User’s Guide for Model ISWFV387 v1901-01

WARNINGS & PRECAUTIONS

SAFETY WARNINGS• WARNING: To prevent fire or shock hazards, do

not expose this unit to rain or moisture.• Clean only with a dry cloth. Do not clean with liquid

cleaners or damp cloth.• Do not use with devices that should not be used

unsupervised.• CAUTION: TO REDUCE THE RISK OF ELECTRIC

SHOCK, USE ONLY INDOORS. • Do not use in a bathroom or other location where it

may come into contact with water or splashing.• WARNING: Where the mains plug or appliance

coupler is used as the disconnect device, such disconnect device shall remain readily operable.

• Risk of electric shock. Grounding continuity must be maintained.

• To prevent injury, this apparatus must be securely attached to the wall in accordance with the installation instructions.

• The Wi-Fi plug may not work properly if there is radio frequency interference. You may be required to reset the Wi-Fi plug should this occur.

• This product meets and complies with all Federal regulations.

FCC WARNINGSWARNING: To assure continued operation, follow the attached installation instructions and use only shield cables when connecting to other devices. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.• Increase the separation between the equipment

and receiver.• Connect the equipment into an outlet on a

circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer. For more information go to: www.P65Warnings.ca.gov

3

TABLE OF CONTENTS

Introduction - 4FeaturesIncludes

Power & ChargingCharging The Speaker - 5

OverviewSpeaker Controls & Inputs - 6Controls - 7LED Indicator Lights - 7

iLive Wi-Fi Control AppApp Download - 8Initial Wi-Fi Setup - 8Initial Wi-Fi Setup - Visual Guide - 9Amazon Alexa Setup - Visual Guide - 10Alternative Wi-Fi Setup - 11Alternate Setup - Visual Guide - 12Main Screen/Now Playing - 13Music Menu - 14Device List - 15

iLive Wi-Fi AppAdding Speakers/Devices - 16Multi-Room Play - 16Multi-Channel Play With Multiple Speakers - 16Internet Music Services - 17

Other Ways to Play - 18Bluetooth WirelessAux In

Troubleshooting - 19

Customer Support - 20Contact InformationInternational SupportWarranty Information

4

INTRODUCTION

Specifications are subject to change without prior notice.

Make your home audio ready with our Wi-Fi speakers and easy to use iLive Wi-Fi app. Connect to Spotify and other online music services with the touch of a button and play your favorite songs in any room of the house. Link Amazon Alexa with the speaker and ask Alexa to play music, read the news, check weather, control your smart home and more.

Features » Amazon Alexa cloud-based voice service

» Voice-activated

» Multi-room and multi-user capable

» Free iLive Wi-Fi app download

» On-speaker play, volume, and preset controls

» Built-in Wi-Fi & Wi-Fi Direct

» Supports Bluetooth Wireless - range 33 ft.

» Aux In (3.5mm audio input)

» Built-in rechargeable battery - approximately 5 hours at 50% volume

» Micro-USB port for battery recharge

Includes » 3.5mm audio cable

» Micro-USB to USB power cable

» User’s Guide

5

Charging The SpeakerThe speaker should be fully charged before use. A fully charged battery should last for approximately 5 hours of continuous use at 50% volume. Play time will decrease at louder volumes and increase at lower volumes.

POWER & CHARGING

It is not recommended to leave the speaker unattended while charging.

6

Speaker Controls & Inputs

OVERVIEW

21

5

6

43

1. Charging LED

2. Mode/Connection LED

3. Microphones

4. LED ring

5. Micro-USB power port

6. Aux In (3.5mm Audio Input)

7

Controls

LED Indicator Lights » Amazon Alexa (light ring)

Solid White - Amazon Alexa standing by Solid Blue - Amazon Alexa responding Solid Red - Amazon Alexa and microphones muted

» Wi-Fi (lower light) Blinking White - Connecting to Wi-Fi Solid White - Connected to Wi-Fi

» Bluetooth Wireless (lower light) Blinking Blue - Pairing Bluetooth Solid Blue - Paired

» Auxiliary Audio Input (lower light) Solid Green - Aux In detected and in use

» Battery (upper light) Solid Red - Charging Off - Fully charged

» Power/Mode Press and hold to power the speaker ON or OFF. Press to switch between Wi-Fi, Bluetooth, and Aux modes.

» Connect Wi-Fi/ Pair Bluetooth/Play/Pause In Wi-Fi Mode (white LED), press and hold to begin searching for Wi-Fi networks. In Bluetooth Mode (blue LED), press and hold to begin pairing to a Bluetooth device. Short press to pause or play audio.

» Alexa ON Press to activate Amazon Alexa and say a command. You can also just say, “Alexa...”, within range of the speaker’s microphones.

» Alexa Mute Press to mute the microphones and disable Amazon Alexa.

» Volume Press to adjust volume.

