valuejunction valuejunction -...
TRANSCRIPT
1 / 30
VALUEJUNCTION valuejunction.in
Online Sealed Bid auction of
E-Auction – Regular Scrap Items
From various locations of Hindustan Zinc Limited
OFA No. – VJ/HZL/15-16/20
Auction Date and Time: 23 - 24th June, 2015
Lot Nos. Time slot
Date Time Slot 1 - 30 23rd June, 2015 11:00 AM - 12:00 noon
31 - 60 23rd June, 2015 12:00 noon - 12:45 PM
61 - 90 23rd June, 2015 12:45 PM - 1:30 PM
91 - 120 23rd June, 2015 1:30 PM - 2:15 PM
121 -150 23rd June, 2015 2:15 PM - 3:00 PM
151 - 180 23rd June, 2015 3:00 PM - 3:45 PM
181 - 210 24th June, 2015 3:45 PM – 4:30 PM
211 - 240 24th June, 2015 11:00 AM - 12:00 noon
241 - 270 24th June, 2015 12:00 noon - 12:45 PM
271 - 306 24th June, 2015 12:45 PM - 1:30 PM
Inspection Date and Time: As mentioned under. Contact Details:
HZL Contact Person Ravi P. 02942 – 652150 ([email protected])
Arindam Mandal 01472- 254119
Mjunction Contact Person Ajay Saxena 9643805857 ([email protected])
Ritwik Poddar 8336925965 ([email protected])
2 / 30
E-auction
On-Line Auction/Tender Submission
Dates
23.06.2015 – 24.06.2015
Material Description, Quantity
& Last date of updated list.
Kindly see the enclosed list for detailed list of items.
Item list is tentative list. Material & quantity etc may change. Please check updated list 2 days before the respective E-Auction.
Quantity may considerably vary in the range of 20% (subject to availability of material & generation at HZL)
Inspection of Auction Property
From: 15-June-2015 to 22-June-2015
Time: 10.00 A.M to 03.30 P.M.
Documents Required
Scanned copy of Signed Declaration duly filled, signed and stamped (as attached at the end of this document) and appropriate CPCB/MoEF certificate (wherever applicable) has to reach Mjunction representatives as mentioned on the cover page over Email by 4:00 PM on 22nd June, 2015 to secure participation.
New Bidder Registration
Bidders not yet registered with with Mjunction Services Limited have to complete their registration formalities with Mjunction Services Limited positively one day prior to the auction. Kindly contact the Mjunction executives mentioned on the cover page for details about the registration formalities.
Advance Payment and Delivery
Advance payment will be accepted lot wise only.
Vehicle may be placed after prior permission from unit.
Material will be sold on "As is where is & no complaint basis" cutting and
sorting will not be allowed. No issue will be entertained at the time of delivery of material.
Any issue related to material may be brought out in notice, in writing at the time of inspection of item.
C Form and Tax and Duties
Customers for which CST is applicable will have to submit "C" Form at the time of lifting of material, otherwise full sales tax will be charged.
Tax and Duties are extra as applicable at the time of delivery.
Seller
‘Seller’ means HINDUSTAN ZINC LTD., Udaipur – 313 004., Rajasthan
Caution Money Deposit (CMD)
For All Lots: For participating in this Tender cum E-auction, the intending bidders shall deposit Caution Money Deposit (CMD) as below via NEFT payment may be made in following bank A/c in favor of ‘Mjunction
Services Limited’
5 lacs All lots
2 lacs All lots except priority lots
3 / 30
individual CMD’s for individual lots and the same would be considered as EMD *For any particular lot, specific CMD’s to be deposited as listed above and in case of successful bidding same could be considered as EMD.
Bank HDFC Bank Ltd.
Branch 2/6 Sarat Bose Road, Kolkatta-20.
Bank Account No 00140310003480
IFSC Code HDFC0000014
Last date for submission of CMD
4:00 PM on 22nd of June, 2015 for any lot concerned
Additional Lots / Revised Quantity
Tentative date of updated list on website is 2 days before date of respective auction. Updated Quantity will be declared before starting of e Auction. Please check for updates from respective Unit or website. Please check the lot details on auction date before participating in auction for update in terms and conditions / quantity if any.
Start Bid
To be available at the time of auction.
Bidding modalities
Price Bid Basis:
In Indian rupees as per unit of measurement as given in Material List.
Price to be quoted is basic, ex- location exclusive of taxes
Taxes & duties:
VAT / Sales Tax : As applicable
Excise Duty : As applicable
CS : As applicable
Any dispute on quality of material and bid cancellation shall not be entertained at any point after the auction. It is requested to make a physical verification of the lot before the auction.
At any point of time, retracting from a bid would not be entertained and serious consequences would be levied ranging from penalty to ban of up to 3 months according to managements direction.
Loading
Chanderiya & Dariba Smelter - Loading in HZL Scope
All other locations – Loading in customer’s scope at his own costs & risk. All tools and tackles, Labor, Forklifts, and Crane etc. will be arranged by the purchasers at their own cost. Non availability of the same will not be considered as a ground for 'Late-Lifting' of the materials.
Loading shall be given strictly as per the statutory norms & safety norms of HZL
Loading Time: 8 AM to 4 PM
*During loading – female laborers would not be allowed
Weighment
1. Each truck shall be weighed at HZL unit weighbridge. 2. The weight as determined at HZL shall be accepted as final for settlement.
Result Declaration Within 10 working days from the last date of conduct of auction
Earnest Money Deposit (EMD)
10% of basic value of the lot for lot value > 1 lac full advance + 10% extra of total basic value for lot value < 1 lac (no EMD) For generation basis lot, the EMD is same as individual CMD as mentioned in the material list & delivery period – 10 days from intimation of store
EMD Deposit will stand forfeited in the event of the purchaser not removing the lots within the specified time.
CMD/ EMD shall bear no interest.
4 / 30
PAYMENT SCHEDULE
& DELIVERY:
SALE VALUE
Payment Period
EMD Advance & Delivery
period
Up to 10 lacs
5 days
15 days
Bet 10 - 20 lacs 20 days
20 lacs & above 25 days
Payment on a full advance basis is to be made by the purchaser before lifting.
In case of any increase in quantity, HZL will intimate to party well in advance to deposit the advance payment and to lift entire lot on ground clearance basis.
Payment Up to 3 lacs – 1 installment; Between 3 to 10 lacs – 2 installments
For payment above 10 lacs - Minimum installment of 5 lacs
Any change in Excise duty, taxes and levies applicable at the time of lifting shall be applicable.
PENALTY FOR
DELAY IN BALANCE PAYMENT
Delay in Extension for Penalty
(%)
EMD 3 days 2
Advance & Delivery 7 days 2 *Penalty is applicable only on the basic value of the pending material No more extension would be allowed and Seller may at its discretion, terminate the contract and the EMD paid by the purchaser will stand forfeited for the breach of contract by the purchaser. The lot in question will be re-sold by the Seller, without any reference to the purchaser, to any other buyer at the risk of the defaulting purchaser.
List of Units with contact details:
S.no. Unit Address Contact Person Contact No. E-mail ID
1 Chanderiya Pyro
Pyro Store- Chanderia Smelter Complex, PO- Putholi, Chittorgarh- 312021 Mr. Dilip Bharania 9829545722 [email protected]
2 Chanderiya Hydro I
Hydro-I Store- Chanderia Smelter Complex, PO- Putholi, Chittorgarh- 312021 Mr. Jakey Goyal 9001904999 [email protected]
3 Chanderiya Hydro II
Hydro-II Store- Chanderia Smelter Complex, PO- Putholi, Chittorgarh- 312021 Mr. Jakey Goyal 9001904999 [email protected]
4 Chanderiya CPP
CPP Store- Chanderia Smelter Complex, PO- Putholi, Chittorgarh- 312021 Mr. PC Pareek 9928013967 [email protected]
5 Rampura Agucha Mines
Store-Commercial, Hindustan Zinc Ltd., Rampura Agucha Mines, PO- Agucha Bhilwara (Raj.)- 311029 Mr. Dinesh Prajapat 7726999947 [email protected]
5 / 30
6 RD Mines
Store-Commercial, Hindustan Zinc Ltd., PO- Dariba Mines, Rajsamand (Raj.)- 313211 Mr. Kaluram Jat 9929098163 [email protected]
7 SK Mines
Store-Commercial, Hindustan Zinc Ltd., Sindesar Khurd Mines, PO- Dariba Mines, Rajsamand (Raj.)- 313211 Mr. Chetan Dungarwal 9829013685 [email protected]
8 Zawar Mines
Store-Commercial, Hindustan Zinc Ltd., Zawar Mines, PO- Zawar, Udaipur (Raj.)- 313901 Mr. Vijendra Nagda 9413093684 [email protected]
9 Debari
Store- Commercial, Debari Zinc Smelter, Hindustan Zinc Ltd. Airport Road- Debari, Udaipur (Raj.)- 313024 Mr. Rahul Dashottar
0294 2652392 [email protected]
10 Dariba Smelter
Store-Commercial, Hindustan Zinc Ltd., Dariba Smelter Complex, PO- Dariba Mines, Rajsamand (Raj.)- 313211
Mr. Lalit Tanwar Mr. Yogesh Dadeech
9602053545 8003092190
[email protected] [email protected]
11 Zawar CPP
Store-Commercial, Hindustan Zinc Ltd., Zawar Mines, PO- Zawar, Udaipur (Raj.)- 313901
Mr. Ghanshyam Paliwal 9829567034 [email protected]
12 Dariba CPP
Store-Commercial, Hindustan Zinc Ltd., Dariba Smelter Complex, PO- Dariba Mines, Rajsamand (Raj.)- 313211 Mr. Lalit Tanwar 9602053545 [email protected]
13 Haridwar plant
Hindustan Zinc Limited Haridwar Zinc Plant Commercial Deptt. Plot No. 2D-1, Sector-10, IIE, SIDCUL, Haridwar-249403, Uttrakhand Mr. Mahendra Yadav [email protected]
14 Pantnagar
Central Stores- Hindustan Zinc Ltd, Plot no-02, Sector-14, IIE, SIDCUL, Pantnagar, Rudrapur-263153 (Uttrakhand) Mr. Ankesh Garg 8938806380 [email protected]
15 Vishakaptnam(VZS)
HINDUSTAN ZINC LTD, Eastern Zinc Colony VISAKHAPATNAM-
530015 Mr. Ravi Swamy 9502958222 [email protected]
16 Kayar Mines Kayar Mines Chanderjeet Sharma 9928369818 [email protected]
6 / 30
List of HZL Bankers – Unit Wise
S.No. Unit Bank Branch Bank Account No. IFSC Code
1 Chanderiya Pyro SBBJ Putholi, Chittorgarh 51053730093 SBBJ 0010730
2 Chanderiya Hydro I IDBI Specialised Corp branch Saheli Marg, Udaipur 013103000004312 IBKL0000392
3 Chanderiya Hydro II IDBI Specialised Corp branch Saheli Marg, Udaipur 013103000004312 IBKL0000392
4 Chanderiya CPP IDBI Chittorgarh Branch 111103000000222 IBKL0000111
5 Rampura Agucha
Mines SBBJ Agucha 51076160081 SBBJ0010530
6 RD Mines IDBI CORPORATE BRANCH UDAIPUR 013103000004312 IBKL0000392
7 SK Mines IDBI Saheli Marg,Udaipur 013103000004312 IBKL0000392
8 Zawar Mines SBBJ ZAWAR MINES,UDAIPUR 51045959704 SBBJ0010227
9 Debari SBBJ Zinc Smelter, Debari 51041900038 SBBJ0010216
10 Dariba Smelter
Complex IDBI UDAIPUR (CORPORATE BANKING BRANCH) 013103000004312 IBKL0000392
11 Zawar CPP SBBJ ZAWAR MINES,UDAIPUR 51045959704 SBBJ0010227
12 Dariba CPP IDBI UDAIPUR (CORPORATE BANKING BRANCH) 013103000004312 IBKL0000392
13 Haridwar IDBI Specialised Corp branch Saheli Marg, Udaipur 392103000000028 IBKL0000392
14 Pantnagar IDBI Specialised Corp branch Saheli Marg, Udaipur 392103000000028 IBKL0000392
15 Vishakaptnam IDBI Specialised Corp branch Saheli Marg, Udaipur 013103000004312 IBKL0000392
16 Kayar Mines SBBJ Agucha, Dist. - bhilwara 51076160081 SBBJ0010530
INSTRUCTIONS TO THE Tender cum E-auction PARTICIPANTS
1. All those who have registered online with the auctioneer and wish to participate in the auction, should send their Caution Money Deposit (CMD) as instructed above. CMD must reach the Auctioneers as mentioned in cover page by the cut-off time.
