user manual - download.p4c.philips.com€¦ · user manual thank you for ... macrovision...

3139 246 14652

DVD VIDEO PLAYER DVP4000

User manual

Thank you for choosing Philips.

Need help fast?Read your User’s Manual first for quick tips that make using your Philips product more enjoyable. If you have read your instructions and still need assistance, you may access our online help at www.philips.com/support

01-28 DVP4000_692 18/01/2005, 2:52 AM1

3139 246 14652

General Information

CAUTION(WARNING LOCATION: ON THEBOTTOM OF THE SET)

NEVER MAKE OR CHANGECONNECTIONS WITH THEPOWER SWITCHED ON.

Laser safety

This unit employs a laser. Due to possibleeye injury, only a qualified service personshould remove the cover or attempt toservice this device.

NOTE:PICTURES SHOWN MAYBEDIFFERENT BETWEENCOUNTRIES.

LASERType Semiconductor laser

GaAlAsWave length 650 nm (DVD)

780 nm (VCD/CD)Output Power 7 mW (DVD)

10 mW (VCD/CD)Beam divergence 60 degree

For Customer Use:

Read carefully the information located atthe bottom of your DVD VIDEO playerand enter below the Serial No. Retain thisinformation for future reference.

Model No. DVD VIDEO 4000Serial No. _______________

Environmental InformationAll unnecessary packaging has beenomitted. The packaging has been madeeasy to separate into three materials:cardboard (box), polystyrene foam(buffer) and polyethylene (bags, protectivefoam sheet).

Your DVD player consists of materialswhich can be recycled and reused ifdisassembled by a specialised company.Please observe the local regulationsregarding the disposal of packagingmaterials, exhausted batteries and oldequipment.

Important Note:Due to the numerous versions of newCD-Audio copy protection orenhanced CD-Audio protectionrecently available on certain discs,Philips is unable to guarantee thatthis DVD Player is fully compatiblewith such new discs. Should you havedifficulty playing any such CD-Audiodiscs, kindly refer them to your CD-Audio disc retailer.

01-28 DVP4000_692 18/01/2005, 2:52 AM2

3139 246 14652

3

En

gli

s hB

ahas

a M

elay

u

Due to the inconsistency of disc formatsprovided by various disc manufacturers, yourDVD system may require a playabilityenhancement or upgrade. As DVD technologyadvances, these enhancements will becomecommon and will be easy to complete.Go to www.philips.com/support forsoftware upgrade.

The apparatus shall not be exposed to drippingor splashing and that no objects filled withliquids, such as vases, shall be placed onapparatus.

Index

English --------------------------------------- 4

-------------------------------- 29

-------------------------------- 55

Bahasa Melayu --------------------------- 81

This product incorporates copyrightprotection technology that is protected bymethod claims of certain U.S. patents andother intellectual property rights owned byMacrovision Corporation and other r ightsowners. Use of this copyright protectiontechnology must be authorised byMacrovision Corporation, and is intendedfor home and other limited viewing usesonly unless otherwise authorized byMacrovision Corporation. Reverseengineering or disassembly is prohibited.

Manufactured under license from DolbyLaboratories. “Dolby” and the double-Dsymbol are trademarks of DolbyLaboratories.

01-28 DVP4000_692 19/01/2005, 11:09 AM3

3139 246 14652

En

glish

4

IntroductionSupplied accessories ....................................... 5Care and safety information .......................... 5

ConnectionsConnecting TV .............................................. 6-7

Using Composite Video jacks (CVBS) ........ 6Using Component Video jacks (Y Pb Pr) .. 6Using an accessory RF modulator .............. 7

Connecting the power cord .......................... 7Optional: Connecting to an Audio System ................................................................................ 8

Stereo system has Dolby Pro Logic or Right/ Left Audio In jack ......................................... 8

Optional: Connecting Digital AV Receiver ................................................................................ 8

Receiver has a PCM, Dolby Digital, orMPEG2 decoder .............................................. 8

Functional OverviewFront and Rear Panels .................................... 9Remote Control ............................................ 10

Getting StartedStep 1: Inserting batteries into theRemote Control ............................................ 11

Using the Remote Control to operate thePlayer ............................................................... 11

Step 2: Setting up the TV ........................ 11-12To deactivate Progressive manually .......... 11Selecting the color system that correspondsto your TV ...................................................... 12Setting the TV Display ................................. 12

Step 3: Setting language preference ........... 13Setting the OSD Language .......................... 13Setting the Audio, Subtitle and DVD menulanguage .......................................................... 13

Disc OperationsPlayable Discs ................................................. 14Region Codes ................................................. 14Playing discs ..................................................... 15Using Disc Menu ............................................ 15Basic playback controls ........................... 16-17

Pausing playback ............................................ 16Selecting track/chapter ................................ 16Resuming playback from the last stoppedpoint ................................................................ 16Zoom .............................................................. 16Repeat ............................................................. 16

Repeat A-B ..................................................... 16Slow Motion .................................................. 17Forward / Reverse Searching ..................... 17Preview ........................................................... 17

Special disc features ...................................... 17Selecting a Title ............................................. 17Camera Angle ................................................ 17Changing the Audio Language .................... 17Subtitles .......................................................... 17

Playing MP3/JPEG Picture CD ..................... 18General Operation ....................................... 18Playback selection ......................................... 18Repeat ............................................................. 18Zoom picture ................................................ 18Playback with multi-angles .......................... 18Scan Effect ...................................................... 18

DVD Menu OptionsLanguage .......................................................... 19

OSD Menu ..................................................... 19Audio, Subtitle, DVD Menu ........................ 19

Video Setup ............................................... 19-20TV Display ...................................................... 19TV Type ........................................................... 19Progressive – turning on/off ....................... 20

Audio Setup .............................................. 20-22Digital Output ............................................... 21LPCM Output ................................................ 21Night Mode - turning on/off ....................... 22

Rating .......................................................... 22-24Changing the Password ............................... 23Setting the Rating .................................. 23-24Restoring to original settings ..................... 24

Specifications ...................................... 25

Troubleshooting ......................... 26–27

Glossary ......................................................................28

Contents

01-28 DVP4000_692 18/01/2005, 2:52 AM4

3139 246 14652

En

gli

s h

5

Supplied accessories

Remote Controlandbattery (lithiumCR2025)

Introduction

Care and safety information● Power consumption

– When the system is switched toStandby mode, it is still consuming power.To disconnect the system from the powersupply completely, remove the AC powerplug from the wall jack.

