user manual hr-630 en -asuka car tv
TRANSCRIPT
-
8/16/2019 User Manual HR-630 En -ASUKA Car TV
1/44
Model: HR-630
CONNECTED Car TV Diversity
Receiver
User Manual
-
8/16/2019 User Manual HR-630 En -ASUKA Car TV
2/44ASUKA HR-630 User Manual 2
Please read all information in this manual thoroughly. Familiarize yourself with the capabilities and the usage of your
appliance before attempting to operate or maintain this unit. Taking a minute to do this now will help to prevent any
damages or loss in the future.
Keep this manual handy as a reference for operating procedures and safety information.
Do not insert any kind of irrelevant objects into this device through the openings as they may touch dangerous
voltage points that could result in the fire or electric shock.
Avoid placing this unit near the liquids since it could result in the electric shock. Furthermore, the liquid
splashes could damages the device and might cause smoke and overheat.
Always submit yourself into the safe driving rules and follow all traffic regulation. If you experience any
difficulties while operating the system or reading the monitor display, please stop your car and make any
necessary adjustment.
The Safety
Do not attempt to install or service your device on your own. Installation or serving by the people without
proper training and experience in the electronic equipment and the automotive accessories may be
dangerous and could lead into the risk of the electric shock or the other hazards.
If the receiver does not work properly, please disconnect the power plug for your safety and contact your
local dealer immediately for further technical support.
If any solid objects or liquids fall into the cabinet, please disconnect the unit and make it checked by the
qualified person before operating it any further.
Do not install the in-car DVB-T/T2 receiver where it may
obstruct the driver’s vision,
impair with the performance of any vehicle’s operating system or the head unit, and
impair with the driver’s ability to safely operate the vehicle.
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK – DO NOT REMOVE COVER (OR BACK)NO USER-SERVICEABLE PARTS INSIDE REFER SERVICINGTO QUALIFIED SERVICE PERSONNE;
The lighting flash with arrowhead symbol within anequilateral triangle is intended to alert the user to thepresence of uninsulated dangerous voltage within theproduct’s enclosure that may be of sufficient magnitude toconstitute a risk at electric shock to persons.
The exclamation point within an equilateral triangle isintended to alert the user to the presence of importantoperating and maintenance (servicing) instructions in theliterature accompanying the appliance
-
8/16/2019 User Manual HR-630 En -ASUKA Car TV
3/44ASUKA HR-630 User Manual 3
Table of Contents
Product Introduction ........................................................................................................... 4
I. Unit Overview ................................................................................... 5
I.1 Front Side ........................................................................................................................................... 5
I.2 Rear Side ............................................................................................................................................ 6
I.3 Remote Control Operations ............................................................................................................. 7
I.4 Home Menu ........................................................................................................................................ 8
II. Installation & Configuration Guide ......................................................... 9
II.1 I/O Overview.................................................................................................................................... 10
II.2 Antenna Connection ....................................................................................................................... 12
II.3 Smart phone Connectivity ............................................................................................................. 14
II.4 Operating HR-630 from Steering Wheel Control(SWC) ........................................................... 16
II.5 Touch control with Tier-1 Head Units .......................................................................................... 20
II.6 When having multiple external AV devices ................................................................................ 23
III. Quick Guide for First-time User ........................................................... 24
III.1 TV Watching ................................................................................................................................... 24
III.2 TV Recording ................................................................................................................................. 26
III.3 Smart phone connection .............................................................................................................. 27
III.4 MOVIE Watching ........................................................................................................................... 28
III.5 MUSIC Listening............................................................................................................................ 29
IV. TV Mode ........................................................................................ 30
IV.1 TV Menu ......................................................................................................................................... 30
IV.1.1 CH List (Channel List) .................................................................................................. 30IV.1.2 Audio ............................................................................................................................... 31
IV.1.3 CH Info.(Channel Information) .................................................................................... 31
IV.1.4 Auto Search ................................................................................................................... 32
IV.1.5 Channel Manager ......................................................................................................... 32
IV.1.6 Display ............................................................................................................................ 33
IV.1.7 TV Setting....................................................................................................................... 33
V. MOVIE Mode ................................................................................... 35
VI. MUSIC Mode ................................................................................... 36
VII. Radio Mode .................................................................................... 37
VIII. System Setting ................................................................................ 38
VIII.1 Country/Language ......................................................................................................... 38
VIII.2 Display ............................................................................................................................. 38
VIII.3 Monitor Port Setting....................................................................................................... 38
VIII.4 Steering Wheel Control (SWC) Learning ................................................................... 39
VIII.5 HDMI Setting .................................................................................................................. 41
VIII.6 Antenna Power Setting ................................................................................................. 41
VIII.7 Version / Upgrade .......................................................................................................... 41
VIII.8 Reset Default .................................................................................................................. 41
IX. Trouble Shooting Q&A ...................................................................... 42
X. Specification................................................................................... 44
-
8/16/2019 User Manual HR-630 En -ASUKA Car TV
4/44ASUKA HR-630 User Manual 4
Product Introduction
ASUKA HR-630 is designed for users to access terrestrial DVB-T2 TV broadcasting services
recently emerging in many countries. With its state-of-the-art TV signal reception performance and
AV codec processing techniques, HR-630 promises to deliver users an easy access of local HD
DVB-T2 TV programs as well as enhanced HD media player functions over existing multimedia
features.
Besides, HR-630 provides unique features and capability to make it more fun and convenient for
in-car information & entertainment experience. They are:
1. Smart phone connectivity: It’s an easy & convenient to feed the smart phone contents intothe head-unit. Either iOS or Android mobile devices are supported.
2. Steering wheel control: For cars equipped with steering wheel control features, after a very
simple learning procedure, one can designate any 5 keys to perform the function of CH+, CH1,
ENTER, EXIT, and TV LIST respectfully. The use of steering wheel control keys for HR-630
operation control can significantly ease the operation complexity and make HR-630 extremely
suitable for in-car applications.