2. Declaration and Letter of Interest (LOI) received thereafter or on the day of Tender cum E-auction for becoming Registered Participants will be rejected out rightly and such bidders will not be allowed to participate in the Live Tender cum E-auction and their DD will be returned to them through Courier at his/their risks. Hence, in your own interest, you are requested to complete all the formalities to become Registered Participant in advance and well in time.
3. Please Note the DD against CMD must be received by us in advance along with Registration Form and Profile Form attached herewith on or before date and time mentioned above. The Auctioneers / Seller are not liable for the delay or late receipt of DD whether sent through Courier or Post.
4. Please do not reveal / pass your User ID and Password to any other person/s. It is your personal property and we will not be responsible for any leakage or misuse or illegal use of your User ID and Password. Nevertheless, you will be held personally liable to the Seller and the Auctioneers for any misuse or illegal use of your User ID and password by other person/s and any successful transaction online by such unauthorized person due to your negligence will be considered as your own transaction and you will be required to fulfill the contract as per terms and conditions of the sale.
5. HZL reserves the right to modify and amend the terms & conditions and announce the same at any time before the auction concludes. Announcements during the auction on the website including announcement of any additional conditions OR correction in the catalogue and/or additions or deletions of items being offered for sale are being done with the consent and knowledge of the seller, and it is binding on the bidder.
6. Participation and bidding / submitting Offer in this tender shall be treated as conclusive evidence of the fact that the bidder has inspected the Tendered Material/goods and the documents pertaining to it and is satisfied in all respects regarding quantity, quality, condition of the Tendered goods, taxes and duties, and other extraneous factors and the Principle of Caveat Emptor (let the buyer beware) will apply. It shall also imply that the bidder has carefully gone
7 / 30
through and understood the terms and conditions of Tender including the amendments if any, prevailing at the time of Tender. Seller will not entertain any complaints or objections once Offer is submitted.
7. Seller does not give warranty or guarantee of the quality, quantity, measurement, condition Chemical composition of each individual item/s or lot/s that form the auction / tender property and about its “End Use” or fitness for a particular purpose. Sale is on “AS IS WHERE IS BASIS” and “NO COMPLAINT BASIS.”
8. The highest bidder/ offer do not get any right to demand acceptance of his offer. SELLER reserves the right to accept/ reject/ cancel any bid, withdraw any portion of the Auction / tender Property/material/goods at any stage from Auction / tender. Even after acceptance of bid/ issue of delivery order or release order/ deposit of full value by successful bidder, seller can reject/cancel the deal without assigning any reason there of. In the event of such rejection/ cancellation/ withdrawal, SELLER, shall refund the value of Auction / tender Property, if paid for, to the successful bidder. SELLER shall not be responsible for any damages/loss whatsoever to the successful bidder on account of such withdrawal.
9. In the event of default on the part of the bidder in fulfilling his contractual obligations, seller reserves the right to debar such bidder from participating in any future auction / tenders conducted on behalf of seller.
10. The prospective bidder has to register with the Auctioneer. 11. On payment of CMD, and on satisfying the pre-qualification norms as may be fixed from time to time by HZL,
Auctioneer will activate the User – Identity to enter into Website as mentioned above. 12. Bidders SHOULD NOT disclose their PASSWORD to anyone and safeguard its secrecy. Bidders are advised to
change the Password. 13. Time Extension: If any leading bid (bid higher than the highest at the point in time) is received within the last 5
minutes of closing time, the time will be extended automatically by 3 minutes. 14. Training: auctioneer will provide training (online) if required by the bidders at a mutually convenient date and time
before the Auction. 15. Bids: All bids placed are legally valid bids and are to be considered as bids from the bidder himself. Once the bid is
placed, the Bidders cannot reduce or withdraw the bid for whatever reason. If done so, the seller will forfeit the EMD. The highest and the latest bid on the Auction shall supersede all the previous bids of the bidder. Bidders may please note that in the event of a manual bid amount matching that of an auto bid, the manual bid will prevail and be considered. The bidder with the highest offer/ bid does not get any right to demand acceptance of his Bid.
16. Proxy Bid: - a. Proxy Bid facility is provided for bidders intending to place a maximum value for a lot/lots.
b. Proxy bid is not a confirmed bid. It is only the maximum ceiling amount set by the bidder to enable the auction engine to place bids on his behalf, whenever he is outbidded, up to the ceiling set by him.
c. Once proxy bid is set, the auction engine will consider the ceiling amount for the next possible Bid only, depending on the highest bid prevailing at that point of time and the increment amount prescribed for that particular lot.
d. Bidders may please note that in the event of a manual bid amount matching that of proxy bid, the proxy bid will prevail and be considered
17. HZL / Auctioneer shall ensure the smooth running in all good faith and intention. However HZL/ Auctioneer will not be held responsible for any failure of power, Network, server, hosting server, Internet connectivity, ISP or otherwise at Bidder's end or at auctioneer directly or indirectly affecting online method of Bidding.
GENERAL CONDITIONS OF SALE 1. The Company reserves the right to accept or reject the highest offer and all or any other offer without assigning
any reason whatsoever. 2. Inspection of the materials: For inspection of materials lying at various units of Hindustan Zinc Ltd, Please contact the
concerned person as mentioned in list attached herewith on any working day during working hours.
3. BALANCE PAYMENT & DELIVERY
a. Materials must be removed (after making balance payment along with Sales Tax, Excise Duty and TCS, if any) on or before due date, failing which penalty for delay in collection / balance payment (As given below) of the terms and conditions of the sale will be applicable.
b. In the event of the failure of the purchaser to pay the Balance sale value of Lot mentioned in clause for Balance payment & delivery ( As above ), the contract will automatically stand terminated and the Earnest Money Deposited will stand forfeited for the breach of contract by the purchaser. The lot in question shall be resold by the Company without any further reference to the Purchaser.
c. Balance to be paid within prescribed time by DD to the respective Unit directly. DD to be drawn on Bank as mentioned in Annex. – I.
4. Description of Materials and Quality and Quantity:
a. The materials shall be disposed off in “AS-IS-WHERE-IS basis & NO COMPLAINT” AND “WET, DRY OR RUSTY” conditions. Only material mentioned in the catalogue/bid sheet shall be delivered. Inside & outside attachment shall be removed from the nearest point, unless and otherwise mentioned.
8 / 30
b. Oxy-cutting / cutting may be considered on specific request by the purchaser depending upon the merit of the case, at the sole discretion of the Seller. Necessary cutting tools should be arranged by the purchaser at his own cost. However, CLZS shall not allow cutting
c. Numbers, quantities or tonnage or nature of materials given in the catalogue are approximate and the materials will be sold without any regard or consideration to these numbers/ tonnage or nature of materials and no Warranty or guarantee shall implied. The quantity of material may vary considerably viz. it may be much more than the approximate quantity indicated in the catalogue or much less. The Purchaser must lift the entire quantity within the prescribed time.
d. Description given in our enclosed list is in brief. Offers by the bidders will be deemed to have been made on the clear understanding that intending bidder / bidders have satisfied themselves fully with regard to the nature, condition, quality of goods during inspection or otherwise. No error, omission or mis-statement or mis-description whatsoever and howsoever made or published whether in advertisement or list or otherwise and no defects or faults in the goods shall invalidate the contract or be subject matter of any claim on the part of the bidder whether in compensation or otherwise howsoever nor will any such claim be entertained by the sellers.
e. The quantity indicated in our list of scrap items is only an estimate for calculating the amount of deposits required to be paid by the bidder, and has nothing to do with quantity of material that may be available. However, since the paramount interest of the Seller is to get the area cleared from the accumulated material, the purchaser will have to remove the entire quantity whether these are far beyond the limit of approximation indicated or much less than the approximation indicated.
5. Removal of Materials:
a. Purchaser is responsible to weight the empty truck at the Seller weigh bridge and produce the necessary document so that the weight of the empty truck so taken could be deducted from the weight of the fully loaded truck.
b. All the consignments must be weighed even if they are sold on lot basis for Seller’s record.
c. In order to facilitate the Seller to complete the transaction before 4.00 p.m. the goods should be collected before 3.30 p.m. on any working day with prior permission from the concerned Department within the stipulated delivery period.
d. Should the Actual purchaser wish to take delivery of the scrap material through a representative, he must authorize the later through a letter of authority or continuing authority which shall be presented to the officer concerned. Officer concerned may refuse to act on such authority and the authority holder/agent/purchaser to satisfy the officer concerned that the authority is genuine. Delivery to such person shall be sole responsibility of the purchaser & no claim shall lie against the Seller on any account whatsoever, if delivery is offered to a wrong person.
e. The Seller reserves the right to unload the vehicles for inspection purpose. If it is suspected at any point of time that the purchaser has loaded the material / materials for which he is not actual purchaser or if the purchaser is found to carry excess material than what has mentioned in the documents, the Co. has all power and authority to detain the truck, unload the goods at the cost & expenses of the purchaser & terminate the contract forthwith and forfeit the sale value & claim such further losses and damages that may be caused to the Seller.
f. It shall be the responsibility of the purchaser to see that he or his servants or agents collect and load only that quality and kind of scrap that is covered under the contract and in the event of his servants or agents finding any other quality or kind or scrap mixed with the scrap allotted to him he should forthwith bring it to the notice of the yard master and lift scrap only after segregation.
g. During the course of removal of the scrap material, if any damage is caused to the Seller's premises, installations or instruments, the buyer will be entirely held responsible to make good such losses. Till such period, the damage is repaired or compensated to the Seller; delivery of any lot/s will not be affected to the said bidder.
h. Lots sold on Accumulated / Arranged basis as per the tender must be removed by the purchaser on or before the scheduled period as mentioned hereinabove.
