updated: jan 25, 2017 - asit
TRANSCRIPT
ZTE ZXR10 8900E Series Switch Data Sheet
Updated: Jan 25, 2017
Product Overview
The ZXR10 8900E Series switch is high-end modular carrier-grade switch featuring big switching
capacity, L2/L3/MPLS service capability, high-performance, superior reliability and enhanced
security. The ZXR10 8900E Series switch is designed for core and aggregation layer of
next-generation carrier aggregation scenario. The ZXR10 8900E Series switch allows fast,
non-blocking switching and has full IPv6 features. In addition, The ZXR10 8900E Series switch
offers a variety of technologies to fulfill better reliability, easy maintenance and low power
consumption: VSC2.0 (Virtual Switch Cluster), BFD (Bi-directional Forwarding Detection),
Zero-touch provisioning, IEEE 802.3az Energy Efficient Ethernet (EEE) etc, which help customer
to build future-oriented low TCO(Total Cost of Ownership) networks.
The ZXR10 8900E Series switch uses advanced hardware architecture and modular design, up to
10.24Tbps wire-speed switching capacity with high capacity service cards including: 48 x10GE
interfaces, 8 x 40GE interfaces, and 4 x100GE interfaces.
Coupled with distributed ROSng Software Platform, the ZXR10 8900E Series switch delivers the
following products:
8902E: 2 interface board slots, 2 control board slots and 2 power supply module slots. 4RU,
side-to-side airflow.
8905E: 5 interface board slots, 2 control switching slots and 3 power module slots. 10RU,
side-to-side airflow.
8908E: 8 interface board slots, 2 control switching slots and 3 power module slots. 13RU,
side-to-side airflow.
8902E 8905E 8908E 8912E 8908E-H 8912E-H
8912E: 12 interface board slots, 2 control switching slots and 3 power module slots. 17RU,
side-to-side airflow.
8908E-H: 8 interface board slots, 2 control board slots, 4 independent switching fabric board
slots and 3 power module slots. 17RU, side-to-side airflow.
8912E-H: 12 interface board slots, 2 control board slots, 4 independent switching fabric board
slots and 3 power module slots. 21RU, side-to-side airflow.
Product Features
Up to 10.24Tbps Wire-speed Switching Capacity, 4 x 100GE/ 48 x 10GE Interface Card
The ZXR10 8900E Series switch supports up to 10.24Tbps wire-speed switching
capacity with up to 1.28Tbps switching capacity per slot. It can deliver customer a
sustainable high-performance campus core and aggregation network and carrier
aggregation network for next 5 years.
The ZXR10 8900E Series switch line cards covers diverse Ethernet interfaces including:
FE/GE/10GE/ 40GE/100GE.The high capacity line cards such as 48 ports wire-speed
10GE, 8 ports wire-speed 40GE and 4 ports wire-speed 100GE can bring customers
with infinite bandwidth capability. Meanwhile, in the scenario that only need a few 10GE
and GE interfaces, the 10GE and GE interface mixed line card can be deployed in order
to help customer increase the line card usage and save investment.
Innovative Virtual Switch Cluster 2.0 (VSC2.0) Technology
VSC2.0 Capability: Stacking bandwidth between the VSC switches can be up to
320Gbps, which can solve the bandwidth bottleneck of VSC and deliver customer a
real-time non-blocking VSC system. By using optical Ethernet interface for stacking, the
stacking distance can be up to 80km and even more, it helps customer to get rid of
distance restriction while designing a reliable VSC system.
Reliability: Independent out-band management makes the control plane and forwarding
plane separated. Through real-time control information hot-standby technology, the VSC
system can achieve seamless switchover when failure happens.
Saving investments: No need special stacking line card, the normal line card can be
used for VSC connecting. When some interfaces are used for VSC, the other interfaces
on this line card can also be used for traffic forwarding. No interfaces are wasted and
that helps customer to save investments.
Flexibility: Master and slave in VSC2.0 works in 1+N redundancy mode, MAD
(Multi-active Detect) technology is used to detect and avoid dual master in VSC system
when failure happens. Together with real-time hot-standby and seamless switchover it
brings customer a more flexible VSC network.
Powerful Service Bearing Capability
By supporting rich L2 switching and L3 routing functions and low latency forwarding, The
ZXR10 8900E Series switch can bear lots of service including WLAN, Internet, Voice,
Video, Enterprise private network and other data services.
