vanguard wrap-around packer - standard-knappstandard-knapp.com/downloads/333/333-vanguard-...

Vanguard Wrap-Around Packer - Standard-Knappstandard-knapp.com/downloads/333/333-Vanguard- Wrap-Around Packer The compact, reliable solution for corrugated, full wrap-around packing
Vanguard Wrap-Around Packer - Standard-Knappstandard-knapp.com/downloads/333/333-Vanguard- Wrap-Around Packer The compact, reliable solution for corrugated, full wrap-around packing
Vanguard Wrap-Around Packer - Standard-Knappstandard-knapp.com/downloads/333/333-Vanguard- Wrap-Around Packer The compact, reliable solution for corrugated, full wrap-around packing
Download Vanguard Wrap-Around Packer - Standard-Knappstandard-knapp.com/downloads/333/333-Vanguard- Wrap-Around Packer The compact, reliable solution for corrugated, full wrap-around packing

Post on 27-May-2018

214 views

Category:

Documents

0 download

Embed Size (px)

TRANSCRIPT

  • 5 ft side sweep conveyor pattern-forming product infeed case forming area

    tray magazine

    sealing area

    glue system

    product flow

    7 ft

    8

    main electricalpanel

    Optional Equipment

    Auto-lubrication

    Panelview 1000+ withgraphically driven HMI

    Side-sweep infeed toeasily match end-userconveyors

    Remote panel

    Copyright 2015 Standard-Knapp, Inc. 0215-250

    * Standard-Knapp is committed to continuous product improvement. Specifications are subject to change based on product line conditions or customer requirements.** Depending on product and case.

    Vanguard Wrap-Around Packer

    The compact, reliable solution for corrugated, full wrap-around packing

    Model:

    Speed:

    Infeed Style:

    Product Lanes:

    Product Types:

    Case/Tray Types:

    Case/Tray Sizes:

    Wrap Dimensions:

    Retrieval Control:

    333 Vanguard Packer

    Up to 30 cycles per minute**

    Butt Connect or Side

    Sweep onto 5' extension

    1 8 lanes

    Single, Multi-Pack, Glass,Plastic, Round, Non-Round

    Corrugated

    694" min; 131814" max

    694" min; 131814" max

    High-Volume Suction

    Main Control Panel:

    Interface:

    System Control:

    Electrical Supply:

    Air Supply:

    Lubrication:

    Infeed Drive:

    Indexing Conveyor:

    Retrieval Control:

    Glue Type:

    NEMA 12, Machine Mounted

    Allen-Bradley PanelView

    Allen-Bradley ControlLogix

    460VAC 3-phase 60Hz

    80psi with 1/2" NPT

    Point, Cluster or Automatic

    2 HP

    Servo-Driven Lug Chain

    Servo-Driven Lift, Vacuum Hold

    Hot Glue with Spray Application

    STANDARD-KNAPP, INC.63 Pickering Street, Portland, CT 06480 U.S.A.SALES: (860) 342-1100, ext. 239SALES FAX: (860) 342-1557EMAIL: info@standard-knapp.comwww.standard-knapp.com

    8 ft

    25 FT 7 IN (inc 5 ft ext)

    m

    Vanguard Specifications*The Standard-Knapp Vanguard features a stainless steel packer frame, clustered lubrication fittings,servo-driven flow, pneumatic-driven handling, and a compact, wrap-around design.

    333 Vanguard Floor Plans (all values approximate)

  • Robust ConstructionStainless steel tubular frame

    High ReliabilityDesigned for 24/7 operation

    Simple OperationFast, easy operation

    Easy Walk-by MaintenanceSee-through safety guarding

    Flexible and AdaptableTo future applications

    Quality Fit and FinishSolid Appearance &

    Reliable Operation

    The Wrap-Around Packing Process

    TM

    VanguardWrap-Around

    Packer

    High-volume suctionsecures the traywhile the productdrop forms it.

    Pneumatic pistonspress the flapstogether to ensure astrong, reliable seal.

    Precision, multi-cavityglue heads spray hot glueonto front and side flaps.