6. Decision in case of disputes:
a. In case of any dispute regarding the contract, the decision of the Seller shall be final and binding. If there is any dispute as to the last or highest bid or dispute in identifying the item belonging to particular lot, the dispute shall be determined by the Seller and their decision shall be final and binding to all.
b. Only the appropriate Court in Udaipur, Rajasthan will have Jurisdiction to deal with any disputes arising out of this contract.
c. In case of any dispute arising out of or relating to the terms of this contract the matter shall be referred to Sole Arbitrator appointed by the Seller. The arbitrator so appointed shall act in accordance with the provision of Arbitration & Conciliation Act, 1996 and the venue of arbitration shall be Seller’s Office or as suggested by the Seller.
7. Right of Acceptance / Rejection of offer :
a. The Seller reserves the right to withdraw wholly or partially any or all the items set for sale at any time during the period of contract without assigning any reasons.
9 / 30
b. The Auctioneer / Seller also reserve the right to accept any bid on "Subject To Confirmation” and the Seller’s final decision will be informed to the purchaser as mentioned above.
c. The goods are sold subject to the reserve price fixed by the Seller. The Seller is not bound to accept the highest offer. The Seller reserves the right to reject any CONDITIONAL offers.
8. Termination of Contract: The Seller reserves the right to terminate the contract at any point of time by giving three days’ notice on the following ground.
a. Unsatisfactory execution or performance of the contract by the purchaser.
b. For improper behavior of the purchaser or breach of the terms and conditions of the contract.
c. Decision of the Seller to terminate the contract shall be final and binding and no claim for damages and compensation shall not be entertained. In the event of the purchaser or his agent or servant committing or attempting to commit theft, fraud, dishonesty or gross misbehavior in connection with the subject matter of this contract or in any other -connection whatsoever concerning the business of the Seller, the Seller will be entitled to terminate the contract - forthwith and forfeit the Security Deposit at its sole discretion.
9. Passing of Property In the goods: It is expressly made clear that the property in the form of goods whether sold by units, weights or lots, whether arranged or otherwise, will remain that of the Seller and will pass on to the purchaser only when material is taken out by the Purchaser from the factory Premises after getting valid dispatch documents.
10. Other Terms and Conditions :
a. Excise, Sales Tax, TCS or any other taxes under the relevant Act will be charged extra at the prevailing applicable rate at the time of delivery and the rate offered shall be exclusive of all taxes. The rates mentioned in the catalogue are only indicative for the guidance of the bidders.
b. Contractors shall be fully responsible for safety of their workers & equipment and materials/ equipment of Hindustan Zinc Limited under their custody. Contractor shall abide the safety rules prescribed by the Govt.
c. Contractor shall be responsible for and shall follow safety rules under the provision of Factory act 1948, Rajasthan Factory Act 1951 & Indian Electricity Safety Rules as amended from time to time and other statutory safety rules & regulation in force during pendency of the contract.
d. The Contractor shall provide all safety gadgets/ equipment to his workers before putting them on job and shall also ensure that his workmen make use of the safety items while at work.
e. Charges towards any damage of the HZL equipment / material caused due to mis-handling by contractor’s workers shall be deducted from Contractor’s bill after assessment by Seller’s Engineer In charge. The assessments of Seller’s Engineer In charge shall be final & binding on the Contractor.
f. RULES AND REGULATIONS: The contractor shall follow all the rules and regulations under contract Labor Act, Factories Act, Industrial Dispute Act, Payment of Bonus Act, PF Act, ESI Act, Gratuity Act, Maternity act, All India Motor Vehicle Act 1988, Rajasthan Motor Vehicle Rules 1951, as amended from time to time and other laws in force during the currency of Contract.
g. For Batteries, LSHS/FO Oil Sludge, TORCH CELL/PENCIL CELL, USED HSD/ OLD HT OIL /Used oil etc MOEF certificate is required.
h. All trucks, handcarts, carrying such materials outside Seller’s premises are subject to inspection by Security Deptt. At the gate. If required, the buyer will have to unload the vehicle if Security Officer Demands for a surprise check.
i. Any person employed or engaged by the buyer for the purpose of execution of the contract shall be required to observe and follow the rules and regulations that are prevailing in Seller’s Company. The movement of Buyer’s persons shall be restricted only to the place of work assigned to them. Each person engaged by the buyer shall be required to obtain a Pass from Security Department for entering and leaving the Factory premises. All the labor engaged by the buyer shall be subjected to inspection by Security Dept.
j. All notices, letters sent to the purchaser shall be deemed to have been received by him/them on expiry of 48 hours from the time of posting if the same are sent at the address given by the purchaser.
k. If any person/s bid at the auction on behalf of the undisclosed principal, he / they shall immediately after the bid at the time of payment of EMD, has to disclose the name of his / their principal who is the actual purchaser and the receipt for the caution money and/or earnest money would be issued in the name of the principal.
l. Resale of material/goods will not be allowed. Release order will be issued in the name of actual successful purchasers only.
m. The purchaser shall not be entitled to resell any lot or part of a lot while the goods are still lying within the premises of the Company and no delivery would be affected by the Company to any person other than the purchaser whose names are mentioned in the delivery order.
n. All purchasers of the lots before collecting purchased materials from inside the works should contact the Company's authorized officer to get them fully acquainted with safety rules and regulations. Purchasers will be allowed to start
10 / 30
collecting materials only when they have confirmed in writing that they are agreeable to follow the various safety rules and plant regulations.
o. The Company will in no way be responsible for any accident, damage or injury to the contractor's workmen or equipment while on HZL, s premises.
p. If the successful purchaser at any stage either neglects or refuses or is unable to take delivery of the materials for any reasons whatsoever or the performance of the purchaser is unsatisfactory, the Company will have the right to terminate the contract, enforce forfeiture of purchaser's EMD/security deposit and claim such further losses and damages that may be caused to the Seller determined and declared at its sole discretion.
q. In the event of purchaser failure to remove the materials and to pay price thereof, the Seller shall be free to sell the goods to any person or persons and to recover from the original purchaser the amount by which materials actually sold, falls short of the price agreed by the original purchaser. This does not in any way affect the right of the Seller to forfeit EMD as provided herein.
r. The successful purchaser is also required to sign an agreement to complete the sale proceedings according to the conditions hereof and subscribe his signature to the Bid-sheet against the lot or lots knocked down to him. In the event of the purchaser failing to sign the agreement or Bid-sheet the goods may, if the Auctioneers / Company think fit, be put up for sale again immediately and resold on account and at the risk of the defaulting purchaser who shall be responsible for the deficit, if any, in the price and such deficit shall be debt due from the defaulting purchaser, but he shall not be entitled to any increase arising from such resale.
s. Special Conditions of sale or Additional Conditions of sale, if any, will be announced at the time of auction.
11 / 30
WHISTLEBLOWING POLICY w.e.f. 23.01.2008
Complaints and the Investigation Procedures
The following procedures have been adopted by the Audit Committee of Hindustan Zinc Limited (the “Company”) to govern the receipt, retention, and treatment of Complaints and to protect the confidentiality and anonymity of the stakeholders / employees / cases reported. These policies and procedures apply to and are available to all employees of the Company, and all external stakeholders.
I. POLICY
Customers have the opportunity to submit / report ‘Complaints’ pertaining to the following areas such as:
a) Fraud (an act of willful misrepresentation which would affect the interests of the concerned) against investors, securities fraud, mail or wire fraud, bank fraud, or fraudulent statements to the Securities and Exchange Board of India (the “SEBI”), the U.S. Securities and Exchange Commission (the “SEC”), the relevant stock exchanges, any other relevant authority or members of the investing public.
b) Violations of any rules and regulations applicable to the Company and related to accounting and auditing matters
c) Intentional error or fraud in the preparation, review or audit of any financial statement of the Company
d) Any violations to the Company’s ethical business practices as specified in the Company’s Code of Conduct policy
e) Any other event which would affect the interests of the business
The company will protect the confidentiality and anonymity of the complainant to the fullest extent possible with an objective to conduct an adequate review. External stakeholders such as vendors, customers, business partners etc. have the opportunity to submit ‘Complaints’; however, the Company is not obligated to keep ‘Complaints’ from non employees confidential or to maintain the anonymity of non- employees. We encourage individuals sending ‘Complaints’ / raising any matter to identify themselves instead of sending anonymous ‘Complaints’ as it will assist in an effective complaint review process.
Post review, if the complaint is found to be have been made with MALA FIDE intention, stringent action will be taken against the complainant. We encourage employees to report genuine ‘Complaints’ and those submitted in true faith.
II. PROCEDURES
Receipts of ‘Complaints’
All the ‘Complaints’ under this policy should be reported to the Group Head - Management Assurance, who is independent of operating management and businesses. The contact details are as follows:
Group Head – Management Assurance, Vedanta, 75 Nehru Road Vile Parle (E), Mumbai 400 099. Tel No. +91- 22 - 66461000 Fax No. +91- 22 - 66461450
12 / 30
‘Complaints’ can also be sent to the designated E-Mail ID: [email protected]; the custodian of which is Group Head – Management Assurance. If a complaint is received by any other executive of the company, the same should be forwarded to the Group Head – Management Assurance at the above address.
Treatment of ‘Complaints’
1. Group Head - Management Assurance shall review the Complaint. Investigations may be carried out either by the MAS team or any other external agency / legal counsel or any company employee(s) as the Group Head – Management Assurance may feel appropriate. The investigation team will submit their findings or recommendations to the Group Head - Management Assurance.
2. Once every six months and whenever else as deemed necessary, Group Head - Management Assurance shall submit a report to the Audit Committee that summarizes the number of ‘Complaints’ received and status of actions taken.
Access to Reports and Records and Disclosure of Investigation Results
All reports and records associated with ‘Complaints’ are considered confidential information and access will be restricted to members of the Audit Committee, Group Head – Management Assurance and any other person as permitted by the Group Head – Management Assurance. ‘Complaints’ and any resulting investigations, reports or resulting actions will generally not be disclosed to the public except as required by any legal requirements or regulations or by any corporate policy in place at that time.
Retention of Records
All documents relating to such ‘Complaint’s made through the procedures outlined above shall be retained for at least five years from the date of the ‘Complaint’, after which the information may be destroyed unless the information may be relevant to any pending or potential litigation, inquiry, or investigation, in which case the information will be retained for the duration of that litigation, inquiry, or investigation and therefore as necessary.
Amendment to the policy
The Company reserves its right to amend or modify this Policy in whole or in part, at any time without assigning any reason whatsoever and the same will be posted on the company website
13 / 30
GENERAL RULES AND REGULATION GOVERNING CONDUCT OF ONLINE AUCTIONS ON THE “SERVICE PROVIDER” PLATFORM
INTRODUCTION: MJUNCTION SERVICES LTD, a company incorporated and registered in India and having its registered office at TATA CENTRE 1ST FLOOR,43 J L Nehru Road, Kolkata 700 071 India (hereinafter referred as “Service Provider”) is conducting this online forward auction on behalf of Hindustan Zinc Limited (hereinafter referred to as the “Client”). The General Rules and Regulations provided herein govern the conduct of on line Forward Auctions arranged by “Service Provider” on its Auction Platform. These rules cover the roles and responsibilities of the Parties in the online Forward Auctions on the Auction Platform. The acceptance, in-toto, to these General Rules and Regulations governing conduct of Online Auctions, and Terms and Conditions for sale of Materials belonging to Hindustan Zinc Limited by Online Auction is a pre–requisite for securing participation of each Customer in the Online Auctions. The key terms pertaining to the online Forward Auctions are provided in the as under. Prospective customers are advised to read through the same.