● Avoid high temperatures, moisture,water and dust– Do not expose the player, batteries ordiscs to humidity, rain, sand or excessiveheat (caused by heating equipment ordirect sunlight.)

● Avoid condensation problem– The lens may cloud over when theplayer is suddenly moved from cold towarm surroundings, making it impossibleto play a disc. Leave the player in thewarm environment until the moistureevaporates.

● Do not block the vents– Do not operate the DVD Player in anenclosed cabinet, allow about 10 cm (4inch) of free space all around the playerfor adequate ventilation.

10 cm(4 inches)

10 cm(4 inches)

10 cm(4 inches)

PHILIPS

● Care of the cabinet– Use a soft cloth slightly moistened witha mild detergent solution. Do not use asolution containing alcohol, spirits,ammonia or abrasives.

● Finding a suitable location– Place the player on a flat, hard, andstable surface.

● Disc handling– To clean a CD, wipe it in astraight line from the centertowards the edge using a soft,lint-free cloth. A cleaningagent may damage the disc!– Write only on the printedside of a CDR(W) and only with a soft felt-tipped pen.– Handle the disc by its edge, do nottouch the surface.

CR 2025LITHIUM

VOLUME

Audio (white, red)cables /Video (yellow) cable

01-28 DVP4000_692 18/01/2005, 2:52 AM5

3139 246 14652

En

glish

6

Connections

Connecting TV

R COAXIAL VIDEO Y Pb PrL

AUDIO VIDEO

M

AUDIO IN

V (Pr/Cr)

U (Pb/Cb)

Y

S-VIDEOIN

VIDEO IN

COMPONENTVIDEO IN

AUDIO OUT

V (Pr/Cr)

U (Pb/Cb)

Y

S-VIDEOIN

VIDEO IN

COMPONENTVIDEO IN

12

IMPORTANT!– You only need to make one videoconnection from the followingoptions, depending on thecapabilities of your TV system.– Connect the DVD system directlyto the TV.

Using Composite Video jacks(CVBS)

1 Use the composite video cable (yellow) toconnect the DVD Player’s CVBS (VIDEO)jack to the video input jack (or labeled asA/V In, Video In, Composite or Baseband)on the TV (cable supplied).

2 To hear the sound of this DVD Playerthrough your TV, use the audio cables(white/red) to connect AUDIO OUT (L/R) jacks of the DVD Player to thecorresponding AUDIO IN jacks on the TV(cable supplied).


AUDIO VIDEO

AUDIO IN

V (Pr/Cr)

U (Pb/Cb)

Y

S-VIDEOIN

VIDEO IN

COMPONENTVIDEO IN

AUDIO OUT

V (Pr/Cr)

U (Pb/Cb)

Y

S-VIDEOIN

VIDEO IN

COMPONENTVIDEO IN

12

IMPORTANT!– Component Video connectionprovides higher picture quality. Thisoption must be available on your TV.– The progressive scan videoquality is only possible throughComponent Video (Y Pb Pr) output.

Using Component Video jacks(Y Pb Pr)

1 Use the component video cables (green/blue/red) to connect the DVD system’s YPb Pr jacks to the correspondingComponent video input jacks (or labeledas Y Pb Pr) on the TV (cable not supplied).

2 To hear the sound of this DVD Playerthrough your TV, use the audio cables(white/red) to connect AUDIO OUT (L/R) jacks of the DVD Player to thecorresponding AUDIO IN jacks on the TV(cable supplied).

01-28 DVP4000_692 18/01/2005, 2:52 AM6

3139 246 14652

En

gli

s h

7

Connections

IMPORTANT!– If your TV only has a singleAntenna In jack (or labeled as 75ohm or RF In,) you will need an RFmodulator in order to view the DVDplayback on the TV. See yourelectronics retailer or contact fordetails on RF modulator availabilityand operations.

Using an accessory RF modulator

1 Use the composite video cable (yellow) toconnect the DVD Player’s CVBS jack tothe video input jack on the RF modulator.

2 Use the RF coaxial cable (not supplied) toconnect the RF modulator to your TV’sRF jack.


AUDIO VIDEO

MAINS

AUDIO IN

R LVIDEO

INTO TVINT IN

CH3 CH4

2

1

RF coaxial cable to TV

Back of RF Modulator(example only)

Antenna orCable TV signal

VIDEO Y Pb Pr

VIDEO

MAINS

AUDIO IN

S-VIDEOIN

VIDEO IN

SCART/RGB IN

~ AC MAINS

AUDIO OUT

V (Pr/Cr)

U (Pb/Cb)

Y

S-VIDEOIN

VIDEO IN

COMPONENTVIDEO IN

After everything is connectedproperly, plug in the AC power cordto the power outlet.Never make or change any connectionswith the power switched on.

Connecting the power cord

01-28 DVP4000_692 18/01/2005, 2:52 AM7

3139 246 14652

En

glish

8

Connections

Stereo system has Dolby Pro Logicor Right / Left Audio In jack

1 Select one of the video connections(CVBS VIDEO IN or COMPONENTVIDEO IN) depending on the optionsavailable on your TV.

2 Use the audio cables (white/red) toconnect AUDIO OUT (L/R) jacks ofthe DVD Player to the correspondingAUDIO IN jacks on the stereo system(cable supplied).


