user manual sw121hla - axiom pro audio · user manual sw121hla horn loaded ... htac hand tool or...

8
USER MANUAL SW121HLA horn loaded a��e �oo�er a��e �oo�er �oo�er KEY FEATURES • Very High O�tp�t • High-�trength, �ater repellent �one • Compa�t �ize �or a �ery good o�tp�t-to�eight rao • 96KHz / 40 �it floang point CORE pro�e��ing �ith PRONET remote �ontrol • Horn-loaded �onfig�raon • �igitally �ontrolled Cla�� � amplifier mod�le �ith �P• �igitally �ontrolled Cla�� � amplifier mod�le �ith �PINTRODUCTION The �W121HA �oo�er i� de�igned to deli�er high q�ality lo�req�en�y reprod�on �here �ery high o�tp�t i� a key req�irement, together �ith �ell defined deep �a�� re�pon�e and �a�t tran�ient re�pon�e. It� �ompa�t �ize and light �eight make it �ita�le �or �e�eral different �e�, ranging �rom to�ring appli�aonto fixed in�tallaon� and high-le�el dan�e �l�. The �W121HLA i� a high-per�orman�e po�ered �oo�er �ith a �pe�ial �onfig�raon �a�ed on a �mall �a�ity �ehind the �peaker and a �ery �ompa�t horn. With thi� �pe�ial de�ign and a par�lar digital pro�e��ing, the �W121HLA �an �e �ed a� an in�ra-� and it �an pro�ide an impre��i�e lo�-�req�en�y exten�ion and a “p�n�hy” �eeling in the �pper �a�� range. The �W121HLA i� eq�ipped �ith a 21” (533mm) tran�d�er �apa�le o� long ex�r�ion (�p to 70mm peak- to-peak) and �ontrolled �y a �o�le �ili�on �pider. The ro�t �opper 135mm (5.3”) �oi�e �oil i�o�nded in �o�r different layer�oth o�t�ide and in�ide the �oil �pport, then impro�ing the long term thermal �apa�ity o� the lo�d�peaker. Cone� are made in �ell�lo�e �ith a �pe�ial �ar�on fi�er treatment to in�rea�e re�i�tan�e and d�ra�ility. TECHNICAL SPECIFICATION Acouscal Amplifier Type Cla�� �ith Varia�le �it�hing Freq�en�y, �P� and PFC �y�tem type Horn-Loaded ��oo�er Tran�d�er �ingle Neodymi�m 21” (530mm), 5.3” (135mm) VC, �ar�on fi�er rein�or�ed treated �ell�lo�e �one, �plit �inding �o�r layer� I�V �opper �oil, triple �ili�on �pider �pen�ion. O�tp�t Po�er 4000 W �ain� Voltage Range (Va�) 100-240 V~ 50/60 Hz �ain� Conne�tor Po�erCon TRUE1 - NAC3PX (In/O�t) Con��mpon* 600 W (nominal) 1800 W (max) IN / OUT Conne�torNe�trik XLR-� / XLR-F Freq�en�y re�pon�e (±3 dB) 31 Hz – 80 Hz (Pro�e��ed) IN / OUT Net�ork Conne�torETHERCON® (NE8FAV) �axim�m Peak �PL @ 1m 141 dB Mechanical Electrical Width 589 mm (23.18”) Inp�t Impedan�e 20 kΩ �alan�ed Height 801 mm (31.53”) Inp�t �en�i�ity +4 dB� / 1.25 V �epth 1022 mm (40.23”) �ignal Pro�e��ing CORE pro�e��ing, 96kHz / 40�it floang point �HARC �P, 24 �it A�/�A �on�erter�epth In�l�ding Wheel1122 mm (44.17”) Con�tr�on 15 mm, rein�or�ed Phenoli� Bir�h �ire�t a��e�� Control� 4 Pre�et�: �tandard, In�ra�, Cardioid, U�er. Net�ork Terminaon, GN� Link Paint High re�i�tan�e, �ater �a�ed paint Wheel� 4 hea�y-load 100 mm ø Remote Control� PRONET �ontrol �oſt�are Tran�port 5 handle� Net�ork proto�ol CANBU� Net Weight 82.2 Kg (180.8 l��.) 78.2 Kg (172.4 l��.) - �itho�t �heel* Nominal consumpon is measured with pink noise with a crest factor of 12 dB, this can be considered a standard music program. re�i�ion 2017-03-29