8

Free App DownloadThe iLive Wi-Fi Control app lets you play music and audio from streaming services like Spotify, iHeartRadio and others. It also controls the speaker’s other functions, such as multi-room play, multi-channel play, etc. Download the app to your device by scanning the QR codes below or search for the iLive Wi-Fi Control app in the Apple App Store™ or Google Play Store™.

Note that this app is designed for mobile devices only, such as smartphones or Wi-Fi enabled tablets. It is not available for use on regular desktop or laptop computers.

Initial Wi-Fi SetupTo use the speaker’s Wi-Fi features, the speaker and your phone or tablet must be connected to a Wi-Fi network. The app will guide you through the process, just follow the on-screen instructions and have your network password ready. The steps listed below and following visual guides are provided for your reference.

If you have a dual band wireless router, be sure to connect using the 2.4GHz band.

» Press and hold the Power button to power on the speaker. The speaker should start in Wi-Fi mode, indicated by a flashing white LED. If it is not in Wi-Fi mode, press the Mode button until Wi-Fi is selected. The LED may flash multiple colors after first powering on. This is normal, please wait for the LED to switch to flashing white, indicating the speaker is standing by in Wi-Fi Mode.

» Press and hold the Pair (WPS) button on the speaker.

» On your phone, launch the iLive Wi-Fi app and press “Add Device”. Follow the on-screen prompts to connect the speaker to your Wi-Fi network.

» When the speaker and your phone are successfully connected, a voice prompt will announce the connection and the white LED will turn solid.

» With the Wi-Fi connection complete, the app will automatically begin the process to connect to Amazon Alexa. Follow the on-screen prompts to link Alexa with the speaker and begin using Amazon Alexa Voice Services. You will need to enter your Amazon account information to use Alexa. The Amazon Alexa app can enhance the abilities of Alexa with your speaker, such as the ability to control various smart home products. The Amazon Alexa app can be found in the Google Play Store™ and Apple App Store™.

Apple™ Android™

ILIVE WI-FI CONTROL APP

9

Initial Wi-Fi Setup - Visual Guide

The app will automatically start searching for devices. Press

“Add Device” to begin.

A connection is successful when progress reaches 100%.

Follow the prompts and enter your Wi-Fi network password when ready.

Press “Finished” to complete setup. The app will automatically proceed to Amazon Alexa setup.

10

The app will automatically start searching for devices. Press “Add Device” and follow the prompts.

Wait for setup to finish.

Enter your Amazon account name and password. You must have an Amazon

account to access Alexa services.

Press “Next” to complete setup and begin using your

speaker with Amazon Alexa.

Amazon Alexa Setup - Visual Guide

ILIVE WI-FI APP

11

Alternative Wi-Fi SetupIf the app fails to connect to the speaker or your Wi-Fi network (time/percentage runs out), the app will automatically detect the malfunction and guide you through the Alternative setup. The app will direct you to your phone’s Wi-Fi Settings Menu to first connect to the speaker, then return to the app to finish connecting the speaker to your Wi-Fi network.

If you are still experiencing issues, consult the Troubleshooting section at the back of this manual (pg. 19).

12

Alternate Setup - Visual Guide

At the start of the Alternative setup, this screen will appear. Exit the app

and go to your phone’s Wi-Fi Settings.

You will need to reconnect to your network, select your Wi-Fi network and enter your password when prompted.

Select the speaker and connect to it. After connecting, exit and

return to the iLive Wi-Fi app.

When Wi-Fi network connection is complete, the app will display the speaker in the device list. You may

now begin using your speaker.

ILIVE WI-FI APP

13

Swipe left for Device Menu

Swipe right for Music Menu

Main Screen/Now Playing

1

3

5

2

4

6

7

1. Music Menu

2. Current Speaker/Device Menu

3. Add to Favorites

4. Current Playlist

5. Repeat/Shuffle

6. Volume

7. Play Controls

14

Music Menu

1

3

6

2

5

1. SEARCHSearch for songs, albums and artists.

2. FAVORITESOpen songs, artists, albums, or stations that you have saved.

3. MY MUSICOpen music that is stored on your phone or tablet.

4. INTERNET MUSIC SERVICESList of available third-party music apps.

5. ADD MORE SERVICESPress to add more third-party apps.

6. AUDIO PLAY MODEPress to enable Bluetooth or the 3.5mm Audio Input.

4

ILIVE WI-FI APP

15

Device List

1

3

2

1. ADD DEVICE/REFRESH LISTAdd more speakers for more play options. Refresh the list of connected devices.

2. SPEAKER SETTINGSRename a speaker, set preset stations, and find additional information on a speaker.

3. AUDIO CHANNEL SELECTORSet audio channels for the speaker L / R / LR (left/right/stereo).

16

Adding Speakers/DevicesThe procedure for adding more speakers is almost the same as the initial Wi-Fi setup for the first speaker. From the Device screen, press the button and follow the on-screen prompts to connect a new iLive Wi-Fi speaker to your Wi-Fi network. When successfully completed, the new speaker should appear in the Device List, and be ready to use.

Multi-Room PlayPlace speakers in any room and use the app to play music from the speaker of your choice. You can play different songs from different speakers, set individual volume levels, or you can link all of the speakers to play the same song.

