upvc doors - munster joinery doors are hung on three 2d lift off hinges. all doors come fitted with...
TRANSCRIPT
1
1.01
uPVC DOORS
1.01
uPVC DOORS
MUNSTER JOINERY UK LTD. - TECHNICAL INFORMATION SHEETS
Title: uPVC Doors
Sheet No.: 1.01 Rev: D Date issued: 01/02/2016
AVAILABLE COLOURS:
White 9010
Ivory 1015
Grey 7015
Black 9005
Navy 5011
Red 3003
Green 6005
Silver 7001
Light Golden oak
Dark wood grain
Oregon pine
Non Embossed Grey 7015 Only
. Available in Dual colour check with Technical
Dual Colour Only available in Prestige Profile.
White matt inside only, any standard colour outside.
MUNSTER JOINERY UK LTD. - TECHNICAL INFORMATION SHEETS
Title: uPVC Doors
Sheet No.: 1.01 Rev: D Date issued: 01/02/2016
Glazed PVC doors
Maximum width 1050 mm Minimum width (part M) 970 mm Maximum height 2250 mm o/a incl. cill
PVC doors with infill panels
Maximum width 1050 mm Maximum height 2200 mm o/a incl. cill (full panel) Minimum width 850 mm Minimum height 1900 mm o/a incl. cill (full panel)
PVC double doors
Maximum width 1800mm (w) x 2250 mm o/a inc cill Minimum width 1610 mm (infill panels)
PVC Doors with Concealed Door Closer
Minimum width of Double Door with Concealed Door Closer 1600mm Minimum width of Single Door with Concealed Door Closer 850mm
Part M doors
To comply with part M of the Building Regulations in regard to disabled access:
PVC doors must have a width of 970 mm.
PVC double doors which are 1200 mm in width will comply (Both doors must open)
.A Composite Low level cill is fitted to Part M doors only, Cills are available in Grey or White
If not ordered Part M doors will be made with frame all round
PVC Doors with Sidelights
Minimum Width of Sidelight = 300mm
Letter boxes A door unit with a single side light must be at least 1470 mm wide to accommodate a letter box in the side light. A door unit with a double side light must be at least 1970 mm wide to accommodate a letterbox in the side light.
Points to remember
Any Glazed door over 2250 mm in height must have a fan light.
MUNSTER JOINERY UK LTD. - TECHNICAL INFORMATION SHEETS
Title: uPVC Doors
Sheet No.: 1.01 Rev: D Date issued: 01/02/2016
MUNSTER JOINERY UK LTD. - TECHNICAL INFORMATION SHEETS
Title: uPVC Doors
Sheet No.: 1.01 Rev: D Date issued: 01/02/2016
MUNSTER JOINERY UK LTD. - TECHNICAL INFORMATION SHEETS
Title: uPVC Doors
Sheet No.: 1.01 Rev: D Date issued: 01/02/2016
MUNSTER JOINERY UK LTD. - TECHNICAL INFORMATION SHEETS
Title: uPVC Doors
Sheet No.: 1.01 Rev: D Date issued: 01/02/2016
MUNSTER JOINERY UK LTD. - TECHNICAL INFORMATION SHEETS
Title: uPVC Doors
Sheet No.: 1.01 Rev: D Date issued: 01/02/2016
MUNSTER JOINERY UK LTD. - TECHNICAL INFORMATION SHEETS
Title: uPVC Doors
Sheet No.: 1.01 Rev: D Date issued: 01/02/2016
MUNSTER JOINERY UK LTD. - TECHNICAL INFORMATION SHEETS
Title: uPVC Doors
Sheet No.: 1.01 Rev: D Date issued: 01/02/2016
MUNSTER JOINERY UK LTD. - TECHNICAL INFORMATION SHEETS
Title: uPVC Doors
Sheet No.: 1.01 Rev: D Date issued: 01/02/2016
MUNSTER JOINERY UK LTD. - TECHNICAL INFORMATION SHEETS
Title: uPVC Doors
Sheet No.: 1.01 Rev: D Date issued: 01/02/2016
MUNSTER JOINERY UK LTD. - TECHNICAL INFORMATION SHEETS
Title: uPVC Doors
Sheet No.: 1.01 Rev: D Date issued: 01/02/2016
MUNSTER JOINERY UK LTD. - TECHNICAL INFORMATION SHEETS
Title: uPVC Doors
Sheet No.: 1.01 Rev: D Date issued: 01/02/2016
MUNSTER JOINERY UK LTD. - TECHNICAL INFORMATION SHEETS
Title: uPVC Doors
Sheet No.: 1.01 Rev: D Date issued: 01/02/2016
MUNSTER JOINERY UK LTD. - TECHNICAL INFORMATION SHEETS
Title: uPVC Doors
Sheet No.: 1.01 Rev: D Date issued: 01/02/2016
MUNSTER JOINERY UK LTD. - TECHNICAL INFORMATION SHEETS
Title: uPVC Doors
Sheet No.: 1.01 Rev: D Date issued: 01/02/2016
MUNSTER JOINERY UK LTD. - TECHNICAL INFORMATION SHEETS
Title: uPVC Doors
Sheet No.: 1.01 Rev: D Date issued: 01/02/2016
MUNSTER JOINERY U.K. LIMITED uPVC DOOR SPECIFICATION
Raw material
The door is manufactured from multi chamber profiles, extruded from a high impact strength modified uPVC compound.
