

E3270634R

E32706530L

E32706530R

E32706534L

E32706534R

E3280630L

E3280630R

E3280634L

E3280634R

E32806530L

E32806530R

E32806534L

E32806534R

E3290630L

E3290630R

E3290634L

E3290634R

E32906530L

E32906530R

E32906534L

E32906534R

E3300630L

E3300630R

E3300634L

E3300634R

Finishes: -01 Chrome -04 Brushed Nickel -06 Oil Rubbed Bronze -09 Satin Black HFR= Half Frosted Band

©2017 DreamLine. All Rights Reserved

Page 35: UNIDOOR X (STYLE M3) · UNIDOOR-X Style M GLASS-TO-GLASS HINGE SHOWER DOOR INSTALLATION IMPORTANT DreamLine® reserves the right to alter, modify or redesign products at any time

UNIDOOR PLUS (STYLE I) manual Ver 1 Rev 6 10/2016 5

Preparation

1. Prior to installation, examine all boxes and packages for shipping damage and compare the piece

count with your packing slip. After opening all boxes and packages read this introduction carefully.

Check that all of the needed parts are included in the package by checking off the components on

the “Detailed Diagram of Shower Door Components”. If the unit has been damaged, has a

finishing defect, or has missing parts, please contact our customer support department within

3 business days of the delivery date. Please note that DreamLine® will not replace any

damaged products or missing parts free of charge after 3 business days or if the product has

been installed. Feel free to contact DreamLine® if you have any questions, and please provide an

order number, job name or other proof of purchase to help us identify your original order.

2. Please note that you should consult your local building codes with questions on installation

compliance standards. Building and plumbing codes may vary by location, and DreamLine is

not responsible for code compliance standards for your project and will not accept any

returns.

3. If this unit is going to be installed in new construction, please install all of the required plumbing

and drainage before installing the shower. Use a competent and licensed (if required by local

code) plumber for all plumbing installation.

4. Prior to the installation, please ensure that the installation surface is level and solid and will be

able to support the total weight of the unit. Also make sure that the walls are plumb. Depending

on the type of unit you are installing, some adjustments in leveling may be possible. However,

irregular installation, surface level or out of square conditions can result in serious problems for

your installation. Please note that some adjustments and drilling may be necessary. Please protect

all primary surfaces of the product during installation. Never set your glass down directly onto a

tile floor. Always use a piece of wood or cardboard to protect the bottom edge and corners of the

glass.

5. Note: The installation of this unit requires that you drill down into the threshold.

6. This model requires a minimum 5/8” of flat threshold space for installation.

7. This model has 1/2” of adjustment within the u-channel on the stationary panel side for

out-of-plumb wall conditions and overall width within the model size. Confirm the finished

opening conditions before proceeding with the installation.

8. Professional installation recommended.

NOTE: This model is reversible for left or right hand installation. This manual will show the right

side panel installation. For a left side panel installation, simply begin on the opposite wall and

reverse the orientation of the parts as necessary.

©2017 DreamLine. All Rights Reserved

Page 36: UNIDOOR X (STYLE M3) · UNIDOOR-X Style M GLASS-TO-GLASS HINGE SHOWER DOOR INSTALLATION IMPORTANT DreamLine® reserves the right to alter, modify or redesign products at any time

UNIDOOR PLUS (STYLE I) manual Ver 1 Rev 6 10/2016 6

Tools Required

CaulkTapeMeasure Pencil Screwdriver

Phillips Drill bit

Level GunCaulk

DrillElectric Hammer

Drill bit(Ø=5/16") (Ø=1/8")

Miter sawMallet Wood

Painters Tape

©2017 DreamLine. All Rights Reserved

Page 37: UNIDOOR X (STYLE M3) · UNIDOOR-X Style M GLASS-TO-GLASS HINGE SHOWER DOOR INSTALLATION IMPORTANT DreamLine® reserves the right to alter, modify or redesign products at any time

UNIDOOR PLUS (STYLE I) manual Ver 1 Rev 6 10/2016 7

Detailed Diagram of Glass Panel Components

Packing List

09 U-channel 1 (76”, wall profile) 1pc 23 Countersunk screw ST4.2x40 14pcs

11 Stationary glass 1pc 26 Return panel glass 1pc

13 Ø5/16” Wall anchor 14pcs 28 Adjustment Spacer 6pcs

19 Anti-Water strip (inline panel) 1pc 29 U-channel 2 (44”, bottom profile) 2pcs

20 Anti-Water strip (enclosure) * 1pc 30 90° Corner Bracket 1pc

NOTE: Unpack your unit carefully and inspect it. Lay it out and identify all parts using the detailed

diagram and packing list in your manual as a reference. Before discarding the carton, check for small

hardware bags that may have fallen to the bottom of the box. If any parts are damaged or missing,

please contact DreamLine® for replacement. The shipping boxes may contain extra parts not used in

your model configuration.

