vamsi

3
RESUME Vamsi Talla, B.Tech Department of Electronics and Communication Engineering, IIT Guwahati Email: [email protected] , [email protected] WORK EXPERIENCE Associate, iRunway India Private Limited (November 2009 – September 2010) High-end technical consultant in Patent litigations in the domain of telecommunications, networking, software, semiconductor processing and integrated circuits. Served as IP consultant for Fortune 500 Corporation in IP Landscaping and Patent Portfolio analysis. Served as technical analyst for Fortune 500 corporation in due diligence, Open Source code and source code analysis. ACADEMIC QUALIFICATIONS B.Tech, Electronics and Communication Engineering. Indian Institute of Technology (IIT), Guwahati, India (2005-2009). Cumulative Performance Index - 9.01/10. Thesis : - “A Surface Acoustic Wave based Humidity Sensor". RESEARCH INTERESTS Nanoelectronics and Memory devices. MEMS and NEMS. Nanofabrication, Semiconductor devices and processing. Integrated Circuits and VLSI. RESEARCH EXPERIENCE Research Internship, Nano Systems Laboratory, University of Manitoba (October- November 2009). Design, modeling and testing of a Micromachined Electric Field sensor based on Thermal actuators”. FEM based modeling using COMSOL multiphysics to characterize the resonant frequency and sensitivity of the sensor. Proposed an alternate efficient lever mechanism for amplification of the thermal actuator motion thereby increasing the sensitivity and reducing power consumption (under implementation). Design and testing of a self resonating circuit for the physical testing of Micromachined electric field sensor. Guide: Prof. Dr. Cyrus Shafai, Professor, Electrical and Computer Engineering Department, University of Manitoba. Undergraduate Thesis, Indian Institute of Technology, Guwahati , India (Aug 2008-April 2009). Development of Nanoparticle based Surface Acoustic Wave humidity sensor’. Study of Mass Loading effects of pNIPAAm nanoparticles on SAW devices (SAW delay line and SAW resonator) with humidity change. Design and analysis of a feedback oscillator for development of integrated SAW humidity sensor based on pNIPAAm Nanoparticles. Guide: Prof. H.B. Nemade, Associate Professor, ECE Department, IIT Guwahati.

Upload: edgar-bell

Post on 20-Jul-2016

13 views

Category:

Documents


2 download

DESCRIPTION

cv

TRANSCRIPT

Page 1: vamsi

RESUME Vamsi Talla, B.Tech

Department of Electronics and Communication Engineering, IIT Guwahati Email: [email protected], [email protected]

WORK EXPERIENCE

Associate, iRunway India Private Limited (November 2009 – September 2010) High-end technical consultant in Patent litigations in the domain of telecommunications,

networking, software, semiconductor processing and integrated circuits. Served as IP consultant for Fortune 500 Corporation in IP Landscaping and Patent Portfolio

analysis. Served as technical analyst for Fortune 500 corporation in due diligence, Open Source code and

source code analysis.

ACADEMIC QUALIFICATIONS

B.Tech, Electronics and Communication Engineering. Indian Institute of Technology (IIT), Guwahati, India (2005-2009). Cumulative Performance Index - 9.01/10. Thesis: - “A Surface Acoustic Wave based Humidity Sensor".

RESEARCH INTERESTS

Nanoelectronics and Memory devices. MEMS and NEMS. Nanofabrication, Semiconductor devices and processing. Integrated Circuits and VLSI.

RESEARCH EXPERIENCE

Research Internship, Nano Systems Laboratory, University of Manitoba (October- November 2009). ‘Design, modeling and testing of a Micromachined Electric Field sensor based on Thermal

actuators”. FEM based modeling using COMSOL multiphysics to characterize the resonant frequency and

sensitivity of the sensor. Proposed an alternate efficient lever mechanism for amplification of the thermal actuator motion

thereby increasing the sensitivity and reducing power consumption (under implementation). Design and testing of a self resonating circuit for the physical testing of Micromachined electric

field sensor. Guide: Prof. Dr. Cyrus Shafai, Professor, Electrical and Computer Engineering Department,

University of Manitoba.

Undergraduate Thesis, Indian Institute of Technology, Guwahati, India (Aug 2008-April 2009). ‘Development of Nanoparticle based Surface Acoustic Wave humidity sensor’. Study of Mass Loading effects of pNIPAAm nanoparticles on SAW devices (SAW delay line and

SAW resonator) with humidity change. Design and analysis of a feedback oscillator for development of integrated SAW humidity sensor

based on pNIPAAm Nanoparticles. Guide: Prof. H.B. Nemade, Associate Professor, ECE Department, IIT Guwahati.

Page 2: vamsi

Research Internship, North Carolina State University (May-July 2008).

‘Development of driver for Shape Memory Alloy (SMA) Actuators with simultaneous electric power control and resistance reading’.

Designed and implemented a micro controller based PWM based power control system for SMA micro-wires which takes instantaneous resistance reading for feedback, thus, eliminating the need for external sensors for feedback based control of SMA wires.

Used a constant current source instead of conventional voltage source for PWM control for design of a compact system.

Study of Electro-mechanical behaviour of a shape memory alloy actuator. Guide: Prof. Stefan Seelecke, Associate Professor, Mechanical and Aerospace Engineering

Department, NCSU.