Support distributed L2/L3 MPLS VPN; support VPLS, H-VPLS and VPWS. The ZXR10
8900E Series switch can also support MCE. By supporting these features, it delivers
customer VPN service capability.
Support comprehensive L2/L3 Multicast protocols; support PIM-SM, PIM-DM, PIM-SSM,
MLD and IGMP Snooping, fulfill the requirements for IPTV, multi-terminal high-definition
video surveillance and video conferencing services.
Support POE/POE+ interface card, which delivers customer more flexible service access
choice.
Comprehensive IPv6 Solution
The ZXR10 8900E Series switch has passed IPv6 Ready Phase 2 Gold Medal
Certification issued by IPv6 Forum.
Support rich IPv6 unicast routing protocols: IPv6 static routing, RIPng, OSPFv3, IS-ISv6,
and BGP4+ and multicast features: MLD v1/v2, MLD snooping, PIMv6, etc.
IPv6-based equipment management.
manual tunnel
BGP4+
Support rich IPv4-to-IPv6 tunnel technologies: IPv6 manual tunnels, 6-to-4 tunnel,
ISATAP tunnel and IPv4-compatible automatic tunnel, etc.
Carrier-Class Reliability, Multi-Dimensional Security
Control plane and forwarding plane are physically separated on the ZXR10 8900E-H
Series switch.
All the key components of the ZXR10 8900E Series switch are redundant design and hot
pluggable, including: main control boards, switching boards, power supply modules, fan
modules.
Support GR (Graceful Restart) to realize non-stop forwarding for OSFP/BGP/IS-IS to
reduce the affection brought by network failures.
Support Ethernet OAM, including IEEE 802.3ah, 802.1ag, and help to monitor network
real-time operating status and fulfill fast fault detection, fault location.
Support various authentication methods such as 802.1x, Radius, TACACS+. Support
CPU overload protection, anti-DDOS, deliver customer a security network.
Easy Maintenance, Saving OPEX
Support independent monitoring plane, which can monitor the working temperature, fan
situation, power situation, etc. It can help customer hold the network running status in
real time.
Support Zero-touch provisioning, the software and the configuration files can be loaded
automatically, Reduce provision process and man power requirement.
Support the SQA (Service Quality Analyzer), detecting the network quality periodically or
in real time. In order to provide better quality of service for more valuable services.
Green for More
Support IEEE 802.3az EEE (Energy Efficient Ethernet), via chip-grade power
management, interfaces and line card can automatically sleep when no traffic.
Side-to-side shoot-through airflow increases the heat dissipation efficiency. Save up to12%
overall power consumption.
The fan rotational speed can be automatically and manually adjusted by 5 levels in
accordance with the temperatures inside the switch. It not only saves the power
consumption, but also reduces the noise and extends the life cycle of fans.
Complying with ROHS, WEEE and ISO14001 certification, No plumbum (Pb) in not only
product materials but also the whole processing technic. Meanwhile, use re-cycles
degradable packing materials, practice green for more.
System Specification
Parameters 8902E 8905E 8908E 8912E 8908E-H 8912E-H
Height 4RU 10RU 13RU 17RU 17RU 21RU
Dimensions (H*W*D,mm)
175*442*
420
442*442*
446
575*442*
446
753*442*
446
753*442*
446
928*442*
446
Switching Capacity
960Gbps 4.8Tbps 7.68Tbps 7.68Tbps 10.24Tbps 10.24Tbps
Packet Forwarding
Rate
720Mpps 3,600Mpps 5,760Mpps 5,760Mpps 7,680Mpps 7,680Mpps
Number of Line Card
Slots 2 5 8 12 8 12
Number of Main Control
Slots 2 2 2 2 2 2
Number of Switching Card Slots
N/A N/A N/A N/A 4(3+1) 4(3+1)
Interface Type
FE/GE RJ45; GE SFP; 10GE SFP+; 40GE CFP; 40GE QSFP+; 100GE CFP2
Weight <24kg <51.8kg <65.5kg <90.6kg <92.6kg <106.8kg
AC Power Supply
Rated input voltage range: 100V~240V,50Hz~60Hz
Max input voltage range: 90V~286V, 47Hz~63Hz
DC Power Supply
Rated input voltage: -48V/-60V
Input voltage range: -72V ~ -38V
Parameters 8902E 8905E 8908E 8912E 8908E-H 8912E-H
HVDC Power Supply
240V/336V
Power Consumption
<576W <1,235W <2,278W <3,217W <3,028W <3,369W