AUDIO VIDEO

AUDIO IN

STEREO

DIGITAL

OPTICAL

Optional: Connecting to anAudio System

Optional: Connecting Digital AVReceiver

Receiver has a PCM, Dolby Digital,or MPEG2 decoder

1 Select one of the video connections(CVBS VIDEO IN or COMPONENTVIDEO IN) depending on the optionsavailable on your TV.

2 Connect the COAXIAL jack of the DVDPlayer to the corresponding Digital AudioIn jack on your Receiver (cable notsupplied).

3 Set the DVD Player’s Digital Output toPCM or ALL depending on the capabilitiesof your Receiver (see page 21 “DigitalOutput”).

Helpful Hint:– If the audio format of the Digital Outputdoes not match the capabilities of yourreceiver, the receiver will produce a strong,distorted sound or no sound at all.

R COAXIAL VIDEO Y Pb Pr

AUDIO VIDEO

MAINS

AUDIO IN

COAXIAL

OPTICAL AV Receiver

01-28 DVP4000_692 18/01/2005, 2:52 AM8

3139 246 14652

En

gli

s h

9

Functional Overview

Front and Rear Panels

Mains (AC Power Cord)– Connect to a standard AC outlet

YPbPr– Connect to YPbPr input of a TV

CVBS (VIDEO Out)– Connect to CVBS Video input of a TV


AUDIO VIDEO

MAINS

Audio Out (Left/Right)– Connect to AUDIO inputs of an amplifier,

receiver or stereo system

COAXIAL (Digital audio out)– Connect to coaxial AUDIO input of a

digital audio equipment

Caution: Do not touch the inner pins of the jacks on the rear panel.Electrostatic discharge may cause permanent damage to the unit.

POWER

STANDBY ON PLAY/PAUSE STOP

OPEN/CLOSE

POWER

IR

POWER B– To switch the DVD player to ON or OFF

/ (OPEN/CLOSE)– Open/Close the disc tray

9 STOP– To stop playback

2; PLAY/PAUSE– To start or interrupt playback

IR Sensor– Point the remote control towards this

sensor

ON LED– LED lights up when the power is on

STANDBY LED– LED lights up when the STANDBY mode

is on

01-28 DVP4000_692 18/01/2005, 2:52 AM9

3139 246 14652

En

glish

10

Functional Overview

Remote Control

VOLUME

RETURN / TITLE– To go back to previous menu /

show title menu

DISC MENU– Enters or exits the disc contents

menu– Switches on or off the playback

control mode (for VCDversion 2.0 only)

1 2 3 4– Selects an item in the menu/

fast backward/forward, slowforward/backward

OK– Acknowledge menu selection

S– To search or select previous

chapter or track

STOP ( 9 )– To stop playback

PLAY ( B )– To start playback

PAUSE ( ; )– To pause playback temporarily /

frame-by-frame playback

REPEAT– Selects various repeat modes

REPEAT (A-B)– Repeats playback of a specific

section on a disc

PREVIEW– To search chapter/track during

playback

VOLUME– Use 2/1 to increase/decrease

the volume– Disables or enables sound

output

B (STANDBY)– To switch the DVD player to

standby mode or ON

0-9 numerical key pad– Selects numbered items in a

menu

DISPLAY– Displays information on TV

screen during playback

SYSTEM MENU– Access or exit DVD Player’s

system menu

T– To search or select next

chapter or track

SUBTITLE– To access subtitle language in

disc menu

ANGLE– Selects a DVD camera angle

ZOOM– Enlarge or reduce a picture on

the TV screen

AUDIO– To access audio language in

disc menu

01-28 DVP4000_692 18/01/2005, 2:52 AM10

3139 246 14652

En

gli

s h

11

Getting Started

Step 1: Using the RemoteControl

1 2CR 2025LITHIUM

1 Pull out the plastic protective sheet.

2 To replace battery (Lithium CR2025);➜ pull out the battery compartment➜ replace a new battery and fully insertthe battery compartment back to theoriginal position.

3 Close the cover.

Using the Remote Control tooperate the Player

1 Aim the Remote Controldirectly at the remotesensor (iR) on the frontpanel.

2 Do not put any objectsbetween the RemoteControl and the DVDPlayer while operating theDVD Player.

CAUTION!– Remove batteries if they areexhausted or if the Remote Controlis not being used for a long time.– Batteries contain chemicalsubstances, so they should bedisposed properly.

Step 2: Setting up the TV

IMPORTANT!Make sure you have completed allthe necessary connections. (Seepage 6-7 “Connecting TV”).

1 Turn on the TV and set to the correctvideo-in channel. You should see the DVDbackground screen on the TV.

2 Usually these channels are between thelowest and highest channels and may becalled FRONT, A/V IN, or VIDEO. See yourTV manual for more details.➜ Or, you may go to channel 1 on yourTV, then press the Channel down buttonrepeatedly until you see the Video Inchannel.➜ Or, the TV Remote Control may have abutton or switch that chooses differentvideo modes.➜ Or, set the TV to channel 3 or 4 if youare using an RF modulator.

3 If you are using external equipment, (eg.audio system or receiver), turn it on andselect the appropriate input source forthe DVD Player output. Refer to theequipment owner’s manual for detail.

Y ON PLAPA

IR

VOLUME

To deactivate Progressive manually

● When the distorted picture stillappears on the TV, it may be due tothe connected TV does not acceptprogressive signals, and progressive is setby mistake. You must reset the unit tointerlace format.