Upload: lybao

Post on 05-Sep-2018

217 views

Category:

Documents


0 download

TRANSCRIPT

USER MANUAL

SW121HLAhorn loaded a����e ����oo�era����e ����oo�er����oo�er

KEY FEATURES• Very High O�tp�t • High-�trength, �ater repellent �one• Compa�t �ize �or a �ery good o�tp�t-to�eight ra��o • 96KHz / 40 �it floa��ng point CORE pro�e��ing �ith PRONET remote �ontrol• Horn-loaded �onfig�ra��on • �igitally �ontrolled Cla�� � amplifier mod�le �ith ��P�• �igitally �ontrolled Cla�� � amplifier mod�le �ith ��P�

INTRODUCTION The �W121HA ����oo�er i� de�igned to deli�er high q�ality lo� �req�en�y reprod����on �here �ery high o�tp�t i� a key req�irement, together �ith �ell defined deep �a�� re�pon�e and �a�t tran�ient re�pon�e. It� �ompa�t �ize and light �eight make it ��ita�le �or �e�eral different ��e�, ranging �rom to�ring appli�a��on� to fixed in�talla��on� and high-le�el dan�e �l���. The �W121HLA i� a high-per�orman�e po�ered ����oo�er �ith a �pe�ial �onfig�ra��on �a�ed on a �mall �a�ity �ehind the �peaker and a �ery �ompa�t horn. With thi� �pe�ial de�ign and a par����lar digital pro�e��ing, the �W121HLA �an �e ��ed a� an in�ra-��� and it �an pro�ide an impre��i�e lo�-�req�en�y exten�ion and a “p�n�hy” �eeling in the �pper �a�� range. The �W121HLA i� eq�ipped �ith a 21” (533mm) tran�d��er �apa�le o� long ex��r�ion (�p to 70mm peak-to-peak) and �ontrolled �y a �o��le �ili�on �pider. The ro���t �opper 135mm (5.3”) �oi�e �oil i� �o�nded in �o�r different layer� �oth o�t�ide and in�ide the �oil ��pport, then impro�ing the long term thermal �apa�ity o� the lo�d�peaker. Cone� are made in �ell�lo�e �ith a �pe�ial �ar�on fi�er treatment to in�rea�e re�i�tan�e and d�ra�ility.

TECHNICAL SPECIFICATIONAcoustical

Amplifier Type Cla�� � �ith Varia�le ��it�hing Freq�en�y, ��P� and PFC�y�tem type Horn-Loaded ����oo�er

Tran�d��er

�ingle Neodymi�m 21” (530mm), 5.3” (135mm) VC, �ar�on fi�er rein�or�ed treated �ell�lo�e �one, �plit �inding �o�r layer� I�V �opper �oil, triple �ili�on �pider ���pen�ion.

O�tp�t Po�er 4000 W�ain� Voltage Range (Va�) 100-240 V~ 50/60 Hz�ain� Conne�tor Po�erCon TRUE1 - NAC3PX (In/O�t)Con��mp��on* 600 W (nominal) 1800 W (max)IN / OUT Conne�tor� Ne�trik XLR-� / XLR-F

Freq�en�y re�pon�e (±3 dB) 31 Hz – 80 Hz (Pro�e��ed) IN / OUT Net�ork Conne�tor� ETHERCON® (NE8FAV)�axim�m Peak �PL @ 1m 141 dB MechanicalElectrical Width 589 mm (23.18”)Inp�t Impedan�e 20 kΩ �alan�ed Height 801 mm (31.53”)Inp�t �en�i���ity +4 dB� / 1.25 V �epth 1022 mm (40.23”)

