user guide - theorem solutions€¦ · multi-cad v19.3 for 3dexperience catia v6 - creo 2 | p a g e...
TRANSCRIPT
USER GUIDE CREO - 3DEXPERIENCE CATIA V6
Release Version : 19.3
Revision: 1.0
Issued: /08/2016
© THEOREM SOLUTIONS 2016
Multi-CAD v19.3 for 3DEXPERIENCE CATIA V6 - CREO
1 | P a g e ©Theorem Solutions 2016
Contents
Overview of Visualise 3D ........................................................................................................... 2
About Theorem ......................................................................................................................2
Theorem’s Product Suite ........................................................................................................2
The 3DEXPERIENCE CATIA V6 Bi-directional CREO Translator ...............................................3
Primary Product Features .......................................................................................................3
Primary Product benefits? ......................................................................................................4
Getting Started .......................................................................................................................... 5
Documentation .......................................................................................................................5
Installation Media ...................................................................................................................5
Installation ..............................................................................................................................5
License Configuration .............................................................................................................5
Running the Product ...............................................................................................................5
Using the Product ...................................................................................................................... 7
Translating Interactively from within 3DEXPERIENCE ............................................................... 7
Theorem Interactive Conversion Settings ..............................................................................7
Advanced User Options ......................................................................................................9
Theorem Export ................................................................................................................... 11
Theorem Import .................................................................................................................. 14
Translating in Batch using CATUtil – PLMBatchDataExchange ................................................ 17
Batch Export to CREO .......................................................................................................... 17
Batch Import from CREO ..................................................................................................... 17
Log File Generation.................................................................................................................. 18
Export process Log Files ...................................................................................................... 18
Import process Log Files ...................................................................................................... 19
3DEXPERIENCE CATIA V6 Environment Files ........................................................................... 19
Additional Information ............................................................................................................ 19
Multi-CAD v19.3 for 3DEXPERIENCE CATIA V6 - CREO
2 | P a g e ©Theorem Solutions 2016
Overview of Visualise 3D
About Theorem
Theorem Solutions is a world leader in the field of
Engineering Data Services and Solutions. This
leadership position stems from the quality of our
technology and the people in the company. Quality
comes not only from the skills and commitment of
our staff, but also from the vigorous industrial use of
our technology & services by world leading customers.
We are proud that the vast majority of the world's leading Automotive, Aerospace, Defence,
Power Generation and Transportation companies and their Supply chains use our products
and services daily. Working closely with our customers, to both fully understand their
requirements and feed their input into our development processes has significantly
contributed to our technology and industry knowledge.
Theorem Solutions is an independent UK headquartered company incorporated in 1990,
with sales and support offices in the UK and USA. Theorem has strong relationships with the
major CAD and PLM vendors, including; Autodesk, Dassault Systemes, ICEM Technologies (a
Dassault company), PTC, SolidWorks, Spatial Technology and Siemens PLM Software. These
relationships enable us to deliver best in class services and solutions to engineering
companies worldwide.
Theorem’s Product Suite
The 3DEXPERIENCE CATIA V6 to CREO translator is part of our Multi-CAD brand which is one
of 5 core Theorem brands which consist of:
CADverter
Direct translation of 3D data to or from an alternate CAD, Visualization
or Standards Based format
Multi-CAD
Interactive integration of non-native 3D data formats into the native
CAD system
Visualize 3D
Direct translation of 3D data for the purpose of Visualization
Multi-CAD v19.3 for 3DEXPERIENCE CATIA V6 - CREO
3 | P a g e ©Theorem Solutions 2016
Publish 3D
The creation of documents enriched with 3D content
Process Automation
Applications to automate any Data Exchange and collaboration
processes
The 3DEXPERIENCE CATIA V6 Bi-directional CREO Translator
The 3DEXPERIENCE CATIA V6 to CREO translator may be installed on a number of machines each accessing a central network-floating license. The 3DEXPERIENCE CATIA V6 to CREO Translator is a bi-directional direct database converter between the Dassault Systemes 3DEXPERIENCE CATIA V6 Modelling Application and PTC CREO file format. It enables the user to convert all forms of 3D Mechanical Design Geometry and Assembly data, together with system defined attribute information and colour information, between these two systems. This product is designed for companies using 3DEXPERIENCE who have selected CREO as a method of collaboration and communication between OEMs and their customers or suppliers. The translator can be invoked in either an interactive or batch mode.