3. Providing both CVBS and RGB TV output: In addition to CVBS output, HR-630 also
provides optional RGB (progressive) TV output that is the expected video format by several
well-known head unit with the RGB TV output, HR-630 is capable of inter working with an even
wider range of head units in the market..
-
8/16/2019 User Manual HR-630 En -ASUKA Car TV
5/44ASUKA HR-630 User Manual 5
I. Unit Overview
I.1 Front Sid e
(1) AV in : audio/video signal input port for external
devices connection such as DVD, GPS etc.
(2) CCD in : video input port for external CCD camera device connection
(3) DVR in : designated port for integration with ASUKA driving recorder.
(4) HDMI in : HDMI signal input port for mobile phone connection.
(5) Charging USB port : with DC +5V output for battery charging of mobile devices.
(6) USB port : for USB stick or external hard disk connection to perform
multimedia playback, TV recording, or software upgrade.
(7) Operating LED : the LED light to indicate whether the system is working or not
(8) Power LED : the LED light to indicate whether the power has been actively
supplied to the device or not.
1 3 57
4 6 82
-
8/16/2019 User Manual HR-630 En -ASUKA Car TV
6/44ASUKA HR-630 User Manual 6
I.2 Rear Side
(9) Antenna in : antenna input port (NOTE : the unit provides +5V phantom
power through RF signal pin.)
(10) HDMI out : HDMI signal output port
(11) Video out : CVBS video output ports
(12) Audio out : Audio left/right sound output ports
(13) Monitor Port*1 : with RGB output signal and UART/IR control interface for
advanced integration with 2-Din headunits(14) Power/SWC/IR Port*2 : with 12V/24V, ACC & GND car power inputs, steering wheel
button signal inputs and IR control interface
*1, See chapter II.1 for more information
*2, See chapter II.2 for more information
9
10
11
12
13
14
-
8/16/2019 User Manual HR-630 En -ASUKA Car TV
7/44ASUKA HR-630 User Manual 7
I.3 Remote Con trol Operat ions
No Button name Function
1 POWER Select the power-on or stand-by2 SRC
Select a video source from
DTV/AV1/CCD/DVR
3 HOME Go to the home screen
4 MENU Enter the setup menu
5 CH▲ Select the channel up or move the cursor
up
6 VOL Select the volume up or move the cursor
7 CH▼ Select the volume up or move the cursor
right
8 FF Fast Forward
9 TV LIST TV Program List
10 ENTER To enter the selected item
11 EXIT Exit the current setup
12 VOL Select the volume down or move the cursor
left
13 OKSelect the highlighted item or select
play/pause
14 FR Fast Rewind
15 REC●
-Start to record the TV/Radio program or
exit the recording
- Subtitle key in the normal operation mode
If the battery power in the remote controller becomes low, please follow the steps below to replace
a new battery:
1. Slightly push the battery case from the down to the up and pull out the battery case from the
remote control.
2. Replace the original battery with the new one.
3. Insert back the battery and the case into the remote control.
Remote Control Battery Installation
[1]
[2]
[3]
[4]
[5]
[6]
[7]
[8]
[9]
[10]
[11]
[12]
[14]
[13]
[15]
-
8/16/2019 User Manual HR-630 En -ASUKA Car TV
8/44ASUKA HR-630 User Manual 8
I.4 Home Menu
This is the home menu screen. From here, you can access
repestively the TV mode, LINK mode for smart phone
connection, Movie mode for video playback, Music mode for
music playback mode, RADIO mode, DVR mode, AV mode
and Setting mode for system settings.
1. Use [VOL ] and [VOL ] buttons to highlight the desired
mode.
2. Press [OK] button to enter the desired mode.
TV Mode
To enter the DTV mode.
Smart phone Link Mode
To enter the link mode and operate the smartpone
connectivity.
Movie Playback Mode
To enter the playback mode and watch the movie files.
Music Playback Mode
To enter the audio playback mode and listen to the music.
Radio Playback Mode
To enter radio playback mode and listen to Radio
broadcasting.
DVR Mode
To enter the driving recorder mode and watch the real
time video.
AV Mode
To select the AV output sourcing.
System Settings
To configure the device settings.
Note: Press the [HOME] key to go back to the home screen anytime.
Press the [SOURCE] key to switch the AV source anytime.
-
8/16/2019 User Manual HR-630 En -ASUKA Car TV
9/44ASUKA HR-630 User Manual 9
II. Ins tal lat ion & Con f igurat ion Guid e
The HR-630 provides three different kinds of video output ports: AV OUT, HDMI, and Monitor Port
- Configuration overview
HR-630
Contents Sources
available at each
HR-630 output port
CONNECTED Car TV Diversity
Receiver
Smart phone link AV 1/AV2
Driving Recorder USB devices
Input devices
AV OUT
(CVBS signal)
Monitor Port
(RGB signal)
HDMI Port:
TV
USB
Smartphone
TV
USB
TV
USB
Smartphone
DVR
AV1/AV2
https://www.google.com.tw/url?sa=i&rct=j&q=&esrc=s&source=images&cd=&cad=rja&uact=8&ved=0CAcQjRxqFQoTCNnAnoGO2MgCFcGMlAodhO0Iuw&url=https://pixabay.com/en/usb-disk-disc-storage-technology-47552/&psig=AFQjCNFmvK0laBB2qCe4ouk51nEh8V4bOA&ust=1445673039916288https://www.google.com.tw/url?sa=i&rct=j&q=&esrc=s&source=images&cd=&cad=rja&uact=8&ved=0CAcQjRxqFQoTCNnAnoGO2MgCFcGMlAodhO0Iuw&url=https://pixabay.com/en/usb-disk-disc-storage-technology-47552/&psig=AFQjCNFmvK0laBB2qCe4ouk51nEh8V4bOA&ust=1445673039916288https://www.google.com.tw/url?sa=i&rct=j&q=&esrc=s&source=images&cd=&cad=rja&uact=8&ved=0CAcQjRxqFQoTCNnAnoGO2MgCFcGMlAodhO0Iuw&url=https://pixabay.com/en/usb-disk-disc-storage-technology-47552/&psig=AFQjCNFmvK0laBB2qCe4ouk51nEh8V4bOA&ust=1445673039916288https://www.google.com.tw/url?sa=i&rct=j&q=&esrc=s&source=images&cd=&cad=rja&uact=8&ved=0CAcQjRxqFQoTCNnAnoGO2MgCFcGMlAodhO0Iuw&url=https://pixabay.com/en/usb-disk-disc-storage-technology-47552/&psig=AFQjCNFmvK0laBB2qCe4ouk51nEh8V4bOA&ust=1445673039916288