�ignal Pro�e��ing CORE pro�e��ing, 96kHz / 40�it floa��ngpoint �HARC ��P, 24 �it A�/�A �on�erter�

�epth In�l�ding Wheel� 1122 mm (44.17”)

Con�tr����on 15 mm, rein�or�ed Phenoli� Bir�h

�ire�t a��e�� Control� 4 Pre�et�: �tandard, In�ra���, Cardioid, U�er.Net�ork Termina��on, GN� Link

Paint High re�i�tan�e, �ater �a�ed paintWheel� 4 hea�y-load 100 mm ø

Remote Control� PRONET �ontrol �oft�are Tran�port 5 handle�

Net�ork proto�ol CANBU� Net Weight 82.2 Kg (180.8 l��.)78.2 Kg (172.4 l��.) - �itho�t �heel�

* Nominal consumption is measured with pink noise with a crest factor of 12 dB, this can be considered a standard music program.

re�i�ion 2017-03-29

MECHANICAL DRAWING

OPTIONAL ACCESSORIESNAC3FXW Ne�trik Po�er�on® TRUE1 (�or po�er in) Note:

See assembly instruction downloadable from NEUTRIK WEB site at: http://www.neutrik.com/NAC3MXW Ne�trik Po�er�on® TRUE1 (�or po�er o�t)

HTAC Hand tool �or ��ghtening the ���hing o� the po�erCON TRUE1CAT5SLU01/05/10 LAN5� - Cat5e - RJ45 pl�g� and NE8�C1 �onne�tor�. 1/5/10 m LengthAR100LUxx Hy�rid �a�le 1x Cat6e - 1x A�dio �ith NEUTRIK �onne�tor� 0.7/1.5/2.5/5/10/15/20 m LengthAR200LUxx Hy�rid �a�le 1x Cat6e - 2x A�dio �ith NEUTRIK �onne�tor� 20/30/40/60/80 m LengthAVCAT5PROxx Cat5e on �a�le dr�m, RJ45 pl�g� and NEUTRIK �onne�tor� 30/50/75 m LengthNE8MCB Ne�trik Ether�on PLUGNC3MXXBAG Ne�trik XLR-�NC3FXXBAG Ne�trik XLR-FUSB2CAN PRONET net�ork �on�erterUSB2CAND PRONET net�ork �on�erter �ith d�al RJ45 o�tp�t�see http://www.axiomproaudio.com/ for detailed description and other available accessories.

SPARE PARTSAC103GS 100 mm ��i�el �a�tor �itho�t �rake 91DA4000 �A4000 Amplifier mod�leAC115DN Bla�k �teel handle 91PCAGLED1 Po�i��on Che�k LE� PCBA

98EDG21SW8 21’’ �oo�er - 5.3” VC - 8 ohm 91PCAG00031 ��P Inter�a�e PCBANAC3PX Ne�trik Po�er�on® TRUE1 Applian�e in-o�t �om�ina��on 91DSPKT3 ��P PCBA and Control PCBA

SCNACPX Ne�trik R���er �ealing �or NAC3PX 91CRAX2010 XLR Inp�t PCBA99SWRT121SV Lo�d�peaker horn metal grid 95SW121PLS2 Inp�t/Control Panel (only me�h)

80.1

cm

31.5

"

58.9 cm23.2"

102.2 cm40.2"

112.2 cm44.2"

NOTE: This product is designed to work on floor and is not equipped with rigging flying points, do not suspend the loudspeakers from the handle.

POWER INPUTMAINS~ IN - Po�er�on® NAC3PX po�er inlet �onne�tor. To ��it�h the amplifier on, in�ert the Po�er�on® �onne�tor and t�rn it �lo�k�i�e into the ON po�i��on. To ��it�h the amplifier off, p�ll �a�k the ��it�h on the �onne�tor and t�rn it �o�nter-�lo�k�i�e into the POWER OFF po�i��on.MAINS~ OUT - Po�er�on® NAC3PX po�er o�tlet �onne�tor. Thi� i� �onne�ted in parallel �ith the �AIN�~ IN.

