v105 cable 1/2 dia. x 1/16 x 19' 8storage.cloversites.com/creativestairparts/documents/2016...
TRANSCRIPT
AISI 304 AISI 316 Dimensions
5 6000 CABLE 4851 CABLE 1/2" dia. x 19' 8"
$165.58 $374.98
AISI 304 AISI 316 Dimensions
1 6000 CABLE 4801 CABLE 1-2/3" dia. x 5/64" x 19' 8"
$238.48 $439.33
V105 CABLE 1/2" dia. x 1/16" x 19' 8"
$92.03
Ø = diameter
AISI 316 For tube A B C
456 CABLE 1-2/3" dia. x 5/64" 3-5/16" 1"
$25.67
AISI 303 Dimensions
0129 CABLE 1" dia. Ball 1/2 " dia. hole
$15.09
B
AISI 303 AISI 316 For tube—A Hole—B
0069 CABLE 4042 CABLE 1-2/3" dia. 1/2" dia. through
$9.20 $11.98
6 9100 CABLE 4 0493 CABLE 1-2/3" dia. 1/2" dia. blind right
$10.58 $19.44
0 6922 CABLE 4 0492 CABLE 1-2/3" dia. 1/2" dia. blind left
$10.58 $19.44
Tubes
AISI 304 AISI 316 Dimensions A Hole F Height H
020 CABLE 4072 CABLE 4-9/64" dia. 1-11/16" dia. 19/32"
$16.02 $19.31
AISI 316 For tube A B C
4483 CABLE 1-2/3" dia. x 5/64" 3-17/64" 2-23/64"
$63.07
Round Bar
Sphere Cap
Round Bar Support
Anchorage
Anchorage
Anchorage
Interior Only Exterior Rated
ØB
ØA
C
120º
120º
ØA
ØB
C
ØA
ØF
H
1-3/16"
25/32"
ØB
Ø7/
8"
ØA
Indital USA offers a broad selection of complimentary parts for bar, glass, and cable systems from its stainless railing line, Arteferro INOX. Choose from an increased assortment of newels, handrail supports, finials, glass clips, accessories and unique designs such as the internationally acclaimed "cubed" line.
The modular system allows flexibility for part considerations and ease of installation vs. comparable welded systems. An architectural focal point begins with best-in-class selection for aesthetic, clean lines setting up a purely contemporary project.
Indital USA is also proud to offer a stocking program for systems that meet light commercial applications. For test certification data, please speak with your Indital USA sales representative.
A new pre-galvanized system (similar to INOX stainless) was developed and launched in 2008 for projects that require the same look as INOX, but are a simple, cost effective alternative. STEELNOX offers the flexibility to paint in the field using truly artistic colors from reds, blacks, white, or various hues including stainless coatings!
Early adopters are enjoying an off-the-shelf parts system only sourced through Indital USA. All that is needed (after tapping and drilling holes) is the ability to re-galvanize the areas using easy to source spray to eliminate the potential for corrosion prior to priming and painting. This is a great alternative for decking or cable projects on top of standard contemporary applications (often seen in modern lofts for stair railings). Many of the same principles apply to choosing parts for the system, handling, and the tools necessary to complete the job as for INOX.