-
8/16/2019 User Manual HR-630 En -ASUKA Car TV
10/44ASUKA HR-630 User Manual 10
II.1 I/O Overv iew
Power/SWC/IR Port
1 Ground (black wire). Connect this cable to the vehicles chassis ground.
2 - Reverse status (orange wire). Connect this cable to the reverse gear to see the
image of the rear view camera image on the front monitor.
- Keep the cable grounded if the reverse mode is not enabled.
3 +12 ~ 24 V DC input (yellow wire). Connect this cable to (+) pole of the battery4 Steering In 2 (green wire). Plug in the cable to the SWC output wire 2.
5 ACC (red wire). Connect this cable to the ACC ignition of your vehicle.
6 IR (Infrared) LED power. Power for the LED of the IR receiver.
7 Steering In 1 (Blue wire). Plug in the cable to the SWC output wire 1.
8 IR (Infrared) data input. Infrared data of the IR receiver.
9 IR (Infrared) power. Power of the IR LED.
10 IR ground. Ground for the IR LED.
Steering In
Steering In 2
-
8/16/2019 User Manual HR-630 En -ASUKA Car TV
11/44ASUKA HR-630 User Manual 11
Monitor Port
1 UART TX output
2 UART RX input
3 Csync output
4 Ground
5 RGB_B (Video output)
6 Ground
7 RGB_R (Video output)
8 RGB_G (Video output)
DVR Port
1 Ground
2 Reserved
3 CVBS video input
4 Audio input
5 IR data output
6 UART RX input
7 +12V ACC output
8 UART TX output
9 +12V battery output
10 Reserved
UART_RX
Ground
Ground
RGB_G
Mini USB
UART_T
Csync
RGB_B
RGB_R
-
8/16/2019 User Manual HR-630 En -ASUKA Car TV
12/44ASUKA HR-630 User Manual 12
II.2 An tenna Connectio n
In-car digital TV reception situation will vary from vehicle to vehicle and the installer may need
to try anetnna mounting positions to determine the best position for most stable signal reception in
vehicles.
Important Notes on Antenna Installation:
For a better reception, please place the rod antenna horizontally, and keep the rod antenna away
from metals.
Antenna Position
To optimize the TV reception performance, we recommend that one antenna is mounted at the front
and one at the rear of the vehicle. Please refer to the diagram below for some recommended
locations.
(1) Behind the Front Bumper. Note: Please make sure the bumper is not made of metal
(2) Top of the Front Windscreen, but at least 5cm away from the metal body of the car
(3) Top of the Rear Windscreen, but at least 5cm away from the metal body of the car
(4) Bottom of the Rear Windscreen, at least 5cm away from the metal body of the car
(5) Behind the Rear Bumper (note: make sure rear bumper is not made of metal)
*Noted: For position (2) ~ (4), because the windshields of many cars are usually equipped with film coating
(that contains metal), the actual signal reception may be degraded, depending on the amount of the metal
embedded within the film.
1 2 3 4 5
-
8/16/2019 User Manual HR-630 En -ASUKA Car TV
13/44ASUKA HR-630 User Manual 13
Antenna Cable Routing
Once a suitable position of antenna placement is found, carefully route the antenna cables to the
receiver unit and then connect to the Antenna Inputs on DTV receiver.
-
8/16/2019 User Manual HR-630 En -ASUKA Car TV
14/44ASUKA HR-630 User Manual 14
II.3 Smart p hone Con nect iv i ty
If you are like most people these days, you’ve made your smartphone the source for Youtube,
Google Map, and any other Internet information surfing.
To answer the increasing demand of Internet access within a car via smartphone, HR-630 provides
an efficient way to connect your smartphone to the head unit display on car monitor.
Connect your smart phone to the HDMI input port of HR-630. Different interconnection cable should
be used for iOS and Android devices, respectifully, as illustrated below:
iOS device : Lightning HDMI adaptor HDMI cable HDMI IN port of HR-630
device.
Android device: MHL cable HDMI IN port of HR-630 device.
Configuration:
-
8/16/2019 User Manual HR-630 En -ASUKA Car TV
15/44ASUKA HR-630 User Manual 15
After proper interconnection cable is well installed, please enter the home menu as shown below.
Select LINK mode and press [OK] button to execute smart phone connection.
If the connection is successfully activated, the mirroring image of smart phone will become also
available on car monitor as shown in the below:
Set up the connection
-
8/16/2019 User Manual HR-630 En -ASUKA Car TV
16/44ASUKA HR-630 User Manual 16
II.4 Operating HR-630 from Steering Wheel Contr ol (SWC)
Most car models provide easy and convenient operation
control of in-car entertainment devices (ex. AM/FM
radio and/or media player) through the use of Steering
Wheel Control (SWC) buttons. Typical SWC buttons
offered originally, if any, are such as CH+, CH-, VOL+,
VOL-. To provide users further enhanced convenience,
HR-630 has been designed to support steering wheel
control buttons to allow users change the TV to
adjacent channel or any desired TV channels promptly. Operation is Quick and No hassle!
Here is a brief summary how HR-630 works to achieve this operational convenience.
(1) 5 major TV function keys from steering wheel control are supported in HR-630. They are: TV
LIST , Channel up(CH+), Channel down (CH-), ENTER, and EXIT.
