use of window, crossing window and polygon window selection in autocad

8
What is the use of window selection, crossing window selection, and polygon window selection in AutoCAD? Presentation by: ADMEC MULTIMEDIA INSTITUTE www.admecindia.co.in

Upload: admec-multimedia

Post on 15-Sep-2015

29 views

Category:

Documents


0 download

DESCRIPTION

This presentation is designed to demonstrate the use of many of the selection options. As with so many aspects of AutoCAD, developing a good working knowledge of these options can drastically improve your drawing speed and efficiency.

TRANSCRIPT

PowerPoint Presentation

What is the use of window selection, crossing window selection, and polygon window selection in AutoCAD?Presentation by: ADMEC MULTIMEDIA INSTITUTEwww.admecindia.co.in

Window Selection tool in AutoCADThe Window selection allows us to pick two diagonal corners (X, Y) which select everything that comes completely in the selection window (press left click and drag left to right). Blue color represents the Window Selection.

So you can see in example, the window selection can select only 3 circles. The selection is very useful when you want to select only the objects that come inside the selection area only. Crossing Window Selection in AutoCADNow the second type of selection is Crossing Window Selection. If you want to use this selection (press left mouse button and drag right to left). You can see in image the selection is being shown in green color.

The result is 6 selected out of 9. This means the Crossing Window Selection selects all the elements whether they are completely or partially inside the window selection.Polygon Window selection in AutoCADThe Polygon Window selection allows us to pick more than two points defining a polygon in which selects everything within the polygon. First select move command (m) and type (wp) for Polygon Window Selection than you can select any object. This selection type is very good to selected elements and drawings on an odd angle or shape.

In above images you can see that only that part is select which is under the polygon window selection. Contact Us:ADMEC MULTIMEDIA INSTITUTEC-7/114, IInd Floor, Sector- 7, Rohini, Delhi- 85Landmark:Near Rohini East Metro StationHelpline 1:+91 9811 818 122Helpline 2:+91 9911 782 350

ADMEC MULTIMEDIA INSTITUTE

For More information you can visit :http://www.admecindia.co.inhttp://www.cadtraininginstitute.com

Or email us at: [email protected]