ROLE OF “SERVICE- PROVIDER”
1. “Service Provider’ is the agency (operator) primarily providing the service of the Forward auction to the “Client”.
2. Finalisation of the auction items in consultation with the Client.
3. Defining of bidding rules for each auction in consultation with the client.
3.1 Enhancing customer awareness of and comfort with the auction mechanism and bidding rules. Input of the Auction items and defining the bidding rule in the auction engine.
3.2 Enlarging the customer base by introducing new customers.
3.3 Collection of Earnest Money Deposit (EMD), Letter of Interest etc. from the willing customers
3.4 Providing access to the approved customers to participate in the Auction.
3.5 Summarizing the Auction proceedings and communicate the outcome to the Client.
The responsibility of fulfillment of the contract rests between the customers and the client and the responsibility of the “Service Provider” shall be restricted to the extent of the Services provided by them.
14 / 30
ROLE OF CUSTOMER The role of the Customer is outlined below:
The Customer would participate in the auction with the aim of bidding to secure the auctioned item in the Online Auction.
The Customer would be provided access to the Online Auction through a “User ID” protected by a “Password”. The Customer needs to ensure that the “User ID” and “Password” is not revealed to unauthorized persons. Customers are also requested to change the Password allocated to them by the “Service Provider” to keep their confidentiality. However it would be Customer’s sole responsibility to ensure the security and privacy of the same and he/they would not hold the “Client” / “Service Provider” responsible in any manner whatsoever for any misuse of these user IDs and/or Password. The access to the auction mechanism shall be provided to all the approved Customers subsequent to obtaining their written consent to the General Rules & Regulations and the Letter of Interest. The payment of Pre Bid Deposit as decided by the Service Provider before the start of the Online Auction will be one of the necessary conditions for participating in the auction.
Customers hereby confirm that they shall commit to lift the item (being bid for) at the price entered by them in the auction engine AND at the terms and conditions specified herein by the Client. All prices entered shall be legally binding on the Customers. Customers are strongly advised to exercise due diligence while placing bids. Failure to honour the bids placed during online bidding shall render the Customers liable for penal action as deemed fit by “Client” / “Service Provider”.
In the event of winning an allotment in the auction mechanism, the Customer shall commit to fulfill outlined obligations under the contract between Winning Customer and Client .
The Customers shall bid on the terms & place their bid in the auction engine in the manner specified herein. The Customers shall not stipulate any conditions on their own unless the terms herein expressly permit such conditions being stipulated by the Customer. Bids entered with conditions attached shall be considered Conditional bids & “Service Provider” retains the right of rejecting these bids even without intimating the Client.
BIDDING RULES The Bidding Rules refer to the information and terms defined specifically for a particular auction. The purpose of the Bidding rules is to provide approved customers with the information and terms specific to the auction in which they are bidding. This would include: Definition of the unit bidding.
Start Time and duration of the auction.
Any extension of the duration of the auction in the event of bids being received towards the end of the pre-specified duration.
Start Bid Price.
Specified Unit for Bidding.
Price Increments and any reduction in the price increment in the auction in the event of inactivity.
Other attributes (informational/non-negotiable in nature). While it shall be the endeavor of “Service Provider” to specify these rules at the earliest for each Online Auction. The “Service
Provider” only in the case of unforeseen contingency beyond its control shall retain the right to delay the announcement of these biddings rules or modify rules specified earlier at the time of the online bidding in prior written consent of the Client. These details would be available to the customers on the Auction Engine at the time of bidding. The participation in the auction process presumes complete awareness and understanding of the bidding rules.
CONDUCT OF THE AUCTION:
Only those Customers who have been approved by the “Client” and handed over stamped and manually signed “General Rules and Regulations governing conduct of Online Auction along with Letter of Interest, required EMD amount and other necessary documents to the “Service Provider” prior to the start of Online Auction will be given “Login ID” and “PASSWORD” to enable them
view and participate in Online Auction. “Hindustan Zinc Limited” will have the sole discretion to approve the Customers who
have submitted bids and no requests will be entertained in this regard by Service Provider from the Customers. The Online Auction shall be conducted on pre-specified date. The Key Terms pertaining to the conduct of Online Auction such as “START TIME”, “DURATION”, “END TIME” AND “AUTO EXTENSION FACILITY” Shall be specified separately for each Auction.
“Service Provider” retains the right to cancel or reschedule the Online Auction, with the prior written approval of the Client, on any of the following reasons:
The number of confirmed Customers is deemed insufficient to conduct the Online Auction
Some of the confirmed Customers are unable to access the module due to infrastructure problems such as sustained power failure or telecommunication breakdown.
There are no bids, which are equal to or below Start Bid Price.
Any other reason, which in the opinion of “Service Provider” / “Client” requires such action to be initiated.
The duration of Online Auction may also vary from the pre-specified period of time either on account of termination of the Online
Auction by “Service Provider” on the advice of the Client. OR
15 / 30
In case of situations where it is felt that continuance of the auction proceedings is prejudicial to the smooth conduct and / or the integrity of the auction process.
OR due to Auto Extension during the Auction, duration may increase from specified period.
In the event of any problems being faced in the smooth conduct of the Online Auction, “Service Provider” with the approval of the Competent Authority of the Client, shall have the right to undertake one or more of the following steps:
Cancellation/ premature termination of the Online Auction with/ without a subsequent rerun of the auction on a mutually decided date
Cancellation of a bid
Locking / deactivate a Customer’s account (suspension of operations in the account), etc. In case of failure of net connection, Customer will communicate his best price to the “Service Provider” and “Service Provider” will
bid on behalf of the Customer with the minimum increment until the bid price reaches the best price offered by the Customer, by proxy bidding mechanism.
The best price communicated by the Customer will have to be authenticated by written confirmation or fax to the “Service Provider” and will be kept confidential between the “Service Provider” and the Customer. Customer will be bound by the price offered.
LIABILITY OF “SERVICE PROVIDER”
“Service Provider” shall not be liable to the Client/ Customers participating in the Online Auction or any other person(s) for:
Any breach of contract between winning Customer and Client.
Any delays in initiating the online auction or postponement / cancellation of the online auction proceedings due to any problem with the hardware / software / infrastructure facilities or any other shortcomings.
While, reasonable care and diligence will be taken by “Service Provider” in discharge of its responsibilities such as design of the
online bid, communication of bid details and rules, guidance to client/ customers in accessing the Auction Engine and placing bids, etc. the customers shall specifically indemnify “Service Provider” from all liabilities for any shortcomings on these aspects. It is clearly understood that these activities are undertaken by “Service Provider” to assist the Customers in participation but the ultimate responsibility on all these counts lies totally with the customers.
RIGHT OF THE CLIENT: The Client reserves the right to partially or totally accept or reject any / all bids placed in the Online Auction without assigning any
reason whatsoever. The decision of the Client would be final and binding on the Service Provider and the Customer in any such case. In case the Online Auction is cancelled by Client, then Service Provider shall undertake the re-auction at its own cost, as directed by the Client.
CONFIDENTIALITY CLAUSE: “Service Provider” undertakes to handle any sensitive information provided by the Client or confirmed Customers for the auctions
conducted with utmost trust and confidentiality. JURISDICTION Any disputes relating to the online auction module shall be subject to the sole jurisdiction of Court of Law having jurisdictions over
the Plant from where the Materials are being sold. Signed in acceptance of the above terms and conditions Name: Signature Designation of signatory Date Place
Telephone / FAX no._______________________ _____________________________________________________________
16 / 30
DEFINITION OF KEY TERMS Auction Auction refers to a forum where the requirement for one/more lots of an item is stated and the participants (customers) are required to bid down the price to be selected to supply the requirement. Online Auctions Online auctions refer to those auctions conducted through the Internet with the customers (from one or more locations) simultaneously bidding to be selected for supplying the item/s on Auction. In other words, the venue for the auction is on an Internet website/ platform. Services refer to the Online Auctions conducted by the Service Provider through its website as the venue for the purpose of the Online Auction and also includes the responsibilities narrated under the head “ROLE OF SERVICE PROVIDER” above. Award at the Auction In a single winner format, only one customer (normally the customer who quotes the highest price) is awarded all the units of the item being auctioned. The customer quoting the highest price is normally allotted the item. Client Client is the individual/business entity who has contracted "Service Provider" to conduct such auction. In case of auction, the purpose would be the genuine intent to sell the selected item/s (Lot) to the customers desiring to buy these items from the Client. Customer Customer is the individual/business entity participating in the auction, intending to buy the item(s) from the Client. To be become a Customer in the auction, a business entity has to secure client approval for participation and also provide written assent to the General Rules and Regulations .
Auction Engine Auction Engine refers to the software that encapsulates the entire auction environment, processing logic and information flows. "Service Provider" is the sole owner of the auction engine and retains exclusive right over the utilisation of the same. Timings of the Online Bid All the timings of the Online Bid shall be based on the time indicated by the Server hosting the Auction Engine. It shall be the endeavor of "Service Provider" to ensure that the Server Time reflects as closely as possible the Indian Standard Time (IST) i.e. GMT + 0530 hrs. However, in the event of any deviations between the Server Time and the Indian Standard Time, the functioning of the Auction Engine (Launch, operation, and closure) would be guided by the Server Time. Customers are advised to refresh both the windows of the Auction Module check the exact Server Time (displayed in both the windows). Preview Time
17 / 30
Preview Time refers to the period of time that is provided prior to the commencement of bidding. This is to facilitate approved participants to view the auction details such as item specifications, bidding details and bidding rules. The purpose is also to familiarize participants with the functionality and screens of the auction mechanism. It is not mandatory for "Service Provider" to provide Preview Time. Start Time. Start time refers to the time of commencement of the conduct of the online auction. It signals the commencement of the Price Discovery process through competitive bidding. Duration of the Auction. It refers to the length of time the price discovery process is allowed to continue by accepting bids from competing customers. The duration of the auction would normally be for a pre-specified period of time. However, the bidding rules may state the conditions when the pre-specified duration may be curtailed/extended. The conditions include:
Curtailment of auction duration in the event of no bids for a specified period of time (Inactivity Time)
Automatic extension in the event of bids being entered towards the end of the scheduled duration to facilitate the other customers to view and react to the bid.
Auto Extension of the Auction Timings.
In the event of bids in the last few minutes of the scheduled bid time, the Bid Timings are automatically extended for a specified period from each such bid. Such Auto Extension shall continue until no bids are placed for the specified period (Engine remains inactive for the specified period). The Inactivity Time for Auto Extension purpose is normally X minutes. "Service Provider" however retains the right to change the same. The Inactivity Time applicable for the particular Online Bid shall be visible to the customers under the Bidding Rules module on the engine. End of the Auction. End of the Auction refers to the termination of the auction proceedings signaling an end to the price discovery process.
Auction Report.
"Service Provider" would provide an Auction Report to the Client containing a summary of the auction proceedings and outcome. The Auction Report would constitute the official communication from "Service Provider" to the client about the outcome of the Auction.