Tell HR-630 Which is Which: First, users shall go to SETTING mode as explained in the
following paragraph to “teach” HR-630 which button on your steering wheel would be
assigned to which function. Note that the correspondence could be arbitrary. However, to
avoid unexpected results, the following SWC buttons shall NOT be used for these function
assignments: VOL+, VOL-, MOD.
(2) Use CH+/CH- button to change to adjacent TV channel.
(3) One may first pop up the entire TV List by pressing TV LIST button and then navigate to otherdesired channel by using CH+ or CH- button.
Steering wheel
Control signals
2-Din head unitSteering Wheel
ASUKA Car-TV Receiver
AV SIGNAL
2 ~ 3 wires,15V max(GND, output_1,& output_2)
Operation Overview
Note: The HR-630 can detect the SWC
output voltage level from 0.2V ~ 15V.
-
8/16/2019 User Manual HR-630 En -ASUKA Car TV
17/44ASUKA HR-630 User Manual 17
The steering wheel control signals available from most car models are usually consisted of 2 or 3
wires. Generally speaking, when one press a particular SWC button, a specific voltage will be
presented at one and/or 2 wires to “ inform ” the peripheral devices (ex. TV receiver) that a SWC
button has been asserted. The TV receiver can therefore interpret the voltage and perform the
corresponding action (CH+, CH-, ENTER, EXIT, TV LIST or nothing) in accordance with function
asserted.
The above-mentioned theories of operation are conceptually illustrated in the above wiring diagram.
1. The designated inputs of Power/IR port for SWC signals are Power GND (Black wire), Steering
In 1 (Blue wire), and Steering In 2 (Green wire).
2. Connection diagram is as follows:
SWC GND Power GND;SWC output wire 1Steering In 1(Blue wire); and
SWC output wire 2 Steering in 2 (Green wire).
System Configuration for SWC Control
-
8/16/2019 User Manual HR-630 En -ASUKA Car TV
18/44ASUKA HR-630 User Manual 18
Since a car will have its own unique output voltage for each SWC button, a learning procedures to
make HR-630 becomes familiar with the specific SWC signal becomes necessary. This following
pictures will describe the steps required to achieve the SWC learning for 5 major TV function keys.
1. Start Steering Wheel Control Learning:1.1 Back to Main Menu
1.2 Enter Setting Mode and select Steering Control
Learning
2. Learning Channel up (CH+) Key:2.1 Select the “CH+ Key Learning”
2.2 Press the button of SWC designated for [CH+]
3. Learning Success
The “Success” message will pop up when HR-630
successfully gets the key of SWC.
4. Learning Channel Down (CH-) Key:
4.1 Select the “CH- Key Learning”
4.2 Press the button of SWC designated for [CH-]
5. Learning ENTER Key:
5.1 Select the “OK Key Lerning”
5.2 Press the button of SWC designated for [OK]
6. Learning EXIT Key:
6.1 Select the “EXIT Key Learning”
6.2 Press the button of SWC designated for [EXIT]
How to set up SWC learning
-
8/16/2019 User Manual HR-630 En -ASUKA Car TV
19/44ASUKA HR-630 User Manual 19
7. Learning TV LIST Key:
7.1 Select the “TV LIST Key Learning”
7.2 Press the button of SWC designated for [TV LIST]
-
8/16/2019 User Manual HR-630 En -ASUKA Car TV
20/44ASUKA HR-630 User Manual 20
II.5 Tou ch contr ol w ith Tier-1 Head Units
HR-630 provides advanced integration with tier-1 2-Din head units. This integration allow users to
operate HR-630 not only through remote controller but also through the touch screen and/or the
remote controller of the head unit. Below table is listed to summarize the head unit models that
HR-630 can support and the available methods to control TV functions after integration.
Supported Model Available methods to control HR-630 after integration
SONY Touch screen control, ASUKA remote control
Kenwood Touch screen control, Kenwood remote control, ASUKA remote control
JVC Touch screen control, JVC remote control, ASUKA remote control
To enable the function of touch control operation, a specific installation way for different headunit is
required. For instance, the different interconnection cable is requested for each specific headunit to
connect with HR-630. The installation guide for each supported head units is summarized as below
for reference.
Configuration :
Video connection : Plug the SONY interconnection cable to the Monitor port on HR-630, and
insert the other side to Navigation port on SONY head unit.
Audio Connection : Plug audio L/R RCA cable to AV L/R Out on HR-630 and insert the other side
to AUX IN on SONY head unit.
Audio L/R Output
SONY interconnection cable
SONY Head Unit
Audio L/R RCA cable
Monitor port
-
8/16/2019 User Manual HR-630 En -ASUKA Car TV
21/44ASUKA HR-630 User Manual 21
System Setting at HR-630 :
At HR-630, follow the steps:
HOME->Setting->Monitor Port Setting, and enter
the function of Supported Model.
Press [OK] to enter option selection. Select
SONY(XAV65) or SONY(Others) upon the
headunit under integration.
System Setting at SONY head unit :
In SONY head unit, everytime, when you intend to
change current application source to watch TV,
please be sure that the following steps are done
accordingly.
Step 1: Go to the HOME MENU of the head unit.
Step 2: Enter AUX mode and return back to
HOME MENU.
IMPORTANT NOTICE : The TV so und can not successfu l ly output through SONY headuni t i f Step2 is skip ped.
Step 3: Enter Navigation and then TV screen will show up.
*Note: Navigation icon of SONY head unit will not appear on screen unless the interconnection
cable is plugged.
To integrate KENWOOD/JVC head unit, please adopt KENWOOD/JVC interconnection cable for
the integration. The configuration is same as SONY head unit.
System Setting at HR-630 :
1. Before the operation on KENWOOD/JVC head unit,
please find another standard monitor first with CVBS
video input fuction. Connect the CVBS output of
HR-630 to CVBS input of that monitor and make
system setting on it.
