variable speed rotary screw compressors · variable speed rotary screw compressors. l ... †...

4
INTELLIGENT AIR TECHNOLOGY L_VS-AIR STATION L11VS – L18VS VARIABLE SPEED ROTARY SCREW COMPRESSORS

Upload: trinhdien

Post on 15-Apr-2018

268 views

Category:

Documents


7 download

TRANSCRIPT

Page 1: VARIABLE SPEED ROTARY SCREW COMPRESSORS · VARIABLE SPEED ROTARY SCREW COMPRESSORS. l ... † CompAir AirSmart™ controller ... A Gardner Denver CompanyA Gardner Denver C

INTELLIGENT AIR TECHNOLOGY

L_VS-AIRSTATION

L11VS – L18VS

VARIABLE SPEED ROTARY SCREW COMPRESSORS

Page 2: VARIABLE SPEED ROTARY SCREW COMPRESSORS · VARIABLE SPEED ROTARY SCREW COMPRESSORS. l ... † CompAir AirSmart™ controller ... A Gardner Denver CompanyA Gardner Denver C

lllll

REMARKABLE ENERGY SAVINGS UNDER ALL OPERATING CONDITIONS

Typically air demand in the working environment varies widely throughout Typically air demand in the working environment varies widely throughout

the day. The L_VS series of variable speed compressors are able to the day. The L_VS series of variable speed compressors are able to

precisely match power consumption with the system air demand, offering precisely match power consumption with the system air demand, offering

outstanding efficiency and reliability. The L_VS drive system offers softoutstanding efficiency and reliability. The L_VS drive system offers sof

starting with smooth and controlled acceleration and deceleration, reducingstarting with smooth and controlled acceleration and deceleration, reducing

the stress on both the electrical and mechanical components. The ability the stress on both the electrical and mechanical components. The ability

of maintaining air system pressure at an exact pre set level eliminates theof maintaining air system pressure at an exact pre set level eliminates the

need to operate within pressure bands, enhancing efficiency even further.need to operate within pressure bands, enhancing efficiency even further.

ENCY ENCY HIGH EFFICIE HIGH EFFICIE““ SSZERO LOSSZERO LOSS““ ””

EEINLET VALVEINLET VALVE

MODERN AUTOMATIC BELT-TENSIONING SYSTEM PROVEN INTEGRATED HIGH PROVEN INTEGRATED HIGH

EFFICIENCY AIR END UNITEFFICIENCY AIR END UNIT

HIGH PERFORMANCE HIGH PERFORMANCECOOLING SYSTEMCOOLING SYSTEMCOOLING SYCOOLING

OPTIMIZED ENERGY EFFICIENCYwith advanced AirSmart™h advanced AirSmart™

control system and integratecontrol system and integrated d

frequency converterfrequency converter

LOW NOISE LEVEL ENCLOSURE65 – 71 dB(A) @ 7 bar full load65 – 71 dB(A) @ 7 bar full load65 – 71 dB(A) @ 7 bar, full load65 – 71 dB(A) @ 7 bar, full load

AIRSMART™ CONTROL SYSTEM

L11VS – L18VS compressors are easy to use,L11VS – L18VS compressors are easy to use

thanks to the new and advanced AirSmart™h k t th d d d Ai S t

controller. You don’t need to be an expert on

variable speed drives to operate the CompAir

L_VS compressors. The controller takes care

of the details. It auto matically adjusts the

compressor performance to meet your

changing air system demands and saves

your energy costs.

