UNIMOGA C C E S S O R I E S

hellgeth.com

With more than 1000 customers worldwide Hellgeth engineering is the NO. 1 for all kind of modifications according the famous UNIMOG chassis. No matter if you just need a set of customs coil springs for your expedition camper, a high powered engine for your Dakar-Rally UNIMOG, or a complete brand new UNIMOG with professional winch system and extra deep fording kit for powerline set up in remote areas. With more then twenty years experience, in-house engineering and in house CNC machining, we pushed the limits of feasability by far.

We do stock a wide range on UNIMOG parts and components. Our parts are either original or parts designed and manufactured in house or designed in house and made by high quality suppliers. Focus of our UNIMOG stock is nevertheless upgrade parts and components. Winches, split gearboxes, special axle gear ratios, tire inflation system, aluminium rims, special tires, racing shocks are just a few of hundreds of solutions.

Additionally to our UNIMOG programm we offer other wheeled special vehicles for off-road and commercial use as well as customizing these.

extraordinary

for UNIMOG 1300L, 1550L and U4000Art.-No. HE 00888

for UNIMOG 1700L to 2450L and U5000also for U400 und U500Art.-No. HE 00889

UNIMOGA C C E S S O R I E S

These KONI shock absorbers have been especially developed by KONI and Hellgeth engineering. They are designed to deliver optimum road holding and comfort both on road and offroad. Tested under extreme conditions, these dampers for UNIMOG vehicles matches the highest offroad demands regarding safety und stability.

KONI shock absorbers are simply adjustable referred to the rebound rates. This means that the damping characteristic can be adapted to axles load and the circumstances. Furthermore, the shock absorbers have large reserves of damping power available.

Hellgeth engineering Spezialfahrzeugbau GmbH

Gewerbegebiet 16D-07343 Wurzbach-RodacherbrunnGermany

T: +49 36652 35510info@hellgeth.de

SATISFY THE HIGHEST OFFROAD DEMANDS

UNIMOG SHOCK ABSORBERS

Hellgeth Competition shocks are build from massive Aluminum, with a 22 mm piston rod. The external black anodized aluminum reservoir with High speed and Low Speed Compression valve is easy to fit according the “Stahlflex” hose with adjustable rotating fittings.

Hellgeth Competition shock is fully adjus-table in compression and rebound forces. These shock absorbers can withstand the most extreme conditions in long distance rally raid sport.

Together with our coil springs we can offer the ideal racing suspension systems for your UNIMOG, The External Water Cooling System is an option and minimizes the fluid temperatures inside the shocks to ensure outstanding performance on the long run, even when covered with mud or dirt.

for UNIMOG models 435, 437Art.-No. HE 00890

COMPETITION SHOCKS

n especially calculated and manufactured for UNIMOG 1300L vehicles, with an empty weight of 6500kg and e.g. high payload on the rear axlen special spring rates for a stiff set up, against rolling while cornering n powder coated in individual colorsn coil springs made by Hellgeth engineering

n individually calculated and manufacturedn exactly matching your vehicle weight and weight distributionn individual spring rates from soft “crawling” set up to stiff “high speed” set upn individual length and sag for either wheel travel extension or reduced rolling while corneringn high quality 50CrV4 EN 10089 steel, crack-inspected, shot-peened, powder coatedn individual colors available

UNIMOG 1300L COIL SPRINGS

CUSTOM MADE COIL SPRINGS

Custom made coil springs for all types Art.-No. HE 07002

for UNIMOG 1300L model 435Art.-No. HE 07001

HUTCHINSON 2-PIECE ALUMINIUM RIM FOR UNIMOG

n saving unsprung weightn extremely durable forged or cast designn precisely machined, no unbalanced massn 2-piece bolt togheter designn may be assembled and disassembled easily without heavy toolsn may remain on the hub for changing a tiren designed for the use with a Beadlock ringn enables lowest tires pressures without a risk of separation from the rimn enhances traction on soft ground by farn combined with CTIS a Beadlock is compulsaryn various offsets, rim sizes and Beadlock rings availablen succesfully tested under toughest rally conditionsn exclusive by Hellgeth engineeringn see facts on www.hutchinson-truckwheels.com

