unique catalogue

Upload: deepakpatni11

Post on 30-Oct-2015

22 views

Category:

Documents


0 download

DESCRIPTION

fdddddddddddddddd

TRANSCRIPT

  • Ups UNIQUE

    A SOURCE OF COMPLETE PACKAGING SYSTEMS

    M A N U F A C T U R E & E X P O R T E R

    I EUN QU

    UN QUEI

    UNI UEQ

    N EU IQU

  • AUTOMATIC FORM-FILL & SEAL MACHINE

    AUTOMATIC LIQUID-FILL & SEAL MACHINE

    TECHNICAL SPECIFICATIONS

    SEALING TYPES 3 Side Seal, 4 Side Seal & Center Sealing

    PACKAGING SIZE (Length) 40 - 200 mm.

    (Film Width) 60 - 350 mm.

    PACKING SPEED 40 - 90 Pouches / Per Minutes.

    (Depending upon the Size)

    PACKAGING RANGE 05 gms, to 100 gms.

    PACKING MATERIAL Any heat sealable Laminated Films.

    MOTOR 1/2HP., 220V AC, Single Phase.

    HEATER LOAD 2 Kw. Maximum.

    MACHINE DIMENSIONS L 750 x W 550 x H 1800 (mm)

    NET Wt. OF MACHINE 450 Kgs (Approx.)

    SEALING TYPES 3 Side Seal, 4 Side Seal & Center Seal

    PACKAGING SIZE (Length) 40 - 200 mm.

    (Film Width) 60 - 350 mm.

    PACKING SPEED 40 - 90 Pouches / Per Minutes.

    (Depending upon the Size)

    PACKAGING RANGE 05 ml. to 250 ml.

    PACKING MATERIAL Any heat sealable Laminated Films.

    MOTOR 1/2HP., 220V AC, Single Phase.

    HEATER LOAD 2 Kw. Maximum.

    MACHINE DIMENSIONS L 750 x W 550 x H 1800 (mm)

    NET Wt. OF MACHINE 450 Kgs. (Approx.)

    TECHNICAL SPECIFICATIONS

    APPLICATIONS:-

    Highly Suitable for :- Packing Various Powders, Granules, Tea, Coffee,

    Dhana Dal, Tablets, (Pharmaceuticals) Mehandi, Namkeen, etc.

    APPLICATIONS:-

    Highly Suitable for :- Liquids, Paste, Tomato Ketchup, Wine, Shampoo,

    Jam, Soya milk and Mineral Water etc.

    TECHNICAL SPECIFICATIONS

    AUGAR FILLING MACHINE WITH WEIGHING

    APPLICATIONS:-

    Highly Suitable for :- Wheat flour, Turmeric Powder, Chilli Powder,

    Pesticides Powder, Mehandi Powder, Glucose Powder or any type of

    fine Powder etc.

    OPERATION Mechanical / Pneumatic.

    CONTROL Electronically or PLC controlled.

    OUTPUT 15-60 Fills/min & 5-8 Fills/min with weighing

    (Subject to model & gramage)

    PACKAGING RANGE 1gm to 10 Kg.

    PACKAGING MATERIAL Any ready pouches, jar, containers etc.

    POWER REQUIREMENT 420V AC 3Phase, 50 Hz (Subject models)

    MODEL UA-010

    MODEL UA-020

    MODEL UA-030 A

    U IQNUE

    U IQUEN

    Screw conveyor as per specific requirements.

    N Q EU I U

  • AUTOMATIC FORM-FILL & SEAL MACHINE

    AUTOMATIC COLLER TYPE AUGAR FILLER WITH

    SERVO BASED HIGH SPEED MACHINE

    AUTOMATIC COLLAR TYPE CUP FILLER MACHINE WITH PLC

    TECHNICAL SPECIFICATIONS

    SEALING TYPES 3 Side Seal, 4 Side Seal & Center Sealing

    PACKAGING SIZE (Length) 40 to 300 mm.

