v1/cp2018 par… · container door tie back loctite gasket glue (406) gavan code: gluelq form...

w w w.a n c ra a u s t ra l i a . co m

V 1 / C P 2 0 1 8

ANCRA Container Parts CatalogueFlooring & Accessories I Door Parts

Container Panels I Container Accessories & more

3www.ancraaustralia.com

CONTENTS

DOOR PARTS Container Layout Drawing................................. 04

Door Parts ............................................................. 04

Bloxwich Door Parts ............................................ 05

Alternative Door Parts ........................................ 06

Reefer Door Parts ................................................ 07

Door Gear Sets .................................................... 08

Locking Rod Sets ........................................... 08

Locking Rods .................................................. 08

Forged Handle Parts .................................... 08-09

Door Hinges: Dry ................................................. 10

Door Hinges: Pin .................................................. 11

Door Gaskets & Sets .......................................... 12

Door Parts ............................................................. 13

G-Strips ............................................................ 13

Loctite Gasket Glue ...................................... 13

DOOR SECURITY Door Security Seals ............................................. 13

CONTAINER ACCESSORIES Plywood Flooring ........................................... 14

Plywood Rebate Flooring ............................. 14

Floor Screws ................................................... 14

Masking Tape .................................................. 14

DECALS Letters & Numbers ....................................... 14

Decals: Weight Panels .................................. 15

Decals: General .............................................. 15

CSC Plates & Inspection Stickers .............. 15

CONTAINER SHEETS/PANELS Flat Sheets: Aluminium ................................ 16

Flat Sheets: Stainless Steel ......................... 16

Flat Sheets: Corten ....................................... 16

CORTEN ANGLES/HEADERS Corten Headers ............................................. 16

ROOF PANELS Corrgation Roof Panels ......................... 17-18

WALL PANELS Corten Side Wall Panel ................................. 19

Corten Wall Panel .......................................... 19

Cronos Side Wall Panel ................................. 20

CORTEN CHANNELS Corten Channels ........................................... 20

Corten Angles ................................................ 20

CORTEN DOOR SILLS Corten Door Sills ........................................... 20

Corten Front Sills ........................................... 21

CORNER POSTS Corner Posts: Front ....................................... 22

Corner Posts: Rear ........................................ 22

Corner Posts: Rear Inserts .......................... 22

REEFER PARTS Corten Top Side Rail ...................................... 23

Aluminium Reefer Flooring ......................... 23

Reefer Covings ............................................... 23

CONTAINER ACCESSORIESKazoos .................................................................... 24

Drain Plugs ............................................................. 24

Foam Products ..................................................... 24

Ventilators ............................................................. 25

Tarpaulin Products ............................................... 25

Corner Castings ................................................... 26

Container Straps .................................................. 26

Odour Neutraliser ................................................ 26

Cargo Jacking Bars .............................................. 27

Industrial Absorbents ......................................... 27

SAFETY GEAR Safety Gear: Masks (Dust & Respirator)......... 27

Safety Gear: Ear Plugs ........................................ 27

Safety Gear: Gloves ............................................ 27

CONTAINER CONSUMABLES Silicone ............................................................. 28

Abrasives: Cutting/Grinding ....................... 28

Abrasives: Sanding ........................................ 28

Drill Bits............................................................. 29

Fasteners: Rivets ........................................... 29

Nuts & Bolts .................................................... 29

TWISTLOCKS Twistlocks .............................................................. 30

Bridge Fitting ......................................................... 30

TERMS & CONDITIONS Terms &Conditions ............................................. 31

4CONTAINER PARTS CATALOGUE JULY-2017

CONTAINER LAYOUT DRAWING

Form 4:03:2013:08:28:41 Page 7 of 106

Container Layout Drawing

DOOR PARTSFollowing are the diagrams and part numbers for the standard parts of container door locking equipment for both standard dry boxes and reefer containers. We have available most of the variances that can be found to these standard parts. If you cannot find the part you want please enquire with our staff.

LG10040 Hinge Bush (Black Plastic)LG10553 Upper Long Reefer Split Bush (Male)LG10558 Lower Long Reefer Split Bush (Female)LG11028 Bearing Bracket Outer Large (Steel)LG12262 Bearing Bracket Outer Large (Steel)LG12272 Bearing Bracket Inner Large (Plastic)LG60002 Hinge LugLG82000 Hinge blade 63.5mm WideLG83900 Antirack ringLG84005/1 Rod Guide (Steel Outer Bracket Small)LG84006/1 Rod Guide Bearing (Plastic Insert)LG84011 Seal Plate (Retainer Plate)LG84012 Seal Pin (Customs Catch)LG87001 Keeper Right HandLG87002 Keeper Left HandLG87003 Cam Right HandLG87004 Cam Left HandLG87006 Bearing Bracket Inner Large (Steel)LG87007 Upper Small Plastic Split Bush (Male)LG87008 Lower Small Plastic Split Bush (Female)LG87009S Bearing Bracket Outer Small (Steel)LG87010S Bearing Bracket Inner Small (Steel)

LG87011 Rivet For Door HandleLG87030/1 Handle HubLG87031/1 BushLG87032 Customs Catch (Forged)LG87033 Retainer Plate ( Forged)LG87034 Handle (Forged)LG87044 Handle Flat (Pressed)LG87105 Large Outer Bracket ReeferLG87106 Large Inner Bracket Reefer LGCIMC06022 CIMC Reefer Hinge Blade 127mm x 225mm (Aluminium)LGDOORTIE Container Door TieLGSET Door Gear Complete Set - No Locking RodLGSETL Door Gear Set including Left Hand RodLGSETR Door Gear Set including Right Hand RodLGHF002 Hinge Blade 79mm WideLGLASHRING Lashing RingLGPIN Hinge Pin 110mm LongLGPIN2 Hinge Pin 162mm LongLGRODL Complete Left Hand Rod (Forged Handle)LGRODR Complete Right Hand Rod (Forged Handle)MHINGEB Steel Reefer Hinge 101mm x 241mm


BLOXWICH DOOR PARTS

LG87004Cam Left Hand

LG87002Keeper Left Hand

LG87006Bearing Bracket(Inner Large)

LG87010SBearing Bracket(Inner Small)

LG87008Lower Smaller PlasticSplit Bush (Female)

LG87030/1 Handle Hub

LG87011 Handle Rivet

LG87031/1 Bush

LG87032Custom Catch(Forged)

LG87033Retainer Plate(Forged)

LG87034Door Handle (Forged)

LG87001Keeper (Right Hand)

LG87003Cam (Right Hand)

LG83900Antirack Ring

LG11028Bearing Bracket(Outer Large)

LG87009SSmall Outer Bracket

LG87007Small Plastic Split Bush (Male)

LGBARLocking Bar


ALTERNATIVE DOOR PARTS



LG84006/1Rod Guide Bearing (Plastic Insert) LG84012

Seal Pin(Customs Catch)

LG84011Seal Plate (Retainer)

LG12262Bearing Bracket Outer Large


LG87030/1 Handle Hub

LG12272 Bearing Bracket (Inner Large)

LG87011 Handle Rivet

LG84005/1 Rod Guide(Small Outer Bracket)

LG12262 Bearing BracketOuter Large

LG87044 Handle Flat (Pressed)




REEFER DOOR PARTS




LG10558Lower Long Split Bush (Female)

LG87010S

LG87008

LG87010SBearing Bracket Inner (Small)

LG87106Bearing Bracket Inner (Large)

LG10558Lower Long Split Bush (Female)



