usb type c dx07 series - heilind electronics · plug (with paddle card) line up * paddle card no.1...

CONFIDENTIAL • Copyright © 2015 • JAE Electronics, Inc. • www.jae.com

USB Type C DX07 Series

Introduction

March 2015

1


Laptop

Power charging

Smartphone/ tablet

Storage

USB memory

TV / Monitor

Applications - New small form factor - Scales for future USB higher speed performance - Supports scalable applications - Scalable power charging

2


Host to Device

• Host and device identified by connector type

• Legal cables must be A to B

Type C cables can have the same connector at both ends.

3

SSD


<Features> ・ USB3.1 signaling supported [10Gbps currently 20Gbps in future] ・ User friendly- Reversible insertion ・ No spring contacts in receptacle (Consider the damage risk for device) ・ Friction lock equipped ・ Enhanced EMI performance ・ Power delivery supported (3A / 5A)

USB Type-C Feature

USB Standard / Mini / Micro

[USB2.0 : 480Mbps] [USB3.0 : 5Gbps] [USB3.1 : 10Gbps]

Other High Speed Interface Connectors

[5G~10G] USB Type C

~10Gbps

JAE is one of the leading members of USB Newark (USB type C) working group.

Audio Jack Connector

4


Standard USB3.1 Type C

USB2.0 Micro

USB3.0 Micro

USB3.0 Standard

Thunderbolt (miniDP compatible)

JAE Products DX07 DX4 PC2 PC2 DP3

Pin Count 24 5 10 9 20

Pitch 0.5mm 0.65mm 0.65mm 2&2.5mm 0.6mm

Contact Rows 2 1 1 2 2

Front View (Rece.)

A (Interior height)

2.56mm 1.85mm 1.85mm 5.12mm 4.6mm

B (Interior width)

8.34mm 6.92mm 12.25mm 12.5mm 7.5mm

Transfer speed (1 Lane)

10Gbps （20Gbps in the

future）

480Mbps

5Gbps

5Gbps

10Gbps

Comparison with Existing Standard I/O

A

B

A

B

A

B

A

B

5


Host side Device Side Both Sides USB2.0 [480Mbps]

Standard A (4 pins) Standard B (4 pins) →

Shift to (Not mating compatible)

USB Type C （24pins）

Micro AB (5 pins) Micro AB (5 pins) Micro B (5 pins) Mini B (5 pins)

↓ Backward compatible

↓ Backward compatible

USB3.1 Gen１ [5Gbps]

Standard A (9 pins) Standard B (9 pins) Micro AB (10 pins) Micro AB (10 pins)

Micro B (10 pins) ↓ Backward

compatible ↓ Backward

compatible USB3.1 Gen２ [10Gbps]

Standard A (9 pins) Standard B (9 pins) Micro AB (10 pins) Micro AB (10 pins)

Micro B (10 pins)

※Receptacle side

Comparison with Legacy USB

6


Pin No. A1 ･････ A12

B12 ･････ B1

A12 ･････ A1

B1 ･････ B12

Receptacle (Front view)

A1 A2 A3 A4 A5 A6 A7 A8 A9 A10 A11 A12

GND TX1+ TX1- VBUS CC1 D+ D- RFU1 VBUS RX2- RX2+ GND

GND RX1+ RX1- VBUS RFU2 D- D+ CC2 VBUS TX2- TX2+ GND

B12 B11 B10 B9 B8 B7 B6 B5 B4 B3 B2 B1

A12 A11 A10 A9 A8 A7 A6 A5 A4 A3 A2 A1

GND RX2+ RX2- VBUS RFU1 D- D+ CC VBUS TX1- TX1+ GND

GND TX2+ TX2- VBUS VCONN RFU2 VBUS RX1- RX1+ GND

B1 B2 B3 B4 B5 B6 B7 B8 B9 B10 B11 B12

Plug (Front view)

･TX**/RX** ･･･ Super Speed differential pair (4 lanes) ･D* ･･･ USB2.0 differential pair (1 lane) ･CC* ･･･ Configuration Channel ･SBU ･･･ Sideband Use ･ VCONN ･･･Power supply to chip in Plug.

