upgrade to netweaver bw 7.3x - new features with abap upgrade to 7.3x and 7.31 (ehp 1 for 7.3x).30 -...
TRANSCRIPT
Upgrade to NetWeaver BW 7.3x
New features with ABAP Upgrade
to 7.3x and 7.31 (EhP 1 for 7.3x)
Roland Kramer, Product/Solution Management BW/In-Memory
April 2012
© SAP AG 2009. All rights reserved. / Page 2
Agenda
1. Technology/Roadmap facts
2. What’s new with the Upgrade to BW 7.3x
3. Usage of the ASU toolbox for BW
4. General checks prior to the Upgrade
5. Details of the Upgrade Process
© SAP AG 2009. All rights reserved. / Page 3
Evolving In-Memory Footprint in SAP
NetWeaver BW 7.3x and 7.31
Planning Engine
Data Manager
InfoCubes
DataStore Objects
Analytic Engine
Data Persistency
and Runtime
Data
Modeling
Ente
rprise D
ata
Ware
house a
nd D
ata
Mart
Modelin
g w
ith S
AP
NetW
eaver
BW
BWA instead of
aggregates
Filter +
aggregation
BWA-only
InfoCubes
BWA reporting
for DSOs
In-Memory
optimized
DataStore Objects
In-memory
planning engine
First calculation
scenarios in BWA
Additional
calculations
in-memory
MultiProvider
handling and
flexible joins
BW 7.0
DB + BWA 7.0
BW 7.3
DB + BWA 7.2 Planned: BW 7.3 on HANA
SP5 and beyond
EDW Processes
In-Memory
optimized
InfoCubes
Consumption of
HANA models in
BW
HANA data for
BW Staging
This presentation outlines our general product direction and should not be relied on in making a purchase decision. This presentation is not subject to your license agreement or any other agreement with SAP. SAP has no obligation to pursue any course of business outlined in this presentation or to develop or release any functionality mentioned in this presentation. This presentation and SAP's strategy and possible future developments are subject to change and may be changed by SAP at any time for any reason without notice. This document is provided without a warranty of any kind, ei ther express or implied, including but not limited to, the implied warranties of
merchantability, fitness for a particular purpose, or non-infringement. SAP assumes no responsibility for errors or omissions in this document, except if such damages were caused by SAP intentionally or grossly negligent.
© SAP AG 2009. All rights reserved. / Page 4
BW 7.3x - Executive Summary
Enhanced Scalability & Performance for faster decision making
Remarkably accelerated data loads
Next level of performance for BW Accelerator
Increased flexibility through SAP BusinessObjects BI and EIM integration
Tighter integration with SAP BusinessObjects Data Services
Enhanced integration with SAP BusinessObjects Metadata Management
Reduced TCO and improved development efficiency
Automated creation of Semantic Partitioned Objects
Graphical data flow modeling and best practice data modeling patterns
Simplified configuration and operational management
Admin Cockpit integrated into SAP Solution Manager
Wizard based system configuration
Major benefits of SAP NetWeaver BW 7.3 are:
This presentation and SAP's strategy and possible future developments are subject to change and may be changed by SAP at any time for any reason without notice. This document is
provided without a warranty of any kind, either express or implied, including but not limited to, the implied warranties of
merchantability, fitness for a particular purpose, or non-infringement.
Important timelines NetWeaver 7.3x including BW is GA
since 30th of MAY 2011!
© SAP AG 2009. All rights reserved. / Page 5
Upgrade to BW 7.3x - ABAP
NetWeaver Java 7.3x is now shipped together with BW 7.3x. Mandatory you should separate
the Java Stack prior to the Upgrade of the ABAP Backend, if not already done.
The new split/deinstallation tool for the Java Stack is expected to be available November
2011. If you are already in the process, consider the manual deinstallation of the Java Add-In
until it’s availability.
The BICS are moving to the upcoming SAP BusinessObjects Application Platform BI 4.x,
which is also a prerequisite for the full usage of the BEx successor - Analysis -
The Java component BW-IP modeler is redeveloped for BW 7.3x in ABAP HTTP, so the Java
Server will not be used anymore for the BW-IP infrastructure in the future after BW 7.3x
The new BI Authorization concept is now mandantory. Despite the fact that you either create a
7.0x System beforehand to migrate the old BW Authorization, a potential Upgrade from BW
3.5 to 7.3x would be possible.
NetWeaver 7.0 EhP3 is merged into NetWeaver 7.3x EhP1 (there is no 7.03, only 7.31).
All Components are using one consolidated Version of the Kernel (7.20 Unicode-EXT 64-BIT).