WARNING! Connect no more than one subwoofer unit to the MAINS~ OUT connector.WARNING! If you use the MAINS~ OUT turn on each subwoofer unit one a time. WARNING! In the case of product failure or fuse replacement, disconnect the unit completely from the mains power. WARNING! Use a suitable power cable and mains plug to build the power cable, it must only be connected to a socket corresponding to the specifications indicated on the amplifier unit.See assembly instruction downloadable from NEUTRIK WEB site at: http://www.neutrik.com/

CONTROL PANELON - Thi� LE� indi�ate� po�er on �tat��.PROT - Thi� red LE� light� �hen the amplifier mod�le i� in prote�t mode �or an internal �a�lt and, �on�eq�ently, the amplifier i� m�ted.SIGN LIMIT - Thi� LE� light� in green to indi�ate the pre�en�e o� the �ignal and light� in red �hen an internal limiter red��e� the inp�t le�el.INPUT - A�dio �ignal inp�t �ith lo�king XLR �onne�tor. It ha� a ��lly ele�troni�ally �alan�ed �ir��itry in�l�ding A� �on�er�ion �or the �e�t �/N ra��o and inp�t headroom.LINK - A dire�t �onne���on �rom the inp�t �onne�tor to link other �peaker� �ith �ame a�dio �ignal.GND LIFT - Thi� ��it�h lift the gro�nd o� the �alan�ed a�dio inp�t� �rom the earth-gro�nd o� the amplifier mod�le.

PRESET BUTTON - Thi� ��tton ha� t�o ��n���on:1) Pre��ing it �hile po�ering on the �nit:ID ASSIGN the internal ��P a��ign� a ne�

I� to the �nit �or the PRONET remote �ontrol operation. Ea�h lo�d�peaker m��t ha�e a �niq�e I� to �e �i�i�le in the PRONET net�ork. When yo� a��ign a ne� I�, all the other lo�d�peaker� �ith the I� already a��igned m��t �e ON and �onne�ted to the net�ork.

2) Pre��ing it �ith the �nit ON yo� �an �ele�t the ��P PRE�ET. The �ele�ted PRE�ET i� indi�ated �y the �orre�ponding LE�:

STANDARD Thi� PRE�ET i� ��ita�le �or any appli�ation �here lo� �req�en�y rein�or�ement i� req�ired. It �eat�re� a 90Hz ��t off �req�en�y and it �an �e ��ed in almo�t any en�ironment in �om�ina��on �ith any �er���al array or point �o�r�e �y�tem.

INFRA Thi� PRE�ET �an �e ��ed �hen a deeper �a�� re�pon�e i� req�ired (Note that �hen thi� pre�et i� ��ed the �o�nd pre���re le�el o� the �y�tem i� �lightly red��ed). NOTE: INFRA and �TAN�AR� PRE�ET m��t NOT �e ��ed together in �lo�e �nit�.

CARDIOID Thi� �pe�ial PRE�ET, �om�ined �ith the �TAN�AR� PRE�ET, gi�e� the ad�antage to red��e the lo� �req�en�ie� at the �a�k o� an array o� three ����, in order to o�tain a more �om�orta�le le�el �or the per�ormer� on the �tage �itho�t lo�ing le�el �or the the a�dien�e in �ront o� the array. The �ardioid �onfig�ra��on i� al�o ��e��l in �it�a��on �here yo� �ant to red��e the �a�� �req�en�y �eed�a�k d�e to many mi�rophone� on �tage, �or example �or a�o����� and jazz en�em�le, �la��i� or�he�tra, m��i�al�. F�rther in thi� man�al yo� �an find �ome example ho� to �et �p a �ardioid array.