2. At HR-630, follow the steps:
HOME->Setting->Monitor Port Setting, and enter the
function of Supported Model.
Press [OK] to enter option selection. Select JVC(V41BT) or KENWOOD upon the headunit
under integration.
KENWOOD/JVC Head Unit
-
8/16/2019 User Manual HR-630 En -ASUKA Car TV
22/44ASUKA HR-630 User Manual 22
System setting at KENWOOD/JVC head unit :
At KENWOOD or JVC head unit, everytime, when
you intend to change current application source to
watch TV, please be sure that the following steps
are done accordingly.
Step 1: Go to the HOME MENU of the head unit.
Step 2: Enter AUX and return back to HOME
MENU.
IMPORTANT NOTICE : The TV sound c an not su ccess ful ly
output th rough h eaduni t i f Step2 is skipped.
Step 3: Enter Navigation and then TV screen will
show up.
• KENWOOD 2-DIN
• JVC 2-DIN
-
8/16/2019 User Manual HR-630 En -ASUKA Car TV
23/44ASUKA HR-630 User Manual 23
II.6 When having mult ip le external AV devic es
HR-630 serves an excellent way to integrate multiple external AV devices such as rear CCD
camera, driving recorder (DVR) and other AV devices simultaneously into your car entertaining
system. The following is to explain how to configure external AV sources with HR-630.
1. Connect rear CCD camera to the CCD IN, Driving recorder into DVR IN, and/or any additional
AV source to the stanadrd AV inputs as shown below:
2. Enter the AV mode at Home Menu, then one may
access the desired AV source by selecting the AV1,
AV2 or AV3 option to switch between video
sources.
-
8/16/2019 User Manual HR-630 En -ASUKA Car TV
24/44
ASUKA HR-630 User Manual 24
III. Quic k Guid e for Firs t-t ime User
III.1 TV Watching
Step 1: Turn on the unit
1. Turn on the vehicles ACC or IGN. (or start the vehicle)
2. When the unit is powered, the POWER LED indicator show below will illuminateRED.
3. When the system is activated, the Operating LED on the unit will illuminate Green.
Step 2: Highlight the “TV” option to enter the TV mode. After that, the screen of
“Setup Wizard” will show up.
Operating LED
Power LED
-
8/16/2019 User Manual HR-630 En -ASUKA Car TV
25/44
ASUKA HR-630 User Manual 25
Step 3: Set your located country, prefered
OSD language, Summer Time and LCN option.
NOTE: Time zone setting will be automatically
updated once the Region setting is changed.
Step 4: Perform auto search to find available
TV channels.
1. Select “Start” on Setup Wizard and press OK to active it.
2. The device will show "Scan screen" as below and perform searching the
available TV channels in your area
Step 5: Good Job! You can now sit back and enjoy your mobile TV.
NOTE: Press the [OK] button to change the aspect ratio of the current TV program.
-
8/16/2019 User Manual HR-630 En -ASUKA Car TV
26/44
ASUKA HR-630 User Manual 26
III.2 TV Reco rd ing
1. While watching TV, press [REC] to start recording
TV programs. The timer menu will appear on the
lower left screen. This timer menu will disappear
automatically when no operation is performed
within 10 seconds.
2. Select favorite recording time on timer menu and
press [OK] to start the recording. icon will
appear on the left upper screen. The information
of current recording time will be shown beside the
icon.
NOTE:
a. Please ensure that a USB Storage device is
connected to the unit before recording.
b. While turn off the ACC/IGN, the unit will
continue recording until recording time is
finished. The unit will automatically turn off
while the recording is finished.
3. You can simply call the timer menu out with press [REC] again.
4. To stop recording, please select the STOP option
on timer menu.
5. Recorded TV programs can be played back in
MOVIE mode.
Imp ortant notes:
i. A recorded program will be stored in a default folder named “ PVR ”. The file
name will have “.TSV” file extention for recorded TV program.
ii. The file will be named as:
"Channel Name(RecordedDate_RecordedTime)”
iii. Maximum file size of FAT/FAT32 is 4 GB, if the file exceeds this size, the system
will creat a new file to continue the recording.
iv. 1 GB storage can be used to save recorded program for approximately 45
-
8/16/2019 User Manual HR-630 En -ASUKA Car TV
27/44
ASUKA HR-630 User Manual 27
minutes.
v. Storage system can support FAT/FAT32/NTFS formats.
vi. Generally all USB 2.0 flash drive can be used as storage devices. However,
there are cases happening that the USB flash drive can’t succesffuly store
recorded programs. So, before recording, i t’s strongly suggested to first format
the USB storage device by PC or laptop
WARNING! Please do not edit the “*.PLT” & “RECORD.TMP” files on your disk.
Modifying/deleting this file will cause error on recorded file.
III.3 Smart p hone connect ion
The section below will explain how to configure the smart phone devices with
HR-630.
1. Please connect your smart phones or smart devices with HR-630 by appropriate
interconnection cable. The detailed connection instruction please refer to Chap II.3 .
2. After the interconnection cable is well installed, please
enter the screen of HR-630 home menu. Select LINK
mode and press [OK] button to execute smart phone
connection.
3. If the smart phone connectivity is successfully
activated, the mirroring image of smart phone will
show on car monitor like the example shown as right
picture.
-
8/16/2019 User Manual HR-630 En -ASUKA Car TV
28/44
ASUKA HR-630 User Manual 28
III.4 MOVIE Watch ing
The section below will explain how to quickly play a video file stored on USB device.
1. Press the [Home] button to get back to thehome screen. Select “Movie” section toward
next setting.
NOTE: Make sure that your USB device has
been plugged into the receiver’s USB port,
otherwise this function cannot be used.
2. The available video files will list on screen.
Select the desired file and press [OK] to
start playing the video.
NOTE: Only video files will show under this
mode. Music files will not.