For compability reasons there are non UC/non EXT Versions available (no 32-BIT anymore)
The full (currently only limited by size of the DB) BW on HANA Support is available
with 7.30 SP07 and 7.31 SP04
Note 1641432 - SAP Product Master Releases
Some technology facts and updates
© SAP AG 2009. All rights reserved. / Page 6
Solution Manager pre requisites
incorrect stack.xml can create unwanted follow up errors
In order to successfully work with the Solution Manager to create necessary
stack.xml, which is a new requirement in NetWeaver based upgrades the following
checks had to be fullfilled prio to the cration of the stack.xml.
■ Suffient privelidges for the s-user, which is connected to the Service Market Place (SMP)
■ Updated PPMS data, to ensure the correct processing of the desired Upgrade Target‘s
■ Latest SP‘s/correction/Notes for the correct usage of the Solution Manager applications
For more information about the Maintenance Optimizer, see SAP Support Portal at
■ http://service.sap.com/solman-mopz
Furthermore if you have ERP components installed, eg. the SEM Add-On, consider
■ Note 1326576 - SAP NetWeaver Systems Containing SAP ERP Software Components
■ For NetWeaver 7.01/SEM 6.04 you cannot add ERP components together with NetWeaver
■ From NetWeaver 7.02/SEM 6.05 you must define the System as ERP EhP5 and select FINBASIS
and SEM-BW
© SAP AG 2009. All rights reserved. / Page 7
Upgrade to BW 7.3x - ABAP
Note 1532805 - Add-On Compatibility of SAP NetWeaver 7.3
There is a SEM Add-On (only for the Upgrade) available with BW 7.30. The SEM (6.34) Add-
On is available since end of Q1/2011 for all Customers. See Notes 1539356 and 1531022 for
more details. SEM 6.34 cannot be installed on a fresh BW 7.30 Installation
SEM 6.34 is HANA enabled, see Note 1648413 for more Details.
The direct update from BW 7.0/SEM 6.0 to BW 7.31/SEM 7.36 is possible (Note 1326576)
An Upgrade to NetWeaver 7.31 (7.3x EhP1 equal with 7.0 EhP3) is possible, when SP02 or
higher is available for 7.31 and the equivalent SP for SEM 7.36.
This Combination is currently in Rampup (November 2011) and will run until End of May 2012
There is also the BPC 10.0 Add-On available with BW 7.30 which is currently in Rampup
(GA expected for November 2011). With NetWeaver Version there is no Windows Server
necessary anymore (web based maintenance). See Notes 1585589 and 1620027 for details.
It is planned with SP06 (CPMBPC 800) to be HANA enabled
Additional Add-On´s like GRC or DMIS will be enabled for the Upgrade to NetWeaver 7.31
Decision about installed Add-On´s
© SAP AG 2009. All rights reserved. / Page 8
Upgrade to BW 7.3x - ABAP
SEM Add-On Implications
BW 7.3/SEM 6.34
(specific case for EhP4)
Upgrade to
NetWeaver 7.31
SEM 7.36
possible!
Choose your NetWeaver BW Start Release
BW 7.01/SEM 6.04
(specific case for EhP4)
Upgrade to
NetWeaver 7.3
SEM 6.34
possible!
BW 7.0x/SEM 6.0x
(generic EhP approach)
Upgrade to
NetWeaver 7.03/7.31*
SEM 7.36
possible!
(Note 1326576)
Consider Options in Notes 1539356 (7.30), 1681435 (7.31) and 1531022 (SEM)
* technically BW 7.31 with label NW 7.03 for product version; see Note 1681435
Additional option: Upgrade BW 7.02/SEM 6.05 to BSi2011/BW 7.31/SEM 7.36 possible
(via Rampup SAP Business Suite 7 Innovations 2011 since November 2011)
BW 7.0/SEM 6.0
(EhPs except EhP4)
Upgrade to
NetWeaver 7.3
SEM 6.34
Not possible
directly (only via
BW 7.01/SEM 6.04)!
© SAP AG 2009. All rights reserved. / Page 9
New BI 4.0 Installation for SAP BW Customers
Platform View - Proposal
SAP BW 7.0
Physical Server
(optional)
SAP NetWeaver
SAP NetWeaver
Functions
J2EE 7.0
ABAP 7.0
SAP Usage Type and
SAP BusinessObjects
Tiers, Apps, Services
The XI 3.1/BI 4.0 Java apps can deployed either on an existing SAP J2EE 7.0x or 7.3x Engine, or ideally
capsulated with BI with Tomcat. Consider the SAPJVM 4.1. A JVM switch tool is available as well
SAP BW 7.01
J2EE 7.01
BEx Web
BICS
EP
ABAP 7.01
Split
J2EE 7.3x
BEx Web
BICS
EP (opt)
SAP BW 7.3x
ABAP 7.3x
BI Java
EP
BI Java
EP
BI Java EP
LCM Client BI Launch Pad
… (*)
BI 4.x
BI Reporting & Infrastructure Services
BI Web Apps
BI Web Tier
BO XI 3.1
BOE XI Web Tier
XI Reporting & Infrastruc. Services Migr.
