Va

cto

r 2

10

0 S

eri

es

Ce

nt

rif

ug

al

Co

mp

re

ss

or

Se

we

r C

lea

ne

r

Specifications subject to change without notice. Vactor® and Jet Rodder® are registered trademarks of Vactor Manufacturing.Effective 10/04 P/N 00003D ©2004 Federal Signal CorporationFederal Signal Corporation is listed on the NYSE by the symbol FSS.

O p t i o n s

• Over 100 precision-engineered safety and productivity enhancements

• Multi-flow Jet Rodder® system

• Cold weather recirculation system

• Liquid debris pump-off system

• Debris flush-out system

• Fail-safe hydraulic door locking system

• Water tank capacity up to 2,000 gallons (7,570 L)

• Pump delivery systems up to 200 gpm

• Hose reel capacity up to 1,000 ft (305 m)

• Accumulator

• Dual-stage centrifugal compressor

• Shark hose

• Dual boom controls

• Aero-style low profile reel

V a l u e - A d d e d S e r v i c e s

Vactor’s commitment to the customer continues long after the sale.

• On-time delivery

• Factory-trained worldwide dealer network for assistance with service and maintenance

• Off-site regional training sessions and specific end-users training

• Genuine Performance Matched Parts™

• Training center with hands-on instruction for operator and service personnel

• Customized leasing and financial services

W a r r a n t y

The Vactor 2100 series is warranted againstdefects in material or workmanship for a period of 12 months from the date of delivery to the original purchaser; 5 years onthe centrifugal compressor, and 10 years onthe water tanks. Optional extended warrantypackages are available. Consult your Vactordealer for complete warranty information.

Y o u r V a c t o r D e a l e r i s :

Vactor Manufacturing, Inc.1621 South Illinois StreetStreator, Illinois, U.S.A. 61364(815) 672-3171 Phone (815) 672-2779 Faxwww.vactor.com

D i m e n s i o n S p e c i f i c a t i o n s

Note: Dimensions are dependent on chassis selection, optional equipment and water capacity.

Vactor 2115 Centrifugal Compressor

• Tandem rear axle

• WB 243 in (6,172 mm)

• CA 174 in (4,419 mm)

• AF 90 in (2,286 mm)

• 20,000 lb (9,091 kg) front axle• 40,000 lb (18,182 kg) total rear axles

Vactor 2110 Centrifugal Compressor

• Single rear axle

• WB 225 in (5,715 mm)

• CA 156 in (3,962 mm)

• AF 75 in (1,905 mm)

• 18,000 lb (8,182 kg) front axle• 23,000 lb (10,433 kg) rear axle

High-Dump• Dumps debris into roll-offs five-feet high without

needing a lift or ramp

• Tilts up to a 50-degree dump angle

• Provides 66 inches of clearance

• Full rear splash shield

Enhance Productivity WithVactor’s Advanced Options

Wireless Remote Control System• Highly reliable, 900 MHz,

license–free wireless control with advanced signal processing for fast control response

• Operators can get the job donequicker, having no heavy cords todrag, tangle or get caught in debris,increasing your productivity

• Improved job control – operatorshave an enhanced view of the job

• Hazardous situations can beresponded to immediately with an emergency shutdown feature

2100 Series machines offer Vactor’s proprietary system of integrated components, specifically designed for sewercleaning applications. These components work together to deliver maximum cleaning power and efficiencywhere it counts, at the nozzle.