<Mating Sequence> ･First ･･･ GND & VBUS ･Second･･･ Other pins

Pin Assignment

USB Type-C Specification Release 1.0

SBU1

SBU2

SBU1

SBU2

Rec. : CC1 / CC2 ↓ Plug : CC / VCONN

7

CONFIDENTIAL • Copyright © 2015 • JAE Electronics, Inc. • www.jae.com 8

Standard Outline Standard Outline1 3A Required Yes2 5A Required -3 3A Required -4 5A Required -5 3A Optional Yes6 5A Required -7 1.5A N/A -8 5A Required -9 1.5A N/A Yes

10 5A Required -11 1.5A Required -12 5A Required -13 1.5A Optional -14 5A Required -15 Type C Plug MINI B Plug USB2.0 (≤4m) 0.5A N/A -16 1.5A Required -17 3A Required -18 1.5A Optional -19 3A Optional -20 Type C Plug Micro B Receptacle USB2.0 (≤0.15m) 1.5A N/A -

21 Type C Plug STD A ReceptacleUSB3.1Gen1

(USB3.0)(≤0.15m) 1.5A Optional -

USB3.1Gen.1(USB3.0)

Length

(　) Type C Spec.

Max Currrent

No. ID chip

Type C Plug Type C Plug USB3.1Gen.2≤1m

(≤1m)

Connector outline(host)

Connector outline(Device)

Cable variationTransmission

Spec.

USB2.0

(≤2m)

≤1.5m(≤4m)

STD A Plug Type C Plug (≤1m)

Type C Plug Type C Plug

Type C Plug Type C Plug

STD A Plug Type C Plug

USB3.1Gen.2

USB2.0

Plug USB2.0

Micro B Plug USB3.1Gen.2

Plug

Type C Plug

Type C Plug

Micro B Plug USB2.0

JAEproduct

plan

Type C Plug

STD B Plug USB3.1Gen.2 (≤1m)

(≤4m)

(≤1m)

(≤4m)

STD B

≤1.5m(≤4m)

Type C

Note 1: ID chip is inside of cable to detect current carrying capability and performance of cable. Note 2: Optional is a keyword that describes features not mandated by this specification. However, if an optional feature is implemented, the feature shall be implemented as defined by this specification (optional normative).

Type C Cable Variations Allowed by Spec


When Shell is Shorter Than Specification

6.20±0.2

<Interface Definition> This specification defines the USB Type-C receptacle shell length. To be certified at the connector level, a USB Type-C receptacle connector shall have features that comply with the defined shell dimensions. The shell length is not applicable when the USB Type-C receptacle certification is done at the system level instead of the component level. If a USB Type-C receptacle connector is certified at the system level, then the connector mounted in the associated system hardware shall pass all applicable electrical and mechanical compliance tests.

Extracted from the “USB Type-C Specification Release 1.0”

6.20±0.2 6.65±0.1

Plug Rece.

(Gap after mating) 0.15 ～ 0.75

If the shell length is shorter than 6.2±0.2, the USB Type C mechanical tests must be conducted by the customer with the actual device housing, or an equivalent set up to confirm performance. <Evaluation Items> ・4-axis continuity test ・Wrenching strength test *Connector by itself may not meet all of the mechanical requirements.

USB Type-C Specification Release 1.0

9


JAE Proposal

10


Items from JAE Part No. USB

Ver. Form Center Height 【mm】

Shell Length 【mm】

Note

Recept

① DX07B024JJ※ 3.1 /

2.0

2 Row SMT Mid Mount 0.47 4.7 Sample Preparation

② DX07S024JJ※ On Board 1.57 4.7 Sample Preparation

③ DX07S024XJ※ HYBRID SMT and T/H On Board 1.57 6.2 Under Development

「※」 TBD

Part No. USB Ver. Cable ID chip Current

rating Note

Plug

(with paddle card)

① DX07P024MJ※P3※ 3.1

Type C ⇔ C (One Side, P1) Yes 3A Combine ① and ② for a USB3.1 Gen.1 and Gen.2 compliant Type C ⇔ C harness ② DX07P024MJ※P3※ Type C ⇔ C (Other Side, P2) No 3A

③ DX07P024MJ※P2※ 2.0

Type C ⇔ C No 3A Sample Preparation

④ DX07P024MJ※P2※ Type C ⇔ Std. A No 1.5A Sample Preparation

Part No. USB Ver. Cable Current

rating Length

【m】 Diameter

【ｍｍ】 Note

Cable assembly

① DX07018S※※**** 3.1 Type C ⇔ C 3A

1 Max. Φ5.5 Under Development

② DX07006S※※**** 2.0

1.5 Max. Φ4.3 Under Development

③ DX07004S※※**** Type C ⇔ Std. A 1.5A 1.5 Max. Φ3.5 Under Development

11


(2.0

4)