For installation instructions, please review the series of videos under the VIDEO tab on our Creative site at
www.creativestairparts.com
Stainless Steel
2 3
Tubes | Anchors
Interior Only Exterior Rated Interior Only Exterior Rated
1/8"
AISI 316 For tube
4100 CABLE 1-2/3" dia. x 5/64"
$17.60
AISI 303 For tube
0119 CABLE 1-2/3" dia. x 5/64"
$12.20
AISI 304 AISI 316 Thread
0385 CABLE 0 3853 16 CABLE M5 x 1"
$.38 $.64
Hexagon socket countersunk flat head screw UNI 5933 / DIN 7991
AISI 316 For Tube A B
450 CABLE 1-2/3" dia. x 5/64" 2-9/16"
$47.22
AISI 316 For Tube A B C
446 CABLE 1-2/3" dia. x 5/64" 55/64" 2-5/64"
$83.91
Pivotable Connector, satin finish
90° angle Connector, satin finish
AISI 316 For Tube A B
451 CABLE 1-2/3" dia x 5/64" 2-9/16"
$55.82
AISI 316 For Tube
455 CABLE 1 2/3" dia. x 5/64"
$20.02
AISI 304 Thread
0382 CABLE 13/64" x 25/32"
$.22
Cross recessed countersunk flat head screw (for wood) DIN 7505A
Connector, satin finish
Connector, satin finish
Cap Cap
ØA
B
C
B
ØA
3/16
"
90º
90º
ØA
B
B
4 5
ØA
B
B
Hand Rail Support Tube Connectors | Caps
Glue Required Glue Required
Ø1/2"Ø1/4"
Ø2-
3/4"
1/4"
7/16"7/16"
2-7/8"
2-1/2"1-21/32"
1-13/16"
3-11
/32"
ØA
Ø1/2"
13/32"
H
1-1/16" 2-17/32"
13/32"
H
ØA
Ø 1/2"
AISI 303 AISI 316 For tube A H
031 S1 CABLE S 1316 31 CABLE 1-2/3" dia x 5/64" 2-61/64"
$30.18 $49.36
Ø = diameter
AISI 303 AISI 316 For tube A H
S 030 CABLE S 0303 16 CABLE 1-2/3" dia x 5/64" 2-61/64"
$37.36 $57.16
AISI 304 For tube
0 2231 CABLE 1-2/3" dia.
$55.02
Hand Rail Support
Hand Rail Support
Hand Rail Support
Square Flange Cover
4-1/8"
AISI 316 Hole Height
2 0523 16 CABLE 1-39/64" x 1-39/64" 19/32"
$31.89
H
Interior Only Exterior Rated Interior Only Exterior Rated
3-15/16" x 3-15/16"
2-3/4"
H
Complete with welded flange
3 pieces complete
AISI 316 Height H For Handrail F or Square Tube A
0 3721 CABLE 2-61/64" 1-2/3" dia. 1-9/16" x 1-9/16" x 5/64"
$56.51
AISI 316 Height H For Handrail For Square Tube A
0 3761 CABLE 2-61/64" 1-2/3" dia. 1-9/16" x 1-9/16" x 5/64"
$46.80
AISI 304 X H
0032 CABLE 1-9/16" SQ 39-3/8"
$129.47
Complete with wall flange
AISI 304 X H
0 0350 CABLE 1-9/16" SQ 47-1/4"
$212.04
Pre-drilling of Newels available with extended lead time. See Drill Form on page 17
STAINLESS STEEL Newel Posts Partially Pre-assembled in Square Sections
Adjustable Handrail Support Handrail Support
Ø1/2"
2-9/16"1-1/16"
H
A A
Ø1/2"
AA
H
Satin finish, with grain 240, complete with round bar
supports, mounting plate, and flange canopy
HY
*Y measurement is taken from center of holes.
AISI 304 AISI 316 Newel post dia. N° bar holderBar
diameterY* H
2 2412 09 CABLE 4 4212 09 CABLE 1-2/3" dia. x 5/64" 9 1/2" 4" 39-3/8"
$362.84 $506.22
XX
X
H
Satin finish, with grain size 240, complete with welded flange
AISI 304 AISI 316 X H
0042 CABLE 4 2316 CABLE 1-2/3" dia. x 5/64" 39-3/8"
$131.93 $238.00
Satin finish, with grain size 240, complete with lateral flange
X
H
2-3/
4"
AISI 304 X H
0 0450 CABLE 1-2/3" dia. x 5/64" 47-1/4"
$252.98
6 7
Newels Hand Rail Support | Newels
Glue Required
Interior Only Exterior Rated
1 x 19
8 9
Cable Connection
Cable
Adjustable Connector
Coupling Nut
Threaded Terminal
Threaded Inside Terminal
Fastening Screw
Cable | Cable Connectors
5/8" 5/32"
Finial with Hexagonal Head
AISI 316 Rope Min. Brake load 14,00 kN
F X328 WR CABLE 13/64" dia. / 5mm 328' Roll
$364.44
F X150 WR CABLE 13/64" dia. / 5mm 150' Roll
$166.66
AISI 316 Description
D07 CABLE Rounded head screw M 1/4" thread right
$3.31
D07 SX CABLE Rounded head screw M 1/4" thread left
$3.31
2-3/32"
Y
M6
AISI 316 left
AISI 316 right
Rope Y
TF05 SX CABLE TF05 DX CABLE 13/64" dia. 2-23/64"
$5.00 $5.00
AISI 316 Description
D06 CABLE Domed head nut right hand thread M 1/4"
$4.02
D06 SX CABLE Domed head nut left hand thread M 1/4"
$4.02
AISI 316 left
AISI 316 right
Rope Y
TM05 SX CABLE TM05 DX CABLE 13/64" dia. 2-23/64"
$5.22 $5.22
2-33/64"
AISI 316 Description
T 06 CABLE Domed head nut right hand thread M 1/4"
$6.40
AISI 303 Description
D05 CABLE Adjustable ropes with 2 M 1/4" thread
$34.58
AISI 303 For tube Hole
B061 CABLE 1-2/3" dia. 17/64" dia.