Primary Product Features
Converts all types of geometry, wire frame, surfaces, trimmed surfaces (faces) and solid models.
Converts assembly structure between both systems.
Converts attribute data including colour and layer information.
Integrated with the 3DEXPERIENCE CATIA V6 installation.
The conversion process can be run Interactively or in Batch Mode
Data can be filtered by layer and entity type during processing. Geometry can be filtered and selectively processed.
Uses the 3DEXPERIENCE CATIA V6 API and PTC CREO Toolkit API to read and write data.
Multi-CAD v19.3 for 3DEXPERIENCE CATIA V6 - CREO
4 | P a g e ©Theorem Solutions 2016
Primary Product benefits?
Being a direct database converter all pre and post processing is eliminated, saving time.
Reduce costs due to processing time and increase overall conversion success levels by filtering input data and focusing the conversion to only those elements required.
Reduce costs and risks associated to accessing the wrong version of data by integrating the conversion process into a related business processes.
With over 20 years of industrial use Theorem translation products robustness and quality is well proven, reducing your business risk.
This document will focus specifically on guidance for the use of Multi-CAD for the 3DEXPERIENCE CATIA V6 – CREO product. For information regarding any of Theorem’s product ranges please contact [email protected]
Multi-CAD v19.3 for 3DEXPERIENCE CATIA V6 - CREO
5 | P a g e ©Theorem Solutions 2016
Getting Started
Documentation The latest copy of this documentation can be found on our web site at:
http://www.theorem.com/Documentation
Installation Media The latest copy of Theorem software can be found via our web site at:
http://www.theorem.com/Product-Release-Notes
Each product has a specific link to the Product Release Document, which contains a link to
the download location of the installation CD.
Alternatively, you can request a copy of the software to be shipped on a physical CD.
Installation The installation is run from the CD or ZIP file download provided.
To install the translator, select the Setup.exe file and follow the installation
process. For a full guide to the process, please see our ‘Translator Installation
Process’ demonstration video located here.
License Configuration In order for the translation to run successfully, the Theorem license file
provided to you needs to be configured using FlexLM. For a full guide to this
process, please see our ‘FlexLM License Set Up and Configuration’
demonstration video located here.
Running the Product Once configured and licensed, the product is ready to be run.
There are 2 distinct ways of running the translator:
Interactively from within 3DEXPERIENCE CATIA V6
o The Interactive Interface provides a direct method of importing and
exporting to and from 3DEXPERIENCE.
Multi-CAD v19.3 for 3DEXPERIENCE CATIA V6 - CREO
6 | P a g e ©Theorem Solutions 2016
In Batch via CATUtil - DataExchangePLMBatch
o The 3DEXPERIENCE DataExchangePLMBatch Interface provides a direct
method of invoking the translator. It can be used on an On Demand basis
to translate single or multiple files
Multi-CAD v19.3 for 3DEXPERIENCE CATIA V6 - CREO
7 | P a g e ©Theorem Solutions 2016
Using the Product
Translating Interactively from within 3DEXPERIENCE
The 3DEXPERIENCE CATIA V6 to CREO translator allows an opened 3DEXPERIENCE CATIA V6
part or Assembly to be exported directly to CREO, and for a CREO part or assembly to be
imported directly into the 3DEXPERIENCE CATIA V6 application.
In order to translate from within 3DEXPERIENCE CATIA V6, the 3DEXPERIENCE CATIA V6
application must be started using a Theorem environment, so that the appropriate Theorem
partner plug-ins are available. (See 3DEXPERIENCE CATIA V6 Environment files)
3DEXPERIENCE CATIA V6 can be started from a desktop shortcut created at installation time.
Theorem Interactive Conversion Settings The 3DEXPERIENCE interface offer a number of setting to enable configuration of the
Translation Process.
The method for altering these settings differs between 3DEXPERIENCE versions.
