unirig lifting mooring[1]

Lifting and Mooring Equipment

4 Steel Wire Rope - Constructions

1 Introduction

Co

nte

nts

5 Steel Wire Rope - Breaking Load Table

6 Mooring Wires and Superflex Cable

7 Steel Wire Rope - Working Load Tables

8 Spelter Sockets

9 Mooring Sockets

10 Tubular and Heavy Duty Thimbles

11 Link and Synthetic Rope Thimbles

12 Hawser Shackles and Thimbles

13 Green Pin Shackles

14 Shackles and Snatch Blocks

15 Snatch Blocks and Deck Equipment

16 Anchor Chains Link Dimensions

17 Anchor Chains - Breaking Load Tables

18 Ramfor Connectors

19 Anchor Chains and Fittings

20 Pearlinks and Hingelinks

21 Chafe Chains

22 Anchor Types

23 Stevpris Anchor Dimensions

24 Chain Chasers

25 Tug Fenders

26 Dynalines and Winches

27 Hire equipment

28 Electric Winches

29 Electric Winches

Fitting Snub Nose Spelter Sockets

Heavy Duty Chain Support Buoy

Semi Submersible Drilling Rig, offshore at Darwin, NT

page 1

Intr

od

uc

tio

n

page 2

Unloading a CALM Buoy, offshore at Dampier, WA

The installation ofpreset anchors

offshore Malaysia

1200 Tonne Tensile Test Bed located at Henderson, WA

3page 3

Ste

el

Wir

e R

op

e

page 4

WIRE

STRAND

CORD WIRE ROPE

RIGHT LAY - REGULAR LAY

LEFT LAY - REGULAR LAY

RIGHT LAY - LANG LAY

LEFT LAY - LANG LAY

RIGHT LAY - ALTERNATE LAY

LEFT LAY - ALTERNATE LAY

The design of a rope is determined by

Strand construction the number and arrangement of wires in each strand

Rope construction the number and arrangement of strands in each rope

The core

CONSTRUCTION OF STEEL WIRE ROPES

Grade 1770 N/mm2 Ungalvanised and drawn galavanised wire for wire rope of general purposes

Grade 1960 N/mm2 Extra high tensile grade is used in the manufacture of wire rope forspecial application where ultimate breaking strength is required

GRADES OF WIRE ROPE

WIRE ROPE LAYS

Right lay: Clockwise.Left lay: Counter-clockwise.Regular lay: Wires in strands are laid in the opposite

direction of the strands and are parallel to the rope axis.

Lang lay: Wires are laid in the same direction asthe strands of the rope and in an angleto the rope axis.Longer lengths of the individual wires are exposed, creating greater resistance to wear and improve flexibility.Lang lay ropes should only be usedwhere both rope ends are fixed andtherefore should not be used with aswivel type terminal.

SPELTERSOCKET

MECHANICALLYSPLICED THIMBLE

WEDGE SOCKET

WIRE ROPEGRIPS

HAND SPLICEDTHIMBLE EYE

SWAGED SOCKET

Ste

el

Wir

e R

op

e

page 5

BREAKING LOAD TABLE

6 x 19S(9 + 9 + 1)