18 / 30
Material List of Items for Disposal
1. Material Description
Lot No
Material Code
Material Description Unit Qty UOM
ED %
VAT %
TCS %
Priority CMD
1 100000001 M.S. SCRAP CLZS Pyro
309.2 MT 12.5 5 1 PRIORITY
LOT 630737
2 100000001 M.S. SCRAP DSC 119.7 MT 12.5 5 1 PRIORITY
LOT 259753
3 100000001 M.S. SCRAP SKM 65.0 MT 12.50%
5.00%
1.00%
PRIORITY LOT
137800
4 100000001 M.S. SCRAP (Cutting & hammering
allowed) ZWM 80.0 MT
12.50%
5% 1% PRIORITY
LOT 153600
5 100001018
STAINLESS STEEL SCRAP, SS 316/316 L (WITH MINOR ATTACHMENT) lots are given as is where is basis No sorting ,segregation ,testing etc allowed at
the time of lifting)
CLZS Pyro
28.6 MT 12.5 5 1 PRIORITY
LOT 385127
6 100001018 STAINLESS STEEL SCRAP, SS 316/316 L DSC 11.2 MT 12.5 5 1 PRIORITY
LOT 132804
7 100001658 SCRAP S.S. 904 L/ UB 6 ZSD 4.3 MT PRIORITY
LOT 129900
8 100000026 SCRAP SPARE PARTS (HEMM, MILL
ETC.) SKM 60.6 MT
12.50%
5.00%
1.00%
PRIORITY LOT
183679
9 100000003 MANGANESE STEEL LINERS SCRAP(
Non Megnatic) (hammering allowed) RAM 48.0 MT
12.50%
5% 1% PRIORITY
LOT 158880
10 100000016 NI-HARD SCRAP (Pump Parts)
(hammering allowed) RAM 32.0 MT
12.50%
5% 1% PRIORITY
LOT 123840
11 100000026 USED SCRAP PARTS (Hammering &
Cutting allowed) RAM 160.0 MT
12.50%
5% 1% PRIORITY
LOT 386400
12 100001570 Sag Mill Liner Scrap (Cr & Mo)
(Hammering allowed) RAM 170.0 MT
12.50%
5% 1% PRIORITY
LOT 503200
13 100001748 Scrap Grinding Ball (Hyper Steel)
“without soil & Grit etc/ cleaning & screening allowed”.
RAM 420.0 MT 12.50%
5% 1% PRIORITY
LOT 1012200
14 100002268 CAST STEEL SCRAP RAM 83.0 MT 12.50%
5% 1% PRIORITY
LOT 161020
15 NPA Scrap BEML Make ExcavaMTr Model
PC-1000 (1 No) RAM 80.0 MT
12.50%
5% 1% PRIORITY
LOT 160000
16 NPA Pressure filter complete assembly RAM 48.0 MT 12.50%
5% 1% PRIORITY
LOT 120000
17 NPA ExcavaMTr No.-11,12 & 14 RAM 275.0 MT 12.50%
5% 1% PRIORITY
LOT 605000
18 NPA Track Dozer No.-05, 08, 09
(M/C S.No.-10821, 464, G-10956) RAM 90.0 MT
12.50%
5% 1% PRIORITY
LOT 211500
19 100000059 EMPTY PLASTIC JERRYCAN (20-30) - till
March 2016 DSC 1300
NOS
0 5 1 15000
20 100002389 EMPTY PLASTIC JERRYCAN (50-
60)Black - till March 2016 DSC 2600
NOS
0 5 1 15000
21 100000073 Mixed sludge(Waste oil) - till March
2016 DSC 25 MT 0 5 1 15000
22 100000012 SCRAP WOODEN PACKING - till March
2016 DSC 130 MT 0 5 1 50000
23 100000012
SCRAP WOODEN PACKING(GENERATION BASIS
MONTHLY QTY 2 TO))avaible qty 12 TO till March 2016
SKM 30 MT 5.00
% 1.00%
20000
24 100001318 HDPE/LDPE/PP/Polyster strap scrap (generation base up to march 16)
CLZS Pyro
200 MT 12.5 5 1 20000
25 100002058 FRP SCRAP WITH ATTACHMENT
(generation base up to March 16) CLZS Pyro
100 MT 12.5 5 1 Full
Advance
19 / 30
26 100000943
SCRAP PACKING MATERIAL INCLUSIVE OF WOOD,PAPER /RADDI /GATTA
(Excluding Destroy or burnt wooden ) on arising basis upto 30-Sept-2015
(buyer have to clear existing material with in one month period from sale
order)
RAM 50.00 TO Nil 5% 1% 25000
27 100001750 Light MS scrap of dented & broken
drum iron stip , GI DUCTING & Sheet etc on arising basis upto 30-Sept-2015
RAM 35.00 TO Nil 5% 1% 50000
28 100000114 FRP SCRAP (Ready stock 70.00 MT) till
March 2016 ZSD
100.00
TO Full
Advance
29 100001059 SCRAP PACKING MATERIAL INCL
WOOD - Till March 2016 ZSD 24.00 TO 10000
30 100000091 USED / BURNT OIL (Lifting min. 1 MT each quarter- 2nd fortnight) - March
2016 ZSD 4.00 TO 15000
31 100000002
SCRAP EMPTY DRUMS (MS) 210 LTR CAP
( only for cpcb registered /reg. recycler )
CLZS Pyro
28 NO 0 5 1 994
32 100000004 COPPER SCRAP CLZS Pyro
1,649 KG 12.5 5 1 63487
33 100000006 ALUMINIUM SCRAP CLZS Pyro
1.1 MT 12.5 5 1 9559
34 100000007 SCRAP M.S.PIPE CLZS Pyro
11.6 MT 12.5 5 1 24226
35 100000009 SCRAP CONVEYOR BELTS CLZS Pyro
21.6 MT 12.5 14.5 1 108155
36 100000009 SCRAP CONVEYOR BELTS (lot-2
Rubber belt filter) CLZS Pyro
5.0 MT 12.5 14.5 1 5000
37 100000014 SCRAP TYRES (ASSORTED SIZE) CLZS Pyro
1.8 MT 12.5 14.5 1 2376
38 100000015 BEARINGS SCRAP CLZS Pyro
6.0 MT 12.5 5 1 17991
39 100000017 FILTER CLOTH SCRAP CLZS Pyro
2.9 MT 12.5 5 1 4948
40 100000018 STAINLESS STEEL SCRAP CLZS Pyro
2,188 KG 12.5 5 1 21005
41 100000019 CAST IRON SCRAP CLZS Pyro
15.7 MT 12.5 5 1 32886
42 100000021 SCRAP ALUMINIUM CABLES CLZS Pyro
17.2 MT 12.5 14.5 1 93419
43 100000022 RUBBER / RUBBER WITH M.S.ATTACH
SCRAP CLZS Pyro
3.3 MT 12.5 14.5 1 4683
44 100000028 BULBS / TUBE LIGHT SCRAP CLZS Pyro
335 KG 12.5 14.5 1 34
45 100000036 USED / SCRAP ALUMINA REFRACMTRY
BRICKS CLZS Pyro
55.7 MT 12.5 5 1 4177
46 100000042 HDPE / Plastic & their Pipe Scrap CLZS Pyro
1.4 MT 12.5 5 1 2673
47 100000063 BURNT OIL (Required CPCB
registration) Generation base up MT Sep15)
CLZS Pyro
30.0 MT 0 5 1 151500
48 100000068 RUBBER SCRAP AND CUT PIECES
CONVEYOR BEL CLZS Pyro
18.5 MT 12.5 14.5 1 12981
49 100000072 SCRAP CI LIQUATION KETTLE CLZS Pyro
5.7 MT 12.5 5 1 9509
50 100000073 Mixed sludge(Waste oil) (Required
CPCB registration) Generation base up MT Sep15)
CLZS Pyro
10.0 MT 0 5 1 27200
20 / 30
51 100000088 M.S. Pipe Scrap ( removed from Heat
ex.) CLZS Pyro
34.4 MT 12.5 5 1 68760
52 100000115 MISC. ELE./ INST. ITEMS SCRAP CLZS Pyro
7.9 MT 12.5 14.5 1 45926
53 100000119 SCRAP ELECTRICAL HOIST CLZS Pyro
1.1 MT 12.5 14.5 1 4981
54 100000120 S.S. SCRAP WITH MS ATTACHMENT CLZS Pyro
4.4 MT 12.5 5 1 31246
55 100000144 USED PP FILTER ELEMENT CLZS Pyro
133 NO 12.5 5 1 28728
56 100000157 M.S.RAILS SCRAP CLZS Pyro
1.4 MT 12.5 5 1 3450
57 100000179 MS WITH SS ATTACHMENT CLZS Pyro
2.4 MT 12.5 5 1 5122
58 100000215 SCRAP RADIATOR CLZS Pyro
271 KG 12.5 5 1 3388
59 100000218 Scrap Machinery / Equipment CLZS Pyro
34.0 MT 12.5 5 1 95332
60 100000246 UTENSIL SCRAP CLZS Pyro