LG87009SSmall Outer

Bracket

LG87011Handle Rivet

LGBARLocking Rod

LG87007Small Plastic

Split Bush (Male)

LG87009SSmall Outer

(Bracket)

LG87105Large Outer

(Bracket Reefer)

LG10553Upper Long

Split Bush (Male)

LG87034Door Handle (Forged)

LG87032Custom Catch (Forged)

LG87033Retainer Plate (Forged)

LG87008Lower Small Plastic Split Bush (Female)

LG87030/1Handle Hub

LG87031/1Bush


DOOR GEAR SETS

LGSET CONTENTS

LG87001 X 1

LG87002 X 1

LG87033 X 1

LG87032 X 1

LG87031/1 X 1

LG12262 X 2

LG12272 X 2

LG87007 X 1

LG87008 X 1

LG87009S X 1

LG87010S X 1

DOOR GEAR SETS

LOCKING ROD SETSLocking Rod Sets contain full contents of LGSET (detailed above) PLUS one rod per set (LEFT or RIGHT).PART No: LGSETL (left)PART No: LGSETR (right, shown)

LOCKING RODSRods are also available as individual itemsPART No: LGRODL (left)PART No: LGRODR (right)

FORGED DOOR HANDLEPART No: LG87034

10.5322

33

139

FORGED HANDLE PARTS


FORGED HANDLE PARTS

FORGED CUSTOMER CATCH FORGED RETAINER PLATEPART No: LG87032

RETAINER/CUSTOM CATCH BUSHPART No: LG87031/1

PART No: LG87033

PRESSED HANDLEPART No: LG87044

32

350

80 40 80

FLAT HANDLE RETAINER FLAT HANDLE CUSTOM CATCHPART No: LG84011 PART No: LG84012


DOOR HINGES: DRY

63.5MM DOOR HINGE

79MM DOOR HINGE

PART No: LG82000

PART No: LGHF002

HINGE LUGPART No: LG60002

INTERNAL LASHING RINGPART No: LGLASHRING


DOOR HINGES: PIN

101MM STEEL REEFER HINGE

ALUMINIUM REEFER HINGE 127MM (CIMC)

PART No: MHINGEB

PART No: LGCIMC06022

108MM HINGE PIN (DRY BOX)

REEFER HINGE PIN 162MM

PART No: LGPIN

PART No: LGPIN2


Form 4:03:2013:08:28:41 Page 28 of 106

Door Gasket Set

Door Gasket Set

Gavan Code: GK950SET

Gavan Code: GK950-1

Form 4:03:2013:08:28:41 Page 28 of 106

Door Gasket Set

Door Gasket Set

Gavan Code: GK950SET

Gavan Code: GK950-1

PART No: GK950 PART No: GK955

PART No: GK969PART No: GK958

PART No: GK966

SECTION A-A Typical Section

SECTION C-C Both Side Section

SECTION B-B Both Side Section

PART No: GK950SET


PART No: GK965PART No: GK960


DOOR GASKETS & SETS

DOOR GASKET SET

40.00

23.5028.46

32.44

45.55

35.74 48.50

24.00

35.00

24.00

30.00

27.43

13.98

30.00

44.00

45.00

47.00

25.00

30.00

44.50

28.92

17.55

42.5036.00

9.50

46.00

35.00

44.00

24.00

42.00

29.5012.50

46.00

11.00

24.00

35.50


DOOR PARTS

G-STRIPS

LOCTITE GASKET GLUE

LOCTITE GASKET GLUE (406) - 25ML BOTTLE

FLAT G-STRIP

ANGLE G-STRIP

Form 4:03:2013:08:28:41 Page 29 of 106

G-Strips and Loctite Gasket Glue

Flat G-Strip

Galvanised Steel 25mm x 2400mm x 1.0mm

Gavan Code: GSTRIP Angle G-Strip

Galvanised Steel 25mm x 10mm x 2400mm x 1.0mm

Gavan Code: GSTRIP2

Loctite Gasket Glue (406) Gavan Code: GLUELQ

Form 4:03:2013:08:28:41 Page 29 of 106

G-Strips and Loctite Gasket Glue

Flat G-Strip

Galvanised Steel 25mm x 2400mm x 1.0mm

Gavan Code: GSTRIP Angle G-Strip

Galvanised Steel 25mm x 10mm x 2400mm x 1.0mm

Gavan Code: GSTRIP2

Loctite Gasket Glue (406) Gavan Code: GLUELQ

PART No: GLUELQ

PART No: GSTRIP Galvanised Steel 25mm x 2400mm x 1.0mm

PART No: GSTRIP2 Galvanised Steel 25mm x 10mm x 2400mm x 1.0mm

Form 4:03:2013:08:28:41 Page 20 of 106

Shipping Container Safety and Security

Container Door Tie Back Gavan Code: LGDOORTIE

Manufactured with strong wire rope as required by ISO requirement.

Under American Occupational Health and Safety Rules, Door Tie Backs must be attached to all containers and be made of “Wire”.

Container Lock Box With Key Gavan Code: LGDOORLOCK

High security door lock that is bolted to the shipping container or trailer door with bolts through the

door only accessible from the inside. This door lock is a secure way to help prevent unauthorised intrusions by crowbar or bolt cutters. The door lock includes two individually cut keys which is ideal in the supply chain – one key can be retained at the packing / loading location and the second key can be retained at the unpacking / discharge location ensuring cargo securement throughout the journey.

CONTAINER DOOR TIE BACKPART No: LGDOORTIE Manufactured with strong wire rope as required by ISO requirement.

Under American Occupational Health and Safety Rules, Door Tie Backs must be attached to all containers and be made of “Wire”.

DOOR SECURITY

VARIOUS SECURITY SEALSPART No: LGDOORLOCKHS

For trucks, shipping containers, rail wagons, bonded stores, or general application. We offer several different types of security seals: All of these tamper evident seals are impossible to open without destroying or visibly damaging the seal, therefore preventing theft and/or contamination of goods in transit or storage.

(2)(1)(3)

(4)

(5)

(1) SECURITY BOLT SEAL 4MM SHAFT SEALBOLT3(2) HIGH SECURITY BOLTS SEAL (11.7MM DIAM) SEALBOLT(3) PLASTIC STRIP SEAL SEALPLAST(4) STEEL STRIP SEAL SEALSTEEL(5) ZIP TYPE PLASTIC SEAL SEALTRANS


CONTAINER ACCESSORIES

Container Plywood is manufactured to comply. Treated with Basileum SI-84 (with regard to the Australian regulations).This plywood meets all food grade requirements. We can supply other plywood sizes, as well as Bamboo Eco plywood, upon request.Minimum order quantities and lead times apply for these product requests.

PART No: FPLYSHEET SIZE: 2440 X 1220 X 28 MM SHIPPING CONTAINER FLOOR LAMINATION AQIS APPROVED - 19 LAMINATIONS

2440mm

28mm

1220

mm

PLYWOOD REBATE FLOORING

2400mm

28mm

1160

mm

Rebated: 25mmL x 5mmD

PLYWOOD FLOORING


PART No: FPLY-REBATEREBATED PLY FLOORING WITH NICHE EDGING FOR SNUG FIT FOR CONTAINER FLOOR SIZE 1160MM X 2400 X 28MM WITH REBATE EDGE OF 5MM X 25MM

FLOOR SCREWS

(1) PART No: DS65L Large Head Floor Screw 60mm Long x 16mm Head (900/Bx)(2) PART No: DS60S Small Head Floor Screw 65mm Long x 12mm Head (10 00/Bx)(3) PART No: DS60W Self Tapping Floor Screw 65mm Long x 12mm Head (1200/Bx)(4) PART No: PDRIVE Deck Screw Phillips Bit (P3) 31mm Long

PART No: MT48 48mm x 50mtr Roll

MASKING TAPE

Form 4:03:2013:08:28:41 Page 24 of 106

Masking Tape and Tarpaulins

MASKING TAPE

Gavan Code: MT24 24mm x 50mtr Roll Gavan Code: MT36 36mm x 50mtr Roll Gavan Code: MT48 48mm x 50mtr Roll

TARPAULINS

We stock and can manufacture both 40ft and 20ft tarpaulins using especially imported 3.2m material. Tarps supplied by Gavan are 630gsm which comply with current ISO standards.