1 Turn off your TV progressive scan modeor turn on to interlaced mode (refer toyour TV user manual.)

2 Press / (OPEN/CLOSE) on the DVDplayer to open the disc tray.

3 Press numeric keypad ‘1’ on theremote control for few seconds.➜ The DVD blue background screenwill appear on the TV.

01-28 DVP4000_692 18/01/2005, 2:52 AM11

3139 246 14652

En

glish

12

Selecting the color system thatcorresponds to your TV

This DVD Player is compatible with bothNTSC and PAL. In order for a DVD discto play on this Player, the color system ofthe Disc, the TV and the DVD Playershould match.

Language

TV Display

TV Type

Video Output

Progressive

Audio RatingVideo

4:3 PanScan

Multi NTSC

PAL

Multi

1 Press SYSTEM MENU.

2 Press 2 repeatedly to select {VIDEOSETUP}, then press OK.

3 Press 3 4 to highlight {TV TYPE}.

4 Enter its submenu by pressing OK.

5 Press 3 4 to highlight one of the optionsbelow:

PAL – Select this if the connected TV isPAL system. It will change the video signalof a NTSC disc and output in PAL format.

NTSC – Select this if the connected TVis NTSC system. It will change the videosignal of a PAL disc (VCD only) andoutput in NTSC format.

Multi – Select this if the connected TV iscompatible with both NTSC and PAL(multi-system). The output format will bein accordance with the video signal of thedisc.

6 Select an item and press OK.➜ Follow the instructions shown on theTV to confirm the selection (if any).➜ If a blank/distorted TV screen appears,wait for 15 seconds for auto recovery.

Getting Started

TIPS: To return to the previous menu, press OK.To remove the menu, press SYSTEM MENU.

Setting the TV Display

Set the aspect ratio of the DVD Playeraccording to the TV you have connected.The format you select must be availableon the disc. If it is not, the setting for TVdisplay will not affect the picture duringplayback.

Language

TV Display

TV Type

Video Output

Progressive

Audio RatingVideo

4:3 PanScan

Multi

4:3 PanScan

4:3 LetterBox

16:9


2 Press 2 repeatedly to select {VIDEOSETUP}, then press OK.

3 Press 3 4 to highlight {TV DISPLAY}.



4:3 PANSCAN –Select this if you havea normal TV and wantboth sides of the picture to be trimmedor formatted to fit your TV screen.

4:3 LETTERBOX –Select this if you have anormal TV. In this case, awide picture with blackbands on the upper and lower portions ofthe TV screen will be displayed.

16:9 – Select this ifyou have a wide-screen TV.

6 Select an item and press OK.

01-28 DVP4000_692 18/01/2005, 2:52 AM12

3139 246 14652

En

gli

s h

13

Step 3: Setting languagepreference

You can select your preferred languagesettings. This DVD Player willautomatically switch to the language foryou whenever you load a disc.

Setting the OSD Language

The On-screen language for the systemmenu will remain as you set it, regardlessof various disc languages.

Language

OSD Menu

Subtitle

Audio

DVD Menu

Audio RatingVideo

English

Off

English

English


2 Press 2 to select {LANGUAGE}, thenpress OK.

3 Press 3 4 to highlight {OSD MENU}.


5 Press 3 4 to select a language and pressOK.

Getting Started

Setting the Audio, Subtitle and DVDmenu language

You can choose your own preferredlanguage or soundtrack from audio,subtitles and DVD menu languages. If thelanguage selected is not available on thedisc, the disc’s default language will beused instead.

Language

OSD Menu

Subtitle

Audio

DVD Menu

Audio RatingVideo

English

Off

English

English


2 Press 2 to select {LANGUAGE}, thenpress OK.

3 Press 3 4 to highlight one of the optionsbelow at a time, then press OK.– ‘Subtitle’ (disc’s subtitles)– ‘Audio’ (disc’s soundtrack)– ‘DVD Menu’ (disc’s menu)

4 Press 3 4 to select a language and pressOK.

5 Repeat steps 3~4 for other languagesettings.


01-28 DVP4000_692 18/01/2005, 2:52 AM13

3139 246 14652

En

glish

14

Disc Operations

IMPORTANT!– Depending on the DVD or VIDEOCD, some operations may bedifferent or restricted.– Do not push on the disc tray orput any objects other than disc onthe disc tray. Doing so may causethe disc player malfunction.

Playable Discs

Your DVD Player will play:– Digital Versitile Discs (DVDs)– Video CDs (VCDs)– Digital Video Discs + Recordable

[Rewritable] (DVD+R[W])– Compact Discs (CDs)– MP3 discs, picture (JPEG) files

on CD-R(W).– JPEG/ISO 9660 format– Maximum 9 characters display.– Supported sampling frequencies:

32 kHz, 44.1 kHz, 48 kHz (MPEG-1)16 kHz, 22.05 kHz, 24 kHz (MPEG-2)

– Supported Bit-rates : 32~256 kbps(MPEG-1), 8~160 kbps (MPEG-2)variable bitrates

Helpful Hints:– It may not be possible to play CD-R/RWor DVD-R/RW in all cases due to the type ofdisc or condition of the recording.– Unfinalised discs should have the lastsession closed before playing.– If you are having trouble playing acertain disc, remove the disc and try adifferent one. Improper formatted disc willnot play on this DVD Player.

TIPS: The operating features described here might not be possible for certain discs. Always referto the instructions supplied with the discs.

Region CodesThis DVD Player is designed to supportthe Region Management System. Checkthe regional code number on the discpackage. If the number does not matchthe Player’s region number (see tablebelow), the Player may be unable toplayback the disc.

RegionRegion

number ofthe unit

Discs that canbe played(Example)

U.S.A. andCanada regions

U.K andEurope regions

Asia Pacificregions

Australia/Latamregion

1

2

3

ALL

4

ALL

ALL

ALL

1

2

3

4

China region 6 ALL 6

01-28 DVP4000_692 18/01/2005, 2:52 AM14

3139 246 14652

En

gli

s h

15

IMPORTANT!If the inhibit icon (ø) appears on theTV screen when a button is pressed,it means the function is not availableon the current disc or at the currenttime.