NOTE: Retain these installation instructions for future reference.

* ATTENTION: Anti-Water strip (enclosure) (20) used for 30”- 34” return stationary panel

Installation (STYLE L) only.

28

23

19

13

30

20

29 29

2611

9

The glass surface

with the ClearMax™

label must be

installed to face

inside of the shower

©2017 DreamLine. All Rights Reserved

Page 38: UNIDOOR X (STYLE M3) · UNIDOOR-X Style M GLASS-TO-GLASS HINGE SHOWER DOOR INSTALLATION IMPORTANT DreamLine® reserves the right to alter, modify or redesign products at any time

UNIDOOR PLUS (STYLE I) manual Ver 1 Rev 6 10/2016 8

Style “I”: In-Line Panel with 30”-34” Return Panel Installation

NOTE: The Unidoor shower door needs to be installed

prior to proceeding with the following Stationary and

Return Glass installation instructions. Please see the

Single Shower Door installation manual included in

the door packaging for complete shower door

installation instructions. Before you begin the

installation, please recheck your shower opening size.

Specific size information can be found using the “SKU

TO GLASS SIZE GUIDE” below.

NOTE: The installation of this enclosure requires two

installers.

NOTE: Use parts from “Detailed Diagram of Glass

Panel Components” for the glass panel assembly and

installation.

1. Please locate and record the SKU numbers found on the packaging of both glass panels and door.

You will specifically need all Product Width values to calculate your Shower Enclosure size.

©2017 DreamLine. All Rights Reserved

Page 39: UNIDOOR X (STYLE M3) · UNIDOOR-X Style M GLASS-TO-GLASS HINGE SHOWER DOOR INSTALLATION IMPORTANT DreamLine® reserves the right to alter, modify or redesign products at any time

UNIDOOR PLUS (STYLE I) manual Ver 1 Rev 6 10/2016 9

2. Please mark measurement lines on the wall and

threshold for the Glass Door and U-channel

according to the size of your model.

You will need to use the Product Width values

determined in step #1 in Size Table A.

Please Note that these dimensions are nominal

dimensions and not actual glass sizes.

NOTE: M and L dimensions are from the finished

wall to the outside of the U-channel as shown in

Fig. 1.

NOTE: The Unidoor hinge is factory set to over close 8°.

The following procedure is recommended to ensure

proper alignment of the panel glass and door.

3. Align the Door so that it is perpendicular to the wall and

parallel to the threshold. Measure across the bottom span of

the Door and threshold on the outside of shower and

determine an equal value.

Mark a line on the threshold base on the handle side to assist

with aligning the inline panel glass.

See Fig. 2 for details.

L

Door

Panel

Return Panel

L-1/16"M

L

M

M = +Door Panel 1/8"

L = Return Panel + 7/16"

Fig. 1

Size Table A

Size Table A

Value

inside

outside

outside

inside

Door

Fig. 2

2

1

©2017 DreamLine. All Rights Reserved

Page 40: UNIDOOR X (STYLE M3) · UNIDOOR-X Style M GLASS-TO-GLASS HINGE SHOWER DOOR INSTALLATION IMPORTANT DreamLine® reserves the right to alter, modify or redesign products at any time

UNIDOOR PLUS (STYLE I) manual Ver 1 Rev 6 10/2016 10

H

4. Measure the actual width of your Return

panel glass (26) panel.

NOTE: You will be doing straight and 45°

cuts for this enclosure installation.

*All 45° cuts are from the outside

dimension. (tip to tip)

*It may be necessary to remove any

burrs from the cut end of the U-channels

with a metal file before placing the U-

channel onto the glass.