    As the formed tray moves fromthe forming area toward thegluing area, the top flap hingeis guided down toward the tray.

    Snap-in change parts and high-visibilityindicators and scales ensure accurate,

    repeatable changeover.

    Vanguard provides full corrugated wrap-around packing. Pneumatically-controlledtop and side actuation provide complete

    control over compression. Delicateproducts are fully protected.

    Note: The electrical and operator panels can be remote-mounted for ease of access and flexibility.

    Product comes in directly overthe tray blank. This eliminatesside push and unnecessaryimpact on the product.

    Case/Tray magazine is crank-adjusted for easy changeover.

    Clear, Lexan guards providehigh-visibility protectionthroughout the system.

    Welded tube frame andinterlocked doors provide asteady platform and a safe workenvironment.

    High-volume/low-pressure blowersprovide strong vacuum for reliable blank

    selection and positive control.

    The electrical panel is equippedwith program controls, servo

    drives, pneumatic controllers, andsafety-system monitoring. The operator interface, which

    provides complete system control,is mounted at a good workingheight and angle for ease of use.

    Standard-Knapps Model 333 Vanguardproduces a tight, square, cost-savingwrap-around tray or full case shipper.

    The compact design allows it to fitinto any shop floor. Snap-in parts andquick-handle adjustments providereliable, repeatable changeover.

    The wide product packagingrange includes:

    Cans Metal/composite CartonsBottles (glass or plastic) Multi-packsRound or Non-round Tubs VacuumGable top Aseptic packs

    Wide mouth, flexible vacuum cups andhigh-volume suction ensure consistant

    blank selection and forming.

    Model 333 Vanguard

    Packing CompressionGluingFolding

  • 5 ft side sweep conveyor pattern-forming product infeed case forming area

    tray magazine

    sealing area

    glue system

    product flow

    7 ft

    8

    main electricalpanel

    Optional Equipment

    Auto-lubrication

    Panelview 1000+ withgraphically driven HMI

    Side-sweep infeed toeasily match end-userconveyors

    Remote panel

    Copyright 2015 Standard-Knapp, Inc. 0215-250

    * Standard-Knapp is committed to continuous product improvement. Specifications are subject to change based on product line conditions or customer requirements.** Depending on product and case.

    Vanguard Wrap-Around Packer

    The compact, reliable solution for corrugated, full wrap-around packing

    Model:

    Speed:

    Infeed Style:

    Product Lanes:

    Product Types:

    Case/Tray Types:

    Case/Tray Sizes:

    Wrap Dimensions:

    Retrieval Control:

    333 Vanguard Packer

    Up to 30 cycles per minute**

    Butt Connect or Side

    Sweep onto 5' extension

    1 8 lanes

    Single, Multi-Pack, Glass,Plastic, Round, Non-Round

    Corrugated

    694" min; 131814" max

    694" min; 131814" max

    High-Volume Suction

    Main Control Panel:

    Interface:

    System Control:

    Electrical Supply:

    Air Supply:

    Lubrication:

    Infeed Drive:

    Indexing Conveyor:

    Retrieval Control:

    Glue Type:

    NEMA 12, Machine Mounted

    Allen-Bradley PanelView

    Allen-Bradley ControlLogix

    460VAC 3-phase 60Hz

    80psi with 1/2" NPT

    Point, Cluster or Automatic

    2 HP

    Servo-Driven Lug Chain

    Servo-Driven Lift, Vacuum Hold

    Hot Glue with Spray Application

    STANDARD-KNAPP, INC.63 Pickering Street, Portland, CT 06480 U.S.A.SALES: (860) 342-1100, ext. 239SALES FAX: (860) 342-1557EMAIL: info@standard-knapp.comwww.standard-knapp.com

    8 ft

    25 FT 7 IN (inc 5 ft ext)

    m

    Vanguard Specifications*The Standard-Knapp Vanguard features a stainless steel packer frame, clustered lubrication fittings,servo-driven flow, pneumatic-driven handling, and a compact, wrap-around design.

    333 Vanguard Floor Plans (all values approximate)