6 x Fi (25) IWRC

6 x 36 IWRC

6 x SFi (41) IWRC

SOFT EYECode = SE

THIMBLE EYECode = TE

THIMBLE and HOOKCode = H

CRESCENTTHIMBLE Code = C

OPENSOCKET Code = OS

CLOSEDSOCKET Code = CS

6 Strand ropes with IWRC bright or galvanizedTensile grade: 1770 N/mm2 = 180 kgf/mm2

1960 N/mm2 = 200 kgf/mm2

Higher Grades Available on Request

8 25.5 40.3 4110 44.7 45609 32.2 51.0 5200 56.5 5760

10 39.8 63.0 6420 69.8 712011 48.2 76.2 7770 84.4 861012 57.3 90.7 9250 100.0 1020013 67.3 106.0 10800 118.0 1200014 78.0 124.0 12600 137.0 1400016 102.0 161.0 16400 179.0 1830018 129.0 204.0 20800 226.0 2300019 144.0 227.0 23100 252.0 2570020 159.0 252.0 25700 279.0 2850022 193.0 305.0 31100 338.0 3450024 229.0 363.0 37000 402.0 4100026 269.0 426.0 43400 472.0 4810028 312.0 494.0 50400 547.0 5580030 358.0 567.0 57800 628.0 6400032 408.0 645.0 65800 715.0 7290034 460.0 728.0 74200 807.0 8230036 516.0 817.0 83300 904.0 9220038 575.0 910.0 92800 1010.0 10300040 637.0 1010.0 103000 1120.0 11400042 702.0 1110.0 113000 1230.0 12500044 771.0 1220.0 124000 1350.0 13800045 806.0 1280.0 131000 1410.0 14400048 917.0 1450.0 148000 1610.0 16400052 1080.0 1700.0 173000 1890.0 19300058 1340.0 2121.0 216000 2350.0 24000064 1630.0 2580.0 263000 2860.0 29200067 1790.0 2830.0 289000 3130.0 31900070 1950.0 3090.0 315000 3420.0 34900077 2360.0 3740.0 381000 4140.0 42200080 2550.0 4030.0 41100086 2940.0 4660.0 47500090 3220.0 5100.0 52000096 3670.0 5810.0 592000

102 4140.0 6560.0 669000

mm kg/100m kN kgf kN kgf

Nominal Minimum breaking loaddiameter Weight 1770 1960

Ste

el

Wir

e R

op

e

page 6

HIGH STRENGTH MOORING WIRES

SUPERFLEX CABLE

6 Strand Wire Ropes

Ste

el

Wir

e R

op

e

7page 7

WIRE ROPE 1770 GRADE

FIBRE ROPE 1570 GRADE

6 116 12.7 38.1 20.6 9.65 57.2 12.7 46.0 0.238-10 125 15.7 42.9 23.9 12.7 57.2 17.5 52.3 0.34

11-13 140 17.5 50.8 28.7 14.2 63.5 22.4 58.7 0.6814-16 162 20.6 66.8 35.1 17.5 76.2 25.4 65.0 1.13

19 194 26.9 76.2 41.4 20.6 88.9 31.8 77.7 1.9322 226 33.3 92.2 47.8 24.6 102 38.1 90.4 3.2925 254 36.6 105 57.2 28.7 114 44.5 103 4.7629 283 39.6 114 63.5 31.8 127 50.8 116 6.46

32.35 313 42.9 127 69.9 38.1 140 57.2 130 8.9638 359 50.8 137 79.5 41.4 152 63.5 156 12.741 391 54.1 146 82.6 44.5 165 69.9 171 17.3

44-48 444 55.6 171 89.7 50.8 191 76.2 198 26.051-54 502 62.0 194 96.0 57.2 216 82.6 224 35.057.60 549 73.2 216 109 63.5 229 92.2 248 47.664-67 597 75.0 241 140 73.2 248 102 270 63.570-73 648 76.2 273 159 79.2 279 124 286 99.876-79 686 82.6 292 171 85.9 305 133 298 12583-86 743 102 311 184 91.9 330 146 311 14289-92 787 102 330 197 98.6 356 159 330 181

95-102 845 108 362 216 108 381 178 356 245

Wireropedia.mm

Weightkg

each

A B C D F J K L

Dimensions in mm

CLOSED SPELTER SOCKETS

OPEN SPELTER SOCKETS

6 116 17.5 19.0 9.65 57.2 39.6 33.3 7.87 0.348-10 124 20.6 22.4 12.7 57.2 44.5 39.6 11.2 0.59

11-13 141 25.4 25.4 14.2 63.5 50.8 49.3 12.7 1.0214-16 171 31.8 30.2 17.5 76.2 63.5 57.2 14.2 1.81

19 202 38.1 35.0 20.6 88.9 76.2 66.8 16.0 2.6422 235 44.5 41.4 24.6 102 88.9 79.5 19.1 4.4725 268 50.8 50.8 28.7 114 102 97.3 22.4 6.9229 300 57.2 57.2 31.8 127 114 105 25.4 9.75

32-35 335 63.5 63.5 38.1 140 127 121 28.7 14.138 384 76.2 69.8 41.4 152 152 137 30.2 21.441 413 76.2 76.2 44.4 165 165 146 33.3 27.2