Use a miter saw to rough straight cut one

of the U-channel 2 (44”, bottom profiles)

(29) to the actual width of the glass (+) 1-

1/4”.

See Fig. 3 & 4 for details.

Fig. 3

W (+) 1 1/4"

Fig. 4

©2017 DreamLine. All Rights Reserved

Page 41: UNIDOOR X (STYLE M3) · UNIDOOR-X Style M GLASS-TO-GLASS HINGE SHOWER DOOR INSTALLATION IMPORTANT DreamLine® reserves the right to alter, modify or redesign products at any time

UNIDOOR PLUS (STYLE I) manual Ver 1 Rev 6 10/2016 11

H

5. Slip the cut U-channel 2 (44”, bottom profile) (29)

and uncut U-channel 1 (76”, wall profile) (09) onto

the Return panel glass (26) in the shown locations.

Insert three to four 2” pieces of the Adjustment

spacer (#28) into the bottom u-channel (#29) as

necessary to level the panel glass. (Fig.5.1)

With the door open, place the Return panel glass on

the threshold adjacent to door and in line with the

wall mark. Adjust the Return panel glass and

U-channel 1 (wall profile) against the wall to

compensate for any out of plumb conditions

ensuring that the Return panel glass is level

vertically and U-channel 1 is flush with the wall.

Mark the U-channel 2 (bottom profile) end

opposite of the wall at the exposed vertical glass

edge.

Remove the U-channel 2 (bottom profile). Leave

the U-channel 1 (wall profile) on the Return panel

glass. Set the Return panel glass aside.

Cut the U-channel 2 (bottom profile) 45° to the

mark (+) 1/2”. The end facing the wall will remain

straight.

Slip the U-channel 2 (bottom profile)

back onto the Return panel glass and set

the Return panel glass aside.

See Fig. 5 for details.

6. Measure the actual width of your

Stationary glass (11) panel.

Use a miter saw to cut the second U-

channel 2 (44”, bottom profile) (29) 45°

to the actual width of the glass (+) 1/16”.

See Fig. 6 & 7 for details.

wall

inside

Return

glass

U-channel 2

U-channel 1

inside

mark + 1/2"

45° inside

Fig. 5

1

3

5

2

4

6

Fig. 6

©2017 DreamLine. All Rights Reserved

Page 42: UNIDOOR X (STYLE M3) · UNIDOOR-X Style M GLASS-TO-GLASS HINGE SHOWER DOOR INSTALLATION IMPORTANT DreamLine® reserves the right to alter, modify or redesign products at any time

UNIDOOR PLUS (STYLE I) manual Ver 1 Rev 6 10/2016 12

7. Slip the U-channel 2 (44”, bottom profile) (29)

onto the Stationary glass (11) and ensure that the

straight end of the U-channel 2 is flush with the

vertical glass edge.

Press the Anti-Water strip (inline panel) (19) onto

the vertical edge of the Stationary glass allowing the

base of the strip to rest on top of the U-channel.

Carefully butt the Stationary glass and Return panel

glass (26) together to form a tight corner from

bottom to top. The Stationary glass will be in front

of the Return panel glass.

While securely holding the two glass panels, attach

the 90° Corner Bracket (30) to the top corner.

Ensure that the 90° Corner Bracket is square and

gaskets are aligned properly before tightening the

glass holding screws.

Temporarily secure the bottom corner of the glass

panels with a generous strip of Painters tape.

See Fig. 8 & 9 for details.

W (+) 1/16"

45°

Fig. 7

1

3

2 5

W1

4 outside

inside

Return glass

Stationary glass

outside

inside

Return

glass

Stationary

glass

outside

inside outside

Painters tape

inside

Fig. 8

1

3

5

2

4

6

NOTE: The top of the Enclosure glass

must be level with the Glass door. By

using a level across the top of both the

In-line Stationary panel glass (11) and

door, height differences can be

measured. The Adjustment spacers (28)

are provided for the Return panel glass

(26) only to compensate for such

differences by inserting them into the

U-Channel 2 (bottom profile) (29).

Please use the correct spacer size that is

needed for your situation.