T h e Wo r l d ’s M o s t Po w e r f u l C l e a n i n g S y s t e m

5

4

3

2

1High-Power Centrifugal Compressor Vacuum

• High-efficiency single or optional dual-stage design creates maximumvacuum and debris pickup with minimal maintenance

• Works effectively at greater depths than ordinary compressors

• Chrome-hardened impeller and spun-steel housing for longer life

Exclusive Jet Rodder® Water Pump

• Jack Hammer® action drives the nozzle through obstructions andscours pipes clean

• Single-piston, slow-stroke design and hydraulic drive for longer lifeand less maintenance

• Located 100% below the water supply for greater power and no cavitation

Telescoping, Rotating Hose Reel & Hydraulic Boom

• Boom and reel work together to create outstanding maneuverabilityand productivity

• Allows cleaning of multiple inlets without relocating truck

• Complete controls located at reel for safety and efficiency

• Optional auto-wind helps operator concentrate on his work, instead of the hose reel

Shark High-Performance Hose™ (Option)

• Molecularly bonded, reinforced rubber construction offers unbelievable flexibility and maneuverability

• Allows tighter bends, longer runs, higher pressures

• Remains flexible in temperature extremes

• The longest-lasting hose available; lasts up to 5 times longer than plastic hose

High-Performance Nozzle (Option)

• Converts waterflow and pressure into thrust 22% more efficiently than ordinary nozzles

• Dramatically increases productivity; reduces number of man hours,water and fuel consumption

• Teamed with a Shark hose, creates the most effective, high-performance cleaning system in the industry

Fleet Utilization (option)FleetMinderTM incorporates fully automated GPS and mapping capabilities to monitor and record system components and their functions. It providesaccurate records of machine activity and improvesfleet cost management and vehicle productivity.

NS39639P1:NS39639P1 6/2/08 9:49 AM Page 1

Va

cto

r 2

10

0 S

eri

es

Ce

nt

rif

ug

al

Co

mp

re

ss

or

Se

we

r C

lea

ne

r

Specifications subject to change without notice. Vactor® and Jet Rodder® are registered trademarks of Vactor Manufacturing.Effective 10/04 P/N 00003D ©2004 Federal Signal CorporationFederal Signal Corporation is listed on the NYSE by the symbol FSS.

O p t i o n s

• Over 100 precision-engineered safety and productivity enhancements

• Multi-flow Jet Rodder® system

• Cold weather recirculation system

• Liquid debris pump-off system

• Debris flush-out system

• Fail-safe hydraulic door locking system

• Water tank capacity up to 2,000 gallons (7,570 L)

• Pump delivery systems up to 200 gpm

• Hose reel capacity up to 1,000 ft (305 m)

• Accumulator

• Dual-stage centrifugal compressor

• Shark hose

• Dual boom controls

• Aero-style low profile reel

V a l u e - A d d e d S e r v i c e s

Vactor’s commitment to the customer continues long after the sale.

• On-time delivery

• Factory-trained worldwide dealer network for assistance with service and maintenance

• Off-site regional training sessions and specific end-users training

• Genuine Performance Matched Parts™

• Training center with hands-on instruction for operator and service personnel

• Customized leasing and financial services

W a r r a n t y

The Vactor 2100 series is warranted againstdefects in material or workmanship for a period of 12 months from the date of delivery to the original purchaser; 5 years onthe centrifugal compressor, and 10 years onthe water tanks. Optional extended warrantypackages are available. Consult your Vactordealer for complete warranty information.

Y o u r V a c t o r D e a l e r i s :

Vactor Manufacturing, Inc.1621 South Illinois StreetStreator, Illinois, U.S.A. 61364(815) 672-3171 Phone (815) 672-2779 Faxwww.vactor.com

D i m e n s i o n S p e c i f i c a t i o n s

Note: Dimensions are dependent on chassis selection, optional equipment and water capacity.

Vactor 2115 Centrifugal Compressor

• Tandem rear axle

• WB 243 in (6,172 mm)

• CA 174 in (4,419 mm)

• AF 90 in (2,286 mm)

• 20,000 lb (9,091 kg) front axle• 40,000 lb (18,182 kg) total rear axles

Vactor 2110 Centrifugal Compressor

• Single rear axle

• WB 225 in (5,715 mm)

• CA 156 in (3,962 mm)

• AF 75 in (1,905 mm)