44-48 463 88.9 88.9 50.8 190 178 165 39.6 38.151-54 546 102 95.2 57.2 216 229 178 46.0 56.757-60 597 114 108 65.0 229 254 197 54.1 75.764-67 648 127 121 73.2 248 273 216 60.5 11470-73 692 133 127 79.3 279 279 229 73.2 14376-79 736 146 133 85.8 305 286 241 76.2 17283-86 784 159 140 91.9 330 299 254 79.2 19789-92 845 171 152 98.6 356 318 273 82.5 255

95-102 921 190 178 108 381 343 318 88.9 355

Wireropedia.mm

Weightkg

each

A C D F J L M N

Dimensions in mm

page 8

Sp

elt

er

So

ck

ets

MOORING SOCKETS

SNUB NOSE SOCKETS

page 9

Sn

ub

No

se

/ M

oo

rin

g S

oc

ke

ts

2 394 51 203 110 57 210 54 133 149 4 29

2 1/4 438 60 219 133 64 229 64 149 160 4 32

2 1/2 511 70 279 146 70 257 73 184 207 6 71

2 3/4 546 76 305 149 73 267 79 203 222 6 84 30

3 579 79 305 160 83 282 79 218 222 6 90 31

3 1/4 625 85 320 170 91 305 95 235 235 6 125 32

3 1/2 680 90 340 180 99 335 100 255 248 6 145 33

SocketSize

(inches)

Dimensions (mm) WeightEach(kg)

TA B C D F J K L P R

Various Sizes Available on Request

Suitable for fibre-rope

Material: Mild Steel

Finish: Galvanised/plastic coating on request

Suitable for wire-rope


Finish: Galvanised/self coloured

Size A Bmm mm mm

8 22 3610 26 4112 32 4816 42 6220 51 7922 56 9026 67 11228 73 11732 94 13336 101 15342 114 17248 132 22152 139 213