    (Film Width) 60 to 400 mm.

    PACKING SPEED 15 to 60 Pouches / Minutes.

    (Depending upon the Size)

    PACKAGING RANGE 5 - 20, 20 - 50, 50 -100, 100 - 250, 250 - 500 gms.

    PACKING MATERIAL Any heat sealable Laminated Films.

    MOTOR 1/2HP., 220V AC, 50Hz., Single Phase.

    HEATER LOAD 4 Side Seal, 3 Side & Center Seal

    (150x2 Nos., 450x2 Nos.)

    DIMENSIONS / Wt. L :800, W :610, H :1940 (mm) / 400 Kgs.

    SEALING SYSTEMS Center Seal with constant heat.

    CENTER FIN SEAL 10mm. to 12mm.

    PACKAGING SIZE (Length) 100 to 300 mm.

    (Film Width) 220 to 500 mm.

    PACKING SPEED 15 to 90 Pouches / Minutes Approx.

    PACKAGING RANGE 10gms. to 1Kg, 1Kg to 2Kg, 5Kg to 10Kg.

    PACKING MATERIAL Any heat sealable Laminated Films.

    TYPES OF FILLER Cup Filler, Auger Filler, or Weigh Filler.

    POWER Consumption 4 KVA, AC, Three Phase / Single Phase

    MACHINE DIMENSIONS L 2100 x W 700 x H 1690 (mm)

    NET Wt. OF MACHINE 600 Kgs (Approx.)

    TECHNICAL SPECIFICATIONS

    SEALING SYSTEMS Central Seal with constant heat.

    CENTRAL FIN SEAL 10mm. to 12mm.

    PACKAGING SIZE (Length) 100 to 300 mm.

    (Film Width) 220 to 500 mm.

    PACKING SPEED 15 to 50 Pouches / Minutes Approx.

    PACKAGING RANGE 100 gms, to 5Kg.

    PACKING MATERIAL Any heat sealable Laminated Films.

    TYPES OF FILLER Cup Filler, Auger Filler, or Weigh Filler.

    POWER Consumption 3 KVA, AC, Single Phase /Three Phase.

    MACHINE DIMENSIONS L 2100 x W 1000 x H 2200 (mm)

    NET Wt. OF MACHINE 500 Kgs (Approx.)

    TECHNICAL SPECIFICATIONS

    APPLICATIONS:-

    Highly Suitable for :- Turmeric Powder, Spices, Chillies Powder, Mehandi

    Powder, Glucose Powder, Ors Powder, Baby Foods, etc.

    APPLICATIONS:-

    Highly Suitable for :- Spices Powder, Mehandi Powder, Atta, Besan, Maida

    Detergent Powder, Pesticides Powder, and other similar Products.

    APPLICATIONS:-

    Highly Suitable for :- Rice, Pulses, Bio-fertilizer, Namkeen, Tea, Detergent

    Powder, Salt, Suger and other similar Products.

    MODEL UA-040

    MODEL UA-050A

    MODEL UA-050BPLCBA

    S DE

    Sv

    ero

    LPCS

    BAED

    IUNQUE

    UNIQUE

    UNIQUE

    UN QUEI

    HIGH SPEED

  • TECHNICAL SPECIFICATIONS

    SEALING TYPES 3 Side Seal, 4 Side Seal & Center Sealing

    PACKING SPEED 15 to 60 Pouches / Minutes.

    (Depending upon the Size)

    PACKAGING RANGE (A) 10 to 500 gms. In single Machine.

    (B) 10 - 250 gms., 100 - 500 gms In single Mc.

    PACKING MATERIAL Any heat sealable Laminated Films.

    POWER CONSUMPTION 3 Kw three phase / single phase.

    DIMENSIONS / Wt. (Approx.) L :1000, W :1000, H :2300 (mm) / 600 Kgs.

    TECHNICAL SPECIFICATIONS

    SEALING TYPES Pillow type continues.