Power Redundancy
Pattern
AC/ DC: 1+1
AC/DC:2+1/1+1
Heat Dissipation
Pattern
Fan cooling,
independent fan subracks, Side-to-Side Airflow
Heat Dissipation
<1,611 BTU/h
<4,445 BTU/h
<6,373 BTU/h
<9,000 BTU/h
<8,471 BTU/h
<9,425 BTU/h
Working Temperature
Long term working temperature: -5oC ~ +45
oC;
Short term working temperature: -10oC ~ +55
oC;
Storage temperature
-40oC ~ +70
oC
Working Humidity
5%~95% (non-condensing)
Working Altitude
<3,000 meters
MTBF/MTTR >200,000 hours/ <30 minutes
Service Specification
Function The ZXR10 8900E Series Switch
L2 Features
Support IEEE 802.1p (COS), IEEE 802.1q (VLAN), IEEE 802.3x
Support IEEE 802.1d (STP)/ 802.1w (RSTP)/ 802.1s (MSTP)
Support IEEE 802.1ad (QinQ), Selective QinQ
Support IEEE 802.3ad (LACP), MC-LAG (Multi-Chassis Link Aggregation Group)
Support IEEE 802.3z (1000BASE-X) / 802.3ab (1000BaseT)
Support IEEE 802.3ae (10Gbase),
Support IEEE 802.3ba (40Gbase)
Support IEEE 802.3ba (100Gbase)
Support IEEE 802.3af (PoE), IEEE 802.3at (PoE+)
Support Port mirroring, Traffic mirroring
Support VLAN switching, VLAN translation
Support PVLAN, SuperVLAN
Support GVRP
Support LLDP
L3 Features
Support IPv4 routing protocols, such as static routing, policy based routing , RIP, OSPF,
BGP, and IS-IS
Support DHCP server/ relay/proxy, DHCP snooping
Support IPv6 dynamic routing protocols, such as Static routing, Policy based routing ,
RIPng, OSPFv3, ISISv6, and BGP4+
Support ND, DHCPv6, PMTU
Support manual IPv6 tunnel, 6to4 tunnel, 6PE, ISATAP tunnel
Multicast
Support IGMP v1/v2/v3, IGMPv1/v2/v3 snooping
Support PIM-SM, PIM-DM, PIM-SSM, MSDP, MBGP, Any-RP
Support administratively scoped multicast/ IPTV, MVR,
Support MLD V1/V2、MLD V1/V2 Snooping
Support PIMv6
MPLS
Support basic MPLS functions, LDP
Support MCE
Support VPLS,VPWS, H-VPLS
Support MPLS L2 VPN, MPLS L3 VPN
QOS
Support traffic classification based on Layer 2 headers, Layer 3 protocols, Layer 4
protocols, and 802.1p priority
Support queue scheduling algorithms, such as SP, WRR, DWRR, SP+WRR
Support congestion avoidance mechanisms, such as WRED and tail drop
Support policing/shaping based on port/flow
Support priority tag, rewriting and mapping based on 802.1p and IP DSCP. Each
port supports 8 hardware queues
Security
Support L2-L4 ACL
Support Ingress/ Egress ACL
Support 802.1x authentication and 802.1x server
Support MAC authentication
Support AAA/ RADIUS and TACACS+ authentication for login users
Support SSH v1.0/v2.0 server
Support CPU anti-attack, CPU overload protection,
Support STP Root Guard, BPDU guard,
Support URPF
Support RIP/OSPF/BGP MD5 encryption checking
MACsec
Equipment management
Support CLI, Telnet, SSH, Local and remote (Radius/Tacacs+) authentication of user
Support SNMP v1/v2/v3
Support RMON
Support NTP
Support Syslog, Sflow
Reliability
Support VSC2.0(Virtual Switch Cluster)
Support 1+1/2+1 Redundant Control module/Power supply/Fan module
Support 3+1 redundancy switching boards (Only 8900E-H)
Support Hot plugging
Support LACP , MC-LAG
Support ZESR/ZESR+ (ZTE Ethernet Switch Ring)
Support VRRP,VRRPv3,VRRPE
Support NSF/GR for OSFP/BGP/IS-IS
Support BFD for VRRP/ BGP/ IS-IS/ OSPF
Support Ethernet OAM (802.1ag and 802.3ah)
EMC:
FCC Part 15 (CFR 47) Class A
EN 55022 Class A
EN 300 386 V1.3.1
EN55024
ICES-003 Class A
Safety:
UL 60950 3rd Edition
CSA C22.2 No. 60950 3rd Edition
IEC 6095
EN 60950
EN60825-1+A1 and EN60825-2
Enhanced Features
Support Zero-touch provisioning
Support OpenFlow 1.3
Application Scenario
Aggregation in Carrier Network
The ZXR10 8900E Series switch can be used in the next-generation carrier aggregation scenarios
as the core/aggregation layer devices. The ZXR10 8900E Series switch supports powerful service
capability such as L2/L3/MPLS, IPv6, POE, which provides 100GE, 40GE, high-density 10GE
interfaces and fulfills the bearing requirements of WLAN, Voice, Video, Surveillance etc. It can be
used to build the high-reliability, extendable, secure, manageable data switching network to
provide the comprehensive product solution.