We also have plans of most of the tarps used and can dispatch throughout Australia.

We can make all types of container tarps as well as open side tarps.

(1) (2) (3) (4)

100MM – BLACK PART No: D100B- A-Z & 0-9100MM – WHITE PART No: D100W- A-Z & 0-9100MM – BLACK ON WHITE PART No: D100BW- A-Z & 0-950MM – BLACK PART No: D50B- A-Z & 0-950MM – WHITE PART No: D50W- A-Z & 0-950MM – BLACK ON WHITE PART No: D50BW- A-Z & 0-9

INDIVIDUAL LETTERS AND NUMBERS

Form 4:03:2013:08:28:41 Page 30 of 106

Decals: Individual letters and numbers

100MM – BLACK Gavan Code: D100B- A-Z & 0-9 100MM – WHITE Gavan Code: D100W- A-Z & 0-9 100MM – BLACK ON WHITE Gavan Code: D100BW- A-Z & 0-9 50MM – BLACK Gavan Code: D50B- A-Z & 0-9 50MM – WHITE Gavan Code: D50W- A-Z & 0-9 50MM – BLACK ON WHITE Gavan Code: D50BW- A-Z & 0-9

OTHER SIZES AND COLOURS AVAILABLE PRICE ON REQUEST. MINIMUM ORDER 10 OF EACH TYPE

Gavan can produce any fleet decal to suit - just fax details for a quote.

DECALS


DECALS

PART No: DZEB 9’6” Zebra Strip Decal

PART No: DHM2.6 Height Mark Decal 8’6” Black On Yellow

PART No: DHM2.9 Height Mark Decal 9’6” Black On Yellow

PART No: DCAUTION Black On Yellow

PART No: DCAUTION3 Black On Yellow

DECALS: WEIGHT PANELS

DECALS: GENERAL

Form 4:03:2013:08:28:41 Page 31 of 106

Decals: Weight Panels

Standard 24 Ton. Available in Black, White & Black On White

Gavan Code: DWPB24

Left Side Only. Available in Black, White & Black On White

Gavan Code: DWPBMAX

Custom Manufactured To Depots Requirements.

Gavan Code: DWPBN

Form 4:03:2013:08:28:41 Page 31 of 106

Decals: Weight Panels

Standard 24 Ton. Available in Black, White & Black On White

Gavan Code: DWPB24

Left Side Only. Available in Black, White & Black On White

Gavan Code: DWPBMAX

Custom Manufactured To Depots Requirements.

Gavan Code: DWPBN

PART No: DWPB24 Standard 24 Ton. Avail. in B&W PART No: DWP24 & Black On White

PART No: DWPBMAX Left Side Only. Avail. in B&W & Black On White

2,6m8' 6"CAUTION

9'6"HIGH

2,9m9' 6" CAUTION

2.9 9 HIGH12

Form 4:03:2013:08:28:41 Page 34 of 106

CSC Plates & Inspection Stickers

Small CSC Inspection Plate 200mm Wide x 100mm High

Gavan Code: CSC

Large CSC Inspection Plate 200mm Wide x 250mm High

Gavan Code: CSC2

CSC Re-Inspection Label

Available in individual labels or rolls of 600 stickers

Gavan Roll Code: CSCRELABEL Gavan Sticker Code: CSCSTICKER

CSC RE-INSPECTION LABELPART ROLL No: CSCRELABELPART STICKER No: CSCSTICKER Available in individual labels or rolls of 600 stickers

Form 4:03:2013:08:28:41 Page 34 of 106



Gavan Code: CSC


Gavan Code: CSC2




SMALL CSC INSPECTION PLATEPART No: CSC200mm Wide x 100mm High

Form 4:03:2013:08:28:41 Page 34 of 106



Gavan Code: CSC


Gavan Code: CSC2




LARGE CSC INSPECTION PLATEPART No: CSC2200mm Wide x 250mm High


CONTAINER SHEETS/PANELS

Form 4:03:2013:08:28:41 Page 42 of 106

Flat Sheets: Aluminium and Stainless

ALUMINIUM SHEET

Aluminium Sheet 1200mmx2400mm x 1.0mm Gavan Code: ALU1.0



Powder Coated Aluminium 1200mmx2400mm x 1.0mm Gavan Code: ALU1.0PC


All other sheet sizes are available upon request. Please contact your local branch for more information regarding your requirements. STAINLESS STEEL FLAT SHEET

Stainless Sheet G304 - 2B 1200mm x 2400mm x 0.9mm Gavan Code: SS0.9


Form 4:03:2013:08:28:41 Page 42 of 106

Flat Sheets: Aluminium and Stainless

ALUMINIUM SHEET






All other sheet sizes are available upon request. Please contact your local branch for more information regarding your requirements. STAINLESS STEEL FLAT SHEET



Form 4:03:2013:08:28:41 Page 43 of 106

Flat Sheets: Corten CORTEN FLAT SHEET

Corten Sheet 1185 x 2380 x 1.6mm Gavan Code: ST1.6

Corten Sheet 1185 x 2700 x 1.6mm Gavan Code: ST1.6H








Sheet sizes may vary occasionally please check the size you require when ordering. Gavan can cut any width and length as requested.

ALUMINIUM SHEET

STAINLESS STEEL FLAT SHEET

CORTEN FLAT SHEET

Aluminium Sheet 1200mmx2400mm x 1.0mm PART No: ALU1.0Aluminium Sheet 1200mmx2400mm x 1.2mm PART No: ALU1.2Aluminium Sheet 1200mmx2400mm x 1.6mm PART No: ALU1.6Powder Coated Aluminium 1200mmx2400mm x 1.0mm PART No: ALU1.0PCPowder Coated Aluminium 1200mmx2400mm x 1.6mm PART No: ALU1.6PC

Stainless Sheet G304 - 2B 1200mm x 2400mm x 0.9mm PART No: SS0.9Stainless Sheet G304 - 2B 1200mm x 2400mm x 1.5mm PART No: SS1.5

Corten Sheet 1185 x 2380 x 1.6mm PART No: ST1.6Corten Sheet 1185 x 2700 x 1.6mm PART No: ST1.6HCorten Sheet 1225 x 2380 x 2.0mm PART No: ST2.0Corten Sheet 1225 x 2743 x 2.0mm PART No: ST2.0HCorten Sheet 1200 x 2400 x 3.0mm PART No: ST3.0Corten Sheet 1320 x 2420 x 4.0mm PART No: ST4.0Corten Sheet 1360 x 2420 x 4.5mm PART No: ST4.5Corten Sheet 1302 x 2420 x 6.0mm PART No: ST6.0Corten Sheet 1460 x 2700 x 6.0mm PART No: ST6.0H

All other sheet sizes are available upon request. Please contact your local branch for more information regarding your requirements.

Sheet sizes may vary occasionally please check the size you require when ordering.

