Use of 80/20 Products in Use of 80/20 Products in Robot BuildingRobot BuildingT-Slotted Extrusions and T-Slotted Extrusions and

QuickframeQuickframe

http://www.youtube.com/watch?http://www.youtube.com/watch?v=50SEmXDh6Bw&eurl=http://v=50SEmXDh6Bw&eurl=http://

www.8020.net/Default.aspwww.8020.net/Default.asp

T10 Series Extrusion (1010)T10 Series Extrusion (1010)

1”square, sold primarily in 8’ lengths1”square, sold primarily in 8’ lengths Uses 80/20’s 6105-T5 alloy to achieve:Uses 80/20’s 6105-T5 alloy to achieve:

Yield strength of 35,000 lbs/sq. inYield strength of 35,000 lbs/sq. in Tensile strength of 38,000 lbs/sq. inTensile strength of 38,000 lbs/sq. in Superb straightness and very low twist, even at 20 ft Superb straightness and very low twist, even at 20 ft

lengths.lengths. Weight – ½ lb/ft.Weight – ½ lb/ft. Vibration proof – locks nuts in, making it virtually Vibration proof – locks nuts in, making it virtually

impossible to vibrate loose.impossible to vibrate loose. Modular T-slot system allows fast and strong Modular T-slot system allows fast and strong

assembly.assembly.

T-Nut (3382, 3280, 3287)T-Nut (3382, 3280, 3287)

Available in stainless steel, hardened high-Available in stainless steel, hardened high-carbon steel, and zinc plated steel.carbon steel, and zinc plated steel.

Compatible with T10 and T15 series Compatible with T10 and T15 series extrusion.extrusion.

¼-20 Thread size.¼-20 Thread size. Strong, sturdy, and easy to use. Slides Strong, sturdy, and easy to use. Slides

inside T-slot.inside T-slot. Double, triple, and custom hole t-nuts Double, triple, and custom hole t-nuts

available.available.

Drop-In T-nuts (3376)Drop-In T-nuts (3376)

Add T-nuts, and other components to an Add T-nuts, and other components to an extrusion when ends cannot be accessed.extrusion when ends cannot be accessed.

Rubber nub holds nut in to slot, and Rubber nub holds nut in to slot, and provides a handle for removal.provides a handle for removal.

Available in all materials as T-nut.Available in all materials as T-nut.

Anchor Fasteners (3395)Anchor Fasteners (3395)

For making 90For making 90oo angles. angles. Zinc casting with lacquer finish.Zinc casting with lacquer finish. Incredibly strong, single anchor holds 500 Incredibly strong, single anchor holds 500

lbs of direct force, and 250 lbs of lbs of direct force, and 250 lbs of cantilevered force.cantilevered force.

Strongest type of fastener 80/20 sells.Strongest type of fastener 80/20 sells. Requires drilling of counterbore, 9/16inRequires drilling of counterbore, 9/16in

Joining Plates (4115, 4136, 4141)Joining Plates (4115, 4136, 4141)

Precision machined from anodized 6105-Precision machined from anodized 6105-T5 alloy. T5 alloy.

Strong, lightweight, requires virtually no Strong, lightweight, requires virtually no machining.machining.

Easy to assemble and use very precisely.Easy to assemble and use very precisely. 1540 uses 3 main types: 4 hole corner 1540 uses 3 main types: 4 hole corner

(4115) holds 325lbs, 75lbs, gusseted 4 (4115) holds 325lbs, 75lbs, gusseted 4 hole (4136) holds 325lbs, 220lbs, and 4 hole (4136) holds 325lbs, 220lbs, and 4 hole tee joining plate (4141).hole tee joining plate (4141).

Quickframe Extrusion (9000)Quickframe Extrusion (9000)

1” square1” square Made from Anodized 6105-T5Made from Anodized 6105-T5 Very Lightweight, ¼ lb/ftVery Lightweight, ¼ lb/ft Interior is grooved for superior hold to Interior is grooved for superior hold to

nylon connectors.nylon connectors.

Quickframe Nylon Connectors Quickframe Nylon Connectors (Various model numbers)(Various model numbers)

2, 3, 4, and 5 way nylon connectors2, 3, 4, and 5 way nylon connectors End capsEnd caps Conversion tee to convert to T10 Conversion tee to convert to T10

extrusion. extrusion. An enormous selection of strong and An enormous selection of strong and

lightweight connectors for every lightweight connectors for every application.application.