$8.00
Sloping Washer for Threaded Terminal
15/3
2" d
ia.
ED07
ETM05DX
ED05
ETM05DXED06
ETM05DX ETF05DX
ETM05DXETM05SX ET06
ETM05DX
ED06
EB071
EA05 EA05
ETTB05
ED06ETFM06DX
ETFT05 or ETFS05
ED06
ETFF04
ETMT06DX or ETMS06DX
ETFF05 ETFT05
ESF04
ED06SX
ETM04SX
EST04SX
E0124
ETM04DX
EST04DX
EXAMPLE OF APPLICATION
5/8"
1-5/8"
5/16" dia
YM
1/4
"
AISI 316 Description
TW05 DX CABLE Dowel Screw with right thread
$9.53
TW05 SX CABLE Dowel Screw with left thread
$9.53
3" length
2" screw1" thread
Interior Only Exterior Rated Wood Newels & Rail Interior Only10 11
INTRODUCING OUR NEW CRIMPLESS SYSTEM
No longer do you need a crimping tool to get the proper tension and fit for your cable railing projects. With Indital’s new Crimpless System it’s a snap! Just follow the instructions for an easy, tool free installation, then enjoy your new cable railing.
AISI 316 Rope A
T 3000 SM CABLE 13/64" dia. 3-3/4"
$28.56
1. Slide the tapered nut onto the cable.
2. Slide the grommet onto the cable with the flat end toward the tapered nut.
3. Insert cable into the bolt until grommet is sitting flush.
4. Screw ends together tightly, using set screw for added security.
Bolt
5. Add domed head nut to secure cable to the post. Add sloping washers to both sides if used on a rake.
Grommet Cable
Set Screw Tapered Nut
A
Crimpless Cable Connectors
Newels | Post to Post Hand Rail
Cham. Top 3-1/2"Universal Intermediate
400048"
400158"
400360"
2-5/8"
45-3/8" 53-3/8" 69-38"
Mush. Top 3-1/2"Universal IntermediateM-4004
48"M-4005
56"M-4006
72"
4-1/2"
43-1/2" 53-1/2"
Spade Top 3-1/2"Universal IntermediateS-4004
48"S-4005
58"
3"
6-1/4"
56-3/4"
Plain
4075
66"Inter.
3-1/2"
Eased Edged Moulding
Flat Shelf Moulding
3-1/2"
5"
55-1/4"
Plain
S-4075
63-3/4"Inter.
3-1/2"
4075 & S-4075Interchangeable pyramid and flat caps included.
Can also be purchased separately.
S-4075
4075
Wood Newels | Rail
6002
2-3/4"
1-5/8"
2-3/4"
6102
2-1/4"
1-5/8"
2-1/4"
12 13
How-To's | Care & MaintenanceAccessories
Stainless Steel Care & Maintenance
Cleaning Stainless Steel
Overcoming Rust
Check out the Installation videos for Indital Stainless Steel Stair Parts at:
www.CreativeStairParts.com or scan the code to the right >
Stainless Steel is generally very corrosion resistant and will perform satisfactorily in most environments. Its resistance primarily depends on the elemental makeup or grade used when exposed to a corrosive environment. AISI 304 grade is primarily used for interior applications, whereas, AISI 316 grade is used more for exterior applications due to its added resistance. Care would be needed in making sure to select the appropriate grade of stainless steel for your given application. The term stainless steel is quite superficial as it does indeed stain over time when not properly maintained. There are steps and precautions to take in keeping your stainless lasting over time.