    WRAPPING SIZE LENGTH : 100 to 350 mm,

    WIDTH : 90 to 450 mm,

    HEIGHT : 10 to 100 mm.

    PACKING SPEED 40 to 200 Packets /Minutes.

    (Depending upon the size)

    PACKING MATERIAL Any heat sealable Laminated Films.

    MOTOR 1HP., 220V AC, 50Hz., Single Phase.

    POWER Consumption 2.5 kw, DC. (with DC Drive) Single Phase.

    MACHINE DIMENSIONS L 3600 x W 1500 x H 1800 (mm)

    NET Wt. OF MACHINE 450 Kgs (Approx.)

    TECHNICAL SPECIFICATIONS

    APPLICATIONS:-

    Highly Suitable for :- Various Powders, Granules, Tea, Coffee, Dhana Dal,

    Tablets, Dhana Dal, Namkeen, Etc.

    APPLICATIONS:-

    Highly Suitable for :- Packing of Biscuits, Chocolates, Soaps, Stationary

    Items, Syringes, Ball Bearings, Auto Parts, Toys and other solid products.

    MODEL UA-051A / UA-051B

    MODEL UA-060

    MODEL UA-070AUTOMATIC HORIZONTAL FLOW WRAP MACHINE

    SEMI AUTOMATIC FILLING MACHINE

    AUTOMATIC FFS MACHINE PNEUMATIC TYPE

    PACKING SPEED 5 to 25 Pouches / Minutes.

    (Depending upon the quantity)

    PACKAGING RANGE 500 gms. to 5 Kgs.

    MOTOR 1/2HP., 220V AC, 50Hz., Single Phase.

    DIMENSIONS / Wt. L :700, W :800, H :2100 (mm) / 300 Kgs.

    UNIQUE

    N QU

    U IE

    APPLICATIONS:-

    UA-051A Highly Suitable for :- Spices Powder, Mehandi Powder,

    Glucose Powder, Ors Powder etc.

    UA-051B Highly Suitable for :- Kurkure, Namkeen, Snecks, Tea

    Powder, Spices etc.

    UN UEIQ

    IUN QUE

    UA-051A UA-051B

  • TECHNICAL SPECIFICATIONS

    TECHNICAL SPECIFICATIONS

    (Depending upon the Size)

    gms. to 10 s.

    Any heat sealable Laminated Films.

    Dimensions L-1200, W-1000, H-2550 (mm)

    Control PLC Controlled

    Mode of Operation Pneumatic

    Filling Capacity (Range) 5 Kg

    Packaging Material

    Power Requirement 220V Single Phase OR 420V Three Phase

    Compressed Air Req. 8 CFM with 6 bar pressure

    Variety of Models 5 - 50g, 10 -100g, 20 - 250g, 50 - 500g,

    200 - 1000g, 1 - 5 kg, 2 - 10 kg.

    Filling Speed 1000 to 4000 pouches/hr

    APPLICATIONS:-

    Highly Suitable for :- Kurkure & Potato Chips, Chlwda, Namkeen,

    Dry-Fruits, Pulses, Grains, Tea, Sugar, Seeds etc.

    MODEL UA-090AUTOMATIC COLLAR TYPE WEIGH FILLER MACHINE

    APPLICATIONS:-

    Highly suitable for :- Pulses, Wafers, Dry Fruits, Tea Powder, Candies,

    Namkeen, Whole spices, Seeds and Detergent Powder etc.

    Linear weigh filling system is a loadcell based filling technology to pack the material with

    weighing. Linear vibratory feeders are used to feed the material from the storage

    hopper to the weighing pan. The electronic control panel consists of a sophisticated

    electronic hardware and software control the rate of vibration and continuously

    measures the weight that falls inside the weighing pan. Intially in the coarse mode the

    vibration/feed rate is high and the material flows into the weighing pan at a high speed.