© SAP AG 2009. All rights reserved. / Page 10
J2EE Options for BI 4.0 together with BW 7.3x
use the recommendation with the BI 4.0 inbuilt Java Server
BI 4.0
SAP NetWeaver J2EE
7.3x
Other J2EE
(see PAM)
BI 4.0
BICS
BEx Web
BI 4.0 SP? Only
BICS
BEx Web
BI 4.0 SP?
Usage Type EP
Usage Type BI Java
(BICS, BEx Web)
BEx Web Limitations*
- No Broadcasting (Portal/KM)
- No Documents (Portal/KM)
- No Xcelsius BW Connection
Install Upgrade from BW 7.0x Install
BEx Web Limitations*
- No Broadcasting (Portal/KM)
- No Documents (Portal/KM)
- No Xcelsius BW Connection
*Broadcasting is either a direct ABAP process (Excel) or an ABAP HTTP process publishing in a separate SAP EP
Distinguish between 3.x and 7.x Web templates. 3.x Web template to not require BI - JAVA 7.x
© SAP AG 2009. All rights reserved. / Page 11
Single ABAP 7.0x Stack
Doublestack Options prior to the Upgrade BW 7.3x
separation of ABAP and JAVA easies the upgrade process
BW 7.0x Doublestack
Deinstall JAVA Add-In Use Split tool
Upgrade
to JAVA 7.3x*
Upgrade
to BW 7.3x ABAP
Fresh Install of
JAVA 7.3x (without ADS)
BW 7.3x
ABAP Stack
NetWeaver 7.3x
JAVA Stack (with ADS) JAVA 7.3x Upgrade limitation*
- no automatic file system 7.x
- no automatic SAPCryptoLib
- disable SNC configuration ADS = Adobe Document Services (obsolete with NetWeaver 7.3x BI-Java)
Deinstall JAVA 7.0x Stack Deinstall JAVA 7.0x Stack
© SAP AG 2009. All rights reserved. / Page 12
SAP Business Intelligence Architecture 2011
Choose the suitable combination
BW 7.3x Upgrade JAVA fresh Install
(Not the central EP) BI 4.x Upgrade/fresh
BW 3.5
BW 7.0
BW 7.0x
Depended from
SEM Add-On and
Analysis Authorizations
Deinstall/Split Java Add-In
Deinstall JAVA Instance
BW 7.01 SP08
BW 7.0 (not recommended)
BW 3.5 (not recommended)
JAVA
7.0x
Add-On
or sep.
Install
Deinstall/Split Java Add-In
Deinstall JAVA Instance Fresh JAVA 7.3x Install
Upgrade/Migrate to BI 4.x
Fresh BI 4.x Install
Use BI 4.x In-Build JAVA
Application Server
XI 3.1
XI 3.1 SP04 Fresh JAVA 7.01 Install
Fresh JAVA 7.3x Install
Upgrade/Migrate to BI 4.x
Use BI 4.x In-Build JAVA
Application Server
© SAP AG 2009. All rights reserved. / Page 13
New authorization concept must be in place
Former and new authorization concept
■ It is mandatory to setup/migrate to the new concept prior to the upgrade
■ The former authorization concept is no longer supported with BW 7.3x
■ You cannot switch back to the former concept
■ New Transaction RSECADMIN, see SAP Notes 942799 and 944929
© SAP AG 2009. All rights reserved. / Page 14
Example Project schedule for the Migration
Combined technical Upgrade & Authorization Migration
Plan phase (6 weeks)
Upgrade
Authorizations
DEV system (4 weeks)
Upgrade & Test
Authorization migration
QAS system (5 weeks)
Upgrade & Test
Authorization Test
PRD system (1 weekend)
Upgrade & GoLive
Cutover & Golive
KickOff Legend: Duration Milestone
Start Upgrade
1st month 2nd month 3rd month 4th month 5th month <month>
GoLive
Remark
Overall project duration dependents on the system complexity.
Given example is based on a higher complexity.
To match with typical technical Upgrade Plan, start two month in advance.