Rinsing your stainless railing every few months with warm, fresh water and soap will usually suffice. Otherwise, a degreaser spray (E4051) offered by Indital USA can help remove most contaminants, smudges, fingerprints, and restore the shine. Indital USA also offers a polishing spray (E4052) which leaves a thin antistatic and water-repellent coat on the metallic surface.
Most hard to remove stains or scratches can be removed carefully using a coarse Scotch-Brite® Pad, but keep in mind you’ll want to scrub in the same direction of the grain.
When living in an area where there are high levels of contaminants (pools, coastal regions, chemical plants, etc), it is possible to see some potential corrosion, even when using a 316 grade stainless steel. You will want to make sure to clean your railing with the degreaser and polishing spray more often throughout the year. If any surface rust does appear, it is important to deal with it immediately rather than waiting. Indital USA offers a de-rusting solution (E4052/D) and a passivating paste (E4052/P) which are both products to clean up the iron traces from the stainless steel surfaces. They will clean, protect, and exalt the pre-existing brightness, while creating a protective oxide and chrome film on the stainless steel surface.
4051 CABLE
$26.93
4 0690 CABLE
$170.47
4 0580 CABLE
$187.11
4 0685 CABLE
$1,090.98
4054 CABLE
$117.31
4052 CABLE
$41.93
Degreaser spraySpray for cleaning all metal surfaces to be glued.
Leaves a thin antistatic and water-repellent coat on the treated metallic surfaces. It is recommended on finished products.
High strength adhesiveManual crimping tool. Hydraulic crimping tool for pressing the terminal support for wire ropes.
Generated power 50 kN
Shearing tool for wire ropes up to 5/16" dia.
Drilling Guide, patented for tubes dia. 1 1/3"- 1 2/3" - 1 7/8"
Tool for drilling radial holes dia. 9/32" - 11/32" - 7/16"
For threaded inserts and holes of M5 - M6 - M8 threadings
Drill guide works on FLAT RUNS ONLY.
Glue Required
Drilling Guide 1. Carefully measure how far apart you need your drill holes to be on your
newel posts.
2. Once you have the measurements, adjust the Drilling Template so that the guide holes are set at the exact distance your holes need to be on your newels.
3. Mark on your newels where the first hole needs to be drilled.
4. Slide the Drilling Template onto your newel, so that the guide holes line up with where your first hole needs to be.
5. Using the Drilling Template as a guide, drill holes into your newel.
6. Slide the Template down so that it lines up with your last hole and use other guide to drill a new hole.
7. Repeat as needed until you have all the holes drilled into your newel that you require.
14 15
WOOD BOLT CABLE RAKE SYSTEM
WOOD SCREW CABLE RAKE SYSTEM
B061 CABLE(WASHER)
D07 CABLE(SCREW)
F X150 WR CABLE(WIRE ROPE)
F X150 WR CABLE(WIRE ROPE)
TF05 DX CABLE
TF05 SX CABLE
(TERMINALS)
T 3000 SM CABLE
T 3000 SM CABLE(CRIMPLESS)
Basic Build DiagramsBasic Build Diagrams
*Options available with extended lead time.