• 18,000 lb (8,182 kg) front axle• 23,000 lb (10,433 kg) rear axle

High-Dump• Dumps debris into roll-offs five-feet high without

needing a lift or ramp

• Tilts up to a 50-degree dump angle

• Provides 66 inches of clearance

• Full rear splash shield

Enhance Productivity WithVactor’s Advanced Options

Wireless Remote Control System• Highly reliable, 900 MHz,

license–free wireless control with advanced signal processing for fast control response

• Operators can get the job donequicker, having no heavy cords todrag, tangle or get caught in debris,increasing your productivity

• Improved job control – operatorshave an enhanced view of the job

• Hazardous situations can beresponded to immediately with an emergency shutdown feature

2100 Series machines offer Vactor’s proprietary system of integrated components, specifically designed for sewercleaning applications. These components work together to deliver maximum cleaning power and efficiencywhere it counts, at the nozzle.

T h e Wo r l d ’s M o s t Po w e r f u l C l e a n i n g S y s t e m

5

4

3

2

1High-Power Centrifugal Compressor Vacuum

• High-efficiency single or optional dual-stage design creates maximumvacuum and debris pickup with minimal maintenance

• Works effectively at greater depths than ordinary compressors

• Chrome-hardened impeller and spun-steel housing for longer life

Exclusive Jet Rodder® Water Pump

• Jack Hammer® action drives the nozzle through obstructions andscours pipes clean

• Single-piston, slow-stroke design and hydraulic drive for longer lifeand less maintenance

• Located 100% below the water supply for greater power and no cavitation

Telescoping, Rotating Hose Reel & Hydraulic Boom

• Boom and reel work together to create outstanding maneuverabilityand productivity

• Allows cleaning of multiple inlets without relocating truck

• Complete controls located at reel for safety and efficiency

• Optional auto-wind helps operator concentrate on his work, instead of the hose reel

Shark High-Performance Hose™ (Option)

• Molecularly bonded, reinforced rubber construction offers unbelievable flexibility and maneuverability

• Allows tighter bends, longer runs, higher pressures

• Remains flexible in temperature extremes

• The longest-lasting hose available; lasts up to 5 times longer than plastic hose

High-Performance Nozzle (Option)

• Converts waterflow and pressure into thrust 22% more efficiently than ordinary nozzles

• Dramatically increases productivity; reduces number of man hours,water and fuel consumption

• Teamed with a Shark hose, creates the most effective, high-performance cleaning system in the industry

Fleet Utilization (option)FleetMinderTM incorporates fully automated GPS and mapping capabilities to monitor and record system components and their functions. It providesaccurate records of machine activity and improvesfleet cost management and vehicle productivity.

NS39639P1:NS39639P1 6/2/08 9:49 AM Page 1

O u t s t a n d i n g M a n e u v e r a b i l i t y

Telescoping, Rotating Hose ReelEasy-to-position design reduces the chance of hose damage due to misalignment. Permits cleaning multiple inlets withoutmoving the truck chassis. Rotates a full 270˚and telescopes out 15 in (381 mm) from thetruck. Dual controls allow operator to worksafely from either side.

Telescoping BoomProvides 23 ft (7 m) of reach for optimum versatility and productivity. Extends and retracts; moves up, down, right and left, from a walk-around pendant control or the workstation control panel. Trouble-free hydraulic operation eliminates adjustment and maintenance problems common to belt and chain systems.

The synergy of the unique Vactor telescoping, rotat-ing hose reel and telescoping boom creates the most efficient work system in the industry.

Photo illustrations on this page include optional components.

Efficient Centrifugal Compressor VacuumThe Vactor vacuum system works atgreater depths and significantly increasesdebris volume and velocity. Large 38 in(965 mm) dia. aluminum fan is light-weight and perfectly balanced for smoother,safer, superior airflow. Chrome-hardenedimpeller and 1/4 in (6.35 mm) spun steelhousing provide longer life. Optional dualstage design available.

Direct Drive System Unique Vactor design delivers superior vacuum performance. Step-up transmissionwith helical gears dramatically speeds upfan. Fluid coupler provides soft starts andstops, reduces wear on drive componentsand eliminates high-maintenance beltsand sheaves. Optional clutch available.