© SAP AG 2009. All rights reserved. / Page 15
General Guidelines and Notes
EDW operations - landing page “one stop” http://www.sdn.sap.com/irj/sdn/edw-ops
NetWeaver BW 7.3 Online Help http://help.sap.com/saphelp_nw73/helpdata/en/ca/6fbd35746dbd2de10000009b38f889/frameset.htm
Useful Notes
Note 586648 - Invalid SID entries in /BI 0/SIOBJNM
Note 1022704 - Upgrade Phase EHP_INCLUSION und SPSTACK_REQUEST
Note 1088717 - Active services for Web Dynpro ABAP in transaction SICF
Note 1390477 - Additional info for upgrade to SAP NetWeaver 7.3 (using SUM)
Note 1403832 - Central Note: Upgrade Systems on SAP NetWeaver 7.3
Note 1539356 - Upgrade to NW 7.3 with SEM-BW, FINBASIS, SAP_BS_FND, WEBCUIF
Note 1405878 - SAP Solution Manager - Basic functions SP22 and higher
Note 1484437 - BI_CONT 7.35: Information about installation and upgrade
Note 1543092 - BI Administration Cockpit: Upgraded from 7.00 to 7.3x release
Note 1562522 - SAPINST aborts during central instance installation
Note 1603103 - SMSY: NetWeaver 7.3 upgrade
Note 1636053 - Upgrade to SAP NetWeaver 7.3x: BW server: Useful note
Note 1627683 - SCWB/SNOTE/SPAU: Changed development package
Note 1528990 - SP Equivalence for update/upgrade to SAP NW 7.3x
Note 1636841 - Version management: Compatibility with SAP BASIS 7.x0
© SAP AG 2009. All rights reserved. / Page 16
Agenda
1. Technology/Roadmap facts
2. What’s new with the Upgrade to BW 7.3x
3. Usage of the ASU toolbox for BW
4. General checks prior to the Upgrade
5. Details of the Upgrade Process
© SAP AG 2009. All rights reserved. / Page 17
SAP Upgrade Manager (SUM) 1.0
The SUM 1.0 is the frontend for all Upgrades now
© SAP AG 2009. All rights reserved. / Page 18
System Switch Upgrade
New upgrade directory now located at \\sapmnt\<SID>\upg
New with NetWeaver EhP1 onwards
© SAP AG 2009. All rights reserved. / Page 19
New Upgrade UI
following the EhP development guidelines
© SAP AG 2009. All rights reserved. / Page 20
New Upgrade UI
Providing the JCE Jurisdiction Policy Files beforehand
■ New Security Concept used:
See Notes 1240081 and 1238121
■ Start of SAPup
STARTUP „JCE_POLICY_ZIP = <jce policy zip file>"
If JCE_POLICY_ZIP already set in the Environment
you can directly use STARTUP without Parameter
© SAP AG 2009. All rights reserved. / Page 21
Put all components/patches/updates to one
directory and all Add-On„s as SAINT packages
■ All Add-On’s/Patches will be found automatically in the EPS inbox and all other files
in the download directory
■ Create your XML File for ABAP Support Packages in the MOPZ
© SAP AG 2009. All rights reserved. / Page 22
New Preconfiguration Modes available
Or manual selection see Upgrade Guide Page 46
© SAP AG 2009. All rights reserved. / Page 23
Upgrade Planning
working until Downtime is possible now
© SAP AG 2009. All rights reserved. / Page 24
Changeability of BW Objects during Upgrade
© SAP AG 2009. All rights reserved. / Page 25
Agenda
1. Technology/Roadmap facts
2. What’s new with the Upgrade to BW 7.3x
3. Usage of the ASU toolbox for BW
4. General checks prior to the Upgrade
5. Details of the Upgrade Process
© SAP AG 2009. All rights reserved. / Page 26
Accelerated Upgrade to NetWeaver BW 7.3x
Your single source for all pre and post upgrade steps
Use the predefined content for:
upgrade to NetWeaver 7.x BW
upgrade to ERP 6.0 EhPx (upcoming)
upgrade to any SAP Product based on
the NetWeaver 7.x Platform
create/modify own content (XML based)
Complete Business Suite 7
connectivity (with EhP1):
abap - java connection (available) for
connection BW-IP, EP, ESS/MSS, etc.
abap - abap (with EhP1) for backend
connection e.g. ERP, CRM, BW, PI, etc.
java - java (upcoming) for frontend
connection e.g. FPM, etc.
Note 1178800
Lower your TCO and time efforts
by Managing your Upgrade with innovative tools
1. ASU toolbox (incl. BW Content)
one single truth for all pre/post Upgrade Steps
(Note 1000009)
2. CTC for BW-Java
automatic connection between Abap and Java (Note 983156)
Check out the success story from the German Customer Karcher:
http://service.sap.com/~sapidp/011000358700000162292010E/
© SAP AG 2009. All rights reserved. / Page 27
Application Post
checks and functional
tests
Technical post Steps
and Go-Live
Preparation
Application testing
New 7.0 EDW features
Technical testing
BI-Java CTC and
testing of new 7.0
features
Application checks/
cleansing and
Upgrade Preparation
Technical checks and
Upgrade preparation
Agree on result
Last checks
PREPARE
UPGRADE
Pre Upgrade
Steps
PREPARE/
UPGRADE
Post Upgrade
Steps Testing
Upgrade Process with the ASU toolbox for BW
in average 3 days per systems
1 day 1 day 1 day 1 Week
Note: Elapsed time may be longer due to scheduling and lags, etc.