THIMBLES

TUBULAR THIMBLES

HEAVY DUTY STUB-END THIMBLES

page 10

Th

imb

les

Ropesizeinch

A

mm

B

mm

C

mm

D

mm

E

mm

F

mm

G

mm

X

mm

H1

mm

H2

mm

Weight

kgs

6

8

10

12

15

18

21

24

27

254

305

419

521

625

727

829

930

1035

200

250

360

420

510

610

740

880

1020

110

153

210

260

312

368

415

465

517

-

-

168

194

194

219

219

273

273

60

80

124

144

144

169

169

201

201

-

-

105

130

150

175

200

225

250

30

40

15

20

25

30

30

40

50

-

-

-

10

40

40

40

40

40

64

82

105

130

158

183

206

229

260

70

89

114

140

168

194

219

245

273

22

26

34

50

80

140

180

260

380

A

Inch

J

mm

K

mm

L

mm

M

mm

X

mm

Packing Weight

100/pcs/kgs

221/2331/2441/25

51/26789101112141719222426

425050737585

100110115135155175190210225240290320375410450

3545556575809095

120140160185195215240250310360405450480

22303545505360657080

100115120130140150180220240250280

9111315171921232530333841465256708192

105130

1416182022252933343844495260656882

119127145155

600400300150150757540402520

810202636506070

100160180350440520730

110017002800340044005600

Tolerance 5%

Special dimensions on request. Tolerance 5%

Suitable for fibre-rope


Finish: Painted

THIMBLES WITH LINK

THIMBLES

page 11

Th

imb

les

1. Hot Dip Galvanized and Paint2. Light Weight Heavy Duty3. For Marine Towing Industry

Ropesize inch

A

mm

C

mm

E

mm

L

mm

M

mm

H

mm

G

mm

I

mm

MBLlinktons

Weight

kgs

9/101/2

9/101/2

12/131/2

12/131/2

14/15

14/15

16/18

16/18

19/20

19/20

20/21

20/21

20/21

370

370

450

450

520

520

580

580

600

600

600

600

600

290

290

330

330

370

370

390

390

440

440

440

440

440

15

15

20

20

20

20

20

20

20

20

20

20

20

16

16

20

20

20

20

20

20

20

20

20

20

20

96/100

96/100

110/115

110/115

130/135

130/135

150/155

150/155

165/170

165/170

175/180

175/180

175/180

51

57

57

63

63

72

72

80

80

90

90

100

125

350

400

400

430

430

440

440

450

450

460

460

500

650

190

200

200

230

230

250

250

250

250

300

300

300

400

144

188

188

232

232

336

336

420

420

524

524

628

1000

37

45

57

64

80

94

98

114

127

140

180

195

285

LInk can be connected to any thimble. Tolerance 5%

HAWSER SHACKLES

page 12

Ha

ws

er

Sh

ac

kle

s /

Th

imb

les

tons mm mm mm mm mm mm kg kg0.33 5 6 9.5 19 22 16 0.02 -0.5 7 8 12 25 29 20 0.06 0.070.75 9 10 13.5 27 32 21 0.11 0.131 10 11 17 31 36.5 26 0.15 0.171.5 11 12 19 37 43 29 0.21 0.252 13.5 16 20.5 43 47.5 32 0.37 0.443.25 16 19 27 51 60.5 43 0.65 0.794.75 19 22 32 59 71.5 51 1.06 1.266.5 22 25 36.5 73 84 58 1.56 1.888.5 25 28 43 85 95 68 2.32 2.789.5 28 32 46 90 108 75 3.28 3.87

12 32 35 51.5 94 119 83 4.51 5.2613.5 35 38 57 115 133 92 5.93 6.9417 38 42 60 127 146 99 7.89 8.7925 45 50 73 149 178 126 13.40 14.9935 50 57 83 171 197 138 18.85 20.6542.5 57 65 95 190 222 160 26.06 29.0155 65 70 105 203 266.5 180 37.86 41.0585 75 83 127 230 330 190 - 62.24

120 90 95 146 267 381 238 - 110

D d a C C 2r SCREWPINSAFETY

PIN

WORKINGLOADLIMIT

DIABOW

DIAPIN

INSIDEWIDTH

INSIDE LENGTH

CHAINTYPE

ANCHORTYPE

WIDTHOF BOW

APPROX. WEIGHTEACH

STANDARD SHACKLES

Material : body and pin high tensile steel, quenched and tempered. Safety factor : 6 times WLL = minimum breaking strength. Finish : galvanized. Standard : generally to U.S. Federal Specification RR-C-271.

HEAVY DUTY SHACKLES

Material : body and pin alloy steel, quenched and tempered. Safety factor : 5 times WLL = minimum breaking strength. Finish : painted. Forging tolerances : on inside width and length 5%.

Gre

en

Pin

Sh

ac

kle

sD d a C 2r SAFETY PIN

mmtons mm mm mm mm kg150 102 108 165 400 275 160200 120 130 175 500 290 235250 125 140 200 540 305 285300 135 150 200 600 305 340400 165 175 225 650 325 560500 175 185 250 700 350 685600 195 205 275 700 375 880700 205 215 300 700 400 980800 210 220 300 700 400 1100900 220 230 320 700 420 12801000 230 240 340 700 420 1460

WORKINGLOADLIMIT

DIABOW

DIAPIN

INSIDEWIDTH

INSIDELENGTHANCHOR

TYPE

WIDTHOF BOW

APPROXWEIGHT

EACH

ANCHOR SHACKLE WITHSCREW COLLAR PIN(TYPE IVA, CLASS 2)

G-4161

CHAIN SHACKLE WITHSCREW COLLAR PIN(TYPE IVB, CLASS 2)

G-4151

SAFETY ANCHOR SHACKLEBOLT TYPE

(TYPE IVA, CLASS 3)G-4163

SAFETY CHAIN SHACKLEBOLT TYPE

(TYPE IVB, CLASS 3)G-4153

HEAVY DUTYANCHOR SHACKLE

P-6036

page 13

Sh

ac

kle

s /

Sn

atc

h B

loc

ks

1 High load safety shackle

2 Grease lubricated head fitting

3 Head fittings are interchangeable by qualified engineer followed by retest

4 Locking pin safety feature prevents fill retraction from head assembly

5 Large finger nut lugs are positioned away from the side plate to aid gripand prevent damage to finger

6 Clearly marked label in metric tonnes giving rope size, capacity andidentification number

7 Taper roller bearings fitted as standard unless stated

8 Grease lubrication through sheave pin

9 Safety pin prevents accidental or unintentional loosening of the finger nut also positioned on the operators side of the block for easy access