Aluminum Water TanksCorrosion-, rust- and crack-resistantdesign backed by 10-year warranty.Baffled cylindrical shape adds highstrength and durability.

Quiet, Powerful Auxiliary EngineEnvironmentally friendly 4 cyl auxiliaryengine works effortlessly with minimalfuel consumption and low emissions. For operator comfort and safety, theengine is totally encapsulated in a noisesuppressant shroud to meet or exceed all dBa requirements. Optional 6 cylengine available.

Independent Power Source for WaterThe truck chassis engine drives thehydraulic water pump, providing reliable independent power that allowspump on/off engagement at any time.Delivers full flow and pressure to thehose reel, where it counts.

Easy Load, Fast Dump Debris BodySafe and efficient design shields the operator from potential contamination.Made of 3/16 in (4.76 mm) Ex-Ten® corrosion-and abrasion-resistant steel, the full 50°dump angle is achieved with a single, double-acting hydraulic cylinder. Capacities availablefrom 5 to 16 yd3 (4 to 12 m3).

1

1

4

4

5

5

6

6

7

7

8

8

8

9

9

3

3

2

2

Jet Rodder® Water PumpExclusively designed for sewer clean-ing applications, the Jack Hammer®

action pounds through blockages andvirtually scours pipes clean. The slowstroke action delivers maximum continuous flow and pressure withminimal wear. Superior beltlesshydraulic drive with instant on/off at operator’s station. 5-year warrantyavailable.

Fully Hydraulic BoomProvides effortless in/out and up, down,left and right movement with full 180°rotation for easy positioning into hard-to-reach areas. Trouble-free hydraulicpower eliminates adjustment and main-tenance problems common to sprocketand chain systems.

Front-Mounted Hose ReelFront mount provides the operator with a safe, efficient workstation. Optional compact design improves driver visibility.Heavy-duty high capacity reel withhydraulically powered forward and reverse.Optional telescopic action adds 15 in(381 mm) of reach and 270˚ rotation.

Complete Operator ControlEvery control necessary for operation(boom, aux. engine, start/stop, rpm,hose reel functions and chassis throttle)is located right at the hose reel, for maximum safety and productivity. Dual controls (both sides of reel) are standard.

V a c t o r ® 2 1 0 0 S e r i e s C e n t r i f u g a l C o m p r e s s o r S e w e r C l e a n e rA Super ior Machine Des igned for Cleaning Ent i re Wastewater and Sanitary Systems

NS39639P1:NS39639P1 6/2/08 9:50 AM Page 2

O u t s t a n d i n g M a n e u v e r a b i l i t y

Telescoping, Rotating Hose ReelEasy-to-position design reduces the chance of hose damage due to misalignment. Permits cleaning multiple inlets withoutmoving the truck chassis. Rotates a full 270˚and telescopes out 15 in (381 mm) from thetruck. Dual controls allow operator to worksafely from either side.

Telescoping BoomProvides 23 ft (7 m) of reach for optimum versatility and productivity. Extends and retracts; moves up, down, right and left, from a walk-around pendant control or the workstation control panel. Trouble-free hydraulic operation eliminates adjustment and maintenance problems common to belt and chain systems.

The synergy of the unique Vactor telescoping, rotat-ing hose reel and telescoping boom creates the most efficient work system in the industry.

Photo illustrations on this page include optional components.

Efficient Centrifugal Compressor VacuumThe Vactor vacuum system works atgreater depths and significantly increasesdebris volume and velocity. Large 38 in(965 mm) dia. aluminum fan is light-weight and perfectly balanced for smoother,safer, superior airflow. Chrome-hardenedimpeller and 1/4 in (6.35 mm) spun steelhousing provide longer life. Optional dualstage design available.

Direct Drive System Unique Vactor design delivers superior vacuum performance. Step-up transmissionwith helical gears dramatically speeds upfan. Fluid coupler provides soft starts andstops, reduces wear on drive componentsand eliminates high-maintenance beltsand sheaves. Optional clutch available.