Playing discs

1 Connect the power cords of the DVDPlayer and TV (and any optional stereo orAV receiver) to a power outlet.

2 Turn on the TV power and set to thecorrect Video In channel. (See page 11“Setting up the TV”).

3 Press POWER B on the DVD Playerfront panel.➜ You should see the DVD backgroundscreen on the TV.

4 Press 0 (OPEN/CLOSE) button to openthe disc tray and load in a disc, then pressthe same button again to close the disctray.➜ Make sure the label side is facing up.For double-sided discs, load the side youwant to play facing up.

5 Playback will start automatically. If notpress PLAY B.➜ If a disc menu appears on the TV, see“Using the Disc Menu”.➜ If the disc is locked by parental control,you must enter your four-digit password.(See page 24).

6 At any time, simply press STOP to stopplayback.

Disc Operations

Using the Disc MenuDepending on the disc, a menu mayappear on the TV screen once you loadthe disc.

To select a playback feature or item● Use the 1 2 3 4 or numeric keypad

(0-9) on the Remote Control, then pressPLAY B to start playback.

To access or exit from the menu● Press DISC MENU on the Remote

Control.

For VCD with Playback Control(PBC) feature (version 2.0 only)

PBC playback allows you to play VideoCDs interactively, following the menu onthe display.

● In stop mode, use the numeric keypad(0-9) to select a track and PBC will turnoff.➜ Playback will start automatically

● During playback, press DISC MENU;➜ If PBC is ON, it will switch to OFF andcontinue playback.➜ If PBC is OFF, it will switch to ON andreturn to menu screen.

● During playback, pressing RETURN/TITLE will return to the menu screen (ifPBC is on).

01-28 DVP4000_692 18/01/2005, 2:52 AM15

3139 246 14652

En

glish

16

Disc Operations


Basic playback controlsUnless otherwise stated, all operationsdescribed are based on the use ofRemote Control.

Pausing playback(DVD/VCD/CD/MP3)

1 During playback, press PAUSE ;.➜ Playback will pause and sound will bemuted.

2 Press PAUSE ; again to select the nextpicture frame.

3 To return to normal playback, pressPLAY B.

Selecting track/chapter(DVD/VCD/CD)

1 Press T briefly during playback to goto the next chapter/track

2 Press S to go to the previous track orchapter.

3 To go directly to any chapter/track, enterthe chapter/track number using thenumerical keys (0-9).

Repeat (DVD/VCD)

● Press REPEAT continuously to choose aRepeat mode during playback.

REPEAT CHAPTER (DVD)– to repeat playback of the currentchapter.

REPEAT TITLE (DVD)– to repeat playback of the currenttitle.

REPEAT SINGLE (VCD)– to repeat playback of the currenttrack.

REPEAT ALL (VCD)– to repeat playback of all the disc.

OFF (DVD/VCD)– to cancel the repeat mode.

Helpful Hint:– REPEAT function is not available for VCD2.0 when PBC is on.

Repeat A-B (DVD/VCD/CD)

1 Press REPEAT A-B at your chosenstarting point.

2 Press REPEAT A-B again at your chosenend point.➜ The section will now repeat continuously.

3 To exit the sequence, press REPEAT A-B.

Zoom (DVD/VCD/JPEG)

Zooming allows you to enlarge or returnto original size of the video image duringplayback.

1 Press ZOOM repeatedly to increase orto return to the original size.

2 Press 1 2 3 4 to pan across the TVscreen.

Resuming playback from the laststopped point (DVD/VCD/CD)

Resume playback of the last five discs,even if the disc was removed from thePlayer.

● To memorise the last stop point, press B(STANDBY) button on the remotecontrol during playback.

● Press B (STANDBY) again to switch onthe player and the disc will play from thelast stop point.

● Press STOP 9 to cancel the resumemode.

01-28 DVP4000_692 18/01/2005, 2:52 AM16

3139 246 14652

En

gli

s h

17


Disc Operations

Forward / Reverse Searching(DVD/VCD/CD)

1 Press 1 2 during playback to select therequired speed: 2X, 4X, 8X or 16X(backward or forward).➜ Sound will be muted (DVD/VCD) orintermittent (CD).

2 To return to normal speed, press PLAY B.

Slow Motion (DVD/VCD)

1 Press 3 4 during playback to select therequired speed: 1/2, 1/4, 1/8 or 1/16(backward or forward).➜ Sound will be muted.

2 To return to normal speed, press PLAY B.

Preview (DVD/VCD)

The Time Search function allows you tostart playing at any chosen time on thedisc.

1 Press PREVIEW.

2 Use 2 keys to select an option.

3 Enter hours, minutes and seconds fromleft to right in the time edit box usingremote control numerical key pad.

For DVD➜ Time (example - 00:34:27)➜ Title/Chapter (example - 000/008)

For VCD➜ Track Search (example - 00:30:00)➜ Track (example - 001)

4 Press the OK key to confirm.➜ Playback starts from the selected timeon the disc.

Special DVD features

Selecting a title

Some DVDs may contain several titles. Ifthe disc has a title menu recorded on it,you can start playback from the selectedmovie title.

1 Press DISC MENU.➜ The disc title menu appears on the TVscreen.

2 Use 341 2 keys or numeric keypad(0-9) to select a title.

3 Press OK key to confirm.

Camera Angle

If the disc contains sequences recordedfrom different angle, this allows you toview picture from different angle.

● Press ANGLE repeatedly to selectdifferent desired angle.➜ Playback changes to the selected angle.

Changing the Audio Language

● Press AUDIO repeatedly to selectdifferent audio languages.

Subtitles

● Press SUBTITLE repeatedly to selectdifferent subtitle languages.