©2017 DreamLine. All Rights Reserved

Page 43: UNIDOOR X (STYLE M3) · UNIDOOR-X Style M GLASS-TO-GLASS HINGE SHOWER DOOR INSTALLATION IMPORTANT DreamLine® reserves the right to alter, modify or redesign products at any time

UNIDOOR PLUS (STYLE I) manual Ver 1 Rev 6 10/2016 13

8. Carefully butt the Return panel glass (26) up against

the wall vertically according to the M value stated in

Size Table A on page 5. Intermittently use a level

throughout these steps to ensure that this glass

enclosure is leveled properly.

While securely holding the glass panels, close the

Glass Door and align the Stationary glass (11) to it.

Use the door mark on the threshold as a reference to

ensure that the Door is perpendicular to the wall.

If needed, adjust the position of the Stationary glass

and Return panel glass so that the Anti-Water strip

(inline panel) (19) makes tight contact to the Glass

Door from top to bottom. The U-channel 1 (wall

profile) (09) will remain flush against the wall.

Outline the position of the glass panels along the

inside bottom edge of all U-channels on the

threshold and wall.

Mark the U-channel 1 (wall profile) (09) at the top

horizontal glass edge.

See Fig. 10 for details.

1

3

2 5

W1

4

Door

inside

wall

inside

insidewall

U-channel 1

M

outside

outside

inside

Align stationary glass

and glass doorinside

1/16"-1/8"

Stationary

glass

Fig. 10

1

3

5

2

4

6

Fig. 9

NOTE: The next step involves careful

handling of the glass panels that were

just temporarily fixed together to

determine a custom fit measurement

unique to your installation. It is

essential that two installers be used

along with responsive communication.

©2017 DreamLine. All Rights Reserved

Page 44: UNIDOOR X (STYLE M3) · UNIDOOR-X Style M GLASS-TO-GLASS HINGE SHOWER DOOR INSTALLATION IMPORTANT DreamLine® reserves the right to alter, modify or redesign products at any time

UNIDOOR PLUS (STYLE I) manual Ver 1 Rev 6 10/2016 14

9. Carefully disassemble the panels for the

next steps.

See Fig. 11 for details.

10. Place the U-Channel 2 (bottom profile)

(29) for the Return panel glass (26) onto

the threshold base in line with the inside

threshold mark.

Mark the drill holes on the threshold

through the predrilled holes in the U-

Channel 2 and drill the holes using Ø1/8”

drill bit.

Apply waterproof silicone along the bottom

surface and around the holes of the U-

Channel 2 and fasten it to the base with

the Countersunk screws ST4.2×40 (23).

NOTE: The surface needs to be clean and

free of debris before applying silicone.

See Fig. 12 & 13 for details.

Ø1/8”

1

3

5

2

4

inside

outside

Painters tape

U-channel 1

Anti-Water strip

90° Corner

Bracket

Return glass

Stationary

glass

U-channel 2

U-channel 2

Fig. 11

Fig. 12

waterproof

silicone

©2017 DreamLine. All Rights Reserved

Page 45: UNIDOOR X (STYLE M3) · UNIDOOR-X Style M GLASS-TO-GLASS HINGE SHOWER DOOR INSTALLATION IMPORTANT DreamLine® reserves the right to alter, modify or redesign products at any time

UNIDOOR PLUS (STYLE I) manual Ver 1 Rev 6 10/2016 15

11. Straight cut the U-channel 1 (76”, wall

profile) (09) at the top mark that was

made in step #8.

Place the U-Channel 1 (wall profile) on

the U-Channel 2 (bottom profile) (29)

and align vertically with the inside wall

mark.

Mark the drill holes on the wall through the

predrilled holes in the U-Channel 1.

Now drill holes in the wall using Ø5/16

drill bit and insert the Ø5/16” Wall

anchors (13).

See Fig. 14 for details.

Fig. 13

Fig. 14

Ø5/16”

1

3

5

2

4

U-Channel 1

U-Channel 2

inside

outside

©2017 DreamLine. All Rights Reserved

Page 46: UNIDOOR X (STYLE M3) · UNIDOOR-X Style M GLASS-TO-GLASS HINGE SHOWER DOOR INSTALLATION IMPORTANT DreamLine® reserves the right to alter, modify or redesign products at any time

UNIDOOR PLUS (STYLE I) manual Ver 1 Rev 6 10/2016 16

12. Apply waterproof silicone along the bottom

surface and around the holes of the U-

Channel 1 (76”, wall profile) (09).

Fasten the U-Channel 1 to the wall with

the Countersunk screw ST4.2x40 (23).