Aluminum Water TanksCorrosion-, rust- and crack-resistantdesign backed by 10-year warranty.Baffled cylindrical shape adds highstrength and durability.

Quiet, Powerful Auxiliary EngineEnvironmentally friendly 4 cyl auxiliaryengine works effortlessly with minimalfuel consumption and low emissions. For operator comfort and safety, theengine is totally encapsulated in a noisesuppressant shroud to meet or exceed all dBa requirements. Optional 6 cylengine available.

Independent Power Source for WaterThe truck chassis engine drives thehydraulic water pump, providing reliable independent power that allowspump on/off engagement at any time.Delivers full flow and pressure to thehose reel, where it counts.

Easy Load, Fast Dump Debris BodySafe and efficient design shields the operator from potential contamination.Made of 3/16 in (4.76 mm) Ex-Ten® corrosion-and abrasion-resistant steel, the full 50°dump angle is achieved with a single, double-acting hydraulic cylinder. Capacities availablefrom 5 to 16 yd3 (4 to 12 m3).

1

1

4

4

5

5

6

6

7

7

8

8

8

9

9

3

3

2

2

Jet Rodder® Water PumpExclusively designed for sewer clean-ing applications, the Jack Hammer®

action pounds through blockages andvirtually scours pipes clean. The slowstroke action delivers maximum continuous flow and pressure withminimal wear. Superior beltlesshydraulic drive with instant on/off at operator’s station. 5-year warrantyavailable.

Fully Hydraulic BoomProvides effortless in/out and up, down,left and right movement with full 180°rotation for easy positioning into hard-to-reach areas. Trouble-free hydraulicpower eliminates adjustment and main-tenance problems common to sprocketand chain systems.

Front-Mounted Hose ReelFront mount provides the operator with a safe, efficient workstation. Optional compact design improves driver visibility.Heavy-duty high capacity reel withhydraulically powered forward and reverse.Optional telescopic action adds 15 in(381 mm) of reach and 270˚ rotation.

Complete Operator ControlEvery control necessary for operation(boom, aux. engine, start/stop, rpm,hose reel functions and chassis throttle)is located right at the hose reel, for maximum safety and productivity. Dual controls (both sides of reel) are standard.

V a c t o r ® 2 1 0 0 S e r i e s C e n t r i f u g a l C o m p r e s s o r S e w e r C l e a n e rA Super ior Machine Des igned for Cleaning Ent i re Wastewater and Sanitary Systems

NS39639P1:NS39639P1 6/2/08 9:50 AM Page 2

O u t s t a n d i n g M a n e u v e r a b i l i t y

Telescoping, Rotating Hose ReelEasy-to-position design reduces the chance of hose damage due to misalignment. Permits cleaning multiple inlets withoutmoving the truck chassis. Rotates a full 270˚and telescopes out 15 in (381 mm) from thetruck. Dual controls allow operator to worksafely from either side.

Telescoping BoomProvides 23 ft (7 m) of reach for optimum versatility and productivity. Extends and retracts; moves up, down, right and left, from a walk-around pendant control or the workstation control panel. Trouble-free hydraulic operation eliminates adjustment and maintenance problems common to belt and chain systems.

The synergy of the unique Vactor telescoping, rotat-ing hose reel and telescoping boom creates the most efficient work system in the industry.

Photo illustrations on this page include optional components.

Efficient Centrifugal Compressor VacuumThe Vactor vacuum system works atgreater depths and significantly increasesdebris volume and velocity. Large 38 in(965 mm) dia. aluminum fan is light-weight and perfectly balanced for smoother,safer, superior airflow. Chrome-hardenedimpeller and 1/4 in (6.35 mm) spun steelhousing provide longer life. Optional dualstage design available.