CORTEN ANGLES/HEADERS

Form 4:03:2013:08:28:41 Page 54 of 106

Corten Headers

Header Channel 112.5 x 113 x 137.5 x 2420 x 4.0mm

Gavan Code: HEADERI

Header Plate 105 x 36 x 270 x 2420 x 4.0mm

Gavan Code: HEADERO

Form 4:03:2013:08:28:41 Page 54 of 106

Corten Headers

Header Channel 112.5 x 113 x 137.5 x 2420 x 4.0mm

Gavan Code: HEADERI

Header Plate 105 x 36 x 270 x 2420 x 4.0mm

Gavan Code: HEADERO

CORTEN HEADERS

PART No: HEADERI Header Channel 112.5 x 113 x 137.5 x 2420 x 4.0mm

PART No: HEADERO Header Plate 105 x 36 x 270 x 2420 x 4.0mm


ROOF PANELS

Form 4:03:2013:08:28:41 Page 44 of 106

Roof Panels

Corten five corrugation roof panel

2.0mm fully primed Gavan Code: ROOFP

Form 4:03:2013:08:28:41 Page 44 of 106

Roof Panels



Form 4:03:2013:08:28:41 Page 44 of 106

Roof Panels



CORTEN FIVE CORRUGATION ROOF PANEL

2.0mm fully primed PART No: ROOFPSECTION A-A

DETAIL B

Form 4:03:2013:08:28:41 Page 45 of 106

Corten three corrugation roof panel

2.0mm fully primed Gavan Code: ROOFP3

Form 4:03:2013:08:28:41 Page 45 of 106



Form 4:03:2013:08:28:41 Page 45 of 106



CORTEN THREE CORRUGATION ROOF PANEL

2.0mm fully primed PART No: ROOFP3

SECTION B-B

Form 4:03:2013:08:28:41 Page 45 of 106



Form 4:03:2013:08:28:41 Page 44 of 106

Roof Panels




Form 4:03:2013:08:28:41 Page 46 of 106

Corten four corrugation roof panel 2.0mm fully primed

Gavan Code: ROOFP4

ROOF PANELS

Form 4:03:2013:08:28:41 Page 46 of 106


Gavan Code: ROOFP4

Form 4:03:2013:08:28:41 Page 46 of 106


Gavan Code: ROOFP4

CORTEN FOUR CORRUGATION ROOF PANEL

2.0mm fully primed PART No: ROOFP4

Form 4:03:2013:08:28:41 Page 46 of 106


Gavan Code: ROOFP4

Form 4:03:2013:08:28:41 Page 47 of 106

Corten five corrugation roof patch 2.0mm fully primed

Gavan Code: ROOFPE2

Form 4:03:2013:08:28:41 Page 47 of 106


Gavan Code: ROOFPE2

Form 4:03:2013:08:28:41 Page 47 of 106


Gavan Code: ROOFPE2

CORTEN FIVE CORRUGATION ROOF PATCH

2.0mm fully primed PART No: ROOFPE2


WALL PANELS

Form 4:03:2013:08:28:41 Page 48 of 106

Wall Panels: Corten Side

CORTEN SIDE WALL PANELS

Available in 8’6” and 9’6”

1.6mm x 2375mm x 1116mm Gavan Code: PSWA

1.6mm x 2742mm x 1116mm Gavan Code: PSWAH

Gavan can also manufacture any size patch to suit most panel profiles. Please contact your local sales representative for more information.

Form 4:03:2013:08:28:41 Page 49 of 106

Wall Panels: Corten Front CORTEN FRONT WALL PANELS


2.0mm x 1024mm x 2400mm Gavan Code: PFR

2.0mm x 1024mm x 2700mm Gavan Code: PFRH

Gavan can also manufacture any size patch to suit most panel profiles. Please contact your local sales rep for more information.

Form 4:03:2013:08:28:41 Page 48 of 106

Wall Panels: Corten Side



1.6mm x 2375mm x 1116mm Gavan Code: PSWA

1.6mm x 2742mm x 1116mm Gavan Code: PSWAH

Gavan can also manufacture any size patch to suit most panel profiles. Please contact your local sales representative for more information.

Form 4:03:2013:08:28:41 Page 49 of 106

Wall Panels: Corten Front CORTEN FRONT WALL PANELS


2.0mm x 1024mm x 2400mm Gavan Code: PFR

2.0mm x 1024mm x 2700mm Gavan Code: PFRH

Gavan can also manufacture any size patch to suit most panel profiles. Please contact your local sales rep for more information.


CORTEN FRONT WALL PANELS


1.6mm x 2375mm x 1116mm PART No: PSWA 1.6mm x 2742mm x 1116mm PART No: PSWAH


2.0mm x 1024mm x 2400mm PART No: PFR 2.0mm x 1024mm x 2700mm PART No: PFRH


WALL PANELS

Form 4:03:2013:08:28:41 Page 50 of 106

Wall Panels

Cronos side wall panel 2507mm long x 1075mm wide x 2.0mm Corten

Gavan Code: PCRONOS

Form 4:03:2013:08:28:41 Page 50 of 106

Wall Panels

Cronos side wall panel 2507mm long x 1075mm wide x 2.0mm Corten

Gavan Code: PCRONOS

CRONOS SIDE WALL PANEL

2507mm long x 1075mm wide x 2.0mm Corten PART No: PCRONOS

CORTEN CHANNELS

Form 4:03:2013:08:28:41 Page 52 of 106

Corten Channels

Corten channels are available in standard sizes listed below or manufactured to suit your personal needs. Please quote outside measurements when ordering manufactured channels. CORTEN CHANNEL

Corten Channel 45x80x45x2350x4.0mm Gavan Code: C458045





Form 4:03:2013:08:28:41 Page 52 of 106

Corten Channels

Corten channels are available in standard sizes listed below or manufactured to suit your personal needs. Please quote outside measurements when ordering manufactured channels. CORTEN CHANNEL






CORTEN CHANNEL

Corten channels are available in standard sizes listed below. Other sizes imported on request.

Corten Channel 45x122x45x2350x4.0mm PART No: C4512245 Corten Channel 75x122x45x2350x4.0mm PART No: C751224

Form 4:03:2013:08:28:41 Page 53 of 106

Corten Angles

Corten angels are available in standard sizes listed below or manufactured to suit your personal needs. Please quote outside measurements when ordering manufactured angels. CORTEN ANGLE

Corten Angle 100x50x2350x4.0mm Gavan Code: A100/50




Corten Angle 50x30x2350x6.0mm Gavan Code: A50/306MM

Form 4:03:2013:08:28:41 Page 53 of 106

Corten Angles

Corten angels are available in standard sizes listed below or manufactured to suit your personal needs. Please quote outside measurements when ordering manufactured angels. CORTEN ANGLE





Corten Angle 50x30x2350x6.0mm Gavan Code: A50/306MM

CORTEN ANGLES

Corten angels are available in standard sizes listed below.Other sizes imported on request.

Corten Angle 120x50x2350x4.0mm PART No: A120/50 Corten Angle 50x30x2350x6.0mm PART No: A50/306MM


CORTEN DOOR SILLS

Form 4:03:2013:08:28:41 Page 55 of 106

Corten Door Sills

Corten Rear (Door) Sill 113mm Top

Gavan Code: SILLR


Gavan Code: SILLR120

Gavan can also manufacture non standard sills and rails to meet your requirements. Please contact your local sales representative for more information.