3. To stop movie play, press [EXIT] button toreturn.
NOTE :
1. Press the [FR] / [FF] button to increase or decrease the speed of track.
2. Press the [PLAY/PAUSE] button to pause or resume the movie playing.
3. Press the [REC ] button to delete the highlighted file/folder.
-
8/16/2019 User Manual HR-630 En -ASUKA Car TV
29/44
ASUKA HR-630 User Manual 29
III.5 MUSIC L istenin g
The section below will explain how to quickly play a
music file stored on USB device.
1. Press the [Home] button to get back to the
home screen. Select “Music” section toward
next setting.
NOTE: Make sure that your USB device has
been plugged into the receiver’s USB port, otherwise this function can not be
used.
2. The available music files will list on screen.
Select the desired file and press [OK] to start
playing the music.
NOTE: Only video files will show under this
mode. Music files will not.
3. To stop music play, press [EXIT] button to return.
NOTE :
1. Press the [FR] / [FF] button to increase or decrease the speed of track2. Press the [PLAY/PAUSE] button to pause or resume music playing.
3. Press [REC] button to delete highlighted file/folder.
-
8/16/2019 User Manual HR-630 En -ASUKA Car TV
30/44
ASUKA HR-630 User Manual 30
IV. TV Mode
IV.1 TV Menu
Enter TV mode first, and then press the
[MENU] button to make TV menu appear. Bynavigating the different options, you can have the
access to the channel list, audio settings,
channel info, auto search, channel management,
display setting and the subtitle through setting
menu.
IV.1.1 CH Lis t (Channel Lis t)
To display channel information, to preview the program, and to access the
Electronic Program Guide (EPG)
a. CH List
1. Select “Channel List” in the TV menu
and press the [OK] button. The
“Channel List” will appear on the
screen.
NOTE: you can also press the [EPG]
button to enter “ Channel List” while
enjoy watching TV.
2. Scroll up/down the channel list to
preview the program.
3. Press the [EXIT]/[MENU] button to exit.
b. Schedule
1. Press the [VOL] button to enter the
schedule
2. Scroll up/down the date list to see
program schedule of the corresponding
date.
3. Press the [VOL] button to see the
program schedule.
4. Scroll up/down the program schedule
to see the previous/next program on the selected date.5. Press the [VOL] button to return back to the date list.
6. While in program schedule list, press the [OK] button to see more information of
-
8/16/2019 User Manual HR-630 En -ASUKA Car TV
31/44
ASUKA HR-630 User Manual 31
the selected program.
7. Press the [EXIT]/[MENU] button to return to the “Channel List”.
c. Program Information
1. Select one of the desired TV channel
schedule and press the [OK] button.
2. The program information will appear
and describe the selected channel.
3. Press the [EXIT]/[MENU] to return to
the “Schedule”.
IV.1.2 Audio
To select either master or secondary language as well as the audio channel of
current service
1. Highlight the “Audio” option on TV menu
screen.
NOTE: you can also press the [AUDIO]
button to enter the “Audio” while enjoying
TV.
2. Select the stereo/left/right audio channel
and scroll the available language. Press
the [OK] button to select the language.
3. Press the [EXIT]/[MENU] key to exit.
IV.1.3 CH Info .(Chann el Inform ation )
Provide the information of the current service’s system parameters and the
signal information
1. Highlight the channel information option.
NOTE: you can also press the [INFO]
button to enter “Channel Information”
while enjoying TV.
2. Press the [OK] button to display the
channel information.
3. Press the [EXIT]/[MENU] button to exit.
-
8/16/2019 User Manual HR-630 En -ASUKA Car TV
32/44
ASUKA HR-630 User Manual 32
IV.1.4 Au to Search
To re-search the available channels automatically
1. Highlight the “Automatic Search” option.
NOTE: you can also press the [AUTO
SCAN] button to enter the “AutomaticChannel Search” while enjoying TV.
2. Press the [OK] button to restart the channel
search again. The previous TV channels
will be deleted automatically if this function
is executed.
IV.1.5 Channel Manager
To rearrange and to edit the TV channel listing using skip, move, and delete
functions
1. Select “Channel” in the TV Menu and press
the [OK] button. The channel manager
screen will appear as the picture on the
right.
2. Scroll up/down the channel list to enter the
editing menu for the chosen channel.
3. Press [EXIT]/[MENU] button to exit anytime.
Skip a Channel
1. After entering the channel editing menu, select the “SKIP” visual-button on
screen.
2. Press the [OK] button to activate or deactivate it.
NOTE: this function temporari ly removes the channel from the program list. The users
can restore the channels by deactivating the function.
Channel Movement
1. After entering the channel editing menu, select the “MOVE” visual-button on
screen.
2. Move the channel up or down in the list.
3. Press the [OK] button to save the new listing.
Channel Delete
1. After entering the channel editing menu, select the “DELETE” visual-button on
-
8/16/2019 User Manual HR-630 En -ASUKA Car TV
33/44
ASUKA HR-630 User Manual 33
screen.
2. Press the [OK] button to delete the channel.
NOTE: this function will permanent ly delete the channel from the current program list.
Users will only restore the previous channels back by performing the auto search again.
IV.1.6 Display
To set up and adjust the image with
preference.
1. Highlight the item you want to adjust.
2. Press the [OK] button to activate it.
IV.1.7 TV Settin g
To configure the subtitle, teletext, and antenna power setting
III.1.7.1 Subtitle : to active or deative the subtitle function
1. Select the “Subtitle” option on TV menu
screen.NOTE: you can also press the [REC]
button to enter the “Subtitle” while
enjoying TV.
2. Scroll the available language to activate
the subtitle.
3. Press the [EXIT]/[MENU] key to exit
III. 1.7.2 Teletext : to enter the teletext menu
1. Select the “Teletext” option on TV menu.
NOTE: you can also press the [TTX] button to enter the “Teletext” menu while
enjoying TV.
2. Press the [CH] button to view the next page or the [CH] to view the
previous teletext page.