6 bolt rim 20x11 inch, for UNIMOG 406, 416, 427, 435, 437, U400Tire size 365/80R20, 405/70R20Art.-No. HE 07203

10 bolt rim 10x20 inch, for UNIMOG 437, U5000, U400, U500Tire size 365/85R20, 395/85R20Art.-No. HE 07206

CHIP TUNING

SAVE FUEL AND POWER UP YOUR UNIMOG

Give your UNIMOG more power and save fuel at the same momentOptimized performance for your UNIMOG engine type 9xx, so OM 904 or OM924, OM906

Our proven chip tuning has been developed by our engineers to increase engine power without compromising vehicle components. The new set up on the engine control unit provides with the UNIMOG´s turbo diesel engines a power increase of up to 15% and more, as well the torque curve is optimized, too.

You‘ll immediately notice better acceleration from low end in the rev range and when using taller gears.

Your engines response will be better – you‘re driving experience transformed. At the same time, you may save fuel using more often low end revs.

for UNIMOG Models U300, U400, U500, U4000, U5000Art.-No. HE 07040

MORE RANGE:DISCOVER THE WORLD

A bigger fuel reservoir in the UNIMOG vehicle is obligatory when you travel far from any civilization. It expands your max. reach and enables to refuel at the ideal moment to save costs.

The additional 270 liter fuel tank has been designed with great attention to detail and is available for wheelbase 3250 mm and longer. The tanks are made for maximum ground clearance and do not impede the off-ro-ad-capabilities of the vehicle. Manufactured from stainless steel, it contains an inter-nal system from meshed aluminium to reduce sloshing of the fuel to a minimum.

ADDITIONAL TANK

for UNIMOG models 435, 437 Art.-No. HE 07060

for UNIMOG models 427, 435, 437 Art.-No. HE 07020

High power LED modulesThe LED modules provide excellent lighting performance for your UNIMOG.

6 high-power LEDs for dipped beam and main beam functions on each side of the vehicle plus a main beam module extra, for optimized homogeneous illumination of the road.

The LED light kit is designed for your UNIMOG to be installed easily. There is no need for a headlight power wash system LED modules require no maintenance up to 15,000 operating hours and they are absolutely waterproof

LIGHT UP YOUR ROUTE

Bull Bars are the most effective way to protect your vehicle front end from brush and small trees.

UNIMOG Bull Bars give your vehicle the real and tough expedition look. The design does still accept a front winch installation and provides easy access for maintenance reasons to the engine compartment by the fold down device.

We offer Bull Bars powder coated black or Stainless Steel. They are prepared to mount two pairs of additional front lights.

FRONT BULLBAR

for UNIMOG models 435, 437

powder coated black steel Art.-No. HE 07050

Stainless SteelArt.-No. HE 07051 PROTECT YOUR UNIMOG

EXTRAVAGANT ACCENTS

Driving through rough terrain does not have to require giving up on luxury.

No matter if you just install high-quality sports seats with leather upholstery or even more extravagant accents that reflect the technical performance of the UNIMOG.

The exquisite overall impression may be enhanced by a leather sport steering wheel and aluminum pedal system. The customization of the passenger cabin can be characterized by exclusive and high-quality details unfolds, such as the door panels made from carbon fiber.

ACCENTS

ACCENTUATION

CUSTOMIZE YOUR UNIMOG

Further more, we do produce and offer accessories and components for your individual needs and ideas to convert the UNIMOG into the perfect partner while travelling off-road, or when used commercially.

Split gearboxes Cab protection bar

Winches Roll over Protection

Off road tires Roof rack

Skid Plates Inox steel exhaust

Central tire Components for inflation system off road competitions

CUSTOMIZATION

INDIVIDUALIZATION

BEYOND THE EXTRAORDINARY

Hellgeth engineering Spezialfahrzeugbau GmbHGewerbegebiet 16 | D-07343 Wurzbach-Rodacherbrunn | GermanyT: +49 36652 35510 | info@hellgeth.de | www.hellgeth.com

Your Distributor