HORIZONTAL GLASS SYSTEM
HORIZONTAL ROUND BAR SYSTEM
90
1 6000 CABLE
0119 CABLE(END CAP)
031 S1 CABLE(HANDRAIL SUPPORT)
0 3761 CABLE(HANDRAIL SUPPORT)
0042 CABLE(ROUND TUBE)
0069 CABLE
0385 CABLE(SCREW)
0129 CABLE(OPTIONAL SPHERICAL CAP)
5 6000 CABLEOR
EV105 /6000
020 CABLE
0032 CABLE(SQUARE TUBE)
2 0523 16 CABLE
E001/6000 CABLEE453
451 CABLE
0042 CABLE(ROUND TUBE)
E21404200(GLASS CLIP)
E21404200(GLASS CLIP)
E21500000(GLASS CLIP)
E21500000(GLASS CLIP)
020 CABLE 020 CABLE
3/8” - 1/2” glass useRUBBER GASKETSR1411 OR R1413
456 CABLE(Anchorage)
456 CABLE(Anchorage)
0042 CABLE(ROUND TUBE)
E0213E0213
16 17
1 1/3” to 2”
7947 Mesa Drive, Houston, Texas 77028 . 713.694.6065 . 1.800.772.4706 . www.indital.com
Drilling Specifications
Name:_____________________________________________________Company:_________________________________________________Address:__________________________________________________State:________________________________ ZIP:__________________Phone:____________________________________________________Email:_____________________________________________________
39 3/8”to
47 1/4”
Drilling Type? Wire Rope o Round Bar o Glass Clamps oIf wire, what diameter? 5/32” o 13/64” o 15/64” oType of Post? Regular 1 2/3” dia. Post o Heavy 2” dia Newel oMaterial? Stainless Steel o 316 grade Stainless o Galvanized oMounting? Side Mount o Flat oSide Mounted Handrail? oWhat diameter do you need? 1 1/3” o 1 2/3” o 2” oHeight of post? __________________________________ inchesDistance between drill holes on the post? Every __________ inchesHow wide do you want the drill holes to be? _____ inch diameterIf on an incline, stagger needed? __________ inchesAngle of drill holes? 220 o 180 o 90 o 45 oFlanges? oCustom Instructions: ________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________
Drill Interval?______ inches
WALL MOUNT WIRE ROPE RAKE SYSTEM
WALL MOUNT ROUND BAR SYSTEM
90
4100 CABLE(END CAP)
1 6000 CABLE
E011(END CAP)
B061 CABLE(WASHER)
0 0450 CABLE(NEWEL POST)
(WITH WALL MOUNT)
ED07(SCREW)
0 0450 CABLE(NEWEL WITH WALL MOUNT)
F X150 WR CABLE(WIRE ROPE)
0119 CABLE(END CAP)
E0045(NEWEL POST)
INCLUDES HANDRAILSUPPORT
0385 CABLE(SCREW)
E011(END CAP)
F X150 WR CABLE(WIRE ROPE)
TF05 DX CABLE
TF05 SX CABLE(TERMINALS)
E4260
E690/G(RAW)
E690(BEECH)
E692(WENGE)
E6080WALL
ANCHORAGEE0104
E0104
0 0450 CABLE(NEWEL POST)
0119 CABLE(END CAP)
5 6000 CABLE(ROUND BARS)
0119 CABLE(END CAP)
0129 CABLE(OPTIONAL SPHERICAL CAP)
E 00450 CABLE(NEWEL POST)
0385 CABLE(SCREW)
E0069(ROUND BAR HOLDER)
*Options available with extended lead time.
E605
E600/T
E600/T
Drilling Specifications Form
Quote Form for Drilling Specifications
$100.00 set up. $2.00 per hole
Basic Build Diagrams 1 1/3” to 2”
7947 Mesa Drive, Houston, Texas 77028 . 713.694.6065 . 1.800.772.4706 . www.indital.com
Drilling Specifications
Name:_____________________________________________________Company:_________________________________________________Address:__________________________________________________State:________________________________ ZIP:__________________Phone:____________________________________________________Email:_____________________________________________________
39 3/8”to
47 1/4”
Drilling Type? Wire Rope o Round Bar o Glass Clamps oIf wire, what diameter? 5/32” o 13/64” o 15/64” oType of Post? Regular 1 2/3” dia. Post o Heavy 2” dia Newel oMaterial? Stainless Steel o 316 grade Stainless o Galvanized oMounting? Side Mount o Flat oSide Mounted Handrail? oWhat diameter do you need? 1 1/3” o 1 2/3” o 2” oHeight of post? __________________________________ inchesDistance between drill holes on the post? Every __________ inchesHow wide do you want the drill holes to be? _____ inch diameterIf on an incline, stagger needed? __________ inchesAngle of drill holes? 220 o 180 o 90 o 45 oFlanges? oCustom Instructions: ________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________
Drill Interval?______ inches
1 1/3” to 2”
7947 Mesa Drive, Houston, Texas 77028 . 713.694.6065 . 1.800.772.4706 . www.indital.com
Drilling Specifications
Name:_____________________________________________________Company:_________________________________________________Address:__________________________________________________State:________________________________ ZIP:__________________Phone:____________________________________________________Email:_____________________________________________________
39 3/8”to
47 1/4”
Drilling Type? Wire Rope o Round Bar o Glass Clamps oIf wire, what diameter? 5/32” o 13/64” o 15/64” oType of Post? Regular 1 2/3” dia. Post o Heavy 2” dia Newel oMaterial? Stainless Steel o 316 grade Stainless o Galvanized oMounting? Side Mount o Flat oSide Mounted Handrail? oWhat diameter do you need? 1 1/3” o 1 2/3” o 2” oHeight of post? __________________________________ inchesDistance between drill holes on the post? Every __________ inchesHow wide do you want the drill holes to be? _____ inch diameterIf on an incline, stagger needed? __________ inchesAngle of drill holes? 220 o 180 o 90 o 45 oFlanges? oCustom Instructions: ________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________
Drill Interval?______ inches
Please submit form to [email protected].