USER Thi� LE� light� �hen the U�ER PRE�ET i� loaded. Thi� pre�et �orre�pond� to the fir�t U�ER �E�ORY (Pre�et 4-U) o� the ��P and, a� a �a�tory �etting, it’� the �ame to �TAN�AR�. I� yo� �ant to modi�y it, yo� ha�e to �onne�t the �nit to a PC, edit the parameter� �ith PRONET �oft�are and �a�e it into “Pre�et 4-U-yo�r�pre�et�name” (�ee al�o ��rther in thi� man�al)“Pre�et 4-U-yo�r�pre�et�name” (�ee al�o ��rther in thi� man�al) (�ee al�o ��rther in thi� man�al)(�ee al�o ��rther in thi� man�al).

NETWORK IN/OUT - The�e are a �tandard RJ45 CAT5 �onne�tor� (�ith op��onal NEUTRIK NE8�C RJ45 �a�le �onne�tor �arrier), ��ed �or PRONET net�ork tran�mi��ion o� remote �ontrol data o�er long di�tan�e or m�l��ple �nit appli�a��on�. TERMINATE - In a PRONET net�ork the la�t lo�d�peaker de�i�e m��t �e terminated (�ith an inner load re�i�tan�e) e�pe�ially in a long r�n �a�ling: pre�� thi� ��it�h i� yo� �ant to terminate the �nit.

POWER AMPLIFIERThe �A4000 mod�le employed �or po�ering the �W121HLA in�l�de� a �ni�er�al reg�lated ��it�h mode po�er ��pply �ith PFC (Po�er Fa�tor Corre���on) that deli�er� in an �ltra-�ompa�t pa�kage a maxim�m po�er o� 4000W in any �ondi��on o� main� ��pply �arian�e. The inno�a���e te�hnology ��ed �or thi� amplifier (in�l�ding al�o the ��e o� a �aria�le ��it�hing �req�en�y) offer� per�orman�e� at the top o� the range, ���h a� a ��perior �o�nd defini��on at any a�dio �req�en�y, �ery high dynami�� al�o �or lo� le�el �ignal� and �ery lo� di�tor��on e�en at the maxim�m po�er. The ��perior �o�nd q�ality �an �e �ompared �ith top-o�-the-range AB-�la�� analog �y�tem�, �hile the �A mod�le� �eat�re a higher dynami��, �ery �ompa�t �ize and light �eight and effi�ien�y a�o�e 90%.

SIGNAL PROCESSINGThe �y�tem pro�e��ing i� �a�ed on the CORE ��P platform, �hi�h ha� �een de�igned �y the PROEL R&� La�oratorie� ��ing one o� the mo�t ad�an�ed �HARC ��P �or a�dio appli�a��on. It �eat�re� 40�it, 96kHz floa��ng point re�ol���on and high q�ality 24�it A�/�A �on�erter�, �or a per�e�t �ignal integrity, a dynami� range in ex�e�� o� 110dB and a ��perior �oni� per�orman�e. Thank� to it� ma��i�e pro�e��ing po�er, the CORE platform i� �apa�le o� pro�iding the mo�t �ophi����ated algorithm� �or �peaker pro�e��ing, together �ith remote �ontrol and net�orking �apa�ility.The PRONET �ontrol �oft�are, �orking on a �olid and relia�le CANBU� �a�ed net�ork proto�ol, pro�ide� an int�i���e inter�a�e �or the remote �ontrol o� the �hole �y�tem, �ith the po��i�ility o� eqing, delaying, in�rea�ing the prote���on� and monitoring the �tat�� o� the amplifier.

PRONETPRONET �oft�are ha� �een de�eloped in �olla�ora��on �ith �o�nd engineer� and �o�nd de�igner�, in order to offer an “ea�y-to-��e” tool to �et�p and manage yo�r a�dio �y�tem. With PRONET yo� �an �i��alize �ignal le�el�, monitor internal �tat�� and edit all the parameter� o� ea�h �onne�ted de�i�e.

Download the PRONET app from the AXIOM website at http://www.axiomproaudio.com/ clicking on downloads section of the product.