Order Information
Chassis
RS-8902E-CHS 8902E assembly chassis
8905E-CHS2-AC 8905E AC assembly chassis
8905E-CHS2-DC 8905E DC assembly chassis
8908E-CHS2-AC 8908E AC assembly chassis
8908E-CHS2-DC 8908E DC assembly chassis
8912E-CHS2-AC 8912E AC assembly chassis
8912E-CHS2-DC 8912E DC assembly chassis
8908E-H-CHS-AC 8908E-H AC assembly chassis
8908E-H-CHS-DC 8908E-H DC assembly chassis
8912E-H-CHS-AC 8912E-H AC assembly chassis
8912E-H-CHS-DC 8912E-H DC assembly chassis
Control Switching Board
8902EMCS1A 8902E 1A type control switching board
8902EMCS1D 8902E 1D type control switching board (clock)
8905EMCS1A 8905E 1A type control switching board
8905EMCS1D 8905E 1D type control switching board (clock)
8905EMCS3A 8905E 3A type control switching board
8905EMCS3E 8905E 3E type control switching board
8908EMCS1A 8908E 1A type control switching board
8908EMCS1D 8908E 1D type control switching board (clock)
8908EMCS3A 8908E 3A type control switching board
8908EMCS3E 8908E 3E type control switching board
8912EMCS1A 8912E 1A type control switching board
8912EMCS1D 8912E 1D type control switching board (clock)
8912EMCS3A 8912E 3A type control switching board
8912EMCS3E 8902E 3E type control switching board
Main Control Board
8900EHMCUA 8900E-H main control board
Switching Fabric Board
8900EHSFU3A 8900E-H 3A switching fabric board
8900EHSFU3E 8900E-H 3E switching fabric board
Power Supply Module
8902E-ACPWA 8902E AC power supply module
8902E-DCPWA 8902E DC power supply module
8900E-ACPWA 8905E/8908E/8912E/8908E-H/8912E-H AC power supply module
8900E-DCPWA 8905E/8908E/8912E/8908E-H/8912E-H DC power supply module
Fan Supply Module
8902E-FAN 8902E fan subracks
8905E-FAN 8905E fan subracks
8908E-FAN 8908E fan subracks
8912E-FAN 8912E fan subracks
8908E-H-FAN 8908E-H fan subracks
8912E-H-FAN 8912E-H fan subracks
100M/1000M Ethernet electrical interface cards
Board/Card Model Fixed Interface Line Processing
Board Name Features
S1GT24A 24-port 10/100/1000 BASE-T
interface card (S1, RJ45)
L2/L3 features, IPv4/v6 features,
MPLS, and intelligent monitoring
are supported
S1GT48A 48-port 10/100/1000 BASE-T
interface card (S1, RJ45)
L2/L3 features, IPv4/v6 features,
MPLS, and intelligent monitoring
are supported
S1GP48A
48-port 10/100/1000 BASE-T
interface card (S1, RJ45,
POE/POE+)
Provides users with 1000BASE-T services Supports Power over Ethernet (PoE) on all ports Supports wire-speed MPLS GE access
H1GT48A 48-port 10/100/1000 BASE-T
interface card (H1, RJ45)
L2/L3 features, IPv4/v6 features,
and intelligent monitoring are
supported.
H2GT48D 48-port 10/100/1000 BASE-T
interface card (H2, RJ45)
MPLS, large entries, Ethernet
OAM, clock (SyncE or 1588v2),
and intelligent monitoring are
supported.
100M/1000M Ethernet optical interface cards
Board/Card Model Fixed Interface Line Processing
Board Name Features
S1GF24A 24-port 100/1000 BASE-X interface
card (S1, SFP)
L2/L3 features, IPv4/v6 features,
MPLS, and intelligent monitoring
are supported.
