usa doors & frames brochure_7.16.2020_compre… · table of contents 01 titan metal products,...

USASPECIALTYDOORS & FRAMES

[email protected]

ABOUTTITAN

03 Builders Series 20-90 Minute Doors

05 45 Minute Windows, Sidelites, Transoms

07 ClearKit Fire Rated Door Vision Kits

09 Ballistic Rated Doors and Frames

11 Detention Rated Doors and Frames

13 Hurricane Rated Doors and Frames

15 Security Rated Doors and Frames

17 Acoustic Rated Doors

19 FitQuick Fire Rated Framing (in progress)

21 Psychiatric Facilities Doors and Frames(in progress)

23 Blast Rated Doors and Frames (in progress)

25 Lead Lined Doors (in progress)

27 Tornado Rated Doors and Frames(in progress)

29 Elevator Doors and Frames (in progress)

As a leading manufacturer of entrances and storefronts, Titan Metal Products, Inc. offers the highest quality, USA-made stock and custom metal doors and frames. Whether it is a brand new building or an existing construction, Titan Metal Products, Inc.provides the expertise and materials needed to create the entrance you envisioned.

MORE THAN JUST A MANUFACTURER

We offer a complete solution - glass,doors and frames. We offer a completeline of safety products along with custom fabrication. Titan Metal Products, Inc.products are listed and labeled by Intertek and Underwriters Laboratories, nationally recognized testing laboratories approvedby OSHA.

Titan Metal Products, Inc. is the metal doors and framing division of SAFTI FIRST Fire Rated Glazing Solutions and O’Keeffe’s Inc. Architectural Building Products, leading USA-manufacturers of architectural glass and metal products for over 80 years.

OUR COMPANIES

View our complete line of USA-made stock and custom metal doors and frames.

Take an inside look into our door and

framing manufacturing facility in Merced, CA.

USA

View our complete line of USA-made stock and custom metal doors and frames.

TABLE OFCONTENTS

01 Titan Metal Products, Inc. Specialty Doors & Frames 02

BUILDERSSERIES

20-90 MINUTEDOORS


PRODUCT ADVANTAGES

FINISH OPTIONS

CERTIFICATIONS

20-45 minute, full vision fire protective doors with clear SuperLite I or SuperClear 45-HS/HS-LI (patent-pending) fire protective glazing bySAFTI FIRST.

60-90 minute, full vision temperature rise doors with clear SuperLite II-XL fire resistive glazing by SAFTI FIRST.

Easily integrates with GPX Architectural Series wall system for a complete 1-2 hour fire resistive wall & door assembly.

20-45 min, standard door profile includes 5 in. rail and 2 in. frame. Narrow door profile includes 3-3/4 in. rail and 1-1/8 in. frame. Both include 10 in. ADA compliant bottom rail (can be modified with AHJ approval).

60-90 min, standard door profile includes 6 in. rail and 2 in. frame. Narrow door profile includes 3-3/4 in. rail and 1-1/8 in. frame. Both include 10 in. ADA compliant bottom rail (can be modified with AHJ approval).

Can be used in interior and exterior applications.

Available with HAVEN Lockdown™, a revolutionary, easy to install, smart door lock system to stop an active threat in schools, hospitals, offices, places of worship, detention facilities and any other facility.

Available with high performance fluoropolymer finishes by PPG, or other custom finishes including stainless steel or aluminum clad.

Listed and labeled by UL and Intertek.

Made in the USA with fast lead times and competitive pricing.

5 year manufacturer’s warranty.

High performance fluoropolymer finishes by PPG, or other custom finishes including stainless steel or aluminum clad.

APPROVALSUL 9, UL 10B, UL 10C, NFPA 80, NFPA 252, NFPA 257, ASTM E152, ASTM E163, ASTM E2074, ASTM E2010-01, ULC CAN4-S104, ULC CAN4-S106, CPSC16 CFR1201 Cat. II., ANSI Z97.1

Listed and labeled by Intertek andUnderwriters Laboratories, nationally recognized testing laboratoriesapproved by OSHA.

Maximum Door Opening:

Single Door

54 in. x 120 in. (1.37 m x 3.05 m)*

*For max. door sizes, continuous hinges will be required.

96 in. x 120 in. (2.44 m x 3.05 m)*

Single Door

45 MINUTEWINDOWS,SIDELITES,

TRANSOMS


PRODUCT ADVANTAGES

Tested to NFPA 257/UL 9 for windows and NFPA 252/UL 10B/UL 10C for sidelites and transoms.

Supplied with patent-pending SuperClear 45-HS/HS-LI (patent-pending) or SuperClear 45-HS-LI by SAFTI FIRST.