Key Highlights of the ASU toolbox for BW
One single source of all pre and post steps for a successful upgrade
Clear distribution of tasks between SAP Basis Administration and the Application Development
Additions, Remarks, Documentation can be added immediately as well
XML editor makes adoptions to other SAP upgrades easy.
© SAP AG 2009. All rights reserved. / Page 28
Typical Scenario for an Upgrade
See Details in SAP Note 1000009
SAP Solution Manager SAP UP SAP System
Start Upgrade RoadMap
Start ASU-Toolbox
before Upgrade Phase (download Content from SMP)
Start Prepare Running Prepare-Jobs
Running ASU-Reports via
Schedule Manager
Start technical Upgrade ASU-Toolbox
before Upgrade Phase finished
Prepare finished
Running technical Upgrade
Start ASU-Toolbox
after Upgrade Phase
Technical Upgrade finished
Running ASU-Reports via
Schedule Manager
ASU-Toolbox
after Upgrade Phase finished
Monitoring of all started
ASU-Reports via
Solution Manager
ASU-Upgrade-Note-Display
© SAP AG 2009. All rights reserved. / Page 29
Typical Upgrade Project Plan
typical duration 6-8 weeks for a 3-System Landscape
Start after first comp. Stack (3d/Sys)
3d
3d + 1w Test
Ongoing (several weeks)
Steps/Milestones
3d + 1w Test
3d
Start after first Upgrade (2d/Sys.)
2w
Upgrade Tasks
Upgrade Planning
Upgrade of Development
Additional testing
Setup of BWA or BW on HANA
Upgrade of Test
Upgrade of Production
SAP Java Server/EP
Go Live BWA or BW on HANA
today Legend: Duration Milestone 6 weeks 8 weeks
Time in total: 9d Upgrade, 10+d testing, 6d Java Inst, 9d het. Systemcopy, conversion IC/DSO individually, BW on HANA testing individually
© SAP AG 2009. All rights reserved. / Page 30
Pre Steps of ASU toolbox for BW - 1
© SAP AG 2009. All rights reserved. / Page 31
Post Steps of ASU toolbox for BW - 1
© SAP AG 2009. All rights reserved. / Page 32
ASU toolbox – BW specific
Install latest ST-PI 2008 Add-On (SP05)
XML can now be changed within the
same screen, e.g. new or changed
items/checks can be added immediate.
© SAP AG 2009. All rights reserved. / Page 33
Agenda
1. Technology/Roadmap facts
2. What’s new with the Upgrade to BW 7.3x
3. Usage of the ASU toolbox for BW
4. General checks prior to the Upgrade
5. Details of the Upgrade Process
© SAP AG 2009. All rights reserved. / Page 34
New with NetWeaver 7.0x Daemon process
Stop all Deamon Process with Transaction RSRDA
© SAP AG 2009. All rights reserved. / Page 35
Activate all DataStore Objects
Valid for all BW Releases 3.x and 7.0x
© SAP AG 2009. All rights reserved. / Page 36
Repair Inconsistent InfoPackages
Transaction RSBATCH
© SAP AG 2009. All rights reserved. / Page 37
Further general Upgrade Checks
SAP_DROP_TMPTABLES and RSUPGRCHECK
© SAP AG 2009. All rights reserved. / Page 38
Check the Secure Storage with SECSTORE
e.g. if System is a copy from Test/Production
© SAP AG 2009. All rights reserved. / Page 39
Transaction SECSTORE
© SAP AG 2009. All rights reserved. / Page 40
Check for missing TLIBG entries
New check from NetWeaver BW 7.0x onwards (Note 783308)
2EETG013 "Function group frame program" "CRM_BUPA_FRG0060_BAPI" "exists without TLIBG entry"
2EETG013 "Function group frame program" "LXE_SE63_Z_EDITOR" "exists without TLIBG entry"
proceed as follows:
1. TA: SE80
2. Select the 'Function Group' option from the dropdown menu
3. Enter: XXXXX
4. Follow the instructions.
5. Continue with the upgrade.
or run the report RSTLIBG to avoid these errors in the PREPARE beforehand.
© SAP AG 2009. All rights reserved. / Page 41
Check for wrong source systems assignments
Note 1564964 - Source system XYZ does not exist
use function module RSAR_LOGICAL_SYSTEM_DELETE in advance to remove old
source systems.
Note 1546842 - Message SY530 in the transport log RS_DTRF_AFTER_IMPORT
minimum start release for Upgrade 7.01 SP08 or higher (see also Note 1469150)
Note 1649901 - Time-critical processes in BW upgrade/Support Package import
table RSADMIN REPL_D_AFTER_IMPORT = X
to prevent long runtimes in upgrade step AIN_NEWBAS/XPRAS_AIMMRG.