Form 4:03:2013:08:28:41 Page 56 of 106

Corten Front Sills

Corten Front Sill

80mm Top Gavan Code: SILLF

Corten Front Sill 60mm Top

Gavan Code: SILLF60


Form 4:03:2013:08:28:41 Page 55 of 106

Corten Door Sills


Gavan Code: SILLR




Form 4:03:2013:08:28:41 Page 56 of 106

Corten Front Sills

Corten Front Sill



Gavan Code: SILLF60


CORTEN DOOR SILLS

CORTEN FRONT SILLS

Form 4:03:2013:08:28:41 Page 55 of 106

Corten Door Sills


Gavan Code: SILLR




Form 4:03:2013:08:28:41 Page 56 of 106

Corten Front Sills

Corten Front Sill



Gavan Code: SILLF60


Corten Rear (Door) Sill 113mm Top PART No: SILLR Corten Rear (Door) Sill 120mm Top PART No: SILLR120

Corten Front Sill 80mm Top PART No: SILLF Corten Front Sill 60mm Top PART No: SILLF60


CORNER POSTS

CORTEN CORNER POSTS - FRONT

CORTEN CORNER POSTS - REAR

CORTEN CORNER POSTS - REAR INSERTS

CORTEN - TOP RAILS

Form 4:03:2013:08:28:41 Page 58 of 106

Corner Posts

Corten Corner Post 8’6” – 2420mm Long

Gavan Code: CNRPOST

Corten Corner Post High Cube

9’6” – 2745mm Long Gavan Code: CNRPOSTH

Corten Rear Corner Post 8’6” – 2400mm Long

Gavan Code: CNRPOSTR

Corten Rear Corner Post High Cube

9’6” – 2700mm Long Gavan Code: CNRPOSTRH

Corten Rear Corner Post Insert 40x113x40x2353mm

Gavan Code: CNRPOSTI

Corten Rear Corner Post Insert High Cube

40x113x40x2657mm Gavan Code: CNRPOSTIH

PART No: CNRPOST Corten Corner Post 8’6” – 2420mm Long PART No: CNRPOSTH Corten Corner Post High Cube 9’6” – 2745mm Long

PART No: CNRPOSTR Corten Rear Corner Post 8’6” – 2400mm Long PART No: CNRPOSTRH Corten Rear Corner Post High Cube 9’6” – 2700mm Long

PART No: CNRPOSTI Corten Rear Corner Post Insert 40x113x40x2353mm PART No: CNRPOSTIH Corten Rear Corner Post Insert High Cube 40x113x40x2657mm

PART No: TOPRAIL60 Corten Steel Top Rail - Blasted and Primed Square Tube 60mm x 60mm x 5720mm x 3.0mm

TOP

113mm

6mm

40m

m

60mm

3mm

60m

m

40m

m30mm

230mm 50mm

16.0

3-90º

30m

m

156m

m

75mm

56mm

171mm

75m

m


Form 4:03:2013:08:28:41 Page 85 of 106

Reefer Covings

PVC Door Moulding Gavan Code: RFDM01



REEFER PARTS

CORTEN TOP SIDE RAIL - REEFER

Form 4:03:2013:08:28:41

Page 75 of 106

Reefer Parts: C

orten Top Rail

C

orten Top Side R

ail 2400m

m Long x 4.0m

m C

orten Steel G

avan Code: TO

PRA

ILRF

PART No: TOPRAILRF CortenSteel 2400mm Long x 4.0mm

ALUMINIUM REEFER FLOORING

Form 4:03:2013:08:28:41 Page 80 of 106

Aluminium Reefer Flooring

Both sections are available in 3000mm and 1800mm lengths.

Top Section Gavan Code: RFAFT & RFAFT1.8

Bottom Section Gavan Code: RFAFB & RFAFB1.8

Form 4:03:2013:08:28:41 Page 80 of 106





Form 4:03:2013:08:28:41 Page 80 of 106





Both sections are available in 3000mm lengths.

PART No: RFAFT Top Section PART No:RFAFB Bottom Section

TOP SECTION RFAFT

BOTTOM SECTION RFAFB

REEFER COVINGS

Form 4:03:2013:08:28:41 Page 85 of 106

Reefer Covings




Form 4:03:2013:08:28:41 Page 86 of 106




PVC Door Ledge

Gavan Code: RFL001

Form 4:03:2013:08:28:41 Page 86 of 106




PVC Door Ledge

Gavan Code: RFL001

Form 4:03:2013:08:28:41 Page 85 of 106

Reefer Covings




VC DOOR MOULDINGS

PART No: RFDM01PART No: RFDM03PART No: RFDM04PART No: RFDM05PART No: RFDM012

PART No: RFDM01

PART No: RFDM05 PART No: RFDM012PART No: RFDM04

PART No: RFDM03



KAZOOS

Durable black rubber drain hose for refrigerated shipping containers.Available in two sizes.

KAZOO LARGE: 85mm Long PART No: KAZOOLKAZOO SMALL: 80mm Long PART No: KAZOO

DRAIN PLUGS

PART No: RFDSALI REEFER DRAIN SYSTEM - ALUMINIUM PIPE PART No: RFDSAD REEFER DRAIN SYSTEM - AUTO DRAIN INNERPART No: RFDSP REEFER DRAIN SYSTEM - PLASTIC EXIT PIECEPART No: DP32 38mm (TOP) 32mm (BASE)

DP32 DRAIN PLUG

PART No: RFDSALIREEFER DRAIN SYSTEM

PART No: RFDSPPLASTIC EXIT PIECE

PART No: RFDSADAUTO DRAIN INNER

POURING FOAMPART No: FOAMHP40 ISO PART A&B POURING FOAM Free Rise Density = 32KG/M3

FOAM PRODUCTS


VENTILATORS/TARPAULIN

Form 4:03:2013:08:28:41 Page 35 of 106

Ventilators

Small Vent for Use Inside Exterior Corrugation Gavan Code: VENTS

(Colour May Vary)

SMALL VENT FOR USE INSIDE EXTERIOR CORRUGATIONPART No: VENTSColour may vary

TARPAULIN PRODUCTS

TARPAULIN WIRE. AVAILABLE IN 20’ & 40’

COMPLETE TARPAULIN EYELETS - ROUND

TARP WIRE END CLIP SET

PART No: TW20 & TW40PART No: TEYER Supplied C/W front and back

PART No: TCLIP

68.00

42.00

205.00180.00


CORNER CASTINGS/TIEDOWN/POURING FOAM

PART No: CCBR CORNER CAST BOTTOM RIGHT

PART No: CCBL CORNER CAST BOTTOM LEFT

PART No: CCTL CORNER CAST TOP LEFT

PART No: CCTR CORNER CAST TOP RIGHT

Weight 11.50 kg High quality Cast Steel Aldur s45. Shotblasted, primed and machined on six sides. Manufactured in accordance with ISO 1161

BOTTOM LEFT

BOTTOM RIGHT

TOP RIGHT

TOP LEFT

SHIPPING CORNER CASTINGS

CONTAINER STRAPS

CONTAINER TIEDOWN STRAP 9MX50MMXLC2TPART No: RT-TTD/C3 Container Tiedown Strap 9mx50mmxLC2T

ODOUR NEUTRALISER

SHIPPING CONTAINER ODOUR NEUTRALISERPerfect for removing the after smell of food or fish products from containers. Available in 5ltr containers.Various sizes and strengths available upon request.

PART No: PS50


CARGO BARS/ABSORBANTS

CARGO JACKING BARS

Cargo bars offer strong support for your cargo. Cargo bars expand to fit tightly against the sides of a container or truck walls and lock in place without excessive pressure. Cargo bars feature 2” x 4” bolt-on padded feet for no-slip traction once they are extended to appropriate pressure. These adjustable round steel tube load bars are made of high-quality steel and adjust from 2175mm to 2910mm.