- Concept - • USB3.1 supported (Full-Featured) • Mid-Mount type • Dual row SMT (Contact) / DIP (Shell & Mid Plate) • Mating depth:4.7mm

SECTION Mid plate

Component name Qty

1 Upper contact 12

2 Lower contact 12

3 GND plate 2

4 Mid plate 1

5 Shell 1

6 Insulator 1

7 Rear Shield (Optional) 1

Receptacle (Dual Row SMT Mid-mount)

12.0 8.94

8.17

GND plate

Engagement portion for Friction lock

SECTION

Upper contact Lower contact

12

Mated condition

（1.95）

Insulator

Shell


PCB Footprint (Dual Row SMT Mid-mount)

13

Footprint will be on the Type C spec for dual row SMT mid mount.

(2.0

4)

0.47 (Center height)


- Concept - • USB3.1 supported (Full-Featured) • On-Board type • Dual row SMT (Contact) / DIP (Shell & Mid Plate) • Mating depth:4.7mm

Insulator

Shell

SECTION Mid plate

Component name Qty

1 Upper contact 12

2 Lower contact 12

3 GND plate 2

4 Mid plate 1

5 Shell 1

6 Insulator 1

7 Rear Shield (Optional) 1

Receptacle (Dual Row SMT On-board)

8.94

8.17

GND plate

Engagement area for Friction lock

(3.1

4)

SECTION Upper contact Lower contact

Mated condition

（1.95）

14



PCB Footprint (Dual Row SMT On-board)

(3.1

4)

15

Not compatible with reference footprint on the Type C spec.


- Concept - • USB3.1 supported (Full-Featured) • On-board type • DIP and SMT (Contact) • Mating depth:5.5mm

SECTION

Engagement portion for

Friction lock

(3.3

4)

Upper contact Lower contact

Mated condition

（1.15）

Shell

Insulator Bracket

9.4

9.65

GND plate

Locator

Rear shield

Mid plate

Component name Q’ty

1 Upper contact 12

2 Lower contact 12

3 GND plate 2

4 Mid plate 1

5 Shell 1

6 Insulator 1

7 Bracket 1

8 Locator 1

9 Rear Shield 1

Receptacle (Hybrid On-board)



(3.3

4)

PCB Footprint (Hybrid On-board)


Component name Qty

1 Contact 24

2 GND spring 2

3 Friction lock 1

4 Shell 1

5 Insulator 1

6 Inner Insulator (inside) 2

7 Insulation Tape (inside) 2

8 Cap 1

9 Paddle card 1

Plug (with Paddle Card) - Concept - • USB3.1 supported (Full featured) • Cap included with plug • Contact terminals soldered on paddle card

GND spring

SECTION

Friction lock Contact

2.4

3.15

18

9.8

8.25

14.7

Insulator

Shell

Paddle card

Cap


Connector outline

(DFP side)

Connector outline

(UFP side)

Standard Standard

① DX07P024MJ※P3※･ID chip･Resistor　etc.

② DX07P024MJ※P3※･Resistor　etc.(No ID chip)

③ DX07P024MJ※P2※ N/A Type C Type C USB2.0 3.0A

④ DX07P024MJ※P2※ ･Resistor Std. A Type C USB2.0 1.5A

Type C 3.0AUSB3.1

Gen.1 and Gen.2

Type C

Paddle card: C

Paddle card: D

Paddle card

TypeParts

on Paddle Card

Paddle card: A

Paddle card: B

Plug(With paddle card)

Part No.

Cable variation

TransmissionSpec.

Max.current

Plug (with Paddle Card) Line Up

* Paddle card No.1 and No.2 must be used for a Type C ⇔ C USB3.1 Gen.1 and Gen.2 compliant harness.

33～38

9.2

Paddle card: A & B

19～21

9.2

*Paddle card dimensions are under consideration

Paddle card: C & D

19

Four Types


Cable Assembly Line Up Three Types

Connector outline(Host)

Connector outline

(Device)Standard Standard

①

DX07018S※※****

Type C Type C USB3.1Gen.2

≤1.0m 3.0AID chip is in a plug

②

DX07005S※※****

Type C Type C USB2.0 ≤1.5m 3.0A N/A

③

DX07004S※※****

Std. A Type C USB2.0 ≤1.5m 1.5A N/A

LengthMax

Currrent

No. ID chip

Cable variationTransmissi

onSpec.

Cable assembly

Part No.

Std.A

20

usb type c dx07 series - heilind electronics · plug (with paddle card) line up * paddle card no.1...

Documents