The �W121HLA lo�d�peaker de�i�e� �an �e �onne�ted ��ing the net�ork �onne���on, in thi� �a�e the PROEL U�B2CAN �on�erter op��onal a��e��ory i� needed. The fir�t ��me yo� �onne�t a de�i�e �ith the U�B2CAN �on�erter, Windo�� O.�. �ill a�k yo� to in�tall the dri�er file�, �hi�h yo� �an find in the �ri�er �older �ithin the Pronet appli�a��on �older (�y de�a�lt i� C:\Program File�\Proel\Pronet\�ri�er, or i� yo� �hanged it <yo�r path>\�ri�er). Plea�e re�er al�o to “In�talla��on” and “�ri�er�” paragraph� in the Pronet do��menta��on.The PRONET NETWORK i� �a�ed on a ro���t, relia�le and �a�t �omm�ni�a��on proto�ol �alled CANBU�. The de�i�e� in a PRONET NETWORK are �onne�ted together �ith a “linear ��� topology”. The U�B2CAN �on�erter m��t �e �onne�ted to the net�ork inp�t o� the fir�t de�i�e, the net�ork o�tp�t o� the fir�t de�i�e i� �onne�ted to the inp�t o� the �e�ond and �o on. For the net�ork �onne���on� �imple RJ45 �at.5 or �at.6 ethernet �a�le� �an �e ��ed (plea�e don’t �on���e a ethernet net�ork �ith a PRONET net�ork the�e are �ompletely different and m��t �e ��lly �eparated al�o �oth ��e the �ame kind o� �a�le).The �eginning and the end o� a PRONET NETWORK m��t �e terminated. One �ide i� terminated �y the U�B2CAN �on�erter, the other �ide m��t �e terminated pre��ing the TER�INATE ��it�h on the la�t de�i�e. All de�i�e� �et�een the�e t�o point� m��t ha�e the TER�INATE ��it�h lifted.

Assign the ID numberTo �ork properly in a PRONET net�ork ea�h �onne�ted de�i�e m��t ha�e a �niq�e iden��fier n�m�er, �alled I�. By de�a�lt the U�B2CAN PC �ontroller ha� I�=0 and there �an �e only one PC �ontroller. E�ery other de�i�e �onne�ted m��t ha�e it� o�n �niq�e I� eq�al or greater than 1: in the net�ork �annot exi�t t�o de�i�e� �ith the �ame I�.An I� n�m�er i� a��igned a�toma���ally to ea�h de�i�e� �hen they are t�rned on �or the fir�t ��me �onne�ted to a net�ork.In order to �orre�tly a��ign a ne� a�aila�le I� to ea�h de�i�e �or �orking properly in a Pronet net�ork, �ollo� the�e in�tr����on�:

1. ��it�h off all the de�i�e�.2. Conne�t them �orre�tly to the net�ork �a�le�.3. “TER�INATE” the late�t de�i�e in the net�ork �onne���on.4. ��it�h on the fir�t de�i�e keep pre��ed “PRE�ET” ��tton on the �ontrol panel.5. Lea�ing the pre�io�� de�i�e ��it�hed on, repeat the pre�io�� opera��on on the next de�i�e, �n��l the late�t de�i�e i� t�rned on.

The “A��ign I�” pro�ed�re �or a de�i�e make� the internal net�ork �ontroller to per�orm t�o opera��on�: re�et the ��rrent I�; �ear�h the fir�t �ree I� in the net�ork, �tar��ng �rom I�=1. I� no other de�i�e� are �onne�ted (and po�ered on), the �ontroller a���me I�=1, that i� the fir�t �ree I�, other�i�e it �ear�he� the next one left �ree.The�e opera��on� en��re that e�ery de�i�e ha� it’� o�n �niq�e I�, i� yo� need to add a ne� de�i�e to the net�ork yo� �imply repeat the opera��on o� �tep 4. E�ery de�i�e maintain� it� I� al�o �hen it i� t�rned-off, �e�a��e the iden��fier i� �tored in the internal memory and it i� �leared only �y another “A��ign I�” �tep, a� explained a�o�e.Thi� mean� that i� yo�r net�ork i� made al�ay� o� the �ame de�i�e� the a��igning I� pro�ed�re m��t �e exe��ted only the fir�t ��me the �y�tem i� t�rned on.For more detailed instruction about PRONET see the PRONET USER’S MANUAL included with the software.