AirSmart™ control system also includesAirSmart™ control system also includes

• Smart energy cost calculationS t t l l ti

• Pressures from 3 to 13 bar

• Integrated sequencing option

• Clear text indicator display

• Multiple languages

• Prevention of reverse rotation

INTEGRATED REFRIGERANT DRYER OPTION

Page 3: VARIABLE SPEED ROTARY SCREW COMPRESSORS · VARIABLE SPEED ROTARY SCREW COMPRESSORS. l ... † CompAir AirSmart™ controller ... A Gardner Denver CompanyA Gardner Denver C

COMMUNICATION AND SEQUENCING

The optional communication module allows the AirSmart™

units to talk to each other. This isn’t just an hour-balancing,

on/off sequencing function. Our controller allows the

system to truly optimize the efficiency because it knows s

the capabilities of the other machines and controls their th

operation. The communication module also allows

remote monitoring of the L_VS and fixed speed units,

providing better energy efficiency in part load operation.p

MAXIMUM FLEXIBILITY

Thanks to the new highly functional AirSmart™ control T

system, the new L11VS – L18VS series allows you to

choose any delivery pressure from 3 to 10 bar orc

from 10 to 13 bar depending on model. Options includefr

the i ntegrated refrigerant dryer, condensate handling

equipment and a wide selection of compressed air filters.e

These options are available to enable you to build aT

complete compressor station for your needs.c

LOW NOISE LEVELL

The sound-engineered enclosure of L11VS – L18VS

absorbs noise effectively. The package is so quiet, that ita

can be installed exactly where it is needed without any

special consideration for noise. This series is simply as

smart design with high quality parts. Quiet fan, segregated s

cooling air flow, plus motor and air end are isolated to

prevent noise transmission.p

SUPERB REGULATION RANGES

Flexibility comes as standard with the L_VS series.

With a 15 – 100% capacity range, the L_VS series features

quick and wide response to air demand changes.

EASY MAINTENANCE

This series has an advanced automatic belt-tensioning

system, which gives the optimal belt-tension in all

conditions. Due to its compact enclosure, the series

requires limited floor space and the installation of the

package is quick and efficient.

The use of high quality compoonents guarantees a long

service life. CompAir has a nettwork

of trained service providers

available whenever required too

ensure your compressor achieeves

the highest level of reliability.

YOUR BENEFITS FROM OUR L_VS TECHNOLOGY• Exact adjustment to air and pressure requirement

• No need for over-pressure

• Rapid reaction to demand changes

• Wide capacity regulation range

• Constant working pressure

• Smooth start technology

Minimum floor space required

Integrated refrigerant dryer option

L11VS AIRSTATION

COST OF COMPRESSED AIR OVER 5 YEARS

THE L_VS SERIES: SMARTER SOLUTION TO YOUR COMPLEX NEEDS

8 %

6 %

61 % 25 %

Maintenanceand ServiceCosts

Investment

Energy Cost

Energy saving

Ordinance

onIndustrial Safeff tyy and Health ((

BetrSi

chVGermany)This

product fulfils RL 89/655/EW

G

Maxim

umin

spec

tion validityt period frff or m

CompAirto

thecustomer· 5 YeYY arsr ·

High quality receiverBuilt to the highest standard

EN87/404 and AD2000.

Inspection free for 5 years.

Page 4: VARIABLE SPEED ROTARY SCREW COMPRESSORS · VARIABLE SPEED ROTARY SCREW COMPRESSORS. l ... † CompAir AirSmart™ controller ... A Gardner Denver CompanyA Gardner Denver C

[email protected] Brochure re-order ref.: 98700-569E B&N 05/09Brochure re-order ref.: 98700-569E B&N 05/09

CompAir policy is one of continuous improvement and we therefore reserve the right

to alter specifications and prices without prior notice. All products are sold subject

to the Company’s conditions of sale.

L11 VS – L18VS VARIABLE SPEED SCREW COMPRESSORSTYPE L11VS L15VS L18VS

Maximum target pressure 1) bar g 7.5 10 13 7.5 10 13 7.5 10 13

psig 115 145 190 115 145 190 115 145 190

Capacity at working pressure 2) m3/min 0.15 –1.63 0.24 –1.44 0.33 – 1.11 0.39 – 2.64 0.46–2.24 0.38–1.73 0.48–3.14 0.44–2.83 0.51–2.16

cfm 5 – 58 8 – 51 12 – 39 14 – 93 16 – 79 13 – 61 17 – 111 15 – 100 18 – 76

Motor power kW 11 17 21

hp 15 23 28

Noise level @ full load 3) db (A) 65 66 66 68 68 67 71 70 70

DIMENSIONS

Size (Length x Width x Height) mm 1180 x 660 x 860 1434 x 854 x 1105 1434 x 854 x 1105

