valve features optionsslurry, pump discharge, gypsum management, and more. • cement, sand, gravel....

elitevalve.comVISIT US ONLINE TODAY AT

2305 Wyecroft Rd. Oakville, ON L6L 6R2 | Local: (519) 756-3100 Toll-Free: (888) 339-7758 | [email protected] |

E5900 Urethane Lined Knife Gate Valve

Valve Features

• Zero leakage. Fully lined urethane valve body and molded elastomer gate seal prevents leakage both from the gate and valve body during the design life.

• Extended wear-life. High quality abrasive resistant urethane liners, and robust stainless knife gates as well as the unique design of the valve itself, provide an extremely long service life.

• Bi-directional shut-off. When back flow happens the E5900 can handle it.

• Self-flushing design. During valve closing the beveled knife gate redirects the flowing slurry towards the beveled urethane liner seat, developing turbulence and intensifying the flow. This flushes the slurry out of the bottom of the urethane as the gate settles into the seat.

• Convenient rebuilds. When rebuilds are finally necessary, the wear-parts (urethanes, gate seals, knife gates) can all be replaced in field. Valve bodies and other parts are reusable.

Options

• Liners – Varieties of urethanes are available.

• Gates – 304SS gates with hard chrome coating are standard. Other alloys are available (316SS, 410SS, 416SS, 17-4PH…) Optional gate coatings are also available.

• 2"–24" sizes are standard. Other sizes are available.

• Optional actuators are available.

Elite Valve’s E5900 Urethane Lined Knife Gate Valve is full lined with high quality urethane, which far exceeds the wear-life of gum rubber and any other softer liner, or sleeve materials in fine particle applications.



E5900 Urethane Lined Knife Gate ValveAbrasive Resistant Knife Gate Valve/Wenzhou Newsway Valve Co.,Ltd/www.nsw-valve.com

ASNSI #150 D (in) D1 (in) N-M L (in) H (in) D0 (in) HC (in) AC (in) EL (in) BG (in)

2 6.5 4.8 4 x 5/8"-11 1.88 14.4 11.0 2.0 3.9 5.7 6.9

2.5 7.3 5.3 4 x 5/8"-11 1.88 15.6 11.0 2.0 3.9 5.7 6.9

3 7.9 6.0 4 x 5/8"-11 2.00 16.2 11.0 2.5 4.9 5.7 6.9

4 9.0 7.5 8 x 5/8"-11 2.00 17.7 11.0 2.5 4.9 5.7 6.9

5 10.0 8.5 8 x 3/4"-10 2.25 20.1 11.0 2.5 6.3 5.7 6.9

6 11.0 9.5 8 x 3/4"-10 2.25 21.7 12.6 3.1 6.3 7.3 8.3

8 13.5 11.8 8 x 3/4"-10 2.75 25.2 12.6 3.1 7.9 7.3 8.3

10 16.0 14.3 12 x 7/8"-9 2.75 31.1 15.7 3.1 9.8 7.3 11.8

12 19.0 17.0 12 x 7/8"-9 3.00 35.0 15.7 3.1 9.8 7.3 11.8

14 20.5 18.4 12 x 1"-8 3.00 39.0 – 3.9 12.6 8.9 11.8

16 22.8 21.3 16 x 1"-8 3.50 42.9 – 3.9 12.6 8.9 13.8

18 25.2 22.8 16 x 1-1/8"-7 3.50 47.2 – 4.7 12.6 8.9 13.8

20 27.5 25.0 20 x 1-1/8"-7 4.50 52.0 – 4.7 13.8 10.8 16.3

24 33.1 29.5 20 x 1-1/4"-7 4.50 57.1 – 5.5 15.7 10.8 16.3



E5900 Urethane Lined Knife Gate Valve

Applications

• Mining – ball mills, hydro-cyclones, tailings, flotation, thickeners, and more.

• Power generation, scrubber isolation, bottom ash slurry, pump discharge, gypsum management, and more.

• Cement, sand, gravel.

• Paper.

• Alumina.

• Wastewater treatment.

Elite Valve’s E5900 Urethane Lined Knife Gate Valve is a reliable solution of heavy duty slurry applications. Contact us now to know more about the E5900 Urethane Lined Knife Gate Valve.

valve features optionsslurry, pump discharge, gypsum management, and more. • cement, sand, gravel....

Documents