+15

+10

+5

0

-5

-10

-15

-20

-25

-30

-3520 50 100 200 500 1K 2K 5K 10K 20K Hz

SW121HLA - PRESET RESPONSEINFRA

STANDARD

Useful tools to set up properly a vertical array system using the SW121HLA subwooferThi� i� a li�t o� tool� that �an �e �ery ��e��l to �et properly a �er���al array �y�tem �ith the �W121HLA a����e ����oo�er�.

CABLE TESTERIt i� a good pra����e to �he�k all �a�le� �e�ore ea�h in�talla��on, �e�a��e e�en one �a�lty �a�le �an �ompromi�e hea�ily the �y�tem per�orman�e.

INCLINOMETER WITH LEVERThi� tool �an �e ��ed to �eri�y the �er���al array angle. It �an �e ��ed at the top or at the �ottom o� the array In thi� �a�e yo� ha�e to ��m all �play angle�, �o the maxim�m pre�i�ion i� needed �or aiming the �er���al array, par����larly �or long thro� appli�a��on�.

LASER DISTANCE METERThi� in�tr�ment �an �e ��e��l to mea��re the height o� the �er���al array and to kno� the di�tan�e �et�een FOH-���� and FOH-Array �or �etting the delay ��me.

SMAART or similar acoustic measurement systemThe�e are ��e��l to mea��re delay�, pha�e and re�pon�e o� the �y�tem.

do notpressed

pressedlast device

network

network

AX2010A

USB2CAN

PC NOTEBOOK

USB 2.0 port

STATUS

CON

VERTERU

SB2CAN

CODE:

S/N:

RATING

S:

RoHS COM

PLIANT

MADE IN

ITALY USB2CAN

000015V --- 200m

A

EXAMPLE OF PRONET NETWORK WITH AX2010A AND SW121HLA

CARDIOID PRESETThe �ardioid pre�et m��t �e ��ed in a ��� array o� three �W121HLA. T�o �ox m��t �e oriented to�ard� the a�dien�e and one m��t �e t�rned in the oppo�ite dire���on (typi�ally the �ox in the �entre o� the array). The �ottom and the top �oxe� m��t ha�e the �TAN�AR� PRE�ET, the �ox in the middle m��t ha�e the CAR�IOI� PRE�ET. The a�dio �ignal �ent to all �oxe� i� the �ame.The CAR�IOI� PRE�ET ha� the �ame re�pon�e o� the �TAN�AR� PRE�ET, ��t to o�tain the maxim�m �an�ella��on on the �a�k �ide o� the array it ha� the pha�e in�erted and a proper le�el and delay �etting.The fig�re �elo� �ho�� t�o typi�al di�pla�ement o� the array. The fir�t �ith all the �oxe� in horizontal po�i��on �or a total height o� 1770 mm and a �idth o� 801 mm. The �e�ond one �ith all the �oxe� in �er���al po�i��on �or a total height o� 801 mm and a �idth o� 1770 mm.

NOTES:When placing the cardioid array keep a distance to walls or other obstacles of at least 80 cm (2.7 ft) in order not to affect the radiation of the reversed cabinet.When placing multiple cardioid arrays keep a distance between them of at least 120 cm (3.9 ft) in order not to maximize the combined radiation of whole arrays.

80 cm min.2.7 ft min.

120 cm min.3.9 ft min.

80 cm min.2.7 ft min.

stage

wall or otherbig ostacle

bass sum direction

bass cancellation direction

audience floor

NOTES:When placing the cardioid array keep a distance to walls or other obstacles of at least 80 cm (2.6 ft) in order not to affect the radiation of the reversed cabinet.When placing multiple cardioid arrays keep a distance between them of at least 80 cm (2.6 ft) in order not to maximize the combined radiation of whole arrays.

stage

wall or otherbig ostacle

bass sum direction

bass cancellation direction

audience floor

80 cm min.2.7 ft min. 80 cm min.

2.7 ft min.