JACKING BAR WWL 600kg PART No: RT-JACKBAR

INDUSTRIAL ABSORBENTS

SAFETY GEAR

SUKERUP ABSORBENT

MASKS : DUST & RESPIRATOR

HALF MASK RESPIRATOR WITH DUEL FILTERS

LEATHER RIGGERS GLOVES

EAR PLUGS

WELDING GLOVES

Form 4:03:2013:08:28:41 Page 96 of 106

Industrial Absorbents

Gavan Code: DG-ABSFLR50L

Sukerup Organic Absorbent is 100% organic and contains no chemical residues. It is made from ground coconut husk milled to the right particle size to allow maximum absorbtion. The reason it is such an effective absorbent is each particle is made up tiny capillaries that together work as thousands of micro sponges. Sukerup Organic is an annually renewable resource that is safe for the workplace and the environment. It absorbs much quicker and more efficiently than clay based absorbents and does not become slippery. This means a quicker response and cleanup, less absorbent used and cheaper disposal costs.

No toxins or chemical residues Free of harmful dust Absorbs many times its weight Meets EPA requirements Natural inert material Bio-degradable Suitable for hydrocarbon and aqueous spills Made from renewable resources

Sukerup absorbent is also available in 15 Litre bags upon request.

Form 4:03:2013:08:28:41 Page 97 of 106

Safety Gear: Masks (Dust & Respirator)

P2 Dust Masks with filter (12 Per Carton)

Gavan Code: SGDMASK2

Half mask respirator with duel filters

Gavan Code: SGHALFMASK

Form 4:03:2013:08:28:41 Page 97 of 106

Safety Gear: Masks (Dust & Respirator)

P2 Dust Masks with filter (12 Per Carton)

Gavan Code: SGDMASK2

Half mask respirator with duel filters

Gavan Code: SGHALFMASK

Form 4:03:2013:08:28:41 Page 99 of 106

Safety Gear: Gloves

Cowhide leather riggers gloves Available in two sizes

Large Gavan Code: SG-GLVRIGLGE

X-Large Gavan Code: SG-GLVRIGXLGE

High quality welding gloves Gavan Code: SG-GLVWELD

(Brand may vary from store to store)

Sukerup Organic Absorbent is 100% organic and contains no chemical residues. It is made from ground coconut husk milled to the right particle size to allow maximum absorbtion.The reason it is such an effective absorbent is each particle is made up tiny capillaries that together work as thousands of micro sponges. Sukerup Organic is an annually renewable resource that is safe for the workplace and the environment. It absorbs much quicker and more efficiently than clay based absorbents and does not become slippery. This means a quicker response and cleanup, less absorbent used and cheaper disposal costs.

PART No: DG-ABSFLR50LSukerup absorbent is also available in 15 Litre bags upon request.

• No toxins or chemical residues• Free of harmful dust• Absorbs many times its weight• Meets EPA requirements

• Natural inert material• Bio-degradable• Suitable for hydrocarbon and aqueous spills• Made from renewable resources

PART No: SGDMASK2 P2 Dust Masks with filter (12 Per Carton)

PART No: SGHALFMASK

PART No: SGEPLUG2 Un-Corded ear plugs Protects up to 110db (200 Pairs per carton)

PART No: SG-GLVWELD High quality welding gloves

Form 4:03:2013:08:28:41 Page 99 of 106

Safety Gear: Gloves

Cowhide leather riggers gloves Available in two sizes

Large Gavan Code: SG-GLVRIGLGE

X-Large Gavan Code: SG-GLVRIGXLGE

High quality welding gloves Gavan Code: SG-GLVWELD


Form 4:03:2013:08:28:41 Page 98 of 106

Safety Gear: Ear Plugs and Glasses

Un-Corded ear plugs Protects up to 110db (200 Pairs per carton)

Gavan Code: SGEPLUG2 (Brand may vary from store to store)

Safety glasses We can currently supply in three colours clear, smoke and amber.

Available in many styles upon request.

Clear Gavan Code: SGGLASS01

Smoke Gavan Code: SGGLASS02

Amber Gavan Code: SGGLASS03


PART No: SG-GLVRIGMED MEDIUM - Cowhide leather riggers glovesPART No: SG-GLVRIGLGE LARGE - Cowhide leather riggers gloves PART No: SG-GLVRIGXLGE X-LARGE - Cowhide leather riggers gloves


CONTAINER CONSUMABLES

ABRASIVES: CUTTING/GRINDING

ABRASIVES: SANDING

SILICO

NE SEA

LAN

TSU

LTRA

CLEA

RU

LTRA

GR

IP (NO

NA

ILS)W

ater-basedC

ON

STRU

CTIO

N A

DH

ESIVEsealant

High S

trength Mastic A

dhesiveSafe on Polycarbonate

For bonding timber, m

etal cementitious

and plaster sheets to timber and m

etal studs.M

ultipurposeFor bonding plyw

ood and particle board sheets tofloor joists. C

onstruction Adhesive is a versatile

Water-based, easy w

ash-upm

astic adhesive that has a degree of flexibility,G

uns white dries clear

is water proof and paintable.

Adheres to polycarbonate,

fibreglass, glass,cement sheet

wood, m

etal, brick, masonry.

290g Tube

GA

P FILLERC

OO

LRO

OM

MA

STIC

Gap Filler is a high quality acrylic sealant

Aftek P

anel Mastic is a non skinning m

asticfor sealing cracks and joints in tim

ber anddesigned for sealing joints in insulating panels

plaster around doors.and elem

ents of cold store construction.E

xcellent FlexibilityIt is perm

anently flexible and non skinning toE

xcellent Paintability

accomm

odate thermal expansion and contraction.

Easy W

ater Clean-up

It is suitable for sealing between m

etals, masonry,

Excellent A

dhesion Topolystyrene and m

ost comm

on building materials,

Most B

uilding Substrates

providing a dust proof, waterproof seal.

Available in w

hite

290g Tube

GEN

EXPO

LYUR

ETHA

NE B

ASED

PRO

DU

CTS

GEN

ERA

L PUR

POSE SILIC

ON

E

Is a one part Neutral cure S

ilicone Sealant.

Seal-Flex is a high quality single com

ponent polyurethane sealant.For sealing and w

eather proofing all buildingFor use in autom

otive, marine and aerospace applications w

hereG

lazing, roofing, rainwater and cladding joints.

a tough flexible rubber sealant/adhesive is required.It is recom

mended for use w

ith Zincalume®

.Polyurethane B

ased SealantG

alvabond®, C

olorbond® and M

arviplate®.

Permanently Elastic A

fter Cure

Adheres to glass, A

luminium

, ceramics,

Can B

e Sanded

Masonry, concrete, stone, m

ostmetals and

Adheres To A

Wide R

ange m

ost painted and plastic surfaces.of Substrates and is Paintable

Available in Translucent &

Light Grey.