Direct Drive System Unique Vactor design delivers superior vacuum performance. Step-up transmissionwith helical gears dramatically speeds upfan. Fluid coupler provides soft starts andstops, reduces wear on drive componentsand eliminates high-maintenance beltsand sheaves. Optional clutch available.

Aluminum Water TanksCorrosion-, rust- and crack-resistantdesign backed by 10-year warranty.Baffled cylindrical shape adds highstrength and durability.

Quiet, Powerful Auxiliary EngineEnvironmentally friendly 4 cyl auxiliaryengine works effortlessly with minimalfuel consumption and low emissions. For operator comfort and safety, theengine is totally encapsulated in a noisesuppressant shroud to meet or exceed all dBa requirements. Optional 6 cylengine available.

Independent Power Source for WaterThe truck chassis engine drives thehydraulic water pump, providing reliable independent power that allowspump on/off engagement at any time.Delivers full flow and pressure to thehose reel, where it counts.

Easy Load, Fast Dump Debris BodySafe and efficient design shields the operator from potential contamination.Made of 3/16 in (4.76 mm) Ex-Ten® corrosion-and abrasion-resistant steel, the full 50°dump angle is achieved with a single, double-acting hydraulic cylinder. Capacities availablefrom 5 to 16 yd3 (4 to 12 m3).

1

1

4

4

5

5

6

6

7

7

8

8

8

9

9

3

3

2

2

Jet Rodder® Water PumpExclusively designed for sewer clean-ing applications, the Jack Hammer®

action pounds through blockages andvirtually scours pipes clean. The slowstroke action delivers maximum continuous flow and pressure withminimal wear. Superior beltlesshydraulic drive with instant on/off at operator’s station. 5-year warrantyavailable.

Fully Hydraulic BoomProvides effortless in/out and up, down,left and right movement with full 180°rotation for easy positioning into hard-to-reach areas. Trouble-free hydraulicpower eliminates adjustment and main-tenance problems common to sprocketand chain systems.

Front-Mounted Hose ReelFront mount provides the operator with a safe, efficient workstation. Optional compact design improves driver visibility.Heavy-duty high capacity reel withhydraulically powered forward and reverse.Optional telescopic action adds 15 in(381 mm) of reach and 270˚ rotation.

Complete Operator ControlEvery control necessary for operation(boom, aux. engine, start/stop, rpm,hose reel functions and chassis throttle)is located right at the hose reel, for maximum safety and productivity. Dual controls (both sides of reel) are standard.

V a c t o r ® 2 1 0 0 S e r i e s C e n t r i f u g a l C o m p r e s s o r S e w e r C l e a n e rA Super ior Machine Des igned for Cleaning Ent i re Wastewater and Sanitary Systems

NS39639P1:NS39639P1 6/2/08 9:50 AM Page 2

Va

cto

r 2

10

0 S

eri

es

Ce

nt

rif

ug

al

Co

mp

re

ss

or

Se

we

r C

lea

ne

r

Specifications subject to change without notice. Vactor® and Jet Rodder® are registered trademarks of Vactor Manufacturing.Effective 10/04 P/N 00003D ©2004 Federal Signal CorporationFederal Signal Corporation is listed on the NYSE by the symbol FSS.

O p t i o n s

• Over 100 precision-engineered safety and productivity enhancements

• Multi-flow Jet Rodder® system

• Cold weather recirculation system

• Liquid debris pump-off system

• Debris flush-out system

• Fail-safe hydraulic door locking system

• Water tank capacity up to 2,000 gallons (7,570 L)

• Pump delivery systems up to 200 gpm

• Hose reel capacity up to 1,000 ft (305 m)

• Accumulator

• Dual-stage centrifugal compressor

• Shark hose

• Dual boom controls

• Aero-style low profile reel

V a l u e - A d d e d S e r v i c e s

Vactor’s commitment to the customer continues long after the sale.