Reinforcement
The door uses aluminium reinforcing extruded from 6063 alloy to BS 1474: 1987 specification for wrought aluminium alloy for general engineering purpose bars and section.
Furniture and fittings
Doors are hung on three 2D lift off hinges. All doors come fitted with a multi point locking system. This consists of a reversible latch bolt, a series of adjustable cams and a protector bolt. The locking system is operated by a lever handle and a five- lever cylinder dead lock. Split Spindle available on request. Hardware comes in a choice of black, white, brass, chrome, or brushed chrome.
Construction
The door uses heat- welded joints and is double rebated. Both door and frame carry EPDM seals to ensure weather tightness.
Infill panels
The door may be supplied either with a full or part infill panel or fully or partially glazed. The panel used is of 24 mm / 36mm thickness comprising 2 no. 1.8 mm uPVC skins separated by foam. The uPVC sheeting from which the skins are formed, is supplied by Veka. The foam is an extruded polystyrene foam containing a halogenated flame retarded system from the Dow Chemical Company.
Glazing
Doors are supplied with double glazed or triple glazed units. These units are Argon filled as standard for improved thermal performance and can be specified to incorporate low emissivity softcoat glass. The glazed unit is exclusive to Munster Joinery UK and carries a BSI kite mark to BS EN 1279: 1979 ref. Kite Mark License no. KM 52169. The unit incorporates toughened safety glass certified to BS EN12150 class A ref. Kite Mark License no. 52172.
MUNSTER JOINERY UK LTD. - TECHNICAL INFORMATION SHEETS
Title: uPVC Doors
Sheet No.: 1.01 Rev: D Date issued: 01/02/2016
THE Argongold® LONGER LIFE INSULATING GLASS UNIT, EXCLUSIVE TO MUNSTER JOINERY.
Longer life unit
Dual seal – Polyisobutylene primary seal and polyurethane main seal
Thermoplastic spacer bar
Spacer bar filled all round with high grade molecular sieves.
Excellent insulation properties
Argon filled for improved insulation
Soft coat low emissivity glass as standard
U- value 1.5 W/m²K (double glazed)
U- value 1.2 W/m²K (triple glazed)
Safety
Toughened safety glass in all doors
Quality
Kite Mark License No. KM 52169 to EN 1279 for insulating units
Kite Mark License No. KM 52172 to BS 12150 for safety glass
Manufactured under an EN ISO 9002 approve Quality System.
Installation
The door is installed by trained Munster Joinery UK personnel. Fitting is by means of galvanised steel fitting straps, fixed to the frame and attached to the masonry by means of proprietary fixings. 10 x 100 mm bolts to fix the door directly to brick work. 5 x 80 mm screws to fix the door to the cavity closer.
Building regulations
Thermal insulation: The door complies with the requirements of part L of the Building Regulations in regard to conservation of fuel and energy.
Disabled access: When installed as per Munster Joinery part M threshold detail, the door complies with part M of the Building Regulations.
All Front doors to be fitted with laminated glass, split spindle, Thumb screw barrel NHBC requirements (this must be confirmed at Pre start site meeting)
Vents
Doors can be fitted with trickle vents, head vents or acoustic vents.
MUNSTER JOINERY UK LTD. - TECHNICAL INFORMATION SHEETS
Title: uPVC Doors
Sheet No.: 1.01 Rev: D Date issued: 01/02/2016
MUNSTER JOINERY UK LTD. - TECHNICAL INFORMATION SHEETS
Title: uPVC Doors
Sheet No.: 1.01 Rev: D Date issued: 01/02/2016