In advance run report RS_LOGSYS_ACTIVATE before/after the upgrade
Note 1668456 - DTP: Fehlermeldung RSO851 bei Upgrade / Content-Installation
import prior to the upgrade to NetWeaver 7.3x, see also Note 1633805
Inconsistent source system can create long runtimes in XPRAs
© SAP AG 2009. All rights reserved. / Page 42
Usage of the SAP Solution Manager
Create the Stack XML File
Transaction SOLMAN_WORKCENTER
© SAP AG 2009. All rights reserved. / Page 43
Choose the Option Upgrade for your source system
Create the Stack XML File
© SAP AG 2009. All rights reserved. / Page 44
Create the Stack XML File
Choose the Option Maintenance for the Upgrade
© SAP AG 2009. All rights reserved. / Page 45
Create the Stack XML File
Confirm the Major Target
© SAP AG 2009. All rights reserved. / Page 46
Create the Stack XML File
The XML File is created and available for download or in the EPS inbox
© SAP AG 2009. All rights reserved. / Page 47
Agenda
1. Technology/Roadmap facts
2. What’s new with the Upgrade to BW 7.3x
3. Usage of the ASU toolbox for BW
4. General checks prior to the Upgrade
5. Details of the Upgrade Process
Please Note: Some of the screenshots might contain 7.20 as release, this has no impact on
the shown steps, as the technical Upgrade Procedure for 7.3x is the same.
© SAP AG 2009. All rights reserved. / Page 48
Upgrade UI – Start Page
http://<server>.<domain>.<ext>:4239
© SAP AG 2009. All rights reserved. / Page 49
SAP JVM location/environment variables
start DSUGui.bat separately, if the Web Browser is not working
© SAP AG 2009. All rights reserved. / Page 50
Upgrade UI
Details for Step Initialization
© SAP AG 2009. All rights reserved. / Page 51
Upgrade Password provided in Note 1403832
Put all updates from SMP into the download directory
startup.bat "jce_policy_zip=SAPJVM6_crypto.zip" Password: KEYWORD: 6782622
© SAP AG 2009. All rights reserved. / Page 52
Include the Stack XML from Solution Manager
A correct configured Maintenance Optimizer is a prerequisite now
© SAP AG 2009. All rights reserved. / Page 53
Add all main DVD here
Remove empty lines in advance Add-On’s as SAINT packages
© SAP AG 2009. All rights reserved. / Page 54
Solution Manger Upgrade Key ready
Solution Manager – MOPZ connection later necessary
© SAP AG 2009. All rights reserved. / Page 55
Upgrade UI Note 96317 and 962955
check with Page 88 of the Upgrade Guide modify /etc/hosts
© SAP AG 2009. All rights reserved. / Page 56
Non Unicode Upgrade to 7.3x is possible
To save time the Unicode decision can be done later
© SAP AG 2009. All rights reserved. / Page 57
New Upgrade pre configuration options
High resource use (minimal downtime, fast import, archiving off)
© SAP AG 2009. All rights reserved. / Page 58
Overview of upgrade configuration
Accept choice
© SAP AG 2009. All rights reserved. / Page 59
Overview of manual upgrade configuration
Manual selection will not apply maximum values
© SAP AG 2009. All rights reserved. / Page 60
Procedure with further Add-On‟s
Add additional packages as SAINT packages into EPS/in
© SAP AG 2009. All rights reserved. / Page 61
Mandantory connection to MOPZ needed
See Notes 1539356 (7.30) 1681435 (7.31) how to handle SEM Add-On
© SAP AG 2009. All rights reserved. / Page 62
Decision about EhP1 during Upgrade to 7.3x
Note 1022704 EHP_INCLUSION and SPSTACK_REQUEST
© SAP AG 2009. All rights reserved. / Page 63
Further descission about Add-On‟s
UPG WITH SAINT PACK or DELETE (for ST-PI possible)
© SAP AG 2009. All rights reserved. / Page 64
Decision about included Support Packages
© SAP AG 2009. All rights reserved. / Page 65
Problem occurs with the archive LUP.SAR
follow the mentioned Note for the component LUP
You have to give the Source out of DVD/zip from Number 51041560
there is the missing component LUP.SAR (SL controller)
See also:
Note 1562522 - SAPINST aborts during central instance installation
Note 1432609 - Inst.Systems Based on NW 7.3 - UNIX
© SAP AG 2009. All rights reserved. / Page 66
Decision about included SPAM update
© SAP AG 2009. All rights reserved. / Page 67