For R2013x, the User settings are accessed through the ‘Tools->Options’ menu:-
Multi-CAD v19.3 for 3DEXPERIENCE CATIA V6 - CREO
8 | P a g e ©Theorem Solutions 2016
for R2014x and later revisions these are accessed through the User Preferences options :-
Of importance for all versions is the Compatibility options page as shown here for R2013x:-
And here for R2014x, R2105x and R2016x:-
Multi-CAD v19.3 for 3DEXPERIENCE CATIA V6 - CREO
9 | P a g e ©Theorem Solutions 2016
This page sets the preferred mode of conversion (in this case Exact), and also the general
options “Convert coordinate systems” and “3D Annotation”.
Advanced User Options
There is not a dedicated User Options panel for the 3DEXPERIENCE CATIA V6 Bi-directional CREO Translator. There are, however, a number of options that can be specified via an Options file.
Import of CREO data - (%TS_INST%\data\proe\proe_xcad_opts.txt) Export of CREO data - (%TS_INST%\data\proe\xcad_proe_opts.txt) Each of the options in these files is described below:
1. proe_xcad_opts.txt
Option Description
Info Outputs extra processing information to the log files. Default is OFF
Option data file proe_xcad_opts.txt syntax:
info
Debug Outputs extra debugging information to the log file. Default is OFF
Option data file proe_xcad_opts.txt syntax:
debug
Edge to
nurbs
Read analytic curves in NURBS form. Default is OFF.
Option data file proe_xcad_opts.txt syntax:
edge_to_nurbs
Surf to nurbs
Read analytic surfaces in NURBS form. Default is OFF
Option data file proe_xcad_opts.txt syntax:
surf_to_nurbs
No Datum
Curves
To ignore the reading of Datum curves. Default is ON
o Option data file proe_xcad_opts.txt syntax:
no_datum_curves
Disable
default
colours
To disable read of default colours. Default is ON
o Option data file proe_xcad_opts.txt syntax:
disable_default_colours
Process
hidden
geometry
To enable the read of hidden geometry. Default is OFF
o Option data file proe_xcad_opts.txt syntax:
process_hidden_geom
Disable
Transfer
Solids
To disable read of Solids found in the Creo model.Default OFF
o Option data file proe_xcad_opts.txt syntax:
no_solids
Multi-CAD v19.3 for 3DEXPERIENCE CATIA V6 - CREO
10 | P a g e ©Theorem Solutions 2016
Disable
Transfer
Quilts
To disable the read of quilts in the Creo model. Default is OFF
o Option data file proe_xcad_opts.txt syntax:
no_quilts
Disable
Geometry
Check
To disable Creo Geometry checking. Default is OFF
o Option data file proe_xcad_opts.txt syntax:
no_check_geom
Read PMI To enable the read of PMI data in the CREO model. Default is OFF
o Option data file proe_xcad_opts.txt syntax:
read_pmi
o This option is also invoked via the User Preference ->
Compatibility -> External Formats:
“3D Annotation” – ON
Read
Assembly
level PMI
To enable the read of PMI data in the CREO model. Default is OFF
o Option data file proe_xcad_opts.txt syntax:
read_assy_pmi
o This option is also invoked via the User Preference ->
Compatibility -> External Formats:
“3D Annotation” – ON
Read PMI in
stroked form
To enable the read of PMI data in the CREO model. Default is OFF
o Option data file proe_xcad_opts.txt syntax:
write_stroked_pmi
o This option is also invoked via the User Preference ->
Compatibility -> External Formats:
“3D Annotation” – ON
2. xcad_proe_opts.txt Option Description
Info Outputs extra processing information to the log files. Default is OFF
o Option data file xcad_proe_opts.txt syntax:
info
Debug Outputs extra debugging information to the log file. Default is OFF
o Option data file xcad_proe_opts.txt syntax:
debug
Disable
Points Read
To disable the read of point entities from CATIA. Default is OFF
o Option data file xcad_proe_opts.txt syntax:
disable_points
Disable
Wireframe
Read
