unitronics 2009. hardware review jazz ® series m91 series vision120™ series vision130™...

Unitronics 2009

Unitronics 2009

Hardware Review Jazz® Series

M91 Series

Vision120™ Series

Vision130™ Series

Vision Graphic/Touch OPLC

Color Vision

Software & Utilities

Review

Hardware Review


Review

Key Points:

Two line display

Real Keypad for Data entry

Modbus and openprotocol communication

SMS/ cellular connection

Auto-tune PID, up to 4 loops

Full project upload

Low cost

Jazz® Micro OPLCTM

9 models of JazzTM OPLC

JZ10-11-R10 – 6 DI, 4 RO

JZ10-11-T10 – 6 DI, 4 TO

JZ10-11-R16 – 6 DI, 2 D or A (0-10V) inputs, 2 AI (0/4-20 mA), 6 RO

JZ10-11-T17 – 6 DI, 2 D or A (0-10V) inputs, 2 AI (0/4-20 mA), 7 TO

JZ10-11-T40 – 16 DI, 2 D or A (0-10V) inputs, 2 AI (0/4-20 mA), 20 TO

JZ10-11-PT15- 3 DI, 3 D or A inputs, 3 PT1000/NI1000 inputs, 5 RO and 1 TO (HSO)

Jazz® Micro OPLCTM

JZ10-11-R31 – 16 DI, 2 D or A (0-10V) inputs, 2AI (0/4-20 mA), 11 RO

JZ10-11-UN20 – 9 DI, 2 D or A (0-10V) inputs, 1 AI (0/4-20 mA), 1 PT100/TC inputs, 5 RO, 2 TO

JZ10-11-UA24 – 9 DI, 2 D or A (0-10V) inputs, 2 AI (0/4-20 mA), 2 PT100/TC inputs, 5 RO, 2 TO, 2 Analog Outputs

Key Points:

Two line display


Modbus & open protocol communication

SMS via GSM communication

Full project upload

Auto-tune PID, up to 4 loops

Expandable

Small Data Base (1024 registers)

Low cost

M91 Micro OPLCTM

M91-2-R1 - 10 DI, 1 AI , 6 RO

M91-2-R2C - 10 DI, 2 AI , 6 RO

M91-2-R34 - 20 DI, 2 A/D I, 12 RO

M91-2-R6C - 6 DI, 6 AI, 1HSI, 6 RO

M91-2-RA22 - 8 DI, 2 A/D I 14 bit +2 TC/PT100, 2 AO 12 bit, 8 RO

M91-2-T1 - 12 DI, 12 TO

M91-2-T2C - 10 DI, 2 A/D I , 12 TO

M91-2-T38 - 22 DI, 16 TO

M91-2-UN2 - 10 DI, 2 A/D/TC/PT100 Inputs (14 bit) , 12 TO

M91-2-UA2 - 10 DI, 2 A/D/TC/PT100 Inputs, 12 bits, 2 AO 12 bits , 10 TO

10 models of the M91 OPLC

M91 Micro OPLCTM

Key Points:

Graphic display 128x64


Application size of 448K

2 serial ports RS232/485

Modbus and open protocol communication

Supports CANopen

SMS/cellular connection-GSM/GPRS

Full project upload

Expandable

Data Table

Vision120TM Graphic OPLCTM


V120-22-R1 - 10 DI, 1 AI , 6 RO

V120-22-R2C - 10 DI, 2 AI , 6 RO

V120-22-R34 - 20 DI, 2 A/D I, 12 RO

V120-22-R6C - 6 DI, 6 AI, 1HSI, 6 RO

V120-22-RA22 - 8 DI, 2 A/D I 14 bit +2 TC/PT100, 2 AO 12 bit, 8 RO

V120-22-T1 - 12 DI, 12 TO

V120-22-T2C - 10 DI, 2 A/D I , 12 TO

V120-22-T38 - 22 DI, 16 TO

V120-22-UN2 - 10 DI, 2 A/D/TC/PT100 Inputs (14 bit) , 12 TO

V120-22-UA2 - 10 DI, 2 A/D/TC/PT100 Inputs, 12 bits, 2 AO 12 bits , 10

TO

10 models of the V120 OPLC


Key Points:Graphic display 128x64, 2.4"Real Keypad for Data entryApplication size of 512K; 20µsec per 1K1 build in serial ports RS232/485Option for a second port RS232/485 or EthernetModbus and open protocol communication serial and over IP

Supports CANopen (CANbus as an add on module)

GPRS/GSM/CDMA enabledFull project uploadExpandableData Table, Text string library

V130-33-R2 - 10 DI, 2 A/D I, 6 RO

V130-33-R34 - 20 DI, 2 A/D I, 12 RO

V130-33-RA22 - 8 DI, 2 A/D I 14 bit +2 TC/PT100, 2 AO 12 bit , 8 RO

V130-33-T2 - 12 DI, 2 A/D I, 3HSI and 7 HSO , 12 TO

V130-33-T38 - 22 DI, 2 A/D I, 3HSI and 7 HSO, 16 TO

V130-33-TA24 - 12 DI, 2 A/D I 14 bits +2 TC/PT100,

2 AO 12 bits, 1HSI 5 HSO , 10 TO

9 models of the V130 OPLC


V130-33- R6 – 6 DI, 2 A/D I, 4 AI, 1HSI, 6 RO

V130-33-TRA22- 12 DI, 2AI, 2 PT100/TC, 1HSC, 4 RO,

2 AO, 4 HSO.

V130-33-TR34- 22 DI, 2 AI, 3 HSC, 8RO, 4 HSO.