01-28 DVP4000_692 18/01/2005, 2:52 AM17

3139 246 14652

En

glish

18

Disc Operations


Repeat

● Press REPEAT repeatedly to accessdifferent ‘Play Mode’.

REPEAT SINGLE– to repeat playback of the current file.

REPEAT ALL– to repeat playback of all files in thedisc.

OFF– to cancel the repeat mode.

Zoom picture (JPEG)

● During playback, press ZOOM repeatedlyto display the picture with different scales.

● Use 1 2 3 4 to view the zoomed picture.

Playback with multi-angles (JPEG)

● During playback, press 3 4 1 2 to rotatethe picture on the TV screen.3: rotate the picture vertically by 180º4: rotate the picture horizontally by 180º1: rotate the picture anti-clockwise by 90º2: rotate the picture clockwise by 90º

Scan Effect (JPEG)

● Press ANGLE repeatedly to choosedifferent scan effect.➜ Various scan effect appears on the topleft hand corner on the TV screen.

Playback selection

During playback, you can;

● Press S / T to select another file inthe current folder.

● Use 1 2 3 4 on the remote to rotate/flipthe picture files.

● Press ; / B repeatedly to pause/resumeplayback.

Playing MP3/JPEG Picture CD

This player can playback MP3, JPEG, orPicture CD files on a personally recordedCD-R/RW disc or commercial CD.

IMPORTANT!You have to turn on your TV and set tothe correct Video In channel. (See page11 “Setting up the TV”).

General Operation

1 Load a disc.➜ The playback will start automatically.

● Press STOP to display disc menu on theTV screen.

2 Use 3 4 to select the folder and pressOK to open the folder.

JPEG 6/103

Images

8. image 8

9. image 9

10. image 10

11. image 11

12. image 12

13. image 13

14. image 14

1. image 1

2. image 2

3. image 3

4. image 4

5. image 5

6. image 6

7. image 7

MP3 1/10

MP3

8. music 8

9. music 9

10. music 10

1. music 1

2. music 2

3. music 3

4. music 4

5. music 5

6. music 6

7. music 7

3 Press 3 4 or use the numeric keypad(0-9) to highlight an option.

4 Press OK to confirm.

01-28 DVP4000_692 18/01/2005, 2:52 AM18

3139 246 14652

En

gli

s h

19

DVD Setup Menu Options


This DVD Player setup is carried out viathe TV, enabling you to customise theDVD Player to suit your particularrequirements.

Language


2 Press 2 to select {LANGUAGE}.


Language

OSD Menu

Subtitle

Audio

DVD Menu

Audio RatingVideo

OSD Menu

This menu contains various languageoptions for display language on the screen.For details, see page 13.

Audio, Subtitle, DVD Menu

These menus contain various languageoptions for audio, subtitle and DVD menuwhich may be recorded on the DVD disc.For details, see page 13.

Video Setup


2 Press 2 repeatedly to select {VIDEO}.


Language

TV Display

TV Type

Video Output

Progressive

Audio RatingVideo

TV Display

This menu contains the options forsetting the aspect ratio of the DVD Playeraccording to the connected TV. For details,see page 12.

TV Type

This menu contains the options forselecting the color system that matchesthe connected TV. For details, see page 12.

01-28 DVP4000_692 18/01/2005, 2:52 AM19

3139 246 14652

En

glish

20



Progressive – turning on/off

This feature is only applicable if you haveconnected this DVD Player to aProgressive Scan TV through the Y Pb Prjacks (see page 6).

Language

TV Display

TV Type

Progressive

Audio RatingVideo

4:3 PanScan

Multi

Off On

Off

1 In ‘VIDEO SETUP’, press OK to enter thesubmenu.

2 Press 3 4 to highlight {PROGRESSIVE},then press OK.


ONTo enable Progressive Scan function.

OFFTo disable Progressive Scan function.

4 Select an item and press OK.➜ Follow the instructions show on the TVto confirm the selection (if any).➜ If a blank/distorted TV screen appears,wait for 15 seconds for auto recovery.

Audio Setup


2 Press 2 repeatedly to select {AUDIOSETUP}.


Language

Digital Output

LPCM Output

Night Mode

Audio RatingVideo

01-28 DVP4000_692 18/01/2005, 2:52 AM20

3139 246 14652

En

gli

s h

21



Digital Output

Set the Digital output according to youroptional audio equipment connection.

Language

Digital Output

LPCM Output

Night Mode

Audio RatingVideo

PCM

All

Off

PCM

48Khz

On

1 In ‘AUDIO SETUP’, press OK to enterthe submenu.

2 Press 3 4 to highlight {DIGITALOUTPUT}, then press OK.


OFFTurn off the digital output.

ALLIf you have connected your DIGITALAUDIO OUT to a multi-channel decoder/receiver.

PCMOnly if your receiver is not capable ofdecoding multi-channel audio.


Helpful Hint:– If DIGITAL OUTPUT is set to ‘All’, allaudio settings except MUTE are invalid.

LPCM Output

If you connect the DVD Player to a PCMcompatible receiver via the digitalterminals, such as coaxial or optical etc,you may need to adjust ‘LPCM Output’.Discs are recorded at a certain samplingrate. The higher the sampling rate, thebetter the sound quality.

Language

Digital Output

LPCM Output

Night Mode

Audio RatingVideo

48Khz

96Khz

PCM

48Khz

On


2 Press 3 4 to highlight {LPCM Output},then press OK.


48kHzPlayback a disc recorded at the samplingrate of 48kHz.

96kHzPlayback a disc recorded at the samplingrate of 96kHz that can only be achieved inStereo-Classic mode.


Helpful Hint:– LPCM Output can be selected only whenPCM is activated.

