OUR COMMITMENT

• To deal fairly and honestly in all situations and business relationships.

• To consistently innovate cutting-edge, green technology to meet the most unique

cooling and heating demands.

• To provide the highest level of engineering and manufacturing techniques in order

to deliver the best cooling/heating solutions and products possible.

Components

Base Frame & Floor

Base Fame Material: 6” or 8” tubular galvanized steel

Floor Material: 14 gauge G-90 galvanized steel Capped watertight

Floor Openings: Walkway bar grating is provided on all accessible floor openings

Lifting Lugs: Permanent, welded on lifting lugs are standard.

Components

Base Frame & Floor – Options

Base Materials: 304 Stainless steel 316 Stainless steel Aluminum

Floor Materials: 12 or 10 gauge G-90 galvanized 14, 12 or 10 gauge 304 stainless Steel 14, 12 or 10 gauge 316 stainless Steel Aluminum Treadplate (galvanized, aluminum or stainless)

Lifting Lugs: Removable / bolt-on type

Insulation: 4” x 3# pcf

Options: Auxiliary floor drains (non-piped or piped to

side of unit) Continuous welded floor

Optional Floor Grates:

304 stainless steel

316 stainless steel

Aluminum

Components

Unit Casing

Standard Casing: 2” Galvanized - 18 Gauge G-90

Standard Liner: 22 Gauge G-90 galvanized linerStandard Finish: Pre-paint enamel finish Color “desert beige”

Standard Internal Framing: 2 x 1 x 16 gauge G-90 galvanized tubing.

Standard Insulation: 2” x 1.56# pcf (3# equivalent)

Components

Casing and Liner Options

Components

Optional Casing Materials: All Casings are available in 4” thickness 16 Gauge – G-90 galvanized steel 16 Gauge – #304 or #316 stainless steel .060” Aluminum

Liner Options: Solid 22 gauge in either #304, #316

stainless or aluminum Perforated 20 gauge in either G-90

galvanized, #304 , #316 stainless or aluminum

Optional Casing Construction:

Thermal break

Optional Insulation: 2” or 4” x 1.5# pcf Fiberglass w/ neoprene coating 2” or 4” x 3# pcf with or without neoprene coating 2” or 4” 3# pcf rigid insulation

Demounts: Available as needed per site conditions.

Components

Custom Colors

Custom colors are available in a baked epoxy powder coating

Components

Demounts

Standard on units over 138”wide and

540” long.

Optional demounts: Available as needed by site conditions.

(Demounted sections have j-box and flexible whip on either side of demount when electrical is present in that section. All fasteners and gasketing material is shipped loose with the unit for field

installation by installing contractor.)

Components

Doors

Standard Doors: 18 Gauge G-90 galvanized steel exterior

22 Gauge G-90 galvanized liner

2” x 1.56# pcf insulation

Heavy duty stainless steel butt type hinges

Bulb type gasket

Ventlock #260 handles

Stainless steel hinges

Door Options: Ventlock #310 handles 12” x 12” view ports View port with desiccant pouch Thermal break construction Micro-door switch 18 Gauge 304 or 316 stainless exterior 16 Gauge G-90 galvanized, #304 or #316

stainless exterior .060 Aluminum exterior 22 Gauge 304 or 316 stainless liner 20 Gauge G-90 galvanized, 304 or 316

stainless

Components

Louvers & Weather Hoods

Louvers: Standard: 4” formed galvanized double drainable Epoxy powder coated with bird screen Nominal velocity of 500 FPM

Optional Louvers: High Velocity (Vertical Vane) – Storm proof Velocities up to 1000 FPM (Nominal) 4” aluminum double drainable 6” Formed Galvanized or 304, 316 Stainless - Drainable Velocities to 600 FPM

Weather Hoods:Standard: Intake Snorkel Type 18 Gauge G-90 Galvanized Steel with Bird screen Nominal Velocities to 750 FPMStandard: Discharge Angle Type 18 Gauge G-90 Galvanized Steel w/ Bird screen Nominal Velocities to 1,200 FPM.

Optional Materials: 0.060” Aluminum 16 Gauge 304 or 316 Stainless Steel with Matching Bird screen.

Components

Dampers Standard: Airfoil – Galvanized

Blade – with Edge & Jamb Seals

Options: Actuators – 2-Position, Modulating, Spring Return or Non-Spring Return Actuators can be mounted and wired or just mounted Airfoil – Extruded Aluminum – Ultra Low Leakage Dual Deck or Triple Deck Multi-zone Damper – Extruded Aluminum – Zones in multiples of 6” Actuators can be wired for either 24v or 120v

Components

Airflow Measuring

Grid mount or Bell mouth of air monitoring can be supplied and installed.

