vaporizer s calibration

1
August 2007 IACUC Tip Sheet Calibration of Anesthetic Machine Vaporizers All anesthesia and monitoring equipment must be maintained in good working condition to assure optimal anesthetic agent delivery in a safe manner. Anesthesia equipment includes anesthesia machines and vaporizers, and stand alone vaporizers. Examples of monitoring equipment include: EKG, pulse oximetry, and end tidal CO2 devices. The primary standard for vaporizer recalibration / certification is to be governed by manufacturer’s recommendations. If manufacturer’s recommendations are not available, the equipment must be validated annually. If the equipment has been out of service for more than one year, it must be validated before being put into service. Certification consists of the inspection and approval of all mechanics associated with the vaporizer and anesthesia machine. Calibration consists of the scientific analysis of the emitted gas and insuring the accuracy of the concentration settings and subsequent correction as needed. Waste anesthesia gas must be scavenged. The scavenging equipment must be maintained in good working order to ensure a safe working environment. Active scavenging is preferred and can be done by use of dedicated evacuation systems or house vacuum, (if house vacuum is exhausted directly outside the building to the atmosphere). Passive scavenging may be accomplished using a Vaporguard canister or comparable scavenging. If charcoal filters are used for scavenging they must be weighed before and after each use. All anesthesia and monitoring equipment is to be serviced by a qualified personnel or an authorized service center. Certification should include an inspection of the entire anesthetic machine, not just the vaporizer. Qualified personnel must be experienced in clinical equipment maintenance, service and certification. Vaporizer Calibration services are available from: Keomed [Dave Olsen; 1-800-328-6216; cell: 612-270-9416] Draeger (services only Draeger machines and vaporizers):800 4-DRAGER (437-2437) Service for all anesthesia machines and vaporizers: Eagle Eye Anesthesia: 800-760-6976 IGN Medical: 888-256-2723 Vetamac: 800-334-1583 Anesthesia Equipment Services, 1-800-809-8499; only comes three times a year, January, spring and fall and only does work during these times by appointment. Additional information : http://www.research.umn.edu/iacuc/

Upload: muslim1583

Post on 18-Dec-2015

219 views

Category:

Documents


3 download

DESCRIPTION

kalibrasi

TRANSCRIPT

  • August 2007

    IACUC Tip Sheet Calibration of Anesthetic Machine Vaporizers

    All anesthesia and monitoring equipment must be maintained in good working condition to assure optimal anesthetic agent delivery in a safe manner. Anesthesia equipment includes anesthesia machines and vaporizers, and stand alone vaporizers. Examples of monitoring equipment include: EKG, pulse oximetry, and end tidal CO2 devices. The primary standard for vaporizer recalibration / certification is to be governed by manufacturers recommendations. If manufacturers recommendations are not available, the equipment must be validated annually. If the equipment has been out of service for more than one year, it must be validated before being put into service. Certification consists of the inspection and approval of all mechanics associated with the vaporizer and anesthesia machine. Calibration consists of the scientific analysis of the emitted gas and insuring the accuracy of the concentration settings and subsequent correction as needed. Waste anesthesia gas must be scavenged. The scavenging equipment must be maintained in good working order to ensure a safe working environment. Active scavenging is preferred and can be done by use of dedicated evacuation systems or house vacuum, (if house vacuum is exhausted directly outside the building to the atmosphere). Passive scavenging may be accomplished using a Vaporguard canister or comparable scavenging. If charcoal filters are used for scavenging they must be weighed before and after each use. All anesthesia and monitoring equipment is to be serviced by a qualified personnel or an authorized service center. Certification should include an inspection of the entire anesthetic machine, not just the vaporizer. Qualified personnel must be experienced in clinical equipment maintenance, service and certification. Vaporizer Calibration services are available from: Keomed [Dave Olsen; 1-800-328-6216; cell: 612-270-9416] Draeger (services only Draeger machines and vaporizers):800 4-DRAGER (437-2437) Service for all anesthesia machines and vaporizers: Eagle Eye Anesthesia: 800-760-6976 IGN Medical: 888-256-2723 Vetamac: 800-334-1583 Anesthesia Equipment Services, 1-800-809-8499; only comes three times a year, January, spring and fall and only does work during these times by appointment.

    Additional information : http://www.research.umn.edu/iacuc/

    /ColorImageDict > /JPEG2000ColorACSImageDict > /JPEG2000ColorImageDict > /AntiAliasGrayImages false /CropGrayImages true /GrayImageMinResolution 300 /GrayImageMinResolutionPolicy /OK /DownsampleGrayImages true /GrayImageDownsampleType /Bicubic /GrayImageResolution 300 /GrayImageDepth -1 /GrayImageMinDownsampleDepth 2 /GrayImageDownsampleThreshold 1.50000 /EncodeGrayImages true /GrayImageFilter /DCTEncode /AutoFilterGrayImages true /GrayImageAutoFilterStrategy /JPEG /GrayACSImageDict > /GrayImageDict > /JPEG2000GrayACSImageDict > /JPEG2000GrayImageDict > /AntiAliasMonoImages false /CropMonoImages true /MonoImageMinResolution 1200 /MonoImageMinResolutionPolicy /OK /DownsampleMonoImages true /MonoImageDownsampleType /Bicubic /MonoImageResolution 1200 /MonoImageDepth -1 /MonoImageDownsampleThreshold 1.50000 /EncodeMonoImages true /MonoImageFilter /CCITTFaxEncode /MonoImageDict > /AllowPSXObjects false /CheckCompliance [ /None ] /PDFX1aCheck false /PDFX3Check false /PDFXCompliantPDFOnly false /PDFXNoTrimBoxError true /PDFXTrimBoxToMediaBoxOffset [ 0.00000 0.00000 0.00000 0.00000 ] /PDFXSetBleedBoxToMediaBox true /PDFXBleedBoxToTrimBoxOffset [ 0.00000 0.00000 0.00000 0.00000 ] /PDFXOutputIntentProfile () /PDFXOutputConditionIdentifier () /PDFXOutputCondition () /PDFXRegistryName () /PDFXTrapped /False

    /Description > /Namespace [ (Adobe) (Common) (1.0) ] /OtherNamespaces [ > /FormElements false /GenerateStructure false /IncludeBookmarks false /IncludeHyperlinks false /IncludeInteractive false /IncludeLayers false /IncludeProfiles false /MultimediaHandling /UseObjectSettings /Namespace [ (Adobe) (CreativeSuite) (2.0) ] /PDFXOutputIntentProfileSelector /DocumentCMYK /PreserveEditing true /UntaggedCMYKHandling /LeaveUntagged /UntaggedRGBHandling /UseDocumentProfile /UseDocumentBleed false >> ]>> setdistillerparams> setpagedevice