312 KG 0 5 1 1264
61 100000288 G.I. SCRAP (IRON) CLZS Pyro
6.2 MT 12.5 5 1 12529
62 100000388 SCRAP SILICON CARBIDE REFRACMTRY CLZS Pyro
11.8 MT 12.5 5 1 28508
63 100000546 M.S. AND SS TURNING SCRAP CLZS Pyro
1.7 MT 12.5 5 1 2511
64 100000588 SCRAP ELECTRICAL PANELs CLZS Pyro
1.3 MT 12.5 14.5 1 4721
65 100000808 ELECTRICLA SCRAP (AC/COOLER
BODIES,TUBE, CLZS Pyro
1.0 MT 12.5 14.5 1 1830
66 100000898 EMPTY PLASTIC DRUMS CAP.200 LTRS CLZS Pyro
57 NO 0 5 1 2423
67 100000918 MISC. ITEMS ROCK LIKE MATERIALS CLZS Pyro
298.3 MT 12.5 5 1 119331
68 100000943 SCRAP PACKING MATERIAL INCL
WOOD Generation based upto MT Sep15)
CLZS Pyro
200.0 MT 0 5 1 70000
69 100000945 SCRAP MS/GI/SS BRAIDED HOSES CLZS Pyro
3.3 MT 12.5 5 1 1110
70 100000982 SCRAP ELECT MOMTR WITH
PUMP,HOUSING CLZS Pyro
5.5 MT 12.5 14.5 1 14824
71 100001059 MS SCRAP(LIGHT MS,STRAP,CAGE) CLZS Pyro
15.1 MT 12.5 5 1 24683
72 100001069 BURNT TRANSFORMER OIL (Required
CPCB registration) CLZS Pyro
4.8 MT 0 5 1 20606
73 100001072 SCRAP ELECTRICAL MOMTRS & PARTS CLZS Pyro
2.0 MT 12.5 14.5 1 9648
74 100001108 ALUMINIUM POWDER SCRAP CLZS Pyro
0.6 MT 12.5 5 1 3422
75 100001158 SCRAP FURNITURE CLZS Pyro
1.1 MT 0 5 1 659
76 100001199 MS SCRAP CONTAINER CLZS Pyro
16.3 MT 12.5 5 1 48840
77 100001219 SCRAP POLYAMIDES & PVC
MEMBRANE CLZS Pyro
1.9 MT 12.5 5 1 1028
78 100001258 WASTE GREASE (Required CPCB
registration) CLZS Pyro
1.8 MT 0 14.5 1 1991
79 100001519 Scrap Engines, Transmission of HEMM
eqpt CLZS Pyro
1.3 MT 12.5 5 1 4910
80 100001619 USED / SCRAP INSULATION BRICKS CLZS Pyro
19.5 MT 12.5 5 1 492
21 / 30
81 100001628
SCRAP, STAINLESS STEEL - SS 309 / SS 310
lots are given as is where is basis No sorting ,segregation ,testing etc
allowed at the time of lifting)
CLZS Pyro
1,712.04
KG 12.5 5 1 27906
82 100001629
SCRAP, STAINLESS STEEL - SS 304/321 lots are given as is where is basis No
sorting ,segregation ,testing etc allowed at the time of lifting)
CLZS Pyro
920 KG 12.5 5 1 8234
83 100001630
SCRAP, STAINLESS STEEL - SS 409/410 lots are given as is where is basis No
sorting ,segregation ,testing etc allowed at the time of lifting)
CLZS Pyro
13,947
KG 12.5 5 1 41144
84 100001639 Hi Chrome Scrap ( Pump Parts ) CLZS Pyro
0.4 MT 12.5 5 1 3320
85 100001688 Scrap PPH pipes and fittings CLZS Pyro
6.1 MT 12.5 5 1 16412
86 100001758 Wire braided hose rubber pipe with
MS/SS CLZS Pyro
1.6 MT 12.5 5 1 836
87 100001839 SCRAP SPRS with Accessories CLZS Pyro
1 LOT
12.5 5 1 80000
88 100001898 SCRAP PUMP/VLV
PARTS,ALLOY20,CN7M,20CB3 CLZS Pyro
1.5 MT 12.5 5 1 33750
89 100002108 Scrap mixed metal (cable) CLZS Pyro
8.0 MT 12.5 5 1 58926
90 100002138 TELEPHONE EXCHANGE 432 LINES
EPABX G 3 CLZS Pyro
1 Lot 12.5 5 1 180
91 100002178 ELECTRICAL SCRAP (TRANSFORMER) CLZS Pyro
1.9 MT 12.5 14.5 1 15010
92 100002209 OLD & USED 1 MT WEIGHING SCALE CLZS Pyro
2 NO 12.5 5 1 4400
93 100002228 STAINLESS STEEL SCRAP -SS 446 CLZS Pyro
1.8 MT 12.5 5 1 7089
94 100002258 EMPTY PLASTIC DRUMS 110 LTR CAP CLZS Pyro
190 NO 0 5 1 6270
95 100002330 Scrap Filter Cloth Bundle CLZS Pyro
5.4 MT 12.5 5 1 2156
96 100002349 Scrap SS braid.hose(PVC/MS/Rbr
attached) CLZS Pyro
0.7 MT 12.5 5 1 2952
97 100002378 Copper scrap with attachment CLZS Pyro
0.7 MT 12.5 5 1 16875
98 100002438 Plastic Strips (HDPE/PP/Polyolefin
etc.) CLZS Pyro
1.3 MT 12.5 5 1 5642
99 100002458 scrap used optical fiber cable CLZS Pyro
0.4 MT 12.5 14.5 1 1242
100 100002468 MS with rubber attachment CLZS Pyro
5.4 MT 12.5 14.5 1 6444
101 100002538 Scrap empty oil paint ms drum ( only
for Registered recyclers) CLZS Pyro
10.0 MT 12.5 5 1 10000
102 100002558 SCRAP AIR FILTER CLZS Pyro
1.1 MT 12.5 5 1 172
103 100002598 SCRAP SS INCO 600 WITH MINOR
ATTACHMENT CLZS Pyro
0.2 MT 3800
104 100001059 MS SCRAP(LIGHT MS,STRAP,CAGE) DSC 15.9 MT 12.5 5 1 21411
105 100000002 SCRAP EMPTY DRUMS (MS) 210 LTR
CAP DSC 564 NO 0 5 1 18725
106 100000069 Scrap Electrical Mixed Cables DSC 10.9 MT 12.5 5 1 87200
107 100000944 SS SCRAP (HOSES) DSC 2,500 KG 12.5 5 1 20000
108 100002108 Scrap mixed metal (cable) DSC 3.2 MT 12.5 5 1 70469
109 100000021 SCRAP ALUMINIUM CABLES DSC 1.4 MT 12.5 5 1 6869
22 / 30
110 100000042 HDPE / Plastic & their Pipe Scrap DSC 1.9 MT 12.5 5 1 3813
111 100000848 HDPE LINER SCRAP DSC 9.2 MT 12.5 5 1 9240
112 100000179 MS WITH SS ATTACHMENT DSC 0.0 MT 12.5 5 1 48
113 100000638 MS WITH RCC/SLURRY/FRP/RUBBER
ETC. DSC 1.0 MT 12.5 5 1 1373
114 100000272 SCRAP PVC DSC 2.3 MT 12.5 5 1 5453
115 100000114 FRP SCRAP DSC 1.1 MT 12.5 5 1 5
116 100000037 USED / SCRAP MAGNESIUM CHROME
BRICKS DSC 300.0 MT 12.5 5 1 30000
117 100001688 Scrap PPH pipes and fittings DSC 2.8 MT 12.5 5 1 6762
118 100000288 G.I. SCRAP (IRON) DSC 1.8 MT 12.5 5 1 3094
119 100000032 SCRAP LANCING PIPES DSC 2.5 MT 12.5 5 1 4600
120 100000009 SCRAP CONVEYOR BELTS DSC 11.3 MT 12.5 14 1 68010
121 100000068 RUBBER SCRAP AND CUT PIECES
CONVEYOR BEL DSC 9.2 MT 12.5 14 1 9220
122 100001219 SCRAP POLYAMIDES & PVC
MEMBRANE DSC 7.4 MT 12.5 5 1 3700
123 100000909 CUT PLASTIC DRUMS DSC 4.6 MT 12.5 5 1 9618
124 100001798 SCRAP PVC STRIP DSC 1.0 MT 12.5 5 1 3896
125 100000218 Scrap Machinery / Equipment DSC 2.6 MT 12.5 5 1 5850
126 100000115 MISC. ELE./ INST. ITEMS SCRAP DSC 7.0 MT 12.5 5 1 45370
127 100002588 Scrap,Conveyor Chain,Carbon Steel DSC 21.6 MT 12.5 5 1 46785
128 100000019 CAST IRON SCRAP DSC 45.8 MT 12.5 5 1 80150
129 100001629 SCRAP, STAINLESS STEEL - SS 304/321 DSC 6,150 KG 12.5 5 1 55350
130 100000073 Mixed sludge(Waste oil) DSC 3.5 MT 0 5 1 1672
131 100001159 E-waste (OLD COMPUTERS AND IT
SPARES) DSC 1.3 MT 0 5 1 1310
132 100001059 MS SCRAP(LIGHT MS,STRAP,CAGE, GI SHEET (For Lifting Min. 1 truck load or