VisionTM Graphic/Touch OPLCTM (V230/260/280/290/530)


Key Points:

Graphic display 128x64 to 320x240; 3.2” – 5.7”

Real Keypad for Data entry/virtual keyboard on the touch

Application size of 1MB;

30µsec per 1K

2 build in serial ports RS232

Option for a 3rd port RS232/485 or Ethernet

Supports CANopen

GPRS/GSM/CDMA enabled

Full project upload

Expandable

Data Table

Modbus and open protocol communication

EX-A1-expansion adapter

IO-DI8-TO8

IO-DI16

IO-TO16

IO-DI8-RO4

IO-RO8

IO-RO16

IO-DI8ACH

EX90-DI8-RO8

IO-AI4-AO2

IO-AO6X

IO-ATC8

IO-LC1/3

Fast response


Expansions

IO-PT400

IO-PT4K

6 Snap-in models:

V200-18-E1B

V200-18-E2B

V200-18-E3XB

V200-18-E4XB

V200-18-E5B

V200-18-E6B


Snap-in I/Os

The EX-RC1 enables you to remotely locate I/Os up to 1 kilometer from a PLC. You can include both PLCs and

adapters on the UniCAN network, up to a total of 60 nodes.

Up to 8 I/O modules can be connected to a single adapter.

EX-RC1- Remote IO Adapter

IO D16A3-RO16 / TO16

EX-D16A3-RO8 / TO16

24 VDC

16 Digital Inputs

PNP/NPN, including 2 HS Counters

3 Analog Inputs

16 Relay/Transistor Outputs

24 VDC

16 Digital Inputs

PNP/NPN, including 1 HS Counters

3 Analog Inputs

15 PNP+ 1 PNP/NPN Transistor Outputs,1 HSO

Or 8 Relay output (model EX-D16A3-RO8)

XL Expansion Modules

VisionTM Color OPLCTM

Vision350TM - The first 3.5“ colorTouch screen OPLCon the market

Digital, Analog and PT100/TC

inputs, Digital and Analog outputs

Application size of 1MB, 15µsec per 1K

Supports CANopen

Ethernet option

QVGA color TFT display

Support Micro SD



9 models of the Vision 350TM OPLC

V350-35-R2 - 10 DI, 2 A/D I, 6 RO

V350-35-R34 - 20 DI, 2 A/D I, 12 RO

V350-35-RA22 - 8 DI, 2 A/D I 14 bit +2 TC/PT100, 2 AO 12 bit , 8 RO

V350-35-T2 - 10 DI, 2 A/D I, 3HSI and 7 HSO , 12 TO

V350-35-T38 - 20 DI, 2 A/D I, 2 HSI and 7 HSO, 16 TO

V350-35-TA24 - 8 DI, 2 A/D I 14 bits +2 TC/PT100, 2 AO 12 bits, 1HSI 5 HSO , 10

TO

V350-35- R6 – 6 DI, 2 A/D I, 4 AI, 1HSI, 6 RO

V350-33-TRA22- 12 DI, 2AI, 2 PT100/TC, 1HSC, 4 RO, 2 AO, 4 HSO.

V350-33-TR34- 22 DI, 2 AI, 3 HSC, 8RO, 4 HSO.

High Speed NPN Transistor output:Frequency Range 5-200 kHzSupport PTO

Driver TypePNP/NPNPush-Pull

HSC100 kHz Max200 kHz Max

Shaft encoder50 kHz Max100 kHz Max

HSC / Shaft Encoder

V130 & V350 with TRA22 or TR34 I/O board

TFT Color Graphic display, QVGA

Application size of 2MB; 9µsec per 1K

2 build in serial ports RS232/485

Option for a 3rd port RS232/485 or Ethernet

Modbus and open protocol communication serial or over IP

Build in Alarms, string library and trends tasks

CANopen Support

SD Support

Web server capabilities

And much more…And much more…


Vision570TM - 5.7 “color Touch screen

OPLC plus Snap-in & expansion I/Os


V570-57-T34: 16 DI (Isolated), 2 HSC / Shaft Encoder,

2 AI, 16 TO (Isolated)

The New V570 model with built in I/O

Review

About Unitronics

Hardware Review


Software - programming environment

All Vision products are programmed using the Visilogic

In order to ensure Backwards compatibility Unitronics provides also the Version swapper

M91 and Jazz are programmed using the U90Ladder

Software Utilities - Remote Access

Using Remote Access one can access the displays of the PLC, operand values, data tables and even download using the UniDownloader

A tool that the machine builder/system integrator can give his customer as an added value for its selection to work with Unitronics’ products

Software Utilities - DataXport

DataXport is a server based application that allows to retrieve the data stored at the data tables of the PLC using different communication methods and based on automatic process

Software Utilities - Communication

DDE/OPC gives a standard way to connect to the Unitronics OPLC using any SCADA or other Windows based application

Software Utilities – SD Suite

SD Suite Use SD Suite to format an SD card to be compatible with Unitronics OPLC, and to Access,convert, read, and export the content of files that a Unitronics OPLC creates on a SD card.

Software Utilities – Remote Operator

Remote Operator - Enables you to use a PC to view and work with several remote controller's HMI panel at the same time.

Software Utilities – UniDownloader

UniDownloader - Enables you to download complete applications to local or remote controllers. These applications are in compressed .udc format.

Thank you

unitronics 2009. hardware review jazz ® series m91 series vision120™ series vision130™...

Documents