Available in B

lack or White

300g TubeSEA

L-FLEX 310ML C

AR

T

ALL P

RIC

ES

AR

E G

ST E

XC

LUS

IVE

. A 10%

GS

T AP

PLIE

SPA

GE 88

Form 4:03:2013:08:28:41 Page 37 of 106

Abrasives: Cutting/Grinding

ABRASIVES: CUTTING/GRINDING Abrasives 102mm x 2.5mm Cutting Gavan Code: AB102X2.5

Abrasives 102mm X 6mm Grinding Gavan Code: AB102X6

Abrasives Cutting Disc 115x1 Gavan Code: AB115X1

Abrasives 115mm X 2.5mm Cutting 4.5'' Gavan Code: AB115X2.5

Abrasives 115mm X 6mm Grinding. 4.5'' Gavan Code: AB115X6

Abrasive Cutting Disc (SS) 125x1x22 Gavan Code: AB125X1

Abrasives 125mm X 2.5mm Cutting Gavan Code: AB125X2.5

Abrasives 125mm X 6.8mm Grinding Gavan Code: AB125X6.8

Abrasives 230mmx2.5mmx22mm Cutting Gavan Code: AB230X2.5

Abrasives 230mm X 6.8mm Grinding Gavan Code: AB230X6.8

Abrasives 356mmX3mmx25.4 (drop saw) Gavan Code: AB356X3 ABRASIVES: OTHER

Twist knot Cup brush 75xM10 Gavan Code: ABCUPBRUSH7510

Cup Brush Twist Knot Type 75x14x2.0 Gavan Code: ABCUPBRUSH7514 For all other sizes or styles please contact your local branch for more information.

NEUTRAL SILICONE

CUTTING/GRINDING

SANDING DISCS

OTHER

SIKAFLEX SILICONE

Black Silicone PART No: SILICONEB Clear Silicone PART No: SILICONEC Grey Silicone PART No: SILICONEG White Silicone PART No: SILICONEW

Abrasives 102mm x 2.5mm Cutting PART No: AB102X2.5Abrasives 102mm X 6mm Grinding PART No: AB102X6Abrasives Cutting Disc 115x1 PART No: AB115X1Abrasives 115mm X 2.5mm Cutting 4.5'' PART No: AB115X2.5Abrasives 115mm X 6mm Grinding. 4.5'' PART No: AB115X6Abrasive Cutting Disc (SS) 125x1x22 PART No: AB125X1Abrasives 125mm X 2.5mm Cutting PART No: AB125X2.5Abrasives 125mm X 6.8mm Grinding PART No: AB125X6.8Abrasives 230mmx2.5mmx22mm Cutting PART No: AB230X2.5Abrasives 230mm X 6.8mm Grinding PART No: AB230X6.8Abrasives 356mmX3mmx25.4 (drop saw) PART No: AB356X3

Sanding Disc 180 x 22mm 24 Grit.(7inch) PART No: SD180P24Sanding Sheet 200 x 475mm P24 Cloth Back PART No: FS200P24CBOther sizes are available on request.

Twist knot Cup brush 75xM10 PART No: ABCUPBRUSH7510Cup Brush Twist Knot Type 75x14x2.0 PART No: ABCUPBRUSH7514

Black FC PART No: SIKA11FC-BL Black PART No: SIKA227B White PART No: SIKA227W

• Low odour • Non Corrosive• Permanently flexible • Form waterproof/weatherproof seal

Sikaflex is a polyurethane sealant/adhesive that is available in many grades in a cartridge or sausage form. This item is a general purpose sealant that is great for use on metal, rubber, wood and plastic. This product is available in many grades and strengths.

Available in 2 colours:


CONTAINER CONSUMABLES

FASTENERS: RIVETS

NUTS & BOLTS

Form 4:03:2013:08:28:41 Page 39 of 106

Drill Bits

4.9mm Drill Bit Gavan Code: DRILL4.9



7/32 Drill Bit Gavan Code: DRILL7/32

All other drill bit sizes are available upon request. Please contact your local branch for more information regarding your requirements.

Form 4:03:2013:08:28:41 Page 41 of 106

Lock Bolts

3/8 Aluminium Huck Bolt Collar Gavan Code: RV2LC-F12

3/8 Aluminium Huck Bolt Flanged Collar Gavan Code: RV3LC-F12

3/8 Aluminium Huck Lock Bolt Gavan Code: RVC6LB-C1208



Nuts & Bolts

Zinc Plated Nut & Bolt set, 10mm x 35mm Gavan Code: NUT/BOLT

DRILL BITS

BLIND RIVETS

SEALED RIVETS

NUS & BOLTS

4.9mm Drill Bit PART No: DRILL4.95.0mm Drill Bit PART No: DRILL5.05.2mm Drill Bit PART No: DRILL5.25.5mm Drill Bit PART No: DRILL5.5

3/16 Sealed End Rivet (Stainless) PART No: RVTA65SS3/16 Sealed End Rivet PART No: RVTA653/16 Sealed End Rivet PART No: RVTA683/16 Sealed End Rivet PART No: RVTA610

Zinc Plated Nut & Bolt set PART No: NUT/BOLT 10mm x 35mm

Blind Rivet Large Flange 4.8/16.7mm PART No: RVPAS68LFBlind Rivet Large Flange 4.8/23.8mm PART No: RVPAS612LF

All other drill bit sizes are available upon request. Please contact your local branch for more information regarding your requirements.

We currently stock a large range of rivets. Below is a list of the most common rivets we stock. For all other rivets please contact your local sales representative so we can source this product for you.


TWISTLOCKS

TWISTLOCK - FLATRACK

Form 4:03:2013:08:28:41

Page 68 of 106

Flatrack: Twistlock

Gavan C

ode: FR4C1026

PART No: FR4C1026 Forged Steel Body with one piece head and tail

Large operating clearances internally to overcome dirt and corrosion.

Stainless Steel Leaf Springs

Low temperature grease applied as standard

PART No: MLT1-2L

MARINE STACKING TWISTLOCK (Double stacking) SECURING CONTAINERS WHEN STACKED TWISTLOCK HOT DIPPED GALVANISED WEIGHT: 5.8KG SWL: 25 TON BL: 50 TONS

Version: 1.04 2015 AU Page 100 of 105

Lashing Equipment: Marine

Double stacking marine twistlock (Galvanised) Left hand locking

Safe working load 25,000Kg GAVAN Code: MLT1-2L

Bridge fitting for horizontal container locking Galvanised with a safe working load of 5,000Kg

GAVAN Code: MLBF-1

220

90º

132mm

110m

m90

mm

115m

m

74mm

TWISTLOCK - MARINE

PART No: MLT4-1L DOVETAIL TWISTLOCK LEFT HAND LOCKING. TWISTLOCK HOT DIPPED GALVANISED WEIGHT: 5.8KG SWL: 25 TON BL: 50 TONS

Form 7:02:2013:14:47:46 Page 97 of 102

Dovetail twistlock (Galvanised)

Left hand locking Safe working load 25,000Kg

Gavan Code: MLT4-1L

Base to suit dovetail twistlock

Cast steel with a safe working load of 25,000Kg Gavan Code: MLDF-1A

90º

175mm

(Left Hand Closed)

140m

m

170

PART No: MLDF-1A BASE TO DOVETAIL TWISTLOCK CAST STEEL SAFE WORKING LOAD OF 25,000KG

Form 7:02:2013:14:47:46 Page 97 of 102

Dovetail twistlock (Galvanised)

Left hand locking Safe working load 25,000Kg

Gavan Code: MLT4-1L

Base to suit dovetail twistlock

Cast steel with a safe working load of 25,000Kg Gavan Code: MLDF-1A

146mm

3610

45º

181mm

PART No: MLBF-1 BRIDGE FITTING FOR HORIZONTAL CONTAINER LOCKING GALVANISED SAFE WORKING LOAD OF 5000KG

Version: 1.04 2015 AU Page 100 of 105

Lashing Equipment: Marine

Double stacking marine twistlock (Galvanised) Left hand locking

Safe working load 25,000Kg GAVAN Code: MLT1-2L

Bridge fitting for horizontal container locking Galvanised with a safe working load of 5,000Kg

GAVAN Code: MLBF-1

12

10.8

21.6

M34

300 (380)


ANCRA AUSTRALIA PTY LTD A.B.N. 13 006 379 826 250 GOVERNOR ROAD, BRAESIDE VIC 3195

TERMS AND CONDITIONS OF SALE

1. Exclusion of other Terms and Conditions: The following terms and conditions shall apply to the sale of all products by ANCRA Australia Pty. Ltd. (“the Company”) to the exclusion of any and all terms and conditions in any documents submitted to the Company by the Customer whether prior to or following the Customer’s receipt of these terms and conditions.