S1GF48A 48-port 100/1000 BASE-X interface
card (S1, SFP)
L2/L3 features, IPv4/v6 features,
MPLS, and intelligent monitoring
are supported.
H1GF24A 24-port 100/1000 BASE-X interface
card (H1, SFP)
L2/L3 features, IPv4/v6 features,
and intelligent monitoring are
supported.
H1GF48A 48-port 100/1000 BASE-X interface
card (H1, SFP)
L2/L3 features, IPv4/v6 features,
and intelligent monitoring are
supported.
H2GF24D 24-port 100/1000 BASE-X interface
card (H2, SFP)
MPLS, large entries, Ethernet
OAM, clock (SyncE or 1588v2),
and intelligent monitoring are
supported.
H2GF48D 48-port 100/1000 BASE-X interface
card (H2, SFP)
MPLS, large entries, Ethernet
OAM, clock (SyncE or 1588v2),
and intelligent monitoring are
supported.
10GE Ethernet optical interface cards
Board/Card Model Fixed Interface Line Processing
Board Name Features
S1XF12A 12-port 10G BASE-X interface card
(S1, SFP+)
L2/L3 features, IPv4/v6 features,
and intelligent monitoring are
supported.
S2XF48A 48-port 10G BASE-X interface card
(S2, SFP+)
L2/L3 features, IPv4/v6 features,
Ethernet OAM, and intelligent
monitoring are supported.
H1XF2A 2-port 10G BASE-X interface card
(H1, SFP+)
L2/L3 features, IPv4/v6 features,
MPLS, and intelligent monitoring
are supported.
H1XF4A 4-port 10G BASE-X interface card
(H1, SFP+)
L2/L3 features, IPv4/v6 features,
MPLS, and intelligent monitoring
are supported.
H1XF8A 8-port 10G BASE-X interface card
(H1, SFP+)
L2/L3 features, IPv4/v6 features,
MPLS, and intelligent monitoring
are supported.
H1XF16A 16-port 10G BASE-X interface card
(H1, SFP+)
L2/L3 features, IPv4/v6 features,
MPLS, and intelligent monitoring
are supported.
H1XF32A 32-port 10G BASE-X interface card
(H1, SFP+)
L2/L3 features, IPv4/v6 features,
MPLS, and intelligent monitoring
are supported.
H2XF8D 8-port 10G BASE-X interface card
(H2, SFP+)
MPLS, large entries, Ethernet
OAM, clock (SyncE or 1588v2),
and intelligent monitoring are
supported.
H2XF48C 48-port 10G BASE-X interface card
(H2, SFP+)
MPLS, large entries, Ethernet
OAM, clock (SyncE or 1588v2),
and intelligent monitoring are
supported.
H3XF12D 12-port 10G BASE-X interface card
(H3, SFP+)
MPLS, large-size table entries,
Ethernet OAM, clock (SyncE or
1588v2), and intelligent
monitoring are supported.
10 GE and GE optical interface cards
H1GF28C12X2C 2-port 10GE BASE-X and 28-port GE BASE-X (12-port Combo) interface
card (H1,SFP+/SFP/RJ45)
H1GF28C12X4C 4-port 10GE BASE-X and 28-port GE BASE-X (12-port Combo) interface
card (H1,SFP+/SFP/RJ45)
H2GF24C12X2C 2-port 10GE BASE-X and 24-port GE BASE-X (12-port Combo) interface
card (H2,SFP+/SFP/RJ45)
H2GF24C12X4C 4-port 10GE BASE-X and 24-port GE BASE-X (12-port Combo) interface
card (H2,SFP+/SFP/RJ45)
40GE Ethernet optical interface cards
Board/Card Model Fixed Interface Line Processing
Board Name Features
S2LQ6L2A 8-port 40GE BASE-X interface card
(S2, 2 port CFP, 6 port QSFP+)
MPLS, 40–gigabit optical
interface line speed access,
Ethernet OAM, and intelligent
monitoring are supported.