Components

Filtration

Filtration Options: Permanent aluminum washable filters 1” or 2”

depth 30% efficient pre-filters (2” or 4” Depth) Bag filters w/ efficiency ratings of 65%, 85% &

95%. Depths available are 15”, 22”, 30” & 36”. Rigid filters w/ efficiency ratings of 65%, 85% &

95%. Nominal 12” deep. HEPA filters w/ efficiency ratings of 99.9%,

99.99% & 99.999%. DOP rating is also available. Magnehelic gauges are available with all filter

arrangements. All outdoor units with magnehelic gauges have a sun cover to protect the dial from fading.

Any special filtration needs can also be accommodated

Framing Options: Standard frame is G-90

galvanized & gasketed. Front access is required.

Slide rails are provided for side access.

#304 or #316 Stainless frames are available.

HEPA filters must use a special sealing frame. These frames are G-90 galvanized steel.

Components

Coils

Water & DX Coils: ½” or 5/8” with 0.020” cooper tubes 0.006” aluminum fins 16 gauge galvanized casing. Tube walls 0.025”, 0.035”, 0.049” Fin thickness 0.0075” or .0090” Optional fin material – copper Optional Casing: Stainless Steel All cooling coils over 48” are stacked with an intermediate drain pan and copper downspouts All drain pans are IAQ double slope insulated Stainless steel is standard

Steam Coils: 5/8” or 1” with 0.025” copper tubes 0.0075” aluminum fins and 16 Gauge galvanized casing Optional tube walls: 0.035” & 0.049” Optional Fin Thickness 0.0090” Optional Fin Material - Copper Optional Casing: Stainless Steel

Components

Fans

Available Fans: Airfoil plenum Quiet airfoil plenum Airfoil DWDI Backward Incline DWDI Forward curved DWDI

Available Motor Types:

ODP – High efficiency ODP – Premium

efficiency TEFC – High efficiency TEFC – Premium

efficiency

Isolation: Standard 1” deflection housed isolators optional 2” & 3” All fans are mounted on structural isolation bases

Optional Fan Coatings: Air dried or baked epoxy, air dried or

baked heresite or phenolic coating

Optional Fan Materials: Aluminum wheel, housing and/or

frame #304 or #316 stainless steel

housing, wheel (backward incline DWDI only) and/or shaft

Components

Specialty Fans

Hostile Enviroment Available Construction: AMCA spark ‘B’ construction

Specialty Motor Types: Mill and chemical duty explosion proof

Additional specialty fans and motor arrangements are also available

Components

Furnaces

Various Types of Furnaces are Available for Installation Indirect (Duct Type) – Indoor or outdoor

Indirect – drum & tube power burner

Electric resistance

Direct fired

Control Options: On-Off

Hi-Lo-Off

Modulation (mechanical, electronic, or external control signal)

*Heat exchanger materials are 400 series stainless steel, except for electric

resistance type.

Components

Evaporative Cooling

Standards: 16 Gauge 304 stainless sump 16 & 18 Gauge 304 stainless casings Type ‘L’ copper piping w/ manual Balancing valve & metered bleed Stainless steel pump (304 stainless pumps are available) Additional horse powers are also available. Media is available in CelDek or Class II fire rated Standard piping is copper. Schedule 40 or 80 PVC is available

Components

Humidification

Self-generating Steam Steam to steam Steam dispersion Multi-stage evaporative

Types of Humidifiers Available for Installation:

Components

Acoustics

Options: Client’s have the option of having an acoustical analysis performed based on the components selected.

Various types of traps can be installed.

Components

Low Temperature Cooling Tower

Options: Low Temperature Tower with evaporative cooling

Cooling technology to lower water temperature within 2-3 degrees of wet-bulb

Typical efficiencies of 70- 75% are normal

Construction:Sump: 12 gauge 304 Stainless

Steel

Casing: 16 & 18 gauge 304 stainless steel

Media: CelDek or GlasDek

Pump: end suction w/ stainless housing

Piping: Copper or PVC

Components

Condensing Unit

Mounting & Piping of Condensing Units is Available

Components

Boiler / Equipment Room

Option: Units can be equipped with an integral “equipment room”

Components

Options: Motors wired to J-box

Single point electrical w/ starters

Single point electrical w/ VFD’s

Complete custom controls system

Special Purpose Enclosures

ElectricalSss

Testing Options

Unit Testing

Testing Options: All units are run tested before being loaded for shipment

Test reports are available upon request

ETL Tested

Custom Air Handling

Custom-Air ®

Benefits and Features: Double/single wall construction Evaporative cooling Special filtration Humidity control DX coils

Chilled water cooling coils Hot water heating coils Steam heating coils Gas heat Controls

Custom Air Handling

Modular Air Handling Unit (MAHU)

Benefits and Features: Modular design - can be split between any section Low profile design suitable for ceiling or floor mounting Indoor and outdoor units Low-leak cabinet construction - less than 1% CFM cabinet leakage at a positive pressure of 6″WG TSP Complements UMPs larger custom-air range Internally isolated direct drive plug fan for quiet operation and zero belt maintenance 500 to 11,000 CFM @ up to 6.00″ TSP