Insert the provided 2” pieces of the

Adjustment Spacers (28) into U-Channel

2 (bottom profile) (29) for minor

adjustments if necessary.

Apply Waterproof silicone into the groove

of both U-Channels.

See Fig. 15 & 16 for details

waterproof

silicone

Fig. 15

1

3

2

4

Fig. 16

©2017 DreamLine. All Rights Reserved

Page 47: UNIDOOR X (STYLE M3) · UNIDOOR-X Style M GLASS-TO-GLASS HINGE SHOWER DOOR INSTALLATION IMPORTANT DreamLine® reserves the right to alter, modify or redesign products at any time

UNIDOOR PLUS (STYLE I) manual Ver 1 Rev 6 10/2016 17

13. Slide the Return panel glass (26) into the

groove of both U-Channels.

NOTE:

If you have difficulty sliding the Return

panel glass into the U-Channels, you can

slightly tap on the Return panel glass with

a rubber mallet and a piece of wood.

See fig. 17 & 18 for details.

Fig. 17

1

3

2

Fig. 18

Use Adjustment spacers (#28)

as necessary to level your glass

©2017 DreamLine. All Rights Reserved

Page 48: UNIDOOR X (STYLE M3) · UNIDOOR-X Style M GLASS-TO-GLASS HINGE SHOWER DOOR INSTALLATION IMPORTANT DreamLine® reserves the right to alter, modify or redesign products at any time

UNIDOOR PLUS (STYLE I) manual Ver 1 Rev 6 10/2016 18

14. Place the U-Channel 2 (bottom profile)

(29) for the Stationary glass (11) onto the

threshold base in line with the inside

threshold mark and flush with 45° corner

cut.

Mark the drill holes on the threshold

through the predrilled holes in the

U-Channel 2 and drill the holes using

Ø1/8” drill bit.

Apply waterproof silicone along the bottom

surface and around the holes of the

U- Channel 2 and fasten it to the base with

the Countersunk screws ST4.2×40 (23).

NOTE: The surface needs to be clean and

free of debris before applying silicone.

See Fig. 19 & 20 for details.

Fig. 20

Fig. 19

Ø1/8”

1

3

5

2

4

inside

outside

waterproof

silicone

©2017 DreamLine. All Rights Reserved

Page 49: UNIDOOR X (STYLE M3) · UNIDOOR-X Style M GLASS-TO-GLASS HINGE SHOWER DOOR INSTALLATION IMPORTANT DreamLine® reserves the right to alter, modify or redesign products at any time

UNIDOOR PLUS (STYLE I) manual Ver 1 Rev 6 10/2016 19

outside

inside

waterproof

silicone

15. Apply Waterproof silicone into the groove

of the U-Channel 2 (bottom profile) (29)

and sparingly along the vertical edge of the

Return panel glass (26).

See Fig. 21 & 22 for details.

Fig. 21

Fig. 22

©2017 DreamLine. All Rights Reserved

Page 50: UNIDOOR X (STYLE M3) · UNIDOOR-X Style M GLASS-TO-GLASS HINGE SHOWER DOOR INSTALLATION IMPORTANT DreamLine® reserves the right to alter, modify or redesign products at any time

UNIDOOR PLUS (STYLE I) manual Ver 1 Rev 6 10/2016 20

16. Slide the Stationary glass (11) into the

groove of the U-Channel. Make sure the

vertical edge of the Stationary glass is

flush with outer face of the Return panel

glass (26) at the corner.

Apply a bead of silicone on the open end

of the U-Channel, and its connection.

NOTE:

If you have difficulty sliding the Stationary

glass into the U-Channel, you can slightly

tap on the Stationary glass with a rubber

mallet and a piece of wood.

See fig. 23 & 24 for details.

Fig. 23

1

3

2

4

Fig. 24

©2017 DreamLine. All Rights Reserved

Page 51: UNIDOOR X (STYLE M3) · UNIDOOR-X Style M GLASS-TO-GLASS HINGE SHOWER DOOR INSTALLATION IMPORTANT DreamLine® reserves the right to alter, modify or redesign products at any time

UNIDOOR PLUS (STYLE I) manual Ver 1 Rev 6 10/2016 21

inside

17. Attach the 90° Corner Bracket (30) to the

top corner of both glass panels. Ensure

that the 90° Corner Bracket is square and

gaskets are aligned properly before

tightening the glass holding screws.