01-28 DVP4000_692 18/01/2005, 2:52 AM21

3139 246 14652

En

glish

22



Night Mode - turning on/off

In this mode, the high volume outputs aresoftened and low volume outputs arebrought upward to an audible level. It isuseful for watching your favourite actionmovie without disturbing others at night.

Language

Digital Output

LPCM Output

Night Mode

Audio RatingVideo

On

Off

PCM

48Khz

On


2 Press 3 4 to highlight {Night Mode}, thenpress OK.


ONSelect this to level out the volume. Thisfeature is only available for movies withDolby Digital mode.

OFFSelect this when you want to enjoy thesurround sound with its full dynamicrange.


Rating


2 Press 2 repeatedly to select {RATING}.


Language

Old Password

New Password

Confirm Password

Rating

Factory Default

Audio RatingVideo

01-28 DVP4000_692 18/01/2005, 2:52 AM22

3139 246 14652

En

gli

s h

23



Changing the Password

The same password is used for bothParental Control. Enter your four digitpassword when prompted on the screen.The default password is 0000.

1 In ‘RATING’, press OK to enter thesubmenu.

2 Use the numeric keypad (0-9) to enteryour old four-digit password.➜ When doing this for the first time, keyin ‘0000’.➜ If you forget your old four-digitpassword, key in ‘0000’.

3 Enter the new four-digit password.

4 Enter the new four-digit password asecond time to confirm.➜ The new four-digit password will nowtake effect.

Language

Old Password

New Password

Confirm Password

Rating

Factory Default

Audio RatingVideo

8. Adult

Reset


Setting the Rating

Some DVDs may have a parental levelassigned to the complete disc or tocertain scenes on the disc. This featurelets you set a playback limitation level.The rating levels are from 1 to 8 and arecountry dependent. You can prohibit theplaying of certain discs that are notsuitable for your children or have certaindiscs played with alternative scenes.


2 Press 3 4 to highlight {RATING}, thenpress OK to select a rating level for thedisc inserted.➜ To disable rating controls and to playall discs, select {8 ADULT}.

3 Use the numeric keypad (0-9) to enterthe four-digit password (see page 23“Changing the password”).➜ DVDs that are rated above the levelyou selected will not play unless you enteryour four-digit password.

Helpful Hints:– VCD, CD have no level indication, soparental control function has no effect onthese type of discs. This applies to most illegalDVD discs.– Some DVDs are not encoded with arating though the movie rating may beprinted on the Disc cover. The rating levelfeature does not work for such Discs.

01-28 DVP4000_692 18/01/2005, 2:52 AM23

3139 246 14652

En

glish

24

TIPS: To return to the previous menu, press 1.To remove the menu, press SYSTEM MENU.


Rating explanations

1 KID SAFE– Kids material; recommended especially forchildren and viewers of all ages.

2 G– General Audience; recommended as acceptablefor viewers of all ages.

3 PG– Parental Guidance suggested.

4 PG13– Material is unsuitable for children under age 13.

5-6 PG-R– Parental Guidance - Restricted; recommendedthat parents restrict children under 17 fromviewing or allow to view only when supervised bya parent or adult guardian.

7 NC-17– No children under age 17; not recommendedviewing for children under age 17.

8 ADULT– Mature material; should be viewed only byadults due to graphic sexual material, violence orlanguage.

Restoring to original settings

Setting the ‘Default’ function will reset alloptions and your personal settings to thefactory defaults and all your personalsettings will be erased.


2 Press 3 4 to highlight {DEFAULT}, thenselect {RESET}.

3 Press OK to confirm.➜ All settings will now reset to factorydefaults.

01-28 DVP4000_692 18/01/2005, 2:52 AM24

3139 246 14652

En

gli

s h

25

TV STANDARD (PAL/50Hz) (NTSC/60Hz)Number of lines 625 525Playback Multistandard (PAL/NTSC)

VIDEO PERFORMANCEDA Converter 10 bit, 54mHzVideo Output 1Vpp — 75 ohmYPbPr Output 0.7 Vpp — 75 ohm

AUDIO FORMATDigital MPEG compressed Digital

PCM 16, 20, 24 bitsfs, 44.1, 48, 96 kHz

MP3(ISO 9660) 96, 112, 128, 256kbps & variablebit rate fs, 32, 44.1,48 kHz

Analog Sound StereoDolby Surround compatible downmix from Dolby Digitalmulti-channel sound

Specifications

AUDIO PERFORMANCEDA Converter 24 bit, 192 kHzDVD fs 96 kHz 4Hz- 44kHz

fs 48 kHz 4Hz- 22kHzCD/VCD fs 44.1kHz 4Hz- 20kHzSignal-Noise (1kHz) > 80 dBDynamic range(1kHz) > 80 dBCrosstalk (1kHz) > 90 dBDistortion/noise (1kHz) 80 dBMPEG MP3 MPEG Audio L3

CONNECTIONSYPbPr Output Cinch 3xVideo Output Cinch (yellow)Audio Output(L+R) Cinch (white/red)Digital Output 1 coaxial

IEC60958 for CDDA / LPCMIEC61937 for MPEG 1/2,Dolby Digital

CABINETDimensions (w x h x d) 223.50 x 47 x 219.20 mmWeight Approximately 0.85 kg

POWER CONSUMPTIONPower Supply Rating 110 – 240 V;

50/60 HzPower consumption 12 WPower consumption in Standby mode < 2 W

Specifications subject to change without prior notice

01-28 DVP4000_692 18/01/2005, 2:52 AM25

3139 246 14652

En

glish

26

WARNINGUnder no circumstances should you try to repair the system yourself, as this willinvalidate the warranty. Do not open the system as there is a risk of electric shock.

If a fault occurs, first check the points listed below before taking the system for repair.

Problem Solution

No power – Check if the AC power cord is properly connected.– Press the STANDBY ON on the front of the DVD

system to turn on the power.