Optional: include SPDD and/or SPAU request
© SAP AG 2009. All rights reserved. / Page 68
ASU toolbox for BW
Even that ASU toolbox is optional, it contains ALL pre and post steps
© SAP AG 2009. All rights reserved. / Page 69
Installing BI_CONT on SAP NetWeaver 7.3
3800300 version „7.35“
© SAP AG 2009. All rights reserved. / Page 70
Development is locked after this Phase
Depending on your Upgrade preconfiguration
Please Note:
■ from BW Perspective is is now
not possible anymore to
change the following objects,
even that you are not jet in the
downtime phase
■ Query structures
■ InfoPackages definitions
■ Process Chains
■ This behavior didn’t changed
from former BW Upgrades prior
to EhP1 (7.01)
© SAP AG 2009. All rights reserved. / Page 71
Decision about SPDD prior the ACT phase
For BW type system you can continue without adjustments
© SAP AG 2009. All rights reserved. / Page 72
Unlock/Lock the shadow system is necessary
A friendly reminder/recap
D:\usr\sap\trans\bin>tp unlocksys FBM pf=TP_DOMAIN_FBM.PFL
This is tp version 372.04.65 (release 700, unicode enabled)
tp finished with return code: 0
meaning:
Everything OK
D:\usr\sap\trans\bin>tp unlock_eu FBM pf=TP_DOMAIN_FBM.PFL
This is tp version 372.04.65 (release 700, unicode enabled)
tp finished with return code: 0
meaning:
Everything OK
D:\usr\sap\trans\bin>tp locksys FBM pf=TP_DOMAIN_FBM.PFL
This is tp version 372.04.65 (release 700, unicode enabled)
tp finished with return code: 0
meaning:
Everything OK
D:\usr\sap\trans\bin>tp lock_eu FBM pf=TP_DOMAIN_FBM.PFL
This is tp version 372.04.65 (release 700, unicode enabled)
tp finished with return code: 0
meaning:
Everything OK
© SAP AG 2009. All rights reserved. / Page 73
Reset the Upgrade with report RSUPGRES
Another friendly reminder/recap (run with user DDIC in client 000)
Note 417670 - Additional information on resetting upgrade as of Release 6.10
Note 1518145 - FM DD_DB_MISSING_OBJECTS returns incorrect no. of objects
© SAP AG 2009. All rights reserved. / Page 74
Decision about ACT phase
Accept non-severe errors will be solved in a later phase
© SAP AG 2009. All rights reserved. / Page 75
Old “PREPARE” is now finished
Until this phase working with the system was possible
© SAP AG 2009. All rights reserved. / Page 76
End of phase Preprocessing
To ensure the recovering please backup the upgrade directory
© SAP AG 2009. All rights reserved. / Page 77
End of phase Downtime backup of DB
Upgrade is already over the top
© SAP AG 2009. All rights reserved. / Page 78
End of phase Postprocessing
Think about the start of BTCTRNS2 after the post work is finished
© SAP AG 2009. All rights reserved. / Page 79
End of phase Postprocessing
Think about the start of SGEN after the post work is finished
© SAP AG 2009. All rights reserved. / Page 80
End of phase Postprocessing
Might not occure with higher support package
© SAP AG 2009. All rights reserved. / Page 81
End of phase Postprocessing
Decision about SPAU create transport for further upgrades
© SAP AG 2009. All rights reserved. / Page 82
End of phase Postprocessing
Your technical Upgrade is finished
© SAP AG 2009. All rights reserved. / Page 83
Technical Upgrade has ended
End of phase Finalization
© SAP AG 2009. All rights reserved. / Page 84
Example runtime for BW 7.3x upgrade
Running at the end of the technical upgrade
© SAP AG 2009. All rights reserved. / Page 85
Postwork after 7.3x upgrade – new
Note 1165059 - ALE: Generating and reading change pointers after upgrade
Run Report RBDCPMIG_ALL_WITHOUT_MIG_FLAG in Test and Productive Mode
© SAP AG 2009. All rights reserved. / Page 86
Migrate the BI Authorization to 7.3x
More Details:
■ http://help.sap.com/saphelp_nw73/helpdata/en/45/5ae49cee142a50e10000000a11466f/frameset.htm
© SAP AG 2009. All rights reserved. / Page 87
Post Activites after Upgrade to BW 7.3x Note 1636053 - Upgrade to SAP NetWeaver 7.3x: BW server: Useful note
Note 1610259 - Controlling 'Returncode' behavior in update rules RSAU_RETURNCODE_NEW = X
(optional: this simplifies the migration of the update rules to a transformation).