Temporarily secure the corner of the glass

panels with several generous strips of

Painters tape to keep the corner tight until

the silicone cures.

See fig. 25 & 26 for details.

Fig. 25

Fig. 26

©2017 DreamLine. All Rights Reserved

Page 52: UNIDOOR X (STYLE M3) · UNIDOOR-X Style M GLASS-TO-GLASS HINGE SHOWER DOOR INSTALLATION IMPORTANT DreamLine® reserves the right to alter, modify or redesign products at any time

UNIDOOR PLUS (STYLE I) manual Ver 1 Rev 6 10/2016 22

18. Apply waterproof silicone along the connection of all

U-Channels to the wall and threshold on the inside of

shower. Carefully apply an even bead of silicone down

the inside corner of the glass panels.

See Fig. 27 & 28 for details.

Fig. 27

waterproof

silicone

inside

inside

Fig. 28

waterproof

silicone

©2017 DreamLine. All Rights Reserved

Page 53: UNIDOOR X (STYLE M3) · UNIDOOR-X Style M GLASS-TO-GLASS HINGE SHOWER DOOR INSTALLATION IMPORTANT DreamLine® reserves the right to alter, modify or redesign products at any time

UNIDOOR PLUS (STYLE I) manual Ver 1 Rev 6 10/2016 23

19. Notch the Anti-Water strip (inline panel)

(19) 1” at the base to fit around bottom

U-channel. Press the Anti-Water strip

onto the vertical edge of the Stationary

glass (11).

See Fig. 29 for details.

outside

inside

outside

inside

outside

inside

Fig. 29

1

3

2

4

©2017 DreamLine. All Rights Reserved

Page 54: UNIDOOR X (STYLE M3) · UNIDOOR-X Style M GLASS-TO-GLASS HINGE SHOWER DOOR INSTALLATION IMPORTANT DreamLine® reserves the right to alter, modify or redesign products at any time

UNIDOOR PLUS (STYLE I) manual Ver 1 Rev 6 10/2016 24

Product Maintenance

BASES and BACKWALLS: To ensure long lasting life for your acrylic back walls: wipe them off

after each use with a soft cloth. To clean the acrylic back walls use non-abrasive sprays or cream

based cleaners. Avoid the use of aerosol spray cleaners. Never use abrasive cleansers, metal

brushes or scrapers that could scratch or dull the surface.

GLASS: To ensure long lasting life for your glass shower products: wipe them off after each use

with a soft cloth. Rinse and wipe off the glass using either a soft cloth or a squeegee to prevent

soap buildup and water spots (Hard water can etch the surface of the glass over time if left to dry).

To prevent scratching the surface: never use abrasive cleaners or cleaning products that contain

scouring agents. Never use bristle brushes or abrasive sponges that may scratch the surface.

HARDWARE: To ensure a long lasting finish: wipe off the metal parts after each use with a soft

cloth. Do not use abrasive cleaners or cleaning products containing ammonia, bleach or acid. If

accidentally used, rinse the surface as soon as possible to prevent damage to the finish (peeling or

corrosion). After cleaning the polished finishes, rinse thoroughly and wipe dry with soft cloth.

Clean stainless steel surfaces at least once a week. When applying stainless steel cleaner or polish

to stainless steel hardware, work with (not across) the grain. Never use an abrasive sponge or cloth,

steel wool or wired brush as these may permanently scratch the surfaces.

NOTE: To maximize the life of your door, it is important to regularly inspect the glass and

other hardware for misalignment, proper attachment, and/or damage. Contact DreamLine

with any questions or concerns.

©2017 DreamLine. All Rights Reserved

Page 55: UNIDOOR X (STYLE M3) · UNIDOOR-X Style M GLASS-TO-GLASS HINGE SHOWER DOOR INSTALLATION IMPORTANT DreamLine® reserves the right to alter, modify or redesign products at any time

UNIDOOR PLUS (STYLE I) manual Ver 1 Rev 6 10/2016

TEL: 866-731-2244

FAX: 866-857-3638

DREAMLINE.COM

For more information on DreamLine® Shower Doors and Enclosures please visit DreamLine.com

©2017 DreamLine. All Rights Reserved