Upgrading your Go Kart Torque Converter

Go karts need go kart torque converters in order to function. It plays a vital role in a kart’s automatic transmission. It is basically a type of fluid coupling that enables the engine to rotate independently from the transmission. Upgrading the torque converter is a basic choice of kart racers and owners. But before doing the actual upgrade, you must first understand how the engine works. A go kart engine usually runs slowly if the driver tries to steer away from the ditch. At this speed, the entire torque traversing the torque converter is minimal. And at this stage, there is a considerable amount of exertion on the brake pedals in order to keep the go-kart in motion.

Pressing the go kart gas pedal when it is immobile will need a harder press when braking so that the wheels will stop. It is important to note that once the gas is pressed on, the engine will stop. And when the gas is pressed on, the engine automatically accelerates at fast pace since because more fluid is pumped through the torque converter. As a result, more torque is transmitted into the wheels.

So this is how the torque converter works and this shows its vital part in the whole performance of the kart. Once you understand how each component works, specifically how the torque converter works, you can now decide whether or not to upgrade the torque converter. Actually, you can make use of conventional machinery like unused washing machine to speed up your go kart driving.

So if you are planning to upgrade your go kart torque converter, here are some steps to do...

• Bolt the torque converter housing into the engine. Once bolted, it is a sure thing that the engine will speed-up.

• Fasten the fins snugly onto the go kart housing using a set of bolts. The torque converter is basically made up of fins and it is a must to tightly fix then onto the housing for maximum equalization of the torque converter to the engine. It is basically a kind of centrifugal pump and like a spinning cycle of a washing machine wherein the fluid moves around to the outside. And as the fluid spins and is thrown around, a vacuum is created which draws the additional amount of fluid in the center.

• Connect the turbine next to the kart’s transmission. The turbine spins as the fluid enters and the torque converter moves as a result.

• Connect the stator to the middle-most part of the torque converter. By doing this, the fluid coming from the turbine is redirected so it does not hit the pump all over again. As

a result, the torque converter will work at its peak. The astute blade design of the stator is a perfect feature of torque converters because it cases the fluid to be roughly redirected backward into the blade design. A one-way clutch

Upgrading the torque converter is a surefire way to get the maximum performance from your go kart. Expect to have smooth driving and optimum go kart racing.

Get high performance go kart torque converter and expect your race to be at its best. You can choose from the huge range of go kart components like torq a verter at cvtclutch.com.