Listed and labeled by Intertek.



MATERIALS

CERTIFICATIONS

Painted SteelAluminum CladStainless Steel CladBronze and Copper Clad

Listed and labeled by Intertek,a nationally recognized testinglaboratory approved by OSHA.

APPROVALSNFPA 257, UL 9, NFPA 252, UL 10B, UL 10C,CPSC Cat. II

Maximum Window Sizes:

Max. Size of Lite

Max. Overall Dimensions 9’4” wide x 8’10” high

Min. Wall Thickness 3-3/4”

2,550 sq. in.

Maximum Sidelite and Transom Sizes:

Max. Size of Door Openings

Max. Size of Steel Transom 60” wide x 2” hight

Max. Size of Raised (Hinge Side) Lite

Max. Overall Dimensions

Min. Wall Thickness

2,500 sq. in. with clear width not to exceed 50”

12’6” (150”) wide x 10’0” high

3-3/4”

6’0” wide x 7’0” high

CERTIFICATIONSListed and labeled by Underwriters Laboratories, a nationally recognizedtesting laboratory approved by OSHA.

CLEARKITFIRE RATED

DOORVISION KITS


PRODUCT ADVANTAGES

20-90 minute vision kits for use in any listed 1-3/4” fire rated non-temperature rise or temperature rise hollow metal, wood or composite doors.

Can be customized to accommodate any size for use in full-vision doors, half-lite doors or doors with vision lites up to 100 sq. in.

Can be used with SuperLite I, SuperClear 45-HS/HS-LI (patent-pending), SuperLite X-45/60/90 SuperLite II-XL and SuperLite II-XLM glazing by SAFTI FIRST.

Constructed with 20 gauge steel. 2” trim, mitered and welded. Continuous glass retainer, mounting holes in the bevel on non-corridor side.

Primed for field paint or Coraflon finishes by PPG. Custom finishes may be available by calling the manufacturer.



BALLISTICRATED DOORS

AND FRAMES


PRODUCT ADVANTAGES

Meets UL 752 Level 1, 2 and 3 for use in single and pair doors, sidelites, transoms, storefronts and openings.

Can be used with any listed ballistic glazing in compliance with UL 752 Level 1, 2 or 3.

Standard door profile includes 5 in. rail and 2 in. frame. Narrow doorprofile includes 3-3/4 in. rail and 1-1/8 in. frame. Both include 10 in. ADA compliant bottom rail (can be modified with AHJ approval).

Minimum 1-3/4 in. door thickness.

Standard 2 in. frame profile for storefronts and openings.




Doors are shipped fully prepped for hardware. Multiple hardware options available.




MATERIALS

CERTIFICATIONS


UL 752 BALLISTIC RATINGLevel 1 = 9 mm Full Metal Copper Jacket with Lead Core

Level 2 = .357 Magnum Jacketed Lead Soft Point

Level 3 = .44 Magnum Lead Semi-Wadcutter Gas Checked

Listed and labeled by Intertek,a nationally recognized testinglaboratory approved by OSHA.

DETENTIONRATED DOORS

AND FRAMES


PRODUCT ADVANTAGES

Tested to ASTM F1450 and certified to meet NAAMM/HMMA 863 requirements for use in detention and correctional facilities.

Complies with ASTM F1233, Standard Test Method for Security Glazing Materials and Systems; ASTM F1915, Standard Test Methods for Glazing for Detention Facilities; ASTM 1592, Standard Test Method for Structural Performance of Sheet Metal Roof and Siding Systems by Uniform Static Air Pressure Difference; SDI A250 Specifications for Standard Steel Doors and Frames.

Can be supplied to also meet UL 752 Level 3 Ballistic ratings.

Can be supplied to also meet smoke and fire ratings up to 3 hours with positive pressure.



Listed and labeled by Guardian Fire Testing Laboratories, Inc.

MATERIALS

CERTIFICATIONS


Listed and labeled by GuardianFire Testing Laboratories,a nationally recognized testinglaboratory approved by OSHA.

HURRICANERATED DOORS

AND FRAMES


PRODUCT ADVANTAGES

Meets TAS 201 Large Missile Impact, TAS 202 Air and Water Infiltration and TAS 203 Cyclic Wind Loading for single and pair doors.

Complies with High Velocity Hurricane Zone (HVHZ) testing requirements.

Complies with TX Department of Insurance criteria for protection from windborne debris in Inland I and Seaward zones.

Can be supplied with hurricane rated glazing for maximum transparency.