To disable the read of wireframe entities from CATIA. Default is OFF
o Option data file xcad_proe_opts.txt syntax:
disable_wireframe
Disable
Surfaces
Read
To disable the read of surfaces entities from CATIA. Default is OFF
o Option data file xcad_proe_opts.txt syntax:
disable_surfaces
Multi-CAD v19.3 for 3DEXPERIENCE CATIA V6 - CREO
11 | P a g e ©Theorem Solutions 2016
Disable
Solids Read
To disable the read of solid entities from CATIA. Default is OFF
o Option data file xcad_proe_opts.txt syntax:
disable_solids
Disable Axes
Read
To disable the read of Axis system entities from CATIA. Default is OFF
o Option data file xcad_proe_opts.txt syntax:
disable_axes
Read PMI
entities
To enable the read of PMI entities. Default is OFF
o Option data file xcad_proe_opts.txt syntax:
read_pmi
o This option is also invoked via the User Preference ->
Compatibility -> External Formats:
“3D Annotation” – ON
Reduce
Nurbs
complexity
To reduce NURBS surface complexity when writing into CREO. Default is OFF
o Option data file xcad_proe_opts.txt syntax:
reduce_nurbs
Write PMI
entities
To enable the write of PMI entities to CREO. Default is OFF
o Option data file xcad_proe_opts.txt syntax:
PMI
Multiple
Features On
To enable the grouping of multiple bodies into a single part. Default is OFF
o Option data file xcad_proe_opts.txt syntax:
MULTI_FEAT_ON
Theorem Export Once 3DEXPERIENCE CATIA V6 has been started it is possible for an opened product to be exported to CREO. V6 2013x V6 2014x and later
If 3DEXPERIENCE CATIA V6 R2013x is being used, in order to export, the user selects the PLMAccess -> Export option as shown here:-
Multi-CAD v19.3 for 3DEXPERIENCE CATIA V6 - CREO
12 | P a g e ©Theorem Solutions 2016
If 3DEXPERIENCE CATIA V6 R2014x or later is being used, the user selects the menu item as
shown here:-
This menu action will then present the user with a Save As dialog box similar to this:- For R2013x and R2014x:-
Multi-CAD v19.3 for 3DEXPERIENCE CATIA V6 - CREO
13 | P a g e ©Theorem Solutions 2016
For R2015x:-
For R2016x:
Multi-CAD v19.3 for 3DEXPERIENCE CATIA V6 - CREO
14 | P a g e ©Theorem Solutions 2016
The “Save as types:” or “Format” selection should be set to CREO_THEOREM (*.prt).
The Save or OK button can now be pressed to initiate the conversion to the selected output
file name and location.
Theorem Import Once 3DEXPERIENCE CATIA V6 has been started it is possible for a model to be imported from CREO. In order to import, the user selects the following Menu Option: For 3DEXPERIENCE CATIA V6 R2013x:-
For 2014x and later:-
Multi-CAD v19.3 for 3DEXPERIENCE CATIA V6 - CREO
15 | P a g e ©Theorem Solutions 2016
This launches the Theorem Import Menu: For R2013x and R2014x:-
For R2015x:-
For R2016x:-
Multi-CAD v19.3 for 3DEXPERIENCE CATIA V6 - CREO
16 | P a g e ©Theorem Solutions 2016
On selecting Open or OK the on the File selection Panel the CREO data will be translated and imported into the 3DEXPERIENCE CATIA V6 database. It will also be opened in the user’s session.
Multi-CAD v19.3 for 3DEXPERIENCE CATIA V6 - CREO
17 | P a g e ©Theorem Solutions 2016
Translating in Batch using CATUtil – PLMBatchDataExchange
The Dassault Systemes CATUTIL batch management tool can be launched with the correct
Theorem enabled environment using the scripts provided in the Translator installation at:
<installation_directory>\bin\start_CATUTIL_Theorem_Multi-CAD_CREO_CATIAV6R<revision>.cmd
(where [revision] should be substituted for the version of 3DEXPERIENCE that you have
installed – e.g. 2013x, 2014x, 2015x, 2016x)
The settings made in the user options page “MultiCAD CREO” described in the interactive
usage above, are also used in BATCH mode.
In some cases, it may be desirable to ignore the interactive settings while running in batch
mode.