100GE Ethernet optical interface cards
H2UC2C 2-port 100GE BASE-X interface card (H2, 2 port CFP2)
H2UC4C 4-port 100GE BASE-X interface card (H2, 2 port CFP2)
10GE WAN optical interface cards
H1XW4B 4-port 10G BASE-X interface card (H1, SFP+)
Software
R8900E-SW-BASIC 8900E Basic System Software
R8900E-SWUD 8900E Basic System Software Upgrade
SWLIC-MPLS 8900E MPLS Software Service
Optical and Electrical Interface
Interface Description
10 /100 /1000BASE-T
In compliance with IEEE802.3z
RJ45 connector
Category 5 UTP cable, maximum transmission distance: 100 m
Half or full duplex, MDI/MDIX
100BASE-FX (SFP-M02K)
LC connector, connected with a multi-mode optical fiber, optical
wavelength: 1310 nm, maximum transmission distance: 2 km
Transmission power: -19 dBm to -14 dBm, receiving sensitivity: <
-30 dBm
100BASE-FX (SFP-S15K)
SFP optical module
LC connector, connected with a single-mode optical fiber, optical
wavelength: 1310 nm, maximum transmission distance: 15 km
Transmission power: -14 dBm to -8 dBm, receiving sensitivity: <
-31 dBm
100BASE-FX (SFP-S40K)
LC connector, connected with a single-mode optical fiber, optical
wavelength: 1310 nm, maximum transmission distance: 40 km
Transmission power: -4 dBm to -0 dBm, receiving sensitivity: < -37
dBm
100BASE-FX (SFP-S80K)
LC connector, connected with a single-mode optical fiber, optical
wavelength: 1550 nm, maximum transmission distance: 80 km
Transmission power: -3 dBm to +3 dBm, receiving sensitivity: <
-37 dBm
Interface Description
1000BASE-SX (SFP-M500)
LC connector, connected with a single-mode optical fiber, optical
wavelength: 850 nm, maximum transmission distance: 500 m
Transmission power: -9.5 dBm to 4 dBm, receiving sensitivity: <
-17 dBm
1000BASE-LX (SFP-S10K)
LC connector, connected with a single-mode optical fiber, optical
wavelength: 1310 nm, maximum transmission distance: 10 km
Transmission power: -9 dBm to 3 dBm, receiving sensitivity: < -20
dBm
1000BASE-LX (SFP-S40K)
LC connector, connected with a single-mode optical fiber, optical
wavelength: 1310 nm, maximum transmission distance: 40 km
Transmission power: -4.5 dBm to 5 dBm, receiving sensitivity: <
-22 dBm
1000BASE-LX(SFP-S40K-1550)
LC connector, connected with a single-mode optical fiber, optical
wavelength: 1550 nm, maximum transmission distance: 40 km
Transmission power: -5 dBm to 0 dBm, receiving sensitivity: < -22
dBm
1000BASE-LH (SFP-S80K)
LC connector, connected with a single-mode optical fiber, optical
wavelength: 1550 nm, maximum transmission distance: 80 km
Transmission power: 0 dBm to 3 dBm, receiving sensitivity: < -22
dBm
1000BASE-LH (SFP-S120K)
LC connector, connected with a single-mode optical fiber, optical
wavelength: 1550 nm, maximum transmission distance: 120 km
Transmission power: 0 dBm to 5 dBm, receiving sensitivity: < -30
dBm
10GBASE-SR (SFP+-M300)
LC connector, connected with a multi-mode optical fiber, optical
wavelength: 850 nm, maximum transmission distance: 300 m
Transmission power: -7.3 dBm to -1.0 dBm, receiving sensitivity: <
-1 1.1 dBm
10GBASE-LR (SFP+-S10K)
LC connector, connected with a single-mode optical fiber, optical
wavelength: 1310 nm, maximum transmission distance: 10 km
Transmission power: -8.2 dBm to 0.5 dBm, receiving sensitivity: <
Interface Description
-10.3 dBm
10GBASE-ER/EW
(SFP+-S40K)
LC connector, connected with a single-mode optical fiber, optical
wavelength: 1550 nm, maximum transmission distance: 40 km
Transmission power: -4.7 dBm to 4.0 dBm, receiving sensitivity: <
-14.1 dBm
40GBASE-SR4 (QSFP+300)
40G QSFP optical transceivers
Wavelength:850nm
Max. transmission distance: 300m
Transmission power: -7.0dBm~+2.3dBm.
Receive sensitivity: <-5.4dBm
40GBASE-LR4
(CFP+-S10K-D)
40G CFP optical transceivers
Wavelength: 1270nm,1290nm,1310nm,1330nm
Max. transmission distance: 10Km
Transmission power: -7.0dBm~2.3dBm.
Receive sensitivity: <-1 1.5dBm
NO. 55, Hi-tech Road South,ShenZhen,P. R. China Postcode: 518057 Web: www.zte.com Tel: +86-755-26770000 Fax: +86-755-26771999