No picture – Refer to your TV’s manual for correct Video Inchannel selection. Change the TV channel until yousee the DVD screen.

– Check if the TV is switched on.

Distorted picture – Sometimes a small amount of picture distortion mayappear depending on the disc being played back. Thisis not a malfunction.

Completely distorted picture or – Connect DVD Player directly to the TV.black/white picture with DVD – Make sure the disc is compatible with the DVD/

Player.– Ensure that the DVD Player’s TV Type is set to match

that of the Disc and your TV.

No sound or distorted sound – Adjust the volume.– Check that the speakers are connected correctly.

No audio at digital output – Check the digital connections.– Check if your receiver can decode MPEG-2 or DTS

and if not, please make sure the digital output is setto PCM.

– Check if the audio format of the selected audiolanguage matches your receiver capabilities.

Disc can’t be played – The DVD+R/CD-R must be finalised.– Ensure the disc label is facing up.– Check if the disc is defective by trying another disc.– If you have recorded a Picture CD or MP3 CD

yourself, ensure that your disc contains at least 10pictures or 5 MP3 tracks.

– Region code incorrect.

Picture freezes momentarily – Check the disc for fingerprints/scratches andduring playback clean with a soft cloth wiping from centre to edge.

Troubleshooting

Visit us at www.philips.com/support for service support

01-28 DVP4000_692 18/01/2005, 2:52 AM26

3139 246 14652

En

gli

s h

27

No return to start-up screen when – Reset the unit by switching the player off, then ondisc is removed again.

The player does not respond to – Aim the Remote Control directly at the sensorthe Remote Control on the front of the player.

– Reduce the distance to the player.– Replace the batteries in the Remote Control.– Re-insert the batteries with their polarities (+/–

signs) as indicated.

Buttons do not work – To completely reset the player, unplug the ACcord from the AC outlet for 5-10 seconds.

Player does not respond to some – Operations may not be permitted by the disc.operating commands during playback. Refer to the instructions of the disc jacket.

DVD Player cannot read – Use a commonly available cleaning CD/DVD toCDs/DVDs clean the lens before sending the DVD Player for

repair.

Menu items cannot be selected – Press STOP twice before selecting System Menu.– Depending on the disc availability, some menu items

cannot be selected.

Troubleshooting

Problem Solution

Visit us at www.philips.com/support for service support

01-28 DVP4000_692 18/01/2005, 2:52 AM27

3139 246 14652

En

glish

28

Analog: Sound that has not been turned intonumbers. Analog sound varies, while digital sound hasspecific numerical values. These jacks send audiothrough two channels, the left and right.Aspect ratio: The ratio of vertical and horizontalsizes of a displayed image. The horizontal vs. verticalratio of conventional TVs. is 4:3, and that of wide-screens is 16:9.AUDIO OUT Jacks: Jacks on the back of the DVDSystem that send audio to another system (TV, Stereo,etc.).Bit Rate: The amount of data used to hold a givenlength of music; measured in kilobits per seconds, orkbps. Or, the speed at which you record. Generally,the higher the bit rate, or the higher the recordingspeed, the better the sound quality. However, higherbit rates use more space on a Disc.Chapter: Sections of a picture or a music piece on aDVD that are smaller than titles. A title is composedof several chapters. Each chapter is assigned a chapternumber enabling you to locate the chapter you want.Component Video Out Jacks: Jacks on the back ofthe DVD System that send high-quality video to a TVthat has Component Video In jacks (R/G/B, Y/Pb/Pr,etc.).Disc menu: A screen display prepared for allowingselection of images, sounds, subtitles, multi-angles, etcrecorded on a DVD.Digital: Sound that has been converted intonumerical values. Digital sound is available when youuse the DIGITAL AUDIO OUT COAXIAL orOPTICAL jacks. These jacks send audio throughmultiple channels, instead of just two channels asanalog does.Dolby Digital: A surround sound system developedby Dolby Laboratories containing up to six channelsof digital audio (front left and right, surround left andright, center and subwoofer).JPEG: A very common digital still picture format. Astill-picture data compression system proposed by theJoint Photographic Expert Group, which features smalldecrease in image quality in spite of its highcompression ratio.

MP3: A file format with a sound data compressionsystem. “MP3” is the abbreviation of Motion PictureExperts Group 1 (or MPEG-1) Audio Layer 3. By usingMP3 format. one CD-R or CD-RW can contain about10 times as much data volume as a regular CD can.Parental Control: A function of the DVD to limitplayback of the disc by the age of the users accordingto the limitation level in each country. The limitationvaries from disc to disc; when it is activated, playbackwill be prohibited if the software’s level is higher thanthe user-set level.PCM (Pulse Code Modulation): A system forconverting analog sound signal to digital signal forlater processing, with no data compression used inconversion.Playback control (PBC): Refers to the signalrecorded on video CDs or SVCDs for controllingreproduction. By using menu screens recorded on aVideo CD or SVCD that supports PBC, you can enjoyinteractive-type software as well as software having asearch function.Progressive Scan: It displays all the horizontal linesof a picture at one time, as a signal frame. This systemcan convert the interlaced video from DVD intoprogressive format for connection to a progressivedisplay. It dramatically increases the verticalresolution.Region code: A system for allowing discs to beplayed back only in the region designated beforehand.This unit will only play discs that have compatibleregion codes. You can find the region code of yourunit by looking on the product label. Some discs arecompatible with more than one region (or ALLregions).Title: The longest section of a picture or musicfeature on DVD, music, etc., in video software, or theentire album in audio software. Each title is assigned atitle number enabling you to locate the title you want.VIDEO OUT jack: Jack on the back of the DVDSystem that sends video to a TV.

Glossary

01-28 DVP4000_692 18/01/2005, 2:52 AM28

user manual - download.p4c.philips.com€¦ · user manual thank you for ... macrovision...

Documents