• On-time delivery

• Factory-trained worldwide dealer network for assistance with service and maintenance

• Off-site regional training sessions and specific end-users training

• Genuine Performance Matched Parts™

• Training center with hands-on instruction for operator and service personnel

• Customized leasing and financial services

W a r r a n t y

The Vactor 2100 series is warranted againstdefects in material or workmanship for a period of 12 months from the date of delivery to the original purchaser; 5 years onthe centrifugal compressor, and 10 years onthe water tanks. Optional extended warrantypackages are available. Consult your Vactordealer for complete warranty information.

Y o u r V a c t o r D e a l e r i s :

Vactor Manufacturing, Inc.1621 South Illinois StreetStreator, Illinois, U.S.A. 61364(815) 672-3171 Phone (815) 672-2779 Faxwww.vactor.com

D i m e n s i o n S p e c i f i c a t i o n s

Note: Dimensions are dependent on chassis selection, optional equipment and water capacity.

Vactor 2115 Centrifugal Compressor

• Tandem rear axle

• WB 243 in (6,172 mm)

• CA 174 in (4,419 mm)

• AF 90 in (2,286 mm)

• 20,000 lb (9,091 kg) front axle• 40,000 lb (18,182 kg) total rear axles

Vactor 2110 Centrifugal Compressor

• Single rear axle

• WB 225 in (5,715 mm)

• CA 156 in (3,962 mm)

• AF 75 in (1,905 mm)

• 18,000 lb (8,182 kg) front axle• 23,000 lb (10,433 kg) rear axle

High-Dump• Dumps debris into roll-offs five-feet high without

needing a lift or ramp

• Tilts up to a 50-degree dump angle

• Provides 66 inches of clearance

• Full rear splash shield

Enhance Productivity WithVactor’s Advanced Options

Wireless Remote Control System• Highly reliable, 900 MHz,

license–free wireless control with advanced signal processing for fast control response

• Operators can get the job donequicker, having no heavy cords todrag, tangle or get caught in debris,increasing your productivity

• Improved job control – operatorshave an enhanced view of the job

• Hazardous situations can beresponded to immediately with an emergency shutdown feature

2100 Series machines offer Vactor’s proprietary system of integrated components, specifically designed for sewercleaning applications. These components work together to deliver maximum cleaning power and efficiencywhere it counts, at the nozzle.

T h e Wo r l d ’s M o s t Po w e r f u l C l e a n i n g S y s t e m

5

4

3

2

1High-Power Centrifugal Compressor Vacuum

• High-efficiency single or optional dual-stage design creates maximumvacuum and debris pickup with minimal maintenance

• Works effectively at greater depths than ordinary compressors

• Chrome-hardened impeller and spun-steel housing for longer life

Exclusive Jet Rodder® Water Pump

• Jack Hammer® action drives the nozzle through obstructions andscours pipes clean

• Single-piston, slow-stroke design and hydraulic drive for longer lifeand less maintenance

• Located 100% below the water supply for greater power and no cavitation

Telescoping, Rotating Hose Reel & Hydraulic Boom

• Boom and reel work together to create outstanding maneuverabilityand productivity

• Allows cleaning of multiple inlets without relocating truck

• Complete controls located at reel for safety and efficiency

• Optional auto-wind helps operator concentrate on his work, instead of the hose reel

Shark High-Performance Hose™ (Option)

• Molecularly bonded, reinforced rubber construction offers unbelievable flexibility and maneuverability

• Allows tighter bends, longer runs, higher pressures

• Remains flexible in temperature extremes

• The longest-lasting hose available; lasts up to 5 times longer than plastic hose

High-Performance Nozzle (Option)

• Converts waterflow and pressure into thrust 22% more efficiently than ordinary nozzles

• Dramatically increases productivity; reduces number of man hours,water and fuel consumption

• Teamed with a Shark hose, creates the most effective, high-performance cleaning system in the industry

Fleet Utilization (option)FleetMinderTM incorporates fully automated GPS and mapping capabilities to monitor and record system components and their functions. It providesaccurate records of machine activity and improvesfleet cost management and vehicle productivity.

NS39639P1:NS39639P1 6/2/08 9:49 AM Page 1