10 Sheave diameter and rope capacity are manufactured to customersindividual requirements

GREEN PIN SLING SHACKLES

HEAVY DUTY LIGHT WEIGHT SNATCH BLOCKS

Workingload

tons

DiaBody

D mm

DiaPin

D mm

InsideWidth

a mm

Insideof bow

2r mm

Bearingsurface

E mm

ApproxWeightper pce.

kg5075

125

150200250

300400500

600700800

90010001200

606476

89102110

130150170

190210220

240260270

577080

95105121

134160180

200215230

250270300

95105130

140150170

185220250

275300325

350380430

160186220

250276300

350370450

494540554

584614644

5067110

160220320

350635803

103112601710

198027502950

108120150

170205240

265320340

370400420

440460530

Sn

atc

h B

loc

ks

/ D

ec

k E

qu

ipm

en

t

HEAVY DUTY LIGHT WEIGHT SNATCH BLOCKS

Smit Bracket

Horizontal Deck Sheave

Snatch Blocks

Mo

ori

ng

Eq

uip

me

nt

STUDLINK DIMENSIONS

Stu

dli

nk

An

ch

or

Ch

ain

20,5 175 244 244 349 249 376 9,2 33122 200 280 280 401 286 431 10,6 30924 237 332 332 476 339 511 12,6 28326 278 389 389 556 397 598 14,8 26128 321 449 449 642 458 691 17,2 24330 368 514 514 735 524 790 19,7 22532 417 583 583 833 594 895 22,4 21134 468 655 655 937 668 1007 25,3 19936 523 732 732 1050 746 1124 28,4 18938 581 812 812 1160 828 1248 31,6 17940 640 896 896 1280 914 1377 35,0 16942 703 981 981 1400 999 1513 38,6 16144 769 1080 1080 1540 1097 1654 42,4 15546 837 1170 1170 1680 1194 1800 46,3 14748 908 1270 1270 1810 1295 1952 50,4 14150 981 1370 1370 1960 1400 2110 1480 2110 2160 2740 54,8 13552 1060 1480 1480 2110 1508 2273 1590 2270 2330 2960 59,2 13154 1140 1590 1590 2270 1620 2441 1710 2440 2500 3170 63,8 12556 1220 1710 1710 2430 1735 2615 1830 2610 2680 3400 68,7 12158 1290 1810 1810 2600 1854 2794 1960 2794 2860 3630 73,6 11760 1380 1940 1940 2770 1976 2978 2090 2978 3050 3870 78,8 11362 1470 2060 2060 2940 2101 3166 2220 3170 3240 4120 84,2 10964 1560 2190 2190 3130 2230 3360 2360 3360 3440 4370 89,7 10566 1660 2310 2310 3300 2361 3559 2500 3560 3640 4630 95,4 10368 1750 2450 2450 3500 2496 3762 2640 3760 3850 4890 101,3 9970 1840 2580 2580 3690 2634 3790 2780 3970 4060 5160 107,3 9773 1990 2790 2790 3990 2846 4291 3010 4290 4390 5580 116,7 9376 2150 3010 3010 4300 3066 4621 3240 4620 4730 6010 126,5 8978 2260 3160 3160 4500 3216 4847 3400 4850 4960 6300 133,2 8781 2410 3380 3380 4820 3446 5191 3640 5190 5320 6750 143,7 8384 2580 3610 3610 5160 3683 5550 3890 5550 5680 7220 154,5 8187 2750 3850 3850 5500 3924 5916 4150 5920 6060 7690 165,8 7790 2920 4090 4090 5840 4173 6289 4410 6290 6440 8180 177,4 7592 3040 4260 4260 6080 4342 6544 4590 6540 6700 8510 185,4 7395 3230 4510 4510 6440 4599 6932 4860 6930 7100 9010 197,6 7197 3340 4680 4680 6690 4774 7195 5040 7200 7370 9360 206,1 71