    Once the material in the weighing pan reaches nearly 80% to 90% of the target weight

    the machine automatically enters in the fine mode where the material trickles down and

    the vibration finally stops as soon as the target weight is achieved. The weighted material

    is then dropped automatically or by pressing a foot switch in the final packet/carton. This

    system is called A single head weighing machine and by this single head machine 6 to 10

    fills can be taken per minute. For more speed the number of weighing head can be

    increased.

    FEATURES:-

    Single machine can be used for different products

    and different weights, highly suitable for products

    with variable density, products which have tendency

    of breakage can be easily packed, products with

    irregular shape and sizes can be easily packed

    Number of Heads Single Head / Double Head / Multi Head

    Feeding Method Linear Vibratory Feeder

    Weighing Range 1gms to 1kg, 5kg to 10kg, 10kg to 50kg

    Speed (fills / Min) 8-14 depending upon the material

    Weighing Accuracy 0.1% to 2% depending upon the material

    Power Supply 230V. AC. Single phase 300VA per Head

    LINEAR WEIGH FILLER MACHINE

    MODEL UA-080

    TECHNICAL SPECIFICATIONS

    APPLICATIONS:-

    Highly Suitable for :- industries of food, pharmacy, seed and

    chemical & light industries for the sealing any heat sealable pouches,

    bags and sachets made by film and various composite films

    MODEL UA-033MULTI FUNCTIONAL PLASTIC FILM SEALING MACHINES

    MODEL UA-033 (900W.)

    POWER SUPPLY 500 W. 110V. / 220V. AC.

    SEALING SPEED 0 to12 Metre / Minute.

    SEALING THICKNESS 6 to12mm.

    FILM THICKNESS 0.02mm to 0.80mm.

    TEMPERATURE SCOPE 0-300C

    DIMENSION / Wt. L : 880, W : 350, H : 320 (mm.) / 22kgs.

    UNIQ EU

  • TECHNICAL SPECIFICATIONS

    APPLICATIONS:-

    Highly Suitable for :- Canned food, cosmetic, bottles commodity,

    plastic bottle, liquid bottle and beverage, etc

    MODEL UA-044AUTOMATIC SHRINK PACKING MACHINES

    MODEL UA-044A UA-044B

    VOLTAGE 220V/380V. 50/60Hz. 220V/380V. 50/60Hz.

    POWER 6.5kw. 8kw.

    CONVEYOR BEARING 10 KG. 30KG.

    SPEED 0-13m/min. 0-13m/min.

    TUNNEL SIZE(mm.) L900, W450, H(50-250). L1200, W450, H(50-350).

    DIMENSION L1200, W650, H1240. L1200, W650,H1340.

    NET WEIGHT 120kgs. 150kgs.

    UN QUEI

    TECHNICAL SPECIFICATIONS

    Number of Heads Single Head.

    Feeding method Elevator feeder.

    4 to 16 fills/ min.

    (Depending upon the Size)

    2kgs. to 25kgs.

    2Kw.

    Weight of machine. 1800Kgs. Approx.

    Filling Speed

    Filling Capacity (Range)

    Power Requirement 220V AC Single Phase.

    TECHNICAL SPECIFICATIONS

    APPLICATIONS:-

    Highly Suitable for :- packaging of Granule, Nuts, Bean, Rice, Tea etc.

    APPLICATIONS:-

    Highly Suitable for :- Kurkure & Potato Chips, Farsan,Chiwda, Namkeen, Dry -

    Fruits, Pulses, Grains, Tea, Sugar, Seeds, Frozen cut vegetable etc.

    MODEL UA-092

    MODEL UA-091MULTI HEAD COMBINATION WEIGHER

    High Speed & High Precision weighing is the uniqueness of multihead

    weigh filler. UNIQUE series is well known for its pouch finish & sealing

    intactness which prevents leakage of inert gas from pouches & gives

    extended product shelf life.

    (Depending upon the Size)

    Any heat sealable Laminated Films.

    DIMENSIONS / Wt. Approx. W-1800, B-1800, H-3350 (mm) /1400 Kgs.