This can be achieved by setting the following variable in the CATIA Environment being used:-
TS_IGNORE_CREO_CATSETTINGS=1
Batch Export to CREO Here is an example showing the appropriate settings in preparation for a database selection
and an export “save” or “run”:-
Note selection of “Export” operation, usage “CREO_THEOREM” and extension “prt”.
Batch Import from CREO
Here is an example showing the appropriate settings in preparation for an input CREO file
selection and an export “save” or “run”:-
Multi-CAD v19.3 for 3DEXPERIENCE CATIA V6 - CREO
18 | P a g e ©Theorem Solutions 2016
Note selection of “Import” operation, usage “CREO_THEOREM” and extension “prt”.
Log File Generation
Export process Log Files In the process of exporting the selected 3DEXPERIENCE CATIA V6 part or assembly, the
following log files are generated by the CREO Export plug-in.
The process log and error messages are recorded in a ‘.err’ file located in the 3DEXPERIENCE
CATIA V6 CATReport directory. The file is named after the active CATIA component.
e.g. %CATReport%\model1.err
Additional log files are created in the TSC_TEMP_DIR directory. This directory is defined in
the %TS_INST%\ts_env.bat file.
%TSC_TEMP_DIR%\Read_to_viewer_<input_part_name>.log
Where: <input_part_name> is the name of the input part (or the active part name in interactive usage) This contains information describing the 3DEXPERIENCE CATIA V6 'data read'
processing into Theorem Intermediate data format
%TSC_TEMP_DIR%\viewer_<part-name>_screen_output.log
Where <part-name> is the selected output file name This contains the screen output of the process of writing the data to CREO.
%TSC_TEMP_DIR%\viewer_<part-name>.log
Where <part-name> is the selected output file name This contains detailed process information of the write of the data to CREO.
Multi-CAD v19.3 for 3DEXPERIENCE CATIA V6 - CREO
19 | P a g e ©Theorem Solutions 2016
Import process Log Files In the process of importing a CREO file, the following log files are generated by the CREO
Import plug-in.
The process log and error messages are recorded in a ‘.err’ file located in the 3DEXPERIENCE
CATIA V6 CATReport directory. The file is named after the selected input file name. e.g. if the
file Mypart.prt were selected, the log file names would be %CATReport%\Mypart.err and
%CATReport%\Mypart.rpt.
%TS_TEMP_DIR%\ <input_file_name>_viewer.log
%TS_TEMP_DIR%\ <input_file_name>_viewer_screen_output.log
%CATReport%\<input_file_name>.err
Where <Input_file_name> - is the base file name of the imported file.
3DEXPERIENCE CATIA V6 Environment Files
As part of the Theorem installation process, a set of 3DEXPERIENCE CATIA V6 environment
files are created which are subsequently used in the launch of 3DEXPERIENCE and CATUtil
sessions to support the Theorem partner plug-ins for CREO import and export.
A ‘CATEnv’ file is created for each installed version of 3DEXPERIENCE CATIA V6.
These environment files are located in
<installation_directory>\B214\win_b64\Theorem_Multi-CAD_CREO_CATIAV6R2013x.txt
<installation_directory>\B216\win_b64\Theorem_Multi-CAD_CREO_CATIAV6R2014x.txt
<installation_directory>\B417\win_b64\Theorem_Multi-CAD_CREO_CATIAV6R2015x.txt
<installation_directory>\B418\win_b64\Theorem_Multi-CAD_CREO_CATIAV6R2016x.txt
Additional Information
There is occasionally an issue where the CADverter process does not end in a timely manner
after the conversion has finished. This seems to be connected to the ProEngineer ‘nmsd.exe’
process.
If you notice this behaviour, bring up the task manager, wait for a translation to finish, and if
the CADVerter status bar is still scrolling, kill the nmsd.exe process. This will immediately halt
the bar scrolling. This behaviour is also exhibited in CATIA “Insert Existing Component” as a
command prompt window remaining for some time after the geometry is displayed.
This nmsd.exe process is started indirectly via the Theorem translator dll and is controlled by
the parametric.psf file in the Creo Installation directory …\Parametric\bin , with a default
timeout value of 300 seconds.