100 3530 4940 4940 7060 5040 7596 5320 7600 7780 9880 219,0 67102 3660 5120 5120 7320 5220 7868 5510 7870 8050 10230 227,8 67105 3850 5390 5390 7700 5495 8282 5800 8280 8480 10770 241,4 65107 3980 5570 5570 7960 5681 8561 6000 8560 8760 11130 250,7 63111 4250 5940 5940 8480 6058 9130 6400 9130 9350 11870 269,8 61114 4440 6230 6230 8890 6346 9565 6700 9570 9790 12440 284,6 59117 4650 6510 6510 9300 6639 10005 7000 10000 10240 13010 299,8 57120 4850 6810 6810 9720 6935 10452 7320 10450 10700 13590 315,4 57122 5000 7000 7000 9990 7135 10753 7530 10750 11010 13980 326,0 55124 5140 7200 7200 10280 7336 11057 7750 11060 11320 14380 336,7 55127 5350 7490 7490 10710 7641 11516 8070 11520 11790 14980 352,2 53130 5570 7800 7800 11140 7950 11981 8390 11980 12270 15580 370,1 53132 5720 8000 8000 11420 8157 12294 8610 12290 12590 15990 381,6 51137 6080 8510 8510 12060 8682 13085 9170 13090 13400 17020 411,0 49142 6450 9030 9030 12910 9214 13887 9730 13890 14220 18060 441,6 47147 6840 9560 9560 13660 9753 14700 10290 14700 15050 19120 473,2 47152 7220 10100 10100 14430 10299 15522 10870 15520 15890 20190 506,0 45157 7600 10640 10640 15200 10850 16352 11450 16350 16740 21270 539,8 43162 7990 11170 11170 15970 11405 17189 12040 17190 17500 22350 574,7 43167 8370 11710 11710 16750 11963 18030 12650 18030 18460 23410 610,7 41172 8720 12260 12260 17530 12525 18876 13240 18880 19320 24510 647,9 39177 9160 12810 12810 18320 13088 19725 13840 19730 20190 25620 686,1 39

Diameter Approx Numberof Chain mass of links

Proof Break Proof Break Proof Break Proof Break Proof Break (Weight) perTest Test Test Test Test Test Test Test Test Test 27,5m

d Load Load Load Load Load Load Load Load Load Load

c 0.0098 0.0137 0.0137 0.0196 0.014 0.0211 0.0148 0.0211 0.0216 0.0274

mm KN KN KN KN KN KN KN KN KN KN kg/m

Anchor Chain for VesselGrade 2 Grade 3

IACS

Offshore Mooring ChainNV K 3 RIG

DNVORQ, RQ 3API, ABS

NV K4, RQ 4, OS 4DNV, ABS, LR

PROOF & BREAKING LOADS

Dimension RamforTM Nominal RamforTM slim Nominal Kenter Nominal Tolerance %Designation Dimension x .d Dimension x .d Dimension x .d + -

A 6.00 6.00 6.00 2.0 2.0B 4.20 4.20 4.20 2.0 2.0C 1.83 1.83 1.83 2.5 2.0E 0.67 0.67 0.67 0.0 2.5R 4.50 4.50 4.50 2.5 2.0K 1.40 1.40 1.40 2.5 2.0S 1.00 0.82 1.10 2.5 2.5M 1.41 1.41 1.45 2.5 2.5N 1.28 1.32 1.32 2.5 2.5W 1.34 1.22 1.34 2.5 2.0F 1.13 1.13 1.13 0.0 2.5T 1.59 1.59 1.59 2.5 2.0U 1.30 1.30 1.30 2.5 2.0D 1.52 1.30 1.52 2.5 2.0d 1.00 1.00 1.00 2.0 2.0r 0.03 0.03 0.03 - -R