80 cm min.2.7 ft min.

LIMITED WARRANTYProel �arrant� all material�, �orkman�hip and proper opera��on o� thi� prod��t �or a period o� t�o year� �rom the original date o� p�r�ha�e. I� any de�e�t� are �o�nd in the material� or �orkman�hip or i� the prod��t �ail� to ��n���on properly d�ring the appli�a�le �arranty period, the o�ner �ho�ld in�orm a�o�t the�e de�e�t� the dealer or the di�tri��tor, pro�iding re�eipt or in�oi�e o� date o� p�r�ha�e and de�e�t detailed de��rip��on. Thi� �arranty doe� not extend to damage re��l��ng �rom improper in�talla��on, mi���e, negle�t or a���e. Proel �.p.A. �ill �eri�y damage on ret�rned �nit�, and �hen the �nit ha� �een properly ��ed and �arranty i� ���ll �alid, then the �nit �ill �e repla�ed or repaired. Proel �.p.A. i� not re�pon�i�le �or any “dire�t damage” or “indire�t damage” �a��ed �y prod��t de�e����ene��.• Thi� �nit pa�kage ha� �een ���mitted to I�TA 1A integrity te�t�. We ��gge�t yo� �ontrol the �nit �ondi��on� immediately after �npa�king it.• I� any damage i� �o�nd, immediately ad�i�e the dealer. Keep all �nit pa�kaging part� to allo� in�pe���on.• Proel i� not re�pon�i�le �or any damage that o���r� d�ring �hipment.• Prod��t� are �old “deli�ered ex �areho��e” and �hipment i� at �harge and ri�k o� the ��yer.• Po��i�le damage� to �nit �ho�ld �e immediately no��fied to �or�arder. Ea�h �omplaint �or pa�kage tampered �ith �ho�ld �e done �ithin eight day� �rom prod��t re�eipt.

SAFETY INSTRUCTIONS– To red��e the ri�k, �lo�e ��per�i�ion i� ne�e��ary �hen the prod��t i� ��ed near �hildren.– Prote�t the apparat�� �rom atmo�pheri� agent� and keep it a�ay �rom �ater, rain and high h�midity pla�e�.– Thi� prod��t �ho�ld �e �ite a�ay �rom heat �o�r�e� ���h a� radiator�, lamp� and any other de�i�e that generate heat.– Thi� prod��t �ho�ld �e lo�ated �o that it� lo�a��on or po�i��on doe� not inter�ere �ith it� proper �en��la��on and hea��ng di��ipa��on.– Care �ho�ld �e taken �o that o�je�t� and liq�id� do not go in�ide the prod��t.– The prod��t �ho�ld �e �onne�ted to a po�er ��pply main� line only o� the type de��ri�ed on the opera��ng in�tr����on� or a� marked on the prod��t. Conne�t the apparat�� to a po�er ��pply ��ing only po�er �ord in�l�ded making al�ay� ��re it i� in good �ondi��on�.– WARNING: The main� pl�g i� ��ed a� di��onne�t de�i�e, the di��onne�t de�i�e �hall remain readily opera�le.– �o not �an�el the �a�ety �eat�re a���red �y mean� o� a polarized line pl�g (one �lade �ider than the other) or �ith a earth �onne���on.– �ake ��re that po�er ��pply main� line ha� a proper earth �onne���on.– Po�er ��pply �ord �ho�ld �e �npl�gged �rom the o�tlet d�ring �trong th�nder�torm or �hen left �n��ed �or a long period o� ��me.

CE CONFORMITYProel prod��t� �omply �ith dire����e 2004/108/EC (E�C), a� �tated in EN 55103-1 and EN 55103-2 �tandard� and �ith dire����e 2006/95/CE (LV�), a� �tated in EN 60065 �tandard.

PROEL S.p.A. (World Headquarter) - Via alla Ruenia 37/43 - 64027 Sant’Omero (Te) - ITALY Tel: +39 0861 81241 Fax: +39 0861 887862 www.axiomproaudio.comwww.axiomproaudio.com