Net weight compressor only (with dryer) kg 315 (345) 495 (550) 520 (575)

DIMENSIONS AIRSTATION

Size with receiver (Length x Width x Height) mm 1591 x 660 x 1355 N/A N/A

Airstation net weight without dryer (with dryer) 420 (450) N/A N/A

Receiver capacity ltr 270 N/A N/A

Pressure range bar 7–10 N/A N/A

1) For integrated dryer models max. pressure is 0.25 bar less. Pressure dew point of integrated dryer at reference conditions: +3°C. Reference conditions: intake airtemperature for dryer: +35°C, ambient temperature: +25°C. For 13 bar model, maximum target pressure is 12.8 bar with unload limit 13 bar.

2) Capacity and Power measurements according to ISO 1217, ed. 3, Annex C -1996 test code and the following working pressures are used: 7.5 bar models at 7 bar, 10 bar models at 9 bar and 13 bar models at 12 bar.

3) o se a ues dete ed acco d g to SO 5 ; o e a ce 3 d ( )se a ues dete ed acco d g to SO 5 ; o e a ce 3 d ( )Noise values determined according to ISO 2151; Tolerance ±3 dB(A).

DIN ISO 9001/EN 29001

Certificate: 5168

STANDARD EQUIPMENTSTANDARD EQUIPMENT• Air inlet filter• Air inlet filter• Belt drive, automatic belt-tensioning• Belt drive, automatic belt-tensioning• Fully automatic capacity control: variable speed air Fully automatic capacity control: variable speed air

production based on system air demandproduction based on system air demand• CompAir AirSmart™ controller• CompAir AirSmart™ controller

– Easy to use operator interface– Easy to use operator interface– Multiple languagesMultiple languages

• EMC filterEMC fil• High efficiency AC inverter drive• High efficiency AC inverter drive• High efficiency electric motors: IP 55, F-class insulation,• High efficiency electric motors: IP 55, F-class insulation,

thermistor protectionthermistor protection• Emergency stopt• Safety devices forf

– Motor over temperature– Motor over temperature– Compressor over temperature– Compressor over temperature– Compressor over pressure– Compressor over pressure– Current limiterCurrent limiter

• Alarms forms for– Compressor over temperature– Compressor over temperature

(alarm at 105˚C and tripping at 110 – 115˚C)(alarm at 105˚C and tripping at 110 – 115˚C)– Service interval– Service interval

• Oil thermostatOil thermosta• Running condition indicators: • Running condition indicators:

– Pressures, temperatures– Pressures, temperatures– Hour meter; total running hours, full load hours– Hour meter; total running hours, full load hours

• Automatic re-start after power failureAutomatic re-start after power failure• Epoxy powder coated enclosure• Epoxy powder coated enclosure• After cooler and moisture separator with automatic drain• After cooler and moisture separator with automatic drain• Integrated high efficiency air end Integrated high efficiency air end

OPTIONAL EQUIPMENT• Int• Integrated dryer; the refrigerant used in the integrated dryers egrated dryer; the refrigerant used in the integrated dryers

fulfils the EC norm No 2037/2000 requirementsfulfils the EC norm No 2037/2000 requirements• Additional I/O ports• Additional I/O ports• Communications / sequencing module• Communications / sequencing module• Multiple lubricant options• Multiple lubricant options• Zero loss drain• Zero loss drain• Receiver 270 l• Receiver 270 litre (up to 11 bar)itre (up to 11 bar)

AUXILIARY EQUIPMENTressed air after treatment products• Compressed air after treatment products

ASSURE™ EXTENDED WARRANTY – FREE OF CHARRRGE

CompAir offers comprehensive servicceeand warranty programmes. All youneed to do is: register to the programme, use genuine CompAirparts, adhere to the recommended service schedule.

A Gardner Denver CompanyA Gardner Denver C