18 19
DRAWING REQUEST FORMSTAINLESS STEEL
PROJECT NAME:
PROJECT ADDRESS:
CONTACT NAME:
TYPE OF SYSTEM
AISI 304 AISI 316
RAILING NEWEL POST
1-2/3" STAINLESS STEEL ROUND RAIL 1-2/3" STAINLESS STEEL ROUND POST TOP
1-3/4" WOOD RAIL (WOOD INOX) 1-9/16" STAINLESS STEEL CUBED TOP MOUNT
1-1/2" ROUND ADA COMPLIANT RAIL 1-2/3" STAINLESS STEEL ROUND POST SIDE MOUNT
1-9/16" SQUARE RAILING (CUBED) 1-9/16" STAINLESS STEEL CUBE SIDE MOUNT
1-3/16" METAL NEWEL POST
HANDRAIL SUPPORT
1-9/16" CUBE TOP MOUNT STEM WITH SADDLE 1-2/3" ROUND TOP MOUNT STEM WITH SADDLE
1-9/16" CUBE TOP MOUNT FLUSH - END CAP DRILLED 1-2/3" ROUND TOP MOUNT FLUSH
1-9/16" CUBE SIDE POST MOUNT 1-2/3" ROUND SIDE POST MOUNT
1-9/16" CUBE WALL MOUNT 1-2/3" ROUND WALL MOUNTED
TYPE OF SADDLE FOR SUPPORT
FLAT 1-1/3" - 1-1/2" DIA
1-2/3" DIA 1-7/8" DIA
1-1/3" -1-2/3" DIA 45° 1-1/3" -1-2/3" DIA 90°
STAIR INFORMATION
TYPE OF INFILL RISE: RUN:
CABLE SYSTEM TOTAL LENGTH: TOTAL HEIGHT:
ROUND BAR STAIR WIDTH: LANDING WIDTH:
GLASS THICKNESS:
SCROLL
DATE:SUBMITTED BY:
NotesDrawing Request Form1 1/3” to 2”
7947 Mesa Drive, Houston, Texas 77028 . 713.694.6065 . 1.800.772.4706 . www.indital.com
Drilling Specifications
Name:_____________________________________________________Company:_________________________________________________Address:__________________________________________________State:________________________________ ZIP:__________________Phone:____________________________________________________Email:_____________________________________________________
39 3/8”to
47 1/4”
Drilling Type? Wire Rope o Round Bar o Glass Clamps oIf wire, what diameter? 5/32” o 13/64” o 15/64” oType of Post? Regular 1 2/3” dia. Post o Heavy 2” dia Newel oMaterial? Stainless Steel o 316 grade Stainless o Galvanized oMounting? Side Mount o Flat oSide Mounted Handrail? oWhat diameter do you need? 1 1/3” o 1 2/3” o 2” oHeight of post? __________________________________ inchesDistance between drill holes on the post? Every __________ inchesHow wide do you want the drill holes to be? _____ inch diameterIf on an incline, stagger needed? __________ inchesAngle of drill holes? 220 o 180 o 90 o 45 oFlanges? oCustom Instructions: ________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________
Drill Interval?______ inches
Please submit form to [email protected].
AISI 304 AISI 316