3 MT cap. ) ZSD 4.2 MT 5500
133 100000001 M.S. SCRAP with Pipes (Hammering
allowed) ZSD 37.7 MT 78835
134 100000019 CAST IRON SCRAP ZSD 6.9 MT 15501
135 100000006 ALUMINIUM SCRAP (with GI) ZSD 0.9 MT 5922
136 100001108 ALUMINIUM POWDER SCRAP ZSD 1.0 MT 6633
137 100000015 BEARINGS SCRAP ZSD 1.6 MT 5230
138 100000009 SCRAP CONVEYOR BELTS ZSD 1.2 MT 5127
139 100000588 SCRAP ELECTRICAL PANELs_NGR ZSD 1.4 MT 4984
140 100000006 ALUMINIUM SCRAP (Bar) ZSD 0.4 MT 2520
141 100000848 HDPE LINER SCRAP ZSD 0.9 MT 3922
142 100000272 SCRAP PVC ZSD 1.3 MT 2159
143 100000218 Scrap Machinery / Equipment ZSD 0.8 MT 1802
144 100000931 Scrap RadiaMTr With MS attachment ZSD 0.1 MT 1617
145 100000638 MS WITH RUBBER ZSD 0.6 MT 752
146 100000014 SCRAP TYRES (ASSORTED SIZE) ZSD 0.4 MT 542
147 100000581 GRAPHIT SCRAP ZSD 0.2 MT 277
148 100001308 SCRAP OIL & AIR FILTER ZSD 0.4 MT 8
149 NPA SCRAP - REFRIGERATOR ZSD 1.000 NO 1000
150 100000251 COMPUTER HARDWARE WITH
PERIPHERALS - Ewaste Certified only ZSD 1.000
LOT
1500
151 100000017 FILTER CLOTH SCRAP ZSD 0.4 MT 84
152 100000059 EMPTY PLASTIC JERRYCAN CAP. 20/30
LITS. ZSD
159.000
NO 398
23 / 30
153 100000029 GLASS / ACID BOTTLES - SCRAP ZSD 1830.000
KG 183
154 100000028 BULBS / TUBE LIGHT SCRAP ZSD 30.00
0 KG 3
155 100000009 SCRAP CONVEYOR BELTS ZCPP 2.5 MT 12.50%
5.00%
1.00%
17750
156 100000059 Empty Plastic Jerrycan- Cap.- 20/30
LITS ZCPP
378.00
NO NIL 5.00
% 1.00%
2306
157 100000125 Scrap Gas Cylender (Chlorine) (RPCB
PARTY ONLY) ZCPP 2.0 MT
12.50%
5.00%
1.00%
20
158 100000810 EMPTY PLASTIC JERRYCAN CAP.50
LTRS BLUE ZCPP 35.00 NO NIL
5.00%
1.00%
515
159 100001388 Scrap Grinding Roller ZCPP 2.0 MT 12.50%
5.00%
1.00%
4400
160 100002108 SCRAP COPPER CABLES (without
wooden) ZCPP 2.5 MT
12.50%
14.50%
1.00%
23250
161 100002328 Scrap PVC Fills ZCPP 4.0 MT 12.50%
5.00%
1.00%
40
162 100000248 SCRAP WIRE ROPE RDM 18,267.44
KG 12.50%
5% 1% 34708
163 100002278 SCRAP BUTTON BITS RDM 340 KG 12.50%
5% 1% 7140
164 100000005 BRASS SCRAP RDM 280 KG 12.50%
5% 1% 9380
165 100000001 M.S. SCRAP RDM 40.0 MT 12.50%
5% 1% 78000
166 100000068 RUBBER SCRAP AND CUT PIECES
CONVEYOR BEL RDM 23.0 MT
12.50%
14.50%
1% 24380
167 100000007 SCRAP M.S.PIPE (TWO lots) -
hammering & cutting allowed RDM 18.0 MT
12.50%
5% 1% 36000
168 100001059 MS SCRAP(LIGHT MS,STRAP,CAGE) -
hammering & cutting allowed RDM 15.0 MT
12.50%
5% 1% 19500
169 100000014 SCRAP TYRES (ASSORTED SIZE) RDM 9.0 MT 12.50%
14.50%
1% 9990
170 100000022 RUBBER / RUBBER WITH M.S.ATTACH
SCRAP RDM 6.0 MT
12.50%
14.50%
1% 6900
171 100000588 SCRAP ELECTRICAL PANELs RDM 6.0 MT 12.50%
5% 1% 22740
172 100000157 M.S.RAILS SCRAP RDM 4.0 MT 12.50%
5% 1% 8200
173 100001639 Hi Chrome Scrap ( Pump Parts ) RDM 4.0 MT 12.50%
5% 1% 13680
174 100000063 BURNT OIL RDM 3.0 MT NA 5% 1% 9936
175 100000009 SCRAP CONVEYOR BELTS RDM 4.0 MT 12.50%
14.50%
1% 5000
176 100000218 Scrap Machinery / Equipment RDM 3.0 MT 12.50%
5% 1% 6960
177 100000015 BEARINGS SCRAP RDM 3.0 MT 12.50%
5% 1% 9450
178 100000019 CAST IRON SCRAP RDM 2.5 MT 12.50%
5% 1% 5750
179 100001878 Scrap MS Shaft & Pulley different size RDM 2.5 MT 12.50%
5% 1% 5775
180 100001158 SCRAP FURNITURE (MIXED IRON&
WOOD) RDM 1.5 MT NA 5% 1% 1500
181 100000021 SCRAP ALUMINIUM CABLES RDM 15.0 MT 12.50%
5% 1% 76950
182 100000002 SCRAP EMPTY DRUMS (MS) 210 LTR
CAP (DEMAGE) RDM 40 NO NA 5% 1% 1700
183 100000002 SCRAP EMPTY DRUMS (MS) 210 LTR
CAP (FRESH) RDM 80 NO NA 5% 1% 2600
24 / 30
184 NPA G.B Car Scrap ( 9 Nos) RDM 31.0 MT 12.50%
5% 1% 69750
185 NPA G.B Car Scrap ( 2 Nos) G.B. Car Scrap (2 Nos.)
RDM 5.0 MT 12.50%
5% 1% 11250
186 NPA
Lab items as per list- (1)Hollow cathode lamp copper muffer(2)
RegulaMTr 2 STG Oxy(3) Stand for IVEF Fusion(4) Heater Mental(5)
Raymond Mini Mill (6) Counter Scale (7) Metter Balance Model BB2400(8)
Pan Balance M.No.PM 600
RDM 0.5 MT 12.50%
5% 1% 250
187 NPA BICYCLE ATLAS RDM 0.0 MT NIL 2.5%
NIL 20
188 NPA TATA HGV TATA,S MODEL 4X2 RJ 30
GA 0138/rj27g0680 RDM 5.0 MT NIL
2.5%
NIL 11000
189 NPA TATA AMBULANCE RJ 30 E 1194 RDM 5.0 MT NIL 2.5%
NIL 11000
190 NPA CEILING FAN RDM 0.3 MT 12.50%
5% 1% 1376
191 NPA DCE 500 AMMONIA SYNCHRONIES &
DEVELOPER RDM 0.5 MT
12.50%
5% 1% 990
192 NPA 5KVA UPS SYSTEM WITH SMF
BATTERY (Required E-WEASTE) RDM 0.2 MT
12.50%
5% 1% 374
193 NPA 1.WATER ANALYSIS KIT 2.HOT PLATE
RECTANGULAR 3.TI-58REFECTROJ FURNANCE
RDM 0.1 MT 12.50%
5% 1% 231
194 NPA column cell (MS SCRAP) (CUTTING
ALLOWED) RDM 20.0 MT
12.50%
5% 1% 43000
195 NPA VARIAN SPECTRA10 BQ SINGLE BEAM
SPETROPHOMTMETER RDM 0.2 MT
12.50%
5% 1% 396
196 NPA TATA FIRE BRIGADE RJ30G2370 RDM 8.0 MT NIL 2.5%
NIL 28000
197 NPA AMBULANCE VAN RJ 30 GA0059 RDM 2.8 MT NIL 2.5%
NIL 10080
198 NPA MARUTI ZYPSY RJ 27 1267 RDM 0.9 MT NIL 2.5%
NIL 7553
199 NPA TATA TRUCK 104 RJ30 GA 0285 RDM 2.6 MT NIL 2.5%
NIL 9472
200 NPA MAHNINDRA JEEP RJ 30 C 2138 RDM 1.2 MT NIL 2.5%
NIL 2995
201 NPA
1.WELDING MACHINE TYP 3200-1 no 2.Welding machine-1 no
3.Pipe bending machine-1 no 4.Oil cooled welding rransformer set-1 no
5.invenuim induction heater model hi 1303-1 no
RDM 1.1 MT 12.50%
5% 1% 3534
202 NPA
1.FURNANCE-2 NO. 2.GEYSER-1NO. 3.HEATING ELEMENT-1NO. 4.GAS
ANALYSIS APPRATUS-4NO. 5.HP METER-3NO. 6. WEIGHING
BALANCE -2 NO. 7.REFRIGERAMTR-1 NO
RDM 0.8 MT 12.50%
5% 1% 1600
203 NPA
1.liquid roaMTr starter for 110kw moMTr-1no. 2. 5.5kw drive moMTr
frame size qu 132 s4-30nos. 3.11kw crive moMTr freme size qu
160-20nos. 4.62kw1500rpm dc moMTr-4nos.
5.137kw drive moMTr -1no.
RDM 7.3 MT 12.50%
5% 1% 39930
204 NPA ELECTRIC LHD WAGNOR NO 4 MODEL
SCOOPTRAM EST 3.5 RDM 14.4 MT
12.50%
5% 1% 33028
25 / 30
205 NPA BOBCAT skid steer loder model s130 RDM 2.4 MT 12.50%
5% 1% 6075
206 100000003 MANGANESE STEEL LINERS SCRAP SKM 18.0 MT 12.50%
5.00%
1.00%
49680
207 100000004 COPPER SCRAP SKM 310 KG 12.50%
5.00%
1.00%
8556
208 100000009 SCRAP CONVEYOR BELTS SKM 5.0 MT 12.50%
14.50%
1.00%
8499
209 100000015 BEARINGS SCRAP SKM 0.5 MT 12.50%
5.00%
1.00%
1744
210 100000018 STAINLESS STEEL SCRAP (grade 304) SKM 140 KG 12.50%
5.00%
1.00%
1134
211 100000209 MIXED BATTERY SCRAP SKM 2,524.
00 KG
12.50%
5.00%
1.00%
9465
212 100000215 SCRAP RADIATOR SKM 2,510 KG 12.50%
5.00%
1.00%
55722
213 100000237 SCRAP DRILL RODS ASSORTED SIZE
with bit SKM 1.0 MT
12.50%
5.00%
1.00%
4220
214 100000444 MISC. ELECTRICAL SCRAP SKM 1.1 MT 12.50%
5.00%
1.00%
6446
215 100000022 RUBBER / RUBBER WITH M.S.ATTACH
SCRAP SKM 13.0 MT
12.50%
14.50%
1.00%
8580
216 100000638 MS WITH RUBBER ETC. SKM 3.4 MT 12.50%
5.00%
1.00%
4644
217 100001069 BURNT TRANSFORMER OIL SKM 0.4 MT 5.00
% 1.00%
1593
218 100001258 WASTE GREASE SKM 3.0 MT 12.50%
5.00%
1.00%
1778
219 100001478 GRINDING ROD & media SCRAP SKM 19.1 MT 12.50%
5.00%
1.00%
46413
220 100001639 Hi Chrome Scrap ( Pump Parts ) SKM 9.3 MT 12.50%
5.00%
1.00%
33157
221 100002108 Scrap mixed metal (cable) SKM 0.8 MT 12.50%
5.00%
1.00%
14820
222 100002478 SCRAP RUBBER TUBE FOR TYRE SKM 500 KG 12.50%
14.50%
1.00%
1550
223 100002548 SCRAP VALVES SKM 7,370 KG 12.50%
5% 1.00%
18425
224 100000838 SCRAP SHANK ADOPTOR(Approxe
3.85*859) SKM 3200 KG
12.50%
5.00%
1.00%
50864
225 100000839 SCRAP COUPLING SLEEVE(Approxe
1.9*133) SKM 250 KG
12.50%
5.00%
1.00%
1513
226 100000288 SCRAP GI SCRAP SKM 2.9 MT 12.50%
5.00%
1.00%
5997
227 100001072 SCRAP ELECTRICAL MOMTRS & PARTS SKM 0.3 MT 12.50%
5.00%
1.00%
1098
228 100001308 SCRAP OIL & AIR FILTER SKM 9.3 MT 12.50%
5.00%
1.00%
931
229 100001608 SCRAP BUTTON BIT (BIG SIZE)(Approxe2 KG*400)
SKM 375 NO 12.50%
5.00%
1.00%
33188
230 100002248 SCRAP EMPTY PLASTIC DRUMS 1100
LTR CAP SKM 4 NO
5.00%
1.00%
860
231 100002322 Scrap tyres Nylon assorted size SKM 5.1 MT 12.50%
14.50%
1.00%
9177
232 100002323 Scrap tyre Radial SKM 23.5 MT 12.50%
14.50%
1.00%
18118
233 100000002 Scrap empty drums 210 ltr cap SKM 850 No 5% 1.00%
38250
234 100001609 SCRAP BUTTON BIT (Small
SIZE)(GENERATION BASIS MONTHLY QTY 250 NO)
SKM 1800 No 12.50%
5.00%
1.00%
21600
235 NPA Rotor Starter Panel 440 Volts LT SKM 100 Kg 220
26 / 30
236 NPA L T Distribution Panel 440 Volts LT SKM 100 Kg 220
237 NPA Transformer 500 KVA - Wissen
Transformer and Rectifier SKM 1500 Kg 13500
238 NPA
HT COMPRESSOR 2500 CFT complete with moMTrs and accessories, pipe lines, starters , ducts etc - 2H4 BIS
1083 2 H B4 600 rpm
SKM 22.0 MT 59400
239 NPA
HT COMPRESSOR 600 HP 2500 CFT complete with moMTrs and
accessories, pipe lines, starter and ducts - 2HB4B1S
SKM 22.0 MT 59400
240 NPA Kirloskar make Slip ring motor 90 KW 1475 rpm for compressor 1050 CFT -
2781164-2 SKM 600 Kg 2490
241 NPA LPDT-1 Sandvik EJC-522 - 4050 SKM 15.0 MT 34950
242 NPA LPDT-3 Sandvik EJC-522 - 4110 SKM 15.0 MT 30750
243 10000009
1 USED / BURNT OIL WITH DRUM Kayar 16 TO Nil 5% 1% 58880
244 10000175
0 Light MS Scrap of packing material Kayar 6 TO Nil 5% 1% 13500
245 100000001 MS Scrap ( Inclu-Big and small size of
MS pipe,Hammering and cutting allowed ),
RAM 50.0 MT 12.50%
5% 1% 101500
246 100000001 MS Scrap Mud & Cement filled (Hammering & cutting allowed,)
RAM 35.0 MT 12.50%
5% 1% 59150
247 100000005 BRASS SCRAP with MS & plastic
Attachment RAM
180.00
KG 12.50%
5% 1% 5490
248 100000006 ALUMINIUM SCRAP with MS
Attachment RAM 0.7 MT
12.50%
5% 1% 6475
249 100000008
RUBBER SCRAP (RUBBER SCRAP hoses & Pipes with minor attachement of SS
& MS / V-belt / Small pieces of conveyor belt)
RAM 18.0 MT 12.50%
14.5%
1% 5760
250 100000009 SCRAP CONVEYOR BELTS (>3 Mtr
rolls) RAM 11.0 MT
12.50%
14.5%
1% 37400
251 100000017 FILTER CLOTH SCRAP RAM 8.0 MT 12.50%
5% 1% 6400
252 100000018 STAINLESS STEEL SCRAP with MS
attachment RAM
1100.00
KG 12.50%
5% 1% 8745
253 100000019 CAST IRON SCRAP with MS, Rubber attachment (Hammering allowed)
RAM 14.0 MT 12.50%
5% 1% 26740
254 100000019 Misc valves with aluminium,SS
attachment etc RAM 0.5 MT
12.50%
5% 1% 1750
255 100002108 Scrap mixed metal (Cable) RAM 3.5 MT 12.50%
5% 1% 45500
256 100000021 SCRAP ALUMINUM CABLE RAM 4.0 MT 12.50%
5% 1% 22880
257 100000021 SCRAP ALUMINUM WIRE RAM 2.0 MT 12.50%
5% 1% 16000
258 100000025 SCRAP ASSORTED SIZE BATTERIES
(Require CPCB Certificate) RAM 5.0 MT
12.50%
5% 1% 21300
259 100000029 Empty Glass bottle, Bulbs & Tube light
scrap RAM
2000.00
KG Nil 5% 1% 200
260 100000115 MISC. ELE./ INST. ITEMS SCRAP RAM 2.0 MT 12.50%
14.5%
1% 1040
261 100000237 SCRAP DRILL RODS Big SIZE
(Hammering & cutting allowed) RAM 7.0 MT
12.50%
5% 1% 16800
262 100000248 SCRAP WIRE ROPE with wooden RAM 4500.