Multi-Mode » In the Device List, press and hold a device icon for two seconds, then drag

towards another device to link the speakers together.

Solo-Mode » Press and hold the device icon, then drag downwards past the dotted line.

Multi-Channel Play With Multiple SpeakersYou can use two or more speakers in one room for a surround sound effect by setting the Audio Channel selector to “LR” (stereo) for all of the speakers.

You can also use two speakers at once for stereo play by setting the Audio Channel selector to “L” and “R” for the “left” and “right” speaker respectively.

See #3 on the previous page.

ILIVE WI-FI APP

17

Internet Music Services

TheiLive Wi-Fi app supports and can play songs from Spotify, iHeartRadio, and Tidal. When you open any of these third-party services, you will be prompted to log in and link your account with the iLive Wi-Fi app so that it can access any songs or stations you may already have saved with that service.

If you do not have an account with one of these services, theiLive Wi-Fi app can guide you through the set up process; however, you may need to download and install one of the internet music services first (ex. Spotify app), before it can play. Follow the on-screen prompts to add services and set up an account.

18

OTHER WAYS TO PLAY

Bluetooth WirelessThe speaker can also connect to devices via Bluetooth. Follow the steps below to pair to a Bluetooth enabled device.

» Power on the speaker and press the Mode button to select Bluetooth Mode.

» Press and hold the Pair button to begin pairing. The LED indicator will begin blinking blue as it searches for a device.

» Be sure your phone’s Bluetooth is enabled. Your phone should automatically detect the speaker, open your Bluetooth settings, and select ISWFV387.

» When connected, the indicator on the speaker will turn solid blue, and a voice prompt will sound from the speaker. The speaker is now connected. Use the controls on your phone to select and begin playing audio.

Note : Please wait for the LED to switch to flashing white, indicating the speaker is standing by in Wi-Fi mode then press the mode button to change to another mode.

Aux InRequires a 3.5mm audio cable (included).

» Power on the speaker and press the Mode button to select Aux In Mode, indicated by a solid green LED light. .

» Connect a 3.5mm audio cable to the Aux In on the unit and the audio output/headphone jack on an audio device.

» Audio played through the connected device will now be heard through the speakers. Use the controls on the connected device to play, pause, or skip selected tracks.

19

TROUBLESHOOTING

PROBLEM POSSIBLE SOLUTIONCannot complete Wi-Fi network set up

» Make sure the speaker has power and is charged.

» Make sure you are connecting to the correct Wi-Fi network.

» If using a dual band wireless router, be sure to use the 2.4GHz band.

» Be sure to enable Wi-Fi on your mobile device.

» Test your internet connection by loading/reloading a web page. If you cannot load the page, you may need to restart your router.

» Use the alternate connection method (pg. 11).

» Uninstall then reinstall the app, power the speaker OFF, then ON, and restart setup.

Intermittent audio/audio doesn’t play

» Make sure the volume on the speaker or your connected device is not too low.

» Interference may be interrupting the Wi-Fi signal (possible sources could be microwaves, cell phone signals, etc.). Move the system to another location to test.

» Stop other applications that may be streaming media from the internet.

» The speaker may have a weak Wi-Fi connection. Move the speaker closer to your router.

Bluetooth fails to connect » Make sure the speaker has power and is charged.

» Make sure both the speaker and your device are in Bluetooth mode.

» Stay within 33 ft. of the speaker when pairing.

Aux In won’t play » Make sure the audio cable is firmly connected to the audio ports of both devices.

» Make sure the volume on the speaker or your connected device is not too low.

» Press the Mode button to manually switch to Aux In mode.

White noise » Power the speaker OFF, then ON again.

Speaker still will not function properly

» Hold down the Alexa Mute button for 10 seconds to restore factory settings.

20

CUSTOMER SUPPORT

Protect for Today Sustain for Tomorrow

Made Green

Contact InformationWebsite: www.iLiveElectronics.com Email Support: prodinfo@dpiinc.com Email Parts: partsinfo@dpiinc.com Phone Support: 1-888-999-4215

Warranty InformationFor Warranty Information and the most up-to-date version of this User’s Guide, go to www.iLiveElectronics.com.

International SupportTo download this User’s Guide in English, Spanish, or French, or to get answers to frequently asked questions, visit the support section at: www.iLiveElectronics.com

Para descargar este Manual del Usuario en inglés, español y francés, o para obtener respuestas a preguntas frecuentes, visite la sección de apoyo en: www.iLiveElectronics.com

Pour télécharger ce guide de l’utilisateur en anglais, espagnol ou français, ou pour obtenir des réponses à des questions fréquemment posées, consultez la rubrique: www.iLiveElectronics.com

Copyright © 2017 Digital Products International (DPI, Inc.)Amazon, Alexa and all related logos are trademarks of Amazon.com, Inc. or its affiliates. The Spotify software is subject to third party licenses found here: www.spotify.com/connect/third-party-licensesAll other trademarks appearing herein are the property of their respective owners.