valla 1725-22 sd mobile crane - pick and carry...

S.p.A.Via Piacenza, 45 - 29010 Calendasco - Piacenza - ITALIATel. 0039 0523 762025 - 762004 - Fax 0039 0523 760531Internet: www.valla.com - email: [email protected]

Printed by VALLA S.p.a. June 2003

BOOM: fabricated frompreformed and welded steel platewith 3 hydraulic telescopingsections on nylon wear pads,360° slewing unlimited andcontinuously. Incorporatedmanual extension.

WINCH: hydraulically operated.

CAB: full vision enclosed cab,designed as an independent unit.Mounted through vibrationabsorbers to the frame includingall driving and crane controlswithin easy reach of the operator.

HYDRAULIC SYSTEM: gearpump, electric proportionaldistributor controlled by singlejoystick, filter, safety valves on allboom operations.

TOTAL MACHINE WEIGHT:nearly kg 10.000.

OPTIONAL EXTRAS: man bucket,remote control, L.M.I. (electronicLoad Moment Indicator), jib.

ENGINE: diesel 51 HP, watercooled engine.

TRANSMISSION: automatic torqueconverter; differential axle.

WHEELS: 3.00 – 15” pneumatictyres.

STEERING: power steeringhydraulically operated.

SUSPENSION: oscillating rearaxle.

BRAKES: foot operated hydraulicshoe brakes to front and rearwheels. Hand brake cable operatedto front wheels.

CRANE FRAME: fabricated frompreformed and welded steel platewith built-in counterweight.Standard carry deck.

OUTRIGGERS: four hydraulicallyindependent oblique. Fitted withsafety valves.

Data above are subject to be changed without any previous notice.

MAX CAPACITY 10 t VALLA 1725-22 SD MOBILE CRANE

VALLA MODEL 1725-22/SD


The crane complies with followinginternational standards:- I.S.P.E.S.L.- DIN 15018 (1,3) - 15019 (1) class H 2 B3- ANSI - 1994- 98/37/CE- 89/336/ CE and successive modification

2 WS

4 WS (OPTIONAL)


VALLA 1725-22 SD MOBILE CRANE

VALLA MODEL 1725-22/SD

12°



Pick and carry capacityto 3 km/h with boomover front.

&

Stationary capacity on rubberwith boom’s corner max di 12°.

4 2,15 1,5 1,16,35

77 1.81.82.32.3334.44.4

1010 5.45.4 3.53.5 2.52.5 22

1,21,62,75510

0

11

10

9

8

7

6

5

4

3

2

1

97654321 8

45°



&

Capacity on outriggers withboom’s corner max of 45°.

Capacity on outriggers withcorner max of 360°.

Jib to 0°



Jib to 45°



LIFTING CAPACITY MOD. 1725-22/SE-SDR

AD

IUS

(m

t)

ON OUTTRIGGERS ON RUBBER

360°

OVER

FRONT

(max 45°)

WITH JIB 360°

0°

retr

acte

d

45°r

etr

acte

d

0°

exte

nd

ed

45°

exte

nded

STATIONARY

CAPACITY

OVER FRONT

(max 12°)

STATIONARY

CAPACITY

360°

PICK AND CARRY

CAPACITY UP TO

3 km/h

(boom over front)

1.90

2.30

2.85

3.55

4.30

5.00

5.70

6.30

6,90

7.50

8.00

8.50

9.00

9.50

10.0

10.5

11.0

11.5

12.0

10.000

6.350

5.000

4.000

2.750

2.150

1.600

1.500

1.200

1.100

10.000

7.000

5.400

4.400

3.500

3.000

2.500

2.300

2.000

1.800

2.390

2.240

2.210

1.870

1.700

1.530

1.400

1.180

1.020

870

770

670

590

500

450

1.530

1.400

1.280

1.180

1.100

990

900

830

1.410

1.320

1.150

1.040

960

910

870

840

730

650

580

520

460

390

300

250

200

840

820

800

780

750

710

620

500

450

7.000

6.200

4.600

3.300

2.200

1.900

1.500

1.300

1.000

800

3.000

2.200

1.500

700

600

500

7.000

6.200

4.900

3.300

2.200

1.900

1.500

1.300

1.000

800

- Rated loads above do not exceed 80% of tipping loads on outriggers and 75% on rubber.

- Capacities above bold lines are based only on structural strenght of crane.

- Capacities and performances are for crane on firm, level surfaces.

- Pick and carry operation: boom has to be centered overfront, used in the shortest possible lenght, min radius, lowestangle, load close to the ground. Negotiating grades (max 10%) is only permitted WITHOUT LOAD and limited toshort distance and time.

- When needed, outriggers must be fully extended.

- When lifting area is not clearly visible by crane’s operator, the presence of a second man is mandatory for signaling.

- Never handle a load in the area above cab.

valla 1725-22 sd mobile crane - pick and carry...

Documents