Junior Year Internship, Computer Science Department, University of Auckland (July 2007) Development and testing of exercises on image stitching, anaglyph, projections and mapping of

panoramic images. Guide: Prof Reinhard Klette, Chair, Information Technology, Computer Science Department,

University of Auckland. Undergraduate Research Project, Centre for Nanotechnology, IIT Guwahati (May–December 2007)

‘Information Storage using Color Imprints at Nanometer Resolution’. Multicolor imprints results in use of multi- bit storage scheme enabling higher bit density. A micrometer resolution experiment was successfully undertaken to demonstrate feasibility. Special coding schemes for efficient storage were developed. Color based storage technology was proved to be superior to CD and DVD technology. Guide: Dr. Arun Chattopadhyay, Professor, Department of Chemistry and Centre for

Nanotechnology, IIT Guwahati.

Winter Training, Bhabha Atomic Research Centre, Bombay. (December 2006) Image analysis of a rotating triangular plane and analysis of Optics of a complex periscope setup Software was developed to calculate the instantaneous axis of rotation and also correct the

counter rotation inculcated by the periscope optics. Guide: Dr J.K.Mukherjee, Scientific Officer (H), Control and Instrumentation division, BARC.

PUBLICATIONS

Talla Vamsi, Rahul Sangwan and Arun Chattopadhyay. "A new way of information storage using red, green, blue and black color imprints", Vol. 15(4), April 2009, Microsystem Technologies, Springer.

Matthew E. Pausley, Stefan J. Furst, Talla Vamsi and Stefan Seelecke. "Electro-mechanical behaviour of a

shape memory alloy actuator". Proceedings of the SPIE, Vol. 7289, 72890T (2009).

N. Ramakrishnan, Talla Vamsi, Aslam Khan, Harshal B. Nemade and Roy Paily Palathinkal. “Humidity

Sensor using pNIPAAm Nanoparticles as Sensing Medium in SAW Devices”, Special Issue of International Journal of Nanoscience, World Scientific Publishing Company (In Press).

Talla Vamsi, Suhas Mishra and J.S. Sahambi. "EOG based Text Communication System for the physically

disabled and speech Impaired”. Proceedings of BME Days 2008 at Surabaya (Indonesia), 11- 12 November 2008.

Talla Vamsi, Nimish Kulshrestha and Amit Kumar Mishra. “Optimized hardware implementation of

Kuwahara filter”. Under review in IETE Technical Review.

Page 3: vamsi

PROJECTS &TECHNICAL PAPERS

Undergraduate Design Project, Indian Institute of Technology, Guwahati, India (Jan-April 2008). ‘EOG based Text Communication system for the physically handicapped and speech impaired’.

“Development of Nanostructures by the use of commercially available CD’s and DVD’s”. Guided by Dr.

Arun Chattopadhyay, Professor, Department of Chemistry and Centre for Nanotechnology, IIT Guwahati.

“Simulation and modeling of Shear SAW sensors for liquid sensing applications.” Self Initiated Project. Term papers on “VLSI architecture of Kuwahara filter for Noise Removal of Images” and “MEMS

Packaging” guided by Prof. Amit Mishra, ECE Department, IIT Guwahati.

Presented “Silicon based MEMS device and processing” at the Indo-German Winter Academy 2008 chaired by Prof. Heiner Ryssel, University of Erlangen – Nuremberg, Germany.

Presented ``Information Storage using Color Imprints`` at the Nanotechnology Systems Laboratory

Lecture Series, University of Manitoba.

ACHIEVEMENTS

The Color based information storage technology covered by Nanowreck under the ‘spotlight’ section titled ‘Technology of storing information using true colors’ for innovation and future potential. http://www.nanowerk.com/spotlight/spotid=7881.php

Presented “EOG Based Text Communication System for the physically handicapped and speech impaired"

project at national level for Innovative Student Project Award by Indian National Academy of Engineering.

Among the few selected to participate in the prestigious Indo-German Winter Academy 2008, a technical symposium jointly conducted by seven IIT’s and University of Erlangen – Nuremberg, Germany.

Lead a 4-member team and won 3rd prize in Semi Autonomous Robotics at Techniche `07 (Annual Techno-Management fest of IIT Guwahati).

Awarded Certificate of Merit by CBSE for being among the top .01% students in Mathematics and Science in AISCE and Mathematics in AISSCE.

POSITIONS HELD AND EXTRA-CURRICULAR ACTIVITIES

Lead a team of 12 people in managing “In Phase”, student magazine of ECE dept by serving as the Editor-in-Chief from March 2008 to February 2009. Also, member of the core editorial team responsible for the inception of “In Phase” magazine in October 2007.

Batch 2005 student representative in the DUPC (Departmental undergraduate program committee) of ECE dept, IIT Guwahati for August 2007- May 2008 term and re-elected for August 2008- May 2009 term.

Held the post of Editor PI-TECH, PAN-IIT magazine (IIT Guwahati chapter).

Actively involved in sporting activities at inter hostel and inter batch level. Member of the winning team at Inter Batch Badminton Championship 2007.

Active member of the publicity team of Techniche 2006 (Annual Techno-Management fest of IIT Guwahati) and Cepstrum (student society of ECE Dept, IIT Guwahati).