2” and 4” double wall construction, perforated or solid lined 26 standard cabinet sizes Inlet / mixing modules – all duct locations available Panel and box filters up to MERV 14 HW, CW, DX and steam coils available up to 10 rows deep #304 SS double sloped drain pans Gas or electric heat options ETL listed and labeled in accordance with UL1995

Custom Air Handling

Vertical Air Handling Unit (VAHU)

Benefits and Features: Small footprint with main access on one side Internally isolated direct drive plug fan for quiet operation and zero belt maintenance 500 to 5,400 CFM @ up to 6.00″ TSP 2” double wall construction, perforated or solid lined 18 gauge G90 galvanized steel cabinet - stainless steel or Hybralume™ available

4 standard cabinet sizes Inlet / Mixing modules Panel and 4” box filters up to MERV 14 14 HW and CW coils as standard #304 SS double sloped

drain pans Pre-wired for single point power connection ETL listed and labeled in accordance with UL1995

Energy Recovery

Energy Recovery Unit ™ (ERU)

Benefits and Features: 0-100% outside air 5,000 to 40,000 CFM and higher Production or custom design Energy recovery: heat pipe, air to air, air to water, heat wheels Engineered primarily for high outside air requirements: 30%-100%

Energy recovery: heat pipe, air to air, air to water, heat wheels Engineered primarily for high outside air requirements: 30%–100% ETL labeling available

Energy Recovery

Energy Recovery Figure 1 The Wet Bulb Energy

Recovery System

Wet Bulb Energy RecoveryUnited Metal Products is the industry innovator and leader with regards to effective energy recovery in high dry bulb regions. UMP has spent the last fifteen years perfecting the technology called “Wet Bulb Energy Recovery.” The key to super efficient energy recovery efficiency in the high dry bulb regions of the world is moving the temperature exchange at the wet bulb temperature as opposed to the dry bulb level when the air exits the unit. When this cutting edge method is implemented, energy recovery efficiencies of over 100% can be attained. Not only does this translate into a smaller carbon footprint left on the environment, but it can also mean an increase in an organization’s bottom line.

Wet Bulb Energy Recovery

The Wet Bulb Energy Recovery System

Components

Energy Recovery Options

Cross FlowThese systems are the most efficient with regards to sensible energy recovery as they can provide up to 75% efficiency. They also have no moving parts, an extremely compact design, and a competitive cost.

Heat WheelThese systems run up to 65% efficient with regards to sensible energy recovery. The main advantage of the heat wheel is that it has minimal moving parts. However, the size of the heat wheel determines the size of the unit and this limits design flexibility.

Heat PipesThese systems run between 55%-65% efficient with regards to sensible energy recovery. The main advantage of these units is that they have no moving parts which means very little maintenance is necessary. They provide the highest CFM of the energy recovery units and are offered in custom configurations.

Evaporative Technologies

Cel-Air ®

Benefits and Features: 120 cataloged sizes from 6,000-100,000 CFM 2″ double wall or single wall construction Galvanized, aluminum, stainless steel materials 5,000-100,000 CFM and above Evaporative cooling ETL Labeled under UL1995 Standards

Evaporative Technologies

Fan-Air ®

Benefits and Features: Commercial and industrial applications Models UMP-700 Series are AMCA Licensed Up to 60% energy savings over other evaporative coolers

Low profile ETL - labeled under UL 507 Powder coated Gas Heat options available

Innovative Design

Direct Replacement Unit ™ (DRU)

Benefits and Features: Direct replacement for UMP FanAir coolers 15 Ton / 6000cfm supply air Other sizes in development Supply/Return duct and drum louver diffuser available 1” double wall Hybralume™ construction Hinged access doors Economizer and recovery 2” pre-filters up to MERV 8

Double-sloped drain pan under cooling coil Direct drive blower plenum fan with VFD drive Single or dual point power connections Supply and return air smoke detectors R-410A refrigerant ETL listed and labeled in accordance with UL1995

Packaged Central Plant

Chil-Pak ®

Benefits and Features: Pre-engineered package saves on valuable lead Economical for projects down to 150 tons Water side plate and frame economizer option Pre-tested, labeled, and listed under ETL Compact Design

Saves labor in installation, single point c.w., controls and electricity Single point of responsibility 2” double wall construction Sound Secure System

Applications

Various Applications

Convention centers Factories Food processing plants Gymnasiums

Aircraft hangars Call centers Casinos Clean rooms

Military facilities Indoor pools Kitchens Manufacturing facilities Textile factories

Theaters Warehouses Water treatment plants

Pharmaceutical labs Prisons Schools Terminals

Hospitals Mining facilities Museums Office buildings