00 KG
12.50%
5% 1% 9450
263 100000638 MS with Rubber attach Scrap
(Hammering & cutting allowed) RAM 20.0 MT
12.50%
5% 1% 31400
27 / 30
264 100000810 EMPTY PLASTIC JERRYCAN CAP.05-50
LTRS RAM 70.00 NO Nil 5% 1% 441
265 100000931 Scrap RadiaMTr of MS Scrap, with
Brass,Copper attachment RAM 3.5 MT
12.50%
5% 1% 25270
266 100000931 MS RadiaMTr Scrap RAM 0.5 MT 12.50%
5% 1% 2990
267 100000931 Scrap RadiaMTr of Aluminium RAM 0.5 MT 12.50%
5% 1% 2990
268 100001072 SCRAP ELECTRICAL MOMTRS & Pump
PARTS RAM 2.0 MT
12.50%
14.5%
1% 7320
269 100001308 SCRAP OIL & AIR FILTER (Require
CPCB Certificate) RAM 2.6 MT
12.50%
5% 1% 481
270 100001449 SCRAP MISC. PLASTIC,POLYTH,PLASTIC
STRIP RAM 2.5 MT Nil 5% 1% 5375
271 100001478 GRINDING ROD SCRAP RAM 3.0 MT 12.50%
5% 1% 6210
272 100001519 Scrap Engines, Transmission of HEMM
eqpt RAM 1.5 MT
12.50%
5% 1% 5805
273 100001608 SCRAP BUTTON BIT (BIG SIZE) RAM 221.0
0 NO
12.50%
5% 1% 35360
274 100001609 SCRAP BUTTON BIT (SMALL SIZE) RAM 28.00 NO 12.50%
5% 1% 1400
275 100001688 Scrap PPH pipes and fittings with Mud
& Cement filled RAM 0.6 MT
12.50%
5% 1% 1320
276 100001878 Scrap MS Shaft & Pulley different size
(Hammering Allowed) RAM 8.0 MT
12.50%
5% 1% 17200
277 100002248 SCRAP EMPTY PLASTIC DRUMS 1100
LTR CAP RAM 16.00 NO Nil 5% 1% 2224
278 100002308 Scrap Copper Chowk without drum RAM 300.0
0 KG
12.50%
14.5%
1% 2490
279 100002478 SCRAP RUBBER TUBE FOR TYRE RAM 500.0
0 KG
12.50%
14.5%
1% 1950
280 100002322 Scrap tyre Nylon (ASSORTED SIZE) RAM 10.00 KG 12.50%
14.5%
1% 12100
281 100002323 Scrap tyre Radial (ASSORTED SIZE) RAM 17.0 MT 12.50%
14.5%
1% 13566
282 NPA Scrap compressor with spares RAM 18.0 MT 12.50%
5% 1% 54000
283 NPA Guest house items & school furniture
etc. RAM 5.0 MT Nil 5% 1% 5000
284 NPA Wooden Chair,Desk,Table etc RAM 0.4 MT Nil 5% 1% 400
285 NPA AircondiMTners window/Split 1.5,
2,2.5 MTn etc & Water Cooler 40/80/150 Ltrs
RAM 4.0 MT 12.50%
14.50%
1% 8800
286 NPA Blower (LP) RAM 9.0 MT 12.50%
5% 1% 22500
287 NPA Water Sprinkler No-04
(M/C S.no.-251) RAM 35.0 MT
12.50%
5% 1% 45500
288 NPA MOMTR GRADER NO.-04( M/C S.NO-
3107) RAM 25.0 MT
12.50%
5% 1% 52500
289 NPA ForkLift-3 Ton RAM 1.00 NO 12.50%
5% 1% 25000
290 100000002 SCRAP EMPTY DRUMS (MS) 210 LTR
CAP (oil & chemical) ZWM
600.000
NO nil 5% 1% 24300
291 100000003 MANGANESE STEEL LINERS SCRAP ZWM 25.0 MT 12.50%
5% 1% 77000
292 100000006 ALUMINIUM SCRAP ZWM 0.4 MT 12.50%
5% 1% 3200
293 100000007 SCRAP M.S.PIPE (Cutting &
hammering allowed) ZWM 13.0 MT
12.50%
5% 1% 26000
294 100000008 RUBBER SCRAP ZWM 19.0 MT 12.50%
14% 1% 15200
28 / 30
295 100000009 SCRAP CONVEYOR BELTS ZWM 8.0 MT 12.50%
14% 1% 24960
296 100000014 SCRAP TYRES (ASSORTED SIZE) ZWM 9.0 MT 12.50%
14% 1% 12150
297 100000016 NI-HARD SCRAP (Pump Parts) ZWM 2.2 MT 12.50%
5% 1% 8437
298 100000022 RUBBER / RUBBER WITH M.S.ATTACH
SCRAP ZWM 18.0 MT
12.50%
14% 1% 31230
299 100000157 M.S.RAILS SCRAP ZWM 16.0 MT 12.50%
5% 1% 32640
300 100000213 SCRAP ELECTRIC METER ZWM 190.0
00 KG
12.50%
14% 1% 703
301 100000218 Scrap Machinery / Equipment
(Cutting & hammering allowed) ZWM 8.0 MT
12.50%
5% 1% 17040
302 100000248 SCRAP WIRE ROPE ZWM 16000
.0 KG
12.50%
5% 1% 31200
303 100001750 Light MS Scrap of packing material etc (Three location) including paint drum
20 ltr and oil tin etc. ZWM 4.0 MT nil 5% 1% 5600
304 100001810 SCRAP SUBMERSIBLE PUMP ZWM 2.0 MT 12.50%
5% 1% 9720
305 100002278 SCRAP BUTTON BITS ZWM 180.0
00 KG
12.50%
5% 1% 2160
306 100002468 MS with rubber attachment (Cutting
& hammering allowed) ZWM
27.000
MT 12.50%
5% 1% 34560
Please Note: -
All interested bidders are requested to inspect the items before the auction. It will be assumed that customers participating in the auction have inspected the materials prior to the auction.
No complaints regarding difference in material quality or quantity will be entertained.
Materials sold would be under “as is where is” basis.
Appropriate MoEF /PCB certificate has to be submitted wherever applicable for securing participation.
Scanned copy of Signed Declaration (as attached at the end of this document) has to reach Mjunction representatives as mentioned on the cover page over Email by 4:00 PM on the day before the respective auction to secure participation.
29 / 30
2. Time Slots
Lot Nos. Time slot
Date Time Slot 1 - 30 23rd June, 2015 11:00 AM - 12:00 noon
31 - 60 23rd June, 2015 12:00 noon - 12:45 PM
61 - 90 23rd June, 2015 12:45 PM - 1:30 PM
91 - 120 23rd June, 2015 1:30 PM - 2:15 PM
121 -150 23rd June, 2015 2:15 PM - 3:00 PM
151 - 180 23rd June, 2015 3:00 PM - 3:45 PM
181 - 210 23rd June, 2015 3:45 PM – 4:30 PM
211 - 240 24th June, 2015 11:00 AM - 12:00 noon
241 - 270 24th June, 2015 12:00 noon - 12:45 PM
271 - 306 24th June, 2015 12:45 PM - 1:30 PM
30 / 30
Note- All entries compulsory
DECLARATION DATE:
To ……………………… ……………………… ……………………… Dear Sirs,
1. I/We, the bidder/s do hereby state that, I/We have read the entire terms and conditions of the online Tender catalog for
Sale including the disclaimer clauses and understood them fully. I/We, hereby unconditionally agree to conform with and to be bound by the said terms and conditions and agree to take part in the tender.
2. I/We further declare that I/We intend to purchase the above-referred material from Hindustan Zinc Limited for our own use/business and that the information revealed by me/us in this acceptance form is true and correct to the best of my/our belief. I/We understand and agree that if any of the statement/information revealed by me/us is found to be incorrect and/or untrue, the bid/s submitted by me/us is liable to be cancelled and in such case the CMD/ Earnest Money Deposit paid by me/us is liable to be forfeited by the seller and the seller will be at liberty to annul the offer made to me/us at any point of time.
3. I/We also agree that after my/our offer/bid placed by me/us for purchase of the material is accepted by the seller and I/we fail to accept or act upon the terms & conditions of the offer letter or am /are not able to complete the transaction within the time limit specified in the offer letter for any reason whatsoever and/or fail to fulfill any/all the terms & conditions of the Tender catalog and offer letter, the CMD / Earnest Money Deposit and any other monies paid by me/us along with the tender and thereafter, are liable to be forfeited by the seller and that the seller has also a right to proceed against me/us for specific performance of the contract, if so desired by the seller.
4. The decisions taken by representatives of seller shall be binding on me. 5. I also undertake to abide by the additional conditions if announced during the Tender including the announcement of
correction in catalogue and/or additions or deletions of items being offered for sale. 6. We are hereby submitting CMD of Rs.____________ (Rupees ___________ only) vide RTGS/NEFT.
No.___________________________ dated ___________ drawn on _____________________ (Bank) in favour of “_________________________“for participating in the above mentioned Online Forward Auction no.
VJ/HZL/15-16/20 against Lot numbers ____________________________________________________________
Company / Firm / Person / concern
Contact Person(s)
Designation
Address
Sales Tax / VAT Registration No. / TIN No.
PAN No
Phone No.
Mobile No
E-Mail Have you received training for e-
Tender/online bidding? YES / NO
Participating in Lot Nos
If NO, attending a Training session OR Mock Tender cum E-auction with prior appointment is mandatory. And in an event the Mock Tender cum E-Tender is not attended, NO COMPLAINTS will be entertained.
Date: Place: Signature of Authorized Signatory with Name and Seal.