You can switch on/off the new behavior for BAdI in 7.3x
Note 1489064 - DataSource problems after BW upgrade from 7.0 to 7.3
run Report RSAR_PSA_NEWDS_MAPPING_CHECK to check inconcistencies in
DataSources after Upgrade
Note 1633303 - RSMDATASTATE inconsistencies after upgrade from 7.0x to 7.3x
run function module RSDDTREX_AFTER_UPGRADE_70X_73X after the Upgrade
Note 1632284 - Program RSCOMPCONS should generate warning messages (SP06)
run Report RSCOMPCONS and repair the compounding of MultiProviders is necessary
Note 1532874 - Upgrade: Changing the HTTP reauthentication Add the profile Parameter icf/user_recheck =1 to the instance profile
Note 1635588 - Problems with Start / End routine created at BW 7.0+ Release (SP06)
Note 1572882 - Problems loading 3.5 views after upgrade to 7.0/7.01 (SP07)
© SAP AG 2009. All rights reserved. / Page 88
Post Activites after Upgrade to BW 7.3x Note 1636053 - Upgrade to SAP NetWeaver 7.3x: BW server: Useful note
Note 1553608 - Changelog Deletion Variant doesnt work in BW 7.01-7.3x
Note 1678212 - Deleting DTPs that do not have a transformation not possible
Note 1668991 - BW730: exception aggregation - new and old implementation
© SAP AG 2009. All rights reserved. / Page 89
Postwork after 7.3x upgrade - existing
Get everything which is needed here:
Managing your Upgrade with Innovative Tools http://scn.sap.com/docs/DOC-7856
The „upgrade Bible“ to 7.x from page 52 http://scn.sap.com/docs/DOC-11608
Check the generic post upgrade steps from here
© SAP AG 2009. All rights reserved. / Page 90
Thank you!
Roland Kramer Product/Solution Management BW/In-Memory
Mobil +49 (151) 4260 3219 [email protected]
http://www.sdn.sap.com/irj/sdn/edw-ops
© SAP AG 2009. All rights reserved. / Page 91
No part of this publication may be reproduced or transmitted in any form or for any purpose without the express permission of SAP AG. The information contained herein may be changed without prior notice.
Some software products marketed by SAP AG and its distributors contain proprietary software components of other software vendors.
Microsoft, Windows, Excel, Outlook, and PowerPoint are registered trademarks of Microsoft Corporation.
IBM, DB2, DB2 Universal Database, System i, System i5, System p, System p5, System x, System z, System z10, System z9, z10, z9, iSeries, pSeries, xSeries, zSeries, eServer, z/VM, z/OS, i5/OS, S/390, OS/390, OS/400, AS/400, S/390 Parallel Enterprise Server, PowerVM, Power Architecture, POWER6+, POWER6, POWER5+, POWER5, POWER, OpenPower, PowerPC, BatchPipes, BladeCenter, System Storage, GPFS, HACMP, RETAIN, DB2 Connect, RACF, Redbooks, OS/2, Parallel Sysplex, MVS/ESA, AIX, Intelligent Miner, WebSphere, Netfinity, Tivoli and Informix are trademarks or registered trademarks of IBM Corporation.
Linux is the registered trademark of Linus Torvalds in the U.S. and other countries.
Adobe, the Adobe logo, Acrobat, PostScript, and Reader are either trademarks or registered trademarks of Adobe Systems Incorporated in the United States and/or other countries.
Oracle is a registered trademark of Oracle Corporation.
UNIX, X/Open, OSF/1, and Motif are registered trademarks of the Open Group.
Citrix, ICA, Program Neighborhood, MetaFrame, WinFrame, VideoFrame, and MultiWin are trademarks or registered trademarks of Citrix Systems, Inc.
HTML, XML, XHTML and W3C are trademarks or registered trademarks of W3C®, World Wide Web Consortium, Massachusetts Institute of Technology.
Java is a registered trademark of Sun Microsystems, Inc.
JavaScript is a registered trademark of Sun Microsystems, Inc., used under license for technology invented and implemented by Netscape.
SAP, R/3, SAP NetWeaver, Duet, PartnerEdge, ByDesign, SAP Business ByDesign, and other SAP products and services mentioned herein as well as their respective logos are trademarks or registered trademarks of SAP AG in Germany and other countries.
Business Objects and the Business Objects logo, BusinessObjects, Crystal Reports, Crystal Decisions, Web Intelligence, Xcelsius, and other Business Objects products and services mentioned herein as well as their respective logos are trademarks or registered trademarks of Business Objects S.A. in the United States and in other countries. Business Objects is an SAP company.
All other product and service names mentioned are the trademarks of their respective companies. Data contained in this document serves informational purposes only. National product specifications may vary.
These materials are subject to change without notice. These materials are provided by SAP AG and its affiliated companies ("SAP Group") for informational purposes only, without representation or warranty of any kind, and SAP Group shall not be liable for errors or omissions with respect to the materials. The only warranties for SAP Group products and services are those that are set forth in the express warranty statements accompanying such products and services, if any. Nothing herein should be construed as constituting an additional warrant.
© Copyright 2012 SAP AG
All Rights Reserved