unlicensed wimax

Slide titleIn CAPITALS

50 pt

Slide subtitle 32 pt

Unlicensed WiMax

Top right corner for field-mark, customer or partner logotypes. See Best practice for example.

Slide title 40 pt


Text 24 pt

Bullets level 2-520 pt

Ericsson Confidential 2008-12-112

Default IP for Local Login :- 10.0.0.1 / 255.255.255.0

Password 1.Read Only - public2.Installer - user3. Administrator - private

ANG -Wireless


Slide title 40 pt


Text 24 pt



Press 3 to login through Administrator

Type Password > xxxxxxx (private) than Press enter

Main Menu will come

ANG -Wireless


Slide title 40 pt


Text 24 pt



Main Menu-3-

Go to 3rd option forBasic Configuration

Here we have to configured IP , Subnet Mask, ESSID ,Frequency, Channel B/W ,Management VLAN etc.

ANG -Wireless


Slide title 40 pt


Text 24 pt



Go to 1 ( IP Address ) for IP configuration

Type IP after > 172.031.057.082 than enter

To take effect reboot the system .

Main Menu -3-1-

ANG Wireless


Slide title 40 pt


Text 24 pt



Go to 2 (Subnet Mask ) >255.255.255.240 than enter

To take effect Reboot the system

Same steps for Default Gateway

Main Menu -3-2-

ANG -Wireless


Slide title 40 pt


Text 24 pt



Go to 4 for ESSID Type after > SUMON1234 ( It may be Base station name or location ) same you have to configured at CPE end (Customer end ) . Than only CPE will identify to which BTS CPE will communicate .

(The ESSID (Extended Service Set ID) is a string used to identify a wireless network and to prevent the unintentional merging of two wireless networks or two sectors in the same network. Typically, a different ESSID is defined for each BTS )

Main Menu -3-4-

ANG -Wireless


Slide title 40 pt


Text 24 pt



Main Menu-3-F-S

Go to F ( Frequency Definitions )

1.Sub band select2.Frequency3.Country codeS. Show frequency Definitions

Press S for show .

Press 1 for to select sub band(Channel B/W).

Press 2 for to Configured Current frequency

ANG -Wireless


Slide title 40 pt


Text 24 pt



Main Menu -3-F-1

Go to 1(sub Band select) It will show you Available Sub Bands(Channel B/W) Type 1 to select 20 MHZ OR Type 2 to select 10 MHZ

ANG -Wireless


Slide title 40 pt


Text 24 pt



Main Menu-3-F-2

Go to 2 (Frequency )

Three options will come .1.Bandwidth 20 MHZ2.Bandwidth 10 MHZS. Show Frequency

Go to S . It will show You Frequency available in 20MHZ and 10 MHZ channels

ANG -Wireless


Slide title 40 pt


Text 24 pt



Main Menu-3-F-2-2

If you want to selectchannel B/W 10 MHz Than Go to 2 .

It will show you Frequency available in 10MHz channel

Type the frequency you want to configure

ANG -Wireless


Slide title 40 pt


Text 24 pt



Main Menu-3-V

Go to V (VLAN Support)

1-VLAN ID –Management

>>> Go to 1

Type Management VLA N ID

ANG -Wireless


Slide title 40 pt


Text 24 pt



Main Menu-5-4-S

Go to 4 (Bridge Parameters)

Than Go to 1 (VLAN support)

ANG -Wireless


Slide title 40 pt


Text 24 pt



Main Menu -5-4-1-2

Go to 2 (VLAN Link Type)

1- Trunk Link2- Hybrid Link 3-Service Provider Link

Type 2 for Hybrid

ANG -Wireless


Slide title 40 pt


Text 24 pt



Main Menu-5-4-1-3

Go to 3 (VLAN forwarding)

This option to configured DATA VLAN .

ANG -Wireless


Slide title 40 pt


Text 24 pt



Main Menu-5-4-1-3-2

Go to1(VLAN Forwarding Support ) – To enable VLAN forwarding support

Go to 2 (Add Forwarding VLAN ID) – To Add DATA VLAN

Go to S (Show VLAN ID forwarding List )

It will show :-VLAN Forwarding Support: EnableVALN forwarding List: 810

810 Data VLAN for customer

ANG -Wireless


Slide title 40 pt


Text 24 pt



Problem and Indication Possible Cause Corrective Action

Wrong type of Ethernet cable

If connected directly to PC-use acrossed cable. Otherwise-use a straight cable.

Faulty Ethernet cable Replace cable

Wrong IP configurationMake sure that the PC is on the samesubnet as the unit*.

Wrong Ethernet portoperation mode

Make sure that the speed and duplexsettings in the PC match theconfiguration in the unit (the default is Auto Negotiation)

Ethernet Port Connection Problems

The Ethernet Integrity Indicator (the yellowLED embedded in the Ethernet connector)is off, and/or the Ethernet Activity Indicator(the green embedded LED) does not blinkwhen there should be traffic on the Ethernet Port.

The unit does not respond to ping.

* If the IP parameters of the unit are unknown, use the Set Factory Defaults utility to restore the default factory configuration of all parameters (except to Passwords, general FTP parameters and AU’s Frequency). The IP address of the unit after setting to factory defaults is 10.0.0.1.

ANG -Wireless


Slide title 40 pt


Text 24 pt



Problem and Indication Possible Cause Corrective Action

Wrong configuration

Check proper configuration of basic parameters:> ESSID> Sub-band and frequencies subset> Best AU parameters> ATPC Option> Transmit Power> Maximum Transmit Power> Antenna Gain> Security parameters: AuthenticationAlgorithm, and Default Key. If necessary-use Promiscuous Mode in AU.

Access is denied by AU(BTS)

Verify that the SU is not included in MAC Address Deny List of the AU.

Link quality is too low

> Verify that unit is in coverage area of AU(BTS)according to radio planning.> Verify that antenna is directed toward the AU(BTS)> Try to improve location/height of antenna.

SU Association Problems

SU does not associate with AU(BTS)

ANG -Wireless

unlicensed wimax

Documents