3. Press the numerical key button to jump to the specific teletext page.
4. Press the [MENU]/[EXIT] to leave.
-
8/16/2019 User Manual HR-630 En -ASUKA Car TV
34/44
ASUKA HR-630 User Manual 34
III.1.7.3 Antenna power : to set up the antenna power
1. Select the “Ant.Power” option on TV menu
to enter “ Antenna Power ” menu.
2. Press the [OK] button to select the power.
Note: if the power is “on”, it means that the
antenna will have +5V to empower the
signal. We suggest to keep this antenna
power on to have a better signal reception.
3. Press the [MENU]/[EXIT] button to exit.
-
8/16/2019 User Manual HR-630 En -ASUKA Car TV
35/44
ASUKA HR-630 User Manual 35
V. MOVIE Mode
In the Movie Menu, the users can adjust the playing mode, repeat mode, aspect
ratio, audio, and the subtitle.
1. Press the [MENU] to enter “Menu”.
2. Highlight the item you want to adjust.3. Select one by pressing the [OK] button or exit
the setting by pressing the [EXIT]/[MENU]
button.
4. Press the [EXIT]/[MENU] button to exit the
“Movie Menu”.
Movie Menu Options Result
Playing ModeOff Video file will be played according to the video list
Shuffle The next vIdeo file will be played randomly
Repeat Mode
Repeat –OFF The device will stop, right after playing one video file
Repeat –OneThe device will repeat one video file that is currently
being played continuously.
Repeat –DirThe device will repeat all of the video files in one
directory that is currently being played continuously.
Aspect RatioFull Screen The video picture will be displayed in full screen
NoneThe video picture will be displayed according to the
video picture ratio
Audio
Stereo Sound will come out from both left&right speakers
Left Sound will come out only from left speaker
Right Sound will come out only from right speaker
Subtitle Languages Choose one of the available subtitles.
-
8/16/2019 User Manual HR-630 En -ASUKA Car TV
36/44
ASUKA HR-630 User Manual 36
VI. MUSIC Mode
First, please select the “music” symbol at
the start screen menu. After the music has
already played, please press the [MENU] button
to invoke the music menu. Through this menu,
the users can adjust the palying mode, and therepeat mode.
1. Highlight the item you want to adjust.
2. Select one by pressing the [OK] button or exit the setting by pressing the
[EXIT]/[MENU] button.
3. After adjusting, press the [EXIT]/[MENU] button to exit.
Music Menu Options Result
Playing ModeOff Music file will be played according to the music list
Shuffle Music file will be played randomly
Repeat Mode
Repeat –OFF The device will stop, right after playing one music file
Repeat –OneThe device will repeat one music file that is currently
being played continuously.
Repeat –DirThe device will repeat all of the music files in one
directory that is currently being played continuously.
-
8/16/2019 User Manual HR-630 En -ASUKA Car TV
37/44
ASUKA HR-630 User Manual 37
VII. Radio Mode
Enter the radio section, The section below will
explain how you could select preferred radio
broadcasting and enjoy the function.
The operation of radio function is shown below:
1. Channel List: Select your preferred radio stations.
2. EPG: To show EPG (Electronic program guide) information about current radio.
3. Current channel: Show the frequency of present channel that you selected.
4. Volume Up: Turn up the voice by pressing or press [Vol+]
5. Volume Down: Turn down your voice by pressing or press [Vol-]
-
8/16/2019 User Manual HR-630 En -ASUKA Car TV
38/44
ASUKA HR-630 User Manual 38
VIII. Sys tem Setting
This is the system settings menu screen. The
users can adjust the country/language setting,
display setting, HDMI setting, reset default,
and proceed to a software upgrade. Use the[VOL] and the [VOL] buttons to highlight
the desired item and press the [OK] button to
enter one item.
VIII.1 Countr y/Language
To set up the OSD language and regional settings
1. Highlight the item you want to adjust.
2. Select one option by pressing the the[OK] button or exit the setting by
pressing the [EXIT]/[MENU] button.
3. After adjusting, press the [EXIT]/[MENU]
button to exit the “Country/Language”
menu.
VIII.2 Disp lay
To set up and adjust the image with preference.
1. Highlight the setting that you want to
adjust.
2. Select one by pressing the [OK] button
or exit the setting by pressing the
[EXIT]/[MENU] button.
3. After adjusting, press the [EXIT]/[MENU]
button to exit the “Display” menu.
VIII.3 Monit or Por t Setting
To set up the monitor types for
integration.
1. Press [OK] button or exit the setting by
pressing the [EXIT]/[MENU] button.
2. After adjusting, press the [EXIT]/[MENU]
button to exit the “Monitor Port Setting”menu.
-
8/16/2019 User Manual HR-630 En -ASUKA Car TV
39/44
ASUKA HR-630 User Manual 39
VIII.4 Steering Wheel Con tro l (SWC) Learni ng
To achieve the SWC learning for 5 major TV function keys, CH+ and CH-, ENTER,
EXIT and TV LIST. The procedure to perform SWC learning is summarized as
shown below. Before SWC learning, please make sure the connecton wires
betweeb SWC signal and HR-630 are well connected.
1. Start Steering Wheel Control Learning:
1.1 Back to Main Menu
1.2 Enter Setting Mode and select Steering Control
Learning
2. Learning Channel up (CH+) Key:
2.1 Select the “Up Key Learning”
2.2 Press the button of SWC designated for [CH+]
3. Learning Success
The “Success” message will pop up when HR-630
successfully gets the key of SWC.
4. Learning Channel Down (CH-) Key:
4.1 Select the “CH- Key Learning”
4.2 Press the button of SWC designated for [CH-]
5. Learning ENTER Key:
5.1 Select the “ENTER Key Lerning”
5.2 Press the button of SWC designated for [ENTER]
6. Learning EXIT Key:
6.1 Select the “EXIT Key Learning”
6.2 Press the button of SWC designated for [EXIT]
-
8/16/2019 User Manual HR-630 En -ASUKA Car TV
40/44
ASUKA HR-630 User Manual 40
. Learning TV LIST Key:
7.1 Select the “TV LIST Key Learning”
7.2 Press the button of SWC designated for [TV LIST]
-
8/16/2019 User Manual HR-630 En -ASUKA Car TV
41/44
ASUKA HR-630 User Manual 41
VIII.5 HDMI Setti ng
To choose AV output through HDMI and adjust output color
1. Highlight the option that you want to
adjust.