MATERIALSPainted SteelAluminum CladStainless Steel CladBronze and Copper Clad

SECURITYRATED DOORS

AND FRAMES


PRODUCT ADVANTAGES

MATERIALS

CERTIFICATIONS

Tested to NFPA 252, UL 10C and ULC/CAN S104 up to 3 hours.

Meets Static and Rack Load Requirements to NAAMM Standard HMMA 863-87 with doors 2” thick and 12 gauge steel faces.

Meets PG&E requirements for fire rated security doors and frames.

20-90 minute single and pair doors in large sizes up to 5’0” wide x 12’0” high for single doors and 10’0” wide x 12’0” high for pair doors. 3/4” astragal must be applied to standard pairs.

3 hour single doors up to 4’0” wide and 8’0” high.

Available with vision lite.

Meets 450˚F @ 30 mins. temperature rise door requirement.

Available with painted finish or primed for field paint.





Listed and labeled by Intertek,a nationally recognized testing laboratory approved by OSHA.

ACOUSTICRATED DOORS

AND FRAMES


PRODUCT ADVANTAGES

High Sound Transmission Class Rating (STC) up to 44 STC for use in recording studios, auditoriums, schools, offices, conference rooms, machinery enclosures, and other applications where noise abatement is required or desired.

Can be supplied to meet fire ratings up to 90 minutes with positive pressure.






APPROVALSASTM E-119, UL 263, ULC S101

FITQUICKFIRE RATED

FRAMING(in progress)


PRODUCT ADVANTAGES

Revolutionary fire protective and fire resistive framing system rated from 45-120 minutes and meets ASTM E-119, UL 263 and CAN/ULC S101 up to 2 hours.

The clean, sharp edges and uniform narrow sightlines mimic the look and feel of popular aluminum storefront systems.

Designed to be easily installed in the field to reduce time and labor costs.

Can we be used with SuperClear 45-HS/HS-LI (patent-pending), SuperLite II-XL, SuperLite II-XLM and SuperLite II-XLB fire rated glazing from SAFTI FIRST.

Available with high performance fluoropolymer finishes by PPG, clear anodized, bronze anodized, black anodized, and more. Custom finishes may be available by calling the manufacturer.



PSYCHIATRICFACILITIES

DOORS ANDFRAMES

(in progress)


PRODUCT ADVANTAGES

Designed with patient and staff safety in mind, these doors and frames can be equipped with ligature-resistant hardware and door accessories, tamper-proof fasteners, and other safety mechanisms to prevent staff lockout.

Can be supplied with approved safety glazing to allow line of sight or visual inspection.

Can be supplied to also meet fire ratings up to 3 hours with positive pressure.






BLASTRATED DOORS

AND FRAMES(in progress)


PRODUCT ADVANTAGES

Engineered to meet or exceed the Department of Defense (DoD) Minimum Antiterrorism Standards for Buildings with Blast Resistance.


Can be supplied with blast rated glazing for maximum transparency.







LEADLINEDDOORS

(in progress)


PRODUCT ADVANTAGES

Durable lead sheets are incorporated in the door and frame to protect against radiation.

Typically used in X-ray and imaging rooms, healthcare facilities, military and government facilities, nuclear power plants, laboratories, and other areas where exposure to radiation is a concern.

Can be supplied to meet fire ratings up to 3 hours with positive pressure.






TORNADORATED DOORS

AND FRAMES(in progress)


PRODUCT ADVANTAGES

Engineered to meet FEMA P-361, Safe Rooms for Tornadoes and Hurricanes: Guidance for Community and Residential Safe Rooms.

Available in single and pair doors.

Can be used storm shelters, community shelters, residential shelter and safe rooms.






ELEVATORDOORS AND

FRAMES(in progress)


PRODUCT ADVANTAGES

Fire rated elevator doors and frames tested to NFPA 252, UL 10B/10C, ULC S104 up to 90 minutes.

Pair doors up to 27-3/4” wide x 108-1/2” high.

Center opening, horizontal single slide elevator entrance doors independently mounted along proprietary 2 hour rated shaft wall partition with an integral 54” wide x 108” high proprietary encasement door frame.

Available with high performance fluoropolymer finishes by PPG and stainless steel. Custom finishes may be available by calling the manufacturer.



MATERIALSPainted SteelStainless Steel

CERTIFICATIONSListed and labeled by Intertek,a nationally recognized testinglaboratory approved by OSHA.

APPROVALSNFPA 252, UL 10B/10C, ULC S104

USA

Titan Metal Products, Inc.1891 Wardrobe AvenueMerced, CA 95341

Ph: 209.386.1613Fax: [email protected]

© Titan Metal Products, Inc. June 2020

usa doors & frames brochure_7.16.2020_compre… · table of contents 01 titan metal products,...

Documents