am

for

Co

nn

ec

tio

ns

page 18

An

ch

or

Ch

ain

Fit

tin

gs

KENTER SHACKLES

JOINING SHACKLE D TYPE

ANCHOR SHACKLE D TYPE

ANCHOR SHACKLE D TYPE-ISO STANDARD

DETACHABLE CHAIN CONNECTING LINKC TYPE

SWIVEL

Pe

ar

an

d H

ing

e L

ink

sPEAR LINK DIMENSIONS

HINGE LINKS

Tonnes A B C D E F110 440 170 150 54 380 80150 570 225 200 76 400 108

Ch

afe

Ch

ain

s

An

ch

or

Ty

pe

s

Ste

vp

ris

Dim

en

sio

ns

DIMENSIONS OF VRYHOF STEVPRIS Mk5 ANCHORS

Ch

as

ers

/ G

rap

ne

lsPERMANENT CHAIN CHASERwith replaceable roller

J-TYPE CHAIN CHASER

PERMANENT CHAIN CHASER

TUG FENDERS

Tu

g F

en

de

rs

page 25

Dy

na

lin

es

/ W

ind

ers

32 Tonne capacity, Hydraulic SpoolingMachine with a mechanically operated brake.

50 Tonne capacity, double drumWaterfull Hydraulic Winches withair controlled braking system.

60 Tonne capacity, Hydraulic SpoolingMachine with a 10 Tonne capacity,electronically controlled, hold backtension facility.

Adjustable to suit 1300-3300mmreel widths,

Dynaline Line Load Dynomometers for wire rope.

Two sizes available - 90 Tonnes and250 Tonnes. (90 Tonne pictured)

Hir

e E

qu

ipm

en

t

Sheave Blocks and Snatch Blocks

Heavy Lift Slings

Spooling pendant wires onboard AHT

Testing of crane using waterbags

Twin shank, High Holding,Power Anchors

Ele

ctr

ic W

inc

he

sAvailable in a range of single phase and three phase.

240V SINGLE PHASECAPSTAN WINCH

ELECTRIC WINCHES

12 and 24 VOLT DC WINCHES

Model

Capacity kg 120 300

Motor Volt x Watt 12 x 100

4 x 12 5 x 12

10 14 15

5

12 x 300 24 x 300

Speed m/min

Rope mm x m

Weight kg

DH120 DH300 DH300A

Ele

ctr

ic W

inc

he

s

Available on request with capacities 100 to 4000 kg and lift heights 6 to 15m

SINGLE and 3 PHASE WINCHES

SINGLE and DOUBLE GROOVED DRUMS

Model CapacitykgSpeedM/min

MotorkW

Voltagex Phase

Wire Ropemm x m

Weightkg

CWL-150CWL-150LCWL-200LCWL-200CP-200CP-250CP-300

CWG-10077CWG-10151CWG-30151CWG-30265CWG-30375CWG-30565CWG-30750CWG-31500CWG-34000

1501502002002002503003004005006509001100220035005000

15-1815-1810-1310-1310-1510-1510-1512-1812-1812-1812-1812-2014-257-126-88-12

1.21.21.21.20.60.751.11.51.51.52.23.75.65.65.611.2

240 x 1240 x 1240 x 1240 x 1240 x 1240 x 1240 x 1240 x 1415 x 3415 x 3415 x 3415 x 3415 x 3415 x 3415 x 3415 x 3

5 x 455 x 705 x 455 x 706 x 306 x 306 x 307 x 389 x 609 x 609 x 6010 x60

12 x 10016 x 10018 x 15022 x 200

1518161932343744120120160220290450860

1500

Model A B C D E F

CWL-150CWL-150LCWL-200LCWL-200CP-200CP-250CP-300

CWG-10077CWG-10151CWG-30151CWG-30265CWG-30375CWG-30565CWG-30750CWG-31500CWG-34000

8x118x118x118x116x106x106x10

6x13.54x15.54x15.54x164x194x194x228x308x32

142197142197142142142197400400400500620600847920

135135135135142142142156325270325370495499680680

4164714164715105455896309379229409601100116014311860

210210210210210210210240367367367400470565740740

270270270270241241241300425425425445520658860905

CP 200-300kg

CWG 300-650kg

CWL 150-200kg

CWG 900-5000kg

PERTH

10 Sparks Road HENDERSON WA 6166Tel: +61 8 9410 2480 Fax: +61 8 9437 1126

DAMPIER

PO Box 25 DAMPIER WA 6713Brambles Supply Base, King Bay Road DAMPIER WA 6713

Tel: +61 8 9185 6056 Fax: +61 8 9185 6014

DARWIN

PO Box 457 BERRIMAH NT 08284 Cochrane Road, Hudson Creek, BERRIMAH NT 0828

Tel: +61 8 8947 3777 Fax: +61 8 8947 3700

www.unirig.com.au

Marketforce NBS0202CAT 1 01/04 REV 2

unirig lifting mooring[1]

Documents