2. Basis of Acceptance of Quotation: All quotations verbal or written are based on information provided by the Customer (or by third parties on its behalf). Any extra cost or expense arising from incorrect information shall be paid by the Customer.

ThecompanywilluseitsbestendeavourstomeetspecifieddeliverydatesbuttheCompanywillbeundernoliabilityofanykind(whether for breach of contract, negligence or otherwise) for any delay in delivery from any cause.

3 Prices: Any quotation submitted or any price set out in any price list is based upon the cost of labour and materials current at the date of thepricelistorquotation.TheCompanymayatitsdiscretionincreaseanypriceatanytimetoreflectchangesinthecostoflabourandmaterials and manufacturing overheads.

4. Terms of Payment: Unless the Company in its discretion agrees to accept payment for products on other terms, the Customer shall pay for all products delivered by the Company within 30 days from the last day of the month in which the invoice is dated.

5. Literature and Suitability of Products: Advertising and other literature provided by the Company contains general information only and no such information forms part of any contract between the Company and the Customer. The Customer shall be responsible fordeterminingthefitnessoftheCompany’sproductsforthepurposeforwhichtheyareintendedforusebytheCustomer,andacknowledges that the Company is not aware of that purpose and that the Customer has not relied on the Company’s advice.

6. Claims:Allproductssoldwillbedeemedtobeofrequiredqualityandtypeunlessaclaimspecifyingparticularsofdeficienciesorincorrect type is received by the Company within 7 days after receipt of products by the Customer.

7. Returns and Cancellations: Orders can only be cancelled or products returned with the prior written agreement of the Company. Returns due to client error will incur a restocking charge of 15% of the invoice price. Products accepted for return must be despatched at the Customer’s cost.

8. Delivery: Cost of delivery from our store to the Customer’s nominated point will be at the Customer’s cost, unless prior arrangement to the contrary. Any delivery made by us in the Melbourne areas will incur a Delivery Fee in addition to the cost of the goods.

9. Insurance: Products supplied on an F.I.S. basis will be insured by the Company up to the point of receipt at the Customer’s nominated delivery address. Products supplied other than on an F.I.S. basis will be insured by the Customer from the point of despatch by the Company.

10.Title of Goods: Full legal and equitable title in each product supplied will remain vested in the Company until the Company has received payment in full of all amounts owing by the Customer to the Company on an account whatsoever. The Customer shall have the right to sell products in which title remains vested in the Company in the ordinary course of trade. Until title in the products passes to the Customer or the products passes to the Customer or the products have been sold by the Customer in the ordinary course of trade, the CustomeracknowledgesthatitisinpossessionoftheproductsolelyasfiduciarybaileefortheCompany,andinthatcapacity,willstorethe products separately from the Customer’s own goods and those of any other person, in a manner which renders the products purely identifiableasthepropertyoftheCompany.

(a) (iftheCustomerisacorporation)theCustomercommencestobewoundup,orisplacedunderofficialmanagement,orareceiverisappointed in respect of, or any encumbrancer takes possession of, its undertaking or property or any part thereof, of the Customer is unable to pay its debts; or

(b) (if the Customer is a natural person) the Customer becomes insolvent or bankrupt, or commits an act of bankruptcy or makes an assignmentforthebenefitofacreditororcreditors;or

(c) the Customer fails to pay the whole of any part of the purchase price or transport or other charges for any products supplied by the Company when due and payable.

11. TestCertificates:TestCertificateswillonlybesuppliedifrequestedatthetimeofordering.AtestcertificateissuedbytheCompanyinrespect of a product will not constitute a warranty by the Company as to the quality, suitability or characteristics of the product or the fitnessofthatproductforanypurpose.

12. Dimensions: Lengths and weights are subject to usual commercial tolerances.13. Suspension: If, at the Customer’s request, the Company suspends work the subject of an order for more than 30 days, the Customer

shall pay the Company for the work performed prior to the suspension, and for usual materials procured of the order, within 30 days of receipt of an invoice for such work and for materials from the Company.

14.1 Liability: The Company warrants that its products will be free of defects caused by the default or neglect of the Company. If any product supplied by the Company is defective, the Company’s liability in respect of such product will be limited to, at the Company’s sole discretion:-

(a) the replacement of the product of the supply of an equivalent product;(b) the payment of the cost of replacing the product or obtaining an equivalent product;(c) the repair of the product; or(d) the payment of the cost of repair of the product. Except as provided above, the Company will not be liable in any way whatsoever (whether in contract, negligence or otherwise) for

theinjury,loss,damage,claim,actionorproceedingsufferedorincurredbyormadeorbroughtagainsttheCustomeranddirectlyorindirectly cause or contributed to by a defective product, the Company’s negligence or any breach of contract.

14.2 Except as provided in this clause no warranty is given in respect of any product and the Customer acknowledges that no warranty has been given by on or behalf of the Company. All statutory warranties negatived to the maximum extent permitted by law.

15. Law: The law of Victoria shall apply to all contracts for the supply of products by the Company to the Customer. To the extent that any applicablelawofanyStateoroftheCommonwealthofAustraliawhichcannotbeexcludedaffectstheapplicabilityorvalidityofanyofthe foregoing conditions, the conditions shall be read and construed as being subject to such law.

16. Warranty: All ANCRA Australia Pty. Ltd products are warranted to be free from defects in material or workmanship for a period of three (3) months from date of shipment. During this period ANCRA Australia Pty. Ltd will at its option repair or replace without charge any products or part thereof found to be defective in material or workmanship. This warranty does not extend to any product which has been subject to misuse, abuse, negligence, accident, alteration or unauthorised repair. Goods supplied by us but manufactured by others will be warranted only to the extent of the manufacturer’s warranty. Defective products must be returned to ANCRA Australia Pty. Ltd 250 Governor Road, Braeside, Vic, 3195 within the above period, transportation prepaid, ANCRA Australia Pty. Ltd will bear the cost of return transportation.

THIS WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES EXPRESS OR IMPLIED INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR PURPOSE. IN NO EVENT WILL ANCRA AUSTRALIA PTY. LTD. BE LIABLE FOR SPECIAL OR CONSEQUENTIAL DAMAGES OR LOSS OF VEHICLE, CARGO OR PROFITS.

ANCRA TERMS & CONDITIONS

VICTORIA (HEAD OFFICE)Freecall: 1800 4 26272 P: +61 3 9587 6700 F: +61 3 9587 1977 A: 250 Governor Road, Braeside VIC 3195

E: [email protected] W: www.ancraaustralia.com twitter.com/@ancraaustralia facebook.com/ancraaustralia

Flooring & Accessories I Door Parts Container Panels I Container Accessories & more

1 / 2 0 1 8

v1/cp2018 par… · container door tie back loctite gasket glue (406) gavan code: gluelq form...

Documents