2. Select one by pressing the [OK] button or
exit the setting by pressing the[EXIT]/[MENU] button.
3. After adjusting, press the [EXIT]/[MENU]
button to exit the “HDMI Setting” menu.
VIII.6 Antenna Power Setting
To set up and adjust the image with preference.
1. Highlight the setting that you want toadjust.
2. Select one by pressing the [OK] button or
exit the setting by pressing the
[EXIT]/[MENU] button.
3. After adjusting, press the [EXIT]/[MENU]
button to exit the “ Antenna Power Setting”
menu.
VIII.7 Version / Upgrade
To upgrade the software version
1. Insert the USB device containing the
software upgrade file into the card slot.
2. After entering the Version/Upgrade menu,
press the [OK] button to start the
upgrade.
VIII.8 Reset Default
To reset all settings to factory default
1. Highlight “Reset Default” option and press
the [OK] button to reset system settings to
factory default.
2. Press the [EXIT] button or select [NO] toexit.
-
8/16/2019 User Manual HR-630 En -ASUKA Car TV
42/44
ASUKA HR-630 User Manual 42
IX. Troub le Shoo t ing Q&A
Most of the troubleshooting issues can easily be solved. The common cases and
their respective solutions are listed in the table below. If the problem is more complicated,
please contact the after sales service.
Problem Possible Issue Solution
No picture, no
audio.
The power cord is notproperly inserted into the
unit.
Check the power wire connection.
The unit is not switched on. Press the [POWER] button on the
remote control .Unit is in stand-by mode.
In TV mode, the
number of TVchannels is not as
much as we
expected.
The number of available
channels is limited due to
the local broadcasting
system. The available
channels can vary
depending on the area.
Perform the “Auto Search” to rescan
all the channels.
The signal quality of some
TV channels is too low.
Please use the active antennas
instead of passive antennas for better
reception quality.
Some TV channels are not
available.
Only the locally free broadcasted
channels can be viewed. They can
vary depending on the area.
In TV mode, all of
the channels
show “no signal or
random mosaic
tiles appear on the
display.”
Some TV channels signal
quality is too low.
Please use the active antennas
instead of the passive antennas for
better reception quality.The antennas are not
properly connected.
Please check the connection of the
antennas.
No DVB-T2 service is
provided in the area.
Check your country TV singnal
coverage map. It is not possible to
watch digital TV in non-covered
areas.
Incorrect regional setting
Please check whether “Regional
Setting” is correct or not, and please
perform “Auto Search” to rescan all ofthe channels.
The video is fine
but there is no
sound.
The audio volume is too
low.
Press the [VOL] button to raise the
volume.
The audio is muted.Press the [MUTE] button to disable
the mute function.
The remote
control does not
work
No power.
Check the remote control battery.
NOTE: the remote control is equipped
with a small plastic insulator that must
be removed in order to function thisunit. Please check whether the plastic
insulator has been removed or not.
-
8/16/2019 User Manual HR-630 En -ASUKA Car TV
43/44
ASUKA HR-630 User Manual 43
No “line-of-sight” between
unit and controller
Ensure there are no obstacle
between the controller and the unit.
-
8/16/2019 User Manual HR-630 En -ASUKA Car TV
44/44
X. Specif ic at ion
RF Input
Antenna Active antenna supported (F-Connector)
Frequency range VHF (170-230 MHz) and UHF band (470-862 MHz)
RF input impedance 75 Ohm
Channel bandwidth 6/7/8 MHz for DVB-T; 1.7/5/6/7/8/10 MHZ for DVB-T2TV System
Transmissionstandard
ETSI EN 302-755 v1.3.1 standardSupport all DVB-T2 modes, including, Single and multiple-PLPs SISO and MISO transmission
Video/Audio decoderReal time 1080P Full-HD Video Decoder:- MPEG-2(ISO/IEC 13818-2) SD& HD- H.264 (MPEG-4 AVC, ISO/IEC 14496-10) SD & HD
S/W Feature
OSD Language English, German, French, Portuguese, Spanish, Italian, Dutch,Finnish, Traditional Chinese, Thai, Indonesia
FeaturesDVB-T/T2 TV, Auto Channel Search, Multi –Language EPG,Steering Wheel Control (SWC)
TV/Radio Recording Record TV programs on the USB device
Media formats supported
Media port USB
Audio formatMP3, WAV, ASF(option), AAC(option), WMA(option),RM(option)
Video formatMPEG-I/II/IV, VOB, AVI, DivX, Xvid, MKV, TS, MOV,RMVB(option), FLV(option), WMV(option), ASF(option)
Subtitle format SRT, SUB, SSA, ASS, SMI, PSB, TXT, IDX
Recorded file format *.tsv (TV recording)
Interface
USB port1 Support the USB 2.0 host (for playback and for TV recording)1 for smart phone charging
AV input port 1 A/V Input with RCA connector
DVR input port 1 Mini-USB input
CCD input port 1 CVBS input with RCA connector
Power/IR/SWC port
DC Voltage input (Support +12V ~ 24V DC)
IR Signal input
Steering Wheel Control Signal input (Supportvoltage:0.2~15V)
AV Output 2 CVBS Video out, 1 Audio (L/R) out
HDMI Output 1 HDMI output (Type A)
UART/RGB output 1 UART, 1RGB output
Monitor port Dedicated port for advanced intergration with 2-DIN monitor
TV out 2 CVBS video out, 1 Audio (L/R) out, 1 HDMI out
Power
Input voltage 12-24 V DC
Power consumption 6.5 Watt, max