    Control PLC Controlled.

    Mode of Operation Pneumatic.

    Filling Capacity (Range) 10 g to 1kg

    Packaging Material

    Power Requirement 420V. AC Three Phase, 50Hz.

    Compressed Air Req. 8 CFM with 6 bar pressure

    Reel Core Diameter 70mm to 76mm. Max. Weight 50 kg.

    200g - 1000g, 1 kg - 5 kg, 2 kg - 10 kg.

    Filling Speed 1000 to 4000 pouches/hr

    Feature

    This machine consists of elevator, automatic weighing machine, equipped with

    pneumatic bag-clamping device. Suitable for packaging of disperse products. The

    elevator elevates the product to the feed hopper of weighing machine for automatic

    weighing, transport and sealing. Its use and maintenance are both very convenient.

    SEMI AUTOMATIC WEIGH FEEDER

    N QU I UE

    UNIQUE

  • APPLICATIONS:-

    Highly Suitable for :- Mixing wet & dry powders.

    MODEL UA-055POWDER MASS MIXER

    All contact parts of S. Steel and M. Steel. Gear box hobing gear

    with mechanical fitting arrangement.

    TECHNICAL SPECIFICATIONS

    TECHNICAL SPECIFICATIONS

    APPLICATIONS:-

    Highly Suitable for :- Liquid, Oil, Cream, Juice and like items.

    APPLICATIONS:-

    Highly Suitable for :- Drying all type of products.

    APPLICATIONS:-

    Highly Suitable for :- To convey powders from one station to another

    station like, from one pulveriser to another, or from pulviser to mixing

    unit or to pouch packing machines etc.

    MODEL UA-066

    MODEL UA-077

    MODEL UA-088SCREW CONVEYOR

    With uniform circulation of hot air in the drying chamber, complete with motor.

    HOT AIR TRAY DRYER

    FILL CAPACITY 2ml. To 1 ltr. (By suitable syringe)

    MOTOR 0.5 HP /1 HP, 220V AC, Single Phase

    OUTPUT 600 to 1200 Bottle per hour.

    NET WEIGHT Approx 100 Kg.

    CAPACITY 2Kgs./min. To 200Kgs./min.

    POWER Req. 220V AC, 50Hz. Single Phase.

    ( up to 75Kgs. capacity )

    420V AC, 50Hz. Three Phase.

    ( optional variable frequency )

    SEMI AUTOMATIC LIQUID FILLING MACHINE

    TECHNICAL SPECIFICATIONS

    Capacity Tray 6 12 24 48 96 192

    Width 54* 54* 54* 78* 134* 134*

    Depth 21* 21* 37* 40* 40* 76*

    Hight 23* 42* 42* 74* 74* 74*

    Heater load 3kw. 5kw. 5kw. 7.5kw. 15kw. 30kw.

    Fan Motors HP HP HP 1 HP 2 HP 4 HP

    Standard Tray Size ss 32 x 16 x 1

    UNIQUE

    UNIQUE

    EUNIQU

    UN Q EI U

  • NOTE: We reserve the right to change design and modify specifications without notice

    UNIQUE PACKAGING SYSTEMSPlot No. 24B/5 Industrial Area, N.I.T. FARIDABAD -121001 (Haryana) INDIA

    Phones : 91-129-4057522, 2441919, (M) 09810234311, 09818844311

    Tele Fax: 0129-2441919 E-mail: [email protected]

    [email protected], Website: www.uniquepackagings.com

    www.uniquepackmachines.com

    niag gck a SPe ystuq emin sU

    niag gck a SPe ystuq emin sU

    Ups

    WE DESIGN, DEVELOP PACKAGING MACHINE TO YOUR NEEDS

    WE BELIVE IN HONESTY, QUALITY & COMMITMENT

    MANUFACTURE & EXPORTER

    Page 1Page 